bttv-cards.c 141.7 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8
/*

    bttv-cards.c

    this file has configuration informations - card-specific stuff
    like the big tvcards array for the most part

    Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
9
			   & Marcus Metzler (mocm@thp.uni-koeln.de)
L
Linus Torvalds 已提交
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
    (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/firmware.h>
35
#include <net/checksum.h>
L
Linus Torvalds 已提交
36 37 38 39

#include <asm/io.h>

#include "bttvp.h"
40
#include <media/v4l2-common.h>
41
#include <media/tvaudio.h>
42
#include "bttv-audio-hook.h"
L
Linus Torvalds 已提交
43 44 45 46 47 48

/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static void boot_bt832(struct bttv *btv);
static void hauppauge_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
49
static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
L
Linus Torvalds 已提交
50 51
static void modtec_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
52
static void init_RTV24(struct bttv *btv);
L
Linus Torvalds 已提交
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

static void rv605_muxsel(struct bttv *btv, unsigned int input);
static void eagle_muxsel(struct bttv *btv, unsigned int input);
static void xguard_muxsel(struct bttv *btv, unsigned int input);
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);

static void PXC200_muxsel(struct bttv *btv, unsigned int input);

static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_init(struct bttv *btv);

static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
static void tibetCS16_init(struct bttv *btv);

static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
static void kodicom4400r_init(struct bttv *btv);

static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);

74 75
static void geovision_muxsel(struct bttv *btv, unsigned int input);

L
Linus Torvalds 已提交
76 77 78 79 80 81 82 83
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
static void identify_by_eeprom(struct bttv *btv,
			       unsigned char eeprom_data[256]);
static int __devinit pvr_boot(struct bttv *btv);

/* config variables */
84 85
static unsigned int triton1;
static unsigned int vsfx;
L
Linus Torvalds 已提交
86
static unsigned int latency = UNSET;
87
int no_overlay=-1;
L
Linus Torvalds 已提交
88 89 90 91 92 93 94 95 96 97

static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
#ifdef MODULE
static unsigned int autoload = 1;
#else
98
static unsigned int autoload;
L
Linus Torvalds 已提交
99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
#endif
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };

/* insmod options */
module_param(triton1,    int, 0444);
module_param(vsfx,       int, 0444);
module_param(no_overlay, int, 0444);
module_param(latency,    int, 0444);
module_param(gpiomask,   int, 0444);
module_param(audioall,   int, 0444);
module_param(autoload,   int, 0444);

module_param_array(card,     int, NULL, 0444);
module_param_array(pll,      int, NULL, 0444);
module_param_array(tuner,    int, NULL, 0444);
module_param_array(svhs,     int, NULL, 0444);
module_param_array(remote,   int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);

MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
		 "[enable bug compatibility for triton1 + others]");
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
		 "[yet another chipset flaw workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
129 130
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
		" [some VIA/SIS chipsets are known to have problem with overlay]");
L
Linus Torvalds 已提交
131 132 133 134 135 136 137 138 139

/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards                                       */

static struct CARD {
	unsigned id;
	int cardnr;
	char *name;
} cards[] __devinitdata = {
140 141 142 143 144 145 146 147
	{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
	{ 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
	{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
	{ 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
	{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
	{ 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
	{ 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
	{ 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
148
	{ 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
149 150 151 152 153 154 155 156 157

	{ 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
	{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },

	{ 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
	{ 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
	{ 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
	{ 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
	{ 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
158
	{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
159 160
	{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
	{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
161
	{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
162 163

	{ 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
164
	/* some cards ship with byteswapped IDs ... */
165 166
	{ 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
	{ 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
167
	/* this seems to happen as well ... */
168 169
	{ 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },

170 171
	{ 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
	{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194
	{ 0x3060121a, BTTV_BOARD_STB2,	  "3Dfx VoodooTV 100/ STB OEM" },

	{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
	{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
	{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
	{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
	{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
	{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
	{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },

	{ 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
	{ 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
	{ 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
	{ 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
	{ 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },

	{ 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
	{ 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
	{ 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
	{ 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },

	{ 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
	{ 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
195
	/* clashes with FlyVideo
196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259
	 *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
	{ 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
	{ 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
	{ 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
	{ 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */

	{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
	{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
	{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
	{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
	{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },

	{ 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
	{ 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
	{ 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
	{ 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
	{ 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },

	{ 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
	{ 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
	{ 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
	{ 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },

	{ 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
	{ 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
	{ 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
	{ 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },

	{ 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
	{ 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
	{ 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
	{ 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
	{ 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
	{ 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
	{ 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
	{ 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
	{ 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
	{ 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
	{ 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },

	{ 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
	{ 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },

	{ 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
	{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
	{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
	{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
	{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
	{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },

260
	{ 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
261 262 263 264 265 266 267 268 269 270
	{ 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },

	{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
	{ 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
	{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
	{ 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
	{ 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
	{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
	{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
	{ 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
271
	{ 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
272 273 274 275 276 277 278 279 280 281

	{ 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
	{ 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },

	{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
	{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
	{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
	{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },

	{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
L
Linus Torvalds 已提交
282

283 284 285
	{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
	{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },

286
	/* likely broken, vendor id doesn't match the other magic views ...
287
	 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
288

289 290 291
	/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
	* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */

292
	/* DVB cards (using pci function .1 for mpeg data xfer) */
293
	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
294 295
	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
	{ 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
296 297 298 299
	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
	{ 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
300
	{ 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
301
	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
302
	{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
303
	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
304
	{ 0x00261822, BTTV_BOARD_TWINHAN_DST,	"DNTV Live! Mini "},
305
	{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,	"DViCO FusionHDTV 2" },
306
	{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600,	"GeoVision GV-600" },
L
Linus Torvalds 已提交
307 308 309 310 311 312 313 314

	{ 0, -1, NULL }
};

/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards               */

struct tvcard bttv_tvcards[] = {
315
	/* ---- card 0x00 ---------------------------------- */
316
	[BTTV_BOARD_UNKNOWN] = {
317 318 319 320 321
		.name		= " *** UNKNOWN/GENERIC *** ",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
M
 
Michael Krufky 已提交
322
		.muxsel		= { 2, 3, 1, 0 },
323
		.tuner_type	= UNSET,
324
		.tuner_addr	= ADDR_UNSET,
325
		.radio_addr     = ADDR_UNSET,
326
	},
327
	[BTTV_BOARD_MIRO] = {
328 329 330 331 332 333
		.name		= "MIRO PCTV",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
334
		.muxsel		= { 2, 3, 1, 1 },
335 336
		.gpiomux 	= { 2, 0, 0, 0 },
		.gpiomute 	= 10,
337
		.needs_tvaudio	= 1,
338
		.tuner_type	= UNSET,
339
		.tuner_addr	= ADDR_UNSET,
340
		.radio_addr     = ADDR_UNSET,
341
	},
342
	[BTTV_BOARD_HAUPPAUGE] = {
343 344 345 346 347 348
		.name		= "Hauppauge (bt848)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 7,
M
 
Michael Krufky 已提交
349
		.muxsel		= { 2, 3, 1, 1 },
350 351
		.gpiomux 	= { 0, 1, 2, 3 },
		.gpiomute 	= 4,
352
		.needs_tvaudio	= 1,
353
		.tuner_type	= UNSET,
354
		.tuner_addr	= ADDR_UNSET,
355
		.radio_addr     = ADDR_UNSET,
356
	},
357
	[BTTV_BOARD_STB] = {
358 359 360 361 362 363
		.name		= "STB, Gateway P/N 6000699 (bt848)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 7,
M
 
Michael Krufky 已提交
364
		.muxsel		= { 2, 3, 1, 1 },
365 366
		.gpiomux 	= { 4, 0, 2, 3 },
		.gpiomute 	= 1,
367 368 369 370
		.no_msp34xx	= 1,
		.needs_tvaudio	= 1,
		.tuner_type     = TUNER_PHILIPS_NTSC,
		.tuner_addr	= ADDR_UNSET,
371
		.radio_addr     = ADDR_UNSET,
372 373 374 375 376
		.pll            = PLL_28,
		.has_radio      = 1,
	},

	/* ---- card 0x04 ---------------------------------- */
377
	[BTTV_BOARD_INTEL] = {
378 379 380
		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
		.video_inputs	= 4,
		.audio_inputs	= 0,
381
		.tuner		= UNSET,
382 383
		.svhs		= 2,
		.gpiomask	= 0,
M
 
Michael Krufky 已提交
384
		.muxsel		= { 2, 3, 1, 1 },
385
		.gpiomux 	= { 0 },
386
		.needs_tvaudio	= 0,
387
		.tuner_type	= TUNER_ABSENT,
388
		.tuner_addr	= ADDR_UNSET,
389
		.radio_addr     = ADDR_UNSET,
390
	},
391
	[BTTV_BOARD_DIAMOND] = {
392 393 394 395 396 397
		.name		= "Diamond DTV2000",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 3,
M
 
Michael Krufky 已提交
398
		.muxsel		= { 2, 3, 1, 0 },
399 400
		.gpiomux 	= { 0, 1, 0, 1 },
		.gpiomute 	= 3,
401
		.needs_tvaudio	= 1,
402
		.tuner_type	= UNSET,
403
		.tuner_addr	= ADDR_UNSET,
404
		.radio_addr     = ADDR_UNSET,
405
	},
406
	[BTTV_BOARD_AVERMEDIA] = {
407 408 409 410 411
		.name		= "AVerMedia TVPhone",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 3,
M
 
Michael Krufky 已提交
412
		.muxsel		= { 2, 3, 1, 1 },
413
		.gpiomask	= 0x0f,
414
		.gpiomux 	= { 0x0c, 0x04, 0x08, 0x04 },
415 416
		/*                0x04 for some cards ?? */
		.needs_tvaudio	= 1,
417
		.tuner_type	= UNSET,
418
		.tuner_addr	= ADDR_UNSET,
419
		.radio_addr     = ADDR_UNSET,
420
		.audio_mode_gpio= avermedia_tvphone_audio,
421 422
		.has_remote     = 1,
	},
423
	[BTTV_BOARD_MATRIX_VISION] = {
424 425 426
		.name		= "MATRIX-Vision MV-Delta",
		.video_inputs	= 5,
		.audio_inputs	= 1,
427
		.tuner		= UNSET,
428 429
		.svhs		= 3,
		.gpiomask	= 0,
M
 
Michael Krufky 已提交
430
		.muxsel		= { 2, 3, 1, 0, 0 },
431
		.gpiomux 	= { 0 },
432
		.needs_tvaudio	= 1,
433
		.tuner_type	= UNSET,
434
		.tuner_addr	= ADDR_UNSET,
435
		.radio_addr     = ADDR_UNSET,
436 437 438
	},

	/* ---- card 0x08 ---------------------------------- */
439
	[BTTV_BOARD_FLYVIDEO] = {
440 441 442 443 444 445
		.name		= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xc00,
M
 
Michael Krufky 已提交
446
		.muxsel		= { 2, 3, 1, 1 },
447 448
		.gpiomux 	= { 0, 0xc00, 0x800, 0x400 },
		.gpiomute 	= 0xc00,
449 450
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
451
		.tuner_type	= UNSET,
452
		.tuner_addr	= ADDR_UNSET,
453
		.radio_addr     = ADDR_UNSET,
454
	},
455
	[BTTV_BOARD_TURBOTV] = {
456 457 458 459 460 461
		.name		= "IMS/IXmicro TurboTV",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 3,
M
 
Michael Krufky 已提交
462
		.muxsel		= { 2, 3, 1, 1 },
463
		.gpiomux 	= { 1, 1, 2, 3 },
464 465 466 467
		.needs_tvaudio	= 0,
		.pll		= PLL_28,
		.tuner_type	= TUNER_TEMIC_PAL,
		.tuner_addr	= ADDR_UNSET,
468
		.radio_addr     = ADDR_UNSET,
469
	},
470
	[BTTV_BOARD_HAUPPAUGE878] = {
471 472 473 474 475 476
		.name		= "Hauppauge (bt878)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x0f, /* old: 7 */
M
 
Michael Krufky 已提交
477
		.muxsel		= { 2, 0, 1, 1 },
478 479
		.gpiomux 	= { 0, 1, 2, 3 },
		.gpiomute 	= 4,
480 481
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
482
		.tuner_type	= UNSET,
483
		.tuner_addr	= ADDR_UNSET,
484
		.radio_addr     = ADDR_UNSET,
485
	},
486
	[BTTV_BOARD_MIROPRO] = {
487 488 489 490 491 492
		.name		= "MIRO PCTV pro",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x3014f,
M
 
Michael Krufky 已提交
493
		.muxsel		= { 2, 3, 1, 1 },
494 495
		.gpiomux 	= { 0x20001,0x10001, 0, 0 },
		.gpiomute 	= 10,
496
		.needs_tvaudio	= 1,
497
		.tuner_type	= UNSET,
498
		.tuner_addr	= ADDR_UNSET,
499
		.radio_addr     = ADDR_UNSET,
500 501 502
	},

	/* ---- card 0x0c ---------------------------------- */
503
	[BTTV_BOARD_ADSTECH_TV] = {
504 505 506 507 508 509
		.name		= "ADS Technologies Channel Surfer TV (bt848)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
510
		.muxsel		= { 2, 3, 1, 1 },
511
		.gpiomux 	= { 13, 14, 11, 7 },
512
		.needs_tvaudio	= 1,
513
		.tuner_type	= UNSET,
514
		.tuner_addr	= ADDR_UNSET,
515
		.radio_addr     = ADDR_UNSET,
516
	},
517
	[BTTV_BOARD_AVERMEDIA98] = {
518 519 520 521 522 523
		.name		= "AVerMedia TVCapture 98",
		.video_inputs	= 3,
		.audio_inputs	= 4,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
524
		.muxsel		= { 2, 3, 1, 1 },
525
		.gpiomux 	= { 13, 14, 11, 7 },
526 527 528 529 530
		.needs_tvaudio	= 1,
		.msp34xx_alt    = 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
531
		.radio_addr     = ADDR_UNSET,
532
		.audio_mode_gpio= avermedia_tv_stereo_audio,
533
		.no_gpioirq     = 1,
534
	},
535
	[BTTV_BOARD_VHX] = {
536 537 538 539 540 541
		.name		= "Aimslab Video Highway Xtreme (VHX)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 7,
M
 
Michael Krufky 已提交
542
		.muxsel		= { 2, 3, 1, 1 },
543 544
		.gpiomux 	= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
		.gpiomute 	= 4,
545 546
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
547
		.tuner_type	= UNSET,
548
		.tuner_addr	= ADDR_UNSET,
549
		.radio_addr     = ADDR_UNSET,
550
	},
551
	[BTTV_BOARD_ZOLTRIX] = {
552 553 554 555 556 557
		.name		= "Zoltrix TV-Max",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
558
		.muxsel		= { 2, 3, 1, 1 },
559 560
		.gpiomux 	= { 0, 0, 1, 0 },
		.gpiomute 	= 10,
561
		.needs_tvaudio	= 1,
562
		.tuner_type	= UNSET,
563
		.tuner_addr	= ADDR_UNSET,
564
		.radio_addr     = ADDR_UNSET,
565 566 567
	},

	/* ---- card 0x10 ---------------------------------- */
568
	[BTTV_BOARD_PIXVIEWPLAYTV] = {
569 570 571 572 573 574
		.name		= "Prolink Pixelview PlayTV (bt878)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x01fe00,
M
 
Michael Krufky 已提交
575
		.muxsel		= { 2, 3, 1, 1 },
576
		/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
577 578
		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
		.gpiomute 	= 0x002000,
579 580
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
581
		.tuner_type	= UNSET,
582 583
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
584
	},
585
	[BTTV_BOARD_WINVIEW_601] = {
586 587 588 589 590 591
		.name		= "Leadtek WinView 601",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x8300f8,
M
 
Michael Krufky 已提交
592
		.muxsel		= { 2, 3, 1, 1,0 },
593 594
		.gpiomux 	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
		.gpiomute 	= 0xcfa007,
595
		.needs_tvaudio	= 1,
596
		.tuner_type	= UNSET,
597
		.tuner_addr	= ADDR_UNSET,
598
		.radio_addr     = ADDR_UNSET,
599
		.volume_gpio	= winview_volume,
600 601
		.has_radio	= 1,
	},
602
	[BTTV_BOARD_AVEC_INTERCAP] = {
603 604 605 606 607 608
		.name		= "AVEC Intercapture",
		.video_inputs	= 3,
		.audio_inputs	= 2,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0,
M
 
Michael Krufky 已提交
609
		.muxsel		= { 2, 3, 1, 1 },
610
		.gpiomux 	= { 1, 0, 0, 0 },
611
		.needs_tvaudio	= 1,
612
		.tuner_type	= UNSET,
613
		.tuner_addr	= ADDR_UNSET,
614
		.radio_addr     = ADDR_UNSET,
615
	},
616
	[BTTV_BOARD_LIFE_FLYKIT] = {
617 618 619
		.name		= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
620 621
		.tuner		= UNSET,
		.svhs		= UNSET,
622
		.gpiomask	= 0x8dff00,
M
 
Michael Krufky 已提交
623
		.muxsel		= { 2, 3, 1, 1 },
624
		.gpiomux 	= { 0 },
625
		.no_msp34xx	= 1,
626
		.tuner_type	= UNSET,
627
		.tuner_addr	= ADDR_UNSET,
628
		.radio_addr     = ADDR_UNSET,
629 630 631
	},

	/* ---- card 0x14 ---------------------------------- */
632
	[BTTV_BOARD_CEI_RAFFLES] = {
633 634 635 636 637
		.name		= "CEI Raffles Card",
		.video_inputs	= 3,
		.audio_inputs	= 3,
		.tuner		= 0,
		.svhs		= 2,
M
 
Michael Krufky 已提交
638
		.muxsel		= { 2, 3, 1, 1 },
639
		.tuner_type	= UNSET,
640
		.tuner_addr	= ADDR_UNSET,
641
		.radio_addr     = ADDR_UNSET,
642
	},
643
	[BTTV_BOARD_CONFERENCETV] = {
644 645 646 647 648 649
		.name		= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
		.video_inputs	= 4,
		.audio_inputs	= 2,  /* tuner, line in */
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1800,
M
 
Michael Krufky 已提交
650
		.muxsel		= { 2, 3, 1, 1 },
651 652
		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
653 654 655
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL_I,
		.tuner_addr	= ADDR_UNSET,
656
		.radio_addr     = ADDR_UNSET,
657
	},
658
	[BTTV_BOARD_PHOEBE_TVMAS] = {
659 660 661 662 663 664
		.name		= "Askey CPH050/ Phoebe Tv Master + FM",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xc00,
M
 
Michael Krufky 已提交
665
		.muxsel		= { 2, 3, 1, 1 },
666 667
		.gpiomux 	= { 0, 1, 0x800, 0x400 },
		.gpiomute 	= 0xc00,
668 669
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
670
		.tuner_type	= UNSET,
671
		.tuner_addr	= ADDR_UNSET,
672
		.radio_addr     = ADDR_UNSET,
673
	},
674
	[BTTV_BOARD_MODTEC_205] = {
675 676 677 678
		.name		= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
679
		.svhs		= UNSET,
680 681 682
		.gpiomask	= 7,
		.muxsel		= { 2, 3, -1 },
		.digital_mode   = DIGITAL_MODE_CAMERA,
683
		.gpiomux 	= { 0, 0, 0, 0 },
684 685 686 687
		.no_msp34xx	= 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
		.tuner_addr	= ADDR_UNSET,
688
		.radio_addr     = ADDR_UNSET,
689 690 691
	},

	/* ---- card 0x18 ---------------------------------- */
692
	[BTTV_BOARD_MAGICTVIEW061] = {
693 694 695 696 697 698
		.name		= "Askey CPH05X/06X (bt878) [many vendors]",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xe00,
M
 
Michael Krufky 已提交
699
		.muxsel		= { 2, 3, 1, 1 },
700 701
		.gpiomux 	= {0x400, 0x400, 0x400, 0x400 },
		.gpiomute 	= 0xc00,
702 703
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
704
		.tuner_type	= UNSET,
705
		.tuner_addr	= ADDR_UNSET,
706
		.radio_addr     = ADDR_UNSET,
707 708
		.has_remote     = 1,
	},
709
	[BTTV_BOARD_VOBIS_BOOSTAR] = {
710 711 712 713 714 715
		.name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask       = 0x1f0fff,
M
 
Michael Krufky 已提交
716
		.muxsel		= { 2, 3, 1, 1 },
717 718
		.gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
		.gpiomute 	= 0x40000,
719 720 721
		.needs_tvaudio	= 0,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
722
		.radio_addr     = ADDR_UNSET,
723
		.audio_mode_gpio= terratv_audio,
724
	},
725
	[BTTV_BOARD_HAUPPAUG_WCAM] = {
726 727 728 729 730 731
		.name		= "Hauppauge WinCam newer (bt878)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 3,
		.gpiomask	= 7,
M
 
