ide-io.c 42.8 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
/*
 *	IDE I/O functions
 *
 *	Basic PIO and command management functionality.
 *
 * This code was split off from ide.c. See ide.c for history and original
 * copyrights.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * For the avoidance of doubt the "preferred form" of this code is one which
 * is in an open non patent encumbered format. Where cryptographic key signing
 * forms part of the process of creating an executable the information
 * including keys needed to generate an equivalently functional executable
 * are deemed to be part of the source code.
 */
 
 
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/blkpg.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
43
#include <linux/hdreg.h>
L
Linus Torvalds 已提交
44 45 46 47 48 49 50
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/kmod.h>
#include <linux/scatterlist.h>
J
Jiri Slaby 已提交
51
#include <linux/bitops.h>
L
Linus Torvalds 已提交
52 53 54 55 56 57

#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/io.h>

58
static int __ide_end_request(ide_drive_t *drive, struct request *rq,
59
			     int uptodate, unsigned int nr_bytes, int dequeue)
L
Linus Torvalds 已提交
60 61
{
	int ret = 1;
62 63 64 65
	int error = 0;

	if (uptodate <= 0)
		error = uptodate ? uptodate : -EIO;
L
Linus Torvalds 已提交
66 67 68 69 70

	/*
	 * if failfast is set on a request, override number of sectors and
	 * complete the whole request right now
	 */
71
	if (blk_noretry_request(rq) && error)
72
		nr_bytes = rq->hard_nr_sectors << 9;
L
Linus Torvalds 已提交
73

74
	if (!blk_fs_request(rq) && error && !rq->errors)
L
Linus Torvalds 已提交
75 76 77 78 79 80
		rq->errors = -EIO;

	/*
	 * decide whether to reenable DMA -- 3 is a random magic for now,
	 * if we DMA timeout more than 3 times, just stay in PIO
	 */
81 82 83
	if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
	    drive->retry_pio <= 3) {
		drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
84
		ide_dma_on(drive);
L
Linus Torvalds 已提交
85 86
	}

87 88
	if (!__blk_end_request(rq, error, nr_bytes)) {
		if (dequeue)
89
			HWGROUP(drive)->rq = NULL;
L
Linus Torvalds 已提交
90 91
		ret = 0;
	}
92

L
Linus Torvalds 已提交
93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
	return ret;
}

/**
 *	ide_end_request		-	complete an IDE I/O
 *	@drive: IDE device for the I/O
 *	@uptodate:
 *	@nr_sectors: number of sectors completed
 *
 *	This is our end_request wrapper function. We complete the I/O
 *	update random number input and dequeue the request, which if
 *	it was tagged may be out of order.
 */

int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
109
	unsigned int nr_bytes = nr_sectors << 9;
L
Linus Torvalds 已提交
110 111 112 113
	struct request *rq;
	unsigned long flags;
	int ret = 1;

114 115 116 117
	/*
	 * room for locking improvements here, the calls below don't
	 * need the queue lock held at all
	 */
L
Linus Torvalds 已提交
118 119 120
	spin_lock_irqsave(&ide_lock, flags);
	rq = HWGROUP(drive)->rq;

121 122 123 124 125 126
	if (!nr_bytes) {
		if (blk_pc_request(rq))
			nr_bytes = rq->data_len;
		else
			nr_bytes = rq->hard_cur_sectors << 9;
	}
L
Linus Torvalds 已提交
127

128
	ret = __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
L
Linus Torvalds 已提交
129 130 131 132 133 134 135 136

	spin_unlock_irqrestore(&ide_lock, flags);
	return ret;
}
EXPORT_SYMBOL(ide_end_request);

static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
137
	struct request_pm_state *pm = rq->data;
138

L
Linus Torvalds 已提交
139 140 141
	if (drive->media != ide_disk)
		return;

142
	switch (pm->pm_step) {
143
	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
144
		if (pm->pm_state == PM_EVENT_FREEZE)
145
			pm->pm_step = IDE_PM_COMPLETED;
L
Linus Torvalds 已提交
146
		else
147
			pm->pm_step = IDE_PM_STANDBY;
L
Linus Torvalds 已提交
148
		break;
149 150
	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
		pm->pm_step = IDE_PM_COMPLETED;
L
Linus Torvalds 已提交
151
		break;
152 153
	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
		pm->pm_step = IDE_PM_IDLE;
154
		break;
155 156
	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
		pm->pm_step = IDE_PM_RESTORE_DMA;
L
Linus Torvalds 已提交
157 158 159 160 161 162
		break;
	}
}

static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
{
163
	struct request_pm_state *pm = rq->data;
L
Linus Torvalds 已提交
164 165 166 167
	ide_task_t *args = rq->special;

	memset(args, 0, sizeof(*args));

168
	switch (pm->pm_step) {
169
	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
L
Linus Torvalds 已提交
170 171 172
		if (drive->media != ide_disk)
			break;
		/* Not supported? Switch to next step now. */
B
Bartlomiej Zolnierkiewicz 已提交
173 174
		if (ata_id_flush_enabled(drive->id) == 0 ||
		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
L
Linus Torvalds 已提交
175 176 177
			ide_complete_power_step(drive, rq, 0, 0);
			return ide_stopped;
		}
178
		if (ata_id_flush_ext_enabled(drive->id))
179
			args->tf.command = ATA_CMD_FLUSH_EXT;
L
Linus Torvalds 已提交
180
		else
181
			args->tf.command = ATA_CMD_FLUSH;
182
		goto out_do_tf;
183
	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
184
		args->tf.command = ATA_CMD_STANDBYNOW1;
185
		goto out_do_tf;
186
	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
187
		ide_set_max_pio(drive);
188
		/*
189
		 * skip IDE_PM_IDLE for ATAPI devices
190 191
		 */
		if (drive->media != ide_disk)
192
			pm->pm_step = IDE_PM_RESTORE_DMA;
193 194
		else
			ide_complete_power_step(drive, rq, 0, 0);
195
		return ide_stopped;
196
	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
197
		args->tf.command = ATA_CMD_IDLEIMMEDIATE;
198
		goto out_do_tf;
199
	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
L
Linus Torvalds 已提交
200
		/*
201
		 * Right now, all we do is call ide_set_dma(drive),
L
Linus Torvalds 已提交
202 203 204
		 * we could be smarter and check for current xfer_speed
		 * in struct drive etc...
		 */
205
		if (drive->hwif->dma_ops == NULL)
L
Linus Torvalds 已提交
206
			break;
207
		/*
B
Bartlomiej Zolnierkiewicz 已提交
208
		 * TODO: respect IDE_DFLAG_USING_DMA
209
		 */
210
		ide_set_dma(drive);
L
Linus Torvalds 已提交
211 212
		break;
	}
213 214

	pm->pm_step = IDE_PM_COMPLETED;
L
Linus Torvalds 已提交
215
	return ide_stopped;
216 217

out_do_tf:
218
	args->tf_flags	 = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
219
	args->data_phase = TASKFILE_NO_DATA;
220
	return do_rw_taskfile(drive, args);
L
Linus Torvalds 已提交
221 222
}

