bf5xx-tdm.c 8.1 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343
/*
 * File:         sound/soc/blackfin/bf5xx-tdm.c
 * Author:       Barry Song <Barry.Song@analog.com>
 *
 * Created:      Thurs June 04 2009
 * Description:  Blackfin I2S(TDM) CPU DAI driver
 *              Even though TDM mode can be as part of I2S DAI, but there
 *              are so much difference in configuration and data flow,
 *              it's very ugly to integrate I2S and TDM into a module
 *
 * Modified:
 *               Copyright 2009 Analog Devices Inc.
 *
 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see the file COPYING, or write
 * to the Free Software Foundation, Inc.,
 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>

#include <asm/irq.h>
#include <asm/portmux.h>
#include <linux/mutex.h>
#include <linux/gpio.h>

#include "bf5xx-sport.h"
#include "bf5xx-tdm.h"

struct bf5xx_tdm_port {
	u16 tcr1;
	u16 rcr1;
	u16 tcr2;
	u16 rcr2;
	int configured;
};

static struct bf5xx_tdm_port bf5xx_tdm;
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;

static struct sport_param sport_params[2] = {
	{
		.dma_rx_chan    = CH_SPORT0_RX,
		.dma_tx_chan    = CH_SPORT0_TX,
		.err_irq        = IRQ_SPORT0_ERROR,
		.regs           = (struct sport_register *)SPORT0_TCR1,
	},
	{
		.dma_rx_chan    = CH_SPORT1_RX,
		.dma_tx_chan    = CH_SPORT1_TX,
		.err_irq        = IRQ_SPORT1_ERROR,
		.regs           = (struct sport_register *)SPORT1_TCR1,
	}
};

/*
 * Setting the TFS pin selector for SPORT 0 based on whether the selected
 * port id F or G. If the port is F then no conflict should exist for the
 * TFS. When Port G is selected and EMAC then there is a conflict between
 * the PHY interrupt line and TFS.  Current settings prevent the conflict
 * by ignoring the TFS pin when Port G is selected. This allows both
 * ssm2602 using Port G and EMAC concurrently.
 */
#ifdef CONFIG_BF527_SPORT0_PORTF
#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
#else
#define LOCAL_SPORT0_TFS (0)
#endif

static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
	P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
	   {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
		   P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };

static int bf5xx_tdm_set_dai_fmt(struct snd_soc_dai *cpu_dai,
	unsigned int fmt)
{
	int ret = 0;

	/* interface format:support TDM,slave mode */
	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_DSP_A:
		break;
	default:
		printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
		ret = -EINVAL;
		break;
	}

	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
	case SND_SOC_DAIFMT_CBM_CFM:
		break;
	case SND_SOC_DAIFMT_CBS_CFS:
	case SND_SOC_DAIFMT_CBM_CFS:
	case SND_SOC_DAIFMT_CBS_CFM:
		ret = -EINVAL;
		break;
	default:
		printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
		ret = -EINVAL;
		break;
	}

	return ret;
}

static int bf5xx_tdm_hw_params(struct snd_pcm_substream *substream,
	struct snd_pcm_hw_params *params,
	struct snd_soc_dai *dai)
{
	int ret = 0;

	bf5xx_tdm.tcr2 &= ~0x1f;
	bf5xx_tdm.rcr2 &= ~0x1f;
	switch (params_format(params)) {
	case SNDRV_PCM_FORMAT_S32_LE:
		bf5xx_tdm.tcr2 |= 31;
		bf5xx_tdm.rcr2 |= 31;
		sport_handle->wdsize = 4;
		break;
		/* at present, we only support 32bit transfer */
	default:
		pr_err("not supported PCM format yet\n");
		return -EINVAL;
		break;
	}

	if (!bf5xx_tdm.configured) {
		/*
		 * TX and RX are not independent,they are enabled at the
		 * same time, even if only one side is running. So, we
		 * need to configure both of them at the time when the first
		 * stream is opened.
		 *
		 * CPU DAI:slave mode.
		 */
		ret = sport_config_rx(sport_handle, bf5xx_tdm.rcr1,
			bf5xx_tdm.rcr2, 0, 0);
		if (ret) {
			pr_err("SPORT is busy!\n");
			return -EBUSY;
		}

		ret = sport_config_tx(sport_handle, bf5xx_tdm.tcr1,
			bf5xx_tdm.tcr2, 0, 0);
		if (ret) {
			pr_err("SPORT is busy!\n");
			return -EBUSY;
		}

		bf5xx_tdm.configured = 1;
	}

	return 0;
}

static void bf5xx_tdm_shutdown(struct snd_pcm_substream *substream,
	struct snd_soc_dai *dai)
{
	/* No active stream, SPORT is allowed to be configured again. */
	if (!dai->active)
		bf5xx_tdm.configured = 0;
}

