xhci-plat.c 8.3 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13
/*
 * xhci-plat.c - xHCI host controller driver platform Bus Glue.
 *
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
 * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
 * A lot of code borrowed from the Linux xHCI driver.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */

14
#include <linux/clk.h>
15
#include <linux/dma-mapping.h>
16
#include <linux/module.h>
17
#include <linux/of.h>
18
#include <linux/platform_device.h>
19
#include <linux/usb/phy.h>
20
#include <linux/slab.h>
21
#include <linux/usb/xhci_pdriver.h>
22
#include <linux/acpi.h>
23 24

#include "xhci.h"
25
#include "xhci-plat.h"
26
#include "xhci-mvebu.h"
27
#include "xhci-rcar.h"
28

29 30
static struct hc_driver __read_mostly xhci_plat_hc_driver;

31 32 33 34
static int xhci_plat_setup(struct usb_hcd *hcd);
static int xhci_plat_start(struct usb_hcd *hcd);

static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
35
	.extra_priv_size = sizeof(struct xhci_plat_priv),
36 37 38 39
	.reset = xhci_plat_setup,
	.start = xhci_plat_start,
};

40 41 42 43 44 45 46
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
	/*
	 * As of now platform drivers don't provide MSI support so we ensure
	 * here that the generic code does not try to make a pci_dev from our
	 * dev struct in order to setup MSI
	 */
47
	xhci->quirks |= XHCI_PLAT;
48 49 50 51 52
}

/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
53 54
	int ret;

55 56
	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) {
57 58 59 60 61
		ret = xhci_rcar_init_quirk(hcd);
		if (ret)
			return ret;
	}

62 63 64
	return xhci_gen_setup(hcd, xhci_plat_quirks);
}

65 66
static int xhci_plat_start(struct usb_hcd *hcd)
{
67 68
	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
69 70
		xhci_rcar_start(hcd);

71 72 73
	return xhci_run(hcd);
}

74 75 76 77 78 79 80
#ifdef CONFIG_OF
static const struct xhci_plat_priv xhci_plat_marvell_armada = {
	.type = XHCI_PLAT_TYPE_MARVELL_ARMADA,
};

static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
	.type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
81
	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
82 83
};

84 85 86 87 88
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
	.type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2,
};

89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
static const struct of_device_id usb_xhci_of_match[] = {
	{
		.compatible = "generic-xhci",
	}, {
		.compatible = "xhci-platform",
	}, {
		.compatible = "marvell,armada-375-xhci",
		.data = &xhci_plat_marvell_armada,
	}, {
		.compatible = "marvell,armada-380-xhci",
		.data = &xhci_plat_marvell_armada,
	}, {
		.compatible = "renesas,xhci-r8a7790",
		.data = &xhci_plat_renesas_rcar_gen2,
	}, {
		.compatible = "renesas,xhci-r8a7791",
		.data = &xhci_plat_renesas_rcar_gen2,
106 107 108
	}, {
		.compatible = "renesas,xhci-r8a7793",
		.data = &xhci_plat_renesas_rcar_gen2,
109 110 111
	}, {
		.compatible = "renesas,xhci-r8a7795",
		.data = &xhci_plat_renesas_rcar_gen3,
112 113 114 115 116 117
	}, {
	},
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif

118 119
static int xhci_plat_probe(struct platform_device *pdev)
{
120 121
	struct device_node	*node = pdev->dev.of_node;
	struct usb_xhci_pdata	*pdata = dev_get_platdata(&pdev->dev);
122
	const struct of_device_id *match;
123 124 125 126
	const struct hc_driver	*driver;
	struct xhci_hcd		*xhci;
	struct resource         *res;
	struct usb_hcd		*hcd;
127
	struct clk              *clk;
128 129 130 131 132 133
	int			ret;
	int			irq;

	if (usb_disabled())
		return -ENODEV;

134
	driver = &xhci_plat_hc_driver;
135 136 137 138 139

	irq = platform_get_irq(pdev, 0);
	if (irq < 0)
		return -ENODEV;

140 141 142 143 144
	/* Try to set 64-bit DMA first */
	if (WARN_ON(!pdev->dev.dma_mask))
		/* Platform did not initialize dma_mask */
		ret = dma_coerce_mask_and_coherent(&pdev->dev,
						   DMA_BIT_MASK(64));
145
	else
146 147 148 149 150 151 152 153
		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));

	/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
	if (ret) {
		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
		if (ret)
			return ret;
	}
154

155 156 157 158
	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd)
		return -ENOMEM;

159
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
160 161 162
	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(hcd->regs)) {
		ret = PTR_ERR(hcd->regs);
163 164 165
		goto put_hcd;
	}

166 167 168
	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

169 170 171 172 173 174 175 176
	/*
	 * Not all platforms have a clk so it is not an error if the
	 * clock does not exists.
	 */
	clk = devm_clk_get(&pdev->dev, NULL);
	if (!IS_ERR(clk)) {
		ret = clk_prepare_enable(clk);
		if (ret)
177
			goto put_hcd;
178 179
	}

