ks8842.c 32.7 KB
Newer Older
R
Richard Röjfors 已提交
1
/*
2
 * ks8842.c timberdale KS8842 ethernet driver
R
Richard Röjfors 已提交
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
 * Copyright (c) 2009 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/* Supports:
 * The Micrel KS8842 behind the timberdale FPGA
21
 * The genuine Micrel KS8841/42 device with ISA 16/32bit bus interface
R
Richard Röjfors 已提交
22 23
 */

24 25
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

26
#include <linux/interrupt.h>
R
Richard Röjfors 已提交
27 28 29 30 31 32
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
33
#include <linux/ks8842.h>
34 35 36
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
R
Richard Röjfors 已提交
37 38 39 40

#define DRV_NAME "ks8842"

/* Timberdale specific Registers */
41 42 43 44 45 46
#define REG_TIMB_RST		0x1c
#define REG_TIMB_FIFO		0x20
#define REG_TIMB_ISR		0x24
#define REG_TIMB_IER		0x28
#define REG_TIMB_IAR		0x2C
#define REQ_TIMB_DMA_RESUME	0x30
R
Richard Röjfors 已提交
47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

/* KS8842 registers */

#define REG_SELECT_BANK 0x0e

/* bank 0 registers */
#define REG_QRFCR	0x04

/* bank 2 registers */
#define REG_MARL	0x00
#define REG_MARM	0x02
#define REG_MARH	0x04

/* bank 3 registers */
#define REG_GRR		0x06

/* bank 16 registers */
#define REG_TXCR	0x00
#define REG_TXSR	0x02
#define REG_RXCR	0x04
#define REG_TXMIR	0x08
#define REG_RXMIR	0x0A

/* bank 17 registers */
#define REG_TXQCR	0x00
#define REG_RXQCR	0x02
#define REG_TXFDPR	0x04
#define REG_RXFDPR	0x06
#define REG_QMU_DATA_LO 0x08
#define REG_QMU_DATA_HI 0x0A

/* bank 18 registers */
#define REG_IER		0x00
#define IRQ_LINK_CHANGE	0x8000
#define IRQ_TX		0x4000
#define IRQ_RX		0x2000
#define IRQ_RX_OVERRUN	0x0800
#define IRQ_TX_STOPPED	0x0200
#define IRQ_RX_STOPPED	0x0100
#define IRQ_RX_ERROR	0x0080
#define ENABLED_IRQS	(IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
		IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
89 90 91 92 93 94 95 96 97
/* When running via timberdale in DMA mode, the RX interrupt should be
   enabled in the KS8842, but not in the FPGA IP, since the IP handles
   RX DMA internally.
   TX interrupts are not needed it is handled by the FPGA the driver is
   notified via DMA callbacks.
*/
#define ENABLED_IRQS_DMA_IP	(IRQ_LINK_CHANGE | IRQ_RX_STOPPED | \
	IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
#define ENABLED_IRQS_DMA	(ENABLED_IRQS_DMA_IP | IRQ_RX)
R
Richard Röjfors 已提交
98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135
#define REG_ISR		0x02
#define REG_RXSR	0x04
#define RXSR_VALID	0x8000
#define RXSR_BROADCAST	0x80
#define RXSR_MULTICAST	0x40
#define RXSR_UNICAST	0x20
#define RXSR_FRAMETYPE	0x08
#define RXSR_TOO_LONG	0x04
#define RXSR_RUNT	0x02
#define RXSR_CRC_ERROR	0x01
#define RXSR_ERROR	(RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)

/* bank 32 registers */
#define REG_SW_ID_AND_ENABLE	0x00
#define REG_SGCR1		0x02
#define REG_SGCR2		0x04
#define REG_SGCR3		0x06

/* bank 39 registers */
#define REG_MACAR1		0x00
#define REG_MACAR2		0x02
#define REG_MACAR3		0x04

/* bank 45 registers */
#define REG_P1MBCR		0x00
#define REG_P1MBSR		0x02

/* bank 46 registers */
#define REG_P2MBCR		0x00
#define REG_P2MBSR		0x02

/* bank 48 registers */
#define REG_P1CR2		0x02

/* bank 49 registers */
#define REG_P1CR4		0x02
#define REG_P1SR		0x04

136 137 138 139
/* flags passed by platform_device for configuration */
#define	MICREL_KS884X		0x01	/* 0=Timeberdale(FPGA), 1=Micrel */
#define	KS884X_16BIT		0x02	/*  1=16bit, 0=32bit */

140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161
#define DMA_BUFFER_SIZE		2048

struct ks8842_tx_dma_ctl {
	struct dma_chan *chan;
	struct dma_async_tx_descriptor *adesc;
	void *buf;
	struct scatterlist sg;
	int channel;
};

struct ks8842_rx_dma_ctl {
	struct dma_chan *chan;
	struct dma_async_tx_descriptor *adesc;
	struct sk_buff  *skb;
	struct scatterlist sg;
	struct tasklet_struct tasklet;
	int channel;
};

#define KS8842_USE_DMA(adapter) (((adapter)->dma_tx.channel != -1) && \
	 ((adapter)->dma_rx.channel != -1))

