ibmphp_core.c 33.4 KB
Newer Older
1
// SPDX-License-Identifier: GPL-2.0+
L
Linus Torvalds 已提交
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
/*
 * IBM Hot Plug Controller Driver
 *
 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
 *
 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
 * Copyright (C) 2001-2003 IBM Corp.
 *
 * All rights reserved.
 *
 * Send feedback to <gregkh@us.ibm.com>
 *
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/wait.h>
#include "../pci.h"
24
#include <asm/pci_x86.h>		/* for struct irq_routing_table */
25
#include <asm/io_apic.h>
L
Linus Torvalds 已提交
26 27
#include "ibmphp.h"

B
Bogicevic Sasa 已提交
28 29 30 31 32
#define attn_on(sl)  ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNON)
#define attn_off(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNOFF)
#define attn_LED_blink(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_BLINKLED)
#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot(sl, READ_REVLEVEL, rev)
#define get_hpc_options(sl, opt) ibmphp_hpc_readslot(sl, READ_HPCOPTIONS, opt)
L
Linus Torvalds 已提交
33 34 35 36 37 38

#define DRIVER_VERSION	"0.6"
#define DRIVER_DESC	"IBM Hot Plug PCI Controller Driver"

int ibmphp_debug;

39
static bool debug;
L
Linus Torvalds 已提交
40
module_param(debug, bool, S_IRUGO | S_IWUSR);
B
Bogicevic Sasa 已提交
41 42 43
MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
L
Linus Torvalds 已提交
44 45 46 47

struct pci_bus *ibmphp_pci_bus;
static int max_slots;

48
static int irqs[16];    /* PIC mode IRQs we're using so far (in case MPS
L
Linus Torvalds 已提交
49 50 51 52 53 54 55 56 57 58 59 60
			 * tables don't provide default info for empty slots */

static int init_flag;

/*
static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8);

static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value)
{
	return get_max_adapter_speed_1 (hs, value, 1);
}
*/
61
static inline int get_cur_bus_info(struct slot **sl)
L
Linus Torvalds 已提交
62 63
{
	int rc = 1;
R
Ryan Desfosses 已提交
64
	struct slot *slot_cur = *sl;
L
Linus Torvalds 已提交
65 66

	debug("options = %x\n", slot_cur->ctrl->options);
67
	debug("revision = %x\n", slot_cur->ctrl->revision);
L
Linus Torvalds 已提交
68

69
	if (READ_BUS_STATUS(slot_cur->ctrl))
L
Linus Torvalds 已提交
70
		rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
71 72

	if (rc)
L
Linus Torvalds 已提交
73
		return rc;
74

L
Linus Torvalds 已提交
75 76 77 78 79 80 81 82 83 84 85
	slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
	if (READ_BUS_MODE(slot_cur->ctrl))
		slot_cur->bus_on->current_bus_mode =
				CURRENT_BUS_MODE(slot_cur->busstatus);
	else
		slot_cur->bus_on->current_bus_mode = 0xFF;

	debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n",
			slot_cur->busstatus,
			slot_cur->bus_on->current_speed,
			slot_cur->bus_on->current_bus_mode);
86

L
Linus Torvalds 已提交
87 88 89 90 91 92 93
	*sl = slot_cur;
	return 0;
}

static inline int slot_update(struct slot **sl)
{
	int rc;
94 95
	rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
	if (rc)
L
Linus Torvalds 已提交
96 97 98 99 100 101
		return rc;
	if (!init_flag)
		rc = get_cur_bus_info(sl);
	return rc;
}

B
Bogicevic Sasa 已提交
102
static int __init get_max_slots(void)
L
Linus Torvalds 已提交
103
{
R
Ryan Desfosses 已提交
104
	struct slot *slot_cur;
L
Linus Torvalds 已提交
105 106
	u8 slot_count = 0;

107
	list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
L
Linus Torvalds 已提交
108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135
		/* sometimes the hot-pluggable slots start with 4 (not always from 1) */
		slot_count = max(slot_count, slot_cur->number);
	}
	return slot_count;
}

/* This routine will put the correct slot->device information per slot.  It's
 * called from initialization of the slot structures. It will also assign
 * interrupt numbers per each slot.
 * Parameters: struct slot
 * Returns 0 or errors
 */
int ibmphp_init_devno(struct slot **cur_slot)
{
	struct irq_routing_table *rtable;
	int len;
	int loop;
	int i;

	rtable = pcibios_get_irq_routing_table();
	if (!rtable) {
		err("no BIOS routing table...\n");
		return -ENOMEM;
	}

	len = (rtable->size - sizeof(struct irq_routing_table)) /
			sizeof(struct irq_info);

136 137
	if (!len) {
		kfree(rtable);
L
Linus Torvalds 已提交
138
		return -1;
139
	}
L
Linus Torvalds 已提交
140
	for (loop = 0; loop < len; loop++) {
141 142
		if ((*cur_slot)->number == rtable->slots[loop].slot &&
		    (*cur_slot)->bus == rtable->slots[loop].bus) {
L
Linus Torvalds 已提交
143 144 145
			(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
			for (i = 0; i < 4; i++)
				(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
146
						(int) (*cur_slot)->device, i);
147 148 149 150 151 152 153 154 155 156

			debug("(*cur_slot)->irq[0] = %x\n",
					(*cur_slot)->irq[0]);
			debug("(*cur_slot)->irq[1] = %x\n",
					(*cur_slot)->irq[1]);
			debug("(*cur_slot)->irq[2] = %x\n",
					(*cur_slot)->irq[2]);
			debug("(*cur_slot)->irq[3] = %x\n",
					(*cur_slot)->irq[3]);

