pl061.c 8.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223
/*
 *  linux/drivers/gpio/pl061.c
 *
 *  Copyright (C) 2008, 2009 Provigent Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Driver for the ARM PrimeCell(tm) General Purpose Input/Output (PL061)
 *
 * Data sheet: ARM DDI 0190B, September 2000
 */
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>

#define GPIODIR 0x400
#define GPIOIS  0x404
#define GPIOIBE 0x408
#define GPIOIEV 0x40C
#define GPIOIE  0x410
#define GPIORIS 0x414
#define GPIOMIS 0x418
#define GPIOIC  0x41C

#define PL061_GPIO_NR	8

struct pl061_gpio {
	/* We use a list of pl061_gpio structs for each trigger IRQ in the main
	 * interrupts controller of the system. We need this to support systems
	 * in which more that one PL061s are connected to the same IRQ. The ISR
	 * interates through this list to find the source of the interrupt.
	 */
	struct list_head	list;

	/* Each of the two spinlocks protects a different set of hardware
	 * regiters and data structurs. This decouples the code of the IRQ from
	 * the GPIO code. This also makes the case of a GPIO routine call from
	 * the IRQ code simpler.
	 */
	spinlock_t		lock;		/* GPIO registers */
	spinlock_t		irq_lock;	/* IRQ registers */

	void __iomem		*base;
	unsigned		irq_base;
	struct gpio_chip	gc;
};

static int pl061_direction_input(struct gpio_chip *gc, unsigned offset)
{
	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
	unsigned long flags;
	unsigned char gpiodir;

	if (offset >= gc->ngpio)
		return -EINVAL;

	spin_lock_irqsave(&chip->lock, flags);
	gpiodir = readb(chip->base + GPIODIR);
	gpiodir &= ~(1 << offset);
	writeb(gpiodir, chip->base + GPIODIR);
	spin_unlock_irqrestore(&chip->lock, flags);

	return 0;
}

static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
		int value)
{
	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
	unsigned long flags;
	unsigned char gpiodir;

	if (offset >= gc->ngpio)
		return -EINVAL;

	spin_lock_irqsave(&chip->lock, flags);
	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
	gpiodir = readb(chip->base + GPIODIR);
	gpiodir |= 1 << offset;
	writeb(gpiodir, chip->base + GPIODIR);
	spin_unlock_irqrestore(&chip->lock, flags);

	return 0;
}

static int pl061_get_value(struct gpio_chip *gc, unsigned offset)
{
	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);

	return !!readb(chip->base + (1 << (offset + 2)));
}

static void pl061_set_value(struct gpio_chip *gc, unsigned offset, int value)
{
	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);

	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
}

/*
 * PL061 GPIO IRQ
 */
static void pl061_irq_disable(unsigned irq)
{
	struct pl061_gpio *chip = get_irq_chip_data(irq);
	int offset = irq - chip->irq_base;
	unsigned long flags;
	u8 gpioie;

	spin_lock_irqsave(&chip->irq_lock, flags);
	gpioie = readb(chip->base + GPIOIE);
	gpioie &= ~(1 << offset);
	writeb(gpioie, chip->base + GPIOIE);
	spin_unlock_irqrestore(&chip->irq_lock, flags);
}

static void pl061_irq_enable(unsigned irq)
{
	struct pl061_gpio *chip = get_irq_chip_data(irq);
	int offset = irq - chip->irq_base;
	unsigned long flags;
	u8 gpioie;

	spin_lock_irqsave(&chip->irq_lock, flags);
	gpioie = readb(chip->base + GPIOIE);
	gpioie |= 1 << offset;
	writeb(gpioie, chip->base + GPIOIE);
	spin_unlock_irqrestore(&chip->irq_lock, flags);
}

static int pl061_irq_type(unsigned irq, unsigned trigger)
{
	struct pl061_gpio *chip = get_irq_chip_data(irq);
	int offset = irq - chip->irq_base;
	unsigned long flags;
	u8 gpiois, gpioibe, gpioiev;

	if (offset < 0 || offset > PL061_GPIO_NR)
		return -EINVAL;

	spin_lock_irqsave(&chip->irq_lock, flags);

	gpioiev = readb(chip->base + GPIOIEV);

	gpiois = readb(chip->base + GPIOIS);
	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
		gpiois |= 1 << offset;
		if (trigger & IRQ_TYPE_LEVEL_HIGH)
			gpioiev |= 1 << offset;
		else
			gpioiev &= ~(1 << offset);
	} else
		gpiois &= ~(1 << offset);
	writeb(gpiois, chip->base + GPIOIS);

	gpioibe = readb(chip->base + GPIOIBE);
	if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
		gpioibe |= 1 << offset;
	else {
		gpioibe &= ~(1 << offset);
		if (trigger & IRQ_TYPE_EDGE_RISING)
			gpioiev |= 1 << offset;
		else
			gpioiev &= ~(1 << offset);
	}
	writeb(gpioibe, chip->base + GPIOIBE);