A
Alan Cox 已提交
223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241
/**
 *	ide_end_dequeued_request	-	complete an IDE I/O
 *	@drive: IDE device for the I/O
 *	@uptodate:
 *	@nr_sectors: number of sectors completed
 *
 *	Complete an I/O that is no longer on the request queue. This
 *	typically occurs when we pull the request and issue a REQUEST_SENSE.
 *	We must still finish the old request but we must not tamper with the
 *	queue in the meantime.
 *
 *	NOTE: This path does not handle barrier, but barrier is not supported
 *	on ide-cd anyway.
 */

int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
			     int uptodate, int nr_sectors)
{
	unsigned long flags;
242
	int ret;
A
Alan Cox 已提交
243 244

	spin_lock_irqsave(&ide_lock, flags);
245
	BUG_ON(!blk_rq_started(rq));
246
	ret = __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
A
Alan Cox 已提交
247
	spin_unlock_irqrestore(&ide_lock, flags);
248

A
Alan Cox 已提交
249 250 251 252 253
	return ret;
}
EXPORT_SYMBOL_GPL(ide_end_dequeued_request);


L
Linus Torvalds 已提交
254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273
/**
 *	ide_complete_pm_request - end the current Power Management request
 *	@drive: target drive
 *	@rq: request
 *
 *	This function cleans up the current PM request and stops the queue
 *	if necessary.
 */
static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
{
	unsigned long flags;

#ifdef DEBUG_PM
	printk("%s: completing PM request, %s\n", drive->name,
	       blk_pm_suspend_request(rq) ? "suspend" : "resume");
#endif
	spin_lock_irqsave(&ide_lock, flags);
	if (blk_pm_suspend_request(rq)) {
		blk_stop_queue(drive->queue);
	} else {
B
Bartlomiej Zolnierkiewicz 已提交
274
		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
L
Linus Torvalds 已提交
275 276 277
		blk_start_queue(drive->queue);
	}
	HWGROUP(drive)->rq = NULL;
278 279
	if (__blk_end_request(rq, 0, 0))
		BUG();
L
Linus Torvalds 已提交
280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305
	spin_unlock_irqrestore(&ide_lock, flags);
}

/**
 *	ide_end_drive_cmd	-	end an explicit drive command
 *	@drive: command 
 *	@stat: status bits
 *	@err: error bits
 *
 *	Clean up after success/failure of an explicit drive command.
 *	These get thrown onto the queue so they are synchronized with
 *	real I/O operations on the drive.
 *
 *	In LBA48 mode we have to read the register set twice to get
 *	all the extra information out.
 */
 
void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
{
	unsigned long flags;
	struct request *rq;

	spin_lock_irqsave(&ide_lock, flags);
	rq = HWGROUP(drive)->rq;
	spin_unlock_irqrestore(&ide_lock, flags);

306
	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
307 308
		ide_task_t *task = (ide_task_t *)rq->special;

L
Linus Torvalds 已提交
309
		if (rq->errors == 0)
310
			rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
311 312 313

		if (task) {
			struct ide_taskfile *tf = &task->tf;
314 315 316

			tf->error = err;
			tf->status = stat;
L
Linus Torvalds 已提交
317

318
			drive->hwif->tp_ops->tf_read(drive, task);
319 320 321

			if (task->tf_flags & IDE_TFLAG_DYN)
				kfree(task);
L
Linus Torvalds 已提交
322 323
		}
	} else if (blk_pm_request(rq)) {
324
		struct request_pm_state *pm = rq->data;
L
Linus Torvalds 已提交
325 326 327 328 329
#ifdef DEBUG_PM
		printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
			drive->name, rq->pm->pm_step, stat, err);
#endif
		ide_complete_power_step(drive, rq, stat, err);
330
		if (pm->pm_step == IDE_PM_COMPLETED)
L
Linus Torvalds 已提交
331 332 333 334 335 336 337
			ide_complete_pm_request(drive, rq);
		return;
	}

	spin_lock_irqsave(&ide_lock, flags);
	HWGROUP(drive)->rq = NULL;
	rq->errors = err;
338 339
	if (unlikely(__blk_end_request(rq, (rq->errors ? -EIO : 0),
				       blk_rq_bytes(rq))))
340
		BUG();
L
Linus Torvalds 已提交
341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360
	spin_unlock_irqrestore(&ide_lock, flags);
}

EXPORT_SYMBOL(ide_end_drive_cmd);

static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
	if (rq->rq_disk) {
		ide_driver_t *drv;

		drv = *(ide_driver_t **)rq->rq_disk->private_data;
		drv->end_request(drive, 0, 0);
	} else
		ide_end_request(drive, 0, 0);
}

static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
	ide_hwif_t *hwif = drive->hwif;

B
Bartlomiej Zolnierkiewicz 已提交
361 362
	if ((stat & ATA_BUSY) ||
	    ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
L
Linus Torvalds 已提交
363 364
		/* other bits are useless when BUSY */
		rq->errors |= ERROR_RESET;
365
	} else if (stat & ATA_ERR) {
L
Linus Torvalds 已提交
366
		/* err has different meaning on cdrom and tape */
367
		if (err == ATA_ABORTED) {
368
			if ((drive->dev_flags & IDE_DFLAG_LBA) &&
369 370
			    /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
			    hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
L
Linus Torvalds 已提交
371 372 373 374
				return ide_stopped;
		} else if ((err & BAD_CRC) == BAD_CRC) {
			/* UDMA crc error, just retry the operation */
			drive->crc_count++;
375
		} else if (err & (ATA_BBK | ATA_UNC)) {
L
Linus Torvalds 已提交
376 377
			/* retries won't help these */
			rq->errors = ERROR_MAX;
378
		} else if (err & ATA_TRK0NF) {
L
Linus Torvalds 已提交
379 380 381 382 383
			/* help it find track zero */
			rq->errors |= ERROR_RECAL;
		}
	}

384
	if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
385 386 387 388 389
	    (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
		int nsect = drive->mult_count ? drive->mult_count : 1;

		ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE);
	}
L
Linus Torvalds 已提交
390

391 392 393 394 395
	if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
		ide_kill_rq(drive, rq);
		return ide_stopped;
	}

396
	if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
397
		rq->errors |= ERROR_RESET;
L
Linus Torvalds 已提交
398

399
	if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
L
Linus Torvalds 已提交
400
		++rq->errors;
401
		return ide_do_reset(drive);
L
Linus Torvalds 已提交
402
	}
403 404 405 406 407 408

	if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
		drive->special.b.recalibrate = 1;