157
			debug("rtable->exclusive_irqs = %x\n",
L
Linus Torvalds 已提交
158
					rtable->exclusive_irqs);
159
			debug("rtable->slots[loop].irq[0].bitmap = %x\n",
L
Linus Torvalds 已提交
160
					rtable->slots[loop].irq[0].bitmap);
161
			debug("rtable->slots[loop].irq[1].bitmap = %x\n",
L
Linus Torvalds 已提交
162
					rtable->slots[loop].irq[1].bitmap);
163
			debug("rtable->slots[loop].irq[2].bitmap = %x\n",
L
Linus Torvalds 已提交
164
					rtable->slots[loop].irq[2].bitmap);
165
			debug("rtable->slots[loop].irq[3].bitmap = %x\n",
L
Linus Torvalds 已提交
166 167
					rtable->slots[loop].irq[3].bitmap);

168
			debug("rtable->slots[loop].irq[0].link = %x\n",
L
Linus Torvalds 已提交
169
					rtable->slots[loop].irq[0].link);
170
			debug("rtable->slots[loop].irq[1].link = %x\n",
L
Linus Torvalds 已提交
171
					rtable->slots[loop].irq[1].link);
172
			debug("rtable->slots[loop].irq[2].link = %x\n",
L
Linus Torvalds 已提交
173
					rtable->slots[loop].irq[2].link);
174
			debug("rtable->slots[loop].irq[3].link = %x\n",
L
Linus Torvalds 已提交
175
					rtable->slots[loop].irq[3].link);
176 177 178
			debug("end of init_devno\n");
			kfree(rtable);
			return 0;
L
Linus Torvalds 已提交
179 180 181
		}
	}

182
	kfree(rtable);
L
Linus Torvalds 已提交
183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224
	return -1;
}

static inline int power_on(struct slot *slot_cur)
{
	u8 cmd = HPC_SLOT_ON;
	int retval;

	retval = ibmphp_hpc_writeslot(slot_cur, cmd);
	if (retval) {
		err("power on failed\n");
		return retval;
	}
	if (CTLR_RESULT(slot_cur->ctrl->status)) {
		err("command not completed successfully in power_on\n");
		return -EIO;
	}
	msleep(3000);	/* For ServeRAID cards, and some 66 PCI */
	return 0;
}

static inline int power_off(struct slot *slot_cur)
{
	u8 cmd = HPC_SLOT_OFF;
	int retval;

	retval = ibmphp_hpc_writeslot(slot_cur, cmd);
	if (retval) {
		err("power off failed\n");
		return retval;
	}
	if (CTLR_RESULT(slot_cur->ctrl->status)) {
		err("command not completed successfully in power_off\n");
		retval = -EIO;
	}
	return retval;
}

static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
{
	int rc = 0;
	struct slot *pslot;
225
	u8 cmd = 0x00;     /* avoid compiler warning */
L
Linus Torvalds 已提交
226 227 228 229

	debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
			(ulong) hotplug_slot, value);
	ibmphp_lock_operations();
230

L
Linus Torvalds 已提交
231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255

	if (hotplug_slot) {
		switch (value) {
		case HPC_SLOT_ATTN_OFF:
			cmd = HPC_SLOT_ATTNOFF;
			break;
		case HPC_SLOT_ATTN_ON:
			cmd = HPC_SLOT_ATTNON;
			break;
		case HPC_SLOT_ATTN_BLINK:
			cmd = HPC_SLOT_BLINKLED;
			break;
		default:
			rc = -ENODEV;
			err("set_attention_status - Error : invalid input [%x]\n",
					value);
			break;
		}
		if (rc == 0) {
			pslot = hotplug_slot->private;
			if (pslot)
				rc = ibmphp_hpc_writeslot(pslot, cmd);
			else
				rc = -ENODEV;
		}
256
	} else
L
Linus Torvalds 已提交
257 258 259 260 261 262 263 264
		rc = -ENODEV;

	ibmphp_unlock_operations();

	debug("set_attention_status - Exit rc[%d]\n", rc);
	return rc;
}

R
Ryan Desfosses 已提交
265
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
L
Linus Torvalds 已提交
266 267 268 269 270 271 272
{
	int rc = -ENODEV;
	struct slot *pslot;
	struct slot myslot;

	debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
					(ulong) hotplug_slot, (ulong) value);
273

L
Linus Torvalds 已提交
274
	ibmphp_lock_operations();
275
	if (hotplug_slot) {
L
Linus Torvalds 已提交
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295
		pslot = hotplug_slot->private;
		if (pslot) {
			memcpy(&myslot, pslot, sizeof(struct slot));
			rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
						&(myslot.status));
			if (!rc)
				rc = ibmphp_hpc_readslot(pslot,
						READ_EXTSLOTSTATUS,
						&(myslot.ext_status));
			if (!rc)
				*value = SLOT_ATTN(myslot.status,
						myslot.ext_status);
		}
	}

	ibmphp_unlock_operations();
	debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value);
	return rc;
}

R
Ryan Desfosses 已提交
296
static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
L
Linus Torvalds 已提交
297 298 299 300 301 302 303 304
{
	int rc = -ENODEV;
	struct slot *pslot;
	struct slot myslot;

	debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
					(ulong) hotplug_slot, (ulong) value);
	ibmphp_lock_operations();
305
	if (hotplug_slot) {
L
Linus Torvalds 已提交
306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322
		pslot = hotplug_slot->private;
		if (pslot) {
			memcpy(&myslot, pslot, sizeof(struct slot));
			rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
						&(myslot.status));
			if (!rc)
				*value = SLOT_LATCH(myslot.status);
		}
	}

	ibmphp_unlock_operations();
	debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n",
			rc, rc, *value);
	return rc;
}