180 181 182 183 184 185 186 187 188 189 190
	xhci = hcd_to_xhci(hcd);
	match = of_match_node(usb_xhci_of_match, node);
	if (match) {
		const struct xhci_plat_priv *priv_match = match->data;
		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);

		/* Just copy data for now */
		*priv = *priv_match;
	}

	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) {
191 192 193 194 195
		ret = xhci_mvebu_mbus_init_quirk(pdev);
		if (ret)
			goto disable_clk;
	}

196
	device_wakeup_enable(hcd->self.controller);
197

198
	xhci->clk = clk;
199
	xhci->main_hcd = hcd;
200 201 202 203
	xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
			dev_name(&pdev->dev), hcd);
	if (!xhci->shared_hcd) {
		ret = -ENOMEM;
204
		goto disable_clk;
205 206
	}

207 208 209
	if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
			(pdata && pdata->usb3_lpm_capable))
		xhci->quirks |= XHCI_LPM_SUPPORT;
210

211 212 213
	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
		xhci->shared_hcd->can_do_streams = 1;

214 215 216 217 218 219 220 221 222 223 224 225
	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
	if (IS_ERR(hcd->usb_phy)) {
		ret = PTR_ERR(hcd->usb_phy);
		if (ret == -EPROBE_DEFER)
			goto put_usb3_hcd;
		hcd->usb_phy = NULL;
	} else {
		ret = usb_phy_init(hcd->usb_phy);
		if (ret)
			goto put_usb3_hcd;
	}

226
	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
227
	if (ret)
228
		goto disable_usb_phy;
229

230 231 232 233
	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
	if (ret)
		goto dealloc_usb2_hcd;

234 235
	return 0;

236 237 238 239

dealloc_usb2_hcd:
	usb_remove_hcd(hcd);

240 241 242
disable_usb_phy:
	usb_phy_shutdown(hcd->usb_phy);

243 244 245
put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);

246 247 248 249
disable_clk:
	if (!IS_ERR(clk))
		clk_disable_unprepare(clk);

250 251 252 253 254 255 256 257 258 259
put_hcd:
	usb_put_hcd(hcd);

	return ret;
}

static int xhci_plat_remove(struct platform_device *dev)
{
	struct usb_hcd	*hcd = platform_get_drvdata(dev);
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
260
	struct clk *clk = xhci->clk;
261 262

	usb_remove_hcd(xhci->shared_hcd);
263
	usb_phy_shutdown(hcd->usb_phy);
264 265

	usb_remove_hcd(hcd);
266 267
	usb_put_hcd(xhci->shared_hcd);

268 269
	if (!IS_ERR(clk))
		clk_disable_unprepare(clk);
270 271 272 273 274
	usb_put_hcd(hcd);

	return 0;
}

275
#ifdef CONFIG_PM_SLEEP
276 277 278 279 280
static int xhci_plat_suspend(struct device *dev)
{
	struct usb_hcd	*hcd = dev_get_drvdata(dev);
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);

281 282 283 284 285 286 287 288 289
	/*
	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
	 * to do wakeup during suspend. Since xhci_plat_suspend is currently
	 * only designed for system suspend, device_may_wakeup() is enough
	 * to dertermine whether host is allowed to do wakeup. Need to
	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
	 * also applies to runtime suspend.
	 */
	return xhci_suspend(xhci, device_may_wakeup(dev));
290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307
}

static int xhci_plat_resume(struct device *dev)
{
	struct usb_hcd	*hcd = dev_get_drvdata(dev);
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);

	return xhci_resume(xhci, 0);
}

static const struct dev_pm_ops xhci_plat_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
};
#define DEV_PM_OPS	(&xhci_plat_pm_ops)
#else
#define DEV_PM_OPS	NULL
#endif /* CONFIG_PM */

308 309 310 311 312 313 314
static const struct acpi_device_id usb_xhci_acpi_match[] = {
	/* XHCI-compliant USB Controller */
	{ "PNP0D10", },
	{ }
};
MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);

315 316 317 318 319
static struct platform_driver usb_xhci_driver = {
	.probe	= xhci_plat_probe,
	.remove	= xhci_plat_remove,
	.driver	= {
		.name = "xhci-hcd",
320
		.pm = DEV_PM_OPS,
321
		.of_match_table = of_match_ptr(usb_xhci_of_match),
322
		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
323 324 325 326
	},
};
MODULE_ALIAS("platform:xhci-hcd");

327
static int __init xhci_plat_init(void)
328
{
329
	xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
330 331
	return platform_driver_register(&usb_xhci_driver);
}
332
module_init(xhci_plat_init);
333

334
static void __exit xhci_plat_exit(void)
335 336 337
{
	platform_driver_unregister(&usb_xhci_driver);
}
338 339 340 341
module_exit(xhci_plat_exit);

MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
MODULE_LICENSE("GPL");