	writeb(gpioiev, chip->base + GPIOIEV);

	spin_unlock_irqrestore(&chip->irq_lock, flags);

	return 0;
}

static struct irq_chip pl061_irqchip = {
	.name		= "GPIO",
	.enable		= pl061_irq_enable,
	.disable	= pl061_irq_disable,
	.set_type	= pl061_irq_type,
};

static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
{
	struct list_head *chip_list = get_irq_chip_data(irq);
	struct list_head *ptr;
	struct pl061_gpio *chip;

	desc->chip->ack(irq);
	list_for_each(ptr, chip_list) {
		unsigned long pending;
		int gpio;

		chip = list_entry(ptr, struct pl061_gpio, list);
		pending = readb(chip->base + GPIOMIS);
		writeb(pending, chip->base + GPIOIC);

		if (pending == 0)
			continue;

		for_each_bit(gpio, &pending, PL061_GPIO_NR)
			generic_handle_irq(gpio_to_irq(gpio));
	}
	desc->chip->unmask(irq);
}

static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
{
	struct pl061_platform_data *pdata;
	struct pl061_gpio *chip;
	struct list_head *chip_list;
	int ret, irq, i;
224
	static DECLARE_BITMAP(init_irq, NR_IRQS);
225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282

	pdata = dev->dev.platform_data;
	if (pdata == NULL)
		return -ENODEV;

	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
	if (chip == NULL)
		return -ENOMEM;

	if (!request_mem_region(dev->res.start,
				resource_size(&dev->res), "pl061")) {
		ret = -EBUSY;
		goto free_mem;
	}

	chip->base = ioremap(dev->res.start, resource_size(&dev->res));
	if (chip->base == NULL) {
		ret = -ENOMEM;
		goto release_region;
	}

	spin_lock_init(&chip->lock);
	spin_lock_init(&chip->irq_lock);
	INIT_LIST_HEAD(&chip->list);

	chip->gc.direction_input = pl061_direction_input;
	chip->gc.direction_output = pl061_direction_output;
	chip->gc.get = pl061_get_value;
	chip->gc.set = pl061_set_value;
	chip->gc.base = pdata->gpio_base;
	chip->gc.ngpio = PL061_GPIO_NR;
	chip->gc.label = dev_name(&dev->dev);
	chip->gc.dev = &dev->dev;
	chip->gc.owner = THIS_MODULE;

	chip->irq_base = pdata->irq_base;

	ret = gpiochip_add(&chip->gc);
	if (ret)
		goto iounmap;

	/*
	 * irq_chip support
	 */

	if (chip->irq_base == (unsigned) -1)
		return 0;

	writeb(0, chip->base + GPIOIE); /* disable irqs */
	irq = dev->irq[0];
	if (irq < 0) {
		ret = -ENODEV;
		goto iounmap;
	}
	set_irq_chained_handler(irq, pl061_irq_handler);
	if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
		chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
		if (chip_list == NULL) {
283
			clear_bit(irq, init_irq);
284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342
			ret = -ENOMEM;
			goto iounmap;
		}
		INIT_LIST_HEAD(chip_list);
		set_irq_chip_data(irq, chip_list);
	} else
		chip_list = get_irq_chip_data(irq);
	list_add(&chip->list, chip_list);

	for (i = 0; i < PL061_GPIO_NR; i++) {
		if (pdata->directions & (1 << i))
			pl061_direction_output(&chip->gc, i,
					pdata->values & (1 << i));
		else
			pl061_direction_input(&chip->gc, i);

		set_irq_chip(i+chip->irq_base, &pl061_irqchip);
		set_irq_handler(i+chip->irq_base, handle_simple_irq);
		set_irq_flags(i+chip->irq_base, IRQF_VALID);
		set_irq_chip_data(i+chip->irq_base, chip);
	}

	return 0;

iounmap:
	iounmap(chip->base);
release_region:
	release_mem_region(dev->res.start, resource_size(&dev->res));
free_mem:
	kfree(chip);

	return ret;
}

static struct amba_id pl061_ids[] __initdata = {
	{
		.id	= 0x00041061,
		.mask	= 0x000fffff,
	},
	{ 0, 0 },
};

static struct amba_driver pl061_gpio_driver = {
	.drv = {
		.name	= "pl061_gpio",
	},
	.id_table	= pl061_ids,
	.probe		= pl061_probe,
};

static int __init pl061_gpio_init(void)
{
	return amba_driver_register(&pl061_gpio_driver);
}
subsys_initcall(pl061_gpio_init);

MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("PL061 GPIO driver");
MODULE_LICENSE("GPL");