R
Ryan Desfosses 已提交
323
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
L
Linus Torvalds 已提交
324 325 326 327 328 329 330 331
{
	int rc = -ENODEV;
	struct slot *pslot;
	struct slot myslot;

	debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
					(ulong) hotplug_slot, (ulong) value);
	ibmphp_lock_operations();
332
	if (hotplug_slot) {
L
Linus Torvalds 已提交
333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348
		pslot = hotplug_slot->private;
		if (pslot) {
			memcpy(&myslot, pslot, sizeof(struct slot));
			rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
						&(myslot.status));
			if (!rc)
				*value = SLOT_PWRGD(myslot.status);
		}
	}

	ibmphp_unlock_operations();
	debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n",
			rc, rc, *value);
	return rc;
}

R
Ryan Desfosses 已提交
349
static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value)
L
Linus Torvalds 已提交
350 351 352 353 354 355 356 357 358
{
	int rc = -ENODEV;
	struct slot *pslot;
	u8 present;
	struct slot myslot;

	debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
					(ulong) hotplug_slot, (ulong) value);
	ibmphp_lock_operations();
359
	if (hotplug_slot) {
L
Linus Torvalds 已提交
360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379
		pslot = hotplug_slot->private;
		if (pslot) {
			memcpy(&myslot, pslot, sizeof(struct slot));
			rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
						&(myslot.status));
			if (!rc) {
				present = SLOT_PRESENT(myslot.status);
				if (present == HPC_SLOT_EMPTY)
					*value = 0;
				else
					*value = 1;
			}
		}
	}

	ibmphp_unlock_operations();
	debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value);
	return rc;
}

380
static int get_max_bus_speed(struct slot *slot)
L
Linus Torvalds 已提交
381
{
382
	int rc = 0;
L
Linus Torvalds 已提交
383
	u8 mode = 0;
384 385
	enum pci_bus_speed speed;
	struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
L
Linus Torvalds 已提交
386

387
	debug("%s - Entry slot[%p]\n", __func__, slot);
L
Linus Torvalds 已提交
388 389

	ibmphp_lock_operations();
390
	mode = slot->supported_bus_mode;
391
	speed = slot->supported_speed;
L
Linus Torvalds 已提交
392 393
	ibmphp_unlock_operations();

394 395 396 397
	switch (speed) {
	case BUS_SPEED_33:
		break;
	case BUS_SPEED_66:
398
		if (mode == BUS_MODE_PCIX)
399 400 401 402 403 404 405 406 407
			speed += 0x01;
		break;
	case BUS_SPEED_100:
	case BUS_SPEED_133:
		speed += 0x01;
		break;
	default:
		/* Note (will need to change): there would be soon 256, 512 also */
		rc = -ENODEV;
L
Linus Torvalds 已提交
408 409
	}

410 411 412 413
	if (!rc)
		bus->max_bus_speed = speed;

	debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
L
Linus Torvalds 已提交
414 415 416 417
	return rc;
}

/*
R
Ryan Desfosses 已提交
418
static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 *value, u8 flag)
L
Linus Torvalds 已提交
419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
{
	int rc = -ENODEV;
	struct slot *pslot;
	struct slot myslot;

	debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n",
						(ulong)hotplug_slot, (ulong) value);

	if (flag)
		ibmphp_lock_operations();

	if (hotplug_slot && value) {
		pslot = hotplug_slot->private;
		if (pslot) {
			memcpy(&myslot, pslot, sizeof(struct slot));
			rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
						&(myslot.status));

			if (!(SLOT_LATCH (myslot.status)) &&
					(SLOT_PRESENT (myslot.status))) {
				rc = ibmphp_hpc_readslot(pslot,
						READ_EXTSLOTSTATUS,
						&(myslot.ext_status));
				if (!rc)
					*value = SLOT_SPEED(myslot.ext_status);
			} else
				*value = MAX_ADAPTER_NONE;
B
Bogicevic Sasa 已提交
446
		}
L
Linus Torvalds 已提交
447 448 449 450 451 452 453 454 455
	}

	if (flag)
		ibmphp_unlock_operations();

	debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value);
	return rc;
}

R
Ryan Desfosses 已提交
456
static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value)
L
Linus Torvalds 已提交
457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490
{
	int rc = -ENODEV;
	struct slot *pslot = NULL;

	debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot);

	ibmphp_lock_operations();

	if (hotplug_slot) {
		pslot = hotplug_slot->private;
		if (pslot) {
			rc = 0;
			snprintf(value, 100, "Bus %x", pslot->bus);
		}
	} else
		rc = -ENODEV;

	ibmphp_unlock_operations();
	debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
	return rc;
}
*/

/****************************************************************************
 * This routine will initialize the ops data structure used in the validate
 * function. It will also power off empty slots that are powered on since BIOS
 * leaves those on, albeit disconnected
 ****************************************************************************/
static int __init init_ops(void)
{
	struct slot *slot_cur;
	int retval;
	int rc;

491
	list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
L
Linus Torvalds 已提交
492 493
		debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
							slot_cur->number);
494
		if (slot_cur->ctrl->revision == 0xFF)
L
Linus Torvalds 已提交
495 496 497 498
			if (get_ctrl_revision(slot_cur,
						&slot_cur->ctrl->revision))
				return -1;

499 500
		if (slot_cur->bus_on->current_speed == 0xFF)
			if (get_cur_bus_info(&slot_cur))
L
Linus Torvalds 已提交
501
				return -1;
502
		get_max_bus_speed(slot_cur);
L
Linus Torvalds 已提交
503 504 505 506 507 508 509 510 511 512 513 514 515 516 517

		if (slot_cur->ctrl->options == 0xFF)
			if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
				return -1;

		retval = slot_update(&slot_cur);
		if (retval)
			return retval;

		debug("status = %x\n", slot_cur->status);
		debug("ext_status = %x\n", slot_cur->ext_status);
		debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status));
		debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
		debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));