Michael Krufky 已提交
732
		.muxsel		= { 2, 0, 1, 1 },
733 734
		.gpiomux 	= { 0, 1, 2, 3 },
		.gpiomute 	= 4,
735
		.needs_tvaudio	= 1,
736
		.tuner_type	= UNSET,
737
		.tuner_addr	= ADDR_UNSET,
738
		.radio_addr     = ADDR_UNSET,
739
	},
740
	[BTTV_BOARD_MAXI] = {
741 742 743 744 745 746
		.name		= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
		.video_inputs	= 4,
		.audio_inputs	= 2,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1800,
M
 
Michael Krufky 已提交
747
		.muxsel		= { 2, 3, 1, 1 },
748 749
		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
750 751 752
		.pll            = PLL_28,
		.tuner_type	= TUNER_PHILIPS_SECAM,
		.tuner_addr	= ADDR_UNSET,
753
		.radio_addr     = ADDR_UNSET,
754 755 756
	},

	/* ---- card 0x1c ---------------------------------- */
757
	[BTTV_BOARD_TERRATV] = {
758 759 760 761 762 763
		.name           = "Terratec TerraTV+ Version 1.1 (bt878)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1f0fff,
M
 
Michael Krufky 已提交
764
		.muxsel		= { 2, 3, 1, 1 },
765 766
		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0x00000 },
		.gpiomute 	= 0x40000,
767 768 769
		.needs_tvaudio	= 0,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
770
		.radio_addr     = ADDR_UNSET,
771
		.audio_mode_gpio= terratv_audio,
772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800
		/* GPIO wiring:
		External 20 pin connector (for Active Radio Upgrade board)
		gpio00: i2c-sda
		gpio01: i2c-scl
		gpio02: om5610-data
		gpio03: om5610-clk
		gpio04: om5610-wre
		gpio05: om5610-stereo
		gpio06: rds6588-davn
		gpio07: Pin 7 n.c.
		gpio08: nIOW
		gpio09+10: nIOR, nSEL ?? (bt878)
			gpio09: nIOR (bt848)
			gpio10: nSEL (bt848)
		Sound Routing:
		gpio16: u2-A0 (1st 4052bt)
		gpio17: u2-A1
		gpio18: u2-nEN
		gpio19: u4-A0 (2nd 4052)
		gpio20: u4-A1
			u4-nEN - GND
		Btspy:
			00000 : Cdrom (internal audio input)
			10000 : ext. Video audio input
			20000 : TV Mono
			a0000 : TV Mono/2
		1a0000 : TV Stereo
			30000 : Radio
			40000 : Mute
801
	*/
802 803

	},
804
	[BTTV_BOARD_PXC200] = {
805 806 807 808
		/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
		.name		= "Imagenation PXC200",
		.video_inputs	= 5,
		.audio_inputs	= 1,
809
		.tuner		= UNSET,
810 811 812
		.svhs		= 1, /* was: 4 */
		.gpiomask	= 0,
		.muxsel		= { 2, 3, 1, 0, 0},
813
		.gpiomux 	= { 0 },
814
		.needs_tvaudio	= 1,
815
		.tuner_type	= UNSET,
816
		.tuner_addr	= ADDR_UNSET,
817
		.radio_addr     = ADDR_UNSET,
818 819 820
		.muxsel_hook    = PXC200_muxsel,

	},
821
	[BTTV_BOARD_FLYVIDEO_98] = {
822 823 824 825 826 827
		.name		= "Lifeview FlyVideo 98 LR50",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1800,  /* 0x8dfe00 */
M
 
Michael Krufky 已提交
828
		.muxsel		= { 2, 3, 1, 1 },
829 830
		.gpiomux 	= { 0, 0x0800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
831
		.pll            = PLL_28,
832
		.tuner_type	= UNSET,
833
		.tuner_addr	= ADDR_UNSET,
834
		.radio_addr     = ADDR_UNSET,
835
	},
836
	[BTTV_BOARD_IPROTV] = {
837 838 839 840 841 842
		.name		= "Formac iProTV, Formac ProTV I (bt848)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 3,
		.gpiomask	= 1,
M
 
Michael Krufky 已提交
843
		.muxsel		= { 2, 3, 1, 1 },
844
		.gpiomux 	= { 1, 0, 0, 0 },
845 846 847
		.pll            = PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
848
		.radio_addr     = ADDR_UNSET,
849 850 851
	},

	/* ---- card 0x20 ---------------------------------- */
852
	[BTTV_BOARD_INTEL_C_S_PCI] = {
853 854 855
		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
		.video_inputs	= 4,
		.audio_inputs	= 0,
856
		.tuner		= UNSET,
857 858
		.svhs		= 2,
		.gpiomask	= 0,
M
 
Michael Krufky 已提交
859
		.muxsel		= { 2, 3, 1, 1 },
860
		.gpiomux 	= { 0 },
861
		.needs_tvaudio	= 0,
862
		.tuner_type	= TUNER_ABSENT,
863
		.tuner_addr	= ADDR_UNSET,
864
		.radio_addr     = ADDR_UNSET,
865
	},
866
	[BTTV_BOARD_TERRATVALUE] = {
867 868 869 870 871 872
		.name           = "Terratec TerraTValue Version Bt878",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xffff00,
M
 
Michael Krufky 已提交
873
		.muxsel		= { 2, 3, 1, 1 },
874 875
		.gpiomux 	= { 0x500, 0, 0x300, 0x900 },
		.gpiomute 	= 0x900,
876 877 878 879
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
880
		.radio_addr     = ADDR_UNSET,
881
	},
882
	[BTTV_BOARD_WINFAST2000] = {
883 884 885 886 887
		.name		= "Leadtek WinFast 2000/ WinFast 2000 XP",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
M
 
Michael Krufky 已提交
888
		.muxsel		= { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
889 890
		/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
		.gpiomask	= 0xb33000,
891 892
		.gpiomux 	= { 0x122000,0x1000,0x0000,0x620000 },
		.gpiomute 	= 0x800000,
893 894 895 896 897 898 899 900 901 902 903 904 905 906
		/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
			gpio23 -- hef4052:nEnable (0x800000)
			gpio12 -- hef4052:A1
			gpio13 -- hef4052:A0
		0x0000: external audio
		0x1000: FM
		0x2000: TV
		0x3000: n.c.
		Note: There exists another variant "Winfast 2000" with tv stereo !?
		Note: eeprom only contains FF and pci subsystem id 107d:6606
		*/
		.needs_tvaudio	= 0,
		.pll		= PLL_28,
		.has_radio	= 1,
907
		.tuner_type	= TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
908
		.tuner_addr	= ADDR_UNSET,
909
		.radio_addr     = ADDR_UNSET,
910
		.audio_mode_gpio= winfast2000_audio,
911 912
		.has_remote     = 1,
	},
913
	[BTTV_BOARD_CHRONOS_VS2] = {
914 915 916 917 918 919
		.name		= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
		.video_inputs	= 4,
		.audio_inputs	= 3,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1800,
M
 
Michael Krufky 已提交
920
		.muxsel		= { 2, 3, 1, 1 },
921 922
		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
923
		.pll		= PLL_28,
924
		.tuner_type	= UNSET,
925
		.tuner_addr	= ADDR_UNSET,
926
		.radio_addr     = ADDR_UNSET,
927 928 929
	},

	/* ---- card 0x24 ---------------------------------- */
930
	[BTTV_BOARD_TYPHOON_TVIEW] = {
931 932 933 934 935 936
		.name		= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
		.video_inputs	= 4,
		.audio_inputs	= 3,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1800,
M
 
Michael Krufky 已提交
937
		.muxsel		= { 2, 3, 1, 1 },
938 939
		.gpiomux 	= { 0, 0x800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
940
		.pll		= PLL_28,
941
		.tuner_type	= UNSET,
942
		.tuner_addr	= ADDR_UNSET,
943
		.radio_addr     = ADDR_UNSET,
944 945
		.has_radio	= 1,
	},
946
	[BTTV_BOARD_PXELVWPLTVPRO] = {
947 948 949 950 951 952 953
		.name		= "Prolink PixelView PlayTV pro",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xff,
		.muxsel		= { 2, 3, 1, 1 },
954 955
		.gpiomux 	= { 0x21, 0x20, 0x24, 0x2c },
		.gpiomute 	= 0x29,
956 957
		.no_msp34xx	= 1,
		.pll		= PLL_28,
958
		.tuner_type	= UNSET,
959
		.tuner_addr	= ADDR_UNSET,
960
		.radio_addr     = ADDR_UNSET,
961
	},
962
	[BTTV_BOARD_MAGICTVIEW063] = {
963 964 965 966 967 968
		.name		= "Askey CPH06X TView99",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x551e00,
M
 
Michael Krufky 已提交
969
		.muxsel		= { 2, 3, 1, 0 },
970 971
		.gpiomux 	= { 0x551400, 0x551200, 0, 0 },
		.gpiomute 	= 0x551c00,
972 973
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
974
		.tuner_type	= TUNER_PHILIPS_PAL_I,
975
		.tuner_addr	= ADDR_UNSET,
976
		.radio_addr     = ADDR_UNSET,
977 978
		.has_remote     = 1,
	},
979
	[BTTV_BOARD_PINNACLE] = {
980 981 982 983 984 985
		.name		= "Pinnacle PCTV Studio/Rave",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x03000F,
M
 
Michael Krufky 已提交
986
		.muxsel		= { 2, 3, 1, 1 },
987 988
		.gpiomux 	= { 2, 0xd0001, 0, 0 },
		.gpiomute 	= 1,
989 990
		.needs_tvaudio	= 0,
		.pll		= PLL_28,
991
		.tuner_type	= UNSET,
992
		.tuner_addr	= ADDR_UNSET,
993
		.radio_addr     = ADDR_UNSET,
994 995 996
	},

	/* ---- card 0x28 ---------------------------------- */
997
	[BTTV_BOARD_STB2] = {
998 999 1000 1001 1002 1003
		.name		= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 7,
M
 
Michael Krufky 已提交
1004
		.muxsel		= { 2, 3, 1, 1 },
1005 1006
		.gpiomux 	= { 4, 0, 2, 3 },
		.gpiomute 	= 1,
1007 1008 1009 1010
		.no_msp34xx	= 1,
		.needs_tvaudio	= 1,
		.tuner_type     = TUNER_PHILIPS_NTSC,
		.tuner_addr	= ADDR_UNSET,
1011
		.radio_addr     = ADDR_UNSET,
1012 1013 1014
		.pll            = PLL_28,
		.has_radio      = 1,
	},
1015
	[BTTV_BOARD_AVPHONE98] = {
1016 1017 1018 1019 1020 1021
		.name		= "AVerMedia TVPhone 98",
		.video_inputs	= 3,
		.audio_inputs	= 4,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
1022
		.muxsel		= { 2, 3, 1, 1 },
1023
		.gpiomux 	= { 13, 4, 11, 7 },
1024 1025
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
1026
		.tuner_type	= UNSET,
1027
		.tuner_addr	= ADDR_UNSET,
1028
		.radio_addr     = ADDR_UNSET,
1029
		.has_radio	= 1,
1030
		.audio_mode_gpio= avermedia_tvphone_audio,
1031
	},
1032
	[BTTV_BOARD_PV951] = {
1033 1034 1035 1036 1037 1038 1039
		.name		= "ProVideo PV951", /* pic16c54 */
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0,
		.muxsel		= { 2, 3, 1, 1},
1040
		.gpiomux 	= { 0, 0, 0, 0},
1041 1042 1043
		.needs_tvaudio	= 1,
		.no_msp34xx	= 1,
		.pll		= PLL_28,
1044
		.tuner_type	= TUNER_PHILIPS_PAL_I,
1045
		.tuner_addr	= ADDR_UNSET,
1046
		.radio_addr     = ADDR_UNSET,
1047
	},
1048
	[BTTV_BOARD_ONAIR_TV] = {
1049 1050 1051 1052 1053 1054
		.name		= "Little OnAir TV",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xe00b,
M
 
Michael Krufky 已提交
1055
		.muxsel		= { 2, 3, 1, 1 },
1056 1057
		.gpiomux 	= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
		.gpiomute 	= 0xff3ffc,
1058
		.no_msp34xx	= 1,
1059
		.tuner_type	= UNSET,
1060
		.tuner_addr	= ADDR_UNSET,
1061
		.radio_addr     = ADDR_UNSET,
1062 1063 1064
	},

	/* ---- card 0x2c ---------------------------------- */
1065
	[BTTV_BOARD_SIGMA_TVII_FM] = {
1066 1067 1068 1069
		.name		= "Sigma TVII-FM",
		.video_inputs	= 2,
		.audio_inputs	= 1,
		.tuner		= 0,
1070
		.svhs		= UNSET,
1071
		.gpiomask	= 3,
M
 
Michael Krufky 已提交
1072
		.muxsel		= { 2, 3, 1, 1 },
1073 1074
		.gpiomux 	= { 1, 1, 0, 2 },
		.gpiomute 	= 3,
1075 1076
		.no_msp34xx	= 1,
		.pll		= PLL_NONE,
1077
		.tuner_type	= UNSET,
1078
		.tuner_addr	= ADDR_UNSET,
1079
		.radio_addr     = ADDR_UNSET,
1080
	},
1081
	[BTTV_BOARD_MATRIX_VISION2] = {
1082 1083 1084
		.name		= "MATRIX-Vision MV-Delta 2",
		.video_inputs	= 5,
		.audio_inputs	= 1,
1085
		.tuner		= UNSET,
1086 1087
		.svhs		= 3,
		.gpiomask	= 0,
M
 
Michael Krufky 已提交
1088
		.muxsel		= { 2, 3, 1, 0, 0 },
1089
		.gpiomux 	= { 0 },
1090 1091
		.no_msp34xx	= 1,
		.pll		= PLL_28,
1092
		.tuner_type	= UNSET,
1093
		.tuner_addr	= ADDR_UNSET,
1094
		.radio_addr     = ADDR_UNSET,
1095
	},
1096
	[BTTV_BOARD_ZOLTRIX_GENIE] = {
1097 1098 1099 1100 1101 1102
		.name		= "Zoltrix Genie TV/FM",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xbcf03f,
M
 
Michael Krufky 已提交
1103
		.muxsel		= { 2, 3, 1, 1 },
1104 1105
		.gpiomux 	= { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
		.gpiomute 	= 0xbcb03f,
1106 1107
		.no_msp34xx	= 1,
		.pll		= PLL_28,
1108
		.tuner_type	= TUNER_TEMIC_4039FR5_NTSC,
1109
		.tuner_addr	= ADDR_UNSET,
1110
		.radio_addr     = ADDR_UNSET,
1111
	},
1112
	[BTTV_BOARD_TERRATVRADIO] = {
1113 1114 1115 1116 1117 1118
		.name		= "Terratec TV/Radio+",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x70000,
M
 
Michael Krufky 已提交
1119
		.muxsel		= { 2, 3, 1, 1 },
1120 1121
		.gpiomux 	= { 0x20000, 0x30000, 0x10000, 0 },
		.gpiomute 	= 0x40000,
1122 1123 1124
		.needs_tvaudio	= 1,
		.no_msp34xx	= 1,
		.pll		= PLL_35,
1125
		.tuner_type	= TUNER_PHILIPS_PAL_I,
1126
		.tuner_addr	= ADDR_UNSET,
1127
		.radio_addr     = ADDR_UNSET,
1128 1129 1130 1131
		.has_radio	= 1,
	},

	/* ---- card 0x30 ---------------------------------- */
1132
	[BTTV_BOARD_DYNALINK] = {
1133 1134 1135 1136 1137 1138
		.name		= "Askey CPH03x/ Dynalink Magic TView",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
1139
		.muxsel		= { 2, 3, 1, 1 },
1140 1141
		.gpiomux 	= {2,0,0,0 },
		.gpiomute 	= 1,
1142 1143
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
1144
		.tuner_type	= UNSET,
1145
		.tuner_addr	= ADDR_UNSET,
1146
		.radio_addr     = ADDR_UNSET,
1147
	},
1148
	[BTTV_BOARD_GVBCTV3PCI] = {
1149 1150 1151 1152 1153 1154
		.name		= "IODATA GV-BCTV3/PCI",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x010f00,
M
 
Michael Krufky 已提交
1155
		.muxsel		= {2, 3, 0, 0 },
1156
		.gpiomux 	= {0x10000, 0, 0x10000, 0 },
1157 1158 1159 1160
		.no_msp34xx	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_ALPS_TSHC6_NTSC,
		.tuner_addr	= ADDR_UNSET,
1161
		.radio_addr     = ADDR_UNSET,
1162
		.audio_mode_gpio= gvbctv3pci_audio,
1163
	},
1164
	[BTTV_BOARD_PXELVWPLTVPAK] = {
1165 1166 1167 1168 1169 1170 1171 1172
		.name		= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
		.video_inputs	= 5,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 3,
		.gpiomask	= 0xAA0000,
		.muxsel		= { 2,3,1,1,-1 },
		.digital_mode   = DIGITAL_MODE_CAMERA,
1173 1174
		.gpiomux 	= { 0x20000, 0, 0x80000, 0x80000 },
		.gpiomute 	= 0xa8000,
1175 1176 1177 1178
		.no_msp34xx	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL_I,
		.tuner_addr	= ADDR_UNSET,
1179
		.radio_addr     = ADDR_UNSET,
1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190
		.has_remote	= 1,
		/* GPIO wiring: (different from Rev.4C !)
			GPIO17: U4.A0 (first hef4052bt)
			GPIO19: U4.A1
			GPIO20: U5.A1 (second hef4052bt)
			GPIO21: U4.nEN
			GPIO22: BT832 Reset Line
			GPIO23: A5,A0, U5,nEN
		Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
		*/
	},
1191
	[BTTV_BOARD_EAGLE] = {
1192 1193 1194 1195 1196 1197
		.name           = "Eagle Wireless Capricorn2 (bt878A)",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 7,
M
 
Michael Krufky 已提交
1198
		.muxsel         = { 2, 0, 1, 1 },
1199 1200
		.gpiomux        = { 0, 1, 2, 3 },
		.gpiomute 	= 4,
1201
		.pll            = PLL_28,
1202
		.tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1203
		.tuner_addr	= ADDR_UNSET,
1204
		.radio_addr     = ADDR_UNSET,
1205 1206 1207
	},

	/* ---- card 0x34 ---------------------------------- */
1208
	[BTTV_BOARD_PINNACLEPRO] = {
1209 1210 1211 1212 1213 1214 1215
		/* David Härdeman <david@2gen.com> */
		.name           = "Pinnacle PCTV Studio Pro",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 3,
		.gpiomask       = 0x03000F,
M
 
Michael Krufky 已提交
1216
		.muxsel		= { 2, 3, 1, 1 },
1217 1218
		.gpiomux 	= { 1, 0xd0001, 0, 0 },
		.gpiomute 	= 10,
1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229
				/* sound path (5 sources):
				MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
					0= ext. Audio IN
					1= from MUX2
					2= Mono TV sound from Tuner
					3= not connected
				MUX2 (mask 0x30000):
					0,2,3= from MSP34xx
					1= FM stereo Radio from Tuner */
		.needs_tvaudio  = 0,
		.pll            = PLL_28,
1230
		.tuner_type     = UNSET,
1231
		.tuner_addr	= ADDR_UNSET,
1232
		.radio_addr     = ADDR_UNSET,
1233
	},
1234
	[BTTV_BOARD_TVIEW_RDS_FM] = {
1235 1236 1237 1238 1239 1240 1241 1242
		/* Claas Langbehn <claas@bigfoot.com>,
		Sven Grothklags <sven@upb.de> */
		.name		= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
		.video_inputs	= 4,
		.audio_inputs	= 3,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x1c,
M
 
Michael Krufky 已提交
1243
		.muxsel		= { 2, 3, 1, 1 },
1244 1245
		.gpiomux 	= { 0, 0, 0x10, 8 },
		.gpiomute 	= 4,
1246 1247 1248 1249
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
1250
		.radio_addr     = ADDR_UNSET,
1251 1252
		.has_radio	= 1,
	},
1253
	[BTTV_BOARD_LIFETEC_9415] = {
1254
		/* Tim Röstermundt <rosterm@uni-muenster.de>
1255 1256
		in de.comp.os.unix.linux.hardware:
			options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1257
			gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1258 1259 1260 1261 1262 1263 1264
			options tuner type=5 */
		.name		= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x18e0,
M
 
Michael Krufky 已提交
1265
		.muxsel		= { 2, 3, 1, 1 },
1266 1267
		.gpiomux 	= { 0x0000,0x0800,0x1000,0x1000 },
		.gpiomute 	= 0x18e0,
1268 1269 1270 1271 1272
			/* For cards with tda9820/tda9821:
				0x0000: Tuner normal stereo
				0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
				0x0880: Tuner A2 stereo */
		.pll		= PLL_28,
1273
		.tuner_type	= UNSET,
1274
		.tuner_addr	= ADDR_UNSET,
1275
		.radio_addr     = ADDR_UNSET,
1276
	},
1277
	[BTTV_BOARD_BESTBUY_EASYTV] = {
1278 1279 1280 1281 1282 1283 1284 1285
		/* Miguel Angel Alvarez <maacruz@navegalia.com>
		old Easy TV BT848 version (model CPH031) */
		.name           = "Askey CPH031/ BESTBUY Easy TV",
		.video_inputs	= 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0xF,
M
 