R
Richard Röjfors 已提交
162 163 164
struct ks8842_adapter {
	void __iomem	*hw_addr;
	int		irq;
165
	unsigned long	conf_flags;	/* copy of platform_device config */
R
Richard Röjfors 已提交
166 167
	struct tasklet_struct	tasklet;
	spinlock_t	lock; /* spinlock to be interrupt safe */
168 169
	struct work_struct timeout_work;
	struct net_device *netdev;
170 171 172
	struct device *dev;
	struct ks8842_tx_dma_ctl	dma_tx;
	struct ks8842_rx_dma_ctl	dma_rx;
R
Richard Röjfors 已提交
173 174
};

175 176 177 178 179 180 181 182
static void ks8842_dma_rx_cb(void *data);
static void ks8842_dma_tx_cb(void *data);

static inline void ks8842_resume_dma(struct ks8842_adapter *adapter)
{
	iowrite32(1, adapter->hw_addr + REQ_TIMB_DMA_RESUME);
}

R
Richard Röjfors 已提交
183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251
static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
{
	iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
}

static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank,
	u8 value, int offset)
{
	ks8842_select_bank(adapter, bank);
	iowrite8(value, adapter->hw_addr + offset);
}

static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank,
	u16 value, int offset)
{
	ks8842_select_bank(adapter, bank);
	iowrite16(value, adapter->hw_addr + offset);
}

static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank,
	u16 bits, int offset)
{
	u16 reg;
	ks8842_select_bank(adapter, bank);
	reg = ioread16(adapter->hw_addr + offset);
	reg |= bits;
	iowrite16(reg, adapter->hw_addr + offset);
}

static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank,
	u16 bits, int offset)
{
	u16 reg;
	ks8842_select_bank(adapter, bank);
	reg = ioread16(adapter->hw_addr + offset);
	reg &= ~bits;
	iowrite16(reg, adapter->hw_addr + offset);
}

static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank,
	u32 value, int offset)
{
	ks8842_select_bank(adapter, bank);
	iowrite32(value, adapter->hw_addr + offset);
}

static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank,
	int offset)
{
	ks8842_select_bank(adapter, bank);
	return ioread8(adapter->hw_addr + offset);
}

static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank,
	int offset)
{
	ks8842_select_bank(adapter, bank);
	return ioread16(adapter->hw_addr + offset);
}

static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
	int offset)
{
	ks8842_select_bank(adapter, bank);
	return ioread32(adapter->hw_addr + offset);
}

static void ks8842_reset(struct ks8842_adapter *adapter)
{
252 253 254 255 256 257 258 259 260 261 262 263 264 265 266
	if (adapter->conf_flags & MICREL_KS884X) {
		ks8842_write16(adapter, 3, 1, REG_GRR);
		msleep(10);
		iowrite16(0, adapter->hw_addr + REG_GRR);
	} else {
		/* The KS8842 goes haywire when doing softare reset
		* a work around in the timberdale IP is implemented to
		* do a hardware reset instead
		ks8842_write16(adapter, 3, 1, REG_GRR);
		msleep(10);
		iowrite16(0, adapter->hw_addr + REG_GRR);
		*/
		iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
		msleep(20);
	}
R
Richard Röjfors 已提交
267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323
}

static void ks8842_update_link_status(struct net_device *netdev,
	struct ks8842_adapter *adapter)
{
	/* check the status of the link */
	if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) {
		netif_carrier_on(netdev);
		netif_wake_queue(netdev);
	} else {
		netif_stop_queue(netdev);
		netif_carrier_off(netdev);
	}
}

static void ks8842_enable_tx(struct ks8842_adapter *adapter)
{
	ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR);
}

static void ks8842_disable_tx(struct ks8842_adapter *adapter)
{
	ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR);
}

static void ks8842_enable_rx(struct ks8842_adapter *adapter)
{
	ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR);
}

static void ks8842_disable_rx(struct ks8842_adapter *adapter)
{
	ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR);
}

static void ks8842_reset_hw(struct ks8842_adapter *adapter)
{
	/* reset the HW */
	ks8842_reset(adapter);

	/* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
	ks8842_write16(adapter, 16, 0x000E, REG_TXCR);

	/* enable the receiver, uni + multi + broadcast + flow ctrl
		+ crc strip */
	ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
		REG_RXCR);

	/* TX frame pointer autoincrement */
	ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR);

	/* RX frame pointer autoincrement */
	ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR);

	/* RX 2 kb high watermark */
	ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);

L
Lucas De Marchi 已提交
324
	/* aggressive back off in half duplex */
R
Richard Röjfors 已提交
325 326 327 328 329 330 331 332 333 334
	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);

	/* enable no excessive collison drop */
	ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);

	/* Enable port 1 force flow control / back pressure / transmit / recv */
	ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2);

	/* restart port auto-negotiation */
	ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
335

R
Richard Röjfors 已提交
336 337 338 339 340 341 342 343 344 345
	/* Enable the transmitter */
	ks8842_enable_tx(adapter);

	/* Enable the receiver */
	ks8842_enable_rx(adapter);

	/* clear all interrupts */
	ks8842_write16(adapter, 18, 0xffff, REG_ISR);

	/* enable interrupts */
346 347 348 349 350 351 352 353 354 355 356 357 358
	if (KS8842_USE_DMA(adapter)) {
		/* When running in DMA Mode the RX interrupt is not enabled in
		   timberdale because RX data is received by DMA callbacks
		   it must still be enabled in the KS8842 because it indicates
		   to timberdale when there is RX data for it's DMA FIFOs */
		iowrite16(ENABLED_IRQS_DMA_IP, adapter->hw_addr + REG_TIMB_IER);
		ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
	} else {
		if (!(adapter->conf_flags & MICREL_KS884X))
			iowrite16(ENABLED_IRQS,
				adapter->hw_addr + REG_TIMB_IER);
		ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
	}
R
Richard Röjfors 已提交
359 360 361 362 363 364 365 366 367 368 369 370
	/* enable the switch */
	ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
}

static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
{
	int i;
	u16 mac;

	for (i = 0; i < ETH_ALEN; i++)
		dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);