518 519
		if ((SLOT_PWRGD(slot_cur->status)) &&
		    !(SLOT_PRESENT(slot_cur->status)) &&
L
Linus Torvalds 已提交
520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559
		    !(SLOT_LATCH(slot_cur->status))) {
			debug("BEFORE POWER OFF COMMAND\n");
				rc = power_off(slot_cur);
				if (rc)
					return rc;

	/*		retval = slot_update(&slot_cur);
	 *		if (retval)
	 *			return retval;
	 *		ibmphp_update_slot_info(slot_cur);
	 */
		}
	}
	init_flag = 0;
	return 0;
}

/* This operation will check whether the slot is within the bounds and
 * the operation is valid to perform on that slot
 * Parameters: slot, operation
 * Returns: 0 or error codes
 */
static int validate(struct slot *slot_cur, int opn)
{
	int number;
	int retval;

	if (!slot_cur)
		return -ENODEV;
	number = slot_cur->number;
	if ((number > max_slots) || (number < 0))
		return -EBADSLT;
	debug("slot_number in validate is %d\n", slot_cur->number);

	retval = slot_update(&slot_cur);
	if (retval)
		return retval;

	switch (opn) {
		case ENABLE:
560 561
			if (!(SLOT_PWRGD(slot_cur->status)) &&
			     (SLOT_PRESENT(slot_cur->status)) &&
L
Linus Torvalds 已提交
562 563 564 565
			     !(SLOT_LATCH(slot_cur->status)))
				return 0;
			break;
		case DISABLE:
566
			if ((SLOT_PWRGD(slot_cur->status)) &&
L
Linus Torvalds 已提交
567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585
			    (SLOT_PRESENT(slot_cur->status)) &&
			    !(SLOT_LATCH(slot_cur->status)))
				return 0;
			break;
		default:
			break;
	}
	err("validate failed....\n");
	return -EINVAL;
}

/****************************************************************************
 * This routine is for updating the data structures in the hotplug core
 * Parameters: struct slot
 * Returns: 0 or error
 ****************************************************************************/
int ibmphp_update_slot_info(struct slot *slot_cur)
{
	struct hotplug_slot_info *info;
586
	struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
L
Linus Torvalds 已提交
587 588 589 590 591
	int rc;
	u8 bus_speed;
	u8 mode;

	info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
592
	if (!info)
L
Linus Torvalds 已提交
593
		return -ENOMEM;
594

L
Linus Torvalds 已提交
595 596 597 598
	info->power_status = SLOT_PWRGD(slot_cur->status);
	info->attention_status = SLOT_ATTN(slot_cur->status,
						slot_cur->ext_status);
	info->latch_status = SLOT_LATCH(slot_cur->status);
B
Bogicevic Sasa 已提交
599 600
	if (!SLOT_PRESENT(slot_cur->status)) {
		info->adapter_status = 0;
L
Linus Torvalds 已提交
601 602
/*		info->max_adapter_speed_status = MAX_ADAPTER_NONE; */
	} else {
B
Bogicevic Sasa 已提交
603
		info->adapter_status = 1;
L
Linus Torvalds 已提交
604 605 606 607 608 609 610 611 612 613 614
/*		get_max_adapter_speed_1(slot_cur->hotplug_slot,
					&info->max_adapter_speed_status, 0); */
	}

	bus_speed = slot_cur->bus_on->current_speed;
	mode = slot_cur->bus_on->current_bus_mode;

	switch (bus_speed) {
		case BUS_SPEED_33:
			break;
		case BUS_SPEED_66:
615
			if (mode == BUS_MODE_PCIX)
L
Linus Torvalds 已提交
616 617 618 619 620 621 622 623 624 625 626 627 628 629
				bus_speed += 0x01;
			else if (mode == BUS_MODE_PCI)
				;
			else
				bus_speed = PCI_SPEED_UNKNOWN;
			break;
		case BUS_SPEED_100:
		case BUS_SPEED_133:
			bus_speed += 0x01;
			break;
		default:
			bus_speed = PCI_SPEED_UNKNOWN;
	}

630
	bus->cur_bus_speed = bus_speed;
631 632
	// To do: bus_names

L
Linus Torvalds 已提交
633 634 635 636 637 638 639 640 641 642 643 644 645 646 647
	rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
	kfree(info);
	return rc;
}


/******************************************************************************
 * This function will return the pci_func, given bus and devfunc, or NULL.  It
 * is called from visit routines
 ******************************************************************************/

static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function)
{
	struct pci_func *func_cur;
	struct slot *slot_cur;
648
	list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
L
Linus Torvalds 已提交
649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669
		if (slot_cur->func) {
			func_cur = slot_cur->func;
			while (func_cur) {
				if ((func_cur->busno == busno) &&
						(func_cur->device == device) &&
						(func_cur->function == function))
					return func_cur;
				func_cur = func_cur->next;
			}
		}
	}
	return NULL;
}

/*************************************************************
 * This routine frees up memory used by struct slot, including
 * the pointers to pci_func, bus, hotplug_slot, controller,
 * and deregistering from the hotplug core
 *************************************************************/
static void free_slots(void)
{
670
	struct slot *slot_cur, *next;
L
Linus Torvalds 已提交
671

672
	debug("%s -- enter\n", __func__);
L
Linus Torvalds 已提交
673

674 675
	list_for_each_entry_safe(slot_cur, next, &ibmphp_slot_head,
				 ibm_slot_list) {
676 677 678 679 680 681 682 683 684 685 686 687 688 689
		pci_hp_del(slot_cur->hotplug_slot);
		slot_cur->ctrl = NULL;
		slot_cur->bus_on = NULL;