Michael Krufky 已提交
1286
		.muxsel         = { 2, 3, 1, 0 },
1287 1288
		.gpiomux        = { 2, 0, 0, 0 },
		.gpiomute 	= 10,
1289 1290 1291 1292
		.needs_tvaudio  = 0,
		.pll		= PLL_28,
		.tuner_type	= TUNER_TEMIC_PAL,
		.tuner_addr	= ADDR_UNSET,
1293
		.radio_addr     = ADDR_UNSET,
1294 1295 1296
	},

	/* ---- card 0x38 ---------------------------------- */
1297
	[BTTV_BOARD_FLYVIDEO_98FM] = {
1298 1299 1300 1301 1302 1303 1304
		/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
		.name           = "Lifeview FlyVideo 98FM LR50",
		.video_inputs   = 4,
		.audio_inputs   = 3,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x1800,
M
 
Michael Krufky 已提交
1305
		.muxsel         = { 2, 3, 1, 1 },
1306 1307
		.gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
		.gpiomute 	= 0x1800,
1308
		.pll            = PLL_28,
1309
		.tuner_type     = TUNER_PHILIPS_PAL,
1310
		.tuner_addr	= ADDR_UNSET,
1311
		.radio_addr     = ADDR_UNSET,
1312 1313 1314 1315
	},
		/* This is the ultimate cheapo capture card
		* just a BT848A on a small PCB!
		* Steve Hosgood <steve@equiinet.com> */
1316
	[BTTV_BOARD_GRANDTEC] = {
1317 1318 1319
		.name           = "GrandTec 'Grand Video Capture' (Bt848)",
		.video_inputs   = 2,
		.audio_inputs   = 0,
1320
		.tuner          = UNSET,
1321 1322 1323
		.svhs           = 1,
		.gpiomask       = 0,
		.muxsel         = { 3, 1 },
1324
		.gpiomux        = { 0 },
1325 1326 1327
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_35,
1328
		.tuner_type     = UNSET,
1329
		.tuner_addr	= ADDR_UNSET,
1330
		.radio_addr     = ADDR_UNSET,
1331
	},
1332
	[BTTV_BOARD_ASKEY_CPH060] = {
1333 1334 1335 1336 1337 1338 1339 1340
		/* Daniel Herrington <daniel.herrington@home.com> */
		.name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0xe00,
		.muxsel         = { 2, 3, 1, 1},
1341 1342
		.gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
		.gpiomute 	= 0x800,
1343 1344 1345 1346
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
		.tuner_addr	= ADDR_UNSET,
1347
		.radio_addr     = ADDR_UNSET,
1348
	},
1349
	[BTTV_BOARD_ASKEY_CPH03X] = {
1350 1351 1352 1353 1354 1355 1356
		/* Matti Mottus <mottus@physic.ut.ee> */
		.name		= "Askey CPH03x TV Capturer",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask       = 0x03000F,
M
 
Michael Krufky 已提交
1357
		.muxsel		= { 2, 3, 1, 0 },
1358 1359
		.gpiomux        = { 2, 0, 0, 0 },
		.gpiomute 	= 1,
1360
		.pll            = PLL_28,
1361
		.tuner_type	= TUNER_TEMIC_PAL,
1362
		.tuner_addr	= ADDR_UNSET,
1363
		.radio_addr     = ADDR_UNSET,
1364 1365 1366
	},

	/* ---- card 0x3c ---------------------------------- */
1367
	[BTTV_BOARD_MM100PCTV] = {
1368 1369 1370 1371 1372
		/* Philip Blundell <philb@gnu.org> */
		.name           = "Modular Technology MM100PCTV",
		.video_inputs   = 2,
		.audio_inputs   = 2,
		.tuner		= 0,
1373
		.svhs		= UNSET,
1374
		.gpiomask       = 11,
M
 
Michael Krufky 已提交
1375
		.muxsel         = { 2, 3, 1, 1 },
1376 1377
		.gpiomux        = { 2, 0, 0, 1 },
		.gpiomute 	= 8,
1378 1379 1380
		.pll            = PLL_35,
		.tuner_type     = TUNER_TEMIC_PAL,
		.tuner_addr	= ADDR_UNSET,
1381
		.radio_addr     = ADDR_UNSET,
1382
	},
1383
	[BTTV_BOARD_GMV1] = {
1384
		/* Adrian Cox <adrian@humboldt.co.uk */
1385
		.name		= "AG Electronics GMV1",
1386 1387
		.video_inputs   = 2,
		.audio_inputs   = 0,
1388
		.tuner		= UNSET,
1389
		.svhs		= 1,
1390
		.gpiomask       = 0xF,
M
 
Michael Krufky 已提交
1391
		.muxsel		= { 2, 2 },
1392
		.gpiomux        = { },
1393 1394
		.no_msp34xx     = 1,
		.needs_tvaudio  = 0,
1395
		.pll		= PLL_28,
1396
		.tuner_type     = UNSET,
1397
		.tuner_addr	= ADDR_UNSET,
1398
		.radio_addr     = ADDR_UNSET,
1399
	},
1400
	[BTTV_BOARD_BESTBUY_EASYTV2] = {
1401 1402 1403 1404 1405 1406 1407 1408 1409
		/* Miguel Angel Alvarez <maacruz@navegalia.com>
		new Easy TV BT878 version (model CPH061)
		special thanks to Informatica Mieres for providing the card */
		.name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
		.video_inputs	= 3,
		.audio_inputs   = 2,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0xFF,
M
 
Michael Krufky 已提交
1410
		.muxsel         = { 2, 3, 1, 0 },
1411 1412
		.gpiomux        = { 1, 0, 4, 4 },
		.gpiomute 	= 9,
1413 1414 1415 1416
		.needs_tvaudio  = 0,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
1417
		.radio_addr     = ADDR_UNSET,
1418
	},
1419
	[BTTV_BOARD_ATI_TVWONDER] = {
1420 1421 1422 1423 1424 1425 1426 1427
		/* Lukas Gebauer <geby@volny.cz> */
		.name		= "ATI TV-Wonder",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xf03f,
		.muxsel		= { 2, 3, 1, 0 },
1428 1429
		.gpiomux 	= { 0xbffe, 0, 0xbfff, 0 },
		.gpiomute 	= 0xbffe,
1430 1431 1432
		.pll		= PLL_28,
		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
		.tuner_addr	= ADDR_UNSET,
1433
		.radio_addr     = ADDR_UNSET,
1434 1435 1436
	},

	/* ---- card 0x40 ---------------------------------- */
1437
	[BTTV_BOARD_ATI_TVWONDERVE] = {
1438 1439 1440 1441 1442
		/* Lukas Gebauer <geby@volny.cz> */
		.name		= "ATI TV-Wonder VE",
		.video_inputs	= 2,
		.audio_inputs	= 1,
		.tuner		= 0,
1443
		.svhs		= UNSET,
1444
		.gpiomask	= 1,
M
 
Michael Krufky 已提交
1445
		.muxsel		= { 2, 3, 0, 1 },
1446
		.gpiomux 	= { 0, 0, 1, 0 },
1447 1448 1449 1450
		.no_msp34xx	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
		.tuner_addr	= ADDR_UNSET,
1451
		.radio_addr     = ADDR_UNSET,
1452
	},
1453
	[BTTV_BOARD_FLYVIDEO2000] = {
1454 1455 1456 1457 1458 1459 1460
		/* DeeJay <deejay@westel900.net (2000S) */
		.name           = "Lifeview FlyVideo 2000S LR90",
		.video_inputs   = 3,
		.audio_inputs   = 3,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask	= 0x18e0,
M
 
Michael Krufky 已提交
1461
		.muxsel		= { 2, 3, 0, 1 },
1462 1463 1464
				/* Radio changed from 1e80 to 0x800 to make
				FlyVideo2000S in .hu happy (gm)*/
				/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1465 1466
		.gpiomux 	= { 0x0000,0x0800,0x1000,0x1000 },
		.gpiomute 	= 0x1800,
1467
		.audio_mode_gpio= fv2000s_audio,
1468 1469 1470 1471
		.no_msp34xx	= 1,
		.no_tda9875	= 1,
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
1472
		.tuner_type     = TUNER_PHILIPS_PAL,
1473
		.tuner_addr	= ADDR_UNSET,
1474
		.radio_addr     = ADDR_UNSET,
1475
	},
1476
	[BTTV_BOARD_TERRATVALUER] = {
1477 1478 1479 1480 1481 1482
		.name		= "Terratec TValueRadio",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0xffff00,
M
 
Michael Krufky 已提交
1483
		.muxsel		= { 2, 3, 1, 1 },
1484 1485
		.gpiomux 	= { 0x500, 0x500, 0x300, 0x900 },
		.gpiomute 	= 0x900,
1486 1487 1488 1489
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
1490
		.radio_addr     = ADDR_UNSET,
1491 1492
		.has_radio	= 1,
	},
1493
	[BTTV_BOARD_GVBCTV4PCI] = {
1494 1495 1496 1497 1498 1499 1500
		/* TANAKA Kei <peg00625@nifty.com> */
		.name           = "IODATA GV-BCTV4/PCI",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x010f00,
M
 
Michael Krufky 已提交
1501
		.muxsel         = {2, 3, 0, 0 },
1502
		.gpiomux        = {0x10000, 0, 0x10000, 0 },
1503 1504 1505 1506
		.no_msp34xx     = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
		.tuner_addr	= ADDR_UNSET,
1507
		.radio_addr     = ADDR_UNSET,
1508
		.audio_mode_gpio= gvbctv3pci_audio,
1509 1510 1511
	},

	/* ---- card 0x44 ---------------------------------- */
1512
	[BTTV_BOARD_VOODOOTV_FM] = {
1513 1514 1515 1516 1517 1518
		.name           = "3Dfx VoodooTV FM (Euro)",
		/* try "insmod msp3400 simple=0" if you have
		* sound problems with this card. */
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
1519
		.svhs           = UNSET,
1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535
		.gpiomask       = 0x4f8a00,
		/* 0x100000: 1=MSP enabled (0=disable again)
		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
		.gpiomute 	= 0x947fff,
		/* tvtuner, radio,   external,internal, mute,  stereo
		* tuner, Composit, SVid, Composit-on-Svid-adapter */
		.muxsel         = { 2, 3 ,0 ,1 },
		.tuner_type     = TUNER_MT2032,
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.pll		= PLL_28,
		.has_radio	= 1,
	},
	[BTTV_BOARD_VOODOOTV_200] = {
		.name           = "VoodooTV 200 (USA)",
1536 1537 1538 1539 1540
		/* try "insmod msp3400 simple=0" if you have
		* sound problems with this card. */
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
1541
		.svhs           = UNSET,
1542 1543 1544
		.gpiomask       = 0x4f8a00,
		/* 0x100000: 1=MSP enabled (0=disable again)
		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1545 1546
		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
		.gpiomute 	= 0x947fff,
1547 1548
		/* tvtuner, radio,   external,internal, mute,  stereo
		* tuner, Composit, SVid, Composit-on-Svid-adapter */
M
 
Michael Krufky 已提交
1549
		.muxsel         = { 2, 3 ,0 ,1 },
1550 1551
		.tuner_type     = TUNER_MT2032,
		.tuner_addr	= ADDR_UNSET,
1552
		.radio_addr     = ADDR_UNSET,
1553 1554 1555
		.pll		= PLL_28,
		.has_radio	= 1,
	},
1556
	[BTTV_BOARD_AIMMS] = {
1557 1558 1559 1560
		/* Philip Blundell <pb@nexus.co.uk> */
		.name           = "Active Imaging AIMMS",
		.video_inputs   = 1,
		.audio_inputs   = 0,
1561 1562
		.tuner          = UNSET,
		.tuner_type     = UNSET,
1563
		.tuner_addr	= ADDR_UNSET,
1564
		.radio_addr     = ADDR_UNSET,
1565 1566 1567 1568
		.pll            = PLL_28,
		.muxsel         = { 2 },
		.gpiomask       = 0
	},
1569
	[BTTV_BOARD_PV_BT878P_PLUS] = {
1570 1571 1572 1573 1574 1575 1576
		/* Tomasz Pyra <hellfire@sedez.iq.pl> */
		.name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
		.video_inputs   = 3,
		.audio_inputs   = 4,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 15,
M
 
Michael Krufky 已提交
1577
		.muxsel         = { 2, 3, 1, 1 },
1578 1579
		.gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
		.gpiomute 	= 13,
1580 1581
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
1582
		.tuner_type     = TUNER_LG_PAL_I_FM,
1583
		.tuner_addr	= ADDR_UNSET,
1584
		.radio_addr     = ADDR_UNSET,
1585 1586 1587 1588 1589 1590 1591 1592 1593
		.has_remote     = 1,
		/* GPIO wiring:
			GPIO0: U4.A0 (hef4052bt)
			GPIO1: U4.A1
			GPIO2: U4.A1 (second hef4052bt)
			GPIO3: U4.nEN, U5.A0, A5.nEN
			GPIO8-15: vrd866b ?
		*/
	},
1594
	[BTTV_BOARD_FLYVIDEO98EZ] = {
1595 1596 1597
		.name		= "Lifeview FlyVideo 98EZ (capture only) LR51",
		.video_inputs	= 4,
		.audio_inputs   = 0,
1598
		.tuner		= UNSET,
1599
		.svhs		= 2,
M
 
Michael Krufky 已提交
1600
		.muxsel		= { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1601 1602 1603 1604
		.pll		= PLL_28,
		.no_msp34xx	= 1,
		.tuner_type	= UNSET,
		.tuner_addr	= ADDR_UNSET,
1605
		.radio_addr     = ADDR_UNSET,
1606 1607 1608
	},

	/* ---- card 0x48 ---------------------------------- */
1609
	[BTTV_BOARD_PV_BT878P_9B] = {
1610 1611 1612 1613 1614 1615 1616 1617
		/* Dariusz Kowalewski <darekk@automex.pl> */
		.name		= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
		.video_inputs	= 4,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x3f,
		.muxsel		= { 2, 3, 1, 1 },
1618 1619
		.gpiomux 	= { 0x01, 0x00, 0x03, 0x03 },
		.gpiomute 	= 0x09,
1620 1621 1622 1623
		.needs_tvaudio  = 1,
		.no_msp34xx	= 1,
		.no_tda9875	= 1,
		.pll		= PLL_28,
1624
		.tuner_type	= TUNER_PHILIPS_PAL,
1625
		.tuner_addr	= ADDR_UNSET,
1626
		.radio_addr     = ADDR_UNSET,
1627
		.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1628 1629 1630 1631 1632 1633 1634 1635 1636 1637
		.has_radio	= 1,  /* Note: not all cards have radio */
		.has_remote     = 1,
		/* GPIO wiring:
			GPIO0: A0 hef4052
			GPIO1: A1 hef4052
			GPIO3: nEN hef4052
			GPIO8-15: vrd866b
			GPIO20,22,23: R30,R29,R28
		*/
	},
1638
	[BTTV_BOARD_SENSORAY311] = {
1639 1640 1641 1642 1643
		/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
		/* you must jumper JP5 for the card to work */
		.name           = "Sensoray 311",
		.video_inputs   = 5,
		.audio_inputs   = 0,
1644
		.tuner          = UNSET,
1645 1646
		.svhs           = 4,
		.gpiomask       = 0,
M
 
Michael Krufky 已提交
1647
		.muxsel         = { 2, 3, 1, 0, 0 },
1648
		.gpiomux        = { 0 },
1649
		.needs_tvaudio  = 0,
1650
		.tuner_type     = UNSET,
1651
		.tuner_addr	= ADDR_UNSET,
1652
		.radio_addr     = ADDR_UNSET,
1653
	},
1654
	[BTTV_BOARD_RV605] = {
1655 1656 1657 1658
		/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
		.name           = "RemoteVision MX (RV605)",
		.video_inputs   = 16,
		.audio_inputs   = 0,
1659 1660
		.tuner          = UNSET,
		.svhs           = UNSET,
1661 1662 1663 1664 1665 1666
		.gpiomask       = 0x00,
		.gpiomask2      = 0x07ff,
		.muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
				0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
1667
		.tuner_type     = UNSET,
1668
		.tuner_addr	= ADDR_UNSET,
1669
		.radio_addr     = ADDR_UNSET,
1670 1671
		.muxsel_hook    = rv605_muxsel,
	},
1672
	[BTTV_BOARD_POWERCLR_MTV878] = {
1673 1674 1675 1676 1677 1678 1679
		.name           = "Powercolor MTV878/ MTV878R/ MTV878F",
		.video_inputs   = 3,
		.audio_inputs   = 2,
		.tuner		= 0,
		.svhs           = 2,
		.gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
		.muxsel         = { 2, 1, 1, },
1680 1681
		.gpiomux        = { 0, 1, 2, 2 },
		.gpiomute 	= 4,
1682 1683 1684
		.needs_tvaudio  = 0,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
1685
		.radio_addr     = ADDR_UNSET,
1686 1687 1688 1689 1690
		.pll		= PLL_28,
		.has_radio	= 1,
	},

	/* ---- card 0x4c ---------------------------------- */
1691
	[BTTV_BOARD_WINDVR] = {
1692 1693 1694 1695 1696 1697 1698 1699
		/* Masaki Suzuki <masaki@btree.org> */
		.name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x140007,
		.muxsel         = { 2, 3, 1, 1 },
1700 1701
		.gpiomux        = { 0, 1, 2, 3 },
		.gpiomute 	= 4,
1702 1703
		.tuner_type     = TUNER_PHILIPS_NTSC,
		.tuner_addr	= ADDR_UNSET,
1704
		.radio_addr     = ADDR_UNSET,
1705
		.audio_mode_gpio= windvr_audio,
1706
	},
1707
	[BTTV_BOARD_GRANDTEC_MULTI] = {
1708 1709 1710
		.name           = "GrandTec Multi Capture Card (Bt878)",
		.video_inputs   = 4,
		.audio_inputs   = 0,
1711 1712
		.tuner          = UNSET,
		.svhs           = UNSET,
1713 1714
		.gpiomask       = 0,
		.muxsel         = { 2, 3, 1, 0 },
1715
		.gpiomux        = { 0 },
1716 1717 1718
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
1719
		.tuner_type     = UNSET,
1720
		.tuner_addr	= ADDR_UNSET,
1721
		.radio_addr     = ADDR_UNSET,
1722
	},
1723
	[BTTV_BOARD_KWORLD] = {
1724 1725 1726 1727 1728 1729 1730
		.name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
		.video_inputs   = 4,
		.audio_inputs   = 3,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 7,
		.muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1731
		.gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1732 1733 1734
						* This card lacks external Audio In, so we mute it on Ext. & Int.
						* The PCB can take a sbx1637/sbx1673, wiring unknown.
						* This card lacks PCI subsystem ID, sigh.
1735
						* gpiomux =1: lower volume, 2+3: mute
1736 1737
						* btwincap uses 0x80000/0x80003
						*/
1738
		.gpiomute 	= 4,
1739 1740 1741
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
1742
		.tuner_type     = TUNER_PHILIPS_PAL,
1743
		.tuner_addr	= ADDR_UNSET,
1744
		.radio_addr     = ADDR_UNSET,
1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757
		/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
		radio signal strength indicators work fine. */
		.has_radio	= 1,
		/* GPIO Info:
			GPIO0,1:   HEF4052 A0,A1
			GPIO2:     HEF4052 nENABLE
			GPIO3-7:   n.c.
			GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
			GPIO14,15: ??
			GPIO16-21: n.c.
			GPIO22,23: ??
			??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
	},
1758
	[BTTV_BOARD_DSP_TCVIDEO] = {
1759 1760 1761
		/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
		.name           = "DSP Design TCVIDEO",
		.video_inputs   = 4,
1762
		.svhs           = UNSET,
M
 
Michael Krufky 已提交
1763
		.muxsel         = { 2, 3, 1, 0 },
1764
		.pll            = PLL_28,
1765
		.tuner_type     = UNSET,
1766
		.tuner_addr	= ADDR_UNSET,
1767
		.radio_addr     = ADDR_UNSET,
1768 1769 1770
	},

		/* ---- card 0x50 ---------------------------------- */
1771
	[BTTV_BOARD_HAUPPAUGEPVR] = {
1772 1773 1774 1775 1776
		.name           = "Hauppauge WinTV PVR",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
M
 
Michael Krufky 已提交
1777
		.muxsel         = { 2, 0, 1, 1 },
1778 1779
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
1780
		.tuner_type     = UNSET,
1781
		.tuner_addr	= ADDR_UNSET,
1782
		.radio_addr     = ADDR_UNSET,
1783 1784

		.gpiomask       = 7,
1785
		.gpiomux        = {7},
1786
	},
1787
	[BTTV_BOARD_GVBCTV5PCI] = {
1788 1789 1790 1791 1792 1793
		.name           = "IODATA GV-BCTV5/PCI",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x0f0f80,
M
 
