p2020ds.dts 8.1 KB
Newer Older
1 2 3
/*
 * P2020 DS Device Tree Source
 *
4
 * Copyright 2009-2011 Freescale Semiconductor Inc.
5 6 7 8 9 10 11
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

12 13
/include/ "p2020si.dtsi"

14
/ {
15
	model = "fsl,P2020DS";
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
	compatible = "fsl,P2020DS";

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
	};


	memory {
		device_type = "memory";
	};

	localbus@ffe05000 {
		compatible = "fsl,elbc", "simple-bus";
		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
			  0x1 0x0 0x0 0xe0000000 0x08000000
			  0x2 0x0 0x0 0xffa00000 0x00040000
			  0x3 0x0 0x0 0xffdf0000 0x00008000
			  0x4 0x0 0x0 0xffa40000 0x00040000
			  0x5 0x0 0x0 0xffa80000 0x00040000
			  0x6 0x0 0x0 0xffac0000 0x00040000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;
			bank-width = <2>;
			device-width = <1>;

			ramdisk@0 {
				reg = <0x0 0x03000000>;
				read-only;
			};

			diagnostic@3000000 {
				reg = <0x03000000 0x00e00000>;
				read-only;
			};

			dink@3e00000 {
				reg = <0x03e00000 0x00200000>;
				read-only;
			};

			kernel@4000000 {
				reg = <0x04000000 0x00400000>;
				read-only;
			};

			jffs2@4400000 {
				reg = <0x04400000 0x03b00000>;
			};

			dtb@7f00000 {
				reg = <0x07f00000 0x00080000>;
				read-only;
			};

			u-boot@7f80000 {
				reg = <0x07f80000 0x00080000>;
				read-only;
			};
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,elbc-fcm-nand";
			reg = <0x2 0x0 0x40000>;

			u-boot@0 {
				reg = <0x0 0x02000000>;
				read-only;
			};

			jffs2@2000000 {
				reg = <0x02000000 0x10000000>;
			};

			ramdisk@12000000 {
				reg = <0x12000000 0x08000000>;
				read-only;
			};

			kernel@1a000000 {
				reg = <0x1a000000 0x04000000>;
			};

			dtb@1e000000 {
				reg = <0x1e000000 0x01000000>;
				read-only;
			};

			empty@1f000000 {
				reg = <0x1f000000 0x21000000>;
			};
		};

121 122 123 124 125
		board-control@3,0 {
			compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
			reg = <0x3 0x0 0x30>;
		};

126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
		nand@4,0 {
			compatible = "fsl,elbc-fcm-nand";
			reg = <0x4 0x0 0x40000>;
		};

		nand@5,0 {
			compatible = "fsl,elbc-fcm-nand";
			reg = <0x5 0x0 0x40000>;
		};

		nand@6,0 {
			compatible = "fsl,elbc-fcm-nand";
			reg = <0x6 0x0 0x40000>;
		};
	};

	soc@ffe00000 {

144 145
		usb@22000 {
			phy_type = "ulpi";
146 147
		};

148 149
		mdio@24520 {
			phy0: ethernet-phy@0 {
150
				interrupt-parent = <&mpic>;
151 152
				interrupts = <3 1>;
				reg = <0x0>;
153
			};
154
			phy1: ethernet-phy@1 {
155
				interrupt-parent = <&mpic>;
156 157
				interrupts = <3 1>;
				reg = <0x1>;
158
			};
159
			phy2: ethernet-phy@2 {
160
				interrupt-parent = <&mpic>;
161 162
				interrupts = <3 1>;
				reg = <0x2>;
163
			};
164 165 166
			tbi0: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
167 168 169 170
			};

		};

171 172 173 174 175
		mdio@25520 {
			tbi1: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
176 177
		};

178 179 180 181
		mdio@26520 {
			tbi2: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
182 183 184 185
			};

		};

