lpfc_scsi.c 164.4 KB
Newer Older
1
/*******************************************************************
已提交
2
 * This file is part of the Emulex Linux Device Driver for         *
3
 * Fibre Channel Host Bus Adapters.                                *
4
 * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
5
 * EMULEX and SLI are trademarks of Emulex.                        *
已提交
6
 * www.emulex.com                                                  *
7
 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
已提交
8 9
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
10 11 12 13 14 15 16 17 18 19
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
已提交
20 21
 *******************************************************************/
#include <linux/pci.h>
22
#include <linux/slab.h>
已提交
23
#include <linux/interrupt.h>
24
#include <linux/export.h>
25
#include <linux/delay.h>
26
#include <asm/unaligned.h>
27 28
#include <linux/crc-t10dif.h>
#include <net/checksum.h>
已提交
29 30 31

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
32
#include <scsi/scsi_eh.h>
已提交
33 34 35 36 37
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>

#include "lpfc_version.h"
38
#include "lpfc_hw4.h"
已提交
39 40
#include "lpfc_hw.h"
#include "lpfc_sli.h"
41
#include "lpfc_sli4.h"
42
#include "lpfc_nl.h"
已提交
43 44
#include "lpfc_disc.h"
#include "lpfc.h"
45
#include "lpfc_scsi.h"
已提交
46 47
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
48
#include "lpfc_vport.h"
已提交
49 50 51 52

#define LPFC_RESET_WAIT  2
#define LPFC_ABORT_WAIT  2

53
int _dump_buf_done = 1;
54 55

static char *dif_op_str[] = {
56 57 58 59 60 61 62 63 64
	"PROT_NORMAL",
	"PROT_READ_INSERT",
	"PROT_WRITE_STRIP",
	"PROT_READ_STRIP",
	"PROT_WRITE_INSERT",
	"PROT_READ_PASS",
	"PROT_WRITE_PASS",
};

65 66 67 68 69 70
struct scsi_dif_tuple {
	__be16 guard_tag;       /* Checksum */
	__be16 app_tag;         /* Opaque storage */
	__be32 ref_tag;         /* Target LBA or indirect LBA */
};

71 72
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
73 74
static void
lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
75 76
static int
lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc);
77 78

static void
79
lpfc_debug_save_data(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
80 81 82 83 84
{
	void *src, *dst;
	struct scatterlist *sgde = scsi_sglist(cmnd);

	if (!_dump_buf_data) {
85 86
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
			"9050 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
87 88 89 90 91 92
				__func__);
		return;
	}


	if (!sgde) {
93 94
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
			"9051 BLKGRD: ERROR: data scatterlist is null\n");
95 96 97 98 99 100 101 102 103 104 105 106 107
		return;
	}

	dst = (void *) _dump_buf_data;
	while (sgde) {
		src = sg_virt(sgde);
		memcpy(dst, src, sgde->length);
		dst += sgde->length;
		sgde = sg_next(sgde);
	}
}

static void
108
lpfc_debug_save_dif(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
109 110 111 112 113
{
	void *src, *dst;
	struct scatterlist *sgde = scsi_prot_sglist(cmnd);

	if (!_dump_buf_dif) {
114 115
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
			"9052 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
116 117 118 119 120
				__func__);
		return;
	}

	if (!sgde) {
121 122
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
			"9053 BLKGRD: ERROR: prot scatterlist is null\n");
123 124 125 126 127 128 129 130 131 132 133 134
		return;
	}

	dst = _dump_buf_dif;
	while (sgde) {
		src = sg_virt(sgde);
		memcpy(dst, src, sgde->length);
		dst += sgde->length;
		sgde = sg_next(sgde);
	}
}

135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158
static inline unsigned
lpfc_cmd_blksize(struct scsi_cmnd *sc)
{
	return sc->device->sector_size;
}

#define LPFC_CHECK_PROTECT_GUARD	1
#define LPFC_CHECK_PROTECT_REF		2
static inline unsigned
lpfc_cmd_protect(struct scsi_cmnd *sc, int flag)
{
	return 1;
}

static inline unsigned
lpfc_cmd_guard_csum(struct scsi_cmnd *sc)
{
	if (lpfc_prot_group_type(NULL, sc) == LPFC_PG_TYPE_NO_DIF)
		return 0;
	if (scsi_host_get_guard(sc->device->host) == SHOST_DIX_GUARD_IP)
		return 1;
	return 0;
}

159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179
/**
 * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
 * @phba: Pointer to HBA object.
 * @lpfc_cmd: lpfc scsi command object pointer.
 *
 * This function is called from the lpfc_prep_task_mgmt_cmd function to
 * set the last bit in the response sge entry.
 **/
static void
lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
				struct lpfc_scsi_buf *lpfc_cmd)
{
	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
	if (sgl) {
		sgl += 1;
		sgl->word2 = le32_to_cpu(sgl->word2);
		bf_set(lpfc_sli4_sge_last, sgl, 1);
		sgl->word2 = cpu_to_le32(sgl->word2);
	}
}

180
/**
181
 * lpfc_update_stats - Update statistical data for the command completion
182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
 * @phba: Pointer to HBA object.
 * @lpfc_cmd: lpfc scsi command object pointer.
 *
 * This function is called when there is a command completion and this
 * function updates the statistical data for the command completion.
 **/
static void
lpfc_update_stats(struct lpfc_hba *phba, struct  lpfc_scsi_buf *lpfc_cmd)
{
	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
	struct lpfc_nodelist *pnode = rdata->pnode;
	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
	unsigned long flags;
	struct Scsi_Host  *shost = cmd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	unsigned long latency;
	int i;

	if (cmd->result)
		return;

203 204
	latency = jiffies_to_msecs((long)jiffies - (long)lpfc_cmd->start_time);

205 206 207
	spin_lock_irqsave(shost->host_lock, flags);
	if (!vport->stat_data_enabled ||
		vport->stat_data_blocked ||
208
		!pnode ||
209 210 211 212 213 214 215 216 217
		!pnode->lat_data ||
		(phba->bucket_type == LPFC_NO_BUCKET)) {
		spin_unlock_irqrestore(shost->host_lock, flags);
		return;
	}

	if (phba->bucket_type == LPFC_LINEAR_BUCKET) {
		i = (latency + phba->bucket_step - 1 - phba->bucket_base)/
			phba->bucket_step;
218 219 220 221 222
		/* check array subscript bounds */
		if (i < 0)
			i = 0;
		else if (i >= LPFC_MAX_BUCKET_COUNT)
			i = LPFC_MAX_BUCKET_COUNT - 1;
223 224 225 226 227 228 229 230 231 232 233 234
	} else {
		for (i = 0; i < LPFC_MAX_BUCKET_COUNT-1; i++)
			if (latency <= (phba->bucket_base +
				((1<<i)*phba->bucket_step)))
				break;
	}

	pnode->lat_data[i].cmd_count++;
	spin_unlock_irqrestore(shost->host_lock, flags);
}

/**
235
 * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287
 * @phba: Pointer to HBA context object.
 * @vport: Pointer to vport object.
 * @ndlp: Pointer to FC node associated with the target.
 * @lun: Lun number of the scsi device.
 * @old_val: Old value of the queue depth.
 * @new_val: New value of the queue depth.
 *
 * This function sends an event to the mgmt application indicating
 * there is a change in the scsi device queue depth.
 **/
static void
lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
		struct lpfc_vport  *vport,
		struct lpfc_nodelist *ndlp,
		uint32_t lun,
		uint32_t old_val,
		uint32_t new_val)
{
	struct lpfc_fast_path_event *fast_path_evt;
	unsigned long flags;

	fast_path_evt = lpfc_alloc_fast_evt(phba);
	if (!fast_path_evt)
		return;

	fast_path_evt->un.queue_depth_evt.scsi_event.event_type =
		FC_REG_SCSI_EVENT;
	fast_path_evt->un.queue_depth_evt.scsi_event.subcategory =
		LPFC_EVENT_VARQUEDEPTH;