Michael Krufky 已提交
1794
		.muxsel         = {2, 3, 1, 0 },
1795 1796
		.gpiomux        = {0x030000, 0x010000, 0, 0 },
		.gpiomute 	= 0x020000,
1797 1798 1799 1800
		.no_msp34xx     = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_NTSC_M,
		.tuner_addr	= ADDR_UNSET,
1801
		.radio_addr     = ADDR_UNSET,
1802
		.audio_mode_gpio= gvbctv5pci_audio,
1803 1804
		.has_radio      = 1,
	},
1805
	[BTTV_BOARD_OSPREY1x0] = {
1806 1807 1808
		.name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
		.video_inputs   = 4,                  /* id-inputs-clock */
		.audio_inputs   = 0,
1809
		.tuner          = UNSET,
1810 1811 1812
		.svhs           = 3,
		.muxsel         = { 3, 2, 0, 1 },
		.pll            = PLL_28,
1813
		.tuner_type     = UNSET,
1814
		.tuner_addr	= ADDR_UNSET,
1815
		.radio_addr     = ADDR_UNSET,
1816 1817 1818 1819
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1820
	[BTTV_BOARD_OSPREY1x0_848] = {
1821 1822 1823
		.name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
		.video_inputs   = 3,
		.audio_inputs   = 0,
1824
		.tuner          = UNSET,
1825 1826 1827
		.svhs           = 2,
		.muxsel         = { 2, 3, 1 },
		.pll            = PLL_28,
1828
		.tuner_type     = UNSET,
1829
		.tuner_addr	= ADDR_UNSET,
1830
		.radio_addr     = ADDR_UNSET,
1831 1832 1833 1834 1835 1836
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},

		/* ---- card 0x54 ---------------------------------- */
1837
	[BTTV_BOARD_OSPREY101_848] = {
1838 1839 1840
		.name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
		.video_inputs   = 2,
		.audio_inputs   = 0,
1841
		.tuner          = UNSET,
1842 1843 1844
		.svhs           = 1,
		.muxsel         = { 3, 1 },
		.pll            = PLL_28,
1845
		.tuner_type     = UNSET,
1846
		.tuner_addr	= ADDR_UNSET,
1847
		.radio_addr     = ADDR_UNSET,
1848 1849 1850 1851
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1852
	[BTTV_BOARD_OSPREY1x1] = {
1853 1854 1855
		.name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
		.video_inputs   = 1,
		.audio_inputs   = 0,
1856 1857
		.tuner          = UNSET,
		.svhs           = UNSET,
1858 1859
		.muxsel         = { 0 },
		.pll            = PLL_28,
1860
		.tuner_type     = UNSET,
1861
		.tuner_addr	= ADDR_UNSET,
1862
		.radio_addr     = ADDR_UNSET,
1863 1864 1865 1866
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1867
	[BTTV_BOARD_OSPREY1x1_SVID] = {
1868 1869 1870
		.name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
		.video_inputs   = 2,
		.audio_inputs   = 0,
1871
		.tuner          = UNSET,
1872 1873 1874
		.svhs           = 1,
		.muxsel         = { 0, 1 },
		.pll            = PLL_28,
1875
		.tuner_type     = UNSET,
1876
		.tuner_addr	= ADDR_UNSET,
1877
		.radio_addr     = ADDR_UNSET,
1878 1879 1880 1881
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1882
	[BTTV_BOARD_OSPREY2xx] = {
1883 1884 1885
		.name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
		.video_inputs   = 1,
		.audio_inputs   = 1,
1886 1887
		.tuner          = UNSET,
		.svhs           = UNSET,
1888 1889 1890 1891
		.muxsel         = { 0 },
		.pll            = PLL_28,
		.tuner_type	= UNSET,
		.tuner_addr	= ADDR_UNSET,
1892
		.radio_addr     = ADDR_UNSET,
1893 1894 1895 1896 1897 1898
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},

		/* ---- card 0x58 ---------------------------------- */
1899
	[BTTV_BOARD_OSPREY2x0_SVID] = {
1900 1901 1902
		.name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
		.video_inputs   = 2,
		.audio_inputs   = 1,
1903
		.tuner          = UNSET,
1904 1905 1906 1907 1908
		.svhs           = 1,
		.muxsel         = { 0, 1 },
		.pll            = PLL_28,
		.tuner_type	= UNSET,
		.tuner_addr	= ADDR_UNSET,
1909
		.radio_addr     = ADDR_UNSET,
1910 1911 1912 1913
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1914
	[BTTV_BOARD_OSPREY2x0] = {
1915
		.name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1916 1917
		.video_inputs   = 2,
		.audio_inputs   = 1,
1918
		.tuner          = UNSET,
1919 1920 1921 1922 1923
		.svhs           = 1,
		.muxsel         = { 2, 3 },
		.pll            = PLL_28,
		.tuner_type	= UNSET,
		.tuner_addr	= ADDR_UNSET,
1924
		.radio_addr     = ADDR_UNSET,
1925 1926 1927 1928
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1929
	[BTTV_BOARD_OSPREY500] = {
1930 1931 1932
		.name           = "Osprey 500",   /* 500 */
		.video_inputs   = 2,
		.audio_inputs   = 1,
1933
		.tuner          = UNSET,
1934 1935 1936
		.svhs           = 1,
		.muxsel         = { 2, 3 },
		.pll            = PLL_28,
1937
		.tuner_type     = UNSET,
1938
		.tuner_addr	= ADDR_UNSET,
1939
		.radio_addr     = ADDR_UNSET,
1940 1941 1942 1943
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
1944
	[BTTV_BOARD_OSPREY540] = {
1945 1946 1947
		.name           = "Osprey 540",   /* 540 */
		.video_inputs   = 4,
		.audio_inputs   = 1,
1948
		.tuner          = UNSET,
1949
		.pll            = PLL_28,
1950
		.tuner_type     = UNSET,
1951
		.tuner_addr	= ADDR_UNSET,
1952
		.radio_addr     = ADDR_UNSET,
1953 1954 1955 1956 1957 1958
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},

		/* ---- card 0x5C ---------------------------------- */
1959
	[BTTV_BOARD_OSPREY2000] = {
1960 1961 1962
		.name           = "Osprey 2000",  /* 2000 */
		.video_inputs   = 2,
		.audio_inputs   = 1,
1963
		.tuner          = UNSET,
1964 1965 1966 1967 1968
		.svhs           = 1,
		.muxsel         = { 2, 3 },
		.pll            = PLL_28,
		.tuner_type	= UNSET,
		.tuner_addr	= ADDR_UNSET,
1969
		.radio_addr     = ADDR_UNSET,
1970 1971 1972 1973
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
	},
1974
	[BTTV_BOARD_IDS_EAGLE] = {
1975 1976 1977 1978
		/* M G Berberich <berberic@forwiss.uni-passau.de> */
		.name           = "IDS Eagle",
		.video_inputs   = 4,
		.audio_inputs   = 0,
1979 1980
		.tuner          = UNSET,
		.tuner_type     = UNSET,
1981
		.tuner_addr	= ADDR_UNSET,
1982
		.radio_addr     = ADDR_UNSET,
1983
		.svhs           = UNSET,
1984 1985 1986 1987 1988 1989 1990
		.gpiomask       = 0,
		.muxsel         = { 0, 1, 2, 3 },
		.muxsel_hook    = eagle_muxsel,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.pll            = PLL_28,
	},
1991
	[BTTV_BOARD_PINNACLESAT] = {
1992 1993 1994 1995
		.name           = "Pinnacle PCTV Sat",
		.video_inputs   = 2,
		.audio_inputs   = 0,
		.svhs           = 1,
1996 1997
		.tuner          = UNSET,
		.tuner_type     = UNSET,
1998
		.tuner_addr	= ADDR_UNSET,
1999
		.radio_addr     = ADDR_UNSET,
2000 2001 2002
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
2003
		.muxsel         = { 3, 1 },
2004 2005 2006 2007
		.pll            = PLL_28,
		.no_gpioirq     = 1,
		.has_dvb        = 1,
	},
2008
	[BTTV_BOARD_FORMAC_PROTV] = {
2009 2010 2011 2012 2013 2014 2015
		.name           = "Formac ProTV II (bt878)",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 3,
		.gpiomask       = 2,
		/* TV, Comp1, Composite over SVID con, SVID */
M
 
Michael Krufky 已提交
2016
		.muxsel         = { 2, 3, 1, 1 },
2017
		.gpiomux        = { 2, 2, 0, 0 },
2018 2019 2020 2021
		.pll            = PLL_28,
		.has_radio      = 1,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2022
		.radio_addr     = ADDR_UNSET,
2023 2024 2025 2026 2027 2028
	/* sound routing:
		GPIO=0x00,0x01,0x03: mute (?)
		0x02: both TV and radio (tuner: FM1216/I)
		The card has onboard audio connectors labeled "cdrom" and "board",
		not soldered here, though unknown wiring.
		Card lacks: external audio in, pci subsystem id.
2029
	*/
2030 2031 2032
	},

		/* ---- card 0x60 ---------------------------------- */
2033
	[BTTV_BOARD_MACHTV] = {
2034 2035 2036 2037
		.name           = "MachTV",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
2038
		.svhs           = UNSET,
2039 2040
		.gpiomask       = 7,
		.muxsel         = { 2, 3, 1, 1},
2041 2042
		.gpiomux        = { 0, 1, 2, 3},
		.gpiomute 	= 4,
2043
		.needs_tvaudio  = 1,
2044
		.tuner_type     = TUNER_PHILIPS_PAL,
2045
		.tuner_addr	= ADDR_UNSET,
2046
		.radio_addr     = ADDR_UNSET,
2047
		.pll            = PLL_28,
2048
	},
2049
	[BTTV_BOARD_EURESYS_PICOLO] = {
2050 2051 2052
		.name           = "Euresys Picolo",
		.video_inputs   = 3,
		.audio_inputs   = 0,
2053
		.tuner          = UNSET,
2054 2055 2056 2057 2058 2059 2060 2061 2062
		.svhs           = 2,
		.gpiomask       = 0,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.muxsel         = { 2, 0, 1},
		.pll            = PLL_28,
		.tuner_type     = UNSET,
		.tuner_addr	= ADDR_UNSET,
2063
		.radio_addr     = ADDR_UNSET,
2064
	},
2065
	[BTTV_BOARD_PV150] = {
2066 2067 2068 2069
		/* Luc Van Hoeylandt <luc@e-magic.be> */
		.name           = "ProVideo PV150", /* 0x4f */
		.video_inputs   = 2,
		.audio_inputs   = 0,
2070 2071
		.tuner          = UNSET,
		.svhs           = UNSET,
2072 2073
		.gpiomask       = 0,
		.muxsel         = { 2, 3 },
2074
		.gpiomux        = { 0 },
2075 2076 2077 2078 2079
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
		.tuner_type     = UNSET,
		.tuner_addr	= ADDR_UNSET,
2080
		.radio_addr     = ADDR_UNSET,
2081
	},
2082
	[BTTV_BOARD_AD_TVK503] = {
2083 2084 2085 2086 2087 2088 2089 2090 2091 2092
		/* Hiroshi Takekawa <sian@big.or.jp> */
		/* This card lacks subsystem ID */
		.name           = "AD-TVK503", /* 0x63 */
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x001e8007,
		.muxsel         = { 2, 3, 1, 0 },
		/*                  Tuner, Radio, external, internal, off,  on */
2093 2094
		.gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
		.gpiomute 	= 0x0f,
2095 2096 2097
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
2098
		.tuner_type     = TUNER_PHILIPS_NTSC,
2099
		.tuner_addr	= ADDR_UNSET,
2100
		.radio_addr     = ADDR_UNSET,
2101
		.audio_mode_gpio= adtvk503_audio,
2102 2103 2104
	},

		/* ---- card 0x64 ---------------------------------- */
2105
	[BTTV_BOARD_HERCULES_SM_TV] = {
2106 2107 2108 2109 2110 2111 2112 2113 2114 2115
		.name           = "Hercules Smart TV Stereo",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x00,
		.muxsel         = { 2, 3, 1, 1 },
		.needs_tvaudio  = 1,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
2116
		.tuner_type     = TUNER_PHILIPS_PAL,
2117
		.tuner_addr	= ADDR_UNSET,
2118
		.radio_addr     = ADDR_UNSET,
2119 2120 2121 2122 2123 2124 2125 2126 2127 2128
		/* Notes:
		- card lacks subsystem ID
		- stereo variant w/ daughter board with tda9874a @0xb0
		- Audio Routing:
			always from tda9874 independent of GPIO (?)
			external line in: unknown
		- Other chips: em78p156elp @ 0x96 (probably IR remote control)
			hef4053 (instead 4052) for unknown function
		*/
	},
2129
	[BTTV_BOARD_PACETV] = {
2130 2131 2132 2133 2134
		.name           = "Pace TV & Radio Card",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
M
 
Michael Krufky 已提交
2135
		.muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2136 2137 2138
		.gpiomask       = 0,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
2139
		.tuner_type     = TUNER_PHILIPS_PAL_I,
2140
		.tuner_addr	= ADDR_UNSET,
2141
		.radio_addr     = ADDR_UNSET,
2142 2143 2144 2145 2146 2147 2148 2149 2150
		.has_radio      = 1,
		.pll            = PLL_28,
		/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
		only internal line out: (4pin header) RGGL
		Radio must be decoded by msp3410d (not routed through)*/
		/*
		.digital_mode   = DIGITAL_MODE_CAMERA,  todo!
		*/
	},
2151
	[BTTV_BOARD_IVC200] = {
2152 2153 2154 2155
		/* Chris Willing <chris@vislab.usyd.edu.au> */
		.name           = "IVC-200",
		.video_inputs   = 1,
		.audio_inputs   = 0,
2156 2157
		.tuner          = UNSET,
		.tuner_type     = UNSET,
2158
		.tuner_addr	= ADDR_UNSET,
2159
		.radio_addr     = ADDR_UNSET,
2160
		.svhs           = UNSET,
2161 2162 2163 2164
		.gpiomask       = 0xdf,
		.muxsel         = { 2 },
		.pll            = PLL_28,
	},
2165
	[BTTV_BOARD_XGUARD] = {
2166 2167 2168
		.name           = "Grand X-Guard / Trust 814PCI",
		.video_inputs   = 16,
		.audio_inputs   = 0,
2169 2170 2171
		.tuner          = UNSET,
		.svhs           = UNSET,
		.tuner_type     = TUNER_ABSENT,
2172
		.tuner_addr	= ADDR_UNSET,
2173
		.radio_addr     = ADDR_UNSET,
2174 2175 2176 2177 2178 2179 2180 2181 2182 2183
		.gpiomask2      = 0xff,
		.muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
		.muxsel_hook    = xguard_muxsel,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll            = PLL_28,
	},

		/* ---- card 0x68 ---------------------------------- */
2184
	[BTTV_BOARD_NEBULA_DIGITV] = {
2185 2186
		.name           = "Nebula Electronics DigiTV",
		.video_inputs   = 1,
2187 2188
		.tuner          = UNSET,
		.svhs           = UNSET,
M
 
Michael Krufky 已提交
2189
		.muxsel         = { 2, 3, 1, 0 },
2190 2191 2192 2193
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll            = PLL_28,
2194
		.tuner_type     = UNSET,
2195
		.tuner_addr	= ADDR_UNSET,
2196
		.radio_addr     = ADDR_UNSET,
2197
		.has_dvb        = 1,
2198 2199
		.has_remote	= 1,
		.gpiomask	= 0x1b,
2200 2201
		.no_gpioirq     = 1,
	},
2202
	[BTTV_BOARD_PV143] = {
2203 2204 2205 2206
		/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
		.name           = "ProVideo PV143",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2207 2208
		.tuner          = UNSET,
		.svhs           = UNSET,
2209 2210
		.gpiomask       = 0,
		.muxsel         = { 2, 3, 1, 0 },
2211
		.gpiomux        = { 0 },
2212 2213 2214
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.pll            = PLL_28,
2215
		.tuner_type     = UNSET,
2216
		.tuner_addr	= ADDR_UNSET,
2217
		.radio_addr     = ADDR_UNSET,
2218
	},
2219
	[BTTV_BOARD_VD009X1_MINIDIN] = {
2220 2221 2222 2223
		/* M.Klahr@phytec.de */
		.name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2224
		.tuner          = UNSET, /* card has no tuner */
2225 2226
		.svhs           = 3,
		.gpiomask       = 0x00,
M
 
Michael Krufky 已提交
2227
		.muxsel         = { 2, 3, 1, 0 },
2228
		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2229 2230
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
2231
		.tuner_type     = UNSET,
2232
		.tuner_addr	= ADDR_UNSET,
2233
		.radio_addr     = ADDR_UNSET,
2234
	},
2235
	[BTTV_BOARD_VD009X1_COMBI] = {
2236 2237 2238
		.name           = "PHYTEC VD-009-X1 Combi (bt878)",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2239
		.tuner          = UNSET, /* card has no tuner */
2240 2241
		.svhs           = 3,
		.gpiomask       = 0x00,
M
 
Michael Krufky 已提交
2242
		.muxsel         = { 2, 3, 1, 1 },
2243
		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2244 2245
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
2246
		.tuner_type     = UNSET,
2247
		.tuner_addr	= ADDR_UNSET,
2248
		.radio_addr     = ADDR_UNSET,
2249 2250 2251
	},

		/* ---- card 0x6c ---------------------------------- */
2252
	[BTTV_BOARD_VD009_MINIDIN] = {
2253 2254 2255
		.name           = "PHYTEC VD-009 MiniDIN (bt878)",
		.video_inputs   = 10,
		.audio_inputs   = 0,
2256
		.tuner          = UNSET, /* card has no tuner */
2257 2258 2259 2260 2261 2262
		.svhs           = 9,
		.gpiomask       = 0x00,
		.gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
					via the upper nibble of muxsel. here: used for
					xternal video-mux */
		.muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2263
		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2264 2265
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
2266
		.tuner_type     = UNSET,
2267
		.tuner_addr	= ADDR_UNSET,
2268
		.radio_addr     = ADDR_UNSET,
2269
	},
2270
	[BTTV_BOARD_VD009_COMBI] = {
2271 2272 2273
		.name           = "PHYTEC VD-009 Combi (bt878)",
		.video_inputs   = 10,
		.audio_inputs   = 0,
2274
		.tuner          = UNSET, /* card has no tuner */
2275 2276 2277 2278 2279 2280
		.svhs           = 9,
		.gpiomask       = 0x00,
		.gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
					via the upper nibble of muxsel. here: used for
					xternal video-mux */
		.muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2281
		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2282 2283
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
2284
		.tuner_type     = UNSET,
2285
		.tuner_addr	= ADDR_UNSET,
2286
		.radio_addr     = ADDR_UNSET,
2287
	},
2288
	[BTTV_BOARD_IVC100] = {
2289 2290 2291
		.name           = "IVC-100",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2292 2293
		.tuner          = UNSET,
		.tuner_type     = UNSET,
2294
		.tuner_addr	= ADDR_UNSET,
2295
		.radio_addr     = ADDR_UNSET,
2296
		.svhs           = UNSET,
2297 2298 2299 2300
		.gpiomask       = 0xdf,
		.muxsel         = { 2, 3, 1, 0 },
		.pll            = PLL_28,
	},
2301
	[BTTV_BOARD_IVC120] = {
2302 2303 2304 2305
		/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
		.name           = "IVC-120G",
		.video_inputs   = 16,
		.audio_inputs   = 0,    /* card has no audio */
2306 2307
		.tuner          = UNSET,   /* card has no tuner */
		.tuner_type     = UNSET,
2308
		.tuner_addr	= ADDR_UNSET,
2309
		.radio_addr     = ADDR_UNSET,
2310
		.svhs           = UNSET,   /* card has no svhs */
2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322
		.needs_tvaudio  = 0,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.gpiomask       = 0x00,
		.muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
				0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
		.muxsel_hook    = ivc120_muxsel,
		.pll            = PLL_28,
	},

		/* ---- card 0x70 ---------------------------------- */
2323
	[BTTV_BOARD_PC_HDTV] = {
2324 2325 2326 2327 2328
		.name           = "pcHDTV HD-2000 TV",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
M
 
Michael Krufky 已提交
2329
		.muxsel         = { 2, 3, 1, 0 },
2330
		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2331
		.tuner_addr	= ADDR_UNSET,
2332
		.radio_addr     = ADDR_UNSET,
2333 2334
		.has_dvb        = 1,
	},
2335
	[BTTV_BOARD_TWINHAN_DST] = {
2336 2337 2338 2339 2340 2341
		.name           = "Twinhan DST + clones",
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.tuner_type     = TUNER_ABSENT,
		.tuner_addr	= ADDR_UNSET,
2342
		.radio_addr     = ADDR_UNSET,
2343 2344 2345
		.no_video       = 1,
		.has_dvb        = 1,
	},
2346
	[BTTV_BOARD_WINFASTVC100] = {
2347 2348 2349 2350
		.name           = "Winfast VC100",
		.video_inputs   = 3,
		.audio_inputs   = 0,
		.svhs           = 1,
2351
		.tuner          = UNSET,
M
 
Michael Krufky 已提交
2352
		.muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2353 2354 2355 2356 2357
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.tuner_type     = TUNER_ABSENT,
		.tuner_addr	= ADDR_UNSET,
2358
		.radio_addr     = ADDR_UNSET,
2359 2360
		.pll            = PLL_28,
	},
2361
	[BTTV_BOARD_TEV560] = {
2362 2363 2364 2365 2366 2367
		.name           = "Teppro TEV-560/InterVision IV-560",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 3,
M
 
