hci_bcm.c 19.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
/*
 *
 *  Bluetooth HCI UART driver for Broadcom devices
 *
 *  Copyright (C) 2015  Intel Corporation
 *
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
27
#include <linux/firmware.h>
28 29 30 31 32 33
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
34
#include <linux/interrupt.h>
35
#include <linux/dmi.h>
36
#include <linux/pm_runtime.h>
37 38 39 40

#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>

41
#include "btbcm.h"
42
#include "hci_uart.h"
43

44 45 46
#define BCM_LM_DIAG_PKT 0x07
#define BCM_LM_DIAG_SIZE 63

47 48
#define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */

49 50 51 52 53 54 55 56 57 58 59
struct bcm_device {
	struct list_head	list;

	struct platform_device	*pdev;

	const char		*name;
	struct gpio_desc	*device_wakeup;
	struct gpio_desc	*shutdown;

	struct clk		*clk;
	bool			clk_enabled;
60 61

	u32			init_speed;
62 63
	int			irq;
	u8			irq_polarity;
64

65
#ifdef CONFIG_PM
66 67 68
	struct hci_uart		*hu;
	bool			is_suspended; /* suspend/resume flag */
#endif
69 70
};

71
struct bcm_data {
72 73 74 75
	struct sk_buff		*rx_skb;
	struct sk_buff_head	txq;

	struct bcm_device	*dev;
76 77
};

78
/* List of BCM BT UART devices */
79
static DEFINE_MUTEX(bcm_device_lock);
80 81
static LIST_HEAD(bcm_device_list);

82 83 84 85 86 87 88 89 90 91 92
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
	struct hci_dev *hdev = hu->hdev;
	struct sk_buff *skb;
	struct bcm_update_uart_baud_rate param;

	if (speed > 3000000) {
		struct bcm_write_uart_clock_setting clock;

		clock.type = BCM_UART_CLOCK_48MHZ;

93
		bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
94 95 96 97 98 99 100

		/* This Broadcom specific command changes the UART's controller
		 * clock for baud rate > 3000000.
		 */
		skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
		if (IS_ERR(skb)) {
			int err = PTR_ERR(skb);
101 102
			bt_dev_err(hdev, "BCM: failed to write clock (%d)",
				   err);
103 104 105 106 107 108
			return err;
		}

		kfree_skb(skb);
	}

109
	bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
110 111 112 113 114 115 116 117 118 119 120

	param.zero = cpu_to_le16(0);
	param.baud_rate = cpu_to_le32(speed);

	/* This Broadcom specific command changes the UART's controller baud
	 * rate.
	 */
	skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
			     HCI_INIT_TIMEOUT);
	if (IS_ERR(skb)) {
		int err = PTR_ERR(skb);
121 122
		bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
			   err);
123 124 125 126 127 128 129 130
		return err;
	}

	kfree_skb(skb);

	return 0;
}

131
/* bcm_device_exists should be protected by bcm_device_lock */
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
static bool bcm_device_exists(struct bcm_device *device)
{
	struct list_head *p;

	list_for_each(p, &bcm_device_list) {
		struct bcm_device *dev = list_entry(p, struct bcm_device, list);

		if (device == dev)
			return true;
	}

	return false;
}

static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
{
	if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
		clk_enable(dev->clk);

151 152
	gpiod_set_value(dev->shutdown, powered);
	gpiod_set_value(dev->device_wakeup, powered);
153 154 155 156 157 158 159 160 161

	if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
		clk_disable(dev->clk);

	dev->clk_enabled = powered;

	return 0;
}

162
#ifdef CONFIG_PM
163 164 165 166 167 168
static irqreturn_t bcm_host_wake(int irq, void *data)
{
	struct bcm_device *bdev = data;

	bt_dev_dbg(bdev, "Host wake IRQ");

169 170 171 172
	pm_runtime_get(&bdev->pdev->dev);
	pm_runtime_mark_last_busy(&bdev->pdev->dev);
	pm_runtime_put_autosuspend(&bdev->pdev->dev);