	/* Report all luns with change in queue depth */
	fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun;
	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
		memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn,
			&ndlp->nlp_portname, sizeof(struct lpfc_name));
		memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn,
			&ndlp->nlp_nodename, sizeof(struct lpfc_name));
	}

	fast_path_evt->un.queue_depth_evt.oldval = old_val;
	fast_path_evt->un.queue_depth_evt.newval = new_val;
	fast_path_evt->vport = vport;

	fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
	spin_lock_irqsave(&phba->hbalock, flags);
	list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
	spin_unlock_irqrestore(&phba->hbalock, flags);
	lpfc_worker_wake_up(phba);

	return;
}

288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317
/**
 * lpfc_change_queue_depth - Alter scsi device queue depth
 * @sdev: Pointer the scsi device on which to change the queue depth.
 * @qdepth: New queue depth to set the sdev to.
 * @reason: The reason for the queue depth change.
 *
 * This function is called by the midlayer and the LLD to alter the queue
 * depth for a scsi device. This function sets the queue depth to the new
 * value and sends an event out to log the queue depth change.
 **/
int
lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	struct lpfc_rport_data *rdata;
	unsigned long new_queue_depth, old_queue_depth;

	old_queue_depth = sdev->queue_depth;
	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
	new_queue_depth = sdev->queue_depth;
	rdata = sdev->hostdata;
	if (rdata)
		lpfc_send_sdev_queuedepth_change_event(phba, vport,
						       rdata->pnode, sdev->lun,
						       old_queue_depth,
						       new_queue_depth);
	return sdev->queue_depth;
}

318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337
/**
 * lpfc_change_queue_type() - Change a device's scsi tag queuing type
 * @sdev: Pointer the scsi device whose queue depth is to change
 * @tag_type: Identifier for queue tag type
 */
static int
lpfc_change_queue_type(struct scsi_device *sdev, int tag_type)
{
	if (sdev->tagged_supported) {
		scsi_set_tag_type(sdev, tag_type);
		if (tag_type)
			scsi_activate_tcq(sdev, sdev->queue_depth);
		else
			scsi_deactivate_tcq(sdev, sdev->queue_depth);
	} else
		tag_type = 0;

	return tag_type;
}

338
/**
339
 * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
340 341 342 343 344 345 346 347 348
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called when there is resource error in driver or firmware.
 * This routine posts WORKER_RAMP_DOWN_QUEUE event for @phba. This routine
 * posts at most 1 event each second. This routine wakes up worker thread of
 * @phba to process WORKER_RAM_DOWN_EVENT event.
 *
 * This routine should be called with no lock held.
 **/
349
void
350
lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
351 352
{
	unsigned long flags;
353
	uint32_t evt_posted;
354 355 356 357 358 359 360 361 362 363 364 365 366 367 368

	spin_lock_irqsave(&phba->hbalock, flags);
	atomic_inc(&phba->num_rsrc_err);
	phba->last_rsrc_error_time = jiffies;

	if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
		spin_unlock_irqrestore(&phba->hbalock, flags);
		return;
	}

	phba->last_ramp_down_time = jiffies;

	spin_unlock_irqrestore(&phba->hbalock, flags);

	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
369 370
	evt_posted = phba->pport->work_port_events & WORKER_RAMP_DOWN_QUEUE;
	if (!evt_posted)
371 372 373
		phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);

374 375
	if (!evt_posted)
		lpfc_worker_wake_up(phba);
376 377 378
	return;
}

379
/**
380
 * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
381 382 383 384 385 386 387 388 389
 * @phba: The Hba for which this call is being executed.
 *
 * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
 * post at most 1 event every 5 minute after last_ramp_up_time or
 * last_rsrc_error_time.  This routine wakes up worker thread of @phba
 * to process WORKER_RAM_DOWN_EVENT event.
 *
 * This routine should be called with no lock held.
 **/
390
static inline void
391
lpfc_rampup_queue_depth(struct lpfc_vport  *vport,
392
			uint32_t queue_depth)
393 394
{
	unsigned long flags;
395
	struct lpfc_hba *phba = vport->phba;
396
	uint32_t evt_posted;
397 398
	atomic_inc(&phba->num_cmd_success);

399
	if (vport->cfg_lun_queue_depth <= queue_depth)
400 401
		return;
	spin_lock_irqsave(&phba->hbalock, flags);
402 403 404 405
	if (time_before(jiffies,
			phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) ||
	    time_before(jiffies,
			phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL)) {
406 407 408 409 410 411 412
		spin_unlock_irqrestore(&phba->hbalock, flags);
		return;
	}
	phba->last_ramp_up_time = jiffies;
	spin_unlock_irqrestore(&phba->hbalock, flags);

	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
413 414
	evt_posted = phba->pport->work_port_events & WORKER_RAMP_UP_QUEUE;
	if (!evt_posted)
415 416 417
		phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE;
	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);

418 419 420
	if (!evt_posted)
		lpfc_worker_wake_up(phba);
	return;
421 422
}

423
/**
424
 * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
425 426 427 428 429 430
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called to  process WORKER_RAMP_DOWN_QUEUE event for worker
 * thread.This routine reduces queue depth for all scsi device on each vport
 * associated with @phba.
 **/
431 432 433
void
lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
{
434 435
	struct lpfc_vport **vports;
	struct Scsi_Host  *shost;
436
	struct scsi_device *sdev;
437
	unsigned long new_queue_depth;
438
	unsigned long num_rsrc_err, num_cmd_success;
439
	int i;
440 441 442 443

	num_rsrc_err = atomic_read(&phba->num_rsrc_err);
	num_cmd_success = atomic_read(&phba->num_cmd_success);

444 445 446 447 448 449 450 451
	/*
	 * The error and success command counters are global per
	 * driver instance.  If another handler has already
	 * operated on this error event, just exit.
	 */
	if (num_rsrc_err == 0)
		return;

452 453
	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
454
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
455 456
			shost = lpfc_shost_from_vport(vports[i]);
			shost_for_each_device(sdev, shost) {
457
				new_queue_depth =
458 459 460 461 462 463 464
					sdev->queue_depth * num_rsrc_err /
					(num_rsrc_err + num_cmd_success);
				if (!new_queue_depth)
					new_queue_depth = sdev->queue_depth - 1;
				else
					new_queue_depth = sdev->queue_depth -
								new_queue_depth;
465 466
				lpfc_change_queue_depth(sdev, new_queue_depth,
							SCSI_QDEPTH_DEFAULT);
467
			}
468
		}
469
	lpfc_destroy_vport_work_array(phba, vports);
470 471 472 473
	atomic_set(&phba->num_rsrc_err, 0);
	atomic_set(&phba->num_cmd_success, 0);
}

474
/**
475
 * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
476 477 478 479 480 481 482
 * @phba: The Hba for which this call is being executed.
 *
 * This routine is called to  process WORKER_RAMP_UP_QUEUE event for worker
 * thread.This routine increases queue depth for all scsi device on each vport
 * associated with @phba by 1. This routine also sets @phba num_rsrc_err and
 * num_cmd_success to zero.
 **/
483 484 485
void
lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
{
486 487
	struct lpfc_vport **vports;
	struct Scsi_Host  *shost;
488
	struct scsi_device *sdev;
489 490 491 492
	int i;

	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
493
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
494 495
			shost = lpfc_shost_from_vport(vports[i]);
			shost_for_each_device(sdev, shost) {
496 497 498
				if (vports[i]->cfg_lun_queue_depth <=
				    sdev->queue_depth)
					continue;
499 500 501
				lpfc_change_queue_depth(sdev,
							sdev->queue_depth+1,
							SCSI_QDEPTH_RAMP_UP);
502
			}
503
		}
504
	lpfc_destroy_vport_work_array(phba, vports);
505 506 507 508
	atomic_set(&phba->num_rsrc_err, 0);
	atomic_set(&phba->num_cmd_success, 0);
}

509
/**
510
 * lpfc_scsi_dev_block - set all scsi hosts to block state
511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527
 * @phba: Pointer to HBA context object.
 *
 * This function walks vport list and set each SCSI host to block state
 * by invoking fc_remote_port_delete() routine. This function is invoked
 * with EEH when device's PCI slot has been permanently disabled.
 **/
void
lpfc_scsi_dev_block(struct lpfc_hba *phba)
{
	struct lpfc_vport **vports;
	struct Scsi_Host  *shost;
	struct scsi_device *sdev;
	struct fc_rport *rport;
	int i;

	vports = lpfc_create_vport_work_array(phba);
	if (vports != NULL)
528
		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
529 530 531 532 533 534 535 536 537
			shost = lpfc_shost_from_vport(vports[i]);
			shost_for_each_device(sdev, shost) {
				rport = starget_to_rport(scsi_target(sdev));
				fc_remote_port_delete(rport);
			}
		}
	lpfc_destroy_vport_work_array(phba, vports);
}