		/*
		 * We don't want to actually remove the resources,
		 * since ibmphp_free_resources() will do just that.
		 */
		ibmphp_unconfigure_card(&slot_cur, -1);

		pci_hp_destroy(slot_cur->hotplug_slot);
		kfree(slot_cur->hotplug_slot->info);
		kfree(slot_cur->hotplug_slot);
		kfree(slot_cur);
L
Linus Torvalds 已提交
690
	}
691
	debug("%s -- exit\n", __func__);
L
Linus Torvalds 已提交
692 693 694 695 696 697 698
}

static void ibm_unconfigure_device(struct pci_func *func)
{
	struct pci_dev *temp;
	u8 j;

699
	debug("inside %s\n", __func__);
L
Linus Torvalds 已提交
700 701 702 703
	debug("func->device = %x, func->function = %x\n",
					func->device, func->function);
	debug("func->device << 3 | 0x0  = %x\n", func->device << 3 | 0x0);

704 705
	pci_lock_rescan_remove();

L
Linus Torvalds 已提交
706
	for (j = 0; j < 0x08; j++) {
707 708
		temp = pci_get_domain_bus_and_slot(0, func->busno,
						   (func->device << 3) | j);
709
		if (temp) {
710
			pci_stop_and_remove_bus_device(temp);
711 712
			pci_dev_put(temp);
		}
L
Linus Torvalds 已提交
713
	}
714

715
	pci_dev_put(func->dev);
716 717

	pci_unlock_rescan_remove();
L
Linus Torvalds 已提交
718 719 720
}

/*
721 722
 * The following function is to fix kernel bug regarding
 * getting bus entries, here we manually add those primary
L
Linus Torvalds 已提交
723 724 725 726
 * bus entries to kernel bus structure whenever apply
 */
static u8 bus_structure_fixup(u8 busno)
{
727
	struct pci_bus *bus, *b;
L
Linus Torvalds 已提交
728 729 730 731 732 733 734
	struct pci_dev *dev;
	u16 l;

	if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno)))
		return 1;

	bus = kmalloc(sizeof(*bus), GFP_KERNEL);
735
	if (!bus)
L
Linus Torvalds 已提交
736
		return 1;
737

L
Linus Torvalds 已提交
738 739 740 741 742 743 744 745 746 747 748 749
	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
	if (!dev) {
		kfree(bus);
		return 1;
	}

	bus->number = busno;
	bus->ops = ibmphp_pci_bus->ops;
	dev->bus = bus;
	for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) {
		if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) &&
					(l != 0x0000) && (l != 0xffff)) {
M
Masanari Iida 已提交
750
			debug("%s - Inside bus_structure_fixup()\n",
751
							__func__);
752 753 754 755 756
			b = pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL);
			if (!b)
				continue;

			pci_bus_add_devices(b);
L
Linus Torvalds 已提交
757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773
			break;
		}
	}

	kfree(dev);
	kfree(bus);

	return 0;
}

static int ibm_configure_device(struct pci_func *func)
{
	struct pci_bus *child;
	int num;
	int flag = 0;	/* this is to make sure we don't double scan the bus,
					for bridged devices primarily */

774 775
	pci_lock_rescan_remove();

L
Linus Torvalds 已提交
776 777 778
	if (!(bus_structure_fixup(func->busno)))
		flag = 1;
	if (func->dev == NULL)
779
		func->dev = pci_get_domain_bus_and_slot(0, func->busno,
L
Linus Torvalds 已提交
780 781 782 783 784
				PCI_DEVFN(func->device, func->function));

	if (func->dev == NULL) {
		struct pci_bus *bus = pci_find_bus(0, func->busno);
		if (!bus)
785
			goto out;
L
Linus Torvalds 已提交
786 787 788 789 790 791

		num = pci_scan_slot(bus,
				PCI_DEVFN(func->device, func->function));
		if (num)
			pci_bus_add_devices(bus);

792
		func->dev = pci_get_domain_bus_and_slot(0, func->busno,
L
Linus Torvalds 已提交
793 794 795
				PCI_DEVFN(func->device, func->function));
		if (func->dev == NULL) {
			err("ERROR... : pci_dev still NULL\n");
796
			goto out;
L
Linus Torvalds 已提交
797 798 799
		}
	}
	if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
800 801 802 803
		pci_hp_add_bridge(func->dev);
		child = func->dev->subordinate;
		if (child)
			pci_bus_add_devices(child);
L
Linus Torvalds 已提交
804 805
	}

806 807
 out:
	pci_unlock_rescan_remove();
L
Linus Torvalds 已提交
808 809 810 811
	return 0;
}

/*******************************************************
812
 * Returns whether the bus is empty or not
L
Linus Torvalds 已提交
813
 *******************************************************/
R
Ryan Desfosses 已提交
814
static int is_bus_empty(struct slot *slot_cur)
L
Linus Torvalds 已提交
815 816
{
	int rc;
R
Ryan Desfosses 已提交
817
	struct slot *tmp_slot;
L
Linus Torvalds 已提交
818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839
	u8 i = slot_cur->bus_on->slot_min;

	while (i <= slot_cur->bus_on->slot_max) {
		if (i == slot_cur->number) {
			i++;
			continue;
		}
		tmp_slot = ibmphp_get_slot_from_physical_num(i);
		if (!tmp_slot)
			return 0;
		rc = slot_update(&tmp_slot);
		if (rc)
			return 0;
		if (SLOT_PRESENT(tmp_slot->status) &&
					SLOT_PWRGD(tmp_slot->status))
			return 0;
		i++;
	}
	return 1;
}