Michael Krufky 已提交
2368
		.muxsel         = { 2, 3, 1, 1 },
2369
		.gpiomux        = { 1, 1, 1, 1 },
2370 2371 2372
		.needs_tvaudio  = 1,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2373
		.radio_addr     = ADDR_UNSET,
2374 2375 2376 2377
		.pll            = PLL_35,
	},

		/* ---- card 0x74 ---------------------------------- */
2378
	[BTTV_BOARD_SIMUS_GVC1100] = {
2379 2380 2381
		.name           = "SIMUS GVC1100",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2382 2383 2384
		.tuner          = UNSET,
		.svhs           = UNSET,
		.tuner_type     = UNSET,
2385
		.tuner_addr	= ADDR_UNSET,
2386
		.radio_addr     = ADDR_UNSET,
2387
		.pll            = PLL_28,
M
 
Michael Krufky 已提交
2388
		.muxsel         = { 2, 2, 2, 2 },
2389 2390 2391
		.gpiomask       = 0x3F,
		.muxsel_hook    = gvc1100_muxsel,
	},
2392
	[BTTV_BOARD_NGSTV_PLUS] = {
2393 2394 2395 2396 2397 2398
		/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
		.name           = "NGS NGSTV+",
		.video_inputs   = 3,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x008007,
M
 
Michael Krufky 已提交
2399
		.muxsel         = { 2, 3, 0, 0 },
2400 2401
		.gpiomux        = { 0, 0, 0, 0 },
		.gpiomute 	= 0x000003,
2402 2403 2404
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2405
		.radio_addr     = ADDR_UNSET,
2406 2407
		.has_remote     = 1,
	},
2408
	[BTTV_BOARD_LMLBT4] = {
2409 2410 2411 2412
		/* http://linuxmedialabs.com */
		.name           = "LMLBT4",
		.video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
		.audio_inputs   = 0,
2413 2414
		.tuner          = UNSET,
		.svhs           = UNSET,
2415 2416 2417 2418 2419
		.muxsel         = { 2, 3, 1, 0 },
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.needs_tvaudio  = 0,
2420
		.tuner_type     = UNSET,
2421
		.tuner_addr	= ADDR_UNSET,
2422
		.radio_addr     = ADDR_UNSET,
2423
	},
2424
	[BTTV_BOARD_TEKRAM_M205] = {
2425 2426 2427 2428 2429 2430 2431
		/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
		.name           = "Tekram M205 PRO",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2432
		.radio_addr     = ADDR_UNSET,
2433 2434 2435
		.svhs           = 2,
		.needs_tvaudio  = 0,
		.gpiomask       = 0x68,
M
 
Michael Krufky 已提交
2436
		.muxsel         = { 2, 3, 1 },
2437
		.gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2438 2439 2440 2441
		.pll            = PLL_28,
	},

		/* ---- card 0x78 ---------------------------------- */
2442
	[BTTV_BOARD_CONTVFMI] = {
2443 2444 2445 2446 2447 2448 2449 2450 2451
		/* Javier Cendan Ares <jcendan@lycos.es> */
		/* bt878 TV + FM without subsystem ID */
		.name           = "Conceptronic CONTVFMi",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x008007,
		.muxsel         = { 2, 3, 1, 1 },
2452 2453
		.gpiomux        = { 0, 1, 2, 2 },
		.gpiomute 	= 3,
2454 2455 2456 2457
		.needs_tvaudio  = 0,
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2458
		.radio_addr     = ADDR_UNSET,
2459 2460 2461
		.has_remote     = 1,
		.has_radio      = 1,
	},
2462
	[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2463 2464
		/*Eric DEBIEF <debief@telemsa.com>*/
		/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2465
		/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2466 2467 2468 2469
		/*0x79 in bttv.h*/
		.name           = "Euresys Picolo Tetra",
		.video_inputs   = 4,
		.audio_inputs   = 0,
2470 2471
		.tuner          = UNSET,
		.svhs           = UNSET,
2472 2473 2474 2475 2476 2477
		.gpiomask       = 0,
		.gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2478
		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2479 2480 2481
		.pll            = PLL_28,
		.needs_tvaudio  = 0,
		.muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2482
		.tuner_type     = UNSET,
2483
		.tuner_addr	= ADDR_UNSET,
2484
		.radio_addr     = ADDR_UNSET,
2485
	},
2486
	[BTTV_BOARD_SPIRIT_TV] = {
2487 2488 2489 2490 2491 2492 2493 2494 2495
		/* Spirit TV Tuner from http://spiritmodems.com.au */
		/* Stafford Goodsell <surge@goliath.homeunix.org> */
		.name           = "Spirit TV Tuner",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x0000000f,
		.muxsel         = { 2, 1, 1 },
2496
		.gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2497 2498
		.tuner_type     = TUNER_TEMIC_PAL,
		.tuner_addr	= ADDR_UNSET,
2499
		.radio_addr     = ADDR_UNSET,
2500 2501 2502
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
	},
2503
	[BTTV_BOARD_AVDVBT_771] = {
2504 2505 2506 2507
		/* Wolfram Joost <wojo@frokaschwei.de> */
		.name           = "AVerMedia AVerTV DVB-T 771",
		.video_inputs   = 2,
		.svhs           = 1,
2508
		.tuner          = UNSET,
2509 2510
		.tuner_type     = TUNER_ABSENT,
		.tuner_addr	= ADDR_UNSET,
2511
		.radio_addr     = ADDR_UNSET,
2512 2513 2514 2515 2516 2517 2518 2519 2520 2521
		.muxsel         = { 3 , 3 },
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll            = PLL_28,
		.has_dvb        = 1,
		.no_gpioirq     = 1,
		.has_remote     = 1,
	},
		/* ---- card 0x7c ---------------------------------- */
2522
	[BTTV_BOARD_AVDVBT_761] = {
2523
		/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2524
		/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2525 2526
		.name           = "AverMedia AverTV DVB-T 761",
		.video_inputs   = 2,
2527
		.tuner          = UNSET,
2528
		.svhs           = 1,
M
 
Michael Krufky 已提交
2529
		.muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2530 2531 2532 2533
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll            = PLL_28,
2534
		.tuner_type     = UNSET,
2535
		.tuner_addr	= ADDR_UNSET,
2536
		.radio_addr     = ADDR_UNSET,
2537 2538 2539 2540
		.has_dvb        = 1,
		.no_gpioirq     = 1,
		.has_remote     = 1,
	},
2541
	[BTTV_BOARD_MATRIX_VISIONSQ] = {
2542 2543 2544 2545
		/* andre.schwarz@matrix-vision.de */
		.name             = "MATRIX Vision Sigma-SQ",
		.video_inputs     = 16,
		.audio_inputs     = 0,
2546 2547
		.tuner            = UNSET,
		.svhs             = UNSET,
2548 2549 2550 2551
		.gpiomask         = 0x0,
		.muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
				3, 3, 3, 3, 3, 3, 3, 3 },
		.muxsel_hook      = sigmaSQ_muxsel,
2552
		.gpiomux          = { 0 },
2553 2554
		.no_msp34xx       = 1,
		.pll              = PLL_28,
2555
		.tuner_type       = UNSET,
2556
		.tuner_addr	  = ADDR_UNSET,
2557
		.radio_addr     = ADDR_UNSET,
2558
	},
2559
	[BTTV_BOARD_MATRIX_VISIONSLC] = {
2560 2561 2562 2563
		/* andre.schwarz@matrix-vision.de */
		.name             = "MATRIX Vision Sigma-SLC",
		.video_inputs     = 4,
		.audio_inputs     = 0,
2564 2565
		.tuner            = UNSET,
		.svhs             = UNSET,
2566 2567 2568
		.gpiomask         = 0x0,
		.muxsel           = { 2, 2, 2, 2 },
		.muxsel_hook      = sigmaSLC_muxsel,
2569
		.gpiomux          = { 0 },
2570 2571
		.no_msp34xx       = 1,
		.pll              = PLL_28,
2572
		.tuner_type       = UNSET,
2573
		.tuner_addr	  = ADDR_UNSET,
2574
		.radio_addr     = ADDR_UNSET,
2575
	},
2576 2577
		/* BTTV_BOARD_APAC_VIEWCOMP */
	[BTTV_BOARD_APAC_VIEWCOMP] = {
2578 2579 2580 2581 2582 2583
		/* Attila Kondoros <attila.kondoros@chello.hu> */
		/* bt878 TV + FM 0x00000000 subsystem ID */
		.name           = "APAC Viewcomp 878(AMAX)",
		.video_inputs   = 2,
		.audio_inputs   = 1,
		.tuner          = 0,
2584
		.svhs           = UNSET,
2585
		.gpiomask       = 0xFF,
M
 
Michael Krufky 已提交
2586
		.muxsel         = { 2, 3, 1, 1 },
2587 2588
		.gpiomux        = { 2, 0, 0, 0 },
		.gpiomute 	= 10,
2589 2590 2591 2592
		.needs_tvaudio  = 0,
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_PAL,
		.tuner_addr	= ADDR_UNSET,
2593
		.radio_addr     = ADDR_UNSET,
2594 2595 2596 2597 2598
		.has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
		.has_radio      = 1,   /* not every card has radio */
	},

		/* ---- card 0x80 ---------------------------------- */
2599
	[BTTV_BOARD_DVICO_DVBT_LITE] = {
2600 2601
		/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
		.name           = "DViCO FusionHDTV DVB-T Lite",
2602
		.tuner          = UNSET,
2603 2604 2605 2606 2607 2608
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll            = PLL_28,
		.no_video       = 1,
		.has_dvb        = 1,
2609
		.tuner_type     = UNSET,
2610
		.tuner_addr	= ADDR_UNSET,
2611
		.radio_addr     = ADDR_UNSET,
2612
	},
2613
	[BTTV_BOARD_VGEAR_MYVCD] = {
2614 2615 2616 2617 2618 2619 2620
		/* Steven <photon38@pchome.com.tw> */
		.name           = "V-Gear MyVCD",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x3f,
M
 
Michael Krufky 已提交
2621
		.muxsel         = {2, 3, 1, 0 },
2622 2623
		.gpiomux        = {0x31, 0x31, 0x31, 0x31 },
		.gpiomute 	= 0x31,
2624 2625 2626 2627
		.no_msp34xx     = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_NTSC_M,
		.tuner_addr	= ADDR_UNSET,
2628
		.radio_addr     = ADDR_UNSET,
2629 2630
		.has_radio      = 0,
	},
2631
	[BTTV_BOARD_SUPER_TV] = {
2632 2633 2634 2635 2636 2637
		/* Rick C <cryptdragoon@gmail.com> */
		.name           = "Super TV Tuner",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
M
 
Michael Krufky 已提交
2638
		.muxsel         = { 2, 3, 1, 0 },
2639 2640
		.tuner_type     = TUNER_PHILIPS_NTSC,
		.tuner_addr	= ADDR_UNSET,
2641
		.radio_addr     = ADDR_UNSET,
2642
		.gpiomask       = 0x008007,
2643
		.gpiomux        = { 0, 0x000001,0,0 },
2644 2645 2646
		.needs_tvaudio  = 1,
		.has_radio      = 1,
	},
2647
	[BTTV_BOARD_TIBET_CS16] = {
2648 2649 2650 2651
		/* Chris Fanning <video4linux@haydon.net> */
		.name           = "Tibet Systems 'Progress DVR' CS16",
		.video_inputs   = 16,
		.audio_inputs   = 0,
2652 2653
		.tuner          = UNSET,
		.svhs           = UNSET,
2654 2655 2656 2657 2658
		.muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
		.pll		= PLL_28,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432	= 1,
2659
		.tuner_type     = UNSET,
2660
		.tuner_addr	= ADDR_UNSET,
2661
		.radio_addr     = ADDR_UNSET,
2662 2663
		.muxsel_hook    = tibetCS16_muxsel,
	},
2664
	[BTTV_BOARD_KODICOM_4400R] = {
2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678
		/* Bill Brack <wbrack@mmm.com.hk> */
		/*
		* Note that, because of the card's wiring, the "master"
		* BT878A chip (i.e. the one which controls the analog switch
		* and must use this card type) is the 2nd one detected.  The
		* other 3 chips should use card type 0x85, whose description
		* follows this one.  There is a EEPROM on the card (which is
		* connected to the I2C of one of those other chips), but is
		* not currently handled.  There is also a facility for a
		* "monitor", which is also not currently implemented.
		*/
		.name           = "Kodicom 4400R (master)",
		.video_inputs	= 16,
		.audio_inputs	= 0,
2679 2680
		.tuner		= UNSET,
		.tuner_type	= UNSET,
2681
		.tuner_addr	= ADDR_UNSET,
2682
		.radio_addr     = ADDR_UNSET,
2683
		.svhs		= UNSET,
2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700
		/* GPIO bits 0-9 used for analog switch:
		*   00 - 03:	camera selector
		*   04 - 06:	channel (controller) selector
		*   07:	data (1->on, 0->off)
		*   08:	strobe
		*   09:	reset
		* bit 16 is input from sync separator for the channel
		*/
		.gpiomask	= 0x0003ff,
		.no_gpioirq     = 1,
		.muxsel		= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
		.pll		= PLL_28,
		.no_msp34xx	= 1,
		.no_tda7432	= 1,
		.no_tda9875	= 1,
		.muxsel_hook	= kodicom4400r_muxsel,
	},
2701
	[BTTV_BOARD_KODICOM_4400R_SL] = {
2702 2703 2704 2705 2706 2707 2708 2709 2710
		/* Bill Brack <wbrack@mmm.com.hk> */
		/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
		* one which controls the analog switch, and must use the card type)
		* is the 2nd one detected.  The other 3 chips should use this card
		* type
		*/
		.name		= "Kodicom 4400R (slave)",
		.video_inputs	= 16,
		.audio_inputs	= 0,
2711 2712
		.tuner		= UNSET,
		.tuner_type	= UNSET,
2713
		.tuner_addr	= ADDR_UNSET,
2714
		.radio_addr     = ADDR_UNSET,
2715
		.svhs		= UNSET,
2716 2717 2718 2719 2720 2721 2722 2723 2724 2725
		.gpiomask	= 0x010000,
		.no_gpioirq     = 1,
		.muxsel		= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
		.pll		= PLL_28,
		.no_msp34xx	= 1,
		.no_tda7432	= 1,
		.no_tda9875	= 1,
		.muxsel_hook	= kodicom4400r_muxsel,
	},
		/* ---- card 0x86---------------------------------- */
2726
	[BTTV_BOARD_ADLINK_RTV24] = {
2727 2728 2729 2730 2731 2732 2733
		/* Michael Henson <mhenson@clarityvi.com> */
		/* Adlink RTV24 with special unlock codes */
		.name           = "Adlink RTV24",
		.video_inputs   = 4,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
M
 
Michael Krufky 已提交
2734
		.muxsel         = { 2, 3, 1, 0 },
2735
		.tuner_type     = UNSET,
2736
		.tuner_addr	= ADDR_UNSET,
2737
		.radio_addr     = ADDR_UNSET,
2738 2739 2740
		.pll            = PLL_28,
	},
		/* ---- card 0x87---------------------------------- */
2741
	[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2742 2743 2744
		/* Michael Krufky <mkrufky@m1k.net> */
		.name           = "DViCO FusionHDTV 5 Lite",
		.tuner          = 0,
2745
		.tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2746
		.tuner_addr	= ADDR_UNSET,
2747
		.radio_addr     = ADDR_UNSET,
2748
		.video_inputs   = 3,
2749 2750
		.audio_inputs   = 1,
		.svhs           = 2,
2751
		.muxsel		= { 2, 3, 1 },
2752
		.gpiomask       = 0x00e00007,
2753 2754
		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
		.gpiomute 	= 0x00c00007,
2755 2756 2757 2758 2759 2760
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.has_dvb        = 1,
	},
		/* ---- card 0x88---------------------------------- */
2761
	[BTTV_BOARD_ACORP_Y878F] = {
2762
		/* Mauro Carvalho Chehab <mchehab@infradead.org> */
2763 2764 2765 2766 2767 2768
		.name		= "Acorp Y878F",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x01fe00,
M
 
Michael Krufky 已提交
2769
		.muxsel		= { 2, 3, 1, 1 },
2770 2771
		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
		.gpiomute 	= 0x002000,
2772 2773 2774 2775
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_YMEC_TVF66T5_B_DFF,
		.tuner_addr	= 0xc1 >>1,
2776
		.radio_addr     = 0xc1 >>1,
2777 2778 2779
		.has_radio	= 1,
	},
		/* ---- card 0x89 ---------------------------------- */
2780
	[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2781 2782 2783 2784 2785 2786 2787
		.name           = "Conceptronic CTVFMi v2",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x001c0007,
		.muxsel         = { 2, 3, 1, 1 },
2788 2789
		.gpiomux        = { 0, 1, 2, 2 },
		.gpiomute 	= 3,
2790 2791
		.needs_tvaudio  = 0,
		.pll            = PLL_28,
2792
		.tuner_type     = TUNER_TENA_9533_DI,
2793
		.tuner_addr	= ADDR_UNSET,
2794
		.radio_addr     = ADDR_UNSET,
2795 2796 2797
		.has_remote     = 1,
		.has_radio      = 1,
	},
2798
		/* ---- card 0x8a ---------------------------------- */
2799
	[BTTV_BOARD_PV_BT878P_2E] = {
2800 2801 2802 2803 2804 2805 2806 2807
		.name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
		.video_inputs  = 5,
		.audio_inputs  = 1,
		.tuner         = 0,
		.svhs          = 3,
		.gpiomask      = 0x01fe00,
		.muxsel        = { 2,3,1,1,-1 },
		.digital_mode  = DIGITAL_MODE_CAMERA,
2808 2809
		.gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
		.gpiomute      = 0x12400,
2810 2811 2812 2813 2814 2815 2816 2817 2818
		.no_msp34xx    = 1,
		.pll           = PLL_28,
		.tuner_type    = TUNER_LG_PAL_FM,
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.has_remote    = 1,
	},
		/* ---- card 0x8b ---------------------------------- */
	[BTTV_BOARD_PV_M4900] = {
2819
		/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2820 2821 2822 2823 2824 2825 2826
		.name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x3f,
		.muxsel         = { 2, 3, 1, 1 },
2827 2828
		.gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
		.gpiomute 	= 0x29,
2829 2830 2831 2832 2833 2834 2835
		.no_msp34xx     = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_YMEC_TVF_5533MF,
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.has_radio      = 1,
		.has_remote     = 1,
2836
	},
2837
		/* ---- card 0x8c ---------------------------------- */
2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849
	/* Has four Bt878 chips behind a PCI bridge, each chip has:
	     one external BNC composite input (mux 2)
	     three internal composite inputs (unknown muxes)
	     an 18-bit stereo A/D (CS5331A), which has:
	       one external stereo unblanced (RCA) audio connection
	       one (or 3?) internal stereo balanced (XLR) audio connection
	       input is selected via gpio to a 14052B mux
		 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
	       gain is controlled via an X9221A chip on the I2C bus @0x28
	       sample rate is controlled via gpio to an MK1413S
		 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
	     There is neither a tuner nor an svideo input. */
2850 2851
	[BTTV_BOARD_OSPREY440]  = {
		.name           = "Osprey 440",
2852 2853
		.video_inputs   = 4,
		.audio_inputs   = 2, /* this is meaningless */
2854
		.tuner          = UNSET,
2855 2856 2857 2858 2859
		.svhs           = UNSET,
		.muxsel         = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
		.gpiomask	= 0x303,
		.gpiomute	= 0x000, /* int + 32kHz */
		.gpiomux	= { 0, 0, 0x000, 0x100},
2860 2861 2862 2863 2864 2865 2866 2867
		.pll            = PLL_28,
		.tuner_type     = UNSET,
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
2868 2869 2870 2871 2872 2873 2874 2875
		/* ---- card 0x8d ---------------------------------- */
	[BTTV_BOARD_ASOUND_SKYEYE] = {
		.name		= "Asound Skyeye PCTV",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 15,
M
 
Michael Krufky 已提交
2876
		.muxsel		= { 2, 3, 1, 1 },
2877 2878
		.gpiomux 	= { 2, 0, 0, 0 },
		.gpiomute 	= 1,
2879 2880
		.needs_tvaudio	= 1,
		.pll		= PLL_28,
2881
		.tuner_type	= TUNER_PHILIPS_NTSC,
2882 2883 2884
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
	},
2885 2886 2887 2888 2889 2890 2891 2892
		/* ---- card 0x8e ---------------------------------- */
	[BTTV_BOARD_SABRENT_TVFM] = {
		.name		= "Sabrent TV-FM (bttv version)",
		.video_inputs	= 3,
		.audio_inputs	= 1,
		.tuner		= 0,
		.svhs		= 2,
		.gpiomask	= 0x108007,
M
 
Michael Krufky 已提交
2893
		.muxsel		= { 2, 3, 1, 1 },
2894
		.gpiomux 	= { 100000, 100002, 100002, 100000 },
2895 2896 2897 2898 2899 2900 2901 2902
		.no_msp34xx	= 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
		.pll		= PLL_28,
		.tuner_type	= TUNER_TNF_5335MF,
		.tuner_addr	= ADDR_UNSET,
		.has_radio      = 1,
	},
2903 2904 2905 2906 2907
	/* ---- card 0x8f ---------------------------------- */
	[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
		.name		= "Hauppauge ImpactVCB (bt878)",
		.video_inputs	= 4,
		.audio_inputs	= 0,
2908 2909
		.tuner		= UNSET,
		.svhs		= UNSET,
2910
		.gpiomask	= 0x0f, /* old: 7 */
M
 
