Kconfig 25.8 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5 6 7 8 9 10
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config ARM
	bool
	default y
11
	select RTC_LIB
L
Linus Torvalds 已提交
12 13
	help
	  The ARM series is a line of low-power-consumption RISC chip designs
14
	  licensed by ARM Ltd and targeted at embedded applications and
L
Linus Torvalds 已提交
15
	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
16
	  manufactured, but legacy ARM-based PC hardware remains popular in
L
Linus Torvalds 已提交
17 18 19
	  Europe.  There is an ARM Linux project with a web page at
	  <http://www.arm.linux.org.uk/>.

20 21 22 23
config GENERIC_TIME
	bool
	default n

L
Linus Torvalds 已提交
24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
config MMU
	bool
	default y

config EISA
	bool
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

config SBUS
	bool

config MCA
	bool
	help
	  MicroChannel Architecture is found in some IBM PS/2 machines and
	  laptops.  It is a bus system similar to PCI or ISA. See
	  <file:Documentation/mca.txt> (and especially the web page given
	  there) before attempting to build an MCA bus kernel.

54 55 56 57
config GENERIC_HARDIRQS
	bool
	default y

R
Russell King 已提交
58 59 60 61
config TRACE_IRQFLAGS_SUPPORT
	bool
	default y

62 63 64 65 66 67 68 69
config HARDIRQS_SW_RESEND
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

L
Linus Torvalds 已提交
70 71 72 73 74 75 76
config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

77 78 79 80
config GENERIC_HWEIGHT
	bool
	default y

L
Linus Torvalds 已提交
81 82 83 84 85 86 87
config GENERIC_CALIBRATE_DELAY
	bool
	default y

config GENERIC_BUST_SPINLOCK
	bool

88 89 90
config ARCH_MAY_HAVE_PC_FDC
	bool

L
Linus Torvalds 已提交
91 92 93 94 95 96
config GENERIC_ISA_DMA
	bool

config FIQ
	bool

97 98 99
config ARCH_MTD_XIP
	bool

100 101
config VECTORS_BASE
	hex
102
	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
103 104 105 106 107
	default DRAM_BASE if REMAP_VECTORS_TO_RAM
	default 0x00000000
	help
	  The base address of exception vectors.

L
Linus Torvalds 已提交
108 109 110 111 112 113
source "init/Kconfig"

menu "System Type"

choice
	prompt "ARM system type"
114
	default ARCH_VERSATILE
L
Linus Torvalds 已提交
115

116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143
config ARCH_AAEC2000
	bool "Agilent AAEC-2000 based"
	select ARM_AMBA
	help
	  This enables support for systems based on the Agilent AAEC-2000

config ARCH_INTEGRATOR
	bool "ARM Ltd. Integrator family"
	select ARM_AMBA
	select ICST525
	help
	  Support for ARM's Integrator platform.

config ARCH_REALVIEW
	bool "ARM Ltd. RealView family"
	select ARM_AMBA
	select ICST307
	help
	  This enables support for ARM Ltd RealView boards.

config ARCH_VERSATILE
	bool "ARM Ltd. Versatile family"
	select ARM_AMBA
	select ARM_VIC
	select ICST307
	help
	  This enables support for ARM Ltd Versatile board.

144 145
config ARCH_AT91
	bool "Atmel AT91"
146
	help
147 148
	  This enables support for systems based on the Atmel AT91RM9200
	  and AT91SAM9xxx processors.
149

L
Linus Torvalds 已提交
150
config ARCH_CLPS7500
151
	bool "Cirrus CL-PS7500FE"
L
Linus Torvalds 已提交
152
	select TIMER_ACORN
153
	select ISA
154 155
	help
	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
L
Linus Torvalds 已提交
156 157

config ARCH_CLPS711X
158
	bool "Cirrus Logic CLPS711x/EP721x-based"
159 160
	help
	  Support for Cirrus Logic 711x/721x based boards.
L
Linus Torvalds 已提交
161 162 163 164 165

config ARCH_CO285
	bool "Co-EBSA285"
	select FOOTBRIDGE
	select FOOTBRIDGE_ADDIN
166 167
	help
	  Support for Intel's EBSA285 companion chip.
L
Linus Torvalds 已提交
168 169 170

config ARCH_EBSA110
	bool "EBSA-110"
171
	select ISA
L
Linus Torvalds 已提交
172 173
	help
	  This is an evaluation board for the StrongARM processor available
174
	  from Digital. It has limited hardware on-board, including an
L
Linus Torvalds 已提交
175 176 177
	  Ethernet interface, two PCMCIA sockets, two serial ports and a
	  parallel port.

