ltc2978.c 10.2 KB
Newer Older
1
/*
2
 * Hardware monitoring driver for LTC2978 and LTC3880
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
 *
 * Copyright (c) 2011 Ericsson AB.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include "pmbus.h"

29
enum chips { ltc2978, ltc3880 };
30

31
/* LTC2978 and LTC3880 */
32 33 34 35 36
#define LTC2978_MFR_VOUT_PEAK		0xdd
#define LTC2978_MFR_VIN_PEAK		0xde
#define LTC2978_MFR_TEMPERATURE_PEAK	0xdf
#define LTC2978_MFR_SPECIAL_ID		0xe7

37
/* LTC2978 only */
38 39 40 41
#define LTC2978_MFR_VOUT_MIN		0xfb
#define LTC2978_MFR_VIN_MIN		0xfc
#define LTC2978_MFR_TEMPERATURE_MIN	0xfd

42 43 44 45 46
/* LTC3880 only */
#define LTC3880_MFR_IOUT_PEAK		0xd7
#define LTC3880_MFR_CLEAR_PEAKS		0xe3
#define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4

47 48
#define LTC2978_ID_REV1			0x0121
#define LTC2978_ID_REV2			0x0122
49 50
#define LTC3880_ID			0x4000
#define LTC3880_ID_MASK			0xff00
51 52 53 54 55 56 57 58 59 60 61 62 63

/*
 * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
 * happens pretty much each time chip data is updated. Raw peak data therefore
 * does not provide much value. To be able to provide useful peak data, keep an
 * internal cache of measured peak data, which is only cleared if an explicit
 * "clear peak" command is executed for the sensor in question.
 */
struct ltc2978_data {
	enum chips id;
	int vin_min, vin_max;
	int temp_min, temp_max;
	int vout_min[8], vout_max[8];
64 65
	int iout_max[2];
	int temp2_max[2];
66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83
	struct pmbus_driver_info info;
};

#define to_ltc2978_data(x)  container_of(x, struct ltc2978_data, info)

static inline int lin11_to_val(int data)
{
	s16 e = ((s16)data) >> 11;
	s32 m = (((s16)(data << 5)) >> 5);

	/*
	 * mantissa is 10 bit + sign, exponent adds up to 15 bit.
	 * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
	 */
	e += 6;
	return (e < 0 ? m >> -e : m << e);
}

84 85
static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
					 int reg)
86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
{
	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
	struct ltc2978_data *data = to_ltc2978_data(info);
	int ret;

	switch (reg) {
	case PMBUS_VIRT_READ_VIN_MAX:
		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK);
		if (ret >= 0) {
			if (lin11_to_val(ret) > lin11_to_val(data->vin_max))
				data->vin_max = ret;
			ret = data->vin_max;
		}
		break;
	case PMBUS_VIRT_READ_VOUT_MAX:
		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK);
		if (ret >= 0) {
			/*
			 * VOUT is 16 bit unsigned with fixed exponent,
			 * so we can compare it directly
			 */
			if (ret > data->vout_max[page])
				data->vout_max[page] = ret;
			ret = data->vout_max[page];
		}
		break;
	case PMBUS_VIRT_READ_TEMP_MAX:
		ret = pmbus_read_word_data(client, page,
					   LTC2978_MFR_TEMPERATURE_PEAK);
		if (ret >= 0) {
			if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
				data->temp_max = ret;
			ret = data->temp_max;
		}
		break;
121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
	case PMBUS_VIRT_RESET_VOUT_HISTORY:
	case PMBUS_VIRT_RESET_VIN_HISTORY:
	case PMBUS_VIRT_RESET_TEMP_HISTORY:
		ret = 0;
		break;
	default:
		ret = -ENODATA;
		break;
	}
	return ret;
}

static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg)
{
	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
	struct ltc2978_data *data = to_ltc2978_data(info);
	int ret;

	switch (reg) {
140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173
	case PMBUS_VIRT_READ_VIN_MIN:
		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN);
		if (ret >= 0) {
			if (lin11_to_val(ret) < lin11_to_val(data->vin_min))
				data->vin_min = ret;
			ret = data->vin_min;
		}
		break;
	case PMBUS_VIRT_READ_VOUT_MIN:
		ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN);
		if (ret >= 0) {
			/*
			 * VOUT_MIN is known to not be supported on some lots
			 * of LTC2978 revision 1, and will return the maximum
			 * possible voltage if read. If VOUT_MAX is valid and
			 * lower than the reading of VOUT_MIN, use it instead.
			 */
			if (data->vout_max[page] && ret > data->vout_max[page])
				ret = data->vout_max[page];
			if (ret < data->vout_min[page])
				data->vout_min[page] = ret;
			ret = data->vout_min[page];
		}
		break;
	case PMBUS_VIRT_READ_TEMP_MIN:
		ret = pmbus_read_word_data(client, page,
					   LTC2978_MFR_TEMPERATURE_MIN);
		if (ret >= 0) {
			if (lin11_to_val(ret)
			    < lin11_to_val(data->temp_min))
				data->temp_min = ret;
			ret = data->temp_min;
		}
		break;
174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
	case PMBUS_VIRT_READ_IOUT_MAX:
	case PMBUS_VIRT_RESET_IOUT_HISTORY:
	case PMBUS_VIRT_READ_TEMP2_MAX:
	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
		ret = -ENXIO;
		break;
	default:
		ret = ltc2978_read_word_data_common(client, page, reg);
		break;
	}
	return ret;
}

static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg)
{
	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
	struct ltc2978_data *data = to_ltc2978_data(info);
	int ret;