Michael Krufky 已提交
2911
		.muxsel		= { 0, 1, 3, 2 }, /* Composite 0-3 */
2912 2913 2914
		.no_msp34xx	= 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
2915
		.tuner_type	= UNSET,
2916 2917 2918
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
	},
J
 
Julian Calaby 已提交
2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933
	[BTTV_BOARD_MACHTV_MAGICTV] = {
		/* Julian Calaby <julian.calaby@gmail.com>
		 * Slightly different from original MachTV definition (0x60)

		 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
		 * stuffs up remote chip. Bug is a pin on the jaecs is not set
		 * properly (methinks) causing no keyup bits being set */

		.name           = "MagicTV", /* rebranded MachTV */
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 7,
		.muxsel         = { 2, 3, 1, 1 },
2934 2935
		.gpiomux        = { 0, 1, 2, 3 },
		.gpiomute 	= 4,
J
 
Julian Calaby 已提交
2936 2937 2938 2939 2940 2941 2942
		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.pll            = PLL_28,
		.has_radio      = 1,
		.has_remote     = 1,
	},
2943 2944 2945 2946
	[BTTV_BOARD_SSAI_SECURITY] = {
		.name		= "SSAI Security Video Interface",
		.video_inputs	= 4,
		.audio_inputs	= 0,
2947 2948
		.tuner		= UNSET,
		.svhs		= UNSET,
2949
		.muxsel		= { 0, 1, 2, 3 },
2950
		.tuner_type	= UNSET,
2951 2952 2953 2954 2955 2956 2957
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
	},
	[BTTV_BOARD_SSAI_ULTRASOUND] = {
		.name		= "SSAI Ultrasound Video Interface",
		.video_inputs	= 2,
		.audio_inputs	= 0,
2958
		.tuner		= UNSET,
2959 2960
		.svhs		= 1,
		.muxsel		= { 2, 0, 1, 3 },
2961
		.tuner_type	= UNSET,
2962 2963 2964
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
	},
2965 2966 2967 2968
	/* ---- card 0x94---------------------------------- */
	[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
		.name           = "DViCO FusionHDTV 2",
		.tuner          = 0,
2969
		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982
		.tuner_addr	= ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.svhs           = 2,
		.muxsel		= { 2, 3, 1 },
		.gpiomask       = 0x00e00007,
		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
		.gpiomute 	= 0x00c00007,
		.no_msp34xx     = 1,
		.no_tda9875     = 1,
		.no_tda7432     = 1,
	},
2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999
	/* ---- card 0x95---------------------------------- */
	[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
		.name           = "Typhoon TV-Tuner PCI (50684)",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x3014f,
		.muxsel         = { 2, 3, 1, 1 },
		.gpiomux        = { 0x20001,0x10001, 0, 0 },
		.gpiomute       = 10,
		.needs_tvaudio  = 1,
		.pll            = PLL_28,
		.tuner_type     = TUNER_PHILIPS_PAL_I,
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
	},
3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017
	[BTTV_BOARD_GEOVISION_GV600] = {
		/* emhn@usb.ve */
		.name             = "Geovision GV-600",
		.video_inputs     = 16,
		.audio_inputs     = 0,
		.tuner            = UNSET,
		.svhs             = UNSET,
		.gpiomask         = 0x0,
		.muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
				      2, 2, 2, 2, 2, 2, 2, 2 },
		.muxsel_hook      = geovision_muxsel,
		.gpiomux          = { 0 },
		.no_msp34xx       = 1,
		.pll              = PLL_28,
		.tuner_type       = UNSET,
		.tuner_addr	  = ADDR_UNSET,
		.radio_addr       = ADDR_UNSET,
	},
3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038
	[BTTV_BOARD_KOZUMI_KTV_01C] = {
		/* Mauro Lacy <mauro@lacy.com.ar>
		 * Based on MagicTV and Conceptronic CONTVFMi */

		.name           = "Kozumi KTV-01C",
		.video_inputs   = 3,
		.audio_inputs   = 1,
		.tuner          = 0,
		.svhs           = 2,
		.gpiomask       = 0x008007,
		.muxsel         = { 2, 3, 1, 1 },
		.gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
		.gpiomute 	= 3, /* CONTVFMi */
		.needs_tvaudio  = 0,
		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
		.tuner_addr     = ADDR_UNSET,
		.radio_addr     = ADDR_UNSET,
		.pll            = PLL_28,
		.has_radio      = 1,
		.has_remote     = 1,
	},
3039
};
L
Linus Torvalds 已提交
3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081

static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);

/* ----------------------------------------------------------------------- */

static unsigned char eeprom_data[256];

/*
 * identify card
 */
void __devinit bttv_idcard(struct bttv *btv)
{
	unsigned int gpiobits;
	int i,type;
	unsigned short tmp;

	/* read PCI subsystem ID */
	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
	btv->cardid = tmp << 16;
	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
	btv->cardid |= tmp;

	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
		/* look for the card */
		for (type = -1, i = 0; cards[i].id != 0; i++)
			if (cards[i].id  == btv->cardid)
				type = i;

		if (type != -1) {
			/* found it */
			printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
			       "PCI subsystem ID is %04x:%04x\n",
			       btv->c.nr,cards[type].name,cards[type].cardnr,
			       btv->cardid & 0xffff,
			       (btv->cardid >> 16) & 0xffff);
			btv->c.type = cards[type].cardnr;
		} else {
			/* 404 */
			printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
			       btv->c.nr, btv->cardid & 0xffff,
			       (btv->cardid >> 16) & 0xffff);
			printk(KERN_DEBUG "please mail id, board name and "
3082
			       "the correct card= insmod option to video4linux-list@redhat.com\n");
L
Linus Torvalds 已提交
3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101
		}
	}

	/* let the user override the autodetected type */
	if (card[btv->c.nr] < bttv_num_tvcards)
		btv->c.type=card[btv->c.nr];

	/* print which card config we are using */
	printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
	       bttv_tvcards[btv->c.type].name, btv->c.type,
	       card[btv->c.nr] < bttv_num_tvcards
	       ? "insmod option" : "autodetected");

	/* overwrite gpio stuff ?? */
	if (UNSET == audioall && UNSET == audiomux[0])
		return;

	if (UNSET != audiomux[0]) {
		gpiobits = 0;
3102
		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3103
			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
L
Linus Torvalds 已提交
3104 3105 3106 3107
			gpiobits |= audiomux[i];
		}
	} else {
		gpiobits = audioall;
3108
		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3109
			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
L
Linus Torvalds 已提交
3110 3111 3112 3113 3114
		}
	}
	bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
	printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
	       btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3115
	for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3116
		printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
L
Linus Torvalds 已提交
3117 3118 3119 3120 3121 3122 3123 3124 3125
	}
	printk("\n");
}

/*
 * (most) board specific initialisations goes here
 */

/* Some Modular Technology cards have an eeprom, but no subsystem ID */
3126
static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
L
Linus Torvalds 已提交
3127 3128 3129 3130
{
	int type = -1;

	if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3131
		type = BTTV_BOARD_MODTEC_205;
L
Linus Torvalds 已提交
3132
	else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3133
		type = BTTV_BOARD_EURESYS_PICOLO;
L
Linus Torvalds 已提交
3134
	else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3135
		type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
L
Linus Torvalds 已提交
3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146

	if (-1 != type) {
		btv->c.type = type;
		printk("bttv%d: detected by eeprom: %s [card=%d]\n",
		       btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
	}
}

static void flyvideo_gpio(struct bttv *btv)
{
	int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3147
	int tuner=UNSET,ttype;
L
Linus Torvalds 已提交
3148 3149

	gpio_inout(0xffffff, 0);
3150
	udelay(8);  /* without this we would see the 0x1800 mask */
L
Linus Torvalds 已提交
3151 3152 3153
	gpio = gpio_read();
	/* FIXME: must restore OUR_EN ??? */

3154 3155 3156 3157 3158
	/* all cards provide GPIO info, some have an additional eeprom
	 * LR50: GPIO coding can be found lower right CP1 .. CP9
	 *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
	 *       GPIO14-12: n.c.
	 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
L
Linus Torvalds 已提交
3159

3160 3161 3162 3163 3164
	 * lowest 3 bytes are remote control codes (no handshake needed)
	 * xxxFFF: No remote control chip soldered
	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
	 * Note: Some bits are Audio_Mask !
	 */
L
Linus Torvalds 已提交
3165 3166
	ttype=(gpio&0x0f0000)>>16;
	switch(ttype) {
3167
	case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
L
Linus Torvalds 已提交
3168
		break;
3169
	case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
L
Linus Torvalds 已提交
3170
		break;
3171
	case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
L
Linus Torvalds 已提交
3172
		break;
3173
	case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
L
Linus Torvalds 已提交
3174
		break;
3175
		case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
L
Linus Torvalds 已提交
3176 3177 3178 3179 3180 3181 3182
		break;
	default:
		printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
	}

	has_remote          =   gpio & 0x800000;
	has_radio	    =   gpio & 0x400000;
3183 3184
	/*   unknown                   0x200000;
	 *   unknown2                  0x100000; */
3185
	is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
L
Linus Torvalds 已提交
3186
	has_tda9820_tda9821 = !(gpio & 0x004000);
3187 3188 3189
	is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
	/*
	 * gpio & 0x001000    output bit for audio routing */
L
Linus Torvalds 已提交
3190 3191

	if(is_capture_only)
3192
		tuner = TUNER_ABSENT; /* No tuner present */
L
Linus Torvalds 已提交
3193 3194 3195 3196 3197 3198 3199

	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
	       btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
	printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
		btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
		is_capture_only?"yes":"no ");

3200
	if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
L
Linus Torvalds 已提交
3201 3202 3203
		btv->tuner_type = tuner;
	btv->has_radio = has_radio;

3204 3205 3206
	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3207 3208
	if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
	/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
L
Linus Torvalds 已提交
3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221
}

static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
			       14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
			       1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };

static void miro_pinnacle_gpio(struct bttv *btv)
{
	int id,msp,gpio;
	char *info;

	gpio_inout(0xffffff, 0);
3222
	gpio = gpio_read();
L
Linus Torvalds 已提交
3223
	id   = ((gpio>>10) & 63) -1;
3224
	msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
L
Linus Torvalds 已提交
3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240
	if (id < 32) {
		btv->tuner_type = miro_tunermap[id];
		if (0 == (gpio & 0x20)) {
			btv->has_radio = 1;
			if (!miro_fmtuner[id]) {
				btv->has_matchbox = 1;
				btv->mbox_we    = (1<<6);
				btv->mbox_most  = (1<<7);
				btv->mbox_clk   = (1<<8);
				btv->mbox_data  = (1<<9);
				btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
			}
		} else {
			btv->has_radio = 0;
		}
		if (-1 != msp) {
3241 3242 3243 3244
			if (btv->c.type == BTTV_BOARD_MIRO)
				btv->c.type = BTTV_BOARD_MIROPRO;
			if (btv->c.type == BTTV_BOARD_PINNACLE)
				btv->c.type = BTTV_BOARD_PINNACLEPRO;
L
Linus Torvalds 已提交
3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258
		}
		printk(KERN_INFO
		       "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
		       btv->c.nr, id+1, btv->tuner_type,
		       !btv->has_radio ? "no" :
		       (btv->has_matchbox ? "matchbox" : "fmtuner"),
		       (-1 == msp) ? "no" : "yes");
	} else {
		/* new cards with microtune tuner */
		id = 63 - id;
		btv->has_radio = 0;
		switch (id) {
		case 1:
			info = "PAL / mono";
3259
			btv->tda9887_conf = TDA9887_INTERCARRIER;
L
Linus Torvalds 已提交
3260 3261 3262 3263
			break;
		case 2:
			info = "PAL+SECAM / stereo";
			btv->has_radio = 1;
3264
			btv->tda9887_conf = TDA9887_QSS;
L
Linus Torvalds 已提交
3265 3266 3267 3268
			break;
		case 3:
			info = "NTSC / stereo";
			btv->has_radio = 1;
3269
			btv->tda9887_conf = TDA9887_QSS;
L
Linus Torvalds 已提交
3270 3271 3272
			break;
		case 4:
			info = "PAL+SECAM / mono";
3273
			btv->tda9887_conf = TDA9887_QSS;
L
Linus Torvalds 已提交
3274 3275 3276
			break;
		case 5:
			info = "NTSC / mono";
3277
			btv->tda9887_conf = TDA9887_INTERCARRIER;
L
Linus Torvalds 已提交
3278 3279 3280
			break;
		case 6:
			info = "NTSC / stereo";
3281
			btv->tda9887_conf = TDA9887_INTERCARRIER;
L
Linus Torvalds 已提交
3282 3283 3284
			break;
		case 7:
			info = "PAL / stereo";
3285
			btv->tda9887_conf = TDA9887_INTERCARRIER;
L
Linus Torvalds 已提交
3286 3287 3288 3289 3290 3291
			break;
		default:
			info = "oops: unknown card";
			break;
		}
		if (-1 != msp)
3292
			btv->c.type = BTTV_BOARD_PINNACLEPRO;
L
Linus Torvalds 已提交
3293 3294 3295
		printk(KERN_INFO
		       "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
		       btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3296
		btv->tuner_type = TUNER_MT2032;
L
Linus Torvalds 已提交
3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325
	}
}

/* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
#define LM1882_SYNC_DRIVE     0x200000L

static void init_ids_eagle(struct bttv *btv)
{
	gpio_inout(0xffffff,0xFFFF37);
	gpio_write(0x200020);

	/* flash strobe inverter ?! */
	gpio_write(0x200024);

	/* switch sync drive off */
	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);

	/* set BT848 muxel to 2 */
	btaor((2)<<5, ~(2<<5), BT848_IFORM);
}

/* Muxsel helper for the IDS Eagle.
 * the eagles does not use the standard muxsel-bits but
 * has its own multiplexer */
static void eagle_muxsel(struct bttv *btv, unsigned int input)
{
	btaor((2)<<5, ~(3<<5), BT848_IFORM);
	gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);

3326 3327 3328 3329 3330 3331 3332 3333 3334
	/* composite */
	/* set chroma ADC to sleep */
	btor(BT848_ADC_C_SLEEP, BT848_ADC);
	/* set to composite video */
	btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
	btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);

	/* switch sync drive off */
	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
L
Linus Torvalds 已提交
3335 3336 3337 3338
}

static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
{
3339
	static const int masks[] = {0x30, 0x01, 0x12, 0x23};
L
Linus Torvalds 已提交
3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377
	gpio_write(masks[input%4]);
}

/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
   alarms output

   GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
   assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |

   IN - sensor inputs, INx - sensor inputs and TI XORed together
   O1,O2,O3 - alarm outputs (relays)

   OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0

*/

static void init_lmlbt4x(struct bttv *btv)
{
	printk(KERN_DEBUG "LMLBT4x init\n");
	btwrite(0x000000, BT848_GPIO_REG_INP);
	gpio_inout(0xffffff, 0x0006C0);
	gpio_write(0x000000);
}

static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
{
	unsigned int inmux = input % 8;
	gpio_inout( 0xf, 0xf );
	gpio_bits( 0xf, inmux );
}

static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
{
	unsigned int inmux = input % 4;
	gpio_inout( 3<<9, 3<<9 );
	gpio_bits( 3<<9, inmux<<9 );
}

3378 3379 3380 3381 3382 3383 3384
static void geovision_muxsel(struct bttv *btv, unsigned int input)
{
	unsigned int inmux = input % 16;
	gpio_inout(0xf, 0xf);
	gpio_bits(0xf, inmux);
}

L
Linus Torvalds 已提交
3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411
/* ----------------------------------------------------------------------- */

static void bttv_reset_audio(struct bttv *btv)
{
	/*
	 * BT878A has a audio-reset register.
	 * 1. This register is an audio reset function but it is in
	 *    function-0 (video capture) address space.
	 * 2. It is enough to do this once per power-up of the card.
	 * 3. There is a typo in the Conexant doc -- it is not at
	 *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
	 * --//Shrikumar 030609
	 */
	if (btv->id != 878)
		return;

	if (bttv_debug)
		printk("bttv%d: BT878A ARESET\n",btv->c.nr);
	btwrite((1<<7), 0x058);
	udelay(10);
	btwrite(     0, 0x058);
}

/* initialization part one -- before registering i2c bus */
void __devinit bttv_init_card1(struct bttv *btv)
{
	switch (btv->c.type) {
3412 3413
	case BTTV_BOARD_HAUPPAUGE:
	case BTTV_BOARD_HAUPPAUGE878:
3414
		boot_msp34xx(btv,5);
L
Linus Torvalds 已提交
3415
		break;
3416
	case BTTV_BOARD_VOODOOTV_200:
3417
	case BTTV_BOARD_VOODOOTV_FM:
3418
		boot_msp34xx(btv,20);
L
Linus Torvalds 已提交
3419
		break;
3420
	case BTTV_BOARD_AVERMEDIA98:
L
Linus Torvalds 已提交
3421 3422
		boot_msp34xx(btv,11);
		break;
3423
	case BTTV_BOARD_HAUPPAUGEPVR:
L
Linus Torvalds 已提交
3424 3425
		pvr_boot(btv);
		break;
3426 3427 3428
	case BTTV_BOARD_TWINHAN_DST:
	case BTTV_BOARD_AVDVBT_771:
	case BTTV_BOARD_PINNACLESAT:
L
Linus Torvalds 已提交
3429 3430
		btv->use_i2c_hw = 1;
		break;
3431
	case BTTV_BOARD_ADLINK_RTV24:
3432 3433
		init_RTV24( btv );
		break;
M
Mauro Carvalho Chehab 已提交
3434

L
Linus Torvalds 已提交
3435 3436 3437 3438 3439 3440 3441 3442
	}
	if (!bttv_tvcards[btv->c.type].has_dvb)
		bttv_reset_audio(btv);
}

/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
3443
	int addr=ADDR_UNSET;
3444

3445
	btv->tuner_type = UNSET;
L
Linus Torvalds 已提交
3446

3447
	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
L
Linus Torvalds 已提交
3448 3449 3450 3451 3452
		bttv_readee(btv,eeprom_data,0xa0);
		identify_by_eeprom(btv,eeprom_data);
	}

	switch (btv->c.type) {
3453 3454 3455 3456
	case BTTV_BOARD_MIRO:
	case BTTV_BOARD_MIROPRO:
	case BTTV_BOARD_PINNACLE:
	case BTTV_BOARD_PINNACLEPRO:
L
Linus Torvalds 已提交
3457 3458 3459
		/* miro/pinnacle */
		miro_pinnacle_gpio(btv);
		break;
3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470
	case BTTV_BOARD_FLYVIDEO_98:
	case BTTV_BOARD_MAXI:
	case BTTV_BOARD_LIFE_FLYKIT:
	case BTTV_BOARD_FLYVIDEO:
	case BTTV_BOARD_TYPHOON_TVIEW:
	case BTTV_BOARD_CHRONOS_VS2:
	case BTTV_BOARD_FLYVIDEO_98FM:
	case BTTV_BOARD_FLYVIDEO2000:
	case BTTV_BOARD_FLYVIDEO98EZ:
	case BTTV_BOARD_CONFERENCETV:
	case BTTV_BOARD_LIFETEC_9415:
L
Linus Torvalds 已提交
3471 3472
		flyvideo_gpio(btv);
		break;
3473 3474 3475
	case BTTV_BOARD_HAUPPAUGE:
	case BTTV_BOARD_HAUPPAUGE878:
	case BTTV_BOARD_HAUPPAUGEPVR:
L
Linus Torvalds 已提交
3476 3477
		/* pick up some config infos from the eeprom */
		bttv_readee(btv,eeprom_data,0xa0);
3478
		hauppauge_eeprom(btv);
L
Linus Torvalds 已提交
3479
		break;
3480 3481
	case BTTV_BOARD_AVERMEDIA98:
	case BTTV_BOARD_AVPHONE98:
L
Linus Torvalds 已提交
3482 3483 3484
		bttv_readee(btv,eeprom_data,0xa0);
		avermedia_eeprom(btv);
		break;
3485
	case BTTV_BOARD_PXC200:
L
Linus Torvalds 已提交
3486 3487
		init_PXC200(btv);
		break;
3488
	case BTTV_BOARD_PICOLO_TETRA_CHIP:
L
Linus Torvalds 已提交
3489 3490
		picolo_tetra_init(btv);
		break;
3491
	case BTTV_BOARD_VHX:
L
Linus Torvalds 已提交
3492 3493 3494 3495 3496 3497 3498 3499
		btv->has_radio    = 1;
		btv->has_matchbox = 1;
		btv->mbox_we      = 0x20;
		btv->mbox_most    = 0;
		btv->mbox_clk     = 0x08;
		btv->mbox_data    = 0x10;
		btv->mbox_mask    = 0x38;
		break;
3500 3501
	case BTTV_BOARD_VOBIS_BOOSTAR:
	case BTTV_BOARD_TERRATV:
L
Linus Torvalds 已提交
3502 3503
		terratec_active_radio_upgrade(btv);
		break;
3504
	case BTTV_BOARD_MAGICTVIEW061:
L
Linus Torvalds 已提交
3505 3506 3507 3508 3509
		if (btv->cardid == 0x3002144f) {
			btv->has_radio=1;
			printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
		}
		break;
3510
	case BTTV_BOARD_STB2:
3511
		if (btv->cardid == 0x3060121a) {
L
Linus Torvalds 已提交
3512 3513 3514 3515 3516 3517
			/* Fix up entry for 3DFX VoodooTV 100,
			   which is an OEM STB card variant. */
			btv->has_radio=0;
			btv->tuner_type=TUNER_TEMIC_NTSC;
		}
		break;
3518 3519 3520 3521 3522 3523 3524 3525
	case BTTV_BOARD_OSPREY1x0:
	case BTTV_BOARD_OSPREY1x0_848:
	case BTTV_BOARD_OSPREY101_848:
	case BTTV_BOARD_OSPREY1x1:
	case BTTV_BOARD_OSPREY1x1_SVID:
	case BTTV_BOARD_OSPREY2xx:
	case BTTV_BOARD_OSPREY2x0_SVID:
	case BTTV_BOARD_OSPREY2x0:
3526
	case BTTV_BOARD_OSPREY440:
3527 3528 3529
	case BTTV_BOARD_OSPREY500:
	case BTTV_BOARD_OSPREY540:
	case BTTV_BOARD_OSPREY2000:
L
Linus Torvalds 已提交
3530
		bttv_readee(btv,eeprom_data,0xa0);
3531
		osprey_eeprom(btv, eeprom_data);
L
Linus Torvalds 已提交
3532
		break;
3533
	case BTTV_BOARD_IDS_EAGLE:
L
Linus Torvalds 已提交
3534 3535
		init_ids_eagle(btv);
		break;
3536
	case BTTV_BOARD_MODTEC_205:
L
Linus Torvalds 已提交
3537 3538 3539
		bttv_readee(btv,eeprom_data,0xa0);
		modtec_eeprom(btv);
		break;
3540
	case BTTV_BOARD_LMLBT4:
L
Linus Torvalds 已提交
3541 3542
		init_lmlbt4x(btv);
		break;
3543
	case BTTV_BOARD_TIBET_CS16:
L
Linus Torvalds 已提交
3544 3545
		tibetCS16_init(btv);
		break;
3546
	case BTTV_BOARD_KODICOM_4400R:
L
Linus Torvalds 已提交
3547 3548 3549 3550 3551
		kodicom4400r_init(btv);
		break;
	}