178 179 180 181 182 183 184
config ARCH_EP93XX
	bool "EP93xx-based"
	select ARM_AMBA
	select ARM_VIC
	help
	  This enables support for the Cirrus EP93xx series of CPUs.

L
Linus Torvalds 已提交
185 186 187
config ARCH_FOOTBRIDGE
	bool "FootBridge"
	select FOOTBRIDGE
188 189 190
	help
	  Support for systems based on the DC21285 companion chip
	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
L
Linus Torvalds 已提交
191

192 193 194
config ARCH_NETX
	bool "Hilscher NetX based"
	select ARM_VIC
195
	help
196 197 198 199 200 201 202 203 204 205 206 207
	  This enables support for systems based on the Hilscher NetX Soc

config ARCH_H720X
	bool "Hynix HMS720x-based"
	select ISA_DMA_API
	help
	  This enables support for systems based on the Hynix HMS720x

config ARCH_IMX
	bool "IMX"
	help
	  Support for Motorola's i.MX family of processors (MX1, MXL).
L
Linus Torvalds 已提交
208

209 210
config ARCH_IOP32X
	bool "IOP32x-based"
211
	depends on MMU
212
	select PLAT_IOP
213
	select PCI
214
	help
215 216 217 218 219 220
	  Support for Intel's 80219 and IOP32X (XScale) family of
	  processors.

config ARCH_IOP33X
	bool "IOP33x-based"
	depends on MMU
221
	select PLAT_IOP
222 223 224
	select PCI
	help
	  Support for Intel's IOP33X (XScale) family of processors.
L
Linus Torvalds 已提交
225

226 227 228 229 230 231
config ARCH_IOP13XX
	bool "IOP13xx-based"
	select PCI
	help
	  Support for Intel's IOP13XX (XScale) family of processors.

L
Linus Torvalds 已提交
232 233
config ARCH_IXP4XX
	bool "IXP4xx-based"
234
	depends on MMU
235
	select GENERIC_TIME
236 237
	help
	  Support for Intel's IXP4XX (XScale) family of processors.
L
Linus Torvalds 已提交
238 239 240

config ARCH_IXP2000
	bool "IXP2400/2800-based"
241
	depends on MMU
242
	select PCI
243 244
	help
	  Support for Intel's IXP2400/2800 (XScale) family of processors.
L
Linus Torvalds 已提交
245

246 247
config ARCH_IXP23XX
 	bool "IXP23XX-based"
248
	depends on MMU
249 250 251 252
 	select PCI
	help
	  Support for Intel's IXP23xx (XScale) family of processors.

L
Linus Torvalds 已提交
253 254 255 256 257 258 259 260 261 262 263 264 265
config ARCH_L7200
	bool "LinkUp-L7200"
	select FIQ
	help
	  Say Y here if you intend to run this kernel on a LinkUp Systems
	  L7200 Software Development Board which uses an ARM720T processor.
	  Information on this board can be obtained at:

	  <http://www.linkupsys.com/>

	  If you have any questions or comments about the Linux kernel port
	  to this board, send e-mail to <sjhill@cotw.com>.

266 267 268 269 270
config ARCH_PNX4008
	bool "Philips Nexperia PNX4008 Mobile"
	help
	  This enables support for Philips PNX4008 mobile platform.

