platform.c 11.4 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3 4 5
/*
 * Platform device support for Au1x00 SoCs.
 *
 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
 *
6 7 8
 * (C) Copyright Embedded Alley Solutions, Inc 2005
 * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
 *
L
Linus Torvalds 已提交
9 10 11 12
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */
13

14
#include <linux/dma-mapping.h>
15
#include <linux/platform_device.h>
16
#include <linux/serial_8250.h>
L
Linus Torvalds 已提交
17 18
#include <linux/init.h>

P
Pete Popov 已提交
19
#include <asm/mach-au1x00/au1xxx.h>
20 21
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
22
#include <asm/mach-au1x00/au1xxx_eth.h>
L
Linus Torvalds 已提交
23

24 25 26 27 28 29
#define PORT(_base, _irq)					\
	{							\
		.mapbase	= _base,			\
		.irq		= _irq,				\
		.regshift	= 2,				\
		.iotype		= UPIO_AU,			\
30 31 32
		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
				  UPF_FIXED_TYPE,		\
		.type		= PORT_16550A,			\
33 34 35 36 37
	}

static struct plat_serial8250_port au1x00_uart_data[] = {
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_SOC_AU1000)
38 39 40 41
	PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
	PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
	PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
	PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
42
#elif defined(CONFIG_SOC_AU1500)
43 44
	PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
	PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
45
#elif defined(CONFIG_SOC_AU1100)
46 47 48
	PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
	PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
	PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
49
#elif defined(CONFIG_SOC_AU1550)
50 51 52
	PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
	PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
	PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
53
#elif defined(CONFIG_SOC_AU1200)
54 55
	PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
	PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
56 57 58 59 60 61 62 63 64 65 66 67 68
#endif
#endif	/* CONFIG_SERIAL_8250_AU1X00 */
	{ },
};

static struct platform_device au1xx0_uart_device = {
	.name			= "serial8250",
	.id			= PLAT8250_DEV_AU1X00,
	.dev			= {
		.platform_data	= au1x00_uart_data,
	},
};

P
Pete Popov 已提交
69
/* OHCI (USB full speed host controller) */
L
Linus Torvalds 已提交
70 71 72
static struct resource au1xxx_usb_ohci_resources[] = {
	[0] = {
		.start		= USB_OHCI_BASE,
J
Jordan Crouse 已提交
73
		.end		= USB_OHCI_BASE + USB_OHCI_LEN - 1,
L
Linus Torvalds 已提交
74 75 76
		.flags		= IORESOURCE_MEM,
	},
	[1] = {
77 78
		.start		= FOR_PLATFORM_C_USB_HOST_INT,
		.end		= FOR_PLATFORM_C_USB_HOST_INT,
L
Linus Torvalds 已提交
79 80 81 82 83
		.flags		= IORESOURCE_IRQ,
	},
};

/* The dmamask must be set for OHCI to work */
84
static u64 ohci_dmamask = DMA_BIT_MASK(32);
L
Linus Torvalds 已提交
85 86 87 88 89 90

static struct platform_device au1xxx_usb_ohci_device = {
	.name		= "au1xxx-ohci",
	.id		= 0,
	.dev = {
		.dma_mask		= &ohci_dmamask,
91
		.coherent_dma_mask	= DMA_BIT_MASK(32),
L
Linus Torvalds 已提交
92 93 94 95 96
	},
	.num_resources	= ARRAY_SIZE(au1xxx_usb_ohci_resources),
	.resource	= au1xxx_usb_ohci_resources,
};

P
Pete Popov 已提交
97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112
/*** AU1100 LCD controller ***/

#ifdef CONFIG_FB_AU1100
static struct resource au1100_lcd_resources[] = {
	[0] = {
		.start          = LCD_PHYS_ADDR,
		.end            = LCD_PHYS_ADDR + 0x800 - 1,
		.flags          = IORESOURCE_MEM,
	},
	[1] = {
		.start          = AU1100_LCD_INT,
		.end            = AU1100_LCD_INT,
		.flags          = IORESOURCE_IRQ,
	}
};