371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392
	if (adapter->conf_flags & MICREL_KS884X) {
		/*
		the sequence of saving mac addr between MAC and Switch is
		different.
		*/

		mac = ks8842_read16(adapter, 2, REG_MARL);
		ks8842_write16(adapter, 39, mac, REG_MACAR3);
		mac = ks8842_read16(adapter, 2, REG_MARM);
		ks8842_write16(adapter, 39, mac, REG_MACAR2);
		mac = ks8842_read16(adapter, 2, REG_MARH);
		ks8842_write16(adapter, 39, mac, REG_MACAR1);
	} else {

		/* make sure the switch port uses the same MAC as the QMU */
		mac = ks8842_read16(adapter, 2, REG_MARL);
		ks8842_write16(adapter, 39, mac, REG_MACAR1);
		mac = ks8842_read16(adapter, 2, REG_MARM);
		ks8842_write16(adapter, 39, mac, REG_MACAR2);
		mac = ks8842_read16(adapter, 2, REG_MARH);
		ks8842_write16(adapter, 39, mac, REG_MACAR3);
	}
R
Richard Röjfors 已提交
393 394
}

395 396 397 398 399 400 401 402
static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
{
	unsigned long flags;
	unsigned i;

	spin_lock_irqsave(&adapter->lock, flags);
	for (i = 0; i < ETH_ALEN; i++) {
		ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421
		if (!(adapter->conf_flags & MICREL_KS884X))
			ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
				REG_MACAR1 + i);
	}

	if (adapter->conf_flags & MICREL_KS884X) {
		/*
		the sequence of saving mac addr between MAC and Switch is
		different.
		*/

		u16 mac;

		mac = ks8842_read16(adapter, 2, REG_MARL);
		ks8842_write16(adapter, 39, mac, REG_MACAR3);
		mac = ks8842_read16(adapter, 2, REG_MARM);
		ks8842_write16(adapter, 39, mac, REG_MACAR2);
		mac = ks8842_read16(adapter, 2, REG_MARH);
		ks8842_write16(adapter, 39, mac, REG_MACAR1);
422 423 424 425
	}
	spin_unlock_irqrestore(&adapter->lock, flags);
}

R
Richard Röjfors 已提交
426 427 428 429 430
static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
{
	return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
}

431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477
static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct ks8842_tx_dma_ctl *ctl = &adapter->dma_tx;
	u8 *buf = ctl->buf;

	if (ctl->adesc) {
		netdev_dbg(netdev, "%s: TX ongoing\n", __func__);
		/* transfer ongoing */
		return NETDEV_TX_BUSY;
	}

	sg_dma_len(&ctl->sg) = skb->len + sizeof(u32);

	/* copy data to the TX buffer */
	/* the control word, enable IRQ, port 1 and the length */
	*buf++ = 0x00;
	*buf++ = 0x01; /* Port 1 */
	*buf++ = skb->len & 0xff;
	*buf++ = (skb->len >> 8) & 0xff;
	skb_copy_from_linear_data(skb, buf, skb->len);

	dma_sync_single_range_for_device(adapter->dev,
		sg_dma_address(&ctl->sg), 0, sg_dma_len(&ctl->sg),
		DMA_TO_DEVICE);

	/* make sure the length is a multiple of 4 */
	if (sg_dma_len(&ctl->sg) % 4)
		sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4;

	ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
		&ctl->sg, 1, DMA_TO_DEVICE,
		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
	if (!ctl->adesc)
		return NETDEV_TX_BUSY;

	ctl->adesc->callback_param = netdev;
	ctl->adesc->callback = ks8842_dma_tx_cb;
	ctl->adesc->tx_submit(ctl->adesc);

	netdev->stats.tx_bytes += skb->len;

	dev_kfree_skb(skb);

	return NETDEV_TX_OK;
}

R
Richard Röjfors 已提交
478 479 480 481 482
static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	int len = skb->len;

483
	netdev_dbg(netdev, "%s: len %u head %p data %p tail %p end %p\n",
R
Richard Röjfors 已提交
484 485 486 487 488 489 490
		__func__, skb->len, skb->head, skb->data,
		skb_tail_pointer(skb), skb_end_pointer(skb));

	/* check FIFO buffer space, we need space for CRC and command bits */
	if (ks8842_tx_fifo_space(adapter) < len + 8)
		return NETDEV_TX_BUSY;

491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509
	if (adapter->conf_flags & KS884X_16BIT) {
		u16 *ptr16 = (u16 *)skb->data;
		ks8842_write16(adapter, 17, 0x8000 | 0x100, REG_QMU_DATA_LO);
		ks8842_write16(adapter, 17, (u16)len, REG_QMU_DATA_HI);
		netdev->stats.tx_bytes += len;

		/* copy buffer */
		while (len > 0) {
			iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_LO);
			iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_HI);
			len -= sizeof(u32);
		}
	} else {

		u32 *ptr = (u32 *)skb->data;
		u32 ctrl;
		/* the control word, enable IRQ, port 1 and the length */
		ctrl = 0x8000 | 0x100 | (len << 16);
		ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
R
Richard Röjfors 已提交
510