L
Linus Torvalds 已提交
271 272
config ARCH_PXA
	bool "PXA2xx-based"
273
	depends on MMU
274
	select ARCH_MTD_XIP
275 276
	help
	  Support for Intel's PXA2XX processor line.
L
Linus Torvalds 已提交
277 278 279 280 281 282

config ARCH_RPC
	bool "RiscPC"
	select ARCH_ACORN
	select FIQ
	select TIMER_ACORN
283
	select ARCH_MAY_HAVE_PC_FDC
284
	select ISA_DMA_API
L
Linus Torvalds 已提交
285 286 287 288 289 290
	help
	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
	  CD-ROM interface, serial and parallel port, and the floppy drive.

config ARCH_SA1100
	bool "SA1100-based"
291
	select ISA
R
Russell King 已提交
292
	select ARCH_DISCONTIGMEM_ENABLE
293
	select ARCH_MTD_XIP
294 295
	help
	  Support for StrongARM 11x0 based boards.
L
Linus Torvalds 已提交
296 297

config ARCH_S3C2410
298
	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
L
Linus Torvalds 已提交
299 300 301
	help
	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
302
	  the Samsung SMDK2410 development board (and derivatives).
L
Linus Torvalds 已提交
303 304 305

config ARCH_SHARK
	bool "Shark"
306 307 308
	select ISA
	select ISA_DMA
	select PCI
309 310 311
	help
	  Support for the StrongARM based Digital DNARD machine, also known
	  as "Shark" (<http://www.shark-linux.de/shark.html>).
L
Linus Torvalds 已提交
312 313 314 315 316 317 318 319 320 321 322

config ARCH_LH7A40X
	bool "Sharp LH7A40X"
	help
	  Say Y here for systems based on one of the Sharp LH7A40X
	  System on a Chip processors.  These CPUs include an ARM922T
	  core with a wide array of integrated devices for
	  hand-held and low-power applications.

config ARCH_OMAP
	bool "TI OMAP"
323 324
	help
	  Support for TI's OMAP platform (OMAP1 and OMAP2).
L
Linus Torvalds 已提交
325 326 327 328 329

endchoice

source "arch/arm/mach-clps711x/Kconfig"

330 331
source "arch/arm/mach-ep93xx/Kconfig"

L
Linus Torvalds 已提交
332 333 334 335
source "arch/arm/mach-footbridge/Kconfig"

source "arch/arm/mach-integrator/Kconfig"

336 337 338
source "arch/arm/mach-iop32x/Kconfig"

source "arch/arm/mach-iop33x/Kconfig"
L
Linus Torvalds 已提交
339

340 341
source "arch/arm/mach-iop13xx/Kconfig"

L
Linus Torvalds 已提交
342 343 344 345
source "arch/arm/mach-ixp4xx/Kconfig"

source "arch/arm/mach-ixp2000/Kconfig"

346 347
source "arch/arm/mach-ixp23xx/Kconfig"

L
Linus Torvalds 已提交
348 349 350 351
source "arch/arm/mach-pxa/Kconfig"

source "arch/arm/mach-sa1100/Kconfig"

352 353 354
source "arch/arm/plat-omap/Kconfig"

source "arch/arm/mach-omap1/Kconfig"
L
Linus Torvalds 已提交
355

356 357
source "arch/arm/mach-omap2/Kconfig"

L
Linus Torvalds 已提交
358 359 360 361 362 363 364 365 366 367
source "arch/arm/mach-s3c2410/Kconfig"

source "arch/arm/mach-lh7a40x/Kconfig"

source "arch/arm/mach-imx/Kconfig"

source "arch/arm/mach-h720x/Kconfig"

source "arch/arm/mach-versatile/Kconfig"

368 369
source "arch/arm/mach-aaec2000/Kconfig"

370 371
source "arch/arm/mach-realview/Kconfig"

372 373
source "arch/arm/mach-at91rm9200/Kconfig"

374 375
source "arch/arm/mach-netx/Kconfig"

L
Linus Torvalds 已提交
376 377 378 379
# Definitions to make life easier
config ARCH_ACORN
	bool

380 381 382
config PLAT_IOP
	bool

L
Linus Torvalds 已提交
383 384
source arch/arm/mm/Kconfig

385 386 387 388 389 390 391 392
config IWMMXT
	bool "Enable iWMMXt support"
	depends CPU_XSCALE || CPU_XSC3
	default y if PXA27x
	help
	  Enable support for iWMMXt context switching at run time if
	  running on a CPU that supports it.