538
/**
539
 * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
540
 * @vport: The virtual port for which this call being executed.
541
 * @num_to_allocate: The requested number of buffers to allocate.
542
 *
543 544 545 546 547 548
 * This routine allocates a scsi buffer for device with SLI-3 interface spec,
 * the scsi buffer contains all the necessary information needed to initiate
 * a SCSI I/O. The non-DMAable buffer region contains information to build
 * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
 * and the initial BPL. In addition to allocating memory, the FCP CMND and
 * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
549 550
 *
 * Return codes:
551 552
 *   int - number of scsi buffers that were allocated.
 *   0 = failure, less than num_to_alloc is a partial failure.
553
 **/
554 555
static int
lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
已提交
556
{
J
James Smart 已提交
557
	struct lpfc_hba *phba = vport->phba;
已提交
558 559 560
	struct lpfc_scsi_buf *psb;
	struct ulp_bde64 *bpl;
	IOCB_t *iocb;
561 562 563
	dma_addr_t pdma_phys_fcp_cmd;
	dma_addr_t pdma_phys_fcp_rsp;
	dma_addr_t pdma_phys_bpl;
564
	uint16_t iotag;
565 566 567 568 569 570 571 572 573 574
	int bcnt, bpl_size;

	bpl_size = phba->cfg_sg_dma_buf_size -
		(sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));

	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
			 "9067 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
			 num_to_alloc, phba->cfg_sg_dma_buf_size,
			 (int)sizeof(struct fcp_cmnd),
			 (int)sizeof(struct fcp_rsp), bpl_size);
已提交
575

576 577 578 579
	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
		if (!psb)
			break;
已提交
580

581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609
		/*
		 * Get memory from the pci pool to map the virt space to pci
		 * bus space for an I/O.  The DMA buffer includes space for the
		 * struct fcp_cmnd, struct fcp_rsp and the number of bde's
		 * necessary to support the sg_tablesize.
		 */
		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
					GFP_KERNEL, &psb->dma_handle);
		if (!psb->data) {
			kfree(psb);
			break;
		}

		/* Initialize virtual ptrs to dma_buf region. */
		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);

		/* Allocate iotag for psb->cur_iocbq. */
		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
		if (iotag == 0) {
			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
					psb->data, psb->dma_handle);
			kfree(psb);
			break;
		}
		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;

		psb->fcp_cmnd = psb->data;
		psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
		psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
610
			sizeof(struct fcp_rsp);
已提交
611

612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652
		/* Initialize local short-hand pointers. */
		bpl = psb->fcp_bpl;
		pdma_phys_fcp_cmd = psb->dma_handle;
		pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
		pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
			sizeof(struct fcp_rsp);

		/*
		 * The first two bdes are the FCP_CMD and FCP_RSP. The balance
		 * are sg list bdes.  Initialize the first two and leave the
		 * rest for queuecommand.
		 */
		bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
		bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
		bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
		bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
		bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);

		/* Setup the physical region for the FCP RSP */
		bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
		bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
		bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
		bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
		bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);

		/*
		 * Since the IOCB for the FCP I/O is built into this
		 * lpfc_scsi_buf, initialize it with all known data now.
		 */
		iocb = &psb->cur_iocbq.iocb;
		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
		if ((phba->sli_rev == 3) &&
				!(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
			/* fill in immediate fcp command BDE */
			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
			iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
			iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
					unsli3.fcp_ext.icd);
			iocb->un.fcpi64.bdl.addrHigh = 0;
			iocb->ulpBdeCount = 0;
			iocb->ulpLe = 0;
L
Lucas De Marchi 已提交
653
			/* fill in response BDE */
654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674
			iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
							BUFF_TYPE_BDE_64;
			iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
				sizeof(struct fcp_rsp);
			iocb->unsli3.fcp_ext.rbde.addrLow =
				putPaddrLow(pdma_phys_fcp_rsp);
			iocb->unsli3.fcp_ext.rbde.addrHigh =
				putPaddrHigh(pdma_phys_fcp_rsp);
		} else {
			iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
			iocb->un.fcpi64.bdl.bdeSize =
					(2 * sizeof(struct ulp_bde64));
			iocb->un.fcpi64.bdl.addrLow =
					putPaddrLow(pdma_phys_bpl);
			iocb->un.fcpi64.bdl.addrHigh =
					putPaddrHigh(pdma_phys_bpl);
			iocb->ulpBdeCount = 1;
			iocb->ulpLe = 1;
		}
		iocb->ulpClass = CLASS3;
		psb->status = IOSTAT_SUCCESS;
675
		/* Put it back into the SCSI buffer list */
J
James Smart 已提交
676
		psb->cur_iocbq.context1  = psb;
677
		lpfc_release_scsi_buf_s3(phba, psb);
已提交
678

679
	}
已提交
680

681
	return bcnt;
已提交
682 683
}

684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709
/**
 * lpfc_sli4_vport_delete_fcp_xri_aborted -Remove all ndlp references for vport
 * @vport: pointer to lpfc vport data structure.
 *
 * This routine is invoked by the vport cleanup for deletions and the cleanup
 * for an ndlp on removal.
 **/
void
lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
{
	struct lpfc_hba *phba = vport->phba;
	struct lpfc_scsi_buf *psb, *next_psb;
	unsigned long iflag = 0;

	spin_lock_irqsave(&phba->hbalock, iflag);
	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
	list_for_each_entry_safe(psb, next_psb,
				&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
		if (psb->rdata && psb->rdata->pnode
			&& psb->rdata->pnode->vport == vport)
			psb->rdata = NULL;
	}
	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
	spin_unlock_irqrestore(&phba->hbalock, iflag);
}

710 711 712 713 714 715 716 717 718 719 720 721 722
/**
 * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
 * @phba: pointer to lpfc hba data structure.
 * @axri: pointer to the fcp xri abort wcqe structure.
 *
 * This routine is invoked by the worker thread to process a SLI4 fast-path
 * FCP aborted xri.
 **/
void
lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
			  struct sli4_wcqe_xri_aborted *axri)
{
	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
723
	uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
724 725
	struct lpfc_scsi_buf *psb, *next_psb;
	unsigned long iflag = 0;
726 727
	struct lpfc_iocbq *iocbq;
	int i;
728 729
	struct lpfc_nodelist *ndlp;
	int rrq_empty = 0;
730
	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
731

732 733
	spin_lock_irqsave(&phba->hbalock, iflag);
	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
734 735 736 737
	list_for_each_entry_safe(psb, next_psb,
		&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
		if (psb->cur_iocbq.sli4_xritag == xri) {
			list_del(&psb->list);
738
			psb->exch_busy = 0;
739
			psb->status = IOSTAT_SUCCESS;
740 741
			spin_unlock(
				&phba->sli4_hba.abts_scsi_buf_list_lock);
742 743 744 745 746
			if (psb->rdata && psb->rdata->pnode)
				ndlp = psb->rdata->pnode;
			else
				ndlp = NULL;

747
			rrq_empty = list_empty(&phba->active_rrq_list);
748
			spin_unlock_irqrestore(&phba->hbalock, iflag);
749
			if (ndlp) {
750 751
				lpfc_set_rrq_active(phba, ndlp,
					psb->cur_iocbq.sli4_lxritag, rxid, 1);
752 753
				lpfc_sli4_abts_err_handler(phba, ndlp, axri);
			}
754
			lpfc_release_scsi_buf_s4(phba, psb);
755 756
			if (rrq_empty)
				lpfc_worker_wake_up(phba);
757 758 759
			return;
		}
	}
760 761 762 763 764 765 766 767 768 769 770 771
	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
	for (i = 1; i <= phba->sli.last_iotag; i++) {
		iocbq = phba->sli.iocbq_lookup[i];

		if (!(iocbq->iocb_flag &  LPFC_IO_FCP) ||
			(iocbq->iocb_flag & LPFC_IO_LIBDFC))
			continue;
		if (iocbq->sli4_xritag != xri)
			continue;
		psb = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
		psb->exch_busy = 0;
		spin_unlock_irqrestore(&phba->hbalock, iflag);
772
		if (!list_empty(&pring->txq))
773
			lpfc_worker_wake_up(phba);
774 775 776 777
		return;