173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
	return IRQ_HANDLED;
}

static int bcm_request_irq(struct bcm_data *bcm)
{
	struct bcm_device *bdev = bcm->dev;
	int err = 0;

	/* If this is not a platform device, do not enable PM functionalities */
	mutex_lock(&bcm_device_lock);
	if (!bcm_device_exists(bdev)) {
		err = -ENODEV;
		goto unlock;
	}

	if (bdev->irq > 0) {
		err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
				       bcm_host_wake, IRQF_TRIGGER_RISING,
				       "host_wake", bdev);
		if (err)
			goto unlock;

		device_init_wakeup(&bdev->pdev->dev, true);
196 197 198 199 200 201

		pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
						 BCM_AUTOSUSPEND_DELAY);
		pm_runtime_use_autosuspend(&bdev->pdev->dev);
		pm_runtime_set_active(&bdev->pdev->dev);
		pm_runtime_enable(&bdev->pdev->dev);
202 203 204 205 206 207 208 209 210 211 212 213 214 215 216
	}

unlock:
	mutex_unlock(&bcm_device_lock);

	return err;
}

static const struct bcm_set_sleep_mode default_sleep_params = {
	.sleep_mode = 1,	/* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
	.idle_host = 2,		/* idle threshold HOST, in 300ms */
	.idle_dev = 2,		/* idle threshold device, in 300ms */
	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
217
	.combine_modes = 1,	/* Combine sleep and LPM flag */
218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251
	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
	/* Irrelevant USB flags */
	.usb_auto_sleep = 0,
	.usb_resume_timeout = 0,
	.pulsed_host_wake = 0,
	.break_to_host = 0
};

static int bcm_setup_sleep(struct hci_uart *hu)
{
	struct bcm_data *bcm = hu->priv;
	struct sk_buff *skb;
	struct bcm_set_sleep_mode sleep_params = default_sleep_params;

	sleep_params.host_wake_active = !bcm->dev->irq_polarity;

	skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
			     &sleep_params, HCI_INIT_TIMEOUT);
	if (IS_ERR(skb)) {
		int err = PTR_ERR(skb);
		bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
		return err;
	}
	kfree_skb(skb);

	bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");

	return 0;
}
#else
static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
#endif

252 253 254 255 256 257 258 259 260 261
static int bcm_set_diag(struct hci_dev *hdev, bool enable)
{
	struct hci_uart *hu = hci_get_drvdata(hdev);
	struct bcm_data *bcm = hu->priv;
	struct sk_buff *skb;

	if (!test_bit(HCI_RUNNING, &hdev->flags))
		return -ENETDOWN;

	skb = bt_skb_alloc(3, GFP_KERNEL);
262 263
	if (!skb)
		return -ENOMEM;
264 265 266 267 268 269 270 271 272 273 274

	*skb_put(skb, 1) = BCM_LM_DIAG_PKT;
	*skb_put(skb, 1) = 0xf0;
	*skb_put(skb, 1) = enable;

	skb_queue_tail(&bcm->txq, skb);
	hci_uart_tx_wakeup(hu);

	return 0;
}

275 276 277
static int bcm_open(struct hci_uart *hu)
{
	struct bcm_data *bcm;
278
	struct list_head *p;
279

280
	bt_dev_dbg(hu->hdev, "hu %p", hu);
281 282 283 284 285 286 287 288

	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
	if (!bcm)
		return -ENOMEM;

	skb_queue_head_init(&bcm->txq);

	hu->priv = bcm;
289

290
	mutex_lock(&bcm_device_lock);
291 292 293 294 295 296 297 298 299
	list_for_each(p, &bcm_device_list) {
		struct bcm_device *dev = list_entry(p, struct bcm_device, list);

		/* Retrieve saved bcm_device based on parent of the
		 * platform device (saved during device probe) and
		 * parent of tty device used by hci_uart
		 */
		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
			bcm->dev = dev;
300
			hu->init_speed = dev->init_speed;
301
#ifdef CONFIG_PM
302 303
			dev->hu = hu;
#endif
304
			bcm_gpio_set_power(bcm->dev, true);
305 306 307 308
			break;
		}
	}