L
Linus Torvalds 已提交
393 394 395 396 397 398
#  bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
config XSCALE_PMU
	bool
	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
	default y

399 400 401 402
if !MMU
source "arch/arm/Kconfig-nommu"
endif

L
Linus Torvalds 已提交
403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425
endmenu

source "arch/arm/common/Kconfig"

config FORCE_MAX_ZONEORDER
	int
	depends on SA1111
	default "9"

menu "Bus support"

config ARM_AMBA
	bool

config ISA
	bool
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

426
# Select ISA DMA controller support
L
Linus Torvalds 已提交
427 428
config ISA_DMA
	bool
429
	select ISA_DMA_API
L
Linus Torvalds 已提交
430

431
# Select ISA DMA interface
A
Al Viro 已提交
432 433 434
config ISA_DMA_API
	bool

L
Linus Torvalds 已提交
435
config PCI
436
	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
L
Linus Torvalds 已提交
437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

	  The PCI-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>, contains valuable
	  information about which PCI hardware does work under Linux and which
	  doesn't.

# Select the host bridge type
config PCI_HOST_VIA82C505
	bool
	depends on PCI && ARCH_SHARK
	default y

source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

menu "Kernel Features"

config SMP
	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
464
	depends on EXPERIMENTAL && REALVIEW_MPCORE
L
Linus Torvalds 已提交
465 466 467 468 469 470 471 472 473 474 475
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all, single
	  processor machines. On a single processor machine, the kernel will
	  run faster if you say N here.

476 477
	  See also the <file:Documentation/smp.txt>,
	  <file:Documentation/i386/IO-APIC.txt>,
L
Linus Torvalds 已提交
478 479 480 481 482 483 484 485 486 487 488
	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
	  <http://www.linuxdoc.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4"

489 490 491 492 493 494 495
config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP && HOTPLUG && EXPERIMENTAL
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

496 497
config LOCAL_TIMERS
	bool "Use local timer interrupts"
498
	depends on SMP && REALVIEW_MPCORE
499 500 501 502 503 504 505
	default y
	help
	  Enable support for local timers on SMP platforms, rather then the
	  legacy IPI broadcast method.  Local timers allows the system
	  accounting to be spread across the timer interval, preventing a
	  "thundering herd" at every timer tick.

L
Linus Torvalds 已提交
506 507 508 509 510 511 512 513 514 515 516 517 518
config PREEMPT
	bool "Preemptible Kernel (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

519 520 521 522 523 524 525 526 527 528 529 530 531 532 533
config NO_IDLE_HZ
	bool "Dynamic tick timer"
	help
	  Select this option if you want to disable continuous timer ticks
	  and have them programmed to occur as required. This option saves
	  power as the system can remain in idle state for longer.

	  By default dynamic tick is disabled during the boot, and can be
	  manually enabled with:

	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick

	  Alternatively, if you want dynamic tick automatically enabled
	  during boot, pass "dyntick=enable" via the kernel command string.

534 535
	  Please note that dynamic tick may affect the accuracy of
	  timekeeping on some platforms depending on the implementation.
536 537
	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
	  to have accurate timekeeping with dynamic tick.
538

539 540 541 542
config HZ
	int
	default 128 if ARCH_L7200
	default 200 if ARCH_EBSA110 || ARCH_S3C2410
543
	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
544 545
	default 100

546 547 548 549 550 551 552 553 554 555 556 557 558 559 560
config AEABI
	bool "Use the ARM EABI to compile the kernel"
	help
	  This option allows for the kernel to be compiled using the latest
	  ARM ABI (aka EABI).  This is only useful if you are using a user
	  space environment that is also compiled with EABI.

	  Since there are major incompatibilities between the legacy ABI and
	  EABI, especially with regard to structure member alignment, this
	  option also changes the kernel syscall calling convention to
	  disambiguate both ABIs and allow for backward compatibility support
	  (selected with CONFIG_OABI_COMPAT).

	  To use this you need GCC version 4.0.0 or later.

