bmp085.c 12.7 KB
Newer Older
1
/*  Copyright (c) 2010  Christoph Mair <christoph.mair@gmail.com>
E
Eric Andersson 已提交
2 3 4
 *  Copyright (c) 2012  Bosch Sensortec GmbH
 *  Copyright (c) 2012  Unixphere AB
 *
5 6 7
 *  This driver supports the bmp085 and bmp18x digital barometric pressure
 *  and temperature sensors from Bosch Sensortec. The datasheets
 *  are available from their website:
E
Eric Andersson 已提交
8
 *  http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
9
 *  http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
E
Eric Andersson 已提交
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
 *
 *  A pressure measurement is issued by reading from pressure0_input.
 *  The return value ranges from 30000 to 110000 pascal with a resulution
 *  of 1 pascal (0.01 millibar) which enables measurements from 9000m above
 *  to 500m below sea level.
 *
 *  The temperature can be read from temp0_input. Values range from
 *  -400 to 850 representing the ambient temperature in degree celsius
 *  multiplied by 10.The resolution is 0.1 celsius.
 *
 *  Because ambient pressure is temperature dependent, a temperature
 *  measurement will be executed automatically even if the user is reading
 *  from pressure0_input. This happens if the last temperature measurement
 *  has been executed more then one second ago.
 *
 *  To decrease RMS noise from pressure measurements, the bmp085 can
 *  autonomously calculate the average of up to eight samples. This is
 *  set up by writing to the oversampling sysfs file. Accepted values
 *  are 0, 1, 2 and 3. 2^x when x is the value written to this file
 *  specifies the number of samples used to calculate the ambient pressure.
 *  RMS noise is specified with six pascal (without averaging) and decreases
 *  down to 3 pascal when using an oversampling setting of 3.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
47 48

#include <linux/module.h>
E
Eric Andersson 已提交
49
#include <linux/device.h>
50 51 52
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
53
#include <linux/of.h>
54
#include "bmp085.h"
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

#define BMP085_CHIP_ID			0x55
#define BMP085_CALIBRATION_DATA_START	0xAA
#define BMP085_CALIBRATION_DATA_LENGTH	11	/* 16 bit values */
#define BMP085_CHIP_ID_REG		0xD0
#define BMP085_CTRL_REG			0xF4
#define BMP085_TEMP_MEASUREMENT		0x2E
#define BMP085_PRESSURE_MEASUREMENT	0x34
#define BMP085_CONVERSION_REGISTER_MSB	0xF6
#define BMP085_CONVERSION_REGISTER_LSB	0xF7
#define BMP085_CONVERSION_REGISTER_XLSB	0xF8
#define BMP085_TEMP_CONVERSION_TIME	5

struct bmp085_calibration_data {
	s16 AC1, AC2, AC3;
	u16 AC4, AC5, AC6;
	s16 B1, B2;
	s16 MB, MC, MD;
};

struct bmp085_data {
76 77
	struct	device *dev;
	struct  regmap *regmap;
E
Eric Andersson 已提交
78 79 80 81 82 83
	struct	mutex lock;
	struct	bmp085_calibration_data calibration;
	u8	oversampling_setting;
	u32	raw_temperature;
	u32	raw_pressure;
	u32	temp_measurement_period;
84
	unsigned long last_temp_measurement;
85
	u8	chip_id;
E
Eric Andersson 已提交
86
	s32	b6; /* calculated temperature correction coefficient */
87 88
};