/***********************************************************
840
 * If the HPC permits and the bus currently empty, tries to set the
L
Linus Torvalds 已提交
841 842 843 844
 * bus speed and mode at the maximum card and bus capability
 * Parameters: slot
 * Returns: bus is set (0) or error code
 ***********************************************************/
R
Ryan Desfosses 已提交
845
static int set_bus(struct slot *slot_cur)
L
Linus Torvalds 已提交
846 847 848 849 850
{
	int rc;
	u8 speed;
	u8 cmd = 0x0;
	int retval;
851
	static const struct pci_device_id ciobx[] = {
L
Linus Torvalds 已提交
852
		{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
B
Bogicevic Sasa 已提交
853
		{ },
854
	};
L
Linus Torvalds 已提交
855

856
	debug("%s - entry slot # %d\n", __func__, slot_cur->number);
L
Linus Torvalds 已提交
857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874
	if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
		rc = slot_update(&slot_cur);
		if (rc)
			return rc;
		speed = SLOT_SPEED(slot_cur->ext_status);
		debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed);
		switch (speed) {
		case HPC_SLOT_SPEED_33:
			cmd = HPC_BUS_33CONVMODE;
			break;
		case HPC_SLOT_SPEED_66:
			if (SLOT_PCIX(slot_cur->ext_status)) {
				if ((slot_cur->supported_speed >= BUS_SPEED_66) &&
						(slot_cur->supported_bus_mode == BUS_MODE_PCIX))
					cmd = HPC_BUS_66PCIXMODE;
				else if (!SLOT_BUS_MODE(slot_cur->ext_status))
					/* if max slot/bus capability is 66 pci
					and there's no bus mode mismatch, then
875
					the adapter supports 66 pci */
L
Linus Torvalds 已提交
876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927
					cmd = HPC_BUS_66CONVMODE;
				else
					cmd = HPC_BUS_33CONVMODE;
			} else {
				if (slot_cur->supported_speed >= BUS_SPEED_66)
					cmd = HPC_BUS_66CONVMODE;
				else
					cmd = HPC_BUS_33CONVMODE;
			}
			break;
		case HPC_SLOT_SPEED_133:
			switch (slot_cur->supported_speed) {
			case BUS_SPEED_33:
				cmd = HPC_BUS_33CONVMODE;
				break;
			case BUS_SPEED_66:
				if (slot_cur->supported_bus_mode == BUS_MODE_PCIX)
					cmd = HPC_BUS_66PCIXMODE;
				else
					cmd = HPC_BUS_66CONVMODE;
				break;
			case BUS_SPEED_100:
				cmd = HPC_BUS_100PCIXMODE;
				break;
			case BUS_SPEED_133:
				/* This is to take care of the bug in CIOBX chip */
				if (pci_dev_present(ciobx))
					ibmphp_hpc_writeslot(slot_cur,
							HPC_BUS_100PCIXMODE);
				cmd = HPC_BUS_133PCIXMODE;
				break;
			default:
				err("Wrong bus speed\n");
				return -ENODEV;
			}
			break;
		default:
			err("wrong slot speed\n");
			return -ENODEV;
		}
		debug("setting bus speed for slot %d, cmd %x\n",
						slot_cur->number, cmd);
		retval = ibmphp_hpc_writeslot(slot_cur, cmd);
		if (retval) {
			err("setting bus speed failed\n");
			return retval;
		}
		if (CTLR_RESULT(slot_cur->ctrl->status)) {
			err("command not completed successfully in set_bus\n");
			return -EIO;
		}
	}
928
	/* This is for x440, once Brandon fixes the firmware,
L
Linus Torvalds 已提交
929 930
	will not need this delay */
	msleep(1000);
931
	debug("%s -Exit\n", __func__);
L
Linus Torvalds 已提交
932 933 934 935
	return 0;
}

/* This routine checks the bus limitations that the slot is on from the BIOS.
936
 * This is used in deciding whether or not to power up the slot.
L
Linus Torvalds 已提交
937
 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
938
 * same bus)
L
Linus Torvalds 已提交
939 940 941 942 943 944
 * Parameters: slot
 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
 */
static int check_limitations(struct slot *slot_cur)
{
	u8 i;
R
Ryan Desfosses 已提交
945
	struct slot *tmp_slot;
L
Linus Torvalds 已提交
946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983
	u8 count = 0;
	u8 limitation = 0;

	for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
		tmp_slot = ibmphp_get_slot_from_physical_num(i);
		if (!tmp_slot)
			return -ENODEV;
		if ((SLOT_PWRGD(tmp_slot->status)) &&
					!(SLOT_CONNECT(tmp_slot->status)))
			count++;
	}
	get_cur_bus_info(&slot_cur);
	switch (slot_cur->bus_on->current_speed) {
	case BUS_SPEED_33:
		limitation = slot_cur->bus_on->slots_at_33_conv;
		break;
	case BUS_SPEED_66:
		if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
			limitation = slot_cur->bus_on->slots_at_66_pcix;
		else
			limitation = slot_cur->bus_on->slots_at_66_conv;
		break;
	case BUS_SPEED_100:
		limitation = slot_cur->bus_on->slots_at_100_pcix;
		break;
	case BUS_SPEED_133:
		limitation = slot_cur->bus_on->slots_at_133_pcix;
		break;
	}

	if ((count + 1) > limitation)
		return -EINVAL;
	return 0;
}

static inline void print_card_capability(struct slot *slot_cur)
{
	info("capability of the card is ");
984
	if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
L
Linus Torvalds 已提交
985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011
		info("   133 MHz PCI-X\n");
	else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
		info("    66 MHz PCI-X\n");
	else if ((slot_cur->ext_status & CARD_INFO) == PCI66)
		info("    66 MHz PCI\n");
	else
		info("    33 MHz PCI\n");

}

/* This routine will power on the slot, configure the device(s) and find the
 * drivers for them.
 * Parameters: hotplug_slot
 * Returns: 0 or failure codes
 */
static int enable_slot(struct hotplug_slot *hs)
{
	int rc, i, rcpr;
	struct slot *slot_cur;
	u8 function;
	struct pci_func *tmp_func;

	ibmphp_lock_operations();

	debug("ENABLING SLOT........\n");
	slot_cur = hs->private;