	switch (reg) {
	case PMBUS_VIRT_READ_IOUT_MAX:
		ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK);
		if (ret >= 0) {
			if (lin11_to_val(ret)
			    > lin11_to_val(data->iout_max[page]))
				data->iout_max[page] = ret;
			ret = data->iout_max[page];
		}
		break;
	case PMBUS_VIRT_READ_TEMP2_MAX:
		ret = pmbus_read_word_data(client, page,
					   LTC3880_MFR_TEMPERATURE2_PEAK);
		if (ret >= 0) {
			if (lin11_to_val(ret)
			    > lin11_to_val(data->temp2_max[page]))
				data->temp2_max[page] = ret;
			ret = data->temp2_max[page];
		}
		break;
	case PMBUS_VIRT_READ_VIN_MIN:
	case PMBUS_VIRT_READ_VOUT_MIN:
	case PMBUS_VIRT_READ_TEMP_MIN:
		ret = -ENXIO;
		break;
	case PMBUS_VIRT_RESET_IOUT_HISTORY:
	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
220 221 222
		ret = 0;
		break;
	default:
223
		ret = ltc2978_read_word_data_common(client, page, reg);
224 225 226 227 228
		break;
	}
	return ret;
}

229 230 231 232 233 234 235 236 237 238 239 240 241
static int ltc2978_clear_peaks(struct i2c_client *client, int page,
			       enum chips id)
{
	int ret;

	if (id == ltc2978)
		ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
	else
		ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);

	return ret;
}

242 243 244 245 246 247 248 249
static int ltc2978_write_word_data(struct i2c_client *client, int page,
				    int reg, u16 word)
{
	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
	struct ltc2978_data *data = to_ltc2978_data(info);
	int ret;

	switch (reg) {
250 251 252 253 254 255 256 257
	case PMBUS_VIRT_RESET_IOUT_HISTORY:
		data->iout_max[page] = 0x7fff;
		ret = ltc2978_clear_peaks(client, page, data->id);
		break;
	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
		data->temp2_max[page] = 0x7fff;
		ret = ltc2978_clear_peaks(client, page, data->id);
		break;
258 259 260
	case PMBUS_VIRT_RESET_VOUT_HISTORY:
		data->vout_min[page] = 0xffff;
		data->vout_max[page] = 0;
261
		ret = ltc2978_clear_peaks(client, page, data->id);
262 263 264 265
		break;
	case PMBUS_VIRT_RESET_VIN_HISTORY:
		data->vin_min = 0x7bff;
		data->vin_max = 0;
266
		ret = ltc2978_clear_peaks(client, page, data->id);
267 268 269 270
		break;
	case PMBUS_VIRT_RESET_TEMP_HISTORY:
		data->temp_min = 0x7bff;
		data->temp_max = 0x7fff;
271
		ret = ltc2978_clear_peaks(client, page, data->id);
272 273 274 275 276 277 278 279 280 281
		break;
	default:
		ret = -ENODATA;
		break;
	}
	return ret;
}

static const struct i2c_device_id ltc2978_id[] = {
	{"ltc2978", ltc2978},
282
	{"ltc3880", ltc3880},
283 284 285 286 287 288 289
	{}
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);

static int ltc2978_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{
290
	int chip_id, i;
291 292 293 294 295 296 297
	struct ltc2978_data *data;
	struct pmbus_driver_info *info;

	if (!i2c_check_functionality(client->adapter,
				     I2C_FUNC_SMBUS_READ_WORD_DATA))
		return -ENODEV;

298 299
	data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data),
			    GFP_KERNEL);
300 301 302 303
	if (!data)
		return -ENOMEM;

	chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
304 305
	if (chip_id < 0)
		return chip_id;
306 307 308

	if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) {
		data->id = ltc2978;
309 310
	} else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) {
		data->id = ltc3880;
311 312
	} else {
		dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
313
		return -ENODEV;
314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330
	}
	if (data->id != id->driver_data)
		dev_warn(&client->dev,
			 "Device mismatch: Configured %s, detected %s\n",
			 id->name,
			 ltc2978_id[data->id].name);

	info = &data->info;
	info->write_word_data = ltc2978_write_word_data;

	data->vout_min[0] = 0xffff;
	data->vin_min = 0x7bff;
	data->temp_min = 0x7bff;
	data->temp_max = 0x7fff;

	switch (id->driver_data) {
	case ltc2978:
331
		info->read_word_data = ltc2978_read_word_data;
332 333 334 335 336 337 338 339 340 341
		info->pages = 8;
		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
		for (i = 1; i < 8; i++) {
			info->func[i] = PMBUS_HAVE_VOUT
			  | PMBUS_HAVE_STATUS_VOUT;
			data->vout_min[i] = 0xffff;
		}
		break;
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356
	case ltc3880:
		info->read_word_data = ltc3880_read_word_data;
		info->pages = 2;
		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
		  | PMBUS_HAVE_STATUS_INPUT
		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
		  | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
		  | PMBUS_HAVE_POUT
		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
		data->vout_min[1] = 0xffff;
		break;
357
	default:
358
		return -ENODEV;
359 360
	}

361
	return pmbus_do_probe(client, id, info);
362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379
}

static int ltc2978_remove(struct i2c_client *client)
{
	pmbus_do_remove(client);
	return 0;
}

/* This is the driver that will be inserted */
static struct i2c_driver ltc2978_driver = {
	.driver = {
		   .name = "ltc2978",
		   },
	.probe = ltc2978_probe,
	.remove = ltc2978_remove,
	.id_table = ltc2978_id,
};

380
module_i2c_driver(ltc2978_driver);
381 382

MODULE_AUTHOR("Guenter Roeck");
383
MODULE_DESCRIPTION("PMBus driver for LTC2978 and LTC3880");
384
MODULE_LICENSE("GPL");