113
static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
P
Pete Popov 已提交
114 115 116 117 118 119

static struct platform_device au1100_lcd_device = {
	.name           = "au1100-lcd",
	.id             = 0,
	.dev = {
		.dma_mask               = &au1100_lcd_dmamask,
120
		.coherent_dma_mask      = DMA_BIT_MASK(32),
P
Pete Popov 已提交
121 122 123 124 125 126
	},
	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
	.resource       = au1100_lcd_resources,
};
#endif

P
Pete Popov 已提交
127 128 129 130 131 132 133 134 135
#ifdef CONFIG_SOC_AU1200
/* EHCI (USB high speed host controller) */
static struct resource au1xxx_usb_ehci_resources[] = {
	[0] = {
		.start		= USB_EHCI_BASE,
		.end		= USB_EHCI_BASE + USB_EHCI_LEN - 1,
		.flags		= IORESOURCE_MEM,
	},
	[1] = {
136 137
		.start		= AU1200_USB_INT,
		.end		= AU1200_USB_INT,
P
Pete Popov 已提交
138 139 140 141
		.flags		= IORESOURCE_IRQ,
	},
};

142
static u64 ehci_dmamask = DMA_BIT_MASK(32);
P
Pete Popov 已提交
143 144 145 146 147 148

static struct platform_device au1xxx_usb_ehci_device = {
	.name		= "au1xxx-ehci",
	.id		= 0,
	.dev = {
		.dma_mask		= &ehci_dmamask,
149
		.coherent_dma_mask	= DMA_BIT_MASK(32),
P
Pete Popov 已提交
150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168
	},
	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
	.resource	= au1xxx_usb_ehci_resources,
};

/* Au1200 UDC (USB gadget controller) */
static struct resource au1xxx_usb_gdt_resources[] = {
	[0] = {
		.start		= USB_UDC_BASE,
		.end		= USB_UDC_BASE + USB_UDC_LEN - 1,
		.flags		= IORESOURCE_MEM,
	},
	[1] = {
		.start		= AU1200_USB_INT,
		.end		= AU1200_USB_INT,
		.flags		= IORESOURCE_IRQ,
	},
};

169
static u64 udc_dmamask = DMA_BIT_MASK(32);
P
Pete Popov 已提交
170 171 172 173 174 175

static struct platform_device au1xxx_usb_gdt_device = {
	.name		= "au1xxx-udc",
	.id		= 0,
	.dev = {
		.dma_mask		= &udc_dmamask,
176
		.coherent_dma_mask	= DMA_BIT_MASK(32),
P
Pete Popov 已提交
177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195
	},
	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
	.resource	= au1xxx_usb_gdt_resources,
};

/* Au1200 UOC (USB OTG controller) */
static struct resource au1xxx_usb_otg_resources[] = {
	[0] = {
		.start		= USB_UOC_BASE,
		.end		= USB_UOC_BASE + USB_UOC_LEN - 1,
		.flags		= IORESOURCE_MEM,
	},
	[1] = {
		.start		= AU1200_USB_INT,
		.end		= AU1200_USB_INT,
		.flags		= IORESOURCE_IRQ,
	},
};

196
static u64 uoc_dmamask = DMA_BIT_MASK(32);
P
Pete Popov 已提交
197 198 199 200 201 202

static struct platform_device au1xxx_usb_otg_device = {
	.name		= "au1xxx-uoc",
	.id		= 0,
	.dev = {
		.dma_mask		= &uoc_dmamask,
203
		.coherent_dma_mask	= DMA_BIT_MASK(32),
P
Pete Popov 已提交
204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221
	},
	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
	.resource	= au1xxx_usb_otg_resources,
};

static struct resource au1200_lcd_resources[] = {
	[0] = {
		.start          = LCD_PHYS_ADDR,
		.end            = LCD_PHYS_ADDR + 0x800 - 1,
		.flags          = IORESOURCE_MEM,
	},
	[1] = {
		.start          = AU1200_LCD_INT,
		.end            = AU1200_LCD_INT,
		.flags          = IORESOURCE_IRQ,
	}
};

222
static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
P
Pete Popov 已提交
223 224 225 226 227 228

static struct platform_device au1200_lcd_device = {
	.name           = "au1200-lcd",
	.id             = 0,
	.dev = {
		.dma_mask               = &au1200_lcd_dmamask,
229
		.coherent_dma_mask      = DMA_BIT_MASK(32),
P
Pete Popov 已提交
230 231 232 233
	},
	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
	.resource       = au1200_lcd_resources,
};
P
Pete Popov 已提交
234

235
static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
236

237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262
extern struct au1xmmc_platform_data au1xmmc_platdata[2];

static struct resource au1200_mmc0_resources[] = {
	[0] = {
		.start          = SD0_PHYS_ADDR,
		.end            = SD0_PHYS_ADDR + 0x7ffff,
		.flags          = IORESOURCE_MEM,
	},
	[1] = {
		.start		= AU1200_SD_INT,
		.end		= AU1200_SD_INT,
		.flags		= IORESOURCE_IRQ,
	},
	[2] = {
		.start		= DSCR_CMD0_SDMS_TX0,
		.end		= DSCR_CMD0_SDMS_TX0,
		.flags		= IORESOURCE_DMA,
	},
	[3] = {
		.start          = DSCR_CMD0_SDMS_RX0,
		.end		= DSCR_CMD0_SDMS_RX0,
		.flags          = IORESOURCE_DMA,
	}
};

static struct platform_device au1200_mmc0_device = {
263 264 265
	.name = "au1xxx-mmc",
	.id = 0,
	.dev = {
266
		.dma_mask		= &au1xxx_mmc_dmamask,
267
		.coherent_dma_mask	= DMA_BIT_MASK(32),
268
		.platform_data		= &au1xmmc_platdata[0],
269
	},
270 271
	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
	.resource	= au1200_mmc0_resources,
272
};
273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302

#ifndef CONFIG_MIPS_DB1200
static struct resource au1200_mmc1_resources[] = {
	[0] = {
		.start          = SD1_PHYS_ADDR,
		.end            = SD1_PHYS_ADDR + 0x7ffff,
		.flags          = IORESOURCE_MEM,
	},
	[1] = {
		.start		= AU1200_SD_INT,
		.end		= AU1200_SD_INT,
		.flags		= IORESOURCE_IRQ,
	},
	[2] = {
		.start		= DSCR_CMD0_SDMS_TX1,
		.end		= DSCR_CMD0_SDMS_TX1,
		.flags		= IORESOURCE_DMA,
	},
	[3] = {
		.start          = DSCR_CMD0_SDMS_RX1,
		.end		= DSCR_CMD0_SDMS_RX1,
		.flags          = IORESOURCE_DMA,
	}
};

static struct platform_device au1200_mmc1_device = {
	.name = "au1xxx-mmc",
	.id = 1,
	.dev = {
		.dma_mask		= &au1xxx_mmc_dmamask,
303
		.coherent_dma_mask	= DMA_BIT_MASK(32),
304 305 306 307 308 309
		.platform_data		= &au1xmmc_platdata[1],
	},
	.num_resources	= ARRAY_SIZE(au1200_mmc1_resources),
	.resource	= au1200_mmc1_resources,
};
#endif /* #ifndef CONFIG_MIPS_DB1200 */
310 311
#endif /* #ifdef CONFIG_SOC_AU1200 */

312 313 314 315
/* All Alchemy demoboards with I2C have this #define in their headers */
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
	{
316 317
		.start	= CPHYSADDR(SMBUS_PSC_BASE),
		.end	= CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
318 319 320 321 322 323 324 325 326 327 328 329
		.flags	= IORESOURCE_MEM,
	},
};

static struct platform_device pbdb_smbus_device = {
	.name		= "au1xpsc_smbus",
	.id		= 0,	/* bus number */
	.num_resources	= ARRAY_SIZE(pbdb_smbus_resources),
	.resource	= pbdb_smbus_resources,
};
#endif

330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373
/* Macro to help defining the Ethernet MAC resources */
#define MAC_RES(_base, _enable, _irq)			\
	{						\
		.start	= CPHYSADDR(_base),		\
		.end	= CPHYSADDR(_base + 0xffff),	\
		.flags	= IORESOURCE_MEM,		\
	},						\
	{						\
		.start	= CPHYSADDR(_enable),		\
		.end	= CPHYSADDR(_enable + 0x3),	\
		.flags	= IORESOURCE_MEM,		\
	},						\
	{						\
		.start	= _irq,				\
		.end	= _irq,				\
		.flags	= IORESOURCE_IRQ		\
	}

static struct resource au1xxx_eth0_resources[] = {
#if defined(CONFIG_SOC_AU1000)
	MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1100)
	MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
	MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
	MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
#endif
};


static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
	.phy1_search_mac0 = 1,
};

static struct platform_device au1xxx_eth0_device = {
	.name		= "au1000-eth",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(au1xxx_eth0_resources),
	.resource	= au1xxx_eth0_resources,
	.dev.platform_data = &au1xxx_eth0_platform_data,
};

#ifndef CONFIG_SOC_AU1100
374 375 376 377 378 379 380 381 382 383
static struct resource au1xxx_eth1_resources[] = {
#if defined(CONFIG_SOC_AU1000)
	MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
	MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
	MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
#endif
};

384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
	.phy1_search_mac0 = 1,
};

static struct platform_device au1xxx_eth1_device = {
	.name		= "au1000-eth",
	.id		= 1,
	.num_resources	= ARRAY_SIZE(au1xxx_eth1_resources),
	.resource	= au1xxx_eth1_resources,
	.dev.platform_data = &au1xxx_eth1_platform_data,
};
#endif

void __init au1xxx_override_eth_cfg(unsigned int port,
			struct au1000_eth_platform_data *eth_data)
{
	if (!eth_data || port > 1)
		return;

	if (port == 0)
		memcpy(&au1xxx_eth0_platform_data, eth_data,
			sizeof(struct au1000_eth_platform_data));
#ifndef CONFIG_SOC_AU1100
	else
		memcpy(&au1xxx_eth1_platform_data, eth_data,
			sizeof(struct au1000_eth_platform_data));
#endif
}

L
Linus Torvalds 已提交
413
static struct platform_device *au1xxx_platform_devices[] __initdata = {
414
	&au1xx0_uart_device,
L
Linus Torvalds 已提交
415
	&au1xxx_usb_ohci_device,
P
Pete Popov 已提交
416 417 418
#ifdef CONFIG_FB_AU1100
	&au1100_lcd_device,
#endif
P
Pete Popov 已提交
419 420 421 422 423
#ifdef CONFIG_SOC_AU1200
	&au1xxx_usb_ehci_device,
	&au1xxx_usb_gdt_device,
	&au1xxx_usb_otg_device,
	&au1200_lcd_device,
424 425 426 427
	&au1200_mmc0_device,
#ifndef CONFIG_MIPS_DB1200
	&au1200_mmc1_device,
#endif
P
Pete Popov 已提交
428
#endif
429 430 431
#ifdef SMBUS_PSC_BASE
	&pbdb_smbus_device,
#endif
432
	&au1xxx_eth0_device,
L
Linus Torvalds 已提交
433 434
};

435
static int __init au1xxx_platform_init(void)
L
Linus Torvalds 已提交
436
{
437
	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
438
	int err, i;
439 440

	/* Fill up uartclk. */
441
	for (i = 0; au1x00_uart_data[i].flags; i++)
442 443
		au1x00_uart_data[i].uartclk = uartclk;

444 445
	err = platform_add_devices(au1xxx_platform_devices,
				   ARRAY_SIZE(au1xxx_platform_devices));
446 447
#ifndef CONFIG_SOC_AU1100
	/* Register second MAC if enabled in pinfunc */
448
	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
449 450 451
		platform_device_register(&au1xxx_eth1_device);
#endif

452
	return err;
L
Linus Torvalds 已提交
453 454 455
}

arch_initcall(au1xxx_platform_init);