1012 1013
	rc = validate(slot_cur, ENABLE);
	if (rc) {
L
Linus Torvalds 已提交
1014 1015 1016 1017 1018
		err("validate function failed\n");
		goto error_nopower;
	}

	attn_LED_blink(slot_cur);
1019

L
Linus Torvalds 已提交
1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034
	rc = set_bus(slot_cur);
	if (rc) {
		err("was not able to set the bus\n");
		goto error_nopower;
	}

	/*-----------------debugging------------------------------*/
	get_cur_bus_info(&slot_cur);
	debug("the current bus speed right after set_bus = %x\n",
					slot_cur->bus_on->current_speed);
	/*----------------------------------------------------------*/

	rc = check_limitations(slot_cur);
	if (rc) {
		err("Adding this card exceeds the limitations of this bus.\n");
1035
		err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n");
L
Linus Torvalds 已提交
1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058
		err("Try hot-adding into another bus\n");
		rc = -EINVAL;
		goto error_nopower;
	}

	rc = power_on(slot_cur);

	if (rc) {
		err("something wrong when powering up... please see below for details\n");
		/* need to turn off before on, otherwise, blinking overwrites */
		attn_off(slot_cur);
		attn_on(slot_cur);
		if (slot_update(&slot_cur)) {
			attn_off(slot_cur);
			attn_on(slot_cur);
			rc = -ENODEV;
			goto exit;
		}
		/* Check to see the error of why it failed */
		if ((SLOT_POWER(slot_cur->status)) &&
					!(SLOT_PWRGD(slot_cur->status)))
			err("power fault occurred trying to power up\n");
		else if (SLOT_BUS_SPEED(slot_cur->status)) {
1059
			err("bus speed mismatch occurred.  please check current bus speed and card capability\n");
L
Linus Torvalds 已提交
1060 1061
			print_card_capability(slot_cur);
		} else if (SLOT_BUS_MODE(slot_cur->ext_status)) {
1062
			err("bus mode mismatch occurred.  please check current bus mode and card capability\n");
L
Linus Torvalds 已提交
1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077
			print_card_capability(slot_cur);
		}
		ibmphp_update_slot_info(slot_cur);
		goto exit;
	}
	debug("after power_on\n");
	/*-----------------------debugging---------------------------*/
	get_cur_bus_info(&slot_cur);
	debug("the current bus speed right after power_on = %x\n",
					slot_cur->bus_on->current_speed);
	/*----------------------------------------------------------*/

	rc = slot_update(&slot_cur);
	if (rc)
		goto error_power;
1078

L
Linus Torvalds 已提交
1079 1080 1081 1082 1083 1084
	rc = -EINVAL;
	if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
		err("power fault occurred trying to power up...\n");
		goto error_power;
	}
	if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) {
1085
		err("bus speed mismatch occurred.  please check current bus speed and card capability\n");
L
Linus Torvalds 已提交
1086 1087
		print_card_capability(slot_cur);
		goto error_power;
1088
	}
L
Linus Torvalds 已提交
1089 1090 1091 1092 1093 1094 1095
	/* Don't think this case will happen after above checks...
	 * but just in case, for paranoia sake */
	if (!(SLOT_POWER(slot_cur->status))) {
		err("power on failed...\n");
		goto error_power;
	}

1096
	slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
L
Linus Torvalds 已提交
1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137
	if (!slot_cur->func) {
		/* We cannot do update_slot_info here, since no memory for
		 * kmalloc n.e.ways, and update_slot_info allocates some */
		rc = -ENOMEM;
		goto error_power;
	}
	slot_cur->func->busno = slot_cur->bus;
	slot_cur->func->device = slot_cur->device;
	for (i = 0; i < 4; i++)
		slot_cur->func->irq[i] = slot_cur->irq[i];

	debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n",
					slot_cur->bus, slot_cur->device);

	if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) {
		err("configure_card was unsuccessful...\n");
		/* true because don't need to actually deallocate resources,
		 * just remove references */
		ibmphp_unconfigure_card(&slot_cur, 1);
		debug("after unconfigure_card\n");
		slot_cur->func = NULL;
		rc = -ENOMEM;
		goto error_power;
	}

	function = 0x00;
	do {
		tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device,
							function++);
		if (tmp_func && !(tmp_func->dev))
			ibm_configure_device(tmp_func);
	} while (tmp_func);

	attn_off(slot_cur);
	if (slot_update(&slot_cur)) {
		rc = -EFAULT;
		goto exit;
	}
	ibmphp_print_test();
	rc = ibmphp_update_slot_info(slot_cur);
exit:
1138
	ibmphp_unlock_operations();
L
Linus Torvalds 已提交
1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167
	return rc;

error_nopower:
	attn_off(slot_cur);	/* need to turn off if was blinking b4 */
	attn_on(slot_cur);
error_cont:
	rcpr = slot_update(&slot_cur);
	if (rcpr) {
		rc = rcpr;
		goto exit;
	}
	ibmphp_update_slot_info(slot_cur);
	goto exit;

error_power:
	attn_off(slot_cur);	/* need to turn off if was blinking b4 */
	attn_on(slot_cur);
	rcpr = power_off(slot_cur);
	if (rcpr) {
		rc = rcpr;
		goto exit;
	}
	goto error_cont;
}

/**************************************************************
* HOT REMOVING ADAPTER CARD                                   *
* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE                *
* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE         *
B
Bogicevic Sasa 已提交
1168
*		DISABLE POWER ,                               *
L
Linus Torvalds 已提交
1169 1170 1171 1172 1173
**************************************************************/
static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot)
{
	struct slot *slot = hotplug_slot->private;
	int rc;
1174