	++rq->errors;

L
Linus Torvalds 已提交
409 410 411 412 413 414 415
	return ide_stopped;
}

static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
	ide_hwif_t *hwif = drive->hwif;

B
Bartlomiej Zolnierkiewicz 已提交
416 417
	if ((stat & ATA_BUSY) ||
	    ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
L
Linus Torvalds 已提交
418 419 420 421 422 423
		/* other bits are useless when BUSY */
		rq->errors |= ERROR_RESET;
	} else {
		/* add decoding error stuff */
	}

424
	if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
L
Linus Torvalds 已提交
425
		/* force an abort */
426
		hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
L
Linus Torvalds 已提交
427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474

	if (rq->errors >= ERROR_MAX) {
		ide_kill_rq(drive, rq);
	} else {
		if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
			++rq->errors;
			return ide_do_reset(drive);
		}
		++rq->errors;
	}

	return ide_stopped;
}

ide_startstop_t
__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
	if (drive->media == ide_disk)
		return ide_ata_error(drive, rq, stat, err);
	return ide_atapi_error(drive, rq, stat, err);
}

EXPORT_SYMBOL_GPL(__ide_error);

/**
 *	ide_error	-	handle an error on the IDE
 *	@drive: drive the error occurred on
 *	@msg: message to report
 *	@stat: status bits
 *
 *	ide_error() takes action based on the error returned by the drive.
 *	For normal I/O that may well include retries. We deal with
 *	both new-style (taskfile) and old style command handling here.
 *	In the case of taskfile command handling there is work left to
 *	do
 */
 
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat)
{
	struct request *rq;
	u8 err;

	err = ide_dump_status(drive, msg, stat);

	if ((rq = HWGROUP(drive)->rq) == NULL)
		return ide_stopped;

	/* retry only "normal" I/O: */
475
	if (!blk_fs_request(rq)) {
L
Linus Torvalds 已提交
476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491
		rq->errors = 1;
		ide_end_drive_cmd(drive, stat, err);
		return ide_stopped;
	}

	if (rq->rq_disk) {
		ide_driver_t *drv;

		drv = *(ide_driver_t **)rq->rq_disk->private_data;
		return drv->error(drive, rq, stat, err);
	} else
		return __ide_error(drive, rq, stat, err);
}

EXPORT_SYMBOL_GPL(ide_error);

492
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
493
{
494 495 496 497
	tf->nsect   = drive->sect;
	tf->lbal    = drive->sect;
	tf->lbam    = drive->cyl;
	tf->lbah    = drive->cyl >> 8;
498
	tf->device  = (drive->head - 1) | drive->select;
499
	tf->command = ATA_CMD_INIT_DEV_PARAMS;
L
Linus Torvalds 已提交
500 501
}

502
static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
503
{
504
	tf->nsect   = drive->sect;
505
	tf->command = ATA_CMD_RESTORE;
L
Linus Torvalds 已提交
506 507
}

508
static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
L
Linus Torvalds 已提交
509
{
510
	tf->nsect   = drive->mult_req;
511
	tf->command = ATA_CMD_SET_MULTI;
L
Linus Torvalds 已提交
512 513 514 515 516 517 518 519
}

static ide_startstop_t ide_disk_special(ide_drive_t *drive)
{
	special_t *s = &drive->special;
	ide_task_t args;

	memset(&args, 0, sizeof(ide_task_t));
520
	args.data_phase = TASKFILE_NO_DATA;
L
Linus Torvalds 已提交
521 522 523

	if (s->b.set_geometry) {
		s->b.set_geometry = 0;
524
		ide_tf_set_specify_cmd(drive, &args.tf);
L
Linus Torvalds 已提交
525 526
	} else if (s->b.recalibrate) {
		s->b.recalibrate = 0;
527
		ide_tf_set_restore_cmd(drive, &args.tf);
L
Linus Torvalds 已提交
528 529
	} else if (s->b.set_multmode) {
		s->b.set_multmode = 0;
530
		ide_tf_set_setmult_cmd(drive, &args.tf);
L
Linus Torvalds 已提交
531 532 533 534 535 536 537
	} else if (s->all) {
		int special = s->all;
		s->all = 0;
		printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
		return ide_stopped;
	}

538
	args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE |
539
			IDE_TFLAG_CUSTOM_HANDLER;
540

L
Linus Torvalds 已提交
541 542 543 544 545 546 547 548 549
	do_rw_taskfile(drive, &args);

	return ide_started;
}

/**
 *	do_special		-	issue some special commands
 *	@drive: drive the command is for
 *
550 551 552 553
 *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
 *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
 *
 *	It used to do much more, but has been scaled back.
L
Linus Torvalds 已提交
554 555 556 557 558 559 560 561 562
 */

static ide_startstop_t do_special (ide_drive_t *drive)
{
	special_t *s = &drive->special;

#ifdef DEBUG
	printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
563 564
	if (drive->media == ide_disk)
		return ide_disk_special(drive);
L
Linus Torvalds 已提交
565

566 567 568
	s->all = 0;
	drive->mult_req = 0;
	return ide_stopped;
L
Linus Torvalds 已提交
569 570 571 572 573 574 575 576 577 578
}

void ide_map_sg(ide_drive_t *drive, struct request *rq)
{
	ide_hwif_t *hwif = drive->hwif;
	struct scatterlist *sg = hwif->sg_table;

	if (hwif->sg_mapped)	/* needed by ide-scsi */
		return;

579
	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
L
Linus Torvalds 已提交
580 581 582 583 584 585 586 587 588 589 590 591 592 593
		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
	} else {
		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
		hwif->sg_nents = 1;
	}
}

EXPORT_SYMBOL_GPL(ide_map_sg);

void ide_init_sg_cmd(ide_drive_t *drive, struct request *rq)
{
	ide_hwif_t *hwif = drive->hwif;

	hwif->nsect = hwif->nleft = rq->nr_sectors;
J
Jens Axboe 已提交
594 595
	hwif->cursg_ofs = 0;
	hwif->cursg = NULL;
L
Linus Torvalds 已提交
596 597 598 599 600 601
}

EXPORT_SYMBOL_GPL(ide_init_sg_cmd);

/**
 *	execute_drive_command	-	issue special drive command
602
 *	@drive: the drive to issue the command on
L
Linus Torvalds 已提交
603 604 605 606 607 608 609 610 611 612 613 614 615
 *	@rq: the request structure holding the command
 *
 *	execute_drive_cmd() issues a special drive command,  usually 
 *	initiated by ioctl() from the external hdparm program. The
 *	command can be a drive command, drive task or taskfile 
 *	operation. Weirdly you can call it with NULL to wait for
 *	all commands to finish. Don't do this as that is due to change
 */

static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
		struct request *rq)
{
	ide_hwif_t *hwif = HWIF(drive);
616
	ide_task_t *task = rq->special;
L
Linus Torvalds 已提交
617