	}
	spin_unlock_irqrestore(&phba->hbalock, iflag);
778 779 780
}

/**
781
 * lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list
782
 * @phba: pointer to lpfc hba data structure.
783
 * @post_sblist: pointer to the scsi buffer list.
784
 *
785 786 787 788 789 790
 * This routine walks a list of scsi buffers that was passed in. It attempts
 * to construct blocks of scsi buffer sgls which contains contiguous xris and
 * uses the non-embedded SGL block post mailbox commands to post to the port.
 * For single SCSI buffer sgl with non-contiguous xri, if any, it shall use
 * embedded SGL post mailbox command for posting. The @post_sblist passed in
 * must be local list, thus no lock is needed when manipulate the list.
791
 *
792
 * Returns: 0 = failure, non-zero number of successfully posted buffers.
793 794
 **/
int
795 796
lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba,
			     struct list_head *post_sblist, int sb_count)
797
{
798
	struct lpfc_scsi_buf *psb, *psb_next;
799
	int status, sgl_size;
800 801 802 803 804 805 806 807 808 809 810
	int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
	dma_addr_t pdma_phys_bpl1;
	int last_xritag = NO_XRI;
	LIST_HEAD(prep_sblist);
	LIST_HEAD(blck_sblist);
	LIST_HEAD(scsi_sblist);

	/* sanity check */
	if (sb_count <= 0)
		return -EINVAL;

811 812 813
	sgl_size = phba->cfg_sg_dma_buf_size -
		(sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));

814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832
	list_for_each_entry_safe(psb, psb_next, post_sblist, list) {
		list_del_init(&psb->list);
		block_cnt++;
		if ((last_xritag != NO_XRI) &&
		    (psb->cur_iocbq.sli4_xritag != last_xritag + 1)) {
			/* a hole in xri block, form a sgl posting block */
			list_splice_init(&prep_sblist, &blck_sblist);
			post_cnt = block_cnt - 1;
			/* prepare list for next posting block */
			list_add_tail(&psb->list, &prep_sblist);
			block_cnt = 1;
		} else {
			/* prepare list for next posting block */
			list_add_tail(&psb->list, &prep_sblist);
			/* enough sgls for non-embed sgl mbox command */
			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
				list_splice_init(&prep_sblist, &blck_sblist);
				post_cnt = block_cnt;
				block_cnt = 0;
833
			}
834 835 836
		}
		num_posting++;
		last_xritag = psb->cur_iocbq.sli4_xritag;
837

838 839 840 841 842 843 844 845
		/* end of repost sgl list condition for SCSI buffers */
		if (num_posting == sb_count) {
			if (post_cnt == 0) {
				/* last sgl posting block */
				list_splice_init(&prep_sblist, &blck_sblist);
				post_cnt = block_cnt;
			} else if (block_cnt == 1) {
				/* last single sgl with non-contiguous xri */
846
				if (sgl_size > SGL_PAGE_SIZE)
847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867
					pdma_phys_bpl1 = psb->dma_phys_bpl +
								SGL_PAGE_SIZE;
				else
					pdma_phys_bpl1 = 0;
				status = lpfc_sli4_post_sgl(phba,
						psb->dma_phys_bpl,
						pdma_phys_bpl1,
						psb->cur_iocbq.sli4_xritag);
				if (status) {
					/* failure, put on abort scsi list */
					psb->exch_busy = 1;
				} else {
					/* success, put on SCSI buffer list */
					psb->exch_busy = 0;
					psb->status = IOSTAT_SUCCESS;
					num_posted++;
				}
				/* success, put on SCSI buffer sgl list */
				list_add_tail(&psb->list, &scsi_sblist);
			}
		}
868

869 870
		/* continue until a nembed page worth of sgls */
		if (post_cnt == 0)
871
			continue;
872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887

		/* post block of SCSI buffer list sgls */
		status = lpfc_sli4_post_scsi_sgl_block(phba, &blck_sblist,
						       post_cnt);

		/* don't reset xirtag due to hole in xri block */
		if (block_cnt == 0)
			last_xritag = NO_XRI;

		/* reset SCSI buffer post count for next round of posting */
		post_cnt = 0;

		/* put posted SCSI buffer-sgl posted on SCSI buffer sgl list */
		while (!list_empty(&blck_sblist)) {
			list_remove_head(&blck_sblist, psb,
					 struct lpfc_scsi_buf, list);
888
			if (status) {
889
				/* failure, put on abort scsi list */
890 891
				psb->exch_busy = 1;
			} else {
892
				/* success, put on SCSI buffer list */
893
				psb->exch_busy = 0;
894
				psb->status = IOSTAT_SUCCESS;
895
				num_posted++;
896
			}
897
			list_add_tail(&psb->list, &scsi_sblist);
898 899
		}
	}
900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927
	/* Push SCSI buffers with sgl posted to the availble list */
	while (!list_empty(&scsi_sblist)) {
		list_remove_head(&scsi_sblist, psb,
				 struct lpfc_scsi_buf, list);
		lpfc_release_scsi_buf_s4(phba, psb);
	}
	return num_posted;
}

/**
 * lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine walks the list of scsi buffers that have been allocated and
 * repost them to the port by using SGL block post. This is needed after a
 * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
 * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
 * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
 *
 * Returns: 0 = success, non-zero failure.
 **/
int
lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
{
	LIST_HEAD(post_sblist);
	int num_posted, rc = 0;

	/* get all SCSI buffers need to repost to a local list */
928 929 930 931 932 933
	spin_lock_irq(&phba->scsi_buf_list_get_lock);
	spin_lock_irq(&phba->scsi_buf_list_put_lock);
	list_splice_init(&phba->lpfc_scsi_buf_list_get, &post_sblist);
	list_splice(&phba->lpfc_scsi_buf_list_put, &post_sblist);
	spin_unlock_irq(&phba->scsi_buf_list_put_lock);
	spin_unlock_irq(&phba->scsi_buf_list_get_lock);
934 935 936 937 938 939 940 941 942

	/* post the list of scsi buffer sgls to port if available */
	if (!list_empty(&post_sblist)) {
		num_posted = lpfc_sli4_post_scsi_sgl_list(phba, &post_sblist,
						phba->sli4_hba.scsi_xri_cnt);
		/* failed to post any scsi buffer, return error */
		if (num_posted == 0)
			rc = -EIO;
	}
943 944 945 946 947 948 949 950
	return rc;
}

/**
 * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
 * @vport: The virtual port for which this call being executed.
 * @num_to_allocate: The requested number of buffers to allocate.
 *
951
 * This routine allocates scsi buffers for device with SLI-4 interface spec,
952
 * the scsi buffer contains all the necessary information needed to initiate
953 954
 * a SCSI I/O. After allocating up to @num_to_allocate SCSI buffers and put
 * them on a list, it post them to the port by using SGL block post.
955 956
 *
 * Return codes:
957
 *   int - number of scsi buffers that were allocated and posted.
958 959 960 961 962 963 964 965 966 967 968
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
static int
lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
{
	struct lpfc_hba *phba = vport->phba;
	struct lpfc_scsi_buf *psb;
	struct sli4_sge *sgl;
	IOCB_t *iocb;
	dma_addr_t pdma_phys_fcp_cmd;
	dma_addr_t pdma_phys_fcp_rsp;
969
	dma_addr_t pdma_phys_bpl;
970
	uint16_t iotag, lxri = 0;
971
	int bcnt, num_posted, sgl_size;
972 973 974
	LIST_HEAD(prep_sblist);
	LIST_HEAD(post_sblist);
	LIST_HEAD(scsi_sblist);
975

976 977 978 979 980 981 982 983 984
	sgl_size = phba->cfg_sg_dma_buf_size -
		(sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));