89
static s32 bmp085_read_calibration_data(struct bmp085_data *data)
90 91 92
{
	u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
	struct bmp085_calibration_data *cali = &(data->calibration);
93 94 95
	s32 status = regmap_bulk_read(data->regmap,
				BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
				(BMP085_CALIBRATION_DATA_LENGTH << 1));
96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
	if (status < 0)
		return status;

	cali->AC1 =  be16_to_cpu(tmp[0]);
	cali->AC2 =  be16_to_cpu(tmp[1]);
	cali->AC3 =  be16_to_cpu(tmp[2]);
	cali->AC4 =  be16_to_cpu(tmp[3]);
	cali->AC5 =  be16_to_cpu(tmp[4]);
	cali->AC6 = be16_to_cpu(tmp[5]);
	cali->B1 = be16_to_cpu(tmp[6]);
	cali->B2 = be16_to_cpu(tmp[7]);
	cali->MB = be16_to_cpu(tmp[8]);
	cali->MC = be16_to_cpu(tmp[9]);
	cali->MD = be16_to_cpu(tmp[10]);
	return 0;
}

static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
{
	u16 tmp;
	s32 status;

	mutex_lock(&data->lock);
119 120
	status = regmap_write(data->regmap, BMP085_CTRL_REG,
			      BMP085_TEMP_MEASUREMENT);
E
Eric Andersson 已提交
121
	if (status < 0) {
122
		dev_err(data->dev,
123 124 125 126 127
			"Error while requesting temperature measurement.\n");
		goto exit;
	}
	msleep(BMP085_TEMP_CONVERSION_TIME);

128 129 130 131
	status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
				 &tmp, sizeof(tmp));
	if (status < 0) {
		dev_err(data->dev,
132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149
			"Error while reading temperature measurement result\n");
		goto exit;
	}
	data->raw_temperature = be16_to_cpu(tmp);
	data->last_temp_measurement = jiffies;
	status = 0;	/* everything ok, return 0 */

exit:
	mutex_unlock(&data->lock);
	return status;
}

static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
{
	u32 tmp = 0;
	s32 status;

	mutex_lock(&data->lock);
150
	status = regmap_write(data->regmap, BMP085_CTRL_REG,
E
Eric Andersson 已提交
151 152 153
			BMP085_PRESSURE_MEASUREMENT +
			(data->oversampling_setting << 6));
	if (status < 0) {
154
		dev_err(data->dev,
155 156 157 158 159 160 161 162
			"Error while requesting pressure measurement.\n");
		goto exit;
	}

	/* wait for the end of conversion */
	msleep(2+(3 << data->oversampling_setting));

	/* copy data into a u32 (4 bytes), but skip the first byte. */
163 164 165 166
	status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
				 ((u8 *)&tmp)+1, 3);
	if (status < 0) {
		dev_err(data->dev,
167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189
			"Error while reading pressure measurement results\n");
		goto exit;
	}
	data->raw_pressure = be32_to_cpu((tmp));
	data->raw_pressure >>= (8-data->oversampling_setting);
	status = 0;	/* everything ok, return 0 */

exit:
	mutex_unlock(&data->lock);
	return status;
}

/*
 * This function starts the temperature measurement and returns the value
 * in tenth of a degree celsius.
 */
static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
{
	struct bmp085_calibration_data *cali = &data->calibration;
	long x1, x2;
	int status;

	status = bmp085_update_raw_temperature(data);
E
Eric Andersson 已提交
190
	if (status < 0)
191 192 193 194 195 196 197 198 199 200
		goto exit;

	x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
	x2 = (cali->MC << 11) / (x1 + cali->MD);
	data->b6 = x1 + x2 - 4000;
	/* if NULL just update b6. Used for pressure only measurements */
	if (temperature != NULL)
		*temperature = (x1+x2+8) >> 4;

exit:
201
	return status;
202 203 204 205 206
}

/*
 * This function starts the pressure measurement and returns the value
 * in millibar. Since the pressure depends on the ambient temperature,
E
Eric Andersson 已提交
207 208 209 210
 * a temperature measurement is executed according to the given temperature
 * measurement period (default is 1 sec boundary). This period could vary
 * and needs to be adjusted according to the sensor environment, i.e. if big
 * temperature variations then the temperature needs to be read out often.
211 212 213 214 215 216 217 218 219 220
 */
static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
{
	struct bmp085_calibration_data *cali = &data->calibration;
	s32 x1, x2, x3, b3;
	u32 b4, b7;
	s32 p;
	int status;