618
	if (task) {
619
		hwif->data_phase = task->data_phase;
L
Linus Torvalds 已提交
620 621 622 623 624 625 626 627 628 629 630

		switch (hwif->data_phase) {
		case TASKFILE_MULTI_OUT:
		case TASKFILE_OUT:
		case TASKFILE_MULTI_IN:
		case TASKFILE_IN:
			ide_init_sg_cmd(drive, rq);
			ide_map_sg(drive, rq);
		default:
			break;
		}
631

632 633 634
		return do_rw_taskfile(drive, task);
	}

L
Linus Torvalds 已提交
635 636 637 638 639 640 641
 	/*
 	 * NULL is actually a valid way of waiting for
 	 * all current requests to be flushed from the queue.
 	 */
#ifdef DEBUG
 	printk("%s: DRIVE_CMD (null)\n", drive->name);
#endif
642
	ide_end_drive_cmd(drive, hwif->tp_ops->read_status(hwif),
643
			  ide_read_error(drive));
644

L
Linus Torvalds 已提交
645 646 647
 	return ide_stopped;
}

648 649 650 651 652 653 654 655 656 657
int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
		       int arg)
{
	struct request_queue *q = drive->queue;
	struct request *rq;
	int ret = 0;

	if (!(setting->flags & DS_SYNC))
		return setting->set(drive, arg);

658
	rq = blk_get_request(q, READ, __GFP_WAIT);
659 660 661 662 663 664 665 666 667 668 669 670 671 672
	rq->cmd_type = REQ_TYPE_SPECIAL;
	rq->cmd_len = 5;
	rq->cmd[0] = REQ_DEVSET_EXEC;
	*(int *)&rq->cmd[1] = arg;
	rq->special = setting->set;

	if (blk_execute_rq(q, NULL, rq, 0))
		ret = rq->errors;
	blk_put_request(rq);

	return ret;
}
EXPORT_SYMBOL_GPL(ide_devset_execute);

673 674
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700
	u8 cmd = rq->cmd[0];

	if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) {
		ide_task_t task;
		struct ide_taskfile *tf = &task.tf;

		memset(&task, 0, sizeof(task));
		if (cmd == REQ_PARK_HEADS) {
			drive->sleep = *(unsigned long *)rq->special;
			drive->dev_flags |= IDE_DFLAG_SLEEPING;
			tf->command = ATA_CMD_IDLEIMMEDIATE;
			tf->feature = 0x44;
			tf->lbal = 0x4c;
			tf->lbam = 0x4e;
			tf->lbah = 0x55;
			task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
		} else		/* cmd == REQ_UNPARK_HEADS */
			tf->command = ATA_CMD_CHK_POWER;

		task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
		task.rq = rq;
		drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA;
		return do_rw_taskfile(drive, &task);
	}

	switch (cmd) {
701 702 703 704 705 706 707 708 709 710 711 712
	case REQ_DEVSET_EXEC:
	{
		int err, (*setfunc)(ide_drive_t *, int) = rq->special;

		err = setfunc(drive, *(int *)&rq->cmd[1]);
		if (err)
			rq->errors = err;
		else
			err = 1;
		ide_end_request(drive, err, 0);
		return ide_stopped;
	}
713 714 715 716 717 718 719 720 721
	case REQ_DRIVE_RESET:
		return ide_do_reset(drive);
	default:
		blk_dump_rq_flags(rq, "ide_special_rq - bad request");
		ide_end_request(drive, 0, 0);
		return ide_stopped;
	}
}

722 723
static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
{
724
	struct request_pm_state *pm = rq->data;
725 726

	if (blk_pm_suspend_request(rq) &&
727
	    pm->pm_step == IDE_PM_START_SUSPEND)
728
		/* Mark drive blocked when starting the suspend sequence. */
B
Bartlomiej Zolnierkiewicz 已提交
729
		drive->dev_flags |= IDE_DFLAG_BLOCKED;
730
	else if (blk_pm_resume_request(rq) &&
731
		 pm->pm_step == IDE_PM_START_RESUME) {
732 733 734 735 736 737 738 739
		/* 
		 * The first thing we do on wakeup is to wait for BSY bit to
		 * go away (with a looong timeout) as a drive on this hwif may
		 * just be POSTing itself.
		 * We do that before even selecting as the "other" device on
		 * the bus may be broken enough to walk on our toes at this
		 * point.
		 */
740
		ide_hwif_t *hwif = drive->hwif;
741 742 743 744
		int rc;
#ifdef DEBUG_PM
		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
#endif
745
		rc = ide_wait_not_busy(hwif, 35000);
746 747 748
		if (rc)
			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
		SELECT_DRIVE(drive);
749
		hwif->tp_ops->set_irq(hwif, 1);
750
		rc = ide_wait_not_busy(hwif, 100000);
751 752 753 754 755
		if (rc)
			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
	}
}

L
Linus Torvalds 已提交
756 757 758 759
/**
 *	start_request	-	start of I/O and command issuing for IDE
 *
 *	start_request() initiates handling of a new I/O request. It
760
 *	accepts commands and I/O (read/write) requests.
L
Linus Torvalds 已提交
761 762 763 764 765 766 767 768
 *
 *	FIXME: this function needs a rename
 */
 
static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
	ide_startstop_t startstop;

769
	BUG_ON(!blk_rq_started(rq));
L
Linus Torvalds 已提交
770 771 772 773 774 775 776 777

#ifdef DEBUG
	printk("%s: start_request: current=0x%08lx\n",
		HWIF(drive)->name, (unsigned long) rq);
#endif

	/* bail early if we've exceeded max_failures */
	if (drive->max_failures && (drive->failures > drive->max_failures)) {
778
		rq->cmd_flags |= REQ_FAILED;
L
Linus Torvalds 已提交
779 780 781
		goto kill_rq;
	}

782 783
	if (blk_pm_request(rq))
		ide_check_pm_state(drive, rq);
L
Linus Torvalds 已提交
784 785

	SELECT_DRIVE(drive);
786 787
	if (ide_wait_stat(&startstop, drive, drive->ready_stat,
			  ATA_BUSY | ATA_DRQ, WAIT_READY)) {
L
Linus Torvalds 已提交
788 789 790 791 792 793
		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
		return startstop;
	}
	if (!drive->special.all) {
		ide_driver_t *drv;

794 795 796 797 798 799 800
		/*
		 * We reset the drive so we need to issue a SETFEATURES.
		 * Do it _after_ do_special() restored device parameters.
		 */
		if (drive->current_speed == 0xff)
			ide_config_drive_speed(drive, drive->desired_speed);