	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
			 "9068 ALLOC %d scsi_bufs: %d (%d + %d + %d)\n",
			 num_to_alloc, phba->cfg_sg_dma_buf_size, sgl_size,
			 (int)sizeof(struct fcp_cmnd),
			 (int)sizeof(struct fcp_rsp));

985 986 987 988 989
	for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
		psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
		if (!psb)
			break;
		/*
990 991 992 993
		 * Get memory from the pci pool to map the virt space to
		 * pci bus space for an I/O. The DMA buffer includes space
		 * for the struct fcp_cmnd, struct fcp_rsp and the number
		 * of bde's necessary to support the sg_tablesize.
994 995 996 997 998 999 1000 1001 1002
		 */
		psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
						GFP_KERNEL, &psb->dma_handle);
		if (!psb->data) {
			kfree(psb);
			break;
		}
		memset(psb->data, 0, phba->cfg_sg_dma_buf_size);

1003 1004 1005 1006 1007 1008 1009 1010 1011
		/* Page alignment is CRITICAL, double check to be sure */
		if (((unsigned long)(psb->data) &
		    (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0) {
			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
				      psb->data, psb->dma_handle);
			kfree(psb);
			break;
		}

1012 1013 1014
		/* Allocate iotag for psb->cur_iocbq. */
		iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
		if (iotag == 0) {
1015 1016
			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
				psb->data, psb->dma_handle);
1017 1018 1019 1020
			kfree(psb);
			break;
		}

1021 1022
		lxri = lpfc_sli4_next_xritag(phba);
		if (lxri == NO_XRI) {
1023 1024 1025 1026 1027
			pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
			      psb->data, psb->dma_handle);
			kfree(psb);
			break;
		}
1028 1029
		psb->cur_iocbq.sli4_lxritag = lxri;
		psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
1030 1031
		psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
		psb->fcp_bpl = psb->data;
1032
		psb->fcp_cmnd = (psb->data + sgl_size);
1033 1034 1035 1036 1037 1038
		psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
					sizeof(struct fcp_cmnd));

		/* Initialize local short-hand pointers. */
		sgl = (struct sli4_sge *)psb->fcp_bpl;
		pdma_phys_bpl = psb->dma_handle;
1039
		pdma_phys_fcp_cmd = (psb->dma_handle + sgl_size);
1040 1041 1042
		pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);

		/*
1043 1044 1045
		 * The first two bdes are the FCP_CMD and FCP_RSP.
		 * The balance are sg list bdes. Initialize the
		 * first two and leave the rest for queuecommand.
1046 1047 1048
		 */
		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
1049
		sgl->word2 = le32_to_cpu(sgl->word2);
1050 1051
		bf_set(lpfc_sli4_sge_last, sgl, 0);
		sgl->word2 = cpu_to_le32(sgl->word2);
1052
		sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd));
1053 1054 1055 1056 1057
		sgl++;

		/* Setup the physical region for the FCP RSP */
		sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
		sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
1058
		sgl->word2 = le32_to_cpu(sgl->word2);
1059 1060
		bf_set(lpfc_sli4_sge_last, sgl, 1);
		sgl->word2 = cpu_to_le32(sgl->word2);
1061
		sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp));
1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079

		/*
		 * Since the IOCB for the FCP I/O is built into this
		 * lpfc_scsi_buf, initialize it with all known data now.
		 */
		iocb = &psb->cur_iocbq.iocb;
		iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
		iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
		/* setting the BLP size to 2 * sizeof BDE may not be correct.
		 * We are setting the bpl to point to out sgl. An sgl's
		 * entries are 16 bytes, a bpl entries are 12 bytes.
		 */
		iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
		iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
		iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
		iocb->ulpBdeCount = 1;
		iocb->ulpLe = 1;
		iocb->ulpClass = CLASS3;
1080
		psb->cur_iocbq.context1 = psb;
1081 1082
		psb->dma_phys_bpl = pdma_phys_bpl;

1083 1084
		/* add the scsi buffer to a post list */
		list_add_tail(&psb->list, &post_sblist);
1085
		spin_lock_irq(&phba->scsi_buf_list_get_lock);
1086
		phba->sli4_hba.scsi_xri_cnt++;
1087
		spin_unlock_irq(&phba->scsi_buf_list_get_lock);
1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100
	}
	lpfc_printf_log(phba, KERN_INFO, LOG_BG,
			"3021 Allocate %d out of %d requested new SCSI "
			"buffers\n", bcnt, num_to_alloc);

	/* post the list of scsi buffer sgls to port if available */
	if (!list_empty(&post_sblist))
		num_posted = lpfc_sli4_post_scsi_sgl_list(phba,
							  &post_sblist, bcnt);
	else
		num_posted = 0;

	return num_posted;
1101 1102
}

1103
/**
1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121
 * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
 * @vport: The virtual port for which this call being executed.
 * @num_to_allocate: The requested number of buffers to allocate.
 *
 * This routine wraps the actual SCSI buffer allocator function pointer from
 * the lpfc_hba struct.
 *
 * Return codes:
 *   int - number of scsi buffers that were allocated.
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
static inline int
lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
{
	return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
}

/**
1122
 * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
1123
 * @phba: The HBA for which this call is being executed.
1124 1125 1126 1127 1128 1129 1130 1131
 *
 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
 * and returns to caller.
 *
 * Return codes:
 *   NULL - Error
 *   Pointer to lpfc_scsi_buf - Success
 **/
1132
static struct lpfc_scsi_buf*
1133
lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
已提交
1134
{
1135
	struct  lpfc_scsi_buf * lpfc_cmd = NULL;
1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150
	struct list_head *scsi_buf_list_get = &phba->lpfc_scsi_buf_list_get;
	unsigned long gflag = 0;
	unsigned long pflag = 0;

	spin_lock_irqsave(&phba->scsi_buf_list_get_lock, gflag);
	list_remove_head(scsi_buf_list_get, lpfc_cmd, struct lpfc_scsi_buf,
			 list);
	if (!lpfc_cmd) {
		spin_lock_irqsave(&phba->scsi_buf_list_put_lock, pflag);
		list_splice(&phba->lpfc_scsi_buf_list_put,
			    &phba->lpfc_scsi_buf_list_get);
		INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
		list_remove_head(scsi_buf_list_get, lpfc_cmd,
				 struct lpfc_scsi_buf, list);
		spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, pflag);
1151
	}
1152
	spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, gflag);
1153 1154
	return  lpfc_cmd;
}
1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
/**
 * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
 * @phba: The HBA for which this call is being executed.
 *
 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
 * and returns to caller.
 *
 * Return codes:
 *   NULL - Error
 *   Pointer to lpfc_scsi_buf - Success
 **/
static struct lpfc_scsi_buf*
lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
{
1169
	struct lpfc_scsi_buf *lpfc_cmd, *lpfc_cmd_next;
1170 1171
	unsigned long gflag = 0;
	unsigned long pflag = 0;
1172 1173
	int found = 0;

1174
	spin_lock_irqsave(&phba->scsi_buf_list_get_lock, gflag);
1175 1176
	list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
				 &phba->lpfc_scsi_buf_list_get, list) {
1177
		if (lpfc_test_rrq_active(phba, ndlp,
1178
					 lpfc_cmd->cur_iocbq.sli4_lxritag))
1179 1180
			continue;
		list_del(&lpfc_cmd->list);
1181
		found = 1;
1182
		break;
1183
	}
1184 1185 1186 1187 1188 1189
	if (!found) {
		spin_lock_irqsave(&phba->scsi_buf_list_put_lock, pflag);
		list_splice(&phba->lpfc_scsi_buf_list_put,
			    &phba->lpfc_scsi_buf_list_get);
		INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);
		spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, pflag);
1190 1191
		list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
					 &phba->lpfc_scsi_buf_list_get, list) {
1192 1193 1194 1195 1196 1197 1198 1199 1200
			if (lpfc_test_rrq_active(
				phba, ndlp, lpfc_cmd->cur_iocbq.sli4_lxritag))
				continue;
			list_del(&lpfc_cmd->list);
			found = 1;
			break;
		}
	}
	spin_unlock_irqrestore(&phba->scsi_buf_list_get_lock, gflag);
1201 1202
	if (!found)
		return NULL;
1203
	return  lpfc_cmd;
1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220
}
/**
 * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
 * @phba: The HBA for which this call is being executed.
 *
 * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
 * and returns to caller.
 *
 * Return codes:
 *   NULL - Error
 *   Pointer to lpfc_scsi_buf - Success
 **/
static struct lpfc_scsi_buf*
lpfc_get_scsi_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
{
	return  phba->lpfc_get_scsi_buf(phba, ndlp);
}
已提交
1221