511
		netdev->stats.tx_bytes += len;
R
Richard Röjfors 已提交
512

513 514 515 516 517 518
		/* copy buffer */
		while (len > 0) {
			iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
			len -= sizeof(u32);
			ptr++;
		}
R
Richard Röjfors 已提交
519 520 521 522 523 524 525 526 527 528
	}

	/* enqueue packet */
	ks8842_write16(adapter, 17, 1, REG_TXQCR);

	dev_kfree_skb(skb);

	return NETDEV_TX_OK;
}

529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643
static void ks8842_update_rx_err_counters(struct net_device *netdev, u32 status)
{
	netdev_dbg(netdev, "RX error, status: %x\n", status);

	netdev->stats.rx_errors++;
	if (status & RXSR_TOO_LONG)
		netdev->stats.rx_length_errors++;
	if (status & RXSR_CRC_ERROR)
		netdev->stats.rx_crc_errors++;
	if (status & RXSR_RUNT)
		netdev->stats.rx_frame_errors++;
}

static void ks8842_update_rx_counters(struct net_device *netdev, u32 status,
	int len)
{
	netdev_dbg(netdev, "RX packet, len: %d\n", len);

	netdev->stats.rx_packets++;
	netdev->stats.rx_bytes += len;
	if (status & RXSR_MULTICAST)
		netdev->stats.multicast++;
}

static int __ks8842_start_new_rx_dma(struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
	struct scatterlist *sg = &ctl->sg;
	int err;

	ctl->skb = netdev_alloc_skb(netdev, DMA_BUFFER_SIZE);
	if (ctl->skb) {
		sg_init_table(sg, 1);
		sg_dma_address(sg) = dma_map_single(adapter->dev,
			ctl->skb->data, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
		err = dma_mapping_error(adapter->dev, sg_dma_address(sg));
		if (unlikely(err)) {
			sg_dma_address(sg) = 0;
			goto out;
		}

		sg_dma_len(sg) = DMA_BUFFER_SIZE;

		ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
			sg, 1, DMA_FROM_DEVICE,
			DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);

		if (!ctl->adesc)
			goto out;

		ctl->adesc->callback_param = netdev;
		ctl->adesc->callback = ks8842_dma_rx_cb;
		ctl->adesc->tx_submit(ctl->adesc);
	} else {
		err = -ENOMEM;
		sg_dma_address(sg) = 0;
		goto out;
	}

	return err;
out:
	if (sg_dma_address(sg))
		dma_unmap_single(adapter->dev, sg_dma_address(sg),
			DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
	sg_dma_address(sg) = 0;
	if (ctl->skb)
		dev_kfree_skb(ctl->skb);

	ctl->skb = NULL;

	printk(KERN_ERR DRV_NAME": Failed to start RX DMA: %d\n", err);
	return err;
}

static void ks8842_rx_frame_dma_tasklet(unsigned long arg)
{
	struct net_device *netdev = (struct net_device *)arg;
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct ks8842_rx_dma_ctl *ctl = &adapter->dma_rx;
	struct sk_buff *skb = ctl->skb;
	dma_addr_t addr = sg_dma_address(&ctl->sg);
	u32 status;

	ctl->adesc = NULL;

	/* kick next transfer going */
	__ks8842_start_new_rx_dma(netdev);

	/* now handle the data we got */
	dma_unmap_single(adapter->dev, addr, DMA_BUFFER_SIZE, DMA_FROM_DEVICE);

	status = *((u32 *)skb->data);

	netdev_dbg(netdev, "%s - rx_data: status: %x\n",
		__func__, status & 0xffff);

	/* check the status */
	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
		int len = (status >> 16) & 0x7ff;

		ks8842_update_rx_counters(netdev, status, len);

		/* reserve 4 bytes which is the status word */
		skb_reserve(skb, 4);
		skb_put(skb, len);

		skb->protocol = eth_type_trans(skb, netdev);
		netif_rx(skb);
	} else {
		ks8842_update_rx_err_counters(netdev, status);
		dev_kfree_skb(skb);
	}
}

R
Richard Röjfors 已提交
644 645 646
static void ks8842_rx_frame(struct net_device *netdev,
	struct ks8842_adapter *adapter)
{
647 648
	u32 status;
	int len;
R
Richard Röjfors 已提交
649

650
	if (adapter->conf_flags & KS884X_16BIT) {
651 652
		status = ks8842_read16(adapter, 17, REG_QMU_DATA_LO);
		len = ks8842_read16(adapter, 17, REG_QMU_DATA_HI);
653
		netdev_dbg(netdev, "%s - rx_data: status: %x\n",
654
			   __func__, status);
655 656 657 658 659 660 661
	} else {
		status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
		len = (status >> 16) & 0x7ff;
		status &= 0xffff;
		netdev_dbg(netdev, "%s - rx_data: status: %x\n",
			   __func__, status);
	}
R
Richard Röjfors 已提交
662 663 664