801
		if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
L
Linus Torvalds 已提交
802 803
			return execute_drive_cmd(drive, rq);
		else if (blk_pm_request(rq)) {
804
			struct request_pm_state *pm = rq->data;
L
Linus Torvalds 已提交
805 806 807 808 809 810
#ifdef DEBUG_PM
			printk("%s: start_power_step(step: %d)\n",
				drive->name, rq->pm->pm_step);
#endif
			startstop = ide_start_power_step(drive, rq);
			if (startstop == ide_stopped &&
811
			    pm->pm_step == IDE_PM_COMPLETED)
L
Linus Torvalds 已提交
812 813
				ide_complete_pm_request(drive, rq);
			return startstop;
814 815 816 817 818 819 820 821 822 823
		} else if (!rq->rq_disk && blk_special_request(rq))
			/*
			 * TODO: Once all ULDs have been modified to
			 * check for specific op codes rather than
			 * blindly accepting any special request, the
			 * check for ->rq_disk above may be replaced
			 * by a more suitable mechanism or even
			 * dropped entirely.
			 */
			return ide_special_rq(drive, rq);
L
Linus Torvalds 已提交
824 825

		drv = *(ide_driver_t **)rq->rq_disk->private_data;
826 827

		return drv->do_request(drive, rq, rq->sector);
L
Linus Torvalds 已提交
828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848
	}
	return do_special(drive);
kill_rq:
	ide_kill_rq(drive, rq);
	return ide_stopped;
}

/**
 *	ide_stall_queue		-	pause an IDE device
 *	@drive: drive to stall
 *	@timeout: time to stall for (jiffies)
 *
 *	ide_stall_queue() can be used by a drive to give excess bandwidth back
 *	to the hwgroup by sleeping for timeout jiffies.
 */
 
void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
{
	if (timeout > WAIT_WORSTCASE)
		timeout = WAIT_WORSTCASE;
	drive->sleep = timeout + jiffies;
B
Bartlomiej Zolnierkiewicz 已提交
849
	drive->dev_flags |= IDE_DFLAG_SLEEPING;
L
Linus Torvalds 已提交
850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888
}

EXPORT_SYMBOL(ide_stall_queue);

#define WAKEUP(drive)	((drive)->service_start + 2 * (drive)->service_time)

/**
 *	choose_drive		-	select a drive to service
 *	@hwgroup: hardware group to select on
 *
 *	choose_drive() selects the next drive which will be serviced.
 *	This is necessary because the IDE layer can't issue commands
 *	to both drives on the same cable, unlike SCSI.
 */
 
static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
{
	ide_drive_t *drive, *best;

repeat:	
	best = NULL;
	drive = hwgroup->drive;

	/*
	 * drive is doing pre-flush, ordered write, post-flush sequence. even
	 * though that is 3 requests, it must be seen as a single transaction.
	 * we must not preempt this drive until that is complete
	 */
	if (blk_queue_flushing(drive->queue)) {
		/*
		 * small race where queue could get replugged during
		 * the 3-request flush cycle, just yank the plug since
		 * we want it to finish asap
		 */
		blk_remove_plug(drive->queue);
		return drive;
	}

	do {
B
Bartlomiej Zolnierkiewicz 已提交
889 890 891 892 893 894 895 896
		u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
		u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));

		if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
		    !elv_queue_empty(drive->queue)) {
			if (best == NULL ||
			    (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
			    (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
L
Linus Torvalds 已提交
897 898 899 900 901
				if (!blk_queue_plugged(drive->queue))
					best = drive;
			}
		}
	} while ((drive = drive->next) != hwgroup->drive);
B
Bartlomiej Zolnierkiewicz 已提交
902 903 904 905

	if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
	    (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
	    best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
L
Linus Torvalds 已提交
906 907 908 909 910 911 912 913
		long t = (signed long)(WAKEUP(best) - jiffies);
		if (t >= WAIT_MIN_SLEEP) {
		/*
		 * We *may* have some time to spare, but first let's see if
		 * someone can potentially benefit from our nice mood today..
		 */
			drive = best->next;
			do {
B
Bartlomiej Zolnierkiewicz 已提交
914
				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
L
Linus Torvalds 已提交
915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967
				 && time_before(jiffies - best->service_time, WAKEUP(drive))
				 && time_before(WAKEUP(drive), jiffies + t))
				{
					ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
					goto repeat;
				}
			} while ((drive = drive->next) != best);
		}
	}
	return best;
}

/*
 * Issue a new request to a drive from hwgroup
 * Caller must have already done spin_lock_irqsave(&ide_lock, ..);
 *
 * A hwgroup is a serialized group of IDE interfaces.  Usually there is
 * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
 * may have both interfaces in a single hwgroup to "serialize" access.
 * Or possibly multiple ISA interfaces can share a common IRQ by being grouped
 * together into one hwgroup for serialized access.
 *
 * Note also that several hwgroups can end up sharing a single IRQ,
 * possibly along with many other devices.  This is especially common in
 * PCI-based systems with off-board IDE controller cards.
 *
 * The IDE driver uses the single global ide_lock spinlock to protect
 * access to the request queues, and to protect the hwgroup->busy flag.
 *
 * The first thread into the driver for a particular hwgroup sets the
 * hwgroup->busy flag to indicate that this hwgroup is now active,
 * and then initiates processing of the top request from the request queue.
 *
 * Other threads attempting entry notice the busy setting, and will simply
 * queue their new requests and exit immediately.  Note that hwgroup->busy
 * remains set even when the driver is merely awaiting the next interrupt.
 * Thus, the meaning is "this hwgroup is busy processing a request".
 *
 * When processing of a request completes, the completing thread or IRQ-handler
 * will start the next request from the queue.  If no more work remains,
 * the driver will clear the hwgroup->busy flag and exit.
 *
 * The ide_lock (spinlock) is used to protect all access to the
 * hwgroup->busy flag, but is otherwise not needed for most processing in
 * the driver.  This makes the driver much more friendlier to shared IRQs
 * than previous designs, while remaining 100% (?) SMP safe and capable.
 */
static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
{
	ide_drive_t	*drive;
	ide_hwif_t	*hwif;
	struct request	*rq;
	ide_startstop_t	startstop;
968
	int             loops = 0;
L
Linus Torvalds 已提交
969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984

	/* for atari only: POSSIBLY BROKEN HERE(?) */
	ide_get_lock(ide_intr, hwgroup);