	/* alt least every second force an update of the ambient temperature */
E
Eric Andersson 已提交
221 222
	if ((data->last_temp_measurement == 0) ||
	    time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
223
		status = bmp085_get_temperature(data, NULL);
E
Eric Andersson 已提交
224 225
		if (status < 0)
			return status;
226 227 228
	}

	status = bmp085_update_raw_pressure(data);
E
Eric Andersson 已提交
229 230
	if (status < 0)
		return status;
231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260

	x1 = (data->b6 * data->b6) >> 12;
	x1 *= cali->B2;
	x1 >>= 11;

	x2 = cali->AC2 * data->b6;
	x2 >>= 11;

	x3 = x1 + x2;

	b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
	b3 >>= 2;

	x1 = (cali->AC3 * data->b6) >> 13;
	x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
	x3 = (x1 + x2 + 2) >> 2;
	b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;

	b7 = ((u32)data->raw_pressure - b3) *
					(50000 >> data->oversampling_setting);
	p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));

	x1 = p >> 8;
	x1 *= x1;
	x1 = (x1 * 3038) >> 16;
	x2 = (-7357 * p) >> 16;
	p += (x1 + x2 + 3791) >> 4;

	*pressure = p;

E
Eric Andersson 已提交
261
	return 0;
262 263 264 265 266 267
}

/*
 * This function sets the chip-internal oversampling. Valid values are 0..3.
 * The chip will use 2^oversampling samples for internal averaging.
 * This influences the measurement time and the accuracy; larger values
E
Eric Andersson 已提交
268
 * increase both. The datasheet gives an overview on how measurement time,
269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291
 * accuracy and noise correlate.
 */
static void bmp085_set_oversampling(struct bmp085_data *data,
						unsigned char oversampling)
{
	if (oversampling > 3)
		oversampling = 3;
	data->oversampling_setting = oversampling;
}

/*
 * Returns the currently selected oversampling. Range: 0..3
 */
static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
{
	return data->oversampling_setting;
}

/* sysfs callbacks */
static ssize_t set_oversampling(struct device *dev,
				struct device_attribute *attr,
				const char *buf, size_t count)
{
292
	struct bmp085_data *data = dev_get_drvdata(dev);
293
	unsigned long oversampling;
E
Eric Andersson 已提交
294 295 296 297
	int err = kstrtoul(buf, 10, &oversampling);

	if (err == 0) {
		mutex_lock(&data->lock);
298
		bmp085_set_oversampling(data, oversampling);
E
Eric Andersson 已提交
299
		mutex_unlock(&data->lock);
300 301
		return count;
	}
E
Eric Andersson 已提交
302 303

	return err;
304 305 306 307 308
}

static ssize_t show_oversampling(struct device *dev,
				 struct device_attribute *attr, char *buf)
{
309
	struct bmp085_data *data = dev_get_drvdata(dev);
E
Eric Andersson 已提交
310

311 312 313 314 315 316 317 318 319 320 321
	return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
}
static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
					show_oversampling, set_oversampling);


static ssize_t show_temperature(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	int temperature;
	int status;
322
	struct bmp085_data *data = dev_get_drvdata(dev);
323 324

	status = bmp085_get_temperature(data, &temperature);
E
Eric Andersson 已提交
325
	if (status < 0)
326 327 328 329 330 331 332 333 334 335 336 337
		return status;
	else
		return sprintf(buf, "%d\n", temperature);
}
static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);


static ssize_t show_pressure(struct device *dev,
			     struct device_attribute *attr, char *buf)
{
	int pressure;
	int status;
338
	struct bmp085_data *data = dev_get_drvdata(dev);
339 340

	status = bmp085_get_pressure(data, &pressure);
E
Eric Andersson 已提交
341
	if (status < 0)
342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359
		return status;
	else
		return sprintf(buf, "%d\n", pressure);
}
static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);


static struct attribute *bmp085_attributes[] = {
	&dev_attr_temp0_input.attr,
	&dev_attr_pressure0_input.attr,
	&dev_attr_oversampling.attr,
	NULL
};

static const struct attribute_group bmp085_attr_group = {
	.attrs = bmp085_attributes,
};

360
int bmp085_detect(struct device *dev)
361
{
362 363 364 365 366 367 368
	struct bmp085_data *data = dev_get_drvdata(dev);
	unsigned int id;
	int ret;

	ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
	if (ret < 0)
		return ret;
369

370
	if (id != data->chip_id)
371 372 373 374
		return -ENODEV;

	return 0;
}
375
EXPORT_SYMBOL_GPL(bmp085_detect);
376

377
static void __init bmp085_get_of_properties(struct bmp085_data *data)
378 379
{
#ifdef CONFIG_OF
380
	struct device_node *np = data->dev->of_node;
381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396
	u32 prop;

	if (!np)
		return;

	if (!of_property_read_u32(np, "chip-id", &prop))
		data->chip_id = prop & 0xff;

	if (!of_property_read_u32(np, "temp-measurement-period", &prop))
		data->temp_measurement_period = (prop/100)*HZ;

	if (!of_property_read_u32(np, "default-oversampling", &prop))
		data->oversampling_setting = prop & 0xff;
#endif
}

397
static int bmp085_init_client(struct bmp085_data *data)
398
{
399
	int status = bmp085_read_calibration_data(data);
E
Eric Andersson 已提交
400 401 402 403

	if (status < 0)
		return status;

404 405
	/* default settings */
	data->chip_id = BMP085_CHIP_ID;
406
	data->last_temp_measurement = 0;
E
Eric Andersson 已提交
407
	data->temp_measurement_period = 1*HZ;
408
	data->oversampling_setting = 3;
409

410
	bmp085_get_of_properties(data);
411

412
	mutex_init(&data->lock);
E
Eric Andersson 已提交
413 414

	return 0;
415 416
}

417 418 419 420 421 422 423
struct regmap_config bmp085_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8
};
EXPORT_SYMBOL_GPL(bmp085_regmap_config);

__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
424 425 426 427 428 429 430 431 432 433
{
	struct bmp085_data *data;
	int err = 0;

	data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
	if (!data) {
		err = -ENOMEM;
		goto exit;
	}

434 435 436
	dev_set_drvdata(dev, data);
	data->dev = dev;
	data->regmap = regmap;
437 438

	/* Initialize the BMP085 chip */
439
	err = bmp085_init_client(data);
E
Eric Andersson 已提交
440
	if (err < 0)
441 442
		goto exit_free;

443 444 445 446 447 448
	err = bmp085_detect(dev);
	if (err < 0) {
		dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
		goto exit_free;
	}

449
	/* Register sysfs hooks */
450
	err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
451 452 453
	if (err)
		goto exit_free;

454
	dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
E
Eric Andersson 已提交
455 456

	return 0;
457 458 459 460 461 462

exit_free:
	kfree(data);
exit:
	return err;
}
463
EXPORT_SYMBOL_GPL(bmp085_probe);
464

465
int bmp085_remove(struct device *dev)
466
{
467
	struct bmp085_data *data = dev_get_drvdata(dev);
E
Eric Andersson 已提交
468

469
	sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
E
Eric Andersson 已提交
470 471
	kfree(data);

472 473
	return 0;
}
474
EXPORT_SYMBOL_GPL(bmp085_remove);
475

E
Eric Andersson 已提交
476
MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
477 478
MODULE_DESCRIPTION("BMP085 driver");
MODULE_LICENSE("GPL");