561
config OABI_COMPAT
562
	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
563
	depends on AEABI && EXPERIMENTAL
564 565 566 567 568 569 570 571 572 573 574 575 576 577
	default y
	help
	  This option preserves the old syscall interface along with the
	  new (ARM EABI) one. It also provides a compatibility layer to
	  intercept syscalls that have structure arguments which layout
	  in memory differs between the legacy ABI and the new ARM EABI
	  (only for non "thumb" binaries). This option adds a tiny
	  overhead to all syscalls and produces a slightly larger kernel.
	  If you know you'll be using only pure EABI user space then you
	  can say N here. If this option is not selected and you attempt
	  to execute a legacy ABI binary then the result will be
	  UNPREDICTABLE (in fact it can be predicted that it won't work
	  at all). If in doubt say Y.

578
config ARCH_DISCONTIGMEM_ENABLE
L
Linus Torvalds 已提交
579
	bool
580
	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
L
Linus Torvalds 已提交
581 582 583 584 585 586
	help
	  Say Y to support efficient handling of discontiguous physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa> for more.

Y
Yasunori Goto 已提交
587 588 589 590 591 592
config NODES_SHIFT
	int
	default "4" if ARCH_LH7A40X
	default "2"
	depends on NEED_MULTIPLE_NODES

593 594
source "mm/Kconfig"

L
Linus Torvalds 已提交
595 596 597 598 599 600
config LEDS
	bool "Timer and CPU usage LEDs"
	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
601
		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
602
		   ARCH_AT91 || MACH_TRIZEPS4
L
Linus Torvalds 已提交
603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644
	help
	  If you say Y here, the LEDs on your machine will be used
	  to provide useful information about your current system status.

	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
	  be able to select which LEDs are active using the options below. If
	  you are compiling a kernel for the EBSA-110 or the LART however, the
	  red LED will simply flash regularly to indicate that the system is
	  still functional. It is safe to say Y here if you have a CATS
	  system, but the driver will do nothing.

config LEDS_TIMER
	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
			    MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
	depends on LEDS
	default y if ARCH_EBSA110
	help
	  If you say Y here, one of the system LEDs (the green one on the
	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
	  will flash regularly to indicate that the system is still
	  operational. This is mainly useful to kernel hackers who are
	  debugging unstable kernels.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config LEDS_CPU
	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
			!ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
	depends on LEDS
	help
	  If you say Y here, the red LED will be used to give a good real
	  time indication of CPU usage, by lighting whenever the idle task
	  is not currently executing.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config ALIGNMENT_TRAP
	bool
645
	depends on CPU_CP15_MMU
L
Linus Torvalds 已提交
646 647
	default y if !ARCH_EBSA110
	help
648
	  ARM processors cannot fetch/store information which is not
L
Linus Torvalds 已提交
649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676
	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
	  address divisible by 4. On 32-bit ARM processors, these non-aligned
	  fetch/store instructions will be emulated in software if you say
	  here, which has a severe performance impact. This is necessary for
	  correct operation of some network protocols. With an IP-only
	  configuration it is safe to say N, otherwise say Y.

endmenu

menu "Boot options"

# Compressed boot loader in ROM.  Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
	hex "Compressed ROM boot loader base address"
	default "0"
	help
	  The physical address at which the ROM-able zImage is to be
	  placed in the target.  Platforms which normally make use of
	  ROM-able zImage formats normally set this to a suitable
	  value in their defconfig file.

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM_BSS
	hex "Compressed ROM boot loader BSS address"
	default "0"
	help
677 678 679 680 681 682
	  The base address of an area of read/write memory in the target
	  for the ROM-able zImage which must be available while the
	  decompressor is running. It must be large enough to hold the
	  entire decompressed kernel plus an additional 128 KiB.
	  Platforms which normally make use of ROM-able zImage formats
	  normally set this to a suitable value in their defconfig file.
L
Linus Torvalds 已提交
683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM
	bool "Compressed boot loader in ROM/flash"
	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
	help
	  Say Y here if you intend to execute your compressed kernel image
	  (zImage) directly from ROM or flash.  If unsure, say N.