	/* check the status */
	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
665
		struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len + 3);
R
Richard Röjfors 已提交
666 667 668

		if (skb) {

669
			ks8842_update_rx_counters(netdev, status, len);
R
Richard Röjfors 已提交
670

671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689
			if (adapter->conf_flags & KS884X_16BIT) {
				u16 *data16 = (u16 *)skb_put(skb, len);
				ks8842_select_bank(adapter, 17);
				while (len > 0) {
					*data16++ = ioread16(adapter->hw_addr +
						REG_QMU_DATA_LO);
					*data16++ = ioread16(adapter->hw_addr +
						REG_QMU_DATA_HI);
					len -= sizeof(u32);
				}
			} else {
				u32 *data = (u32 *)skb_put(skb, len);

				ks8842_select_bank(adapter, 17);
				while (len > 0) {
					*data++ = ioread32(adapter->hw_addr +
						REG_QMU_DATA_LO);
					len -= sizeof(u32);
				}
R
Richard Röjfors 已提交
690 691 692 693 694
			}
			skb->protocol = eth_type_trans(skb, netdev);
			netif_rx(skb);
		} else
			netdev->stats.rx_dropped++;
695 696
	} else
		ks8842_update_rx_err_counters(netdev, status);
R
Richard Röjfors 已提交
697 698 699 700 701 702 703 704 705 706 707 708 709 710

	/* set high watermark to 3K */
	ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);

	/* release the frame */
	ks8842_write16(adapter, 17, 0x01, REG_RXQCR);

	/* set high watermark to 2K */
	ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR);
}

void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter)
{
	u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
711
	netdev_dbg(netdev, "%s Entry - rx_data: %d\n", __func__, rx_data);
R
Richard Röjfors 已提交
712 713 714 715 716 717 718 719 720
	while (rx_data) {
		ks8842_rx_frame(netdev, adapter);
		rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
	}
}

void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter)
{
	u16 sr = ks8842_read16(adapter, 16, REG_TXSR);
721
	netdev_dbg(netdev, "%s - entry, sr: %x\n", __func__, sr);
R
Richard Röjfors 已提交
722 723 724 725 726 727 728 729
	netdev->stats.tx_packets++;
	if (netif_queue_stopped(netdev))
		netif_wake_queue(netdev);
}

void ks8842_handle_rx_overrun(struct net_device *netdev,
	struct ks8842_adapter *adapter)
{
730
	netdev_dbg(netdev, "%s: entry\n", __func__);
R
Richard Röjfors 已提交
731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748
	netdev->stats.rx_errors++;
	netdev->stats.rx_fifo_errors++;
}

void ks8842_tasklet(unsigned long arg)
{
	struct net_device *netdev = (struct net_device *)arg;
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	u16 isr;
	unsigned long flags;
	u16 entry_bank;

	/* read current bank to be able to set it back */
	spin_lock_irqsave(&adapter->lock, flags);
	entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
	spin_unlock_irqrestore(&adapter->lock, flags);

	isr = ks8842_read16(adapter, 18, REG_ISR);
749
	netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
R
Richard Röjfors 已提交
750

751 752 753 754 755 756
	/* when running in DMA mode, do not ack RX interrupts, it is handled
	   internally by timberdale, otherwise it's DMA FIFO:s would stop
	*/
	if (KS8842_USE_DMA(adapter))
		isr &= ~IRQ_RX;

R
Richard Röjfors 已提交
757 758 759
	/* Ack */
	ks8842_write16(adapter, 18, isr, REG_ISR);

760 761 762 763
	if (!(adapter->conf_flags & MICREL_KS884X))
		/* Ack in the timberdale IP as well */
		iowrite32(0x1, adapter->hw_addr + REG_TIMB_IAR);

R
Richard Röjfors 已提交
764 765 766 767 768 769
	if (!netif_running(netdev))
		return;

	if (isr & IRQ_LINK_CHANGE)
		ks8842_update_link_status(netdev, adapter);

770 771
	/* should not get IRQ_RX when running DMA mode */
	if (isr & (IRQ_RX | IRQ_RX_ERROR) && !KS8842_USE_DMA(adapter))
R
Richard Röjfors 已提交
772 773
		ks8842_handle_rx(netdev, adapter);

774
	/* should only happen when in PIO mode */
R
Richard Röjfors 已提交
775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792
	if (isr & IRQ_TX)
		ks8842_handle_tx(netdev, adapter);

	if (isr & IRQ_RX_OVERRUN)
		ks8842_handle_rx_overrun(netdev, adapter);

	if (isr & IRQ_TX_STOPPED) {
		ks8842_disable_tx(adapter);
		ks8842_enable_tx(adapter);
	}

	if (isr & IRQ_RX_STOPPED) {
		ks8842_disable_rx(adapter);
		ks8842_enable_rx(adapter);
	}

	/* re-enable interrupts, put back the bank selection register */
	spin_lock_irqsave(&adapter->lock, flags);
793 794 795 796
	if (KS8842_USE_DMA(adapter))
		ks8842_write16(adapter, 18, ENABLED_IRQS_DMA, REG_IER);
	else
		ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
R
Richard Röjfors 已提交
797
	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
798 799 800 801 802 803

	/* Make sure timberdale continues DMA operations, they are stopped while
	   we are handling the ks8842 because we might change bank */
	if (KS8842_USE_DMA(adapter))
		ks8842_resume_dma(adapter);