	/* pll configuration */
3552
	if (!(btv->id==848 && btv->revision==0x11)) {
L
Linus Torvalds 已提交
3553 3554 3555 3556 3557 3558 3559 3560 3561 3562
		/* defaults from card list */
		if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
			btv->pll.pll_ifreq=28636363;
			btv->pll.pll_crystal=BT848_IFORM_XT0;
		}
		if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
			btv->pll.pll_ifreq=35468950;
			btv->pll.pll_crystal=BT848_IFORM_XT1;
		}
		/* insmod options can override */
3563 3564
		switch (pll[btv->c.nr]) {
		case 0: /* none */
L
Linus Torvalds 已提交
3565 3566 3567
			btv->pll.pll_crystal = 0;
			btv->pll.pll_ifreq   = 0;
			btv->pll.pll_ofreq   = 0;
3568 3569
			break;
		case 1: /* 28 MHz */
L
Linus Torvalds 已提交
3570
		case 28:
3571
			btv->pll.pll_ifreq   = 28636363;
L
Linus Torvalds 已提交
3572
			btv->pll.pll_ofreq   = 0;
3573 3574 3575
			btv->pll.pll_crystal = BT848_IFORM_XT0;
			break;
		case 2: /* 35 MHz */
L
Linus Torvalds 已提交
3576
		case 35:
3577
			btv->pll.pll_ifreq   = 35468950;
L
Linus Torvalds 已提交
3578
			btv->pll.pll_ofreq   = 0;
3579 3580 3581 3582
			btv->pll.pll_crystal = BT848_IFORM_XT1;
			break;
		}
	}
L
Linus Torvalds 已提交
3583 3584 3585
	btv->pll.pll_current = -1;

	/* tuner configuration (from card list / autodetect / insmod option) */
3586 3587 3588 3589
	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
		addr = bttv_tvcards[btv->c.type].tuner_addr;

	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
L
Linus Torvalds 已提交
3590
		if(UNSET == btv->tuner_type)
3591
			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
L
Linus Torvalds 已提交
3592 3593
	if (UNSET != tuner[btv->c.nr])
		btv->tuner_type = tuner[btv->c.nr];
3594 3595 3596 3597 3598 3599 3600 3601 3602

	if (btv->tuner_type == TUNER_ABSENT ||
	    bttv_tvcards[btv->c.type].tuner == UNSET)
		printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
	else if(btv->tuner_type == UNSET)
		printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
	else
		printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
		       btv->tuner_type);
3603

M
Mauro Carvalho Chehab 已提交
3604
	if (btv->tuner_type != UNSET) {
3605
		struct tuner_setup tun_setup;
M
Mauro Carvalho Chehab 已提交
3606

3607
		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
M
Mauro Carvalho Chehab 已提交
3608
		tun_setup.type = btv->tuner_type;
3609
		tun_setup.addr = addr;
M
Mauro Carvalho Chehab 已提交
3610 3611 3612 3613

		bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
	}

3614
	if (btv->tda9887_conf) {
3615 3616 3617 3618 3619 3620
		struct v4l2_priv_tun_config tda9887_cfg;

		tda9887_cfg.tuner = TUNER_TDA9887;
		tda9887_cfg.priv = &btv->tda9887_conf;

		bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3621 3622
	}

L
Linus Torvalds 已提交
3623 3624 3625 3626 3627 3628 3629 3630 3631 3632
	btv->svhs = bttv_tvcards[btv->c.type].svhs;
	if (svhs[btv->c.nr] != UNSET)
		btv->svhs = svhs[btv->c.nr];
	if (remote[btv->c.nr] != UNSET)
		btv->has_remote = remote[btv->c.nr];

	if (bttv_tvcards[btv->c.type].has_radio)
		btv->has_radio=1;
	if (bttv_tvcards[btv->c.type].has_remote)
		btv->has_remote=1;
3633 3634
	if (!bttv_tvcards[btv->c.type].no_gpioirq)
		btv->gpioirq=1;
3635 3636 3637 3638
	if (bttv_tvcards[btv->c.type].volume_gpio)
		btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
L
Linus Torvalds 已提交
3639 3640 3641

	if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
		/* detect Bt832 chip for quartzsight digital camera */
3642 3643
		if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
		    (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
L
Linus Torvalds 已提交
3644 3645 3646 3647 3648 3649
			boot_bt832(btv);
	}

	if (!autoload)
		return;

3650 3651 3652
	if (bttv_tvcards[btv->c.type].tuner == UNSET)
		return;  /* no tuner or related drivers to load */

L
Linus Torvalds 已提交
3653 3654
	/* try to detect audio/fader chips */
	if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3655
	    bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
L
Linus Torvalds 已提交
3656 3657 3658
		request_module("msp3400");

	if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3659
	    bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
L
Linus Torvalds 已提交
3660 3661 3662
		request_module("msp3400");

	if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3663
	    bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
L
Linus Torvalds 已提交
3664 3665 3666
		request_module("tda9875");

	if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3667
	    bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
L
Linus Torvalds 已提交
3668 3669 3670 3671 3672
		request_module("tda7432");

	if (bttv_tvcards[btv->c.type].needs_tvaudio)
		request_module("tvaudio");

3673
	if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT)
L
Linus Torvalds 已提交
3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688
		request_module("tuner");
}


/* ----------------------------------------------------------------------- */

static void modtec_eeprom(struct bttv *btv)
{
	if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
		btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
		printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
		       btv->c.nr,&eeprom_data[0x1e]);
	} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
		btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
		printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3689 3690 3691 3692 3693
		       btv->c.nr,&eeprom_data[0x1e]);
	} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
		btv->tuner_type=TUNER_PHILIPS_NTSC;
		printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
		       btv->c.nr,&eeprom_data[0x1e]);
L
Linus Torvalds 已提交
3694 3695 3696 3697 3698 3699 3700 3701 3702 3703
	} else {
		printk("bttv%d: Modtec: Unknown TunerString: %s\n",
		       btv->c.nr,&eeprom_data[0x1e]);
	}
}

static void __devinit hauppauge_eeprom(struct bttv *btv)
{
	struct tveeprom tv;

3704
	tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
L
Linus Torvalds 已提交
3705 3706
	btv->tuner_type = tv.tuner_type;
	btv->has_radio  = tv.has_radio;
3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721

	printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
		btv->c.nr, tv.model);

	/*
	 * Some of the 878 boards have duplicate PCI IDs. Switch the board
	 * type based on model #.
	 */
	if(tv.model == 64900) {
		printk("bttv%d: Switching board type from %s to %s\n",
			btv->c.nr,
			bttv_tvcards[btv->c.type].name,
			bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
		btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
	}
L
Linus Torvalds 已提交
3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740
}

static int terratec_active_radio_upgrade(struct bttv *btv)
{
	int freq;

	btv->has_radio    = 1;
	btv->has_matchbox = 1;
	btv->mbox_we      = 0x10;
	btv->mbox_most    = 0x20;
	btv->mbox_clk     = 0x08;
	btv->mbox_data    = 0x04;
	btv->mbox_mask    = 0x3c;

	btv->mbox_iow     = 1 <<  8;
	btv->mbox_ior     = 1 <<  9;
	btv->mbox_csel    = 1 << 10;

	freq=88000/62.5;
3741
	tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
L
Linus Torvalds 已提交
3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772
	if (0x1ed8 == tea5757_read(btv)) {
		printk("bttv%d: Terratec Active Radio Upgrade found.\n",
		       btv->c.nr);
		btv->has_radio    = 1;
		btv->has_matchbox = 1;
	} else {
		btv->has_radio    = 0;
		btv->has_matchbox = 0;
	}
	return 0;
}


/* ----------------------------------------------------------------------- */

/*
 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
 *
 * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
 * unpacked with unzip).
 */
#define PVR_GPIO_DELAY		10

#define BTTV_ALT_DATA		0x000001
#define BTTV_ALT_DCLK		0x100000
#define BTTV_ALT_NCONFIG	0x800000

static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
{
	u32 n;
3773
	u8 bits;
L
Linus Torvalds 已提交
3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784
	int i;

	gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
	gpio_write(0);
	udelay(PVR_GPIO_DELAY);

	gpio_write(BTTV_ALT_NCONFIG);
	udelay(PVR_GPIO_DELAY);

	for (n = 0; n < microlen; n++) {
		bits = micro[n];
3785
		for (i = 0 ; i < 8 ; i++) {
L
Linus Torvalds 已提交
3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808
			gpio_bits(BTTV_ALT_DCLK,0);
			if (bits & 0x01)
				gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
			else
				gpio_bits(BTTV_ALT_DATA,0);
			gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
			bits >>= 1;
		}
	}
	gpio_bits(BTTV_ALT_DCLK,0);
	udelay(PVR_GPIO_DELAY);

	/* begin Altera init loop (Not necessary,but doesn't hurt) */
	for (i = 0 ; i < 30 ; i++) {
		gpio_bits(BTTV_ALT_DCLK,0);
		gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
	}
	gpio_bits(BTTV_ALT_DCLK,0);
	return 0;
}

static int __devinit pvr_boot(struct bttv *btv)
{
3809
	const struct firmware *fw_entry;
L
Linus Torvalds 已提交
3810 3811 3812 3813 3814 3815
	int rc;

	rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
	if (rc != 0) {
		printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
		       btv->c.nr);
3816 3817
		return rc;
	}
L
Linus Torvalds 已提交
3818 3819 3820
	rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
	printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
	       btv->c.nr, (rc < 0) ? "failed" : "ok");
3821
	release_firmware(fw_entry);
L
Linus Torvalds 已提交
3822 3823 3824 3825 3826 3827
	return rc;
}

/* ----------------------------------------------------------------------- */
/* some osprey specific stuff                                              */

3828
static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
L
Linus Torvalds 已提交
3829
{
3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846
	int i;
	u32 serial = 0;
	int cardid = -1;

	/* This code will nevery actually get called in this case.... */
	if (btv->c.type == BTTV_BOARD_UNKNOWN) {
		/* this might be an antique... check for MMAC label in eeprom */
		if (!strncmp(ee, "MMAC", 4)) {
			u8 checksum = 0;
			for (i = 0; i < 21; i++)
				checksum += ee[i];
			if (checksum != ee[21])
				return;
			cardid = BTTV_BOARD_OSPREY1x0_848;
			for (i = 12; i < 21; i++)
				serial *= 10, serial += ee[i] - '0';
		}
3847
	} else {
3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940
		unsigned short type;

		for (i = 4*16; i < 8*16; i += 16) {
			u16 checksum = ip_compute_csum(ee + i, 16);

			if ((checksum&0xff) + (checksum>>8) == 0xff)
				break;
		}
		if (i >= 8*16)
			return;
		ee += i;

		/* found a valid descriptor */
		type = be16_to_cpup((u16*)(ee+4));

		switch(type) {
		/* 848 based */
		case 0x0004:
			cardid = BTTV_BOARD_OSPREY1x0_848;
			break;
		case 0x0005:
			cardid = BTTV_BOARD_OSPREY101_848;
			break;

		/* 878 based */
		case 0x0012:
		case 0x0013:
			cardid = BTTV_BOARD_OSPREY1x0;
			break;
		case 0x0014:
		case 0x0015:
			cardid = BTTV_BOARD_OSPREY1x1;
			break;
		case 0x0016:
		case 0x0017:
		case 0x0020:
			cardid = BTTV_BOARD_OSPREY1x1_SVID;
			break;
		case 0x0018:
		case 0x0019:
		case 0x001E:
		case 0x001F:
			cardid = BTTV_BOARD_OSPREY2xx;
			break;
		case 0x001A:
		case 0x001B:
			cardid = BTTV_BOARD_OSPREY2x0_SVID;
			break;
		case 0x0040:
			cardid = BTTV_BOARD_OSPREY500;
			break;
		case 0x0050:
		case 0x0056:
			cardid = BTTV_BOARD_OSPREY540;
			/* bttv_osprey_540_init(btv); */
			break;
		case 0x0060:
		case 0x0070:
		case 0x00A0:
			cardid = BTTV_BOARD_OSPREY2x0;
			/* enable output on select control lines */
			gpio_inout(0xffffff,0x000303);
			break;
		case 0x00D8:
			cardid = BTTV_BOARD_OSPREY440;
			break;
		default:
			/* unknown...leave generic, but get serial # */
			printk(KERN_INFO "bttv%d: "
			       "osprey eeprom: unknown card type 0x%04x\n",
			       btv->c.nr, type);
			break;
		}
		serial = be32_to_cpup((u32*)(ee+6));
	}

	printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
	       btv->c.nr, cardid,
	       cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);

	if (cardid<0 || btv->c.type == cardid)
		return;

	/* card type isn't set correctly */
	if (card[btv->c.nr] < bttv_num_tvcards) {
		printk(KERN_WARNING "bttv%d: osprey eeprom: "
		       "Not overriding user specified card type\n", btv->c.nr);
	} else {
		printk(KERN_INFO "bttv%d: osprey eeprom: "
		       "Changing card type from %d to %d\n", btv->c.nr,
		       btv->c.type, cardid);
		btv->c.type = cardid;
	}
L
Linus Torvalds 已提交
3941 3942 3943 3944 3945 3946
}

/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from  bktr_card.c                             */

static int tuner_0_table[] = {
3947 3948 3949 3950 3951
	TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
L
Linus Torvalds 已提交
3952 3953 3954
	TUNER_PHILIPS_FM1216ME_MK3 };

static int tuner_1_table[] = {
3955
	TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
L
Linus Torvalds 已提交
3956 3957
	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3958 3959
	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
L
Linus Torvalds 已提交
3960 3961 3962

static void __devinit avermedia_eeprom(struct bttv *btv)
{
3963
	int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
L
Linus Torvalds 已提交
3964 3965

	tuner_make      = (eeprom_data[0x41] & 0x7);
3966 3967
	tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
	tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
L
Linus Torvalds 已提交
3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978
	btv->has_remote = (eeprom_data[0x42] & 0x01);

	if (tuner_make == 0 || tuner_make == 2)
		if(tuner_format <=0x0a)
			tuner = tuner_0_table[tuner_format];
	if (tuner_make == 1)
		if(tuner_format <=9)
			tuner = tuner_1_table[tuner_format];

	if (tuner_make == 4)
		if(tuner_format == 0x09)
3979
			tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
L
Linus Torvalds 已提交
3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995

	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
		btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
	if(tuner) {
		btv->tuner_type=tuner;
		printk("%d",tuner);
	} else
		printk("Unknown type");
	printk(" radio:%s remote control:%s\n",
	       tuner_tv_fm     ? "yes" : "no",
	       btv->has_remote ? "yes" : "no");
}

/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
{
3996
	/* fix up our card entry */
3997
	if(norm==V4L2_STD_NTSC) {
3998 3999
		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
4000 4001
		bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
		bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
L
Linus Torvalds 已提交
4002 4003 4004
		dprintk("bttv_tda9880_setnorm to NTSC\n");
	}
	else {
4005 4006
		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
4007 4008
		bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
		bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
L
Linus Torvalds 已提交
4009 4010
		dprintk("bttv_tda9880_setnorm to PAL\n");
	}
4011
	/* set GPIO according */
L
Linus Torvalds 已提交
4012
	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
4013
		  bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
L
Linus Torvalds 已提交
4014 4015 4016 4017 4018
}


/*
 * reset/enable the MSP on some Hauppauge cards
4019
 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
L
Linus Torvalds 已提交
4020 4021 4022 4023 4024 4025 4026 4027 4028 4029
 *
 * Hauppauge:  pin  5
 * Voodoo:     pin 20
 */
static void __devinit boot_msp34xx(struct bttv *btv, int pin)
{
	int mask = (1 << pin);

	gpio_inout(mask,mask);
	gpio_bits(mask,0);
4030
	udelay(2500);
L
Linus Torvalds 已提交
4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105
	gpio_bits(mask,mask);

	if (bttv_gpio)
		bttv_gpio_tracking(btv,"msp34xx");
	if (bttv_verbose)
		printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
		       "init [%d]\n", btv->c.nr, pin);
}

static void __devinit boot_bt832(struct bttv *btv)
{
}

/* ----------------------------------------------------------------------- */
/*  Imagenation L-Model PXC200 Framegrabber */
/*  This is basically the same procedure as
 *  used by Alessandro Rubini in his pxc200
 *  driver, but using BTTV functions */

static void __devinit init_PXC200(struct bttv *btv)
{
	static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
					    0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
					    0x00 };
	unsigned int i;
	int tmp;
	u32 val;

	/* Initialise GPIO-connevted stuff */
	gpio_inout(0xffffff, (1<<13));
	gpio_write(0);
	udelay(3);
	gpio_write(1<<13);
	/* GPIO inputs are pulled up, so no need to drive
	 * reset pin any longer */
	gpio_bits(0xffffff, 0);
	if (bttv_gpio)
		bttv_gpio_tracking(btv,"pxc200");

	/*  we could/should try and reset/control the AD pots? but
	    right now  we simply  turned off the crushing.  Without
	    this the AGC drifts drifts
	    remember the EN is reverse logic -->
	    setting BT848_ADC_AGC_EN disable the AGC
	    tboult@eecs.lehigh.edu
	*/

	btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);

	/*	Initialise MAX517 DAC */
	printk(KERN_INFO "Setting DAC reference voltage level ...\n");
	bttv_I2CWrite(btv,0x5E,0,0x80,1);

	/*	Initialise 12C508 PIC */
	/*	The I2CWrite and I2CRead commmands are actually to the
	 *	same chips - but the R/W bit is included in the address
	 *	argument so the numbers are different */


	printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");

	/* First of all, enable the clock line. This is used in the PXC200-F */
	val = btread(BT848_GPIO_DMA_CTL);
	val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
	btwrite(val, BT848_GPIO_DMA_CTL);

	/* Then, push to 0 the reset pin long enough to reset the *
	 * device same as above for the reset line, but not the same
	 * value sent to the GPIO-connected stuff
	 * which one is the good one? */
	gpio_inout(0xffffff,(1<<2));
	gpio_write(0);
	udelay(10);
	gpio_write(1<<2);

4106
	for (i = 0; i < ARRAY_SIZE(vals); i++) {
L
Linus Torvalds 已提交
4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117
		tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
		if (tmp != -1) {
			printk(KERN_INFO
			       "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
			       vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
		}
	}

	printk(KERN_INFO "PXC200 Initialised.\n");
}

M
Mauro Carvalho Chehab 已提交
4118 4119


4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143
/* ----------------------------------------------------------------------- */
/*
 *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
 *  it. This apparently involves the following procedure for each 878 chip:
 *
 *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
 *
 *  2)  write to GPIO_DATA
 *      - 0x0E
 *      - sleep 1ms
 *      - 0x10 + 0x0E
 *      - sleep 10ms
 *      - 0x0E
 *     read from GPIO_DATA into buf (uint_32)
 *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
 *                 error. ERROR_CPLD_Check_Failed stop.
 *
 *  3) write to GPIO_DATA
 *      - write 0x4400 + 0x0E
 *      - sleep 10ms
 *      - write 0x4410 + 0x0E
 *      - sleep 1ms
 *      - write 0x0E
 *     read from GPIO_DATA into buf (uint_32)
4144
 *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4145 4146 4147
 *                error. ERROR_CPLD_Check_Failed.
 */
/* ----------------------------------------------------------------------- */
4148
static void
M
Mauro Carvalho Chehab 已提交
4149
init_RTV24 (struct bttv *btv)
4150
{
M
Mauro Carvalho Chehab 已提交
4151 4152
	uint32_t dataRead = 0;
	long watchdog_value = 0x0E;
4153

M
Mauro Carvalho Chehab 已提交
4154 4155
	printk (KERN_INFO
		"bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4156 4157
		btv->c.nr);

M
Mauro Carvalho Chehab 已提交
4158
	btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4159

M
Mauro Carvalho Chehab 已提交
4160 4161 4162 4163 4164
	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
	msleep (1);
	btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
	msleep (10);
	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4165

M
Mauro Carvalho Chehab 已提交
4166
	dataRead = btread (BT848_GPIO_DATA);
4167

M
Mauro Carvalho Chehab 已提交
4168 4169 4170 4171
	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
		printk (KERN_INFO
			"bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
			btv->c.nr, dataRead);
4172 4173
	}

M
Mauro Carvalho Chehab 已提交
4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186
	btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
	msleep (10);
	btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
	msleep (1);
	btwrite (watchdog_value, BT848_GPIO_DATA);
	msleep (1);
	dataRead = btread (BT848_GPIO_DATA);

	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
		printk (KERN_INFO
			"bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
			btv->c.nr, dataRead);

4187 4188 4189
		return;
	}

M
Mauro Carvalho Chehab 已提交
4190 4191
	printk (KERN_INFO
		"bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4192
}
L
Linus Torvalds 已提交
4193

M
Mauro Carvalho Chehab 已提交
4194 4195


L
Linus Torvalds 已提交
4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
/*
 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
 * This code is placed under the terms of the GNU General Public License
 *
 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
 */

static void bus_low(struct bttv *btv, int bit)
{
	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
		udelay(5);
	}

	gpio_bits(bit,0);
	udelay(5);

	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
		udelay(5);
	}
}

static void bus_high(struct bttv *btv, int bit)
{
	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
		udelay(5);
	}

	gpio_bits(bit,bit);
	udelay(5);

	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
		udelay(5);
	}
}

static int bus_in(struct bttv *btv, int bit)
{
	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
		udelay(5);

		gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
		udelay(5);
	}
	return gpio_read() & (bit);
}

/* TEA5757 register bits */
#define TEA_FREQ		0:14
#define TEA_BUFFER		15:15

#define TEA_SIGNAL_STRENGTH	16:17

#define TEA_PORT1		18:18
#define TEA_PORT0		19:19

#define TEA_BAND		20:21
#define TEA_BAND_FM		0
#define TEA_BAND_MW		1
#define TEA_BAND_LW		2
#define TEA_BAND_SW		3

#define TEA_MONO		22:22
#define TEA_ALLOW_STEREO	0
#define TEA_FORCE_MONO		1

#define TEA_SEARCH_DIRECTION	23:23
#define TEA_SEARCH_DOWN		0
#define TEA_SEARCH_UP		1

#define TEA_STATUS		24:24
#define TEA_STATUS_TUNED	0
#define TEA_STATUS_SEARCHING	1

/* Low-level stuff */
static int tea5757_read(struct bttv *btv)
{
	unsigned long timeout;
	int value = 0;
	int i;

	/* better safe than sorry */
	gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);

	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
		udelay(5);
	}

	if (bttv_gpio)
		bttv_gpio_tracking(btv,"tea5757 read");

	bus_low(btv,btv->mbox_we);
	bus_low(btv,btv->mbox_clk);

	udelay(10);
4302
	timeout= jiffies + msecs_to_jiffies(1000);
L
Linus Torvalds 已提交
4303

4304
	/* wait for DATA line to go low; error if it doesn't */
L
Linus Torvalds 已提交
4305 4306 4307 4308 4309 4310 4311 4312
	while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
		schedule();
	if (bus_in(btv,btv->mbox_data)) {
		printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
		return -1;
	}

	dprintk("bttv%d: tea5757:",btv->c.nr);
4313
	for (i = 0; i < 24; i++) {
L
Linus Torvalds 已提交
4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344
		udelay(5);
		bus_high(btv,btv->mbox_clk);
		udelay(5);
		dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
		bus_low(btv,btv->mbox_clk);
		value <<= 1;
		value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
		dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
	}
	dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
	return value;
}

static int tea5757_write(struct bttv *btv, int value)
{
	int i;
	int reg = value;

	gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);

	if (btv->mbox_ior) {
		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
		udelay(5);
	}
	if (bttv_gpio)
		bttv_gpio_tracking(btv,"tea5757 write");

	dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
	bus_low(btv,btv->mbox_clk);
	bus_high(btv,btv->mbox_we);
4345
	for (i = 0; i < 25; i++) {
L
Linus Torvalds 已提交
4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374
		if (reg & 0x1000000)
			bus_high(btv,btv->mbox_data);
		else
			bus_low(btv,btv->mbox_data);
		reg <<= 1;
		bus_high(btv,btv->mbox_clk);
		udelay(10);
		bus_low(btv,btv->mbox_clk);
		udelay(10);
	}
	bus_low(btv,btv->mbox_we);  /* unmute !!! */
	return 0;
}

void tea5757_set_freq(struct bttv *btv, unsigned short freq)
{
	dprintk("tea5757_set_freq %d\n",freq);
	tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
}

/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
 *
 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
 * switch instead (CD22M3494E). This IC can have multiple active connections
 * between Xn (input) and Yn (output) pins. We need to clear any existing
 * connection prior to establish a new one, pulsing the STROBE pin.
 *
 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
 * GPIO pins are wired as:
4375 4376 4377 4378 4379 4380 4381
 *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
 *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
 *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
 *  GPIO[8]   -                  - P3[5] (microcontroller)
 *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
 *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
 *  GPINTR    -                  - P3[4] (microcontroller)
L
Linus Torvalds 已提交
4382
 *
4383 4384
 * The microcontroller is a 80C32 like. It should be possible to change xpoint
 * configuration either directly (as we are doing) or using the microcontroller
L
Linus Torvalds 已提交
4385
 * which is also wired to I2C interface. I have no further info on the
4386
 * microcontroller features, one would need to disassembly the firmware.
L
Linus Torvalds 已提交
4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397
 * note: the vendor refused to give any information on this product, all
 *       that stuff was found using a multimeter! :)
 */
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
	/* reset all conections */
	gpio_bits(0x200,0x200);
	mdelay(1);
	gpio_bits(0x200,0x000);
	mdelay(1);

J
Joe Perches 已提交
4398
	/* create a new connection */
L
Linus Torvalds 已提交
4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453
	gpio_bits(0x480,0x080);
	gpio_bits(0x480,0x480);
	mdelay(1);
	gpio_bits(0x480,0x080);
	mdelay(1);
}

/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
 *
 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
 * chips, ten eight input analog multiplexors, a not chip and a few
 * other components.
 *
 * 16 inputs on a secondary bracket are provided and can be selected
 * from each of the four capture chips.  Two of the eight input
 * multiplexors are used to select from any of the 16 input signals.
 *
 * Unsupported hardware capabilities:
 *  . A video output monitor on the secondary bracket can be selected from
 *    one of the 878A chips.
 *  . Another passthrough but I haven't spent any time investigating it.
 *  . Digital I/O (logic level connected to GPIO) is available from an
 *    onboard header.
 *
 * The on chip input mux should always be set to 2.
 * GPIO[16:19] - Video input selection
 * GPIO[0:3]   - Video output monitor select (only available from one 878A)
 * GPIO[?:?]   - Digital I/O.
 *
 * There is an ATMEL microcontroller with an 8031 core on board.  I have not
 * determined what function (if any) it provides.  With the microcontroller
 * and sync seperator chips a guess is that it might have to do with video
 * switching and maybe some digital I/O.
 */
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
{
	/* video mux */
	gpio_bits(0x0f0000, input << 16);
}

static void tibetCS16_init(struct bttv *btv)
{
	/* enable gpio bits, mask obtained via btSpy */
	gpio_inout(0xffffff, 0x0f7fff);
	gpio_write(0x0f7fff);
}

/*
 * The following routines for the Kodicom-4400r get a little mind-twisting.
 * There is a "master" controller and three "slave" controllers, together
 * an analog switch which connects any of 16 cameras to any of the BT87A's.
 * The analog switch is controlled by the "master", but the detection order
 * of the four BT878A chips is in an order which I just don't understand.
 * The "master" is actually the second controller to be detected.  The
4454
 * logic on the board uses logical numbers for the 4 controllers, but
L
Linus Torvalds 已提交
4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535
 * those numbers are different from the detection sequence.  When working
 * with the analog switch, we need to "map" from the detection sequence
 * over to the board's logical controller number.  This mapping sequence
 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
 * unit 3, the second (which is the master) is logical unit 0, etc.
 * We need to maintain the status of the analog switch (which of the 16
 * cameras is connected to which of the 4 controllers).  Rather than
 * add to the bttv structure for this, we use the data reserved for
 * the mbox (unused for this card type).
 */

/*
 * First a routine to set the analog switch, which controls which camera
 * is routed to which controller.  The switch comprises an X-address
 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
 * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
 * specified address.  The idea is to set the address and data, then bring
 * STROBE high, and finally bring STROBE back to low.
 */
static void kodicom4400r_write(struct bttv *btv,
			       unsigned char xaddr,
			       unsigned char yaddr,
			       unsigned char data) {
	unsigned int udata;

	udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
	gpio_bits(0x1ff, udata);		/* write ADDR and DAT */
	gpio_bits(0x1ff, udata | (1 << 8));	/* strobe high */
	gpio_bits(0x1ff, udata);		/* strobe low */
}

/*
 * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
 * use this routine.  The routine finds the "master" for the card, maps
 * the controller number from the detected position over to the logical
 * number, writes the appropriate data to the analog switch, and housekeeps
 * the local copy of the switch information.  The parameter 'input' is the
 * requested camera number (0 - 15).
 */
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
{
	char *sw_status;
	int xaddr, yaddr;
	struct bttv *mctlr;
	static unsigned char map[4] = {3, 0, 2, 1};

	mctlr = master[btv->c.nr];
	if (mctlr == NULL) {	/* ignore if master not yet detected */
		return;
	}
	yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
	yaddr = map[yaddr];
	sw_status = (char *)(&mctlr->mbox_we);
	xaddr = input & 0xf;
	/* Check if the controller/camera pair has changed, else ignore */
	if (sw_status[yaddr] != xaddr)
	{
		/* "open" the old switch, "close" the new one, save the new */
		kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
		sw_status[yaddr] = xaddr;
		kodicom4400r_write(mctlr, xaddr, yaddr, 1);
	}
}

/*
 * During initialisation, we need to reset the analog switch.  We
 * also preset the switch to map the 4 connectors on the card to the
 * *user's* (see above description of kodicom4400r_muxsel) channels
 * 0 through 3
 */
static void kodicom4400r_init(struct bttv *btv)
{
	char *sw_status = (char *)(&btv->mbox_we);
	int ix;

	gpio_inout(0x0003ff, 0x0003ff);
	gpio_write(1 << 9);	/* reset MUX */
	gpio_write(0);
	/* Preset camera 0 to the 4 controllers */
4536
	for (ix = 0; ix < 4; ix++) {
L
Linus Torvalds 已提交
4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552
		sw_status[ix] = ix;
		kodicom4400r_write(btv, ix, ix, 1);
	}
	/*
	 * Since this is the "master", we need to set up the
	 * other three controller chips' pointers to this structure
	 * for later use in the muxsel routine.
	 */
	if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
	    return;
	master[btv->c.nr-1] = btv;
	master[btv->c.nr]   = btv;
	master[btv->c.nr+1] = btv;
	master[btv->c.nr+2] = btv;
}

4553 4554 4555 4556
/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
 * video multiplexers to provide up to 16 video inputs. These
 * multiplexers are controlled by the lower 8 GPIO pins of the
 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
L
Linus Torvalds 已提交
4557

4558 4559 4560
 * xxx0 is pin xxx of multiplexer U5,
 * yyy1 is pin yyy of multiplexer U2
 */
L
Linus Torvalds 已提交
4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573
#define ENA0    0x01
#define ENB0    0x02
#define ENA1    0x04
#define ENB1    0x08

#define IN10    0x10
#define IN00    0x20
#define IN11    0x40
#define IN01    0x80

static void xguard_muxsel(struct bttv *btv, unsigned int input)
{
	static const int masks[] = {
4574 4575 4576 4577
		ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
		ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
		ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
		ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
L
Linus Torvalds 已提交
4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601
	};
	gpio_write(masks[input%16]);
}
static void picolo_tetra_init(struct bttv *btv)
{
	/*This is the video input redirection fonctionality : I DID NOT USED IT. */
	btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
	btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
}
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{

	dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
	/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
	/*GPIO[20]&GPIO[21] used to choose the right input*/
	btwrite (input<<20,BT848_GPIO_DATA);

}

/*
 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
 *
 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
 * swichers to provide 16 channels to MUX0. The TDA8540's have
A
Andreas Mohr 已提交
4602
 * 4 independent outputs and as such the IVC120G also has the
L
Linus Torvalds 已提交
4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630
 * optional "Monitor Out" bus. This allows the card to be looking
 * at one input while the monitor is looking at another.
 *
 * Since I've couldn't be bothered figuring out how to add an
 * independant muxsel for the monitor bus, I've just set it to
 * whatever the card is looking at.
 *
 *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
 *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
 *
 *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
 *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
 *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
 *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
 *
 */

/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
#define I2C_TDA8540        0x90
#define I2C_TDA8540_ALT1   0x92
#define I2C_TDA8540_ALT2   0x94
#define I2C_TDA8540_ALT3   0x96
#define I2C_TDA8540_ALT4   0x98
#define I2C_TDA8540_ALT5   0x9a
#define I2C_TDA8540_ALT6   0x9c

static void ivc120_muxsel(struct bttv *btv, unsigned int input)
{
4631
	/* Simple maths */
L
Linus Torvalds 已提交
4632 4633 4634 4635 4636 4637
	int key = input % 4;
	int matrix = input / 4;

	dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
		btv->c.nr, input, matrix, key);

4638
	/* Handles the input selection on the TDA8540's */
L
Linus Torvalds 已提交
4639 4640 4641 4642 4643 4644 4645 4646 4647
	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
		      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
		      ((matrix == 0) ? (key | key << 2) : 0x00), 1);
	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
		      ((matrix == 1) ? (key | key << 2) : 0x00), 1);
	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
		      ((matrix == 2) ? (key | key << 2) : 0x00), 1);

4648
	/* Handles the output enables on the TDA8540's */
L
Linus Torvalds 已提交
4649
	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4650
		      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
L
Linus Torvalds 已提交
4651
	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4652
		      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
L
Linus Torvalds 已提交
4653
	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4654
		      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
L
Linus Torvalds 已提交
4655
	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4656
		      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
L
Linus Torvalds 已提交
4657

4658
	/* Selects MUX0 for input on the 878 */
L
Linus Torvalds 已提交
4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681
	btaor((0)<<5, ~(3<<5), BT848_IFORM);
}


/* PXC200 muxsel helper
 * luke@syseng.anu.edu.au
 * another transplant
 * from Alessandro Rubini (rubini@linux.it)
 *
 * There are 4 kinds of cards:
 * PXC200L which is bt848
 * PXC200F which is bt848 with PIC controlling mux
 * PXC200AL which is bt878
 * PXC200AF which is bt878 with PIC controlling mux
 */
#define PX_CFG_PXC200F 0x01
#define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
#define PX_I2C_PIC       0x0f
#define PX_PXC200A_CARDID 0x200a1295
#define PX_I2C_CMD_CFG   0x00

static void PXC200_muxsel(struct bttv *btv, unsigned int input)
{
4682
	int rc;
L
Linus Torvalds 已提交
4683 4684
	long mux;
	int bitmask;
4685
	unsigned char buf[2];
L
Linus Torvalds 已提交
4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714

	/* Read PIC config to determine if this is a PXC200F */
	/* PX_I2C_CMD_CFG*/
	buf[0]=0;
	buf[1]=0;
	rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
	if (rc) {
	  printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
	  /* not PXC ? do nothing */
	  return;
	}

	rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
	if (!(rc & PX_CFG_PXC200F)) {
	  printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
	  return;
	}


	/* The multiplexer in the 200F is handled by the GPIO port */
	/* get correct mapping between inputs  */
	/*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
	/* ** not needed!?   */
	mux = input;

	/* make sure output pins are enabled */
	/* bitmask=0x30f; */
	bitmask=0x302;
	/* check whether we have a PXC200A */
4715
	if (btv->cardid == PX_PXC200A_CARDID)  {
L
Linus Torvalds 已提交
4716 4717 4718 4719 4720 4721
	   bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
	   bitmask |= 7<<4; /* the DAC */
	}
	btwrite(bitmask, BT848_GPIO_OUT_EN);

	bitmask = btread(BT848_GPIO_DATA);
4722
	if (btv->cardid == PX_PXC200A_CARDID)
L
Linus Torvalds 已提交
4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734
	  bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
	else /* older device */
	  bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
	btwrite(bitmask,BT848_GPIO_DATA);

	/*
	 * Was "to be safe, set the bt848 to input 0"
	 * Actually, since it's ok at load time, better not messing
	 * with these bits (on PXC200AF you need to set mux 2 here)
	 *
	 * needed because bttv-driver sets mux before calling this function
	 */
4735
	if (btv->cardid == PX_PXC200A_CARDID)
L
Linus Torvalds 已提交
4736 4737 4738 4739 4740 4741 4742 4743 4744 4745
	  btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
	else /* older device */
	  btand(~BT848_IFORM_MUXSEL,BT848_IFORM);

	printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
}

/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff                                      */

A
Adrian Bunk 已提交
4746
void __init bttv_check_chipset(void)
L
Linus Torvalds 已提交
4747 4748 4749 4750
{
	int pcipci_fail = 0;
	struct pci_dev *dev = NULL;

4751
	if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) 	/* should check if target is AGP */
L
Linus Torvalds 已提交
4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768
		pcipci_fail = 1;
	if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
		triton1 = 1;
	if (pci_pci_problems & PCIPCI_VSFX)
		vsfx = 1;
#ifdef PCIPCI_ALIMAGIK
	if (pci_pci_problems & PCIPCI_ALIMAGIK)
		latency = 0x0A;
#endif


	/* print warnings about any quirks found */
	if (triton1)
		printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
	if (vsfx)
		printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
	if (pcipci_fail) {
4769 4770
		printk(KERN_INFO "bttv: bttv and your chipset may not work "
							"together.\n");
4771
		if (!no_overlay) {
4772
			printk(KERN_INFO "bttv: overlay will be disabled.\n");
L
Linus Torvalds 已提交
4773
			no_overlay = 1;
4774
		} else {
4775 4776
			printk(KERN_INFO "bttv: overlay forced. Use this "
						"option at your own risk.\n");
L
Linus Torvalds 已提交
4777 4778 4779 4780
		}
	}
	if (UNSET != latency)
		printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4781
	while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
L
Linus Torvalds 已提交
4782
				      PCI_DEVICE_ID_INTEL_82441, dev))) {
4783
		unsigned char b;
L
Linus Torvalds 已提交
4784 4785 4786 4787 4788 4789 4790 4791 4792
		pci_read_config_byte(dev, 0x53, &b);
		if (bttv_debug)
			printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
			       "bufcon=0x%02x\n",b);
	}
}

int __devinit bttv_handle_chipset(struct bttv *btv)
{
4793
	unsigned char command;
L
Linus Torvalds 已提交
4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813

	if (!triton1 && !vsfx && UNSET == latency)
		return 0;

	if (bttv_verbose) {
		if (triton1)
			printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
		if (vsfx && btv->id >= 878)
			printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
		if (UNSET != latency)
			printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
			       btv->c.nr,latency);
	}

	if (btv->id < 878) {
		/* bt848 (mis)uses a bit in the irq mask for etbf */
		if (triton1)
			btv->triton1 = BT848_INT_ETBF;
	} else {
		/* bt878 has a bit in the pci config space for it */
4814
		pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
L
Linus Torvalds 已提交
4815 4816 4817 4818
		if (triton1)
			command |= BT878_EN_TBFX;
		if (vsfx)
			command |= BT878_EN_VSFX;
4819 4820
		pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
	}
L
Linus Torvalds 已提交
4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831
	if (UNSET != latency)
		pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
	return 0;
}


/*
 * Local variables:
 * c-basic-offset: 8
 * End:
 */