config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  On some architectures (EBSA110 and CATS), there is currently no way
	  for the boot loader to pass arguments to the kernel. For these
	  architectures, you should supply some command-line options at build
	  time by entering them here. As a minimum, you should specify the
	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

config XIP_KERNEL
	bool "Kernel Execute-In-Place from ROM"
	depends on !ZBOOT_ROM
	help
	  Execute-In-Place allows the kernel to run from non-volatile storage
	  directly addressable by the CPU, such as NOR flash. This saves RAM
	  space since the text section of the kernel is not loaded from flash
	  to RAM.  Read-write sections, such as the data section and stack,
	  are still copied to RAM.  The XIP kernel is not compressed since
	  it has to run directly from flash, so it will take more space to
	  store it.  The flash address used to link the kernel object files,
	  and for storing it, is configuration dependent. Therefore, if you
	  say Y here, you must know the proper physical address where to
	  store the kernel image depending on your own flash memory usage.

	  Also note that the make target becomes "make xipImage" rather than
	  "make zImage" or "make Image".  The final kernel binary to put in
	  ROM memory will be arch/arm/boot/xipImage.

	  If unsure, say N.

config XIP_PHYS_ADDR
	hex "XIP Kernel Physical Location"
	depends on XIP_KERNEL
	default "0x00080000"
	help
	  This is the physical address in your flash memory the kernel will
	  be linked for and stored to.  This address is dependent on your
	  own flash usage.

endmenu

735
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
L
Linus Torvalds 已提交
736 737 738 739 740 741 742

menu "CPU Frequency scaling"

source "drivers/cpufreq/Kconfig"

config CPU_FREQ_SA1100
	bool
743
	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
L
Linus Torvalds 已提交
744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771
	default y

config CPU_FREQ_SA1110
	bool
	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
	default y

config CPU_FREQ_INTEGRATOR
	tristate "CPUfreq driver for ARM Integrator CPUs"
	depends on ARCH_INTEGRATOR && CPU_FREQ
	default y
	help
	  This enables the CPUfreq driver for ARM Integrator CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say Y.

endmenu

endif

menu "Floating point emulation"

comment "At least one emulation must be selected"

config FPE_NWFPE
	bool "NWFPE math emulation"
772
	depends on !AEABI || OABI_COMPAT
L
Linus Torvalds 已提交
773 774 775 776 777 778 779 780 781 782 783
	---help---
	  Say Y to include the NWFPE floating point emulator in the kernel.
	  This is necessary to run most binaries. Linux does not currently
	  support floating point hardware so you need to say Y here even if
	  your machine has an FPA or floating point co-processor podule.

	  You may say N here if you are going to load the Acorn FPEmulator
	  early in the bootup.

config FPE_NWFPE_XP
	bool "Support extended precision"
784
	depends on FPE_NWFPE
L
Linus Torvalds 已提交
785 786 787 788 789 790 791 792 793 794 795
	help
	  Say Y to include 80-bit support in the kernel floating-point
	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
	  Note that gcc does not generate 80-bit operations by default,
	  so in most cases this option only enlarges the size of the
	  floating point emulator without any good reason.

	  You almost surely want to say N here.

config FPE_FASTFPE
	bool "FastFPE math emulation (EXPERIMENTAL)"
796
	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
L
Linus Torvalds 已提交
797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827
	---help---
	  Say Y here to include the FAST floating point emulator in the kernel.
	  This is an experimental much faster emulator which now also has full
	  precision for the mantissa.  It does not support any exceptions.
	  It is very simple, and approximately 3-6 times faster than NWFPE.

	  It should be sufficient for most programs.  It may be not suitable
	  for scientific calculations, but you have to check this for yourself.
	  If you do not feel you need a faster FP emulation you should better
	  choose NWFPE.

config VFP
	bool "VFP-format floating point maths"
	depends on CPU_V6 || CPU_ARM926T
	help
	  Say Y to include VFP support code in the kernel. This is needed
	  if your hardware includes a VFP unit.

	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
	  release notes and additional status information.