309
	mutex_unlock(&bcm_device_lock);
310

311 312 313 314 315 316
	return 0;
}

static int bcm_close(struct hci_uart *hu)
{
	struct bcm_data *bcm = hu->priv;
317
	struct bcm_device *bdev = bcm->dev;
318

319
	bt_dev_dbg(hu->hdev, "hu %p", hu);
320

321
	/* Protect bcm->dev against removal of the device or driver */
322
	mutex_lock(&bcm_device_lock);
323 324
	if (bcm_device_exists(bdev)) {
		bcm_gpio_set_power(bdev, false);
325
#ifdef CONFIG_PM
326 327 328
		pm_runtime_disable(&bdev->pdev->dev);
		pm_runtime_set_suspended(&bdev->pdev->dev);

329 330 331 332 333 334
		if (device_can_wakeup(&bdev->pdev->dev)) {
			devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
			device_init_wakeup(&bdev->pdev->dev, false);
		}

		bdev->hu = NULL;
335 336
#endif
	}
337
	mutex_unlock(&bcm_device_lock);
338

339 340 341 342 343 344 345 346 347 348 349 350
	skb_queue_purge(&bcm->txq);
	kfree_skb(bcm->rx_skb);
	kfree(bcm);

	hu->priv = NULL;
	return 0;
}

static int bcm_flush(struct hci_uart *hu)
{
	struct bcm_data *bcm = hu->priv;

351
	bt_dev_dbg(hu->hdev, "hu %p", hu);
352 353 354 355 356 357 358 359

	skb_queue_purge(&bcm->txq);

	return 0;
}

static int bcm_setup(struct hci_uart *hu)
{
360
	struct bcm_data *bcm = hu->priv;
361 362
	char fw_name[64];
	const struct firmware *fw;
363
	unsigned int speed;
364 365
	int err;

366
	bt_dev_dbg(hu->hdev, "hu %p", hu);
367

368
	hu->hdev->set_diag = bcm_set_diag;
369 370
	hu->hdev->set_bdaddr = btbcm_set_bdaddr;

371 372 373 374 375 376
	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
	if (err)
		return err;

	err = request_firmware(&fw, fw_name, &hu->hdev->dev);
	if (err < 0) {
377
		bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
378 379 380 381 382
		return 0;
	}

	err = btbcm_patchram(hu->hdev, fw);
	if (err) {
383
		bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
384 385 386
		goto finalize;
	}

387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407
	/* Init speed if any */
	if (hu->init_speed)
		speed = hu->init_speed;
	else if (hu->proto->init_speed)
		speed = hu->proto->init_speed;
	else
		speed = 0;

	if (speed)
		hci_uart_set_baudrate(hu, speed);

	/* Operational speed if any */
	if (hu->oper_speed)
		speed = hu->oper_speed;
	else if (hu->proto->oper_speed)
		speed = hu->proto->oper_speed;
	else
		speed = 0;

	if (speed) {
		err = bcm_set_baudrate(hu, speed);
408
		if (!err)
409
			hci_uart_set_baudrate(hu, speed);
410 411
	}

412 413 414 415
finalize:
	release_firmware(fw);

	err = btbcm_finalize(hu->hdev);
416 417 418 419 420 421
	if (err)
		return err;

	err = bcm_request_irq(bcm);
	if (!err)
		err = bcm_setup_sleep(hu);
422 423

	return err;
424 425
}

426 427 428 429 430 431 432
#define BCM_RECV_LM_DIAG \
	.type = BCM_LM_DIAG_PKT, \
	.hlen = BCM_LM_DIAG_SIZE, \
	.loff = 0, \
	.lsize = 0, \
	.maxlen = BCM_LM_DIAG_SIZE

433
static const struct h4_recv_pkt bcm_recv_pkts[] = {
434 435 436 437
	{ H4_RECV_ACL,      .recv = hci_recv_frame },
	{ H4_RECV_SCO,      .recv = hci_recv_frame },
	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
438 439
};

440 441 442 443 444 445 446
static int bcm_recv(struct hci_uart *hu, const void *data, int count)
{
	struct bcm_data *bcm = hu->priv;

	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
		return -EUNATCH;