	/* caller must own ide_lock */
	BUG_ON(!irqs_disabled());

	while (!hwgroup->busy) {
		hwgroup->busy = 1;
		drive = choose_drive(hwgroup);
		if (drive == NULL) {
			int sleeping = 0;
			unsigned long sleep = 0; /* shut up, gcc */
			hwgroup->rq = NULL;
			drive = hwgroup->drive;
			do {
B
Bartlomiej Zolnierkiewicz 已提交
985 986 987
				if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
				    (sleeping == 0 ||
				     time_before(drive->sleep, sleep))) {
L
Linus Torvalds 已提交
988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006
					sleeping = 1;
					sleep = drive->sleep;
				}
			} while ((drive = drive->next) != hwgroup->drive);
			if (sleeping) {
		/*
		 * Take a short snooze, and then wake up this hwgroup again.
		 * This gives other hwgroups on the same a chance to
		 * play fairly with us, just in case there are big differences
		 * in relative throughputs.. don't want to hog the cpu too much.
		 */
				if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
					sleep = jiffies + WAIT_MIN_SLEEP;
#if 1
				if (timer_pending(&hwgroup->timer))
					printk(KERN_CRIT "ide_set_handler: timer already active\n");
#endif
				/* so that ide_timer_expiry knows what to do */
				hwgroup->sleeping = 1;
1007
				hwgroup->req_gen_timer = hwgroup->req_gen;
L
Linus Torvalds 已提交
1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023
				mod_timer(&hwgroup->timer, sleep);
				/* we purposely leave hwgroup->busy==1
				 * while sleeping */
			} else {
				/* Ugly, but how can we sleep for the lock
				 * otherwise? perhaps from tq_disk?
				 */

				/* for atari only */
				ide_release_lock();
				hwgroup->busy = 0;
			}

			/* no more work for this hwgroup (for now) */
			return;
		}
1024
	again:
L
Linus Torvalds 已提交
1025
		hwif = HWIF(drive);
1026
		if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) {
1027 1028 1029 1030 1031
			/*
			 * set nIEN for previous hwif, drives in the
			 * quirk_list may not like intr setups/cleanups
			 */
			if (drive->quirk_list != 1)
1032
				hwif->tp_ops->set_irq(hwif, 0);
L
Linus Torvalds 已提交
1033 1034 1035
		}
		hwgroup->hwif = hwif;
		hwgroup->drive = drive;
1036
		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
L
Linus Torvalds 已提交
1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065
		drive->service_start = jiffies;

		if (blk_queue_plugged(drive->queue)) {
			printk(KERN_ERR "ide: huh? queue was plugged!\n");
			break;
		}

		/*
		 * we know that the queue isn't empty, but this can happen
		 * if the q->prep_rq_fn() decides to kill a request
		 */
		rq = elv_next_request(drive->queue);
		if (!rq) {
			hwgroup->busy = 0;
			break;
		}

		/*
		 * Sanity: don't accept a request that isn't a PM request
		 * if we are currently power managed. This is very important as
		 * blk_stop_queue() doesn't prevent the elv_next_request()
		 * above to return us whatever is in the queue. Since we call
		 * ide_do_request() ourselves, we end up taking requests while
		 * the queue is blocked...
		 * 
		 * We let requests forced at head of queue with ide-preempt
		 * though. I hope that doesn't happen too much, hopefully not
		 * unless the subdriver triggers such a thing in its own PM
		 * state machine.
1066 1067 1068
		 *
		 * We count how many times we loop here to make sure we service
		 * all drives in the hwgroup without looping for ever
L
Linus Torvalds 已提交
1069
		 */
B
Bartlomiej Zolnierkiewicz 已提交
1070 1071 1072
		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
		    blk_pm_request(rq) == 0 &&
		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
1073 1074 1075
			drive = drive->next ? drive->next : hwgroup->drive;
			if (loops++ < 4 && !blk_queue_plugged(drive->queue))
				goto again;
L
Linus Torvalds 已提交
1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093
			/* We clear busy, there should be no pending ATA command at this point. */
			hwgroup->busy = 0;
			break;
		}

		hwgroup->rq = rq;

		/*
		 * Some systems have trouble with IDE IRQs arriving while
		 * the driver is still setting things up.  So, here we disable
		 * the IRQ used by this interface while the request is being started.
		 * This may look bad at first, but pretty much the same thing
		 * happens anyway when any interrupt comes in, IDE or otherwise
		 *  -- the kernel masks the IRQ while it is being handled.
		 */
		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
			disable_irq_nosync(hwif->irq);
		spin_unlock(&ide_lock);
1094
		local_irq_enable_in_hardirq();
L
Linus Torvalds 已提交
1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107
			/* allow other IRQs while we start this request */
		startstop = start_request(drive, rq);
		spin_lock_irq(&ide_lock);
		if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
			enable_irq(hwif->irq);
		if (startstop == ide_stopped)
			hwgroup->busy = 0;
	}
}

/*
 * Passes the stuff to ide_do_request
 */
1108
void do_ide_request(struct request_queue *q)
L
Linus Torvalds 已提交
1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131
{
	ide_drive_t *drive = q->queuedata;

	ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
}

/*
 * un-busy the hwgroup etc, and clear any pending DMA status. we want to
 * retry the current request in pio mode instead of risking tossing it
 * all away
 */
static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
{
	ide_hwif_t *hwif = HWIF(drive);
	struct request *rq;
	ide_startstop_t ret = ide_stopped;

	/*
	 * end current dma transaction
	 */

	if (error < 0) {
		printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
1132
		(void)hwif->dma_ops->dma_end(drive);
L
Linus Torvalds 已提交
1133
		ret = ide_error(drive, "dma timeout error",
1134
				hwif->tp_ops->read_status(hwif));
L
Linus Torvalds 已提交
1135 1136
	} else {
		printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
1137
		hwif->dma_ops->dma_timeout(drive);
L
Linus Torvalds 已提交
1138 1139 1140 1141 1142 1143 1144
	}

	/*
	 * disable dma for now, but remember that we did so because of
	 * a timeout -- we'll reenable after we finish this next request
	 * (or rather the first chunk of it) in pio.
	 */
1145
	drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
L
Linus Torvalds 已提交
1146
	drive->retry_pio++;
1147
	ide_dma_off_quietly(drive);
L
Linus Torvalds 已提交
1148 1149 1150 1151 1152 1153

	/*
	 * un-busy drive etc (hwgroup->busy is cleared on return) and
	 * make sure request is sane
	 */
	rq = HWGROUP(drive)->rq;
H
Hua Zhong 已提交
1154 1155 1156 1157

	if (!rq)
		goto out;

L
Linus Torvalds 已提交
1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196
	HWGROUP(drive)->rq = NULL;

	rq->errors = 0;

	if (!rq->bio)
		goto out;

	rq->sector = rq->bio->bi_sector;
	rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
	rq->hard_cur_sectors = rq->current_nr_sectors;
	rq->buffer = bio_data(rq->bio);
out:
	return ret;
}