1222
/**
1223
 * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
1224 1225 1226 1227 1228 1229
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list.
 **/
1230
static void
1231
lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
1232
{
1233
	unsigned long iflag = 0;
已提交
1234

1235 1236 1237 1238 1239
	psb->seg_cnt = 0;
	psb->nonsg_phys = 0;
	psb->prot_seg_cnt = 0;

	spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
1240
	psb->pCmd = NULL;
1241
	psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1242 1243
	list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
	spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
已提交
1244 1245
}

1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260
/**
 * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
 * and cannot be reused for at least RA_TOV amount of time if it was
 * aborted.
 **/
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
	unsigned long iflag = 0;

1261 1262 1263 1264
	psb->seg_cnt = 0;
	psb->nonsg_phys = 0;
	psb->prot_seg_cnt = 0;

1265
	if (psb->exch_busy) {
1266 1267 1268 1269 1270 1271 1272 1273 1274
		spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
					iflag);
		psb->pCmd = NULL;
		list_add_tail(&psb->list,
			&phba->sli4_hba.lpfc_abts_scsi_buf_list);
		spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
					iflag);
	} else {
		psb->pCmd = NULL;
1275
		psb->cur_iocbq.iocb_flag = LPFC_IO_FCP;
1276 1277 1278
		spin_lock_irqsave(&phba->scsi_buf_list_put_lock, iflag);
		list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list_put);
		spin_unlock_irqrestore(&phba->scsi_buf_list_put_lock, iflag);
1279 1280 1281
	}
}

1282
/**
1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298
 * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
 * @phba: The Hba for which this call is being executed.
 * @psb: The scsi buffer which is being released.
 *
 * This routine releases @psb scsi buffer by adding it to tail of @phba
 * lpfc_scsi_buf_list list.
 **/
static void
lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{

	phba->lpfc_release_scsi_buf(phba, psb);
}

/**
 * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
1299 1300 1301 1302
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
1303 1304 1305
 * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
 * through sg elements and format the bdea. This routine also initializes all
 * IOCB fields which are dependent on scsi command request buffer.
1306 1307 1308 1309 1310
 *
 * Return codes:
 *   1 - Error
 *   0 - Success
 **/
已提交
1311
static int
1312
lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
已提交
1313 1314 1315 1316 1317
{
	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
	struct scatterlist *sgel = NULL;
	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
	struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
1318
	struct lpfc_iocbq *iocbq = &lpfc_cmd->cur_iocbq;
已提交
1319
	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
1320
	struct ulp_bde64 *data_bde = iocb_cmd->unsli3.fcp_ext.dbde;
已提交
1321
	dma_addr_t physaddr;
1322
	uint32_t num_bde = 0;
1323
	int nseg, datadir = scsi_cmnd->sc_data_direction;
已提交
1324 1325 1326 1327 1328 1329 1330 1331

	/*
	 * There are three possibilities here - use scatter-gather segment, use
	 * the single mapping, or neither.  Start the lpfc command prep by
	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
	 * data bde entry.
	 */
	bpl += 2;
1332
	if (scsi_sg_count(scsi_cmnd)) {
已提交
1333 1334 1335 1336 1337 1338 1339
		/*
		 * The driver stores the segment count returned from pci_map_sg
		 * because this a count of dma-mappings used to map the use_sg
		 * pages.  They are not guaranteed to be the same for those
		 * architectures that implement an IOMMU.
		 */

1340 1341 1342 1343 1344
		nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
				  scsi_sg_count(scsi_cmnd), datadir);
		if (unlikely(!nseg))
			return 1;

1345
		lpfc_cmd->seg_cnt = nseg;
已提交
1346
		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
1347 1348
			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
				"9064 BLKGRD: %s: Too many sg segments from "
1349
			       "dma_map_sg.  Config %d, seg_cnt %d\n",
1350
			       __func__, phba->cfg_sg_seg_cnt,
已提交
1351
			       lpfc_cmd->seg_cnt);
1352
			lpfc_cmd->seg_cnt = 0;
1353
			scsi_dma_unmap(scsi_cmnd);
已提交
1354 1355 1356 1357 1358 1359 1360 1361
			return 1;
		}

		/*
		 * The driver established a maximum scatter-gather segment count
		 * during probe that limits the number of sg elements in any
		 * single scsi command.  Just run through the seg_cnt and format
		 * the bde's.
1362 1363 1364
		 * When using SLI-3 the driver will try to fit all the BDEs into
		 * the IOCB. If it can't then the BDEs get added to a BPL as it
		 * does for SLI-2 mode.
已提交
1365
		 */
1366
		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
已提交
1367
			physaddr = sg_dma_address(sgel);
1368
			if (phba->sli_rev == 3 &&
1369
			    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
1370
			    !(iocbq->iocb_flag & DSS_SECURITY_OP) &&
1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386
			    nseg <= LPFC_EXT_DATA_BDE_COUNT) {
				data_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
				data_bde->tus.f.bdeSize = sg_dma_len(sgel);
				data_bde->addrLow = putPaddrLow(physaddr);
				data_bde->addrHigh = putPaddrHigh(physaddr);
				data_bde++;
			} else {
				bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
				bpl->tus.f.bdeSize = sg_dma_len(sgel);
				bpl->tus.w = le32_to_cpu(bpl->tus.w);
				bpl->addrLow =
					le32_to_cpu(putPaddrLow(physaddr));
				bpl->addrHigh =
					le32_to_cpu(putPaddrHigh(physaddr));
				bpl++;
			}
已提交
1387
		}
1388
	}
已提交
1389 1390 1391

	/*
	 * Finish initializing those IOCB fields that are dependent on the
1392 1393 1394
	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
	 * explicitly reinitialized and for SLI-3 the extended bde count is
	 * explicitly reinitialized since all iocb memory resources are reused.
已提交
1395
	 */
1396
	if (phba->sli_rev == 3 &&
1397 1398
	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
	    !(iocbq->iocb_flag & DSS_SECURITY_OP)) {
1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413
		if (num_bde > LPFC_EXT_DATA_BDE_COUNT) {
			/*
			 * The extended IOCB format can only fit 3 BDE or a BPL.
			 * This I/O has more than 3 BDE so the 1st data bde will
			 * be a BPL that is filled in here.
			 */
			physaddr = lpfc_cmd->dma_handle;
			data_bde->tus.f.bdeFlags = BUFF_TYPE_BLP_64;
			data_bde->tus.f.bdeSize = (num_bde *
						   sizeof(struct ulp_bde64));
			physaddr += (sizeof(struct fcp_cmnd) +
				     sizeof(struct fcp_rsp) +
				     (2 * sizeof(struct ulp_bde64)));
			data_bde->addrHigh = putPaddrHigh(physaddr);
			data_bde->addrLow = putPaddrLow(physaddr);
L
Lucas De Marchi 已提交
1414
			/* ebde count includes the response bde and data bpl */
1415 1416
			iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
		} else {
L
Lucas De Marchi 已提交
1417
			/* ebde count includes the response bde and data bdes */
1418 1419 1420 1421 1422
			iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
		}
	} else {
		iocb_cmd->un.fcpi64.bdl.bdeSize =
			((num_bde + 2) * sizeof(struct ulp_bde64));
1423
		iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
1424
	}
1425
	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
1426 1427 1428 1429 1430

	/*
	 * Due to difference in data length between DIF/non-DIF paths,
	 * we need to set word 4 of IOCB here
	 */
1431
	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
1432 1433 1434
	return 0;
}

1435
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1436

1437 1438 1439 1440 1441 1442 1443 1444
/* Return if if error injection is detected by Initiator */
#define BG_ERR_INIT	0x1
/* Return if if error injection is detected by Target */
#define BG_ERR_TGT	0x2
/* Return if if swapping CSUM<-->CRC is required for error injection */
#define BG_ERR_SWAP	0x10
/* Return if disabling Guard/Ref/App checking is required for error injection */
#define BG_ERR_CHECK	0x20
1445 1446 1447 1448