L
Linus Torvalds 已提交
1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185
	ibmphp_lock_operations();
	rc = ibmphp_do_disable_slot(slot);
	ibmphp_unlock_operations();
	return rc;
}

int ibmphp_do_disable_slot(struct slot *slot_cur)
{
	int rc;
	u8 flag;

1186 1187
	debug("DISABLING SLOT...\n");

1188
	if ((slot_cur == NULL) || (slot_cur->ctrl == NULL))
L
Linus Torvalds 已提交
1189
		return -ENODEV;
1190

L
Linus Torvalds 已提交
1191
	flag = slot_cur->flag;
1192
	slot_cur->flag = 1;
L
Linus Torvalds 已提交
1193

1194
	if (flag == 1) {
L
Linus Torvalds 已提交
1195 1196 1197 1198 1199 1200 1201 1202
		rc = validate(slot_cur, DISABLE);
			/* checking if powered off already & valid slot # */
		if (rc)
			goto error;
	}
	attn_LED_blink(slot_cur);

	if (slot_cur->func == NULL) {
1203
		/* We need this for functions that were there on bootup */
1204
		slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
L
Linus Torvalds 已提交
1205 1206 1207 1208 1209 1210 1211 1212 1213
		if (!slot_cur->func) {
			rc = -ENOMEM;
			goto error;
		}
		slot_cur->func->busno = slot_cur->bus;
		slot_cur->func->device = slot_cur->device;
	}

	ibm_unconfigure_device(slot_cur->func);
1214 1215 1216 1217 1218 1219 1220

	/*
	 * If we got here from latch suddenly opening on operating card or
	 * a power fault, there's no power to the card, so cannot
	 * read from it to determine what resources it occupied.  This operation
	 * is forbidden anyhow.  The best we can do is remove it from kernel
	 * lists at least */
L
Linus Torvalds 已提交
1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256

	if (!flag) {
		attn_off(slot_cur);
		return 0;
	}

	rc = ibmphp_unconfigure_card(&slot_cur, 0);
	slot_cur->func = NULL;
	debug("in disable_slot. after unconfigure_card\n");
	if (rc) {
		err("could not unconfigure card.\n");
		goto error;
	}

	rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF);
	if (rc)
		goto error;

	attn_off(slot_cur);
	rc = slot_update(&slot_cur);
	if (rc)
		goto exit;

	rc = ibmphp_update_slot_info(slot_cur);
	ibmphp_print_test();
exit:
	return rc;

error:
	/*  Need to turn off if was blinking b4 */
	attn_off(slot_cur);
	attn_on(slot_cur);
	if (slot_update(&slot_cur)) {
		rc = -EFAULT;
		goto exit;
	}
1257
	if (flag)
L
Linus Torvalds 已提交
1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321
		ibmphp_update_slot_info(slot_cur);
	goto exit;
}

struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
	.set_attention_status =		set_attention_status,
	.enable_slot =			enable_slot,
	.disable_slot =			ibmphp_disable_slot,
	.hardware_test =		NULL,
	.get_power_status =		get_power_status,
	.get_attention_status =		get_attention_status,
	.get_latch_status =		get_latch_status,
	.get_adapter_status =		get_adapter_present,
/*	.get_max_adapter_speed =	get_max_adapter_speed,
	.get_bus_name_status =		get_bus_name,
*/
};

static void ibmphp_unload(void)
{
	free_slots();
	debug("after slots\n");
	ibmphp_free_resources();
	debug("after resources\n");
	ibmphp_free_bus_info_queue();
	debug("after bus info\n");
	ibmphp_free_ebda_hpc_queue();
	debug("after ebda hpc\n");
	ibmphp_free_ebda_pci_rsrc_queue();
	debug("after ebda pci rsrc\n");
	kfree(ibmphp_pci_bus);
}

static int __init ibmphp_init(void)
{
	struct pci_bus *bus;
	int i = 0;
	int rc = 0;

	init_flag = 1;

	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");

	ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL);
	if (!ibmphp_pci_bus) {
		rc = -ENOMEM;
		goto exit;
	}

	bus = pci_find_bus(0, 0);
	if (!bus) {
		err("Can't find the root pci bus, can not continue\n");
		rc = -ENODEV;
		goto error;
	}
	memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus));

	ibmphp_debug = debug;

	ibmphp_hpc_initvars();

	for (i = 0; i < 16; i++)
		irqs[i] = 0;

1322 1323
	rc = ibmphp_access_ebda();
	if (rc)
L
Linus Torvalds 已提交
1324 1325 1326
		goto error;
	debug("after ibmphp_access_ebda()\n");

1327 1328
	rc = ibmphp_rsrc_init();
	if (rc)
L
Linus Torvalds 已提交
1329 1330 1331 1332
		goto error;
	debug("AFTER Resource & EBDA INITIALIZATIONS\n");

	max_slots = get_max_slots();
1333

1334 1335
	rc = ibmphp_register_pci();
	if (rc)
L
Linus Torvalds 已提交
1336 1337 1338 1339 1340 1341 1342 1343
		goto error;

	if (init_ops()) {
		rc = -ENODEV;
		goto error;
	}

	ibmphp_print_test();
1344 1345
	rc = ibmphp_hpc_start_poll_thread();
	if (rc)
L
Linus Torvalds 已提交
1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364
		goto error;

exit:
	return rc;

error:
	ibmphp_unload();
	goto exit;
}

static void __exit ibmphp_exit(void)
{
	ibmphp_hpc_stop_poll_thread();
	debug("after polling\n");
	ibmphp_unload();
	debug("done\n");
}

module_init(ibmphp_init);
1365
module_exit(ibmphp_exit);