sync-r4k.c 3.6 KB
Newer Older
1 2 3
/*
 * Count register synchronisation.
 *
4
 * All CPUs will have their count registers synchronised to the CPU0 next time
5 6 7 8 9 10 11 12 13 14
 * value. This can cause a small timewarp for CPU0. All other CPU's should
 * not have done anything significant (but they may have had interrupts
 * enabled briefly - prom_smp_finish() should not be responsible for enabling
 * interrupts...)
 *
 * FIXME: broken for SMTC
 */

#include <linux/kernel.h>
#include <linux/irqflags.h>
15
#include <linux/cpumask.h>
16

17
#include <asm/r4k-timer.h>
A
Arun Sharma 已提交
18
#include <linux/atomic.h>
19 20 21
#include <asm/barrier.h>
#include <asm/mipsregs.h>

22 23 24 25
static atomic_t count_start_flag = ATOMIC_INIT(0);
static atomic_t count_count_start = ATOMIC_INIT(0);
static atomic_t count_count_stop = ATOMIC_INIT(0);
static atomic_t count_reference = ATOMIC_INIT(0);
26

R
Ralf Baechle 已提交
27
#define COUNTON 100
28 29
#define NR_LOOPS 5

30
void synchronise_count_master(int cpu)
31 32 33 34 35 36 37 38 39 40 41 42 43
{
	int i;
	unsigned long flags;
	unsigned int initcount;

#ifdef CONFIG_MIPS_MT_SMTC
	/*
	 * SMTC needs to synchronise per VPE, not per CPU
	 * ignore for now
	 */
	return;
#endif

44
	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
45 46 47 48 49 50

	local_irq_save(flags);

	/*
	 * Notify the slaves that it's time to start
	 */
51
	atomic_set(&count_reference, read_c0_count());
52
	atomic_set(&count_start_flag, cpu);
53 54
	smp_wmb();

55 56
	/* Count will be initialised to current timer for all CPU's */
	initcount = read_c0_count();
57 58 59 60 61 62 63 64 65 66 67 68 69

	/*
	 * We loop a few times to get a primed instruction cache,
	 * then the last pass is more or less synchronised and
	 * the master and slaves each set their cycle counters to a known
	 * value all at once. This reduces the chance of having random offsets
	 * between the processors, and guarantees that the maximum
	 * delay between the cycle counters is never bigger than
	 * the latency of information-passing (cachelines) between
	 * two CPUs.
	 */

	for (i = 0; i < NR_LOOPS; i++) {
70 71
		/* slaves loop on '!= 2' */
		while (atomic_read(&count_count_start) != 1)
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
			mb();
		atomic_set(&count_count_stop, 0);
		smp_wmb();

		/* this lets the slaves write their count register */
		atomic_inc(&count_count_start);

		/*
		 * Everyone initialises count in the last loop:
		 */
		if (i == NR_LOOPS-1)
			write_c0_count(initcount);

		/*
		 * Wait for all slaves to leave the synchronization point:
		 */
88
		while (atomic_read(&count_count_stop) != 1)
89 90 91 92 93 94 95
			mb();
		atomic_set(&count_count_start, 0);
		smp_wmb();
		atomic_inc(&count_count_stop);
	}
	/* Arrange for an interrupt in a short while */
	write_c0_compare(read_c0_count() + COUNTON);
96
	atomic_set(&count_start_flag, 0);
97 98 99 100 101 102 103 104 105 106 107

	local_irq_restore(flags);

	/*
	 * i386 code reported the skew here, but the
	 * count registers were almost certainly out of sync
	 * so no point in alarming people
	 */
	printk("done.\n");
}

108
void synchronise_count_slave(int cpu)
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
{
	int i;
	unsigned int initcount;

#ifdef CONFIG_MIPS_MT_SMTC
	/*
	 * SMTC needs to synchronise per VPE, not per CPU
	 * ignore for now
	 */
	return;
#endif

	/*
	 * Not every cpu is online at the time this gets called,
	 * so we first wait for the master to say everyone is ready
	 */

126
	while (atomic_read(&count_start_flag) != cpu)
127 128
		mb();

129 130
	/* Count will be initialised to next expire for all CPU's */
	initcount = atomic_read(&count_reference);
131 132 133

	for (i = 0; i < NR_LOOPS; i++) {
		atomic_inc(&count_count_start);
134
		while (atomic_read(&count_count_start) != 2)
135 136 137 138 139 140 141 142 143
			mb();

		/*
		 * Everyone initialises count in the last loop:
		 */
		if (i == NR_LOOPS-1)
			write_c0_count(initcount);

		atomic_inc(&count_count_stop);
144
		while (atomic_read(&count_count_stop) != 2)
145 146 147 148 149 150
			mb();
	}
	/* Arrange for an interrupt in a short while */
	write_c0_compare(read_c0_count() + COUNTON);
}
#undef NR_LOOPS