186 187 188 189 190 191 192 193 194 195 196 197 198
		ptp_clock@24E00 {
			compatible = "fsl,etsec-ptp";
			reg = <0x24E00 0xB0>;
			interrupts = <68 2 69 2 70 2>;
			interrupt-parent = < &mpic >;
			fsl,tclk-period = <5>;
			fsl,tmr-prsc = <200>;
			fsl,tmr-add = <0xCCCCCCCD>;
			fsl,tmr-fiper1 = <0x3B9AC9FB>;
			fsl,tmr-fiper2 = <0x0001869B>;
			fsl,max-adj = <249999999>;
		};

199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404
		enet0: ethernet@24000 {
			tbi-handle = <&tbi0>;
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";
		};

		enet1: ethernet@25000 {
			tbi-handle = <&tbi1>;
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";

		};

		enet2: ethernet@26000 {
			tbi-handle = <&tbi2>;
			phy-handle = <&phy2>;
			phy-connection-type = "rgmii-id";
		};


		msi@41600 {
			compatible = "fsl,mpic-msi";
		};
	};

	pci0: pcie@ffe08000 {
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x8 0x1
			0000 0x0 0x0 0x2 &mpic 0x9 0x1
			0000 0x0 0x0 0x3 &mpic 0xa 0x1
			0000 0x0 0x0 0x4 &mpic 0xb 0x1
			>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0x80000000
				  0x2000000 0x0 0x80000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x10000>;
		};
	};

	pci1: pcie@ffe09000 {
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
		interrupt-map = <

			// IDSEL 0x11 func 0 - PCI slot 1
			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 1 - PCI slot 1
			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 2 - PCI slot 1
			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 3 - PCI slot 1
			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 4 - PCI slot 1
			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 5 - PCI slot 1
			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 6 - PCI slot 1
			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x11 func 7 - PCI slot 1
			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2

			// IDSEL 0x1d  Audio
			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2

			// IDSEL 0x1e Legacy
			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2

			// IDSEL 0x1f IDE/SATA
			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
			>;

		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x10000>;
			uli1575@0 {
				reg = <0x0 0x0 0x0 0x0 0x0>;
				#size-cells = <2>;
				#address-cells = <3>;
				ranges = <0x2000000 0x0 0xa0000000
					  0x2000000 0x0 0xa0000000
					  0x0 0x20000000

					  0x1000000 0x0 0x0
					  0x1000000 0x0 0x0
					  0x0 0x10000>;
				isa@1e {
					device_type = "isa";
					#interrupt-cells = <2>;
					#size-cells = <1>;
					#address-cells = <2>;
					reg = <0xf000 0x0 0x0 0x0 0x0>;
					ranges = <0x1 0x0 0x1000000 0x0 0x0
						  0x1000>;
					interrupt-parent = <&i8259>;

					i8259: interrupt-controller@20 {
						reg = <0x1 0x20 0x2
						       0x1 0xa0 0x2
						       0x1 0x4d0 0x2>;
						interrupt-controller;
						device_type = "interrupt-controller";
						#address-cells = <0>;
						#interrupt-cells = <2>;
						compatible = "chrp,iic";
						interrupts = <4 1>;
						interrupt-parent = <&mpic>;
					};

					i8042@60 {
						#size-cells = <0>;
						#address-cells = <1>;
						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
						interrupts = <1 3 12 3>;
						interrupt-parent =
							<&i8259>;

						keyboard@0 {
							reg = <0x0>;
							compatible = "pnpPNP,303";
						};

						mouse@1 {
							reg = <0x1>;
							compatible = "pnpPNP,f03";
						};
					};

					rtc@70 {
						compatible = "pnpPNP,b00";
						reg = <0x1 0x70 0x2>;
					};

					gpio@400 {
						reg = <0x1 0x400 0x80>;
					};
				};
			};
		};

	};

	pci2: pcie@ffe0a000 {
		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x0 0x1
			0000 0x0 0x0 0x2 &mpic 0x1 0x1
			0000 0x0 0x0 0x3 &mpic 0x2 0x1
			0000 0x0 0x0 0x4 &mpic 0x3 0x1
			>;
		pcie@0 {
			reg = <0x0 0x0 0x0 0x0 0x0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x2000000 0x0 0xc0000000
				  0x2000000 0x0 0xc0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x10000>;
		};
	};
};