R
Richard Röjfors 已提交
804 805 806 807 808
	spin_unlock_irqrestore(&adapter->lock, flags);
}

static irqreturn_t ks8842_irq(int irq, void *devid)
{
809 810
	struct net_device *netdev = devid;
	struct ks8842_adapter *adapter = netdev_priv(netdev);
R
Richard Röjfors 已提交
811 812 813 814 815
	u16 isr;
	u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
	irqreturn_t ret = IRQ_NONE;

	isr = ks8842_read16(adapter, 18, REG_ISR);
816
	netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
R
Richard Röjfors 已提交
817 818

	if (isr) {
819 820 821 822 823 824
		if (KS8842_USE_DMA(adapter))
			/* disable all but RX IRQ, since the FPGA relies on it*/
			ks8842_write16(adapter, 18, IRQ_RX, REG_IER);
		else
			/* disable IRQ */
			ks8842_write16(adapter, 18, 0x00, REG_IER);
R
Richard Röjfors 已提交
825 826 827 828 829 830 831 832 833

		/* schedule tasklet */
		tasklet_schedule(&adapter->tasklet);

		ret = IRQ_HANDLED;
	}

	iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);

834 835 836 837 838
	/* After an interrupt, tell timberdale to continue DMA operations.
	   DMA is disabled while we are handling the ks8842 because we might
	   change bank */
	ks8842_resume_dma(adapter);

R
Richard Röjfors 已提交
839 840 841
	return ret;
}

842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922
static void ks8842_dma_rx_cb(void *data)
{
	struct net_device	*netdev = data;
	struct ks8842_adapter	*adapter = netdev_priv(netdev);

	netdev_dbg(netdev, "RX DMA finished\n");
	/* schedule tasklet */
	if (adapter->dma_rx.adesc)
		tasklet_schedule(&adapter->dma_rx.tasklet);
}

static void ks8842_dma_tx_cb(void *data)
{
	struct net_device		*netdev = data;
	struct ks8842_adapter		*adapter = netdev_priv(netdev);
	struct ks8842_tx_dma_ctl	*ctl = &adapter->dma_tx;

	netdev_dbg(netdev, "TX DMA finished\n");

	if (!ctl->adesc)
		return;

	netdev->stats.tx_packets++;
	ctl->adesc = NULL;

	if (netif_queue_stopped(netdev))
		netif_wake_queue(netdev);
}

static void ks8842_stop_dma(struct ks8842_adapter *adapter)
{
	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;

	tx_ctl->adesc = NULL;
	if (tx_ctl->chan)
		tx_ctl->chan->device->device_control(tx_ctl->chan,
			DMA_TERMINATE_ALL, 0);

	rx_ctl->adesc = NULL;
	if (rx_ctl->chan)
		rx_ctl->chan->device->device_control(rx_ctl->chan,
			DMA_TERMINATE_ALL, 0);

	if (sg_dma_address(&rx_ctl->sg))
		dma_unmap_single(adapter->dev, sg_dma_address(&rx_ctl->sg),
			DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
	sg_dma_address(&rx_ctl->sg) = 0;

	dev_kfree_skb(rx_ctl->skb);
	rx_ctl->skb = NULL;
}

static void ks8842_dealloc_dma_bufs(struct ks8842_adapter *adapter)
{
	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;

	ks8842_stop_dma(adapter);

	if (tx_ctl->chan)
		dma_release_channel(tx_ctl->chan);
	tx_ctl->chan = NULL;

	if (rx_ctl->chan)
		dma_release_channel(rx_ctl->chan);
	rx_ctl->chan = NULL;

	tasklet_kill(&rx_ctl->tasklet);

	if (sg_dma_address(&tx_ctl->sg))
		dma_unmap_single(adapter->dev, sg_dma_address(&tx_ctl->sg),
			DMA_BUFFER_SIZE, DMA_TO_DEVICE);
	sg_dma_address(&tx_ctl->sg) = 0;

	kfree(tx_ctl->buf);
	tx_ctl->buf = NULL;
}

static bool ks8842_dma_filter_fn(struct dma_chan *chan, void *filter_param)
{
923
	return chan->chan_id == (long)filter_param;
924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941
}

static int ks8842_alloc_dma_bufs(struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct ks8842_tx_dma_ctl *tx_ctl = &adapter->dma_tx;
	struct ks8842_rx_dma_ctl *rx_ctl = &adapter->dma_rx;
	int err;

	dma_cap_mask_t mask;

	dma_cap_zero(mask);
	dma_cap_set(DMA_SLAVE, mask);
	dma_cap_set(DMA_PRIVATE, mask);

	sg_init_table(&tx_ctl->sg, 1);

	tx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
942
					   (void *)(long)tx_ctl->channel);
943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964
	if (!tx_ctl->chan) {
		err = -ENODEV;
		goto err;
	}

	/* allocate DMA buffer */
	tx_ctl->buf = kmalloc(DMA_BUFFER_SIZE, GFP_KERNEL);
	if (!tx_ctl->buf) {
		err = -ENOMEM;
		goto err;
	}

	sg_dma_address(&tx_ctl->sg) = dma_map_single(adapter->dev,
		tx_ctl->buf, DMA_BUFFER_SIZE, DMA_TO_DEVICE);
	err = dma_mapping_error(adapter->dev,
		sg_dma_address(&tx_ctl->sg));
	if (err) {
		sg_dma_address(&tx_ctl->sg) = 0;
		goto err;
	}

	rx_ctl->chan = dma_request_channel(mask, ks8842_dma_filter_fn,
965
					   (void *)(long)rx_ctl->channel);
966 967 968 969 970 971 972 973 974 975 976 977 978
	if (!rx_ctl->chan) {
		err = -ENODEV;
		goto err;
	}

	tasklet_init(&rx_ctl->tasklet, ks8842_rx_frame_dma_tasklet,
		(unsigned long)netdev);

	return 0;
err:
	ks8842_dealloc_dma_bufs(adapter);
	return err;
}
R
Richard Röjfors 已提交
979 980 981 982 983 984 985 986

/* Netdevice operations */

static int ks8842_open(struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	int err;

987
	netdev_dbg(netdev, "%s - entry\n", __func__);
R
Richard Röjfors 已提交
988

989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007
	if (KS8842_USE_DMA(adapter)) {
		err = ks8842_alloc_dma_bufs(netdev);

		if (!err) {
			/* start RX dma */
			err = __ks8842_start_new_rx_dma(netdev);
			if (err)
				ks8842_dealloc_dma_bufs(adapter);
		}

		if (err) {
			printk(KERN_WARNING DRV_NAME
				": Failed to initiate DMA, running PIO\n");
			ks8842_dealloc_dma_bufs(adapter);
			adapter->dma_rx.channel = -1;
			adapter->dma_tx.channel = -1;
		}
	}

R
Richard Röjfors 已提交
1008 1009 1010
	/* reset the HW */
	ks8842_reset_hw(adapter);

1011 1012
	ks8842_write_mac_addr(adapter, netdev->dev_addr);

R
Richard Röjfors 已提交
1013 1014 1015
	ks8842_update_link_status(netdev, adapter);

	err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME,
1016
		netdev);
R
Richard Röjfors 已提交
1017
	if (err) {
1018
		pr_err("Failed to request IRQ: %d: %d\n", adapter->irq, err);
R
Richard Röjfors 已提交
1019 1020 1021 1022 1023 1024 1025 1026 1027 1028
		return err;
	}

	return 0;
}

static int ks8842_close(struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);

1029
	netdev_dbg(netdev, "%s - entry\n", __func__);
R
Richard Röjfors 已提交
1030

1031 1032
	cancel_work_sync(&adapter->timeout_work);

1033 1034 1035
	if (KS8842_USE_DMA(adapter))
		ks8842_dealloc_dma_bufs(adapter);

R
Richard Röjfors 已提交
1036
	/* free the irq */
1037
	free_irq(adapter->irq, netdev);
R
Richard Röjfors 已提交
1038 1039 1040 1041 1042 1043 1044

	/* disable the switch */
	ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE);

	return 0;
}

1045 1046
static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb,
				     struct net_device *netdev)
R
Richard Röjfors 已提交
1047 1048 1049 1050
{
	int ret;
	struct ks8842_adapter *adapter = netdev_priv(netdev);

1051
	netdev_dbg(netdev, "%s: entry\n", __func__);
R
Richard Röjfors 已提交
1052

1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063
	if (KS8842_USE_DMA(adapter)) {
		unsigned long flags;
		ret = ks8842_tx_frame_dma(skb, netdev);
		/* for now only allow one transfer at the time */
		spin_lock_irqsave(&adapter->lock, flags);
		if (adapter->dma_tx.adesc)
			netif_stop_queue(netdev);
		spin_unlock_irqrestore(&adapter->lock, flags);
		return ret;
	}

R
Richard Röjfors 已提交
1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077
	ret = ks8842_tx_frame(skb, netdev);

	if (ks8842_tx_fifo_space(adapter) <  netdev->mtu + 8)
		netif_stop_queue(netdev);

	return ret;
}

static int ks8842_set_mac(struct net_device *netdev, void *p)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct sockaddr *addr = p;
	char *mac = (u8 *)addr->sa_data;

1078
	netdev_dbg(netdev, "%s: entry\n", __func__);
R
Richard Röjfors 已提交
1079 1080 1081 1082 1083 1084

	if (!is_valid_ether_addr(addr->sa_data))
		return -EADDRNOTAVAIL;

	memcpy(netdev->dev_addr, mac, netdev->addr_len);

1085
	ks8842_write_mac_addr(adapter, mac);
R
Richard Röjfors 已提交
1086 1087 1088
	return 0;
}

1089
static void ks8842_tx_timeout_work(struct work_struct *work)
R
Richard Röjfors 已提交
1090
{
1091 1092 1093
	struct ks8842_adapter *adapter =
		container_of(work, struct ks8842_adapter, timeout_work);
	struct net_device *netdev = adapter->netdev;
R
Richard Röjfors 已提交
1094 1095
	unsigned long flags;

1096
	netdev_dbg(netdev, "%s: entry\n", __func__);
R
Richard Röjfors 已提交
1097 1098

	spin_lock_irqsave(&adapter->lock, flags);
1099 1100 1101 1102

	if (KS8842_USE_DMA(adapter))
		ks8842_stop_dma(adapter);

R
Richard Röjfors 已提交
1103 1104 1105
	/* disable interrupts */
	ks8842_write16(adapter, 18, 0, REG_IER);
	ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
1106 1107 1108

	netif_stop_queue(netdev);

R
Richard Röjfors 已提交
1109 1110 1111 1112
	spin_unlock_irqrestore(&adapter->lock, flags);

	ks8842_reset_hw(adapter);

1113 1114
	ks8842_write_mac_addr(adapter, netdev->dev_addr);

R
Richard Röjfors 已提交
1115
	ks8842_update_link_status(netdev, adapter);
1116 1117 1118

	if (KS8842_USE_DMA(adapter))
		__ks8842_start_new_rx_dma(netdev);
R
Richard Röjfors 已提交
1119 1120
}

1121 1122 1123 1124 1125 1126 1127 1128 1129
static void ks8842_tx_timeout(struct net_device *netdev)
{
	struct ks8842_adapter *adapter = netdev_priv(netdev);

	netdev_dbg(netdev, "%s: entry\n", __func__);

	schedule_work(&adapter->timeout_work);
}

R
Richard Röjfors 已提交
1130 1131 1132 1133 1134 1135 1136 1137 1138
static const struct net_device_ops ks8842_netdev_ops = {
	.ndo_open		= ks8842_open,
	.ndo_stop		= ks8842_close,
	.ndo_start_xmit		= ks8842_xmit_frame,
	.ndo_set_mac_address	= ks8842_set_mac,
	.ndo_tx_timeout 	= ks8842_tx_timeout,
	.ndo_validate_addr	= eth_validate_addr
};

1139
static const struct ethtool_ops ks8842_ethtool_ops = {
R
Richard Röjfors 已提交
1140 1141 1142 1143 1144 1145 1146 1147 1148
	.get_link		= ethtool_op_get_link,
};

static int __devinit ks8842_probe(struct platform_device *pdev)
{
	int err = -ENOMEM;
	struct resource *iomem;
	struct net_device *netdev;
	struct ks8842_adapter *adapter;
1149
	struct ks8842_platform_data *pdata = pdev->dev.platform_data;
R
Richard Röjfors 已提交
1150
	u16 id;
1151
	unsigned i;
R
Richard Röjfors 已提交
1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163

	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
		goto err_mem_region;

	netdev = alloc_etherdev(sizeof(struct ks8842_adapter));
	if (!netdev)
		goto err_alloc_etherdev;

	SET_NETDEV_DEV(netdev, &pdev->dev);

	adapter = netdev_priv(netdev);
1164 1165
	adapter->netdev = netdev;
	INIT_WORK(&adapter->timeout_work, ks8842_tx_timeout_work);
R
Richard Röjfors 已提交
1166
	adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
1167 1168
	adapter->conf_flags = iomem->flags;

R
Richard Röjfors 已提交
1169 1170 1171 1172 1173 1174 1175 1176 1177
	if (!adapter->hw_addr)
		goto err_ioremap;

	adapter->irq = platform_get_irq(pdev, 0);
	if (adapter->irq < 0) {
		err = adapter->irq;
		goto err_get_irq;
	}

1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190
	adapter->dev = (pdev->dev.parent) ? pdev->dev.parent : &pdev->dev;

	/* DMA is only supported when accessed via timberdale */
	if (!(adapter->conf_flags & MICREL_KS884X) && pdata &&
		(pdata->tx_dma_channel != -1) &&
		(pdata->rx_dma_channel != -1)) {
		adapter->dma_rx.channel = pdata->rx_dma_channel;
		adapter->dma_tx.channel = pdata->tx_dma_channel;
	} else {
		adapter->dma_rx.channel = -1;
		adapter->dma_tx.channel = -1;
	}

R
Richard Röjfors 已提交
1191 1192 1193 1194 1195 1196
	tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
	spin_lock_init(&adapter->lock);

	netdev->netdev_ops = &ks8842_netdev_ops;
	netdev->ethtool_ops = &ks8842_ethtool_ops;

1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215
	/* Check if a mac address was given */
	i = netdev->addr_len;
	if (pdata) {
		for (i = 0; i < netdev->addr_len; i++)
			if (pdata->macaddr[i] != 0)
				break;

		if (i < netdev->addr_len)
			/* an address was passed, use it */
			memcpy(netdev->dev_addr, pdata->macaddr,
				netdev->addr_len);
	}

	if (i == netdev->addr_len) {
		ks8842_read_mac_addr(adapter, netdev->dev_addr);

		if (!is_valid_ether_addr(netdev->dev_addr))
			random_ether_addr(netdev->dev_addr);
	}
R
Richard Röjfors 已提交
1216 1217 1218 1219 1220 1221 1222 1223 1224 1225

	id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE);

	strcpy(netdev->name, "eth%d");
	err = register_netdev(netdev);
	if (err)
		goto err_register;

	platform_set_drvdata(pdev, netdev);

1226
	pr_info("Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
R
Richard Röjfors 已提交
1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284
		(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);

	return 0;

err_register:
err_get_irq:
	iounmap(adapter->hw_addr);
err_ioremap:
	free_netdev(netdev);
err_alloc_etherdev:
	release_mem_region(iomem->start, resource_size(iomem));
err_mem_region:
	return err;
}

static int __devexit ks8842_remove(struct platform_device *pdev)
{
	struct net_device *netdev = platform_get_drvdata(pdev);
	struct ks8842_adapter *adapter = netdev_priv(netdev);
	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	unregister_netdev(netdev);
	tasklet_kill(&adapter->tasklet);
	iounmap(adapter->hw_addr);
	free_netdev(netdev);
	release_mem_region(iomem->start, resource_size(iomem));
	platform_set_drvdata(pdev, NULL);
	return 0;
}


static struct platform_driver ks8842_platform_driver = {
	.driver = {
		.name	= DRV_NAME,
		.owner	= THIS_MODULE,
	},
	.probe		= ks8842_probe,
	.remove		= ks8842_remove,
};

static int __init ks8842_init(void)
{
	return platform_driver_register(&ks8842_platform_driver);
}

static void __exit ks8842_exit(void)
{
	platform_driver_unregister(&ks8842_platform_driver);
}

module_init(ks8842_init);
module_exit(ks8842_exit);

MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ks8842");