/**
 *	ide_timer_expiry	-	handle lack of an IDE interrupt
 *	@data: timer callback magic (hwgroup)
 *
 *	An IDE command has timed out before the expected drive return
 *	occurred. At this point we attempt to clean up the current
 *	mess. If the current handler includes an expiry handler then
 *	we invoke the expiry handler, and providing it is happy the
 *	work is done. If that fails we apply generic recovery rules
 *	invoking the handler and checking the drive DMA status. We
 *	have an excessively incestuous relationship with the DMA
 *	logic that wants cleaning up.
 */
 
void ide_timer_expiry (unsigned long data)
{
	ide_hwgroup_t	*hwgroup = (ide_hwgroup_t *) data;
	ide_handler_t	*handler;
	ide_expiry_t	*expiry;
	unsigned long	flags;
	unsigned long	wait = -1;

	spin_lock_irqsave(&ide_lock, flags);

1197 1198
	if (((handler = hwgroup->handler) == NULL) ||
	    (hwgroup->req_gen != hwgroup->req_gen_timer)) {
L
Linus Torvalds 已提交
1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225
		/*
		 * Either a marginal timeout occurred
		 * (got the interrupt just as timer expired),
		 * or we were "sleeping" to give other devices a chance.
		 * Either way, we don't really want to complain about anything.
		 */
		if (hwgroup->sleeping) {
			hwgroup->sleeping = 0;
			hwgroup->busy = 0;
		}
	} else {
		ide_drive_t *drive = hwgroup->drive;
		if (!drive) {
			printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
			hwgroup->handler = NULL;
		} else {
			ide_hwif_t *hwif;
			ide_startstop_t startstop = ide_stopped;
			if (!hwgroup->busy) {
				hwgroup->busy = 1;	/* paranoia */
				printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
			}
			if ((expiry = hwgroup->expiry) != NULL) {
				/* continue */
				if ((wait = expiry(drive)) > 0) {
					/* reset timer */
					hwgroup->timer.expires  = jiffies + wait;
1226
					hwgroup->req_gen_timer = hwgroup->req_gen;
L
Linus Torvalds 已提交
1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248
					add_timer(&hwgroup->timer);
					spin_unlock_irqrestore(&ide_lock, flags);
					return;
				}
			}
			hwgroup->handler = NULL;
			/*
			 * We need to simulate a real interrupt when invoking
			 * the handler() function, which means we need to
			 * globally mask the specific IRQ:
			 */
			spin_unlock(&ide_lock);
			hwif  = HWIF(drive);
			/* disable_irq_nosync ?? */
			disable_irq(hwif->irq);
			/* local CPU only,
			 * as if we were handling an interrupt */
			local_irq_disable();
			if (hwgroup->polling) {
				startstop = handler(drive);
			} else if (drive_is_ready(drive)) {
				if (drive->waiting_for_dma)
1249
					hwif->dma_ops->dma_lost_irq(drive);
L
Linus Torvalds 已提交
1250 1251 1252 1253 1254 1255 1256 1257
				(void)ide_ack_intr(hwif);
				printk(KERN_WARNING "%s: lost interrupt\n", drive->name);
				startstop = handler(drive);
			} else {
				if (drive->waiting_for_dma) {
					startstop = ide_dma_timeout_retry(drive, wait);
				} else
					startstop =
1258
					ide_error(drive, "irq timeout",
1259
						  hwif->tp_ops->read_status(hwif));
L
Linus Torvalds 已提交
1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314
			}
			drive->service_time = jiffies - drive->service_start;
			spin_lock_irq(&ide_lock);
			enable_irq(hwif->irq);
			if (startstop == ide_stopped)
				hwgroup->busy = 0;
		}
	}
	ide_do_request(hwgroup, IDE_NO_IRQ);
	spin_unlock_irqrestore(&ide_lock, flags);
}

/**
 *	unexpected_intr		-	handle an unexpected IDE interrupt
 *	@irq: interrupt line
 *	@hwgroup: hwgroup being processed
 *
 *	There's nothing really useful we can do with an unexpected interrupt,
 *	other than reading the status register (to clear it), and logging it.
 *	There should be no way that an irq can happen before we're ready for it,
 *	so we needn't worry much about losing an "important" interrupt here.
 *
 *	On laptops (and "green" PCs), an unexpected interrupt occurs whenever
 *	the drive enters "idle", "standby", or "sleep" mode, so if the status
 *	looks "good", we just ignore the interrupt completely.
 *
 *	This routine assumes __cli() is in effect when called.
 *
 *	If an unexpected interrupt happens on irq15 while we are handling irq14
 *	and if the two interfaces are "serialized" (CMD640), then it looks like
 *	we could screw up by interfering with a new request being set up for 
 *	irq15.
 *
 *	In reality, this is a non-issue.  The new command is not sent unless 
 *	the drive is ready to accept one, in which case we know the drive is
 *	not trying to interrupt us.  And ide_set_handler() is always invoked
 *	before completing the issuance of any new drive command, so we will not
 *	be accidentally invoked as a result of any valid command completion
 *	interrupt.
 *
 *	Note that we must walk the entire hwgroup here. We know which hwif
 *	is doing the current command, but we don't know which hwif burped
 *	mysteriously.
 */
 
static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
{
	u8 stat;
	ide_hwif_t *hwif = hwgroup->hwif;

	/*
	 * handle the unexpected interrupt
	 */
	do {
		if (hwif->irq == irq) {
1315
			stat = hwif->tp_ops->read_status(hwif);
1316

1317
			if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
L
Linus Torvalds 已提交
1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357
				/* Try to not flood the console with msgs */
				static unsigned long last_msgtime, count;
				++count;
				if (time_after(jiffies, last_msgtime + HZ)) {
					last_msgtime = jiffies;
					printk(KERN_ERR "%s%s: unexpected interrupt, "
						"status=0x%02x, count=%ld\n",
						hwif->name,
						(hwif->next==hwgroup->hwif) ? "" : "(?)", stat, count);
				}
			}
		}
	} while ((hwif = hwif->next) != hwgroup->hwif);
}

/**
 *	ide_intr	-	default IDE interrupt handler
 *	@irq: interrupt number
 *	@dev_id: hwif group
 *	@regs: unused weirdness from the kernel irq layer
 *
 *	This is the default IRQ handler for the IDE layer. You should
 *	not need to override it. If you do be aware it is subtle in
 *	places
 *
 *	hwgroup->hwif is the interface in the group currently performing
 *	a command. hwgroup->drive is the drive and hwgroup->handler is
 *	the IRQ handler to call. As we issue a command the handlers
 *	step through multiple states, reassigning the handler to the
 *	next step in the process. Unlike a smart SCSI controller IDE
 *	expects the main processor to sequence the various transfer
 *	stages. We also manage a poll timer to catch up with most
 *	timeout situations. There are still a few where the handlers
 *	don't ever decide to give up.
 *
 *	The handler eventually returns ide_stopped to indicate the
 *	request completed. At this point we issue the next request
 *	on the hwgroup and the process begins again.
 */
 