#ifdef CONFIG_PM
static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
{
	struct sport_device *sport =
		(struct sport_device *)dai->private_data;

	if (!dai->active)
		return 0;
	if (dai->capture.active)
		sport_rx_stop(sport);
	if (dai->playback.active)
		sport_tx_stop(sport);
	return 0;
}

static int bf5xx_tdm_resume(struct snd_soc_dai *dai)
{
	int ret;
	struct sport_device *sport =
		(struct sport_device *)dai->private_data;

	if (!dai->active)
		return 0;

	ret = sport_set_multichannel(sport, 8, 0xFF, 1);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
	}

	ret = sport_config_rx(sport, IRFS, 0x1F, 0, 0);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
	}

	ret = sport_config_tx(sport, ITFS, 0x1F, 0, 0);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
	}

	return 0;
}

#else
#define bf5xx_tdm_suspend      NULL
#define bf5xx_tdm_resume       NULL
#endif

static struct snd_soc_dai_ops bf5xx_tdm_dai_ops = {
	.hw_params      = bf5xx_tdm_hw_params,
	.set_fmt        = bf5xx_tdm_set_dai_fmt,
	.shutdown       = bf5xx_tdm_shutdown,
};

struct snd_soc_dai bf5xx_tdm_dai = {
	.name = "bf5xx-tdm",
	.id = 0,
	.suspend = bf5xx_tdm_suspend,
	.resume = bf5xx_tdm_resume,
	.playback = {
		.channels_min = 2,
		.channels_max = 8,
		.rates = SNDRV_PCM_RATE_48000,
		.formats = SNDRV_PCM_FMTBIT_S32_LE,},
	.capture = {
		.channels_min = 2,
		.channels_max = 8,
		.rates = SNDRV_PCM_RATE_48000,
		.formats = SNDRV_PCM_FMTBIT_S32_LE,},
	.ops = &bf5xx_tdm_dai_ops,
};
EXPORT_SYMBOL_GPL(bf5xx_tdm_dai);

static int __devinit bfin_tdm_probe(struct platform_device *pdev)
{
	int ret = 0;

	if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
		pr_err("Requesting Peripherals failed\n");
		return -EFAULT;
	}

	/* request DMA for SPORT */
	sport_handle = sport_init(&sport_params[sport_num], 4, \
		8 * sizeof(u32), NULL);
	if (!sport_handle) {
		peripheral_free_list(&sport_req[sport_num][0]);
		return -ENODEV;
	}

	/* SPORT works in TDM mode */
	ret = sport_set_multichannel(sport_handle, 8, 0xFF, 1);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
		goto sport_config_err;
	}

	ret = sport_config_rx(sport_handle, IRFS, 0x1F, 0, 0);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
		goto sport_config_err;
	}

	ret = sport_config_tx(sport_handle, ITFS, 0x1F, 0, 0);
	if (ret) {
		pr_err("SPORT is busy!\n");
		ret = -EBUSY;
		goto sport_config_err;
	}

	ret = snd_soc_register_dai(&bf5xx_tdm_dai);
	if (ret) {
		pr_err("Failed to register DAI: %d\n", ret);
		goto sport_config_err;
	}
	return 0;

sport_config_err:
	peripheral_free_list(&sport_req[sport_num][0]);
	return ret;
}

static int __devexit bfin_tdm_remove(struct platform_device *pdev)
{
	peripheral_free_list(&sport_req[sport_num][0]);
	snd_soc_unregister_dai(&bf5xx_tdm_dai);

	return 0;
}

static struct platform_driver bfin_tdm_driver = {
	.probe  = bfin_tdm_probe,
	.remove = __devexit_p(bfin_tdm_remove),
	.driver = {
		.name   = "bfin-tdm",
		.owner  = THIS_MODULE,
	},
};

static int __init bfin_tdm_init(void)
{
	return platform_driver_register(&bfin_tdm_driver);
}
module_init(bfin_tdm_init);

static void __exit bfin_tdm_exit(void)
{
	platform_driver_unregister(&bfin_tdm_driver);
}
module_exit(bfin_tdm_exit);

/* Module information */
MODULE_AUTHOR("Barry Song");
MODULE_DESCRIPTION("TDM driver for ADI Blackfin");
MODULE_LICENSE("GPL");