/**
 * lpfc_bg_err_inject - Determine if we should inject an error
 * @phba: The Hba for which this call is being executed.
1449 1450 1451 1452 1453
 * @sc: The SCSI command to examine
 * @reftag: (out) BlockGuard reference tag for transmitted data
 * @apptag: (out) BlockGuard application tag for transmitted data
 * @new_guard (in) Value to replace CRC with if needed
 *
1454
 * Returns BG_ERR_* bit mask or 0 if request ignored
1455
 **/
1456 1457 1458 1459 1460 1461
static int
lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
{
	struct scatterlist *sgpe; /* s/g prot entry */
	struct scatterlist *sgde; /* s/g data entry */
1462
	struct lpfc_scsi_buf *lpfc_cmd = NULL;
1463
	struct scsi_dif_tuple *src = NULL;
1464 1465
	struct lpfc_nodelist *ndlp;
	struct lpfc_rport_data *rdata;
1466 1467 1468 1469 1470
	uint32_t op = scsi_get_prot_op(sc);
	uint32_t blksize;
	uint32_t numblks;
	sector_t lba;
	int rc = 0;
1471
	int blockoff = 0;
1472 1473 1474 1475

	if (op == SCSI_PROT_NORMAL)
		return 0;

1476 1477
	sgpe = scsi_prot_sglist(sc);
	sgde = scsi_sglist(sc);
1478
	lba = scsi_get_lba(sc);
1479 1480

	/* First check if we need to match the LBA */
1481 1482 1483 1484 1485 1486 1487 1488
	if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
		blksize = lpfc_cmd_blksize(sc);
		numblks = (scsi_bufflen(sc) + blksize - 1) / blksize;

		/* Make sure we have the right LBA if one is specified */
		if ((phba->lpfc_injerr_lba < lba) ||
			(phba->lpfc_injerr_lba >= (lba + numblks)))
			return 0;
1489 1490 1491 1492 1493 1494 1495
		if (sgpe) {
			blockoff = phba->lpfc_injerr_lba - lba;
			numblks = sg_dma_len(sgpe) /
				sizeof(struct scsi_dif_tuple);
			if (numblks < blockoff)
				blockoff = numblks;
		}
1496 1497
	}

1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524
	/* Next check if we need to match the remote NPortID or WWPN */
	rdata = sc->device->hostdata;
	if (rdata && rdata->pnode) {
		ndlp = rdata->pnode;

		/* Make sure we have the right NPortID if one is specified */
		if (phba->lpfc_injerr_nportid  &&
			(phba->lpfc_injerr_nportid != ndlp->nlp_DID))
			return 0;

		/*
		 * Make sure we have the right WWPN if one is specified.
		 * wwn[0] should be a non-zero NAA in a good WWPN.
		 */
		if (phba->lpfc_injerr_wwpn.u.wwn[0]  &&
			(memcmp(&ndlp->nlp_portname, &phba->lpfc_injerr_wwpn,
				sizeof(struct lpfc_name)) != 0))
			return 0;
	}

	/* Setup a ptr to the protection data if the SCSI host provides it */
	if (sgpe) {
		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
		src += blockoff;
		lpfc_cmd = (struct lpfc_scsi_buf *)sc->host_scribble;
	}

1525 1526
	/* Should we change the Reference Tag */
	if (reftag) {
1527 1528 1529
		if (phba->lpfc_injerr_wref_cnt) {
			switch (op) {
			case SCSI_PROT_WRITE_PASS:
1530 1531 1532 1533 1534 1535 1536 1537
				if (src) {
					/*
					 * For WRITE_PASS, force the error
					 * to be sent on the wire. It should
					 * be detected by the Target.
					 * If blockoff != 0 error will be
					 * inserted in middle of the IO.
					 */
1538 1539 1540 1541 1542

					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
					"9076 BLKGRD: Injecting reftag error: "
					"write lba x%lx + x%x oldrefTag x%x\n",
					(unsigned long)lba, blockoff,
1543
					be32_to_cpu(src->ref_tag));
1544

1545
					/*
1546 1547
					 * Save the old ref_tag so we can
					 * restore it on completion.
1548
					 */
1549 1550 1551 1552 1553 1554 1555 1556 1557
					if (lpfc_cmd) {
						lpfc_cmd->prot_data_type =
							LPFC_INJERR_REFTAG;
						lpfc_cmd->prot_data_segment =
							src;
						lpfc_cmd->prot_data =
							src->ref_tag;
					}
					src->ref_tag = cpu_to_be32(0xDEADBEEF);
1558
					phba->lpfc_injerr_wref_cnt--;
1559 1560 1561 1562 1563 1564 1565
					if (phba->lpfc_injerr_wref_cnt == 0) {
						phba->lpfc_injerr_nportid = 0;
						phba->lpfc_injerr_lba =
							LPFC_INJERR_LBA_OFF;
						memset(&phba->lpfc_injerr_wwpn,
						  0, sizeof(struct lpfc_name));
					}
1566 1567
					rc = BG_ERR_TGT | BG_ERR_CHECK;

1568 1569 1570
					break;
				}
				/* Drop thru */
1571
			case SCSI_PROT_WRITE_INSERT:
1572
				/*
1573 1574 1575
				 * For WRITE_INSERT, force the error
				 * to be sent on the wire. It should be
				 * detected by the Target.
1576
				 */
1577
				/* DEADBEEF will be the reftag on the wire */
1578 1579
				*reftag = 0xDEADBEEF;
				phba->lpfc_injerr_wref_cnt--;
1580 1581 1582 1583 1584 1585 1586
				if (phba->lpfc_injerr_wref_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
					LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1587
				rc = BG_ERR_TGT | BG_ERR_CHECK;
1588 1589

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1590
					"9078 BLKGRD: Injecting reftag error: "
1591 1592
					"write lba x%lx\n", (unsigned long)lba);
				break;
1593
			case SCSI_PROT_WRITE_STRIP:
1594
				/*
1595 1596 1597
				 * For WRITE_STRIP and WRITE_PASS,
				 * force the error on data
				 * being copied from SLI-Host to SLI-Port.
1598
				 */
1599 1600
				*reftag = 0xDEADBEEF;
				phba->lpfc_injerr_wref_cnt--;
1601 1602 1603 1604 1605 1606 1607
				if (phba->lpfc_injerr_wref_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1608
				rc = BG_ERR_INIT;
1609 1610

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1611
					"9077 BLKGRD: Injecting reftag error: "
1612
					"write lba x%lx\n", (unsigned long)lba);
1613
				break;
1614
			}
1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625
		}
		if (phba->lpfc_injerr_rref_cnt) {
			switch (op) {
			case SCSI_PROT_READ_INSERT:
			case SCSI_PROT_READ_STRIP:
			case SCSI_PROT_READ_PASS:
				/*
				 * For READ_STRIP and READ_PASS, force the
				 * error on data being read off the wire. It
				 * should force an IO error to the driver.
				 */
1626 1627
				*reftag = 0xDEADBEEF;
				phba->lpfc_injerr_rref_cnt--;
1628 1629 1630 1631 1632 1633 1634
				if (phba->lpfc_injerr_rref_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1635
				rc = BG_ERR_INIT;
1636 1637

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1638
					"9079 BLKGRD: Injecting reftag error: "
1639
					"read lba x%lx\n", (unsigned long)lba);
1640
				break;
1641 1642 1643 1644 1645 1646
			}
		}
	}

	/* Should we change the Application Tag */
	if (apptag) {
1647 1648 1649
		if (phba->lpfc_injerr_wapp_cnt) {
			switch (op) {
			case SCSI_PROT_WRITE_PASS:
1650
				if (src) {
1651 1652 1653 1654 1655 1656 1657 1658
					/*
					 * For WRITE_PASS, force the error
					 * to be sent on the wire. It should
					 * be detected by the Target.
					 * If blockoff != 0 error will be
					 * inserted in middle of the IO.
					 */

1659 1660 1661 1662
					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
					"9080 BLKGRD: Injecting apptag error: "
					"write lba x%lx + x%x oldappTag x%x\n",
					(unsigned long)lba, blockoff,
1663
					be16_to_cpu(src->app_tag));
1664 1665