447 448
	bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
449 450
	if (IS_ERR(bcm->rx_skb)) {
		int err = PTR_ERR(bcm->rx_skb);
451
		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
452
		bcm->rx_skb = NULL;
453
		return err;
454 455 456 457 458 459 460 461 462
	} else if (!bcm->rx_skb) {
		/* Delay auto-suspend when receiving completed packet */
		mutex_lock(&bcm_device_lock);
		if (bcm->dev && bcm_device_exists(bcm->dev)) {
			pm_runtime_get(&bcm->dev->pdev->dev);
			pm_runtime_mark_last_busy(&bcm->dev->pdev->dev);
			pm_runtime_put_autosuspend(&bcm->dev->pdev->dev);
		}
		mutex_unlock(&bcm_device_lock);
463 464 465 466 467 468 469 470 471
	}

	return count;
}

static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
	struct bcm_data *bcm = hu->priv;

472
	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
473 474

	/* Prepend skb with frame type */
475
	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
476 477 478 479 480 481 482 483
	skb_queue_tail(&bcm->txq, skb);

	return 0;
}

static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
{
	struct bcm_data *bcm = hu->priv;
484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500
	struct sk_buff *skb = NULL;
	struct bcm_device *bdev = NULL;

	mutex_lock(&bcm_device_lock);

	if (bcm_device_exists(bcm->dev)) {
		bdev = bcm->dev;
		pm_runtime_get_sync(&bdev->pdev->dev);
		/* Shall be resumed here */
	}

	skb = skb_dequeue(&bcm->txq);

	if (bdev) {
		pm_runtime_mark_last_busy(&bdev->pdev->dev);
		pm_runtime_put_autosuspend(&bdev->pdev->dev);
	}
501

502 503 504
	mutex_unlock(&bcm_device_lock);

	return skb;
505 506
}

507 508
#ifdef CONFIG_PM
static int bcm_suspend_device(struct device *dev)
509 510 511
{
	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));

512
	bt_dev_dbg(bdev, "");
513

514
	if (!bdev->is_suspended && bdev->hu) {
515 516
		hci_uart_set_flow_control(bdev->hu, true);

517
		/* Once this returns, driver suspends BT via GPIO */
518 519 520 521 522 523
		bdev->is_suspended = true;
	}

	/* Suspend the device */
	if (bdev->device_wakeup) {
		gpiod_set_value(bdev->device_wakeup, false);
524
		bt_dev_dbg(bdev, "suspend, delaying 15 ms");
525 526 527
		mdelay(15);
	}

528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571
	return 0;
}

static int bcm_resume_device(struct device *dev)
{
	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));

	bt_dev_dbg(bdev, "");

	if (bdev->device_wakeup) {
		gpiod_set_value(bdev->device_wakeup, true);
		bt_dev_dbg(bdev, "resume, delaying 15 ms");
		mdelay(15);
	}

	/* When this executes, the device has woken up already */
	if (bdev->is_suspended && bdev->hu) {
		bdev->is_suspended = false;

		hci_uart_set_flow_control(bdev->hu, false);
	}

	return 0;
}
#endif

#ifdef CONFIG_PM_SLEEP
/* Platform suspend callback */
static int bcm_suspend(struct device *dev)
{
	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
	int error;

	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);

	/* bcm_suspend can be called at any time as long as platform device is
	 * bound, so it should use bcm_device_lock to protect access to hci_uart
	 * and device_wake-up GPIO.
	 */
	mutex_lock(&bcm_device_lock);

	if (!bdev->hu)
		goto unlock;

572 573
	if (pm_runtime_active(dev))
		bcm_suspend_device(dev);
574

575 576 577 578 579 580
	if (device_may_wakeup(&bdev->pdev->dev)) {
		error = enable_irq_wake(bdev->irq);
		if (!error)
			bt_dev_dbg(bdev, "BCM irq: enabled");
	}

581
unlock:
582
	mutex_unlock(&bcm_device_lock);
583

584 585 586 587 588 589 590 591
	return 0;
}

/* Platform resume callback */
static int bcm_resume(struct device *dev)
{
	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));