1358
irqreturn_t ide_intr (int irq, void *dev_id)
L
Linus Torvalds 已提交
1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391
{
	unsigned long flags;
	ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
	ide_hwif_t *hwif;
	ide_drive_t *drive;
	ide_handler_t *handler;
	ide_startstop_t startstop;

	spin_lock_irqsave(&ide_lock, flags);
	hwif = hwgroup->hwif;

	if (!ide_ack_intr(hwif)) {
		spin_unlock_irqrestore(&ide_lock, flags);
		return IRQ_NONE;
	}

	if ((handler = hwgroup->handler) == NULL || hwgroup->polling) {
		/*
		 * Not expecting an interrupt from this drive.
		 * That means this could be:
		 *	(1) an interrupt from another PCI device
		 *	sharing the same PCI INT# as us.
		 * or	(2) a drive just entered sleep or standby mode,
		 *	and is interrupting to let us know.
		 * or	(3) a spurious interrupt of unknown origin.
		 *
		 * For PCI, we cannot tell the difference,
		 * so in that case we just ignore it and hope it goes away.
		 *
		 * FIXME: unexpected_intr should be hwif-> then we can
		 * remove all the ifdef PCI crap
		 */
#ifdef CONFIG_BLK_DEV_IDEPCI
1392
		if (hwif->chipset != ide_pci)
L
Linus Torvalds 已提交
1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405
#endif	/* CONFIG_BLK_DEV_IDEPCI */
		{
			/*
			 * Probably not a shared PCI interrupt,
			 * so we can safely try to do something about it:
			 */
			unexpected_intr(irq, hwgroup);
#ifdef CONFIG_BLK_DEV_IDEPCI
		} else {
			/*
			 * Whack the status register, just in case
			 * we have a leftover pending IRQ.
			 */
1406
			(void)hwif->tp_ops->read_status(hwif);
L
Linus Torvalds 已提交
1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438
#endif /* CONFIG_BLK_DEV_IDEPCI */
		}
		spin_unlock_irqrestore(&ide_lock, flags);
		return IRQ_NONE;
	}
	drive = hwgroup->drive;
	if (!drive) {
		/*
		 * This should NEVER happen, and there isn't much
		 * we could do about it here.
		 *
		 * [Note - this can occur if the drive is hot unplugged]
		 */
		spin_unlock_irqrestore(&ide_lock, flags);
		return IRQ_HANDLED;
	}
	if (!drive_is_ready(drive)) {
		/*
		 * This happens regularly when we share a PCI IRQ with
		 * another device.  Unfortunately, it can also happen
		 * with some buggy drives that trigger the IRQ before
		 * their status register is up to date.  Hopefully we have
		 * enough advance overhead that the latter isn't a problem.
		 */
		spin_unlock_irqrestore(&ide_lock, flags);
		return IRQ_NONE;
	}
	if (!hwgroup->busy) {
		hwgroup->busy = 1;	/* paranoia */
		printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
	}
	hwgroup->handler = NULL;
1439
	hwgroup->req_gen++;
L
Linus Torvalds 已提交
1440 1441 1442
	del_timer(&hwgroup->timer);
	spin_unlock(&ide_lock);

1443 1444
	if (hwif->port_ops && hwif->port_ops->clear_irq)
		hwif->port_ops->clear_irq(drive);
1445

B
Bartlomiej Zolnierkiewicz 已提交
1446
	if (drive->dev_flags & IDE_DFLAG_UNMASK)
1447
		local_irq_enable_in_hardirq();
1448

L
Linus Torvalds 已提交
1449 1450 1451
	/* service this interrupt, may set handler for next interrupt */
	startstop = handler(drive);

1452
	spin_lock_irq(&ide_lock);
L
Linus Torvalds 已提交
1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481
	/*
	 * Note that handler() may have set things up for another
	 * interrupt to occur soon, but it cannot happen until
	 * we exit from this routine, because it will be the
	 * same irq as is currently being serviced here, and Linux
	 * won't allow another of the same (on any CPU) until we return.
	 */
	drive->service_time = jiffies - drive->service_start;
	if (startstop == ide_stopped) {
		if (hwgroup->handler == NULL) {	/* paranoia */
			hwgroup->busy = 0;
			ide_do_request(hwgroup, hwif->irq);
		} else {
			printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
				"on exit\n", drive->name);
		}
	}
	spin_unlock_irqrestore(&ide_lock, flags);
	return IRQ_HANDLED;
}

/**
 *	ide_do_drive_cmd	-	issue IDE special command
 *	@drive: device to issue command
 *	@rq: request to issue
 *
 *	This function issues a special IDE device request
 *	onto the request queue.
 *
1482 1483 1484 1485 1486
 *	the rq is queued at the head of the request queue, displacing
 *	the currently-being-processed request and this function
 *	returns immediately without waiting for the new rq to be
 *	completed.  This is VERY DANGEROUS, and is intended for
 *	careful use by the ATAPI tape/cdrom driver code.
L
Linus Torvalds 已提交
1487
 */
1488 1489

void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
L
Linus Torvalds 已提交
1490 1491 1492
{
	unsigned long flags;
	ide_hwgroup_t *hwgroup = HWGROUP(drive);
1493

L
Linus Torvalds 已提交
1494
	spin_lock_irqsave(&ide_lock, flags);
1495 1496
	hwgroup->rq = NULL;
	__elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 1);
1497
	__generic_unplug_device(drive->queue);
L
Linus Torvalds 已提交
1498 1499 1500 1501
	spin_unlock_irqrestore(&ide_lock, flags);
}

EXPORT_SYMBOL(ide_do_drive_cmd);
1502 1503 1504

void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
{
1505
	ide_hwif_t *hwif = drive->hwif;
1506 1507 1508 1509 1510 1511 1512 1513 1514
	ide_task_t task;

	memset(&task, 0, sizeof(task));
	task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
			IDE_TFLAG_OUT_FEATURE | tf_flags;
	task.tf.feature = dma;		/* Use PIO/DMA */
	task.tf.lbam    = bcount & 0xff;
	task.tf.lbah    = (bcount >> 8) & 0xff;

1515
	ide_tf_dump(drive->name, &task.tf);
1516
	hwif->tp_ops->set_irq(hwif, 1);
1517
	SELECT_MASK(drive, 0);
1518
	hwif->tp_ops->tf_load(drive, &task);
1519 1520 1521
}

EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
1522 1523 1524 1525 1526 1527 1528 1529

void ide_pad_transfer(ide_drive_t *drive, int write, int len)
{
	ide_hwif_t *hwif = drive->hwif;
	u8 buf[4] = { 0 };

	while (len > 0) {
		if (write)
1530
			hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
1531
		else
1532
			hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
1533 1534 1535 1536
		len -= 4;
	}
}
EXPORT_SYMBOL_GPL(ide_pad_transfer);