	  Say N if your target does not have VFP hardware.

endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config ARTHUR
	tristate "RISC OS personality"
828
	depends on !AEABI
L
Linus Torvalds 已提交
829 830 831 832 833 834 835 836 837 838 839
	help
	  Say Y here to include the kernel code necessary if you want to run
	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
	  experimental; if this sounds frightening, say N and sleep in peace.
	  You can also say M here to compile this support as a module (which
	  will be called arthur).

endmenu

menu "Power management options"

R
Russell King 已提交
840
source "kernel/power/Kconfig"
L
Linus Torvalds 已提交
841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868

config APM
	tristate "Advanced Power Management Emulation"
	---help---
	  APM is a BIOS specification for saving power using several different
	  techniques. This is mostly useful for battery powered laptops with
	  APM compliant BIOSes. If you say Y here, the system time will be
	  reset after a RESUME operation, the /proc/apm device will provide
	  battery status information, and user-space programs will receive
	  notification of APM "events" (e.g. battery status change).

	  In order to use APM, you will need supporting software. For location
	  and more information, read <file:Documentation/pm.txt> and the
	  Battery Powered Linux mini-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

	  This driver does not spin down disk drives (see the hdparm(8)
	  manpage ("man 8 hdparm") for that), and it doesn't turn off
	  VESA-compliant "green" monitors.

	  Generally, if you don't have a battery in your machine, there isn't
	  much point in using this driver and you should say N. If you get
	  random kernel OOPSes or reboots that don't seem to be related to
	  anything, try disabling/enabling this option (or disabling/enabling
	  APM in your BIOS).

endmenu

869 870
source "net/Kconfig"

L
Linus Torvalds 已提交
871 872 873 874
menu "Device Drivers"

source "drivers/base/Kconfig"

P
Pavel Machek 已提交
875 876
source "drivers/connector/Kconfig"

877
if ALIGNMENT_TRAP || !CPU_CP15_MMU
L
Linus Torvalds 已提交
878 879 880 881 882 883 884 885 886 887 888
source "drivers/mtd/Kconfig"
endif

source "drivers/parport/Kconfig"

source "drivers/pnp/Kconfig"

source "drivers/block/Kconfig"

source "drivers/acorn/block/Kconfig"

889
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
890
	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
891 892
	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
	|| ARCH_IXP23XX
L
Linus Torvalds 已提交
893 894 895 896 897
source "drivers/ide/Kconfig"
endif

source "drivers/scsi/Kconfig"

898 899
source "drivers/ata/Kconfig"

L
Linus Torvalds 已提交
900 901 902 903 904 905 906 907
source "drivers/md/Kconfig"

source "drivers/message/fusion/Kconfig"

source "drivers/ieee1394/Kconfig"

source "drivers/message/i2o/Kconfig"

908
source "drivers/net/Kconfig"
L
Linus Torvalds 已提交
909 910 911 912 913 914 915 916 917 918 919

source "drivers/isdn/Kconfig"

# input before char - char/joystick depends on it. As does USB.

source "drivers/input/Kconfig"

source "drivers/char/Kconfig"

source "drivers/i2c/Kconfig"

920 921
source "drivers/spi/Kconfig"

922 923
source "drivers/w1/Kconfig"

924 925
source "drivers/hwmon/Kconfig"

L
Linus Torvalds 已提交
926 927 928 929
#source "drivers/l3/Kconfig"

source "drivers/misc/Kconfig"

930 931
source "drivers/mfd/Kconfig"

R
Richard Purdie 已提交
932 933
source "drivers/leds/Kconfig"

L
Linus Torvalds 已提交
934 935 936 937 938 939
source "drivers/media/Kconfig"

source "drivers/video/Kconfig"

source "sound/Kconfig"

940 941
source "drivers/hid/Kconfig"

L
Linus Torvalds 已提交
942 943 944 945
source "drivers/usb/Kconfig"

source "drivers/mmc/Kconfig"

946 947
source "drivers/rtc/Kconfig"

L
Linus Torvalds 已提交
948 949 950 951 952 953 954 955 956 957 958 959 960
endmenu

source "fs/Kconfig"

source "arch/arm/oprofile/Kconfig"

source "arch/arm/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"