592
	bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
593

594 595 596 597
	/* bcm_resume can be called at any time as long as platform device is
	 * bound, so it should use bcm_device_lock to protect access to hci_uart
	 * and device_wake-up GPIO.
	 */
598
	mutex_lock(&bcm_device_lock);
599 600 601 602

	if (!bdev->hu)
		goto unlock;

603 604 605 606 607
	if (device_may_wakeup(&bdev->pdev->dev)) {
		disable_irq_wake(bdev->irq);
		bt_dev_dbg(bdev, "BCM irq: disabled");
	}

608
	bcm_resume_device(dev);
609

610
unlock:
611
	mutex_unlock(&bcm_device_lock);
612

613 614 615 616
	pm_runtime_disable(dev);
	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);

617 618 619 620
	return 0;
}
#endif

621 622
static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
623
static const struct acpi_gpio_params host_wakeup_gpios = { 2, 0, false };
624 625 626 627

static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
	{ "device-wakeup-gpios", &device_wakeup_gpios, 1 },
	{ "shutdown-gpios", &shutdown_gpios, 1 },
628
	{ "host-wakeup-gpios", &host_wakeup_gpios, 1 },
629 630 631
	{ },
};

632
#ifdef CONFIG_ACPI
633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648
static u8 acpi_active_low = ACPI_ACTIVE_LOW;

/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
	{
		.ident = "Asus T100TA",
		.matches = {
			DMI_EXACT_MATCH(DMI_SYS_VENDOR,
					"ASUSTeK COMPUTER INC."),
			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
		},
		.driver_data = &acpi_active_low,
	},
	{ }
};

649 650 651
static int bcm_resource(struct acpi_resource *ares, void *data)
{
	struct bcm_device *dev = data;
652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668
	struct acpi_resource_extended_irq *irq;
	struct acpi_resource_gpio *gpio;
	struct acpi_resource_uart_serialbus *sb;

	switch (ares->type) {
	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
		irq = &ares->data.extended_irq;
		dev->irq_polarity = irq->polarity;
		break;

	case ACPI_RESOURCE_TYPE_GPIO:
		gpio = &ares->data.gpio;
		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
			dev->irq_polarity = gpio->polarity;
		break;

	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
669 670 671
		sb = &ares->data.uart_serial_bus;
		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
			dev->init_speed = sb->default_baud_rate;
672 673 674 675
		break;

	default:
		break;
676 677 678 679 680 681
	}

	/* Always tell the ACPI core to skip this resource */
	return 1;
}

682 683 684
static int bcm_acpi_probe(struct bcm_device *dev)
{
	struct platform_device *pdev = dev->pdev;
685
	LIST_HEAD(resources);
686
	const struct dmi_system_id *dmi_id;
687 688 689 690 691 692 693 694 695 696 697
	int ret;

	/* Retrieve GPIO data */
	dev->name = dev_name(&pdev->dev);
	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
					acpi_bcm_default_gpios);
	if (ret)
		return ret;

	dev->clk = devm_clk_get(&pdev->dev, NULL);

698 699 700 701 702
	dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
						     "device-wakeup",
						     GPIOD_OUT_LOW);
	if (IS_ERR(dev->device_wakeup))
		return PTR_ERR(dev->device_wakeup);
703

704 705 706 707
	dev->shutdown = devm_gpiod_get_optional(&pdev->dev, "shutdown",
						GPIOD_OUT_LOW);
	if (IS_ERR(dev->shutdown))
		return PTR_ERR(dev->shutdown);
708

709 710 711 712 713 714 715 716 717 718 719 720 721 722 723
	/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
	dev->irq = platform_get_irq(pdev, 0);
	if (dev->irq <= 0) {
		struct gpio_desc *gpio;

		gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
					       GPIOD_IN);
		if (IS_ERR(gpio))
			return PTR_ERR(gpio);

		dev->irq = gpiod_to_irq(gpio);
	}

	dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);

724 725 726 727 728 729 730 731
	/* Make sure at-least one of the GPIO is defined and that
	 * a name is specified for this instance
	 */
	if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
		dev_err(&pdev->dev, "invalid platform data\n");
		return -EINVAL;
	}

732
	/* Retrieve UART ACPI info */
733 734
	ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
				     &resources, bcm_resource, dev);
735 736
	if (ret < 0)
		return ret;
737
	acpi_dev_free_resource_list(&resources);
738

739 740 741 742 743 744 745
	dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
	if (dmi_id) {
		bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
			    dmi_id->ident);
		dev->irq_polarity = *(u8 *)dmi_id->driver_data;
	}

746 747
	return 0;
}
748 749 750 751 752 753
#else
static int bcm_acpi_probe(struct bcm_device *dev)
{
	return -EINVAL;
}
#endif /* CONFIG_ACPI */
754 755 756 757 758 759 760 761 762 763 764 765

static int bcm_probe(struct platform_device *pdev)
{
	struct bcm_device *dev;
	int ret;

	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
	if (!dev)
		return -ENOMEM;

	dev->pdev = pdev;

766 767 768
	ret = bcm_acpi_probe(dev);
	if (ret)
		return ret;
769 770 771 772 773 774

	platform_set_drvdata(pdev, dev);

	dev_info(&pdev->dev, "%s device registered.\n", dev->name);

	/* Place this instance on the device list */
775
	mutex_lock(&bcm_device_lock);
776
	list_add_tail(&dev->list, &bcm_device_list);
777
	mutex_unlock(&bcm_device_lock);
778 779 780 781 782 783 784 785 786 787

	bcm_gpio_set_power(dev, false);

	return 0;
}

static int bcm_remove(struct platform_device *pdev)
{
	struct bcm_device *dev = platform_get_drvdata(pdev);

788
	mutex_lock(&bcm_device_lock);
789
	list_del(&dev->list);
790
	mutex_unlock(&bcm_device_lock);
791 792 793 794 795 796 797 798

	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));

	dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);

	return 0;
}

799 800 801
static const struct hci_uart_proto bcm_proto = {
	.id		= HCI_UART_BCM,
	.name		= "BCM",
802
	.manufacturer	= 15,
803 804
	.init_speed	= 115200,
	.oper_speed	= 4000000,
805 806 807 808
	.open		= bcm_open,
	.close		= bcm_close,
	.flush		= bcm_flush,
	.setup		= bcm_setup,
809
	.set_baudrate	= bcm_set_baudrate,
810 811 812 813 814
	.recv		= bcm_recv,
	.enqueue	= bcm_enqueue,
	.dequeue	= bcm_dequeue,
};

815 816
#ifdef CONFIG_ACPI
static const struct acpi_device_id bcm_acpi_match[] = {
817
	{ "BCM2E1A", 0 },
818
	{ "BCM2E39", 0 },
819
	{ "BCM2E3A", 0 },
820
	{ "BCM2E3D", 0 },
821
	{ "BCM2E3F", 0 },
822
	{ "BCM2E40", 0 },
823
	{ "BCM2E54", 0 },
824
	{ "BCM2E55", 0 },
825
	{ "BCM2E64", 0 },
826
	{ "BCM2E65", 0 },
827
	{ "BCM2E67", 0 },
828
	{ "BCM2E71", 0 },
829
	{ "BCM2E7B", 0 },
830
	{ "BCM2E7C", 0 },
831 832 833 834 835
	{ },
};
MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
#endif

836
/* Platform suspend and resume callbacks */
837 838 839 840
static const struct dev_pm_ops bcm_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
	SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
};
841

842 843 844 845 846 847
static struct platform_driver bcm_driver = {
	.probe = bcm_probe,
	.remove = bcm_remove,
	.driver = {
		.name = "hci_bcm",
		.acpi_match_table = ACPI_PTR(bcm_acpi_match),
848
		.pm = &bcm_pm_ops,
849 850 851
	},
};

852 853
int __init bcm_init(void)
{
854 855
	platform_driver_register(&bcm_driver);

856 857 858 859 860
	return hci_uart_register_proto(&bcm_proto);
}

int __exit bcm_deinit(void)
{
861 862
	platform_driver_unregister(&bcm_driver);

863 864
	return hci_uart_unregister_proto(&bcm_proto);
}