					/*
1666 1667
					 * Save the old app_tag so we can
					 * restore it on completion.
1668
					 */
1669 1670 1671 1672 1673 1674 1675 1676 1677
					if (lpfc_cmd) {
						lpfc_cmd->prot_data_type =
							LPFC_INJERR_APPTAG;
						lpfc_cmd->prot_data_segment =
							src;
						lpfc_cmd->prot_data =
							src->app_tag;
					}
					src->app_tag = cpu_to_be16(0xDEAD);
1678
					phba->lpfc_injerr_wapp_cnt--;
1679 1680 1681 1682 1683 1684 1685
					if (phba->lpfc_injerr_wapp_cnt == 0) {
						phba->lpfc_injerr_nportid = 0;
						phba->lpfc_injerr_lba =
							LPFC_INJERR_LBA_OFF;
						memset(&phba->lpfc_injerr_wwpn,
						  0, sizeof(struct lpfc_name));
					}
1686
					rc = BG_ERR_TGT | BG_ERR_CHECK;
1687 1688 1689
					break;
				}
				/* Drop thru */
1690
			case SCSI_PROT_WRITE_INSERT:
1691
				/*
1692 1693 1694
				 * For WRITE_INSERT, force the
				 * error to be sent on the wire. It should be
				 * detected by the Target.
1695
				 */
1696
				/* DEAD will be the apptag on the wire */
1697 1698
				*apptag = 0xDEAD;
				phba->lpfc_injerr_wapp_cnt--;
1699 1700 1701 1702 1703 1704 1705
				if (phba->lpfc_injerr_wapp_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1706
				rc = BG_ERR_TGT | BG_ERR_CHECK;
1707

1708
				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1709
					"0813 BLKGRD: Injecting apptag error: "
1710 1711
					"write lba x%lx\n", (unsigned long)lba);
				break;
1712
			case SCSI_PROT_WRITE_STRIP:
1713
				/*
1714 1715 1716
				 * For WRITE_STRIP and WRITE_PASS,
				 * force the error on data
				 * being copied from SLI-Host to SLI-Port.
1717
				 */
1718 1719
				*apptag = 0xDEAD;
				phba->lpfc_injerr_wapp_cnt--;
1720 1721 1722 1723 1724 1725 1726
				if (phba->lpfc_injerr_wapp_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1727
				rc = BG_ERR_INIT;
1728 1729

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1730
					"0812 BLKGRD: Injecting apptag error: "
1731
					"write lba x%lx\n", (unsigned long)lba);
1732
				break;
1733
			}
1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744
		}
		if (phba->lpfc_injerr_rapp_cnt) {
			switch (op) {
			case SCSI_PROT_READ_INSERT:
			case SCSI_PROT_READ_STRIP:
			case SCSI_PROT_READ_PASS:
				/*
				 * For READ_STRIP and READ_PASS, force the
				 * error on data being read off the wire. It
				 * should force an IO error to the driver.
				 */
1745 1746
				*apptag = 0xDEAD;
				phba->lpfc_injerr_rapp_cnt--;
1747 1748 1749 1750 1751 1752 1753
				if (phba->lpfc_injerr_rapp_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1754
				rc = BG_ERR_INIT;
1755 1756

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1757
					"0814 BLKGRD: Injecting apptag error: "
1758
					"read lba x%lx\n", (unsigned long)lba);
1759
				break;
1760 1761 1762 1763
			}
		}
	}

1764

1765
	/* Should we change the Guard Tag */
1766 1767 1768 1769
	if (new_guard) {
		if (phba->lpfc_injerr_wgrd_cnt) {
			switch (op) {
			case SCSI_PROT_WRITE_PASS:
1770
				rc = BG_ERR_CHECK;
1771
				/* Drop thru */
1772 1773

			case SCSI_PROT_WRITE_INSERT:
1774
				/*
1775 1776 1777
				 * For WRITE_INSERT, force the
				 * error to be sent on the wire. It should be
				 * detected by the Target.
1778 1779
				 */
				phba->lpfc_injerr_wgrd_cnt--;
1780 1781 1782 1783 1784 1785 1786
				if (phba->lpfc_injerr_wgrd_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1787

1788
				rc |= BG_ERR_TGT | BG_ERR_SWAP;
1789
				/* Signals the caller to swap CRC->CSUM */
1790

1791
				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1792
					"0817 BLKGRD: Injecting guard error: "
1793 1794
					"write lba x%lx\n", (unsigned long)lba);
				break;
1795
			case SCSI_PROT_WRITE_STRIP:
1796
				/*
1797 1798 1799
				 * For WRITE_STRIP and WRITE_PASS,
				 * force the error on data
				 * being copied from SLI-Host to SLI-Port.
1800 1801
				 */
				phba->lpfc_injerr_wgrd_cnt--;
1802 1803 1804 1805 1806 1807 1808
				if (phba->lpfc_injerr_wgrd_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1809

1810
				rc = BG_ERR_INIT | BG_ERR_SWAP;
1811 1812 1813
				/* Signals the caller to swap CRC->CSUM */

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
1814
					"0816 BLKGRD: Injecting guard error: "
1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829
					"write lba x%lx\n", (unsigned long)lba);
				break;
			}
		}
		if (phba->lpfc_injerr_rgrd_cnt) {
			switch (op) {
			case SCSI_PROT_READ_INSERT:
			case SCSI_PROT_READ_STRIP:
			case SCSI_PROT_READ_PASS:
				/*
				 * For READ_STRIP and READ_PASS, force the
				 * error on data being read off the wire. It
				 * should force an IO error to the driver.
				 */
				phba->lpfc_injerr_rgrd_cnt--;
1830 1831 1832 1833 1834 1835 1836
				if (phba->lpfc_injerr_rgrd_cnt == 0) {
					phba->lpfc_injerr_nportid = 0;
					phba->lpfc_injerr_lba =
						LPFC_INJERR_LBA_OFF;
					memset(&phba->lpfc_injerr_wwpn,
						0, sizeof(struct lpfc_name));
				}
1837

1838
				rc = BG_ERR_INIT | BG_ERR_SWAP;
1839 1840 1841 1842 1843 1844
				/* Signals the caller to swap CRC->CSUM */

				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
					"0818 BLKGRD: Injecting guard error: "
					"read lba x%lx\n", (unsigned long)lba);
			}
1845 1846
		}
	}
1847

1848 1849 1850 1851
	return rc;
}
#endif

1852 1853 1854 1855
/**
 * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
 * the specified SCSI command.
 * @phba: The Hba for which this call is being executed.
1856 1857 1858 1859 1860 1861
 * @sc: The SCSI command to examine
 * @txopt: (out) BlockGuard operation for transmitted data
 * @rxopt: (out) BlockGuard operation for received data
 *
 * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
 *
1862
 **/
1863
static int
1864 1865
lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		uint8_t *txop, uint8_t *rxop)
1866
{
1867
	uint8_t ret = 0;
1868

1869
	if (lpfc_cmd_guard_csum(sc)) {
1870 1871 1872
		switch (scsi_get_prot_op(sc)) {
		case SCSI_PROT_READ_INSERT:
		case SCSI_PROT_WRITE_STRIP:
1873
			*rxop = BG_OP_IN_NODIF_OUT_CSUM;
1874
			*txop = BG_OP_IN_CSUM_OUT_NODIF;
1875 1876 1877 1878
			break;

		case SCSI_PROT_READ_STRIP:
		case SCSI_PROT_WRITE_INSERT:
1879
			*rxop = BG_OP_IN_CRC_OUT_NODIF;
1880
			*txop = BG_OP_IN_NODIF_OUT_CRC;
1881 1882
			break;

1883 1884
		case SCSI_PROT_READ_PASS:
		case SCSI_PROT_WRITE_PASS:
1885
			*rxop = BG_OP_IN_CRC_OUT_CSUM;
1886
			*txop = BG_OP_IN_CSUM_OUT_CRC;
1887 1888 1889 1890
			break;

		case SCSI_PROT_NORMAL:
		default:
1891
			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
J
James Smart 已提交
1892 1893
				"9063 BLKGRD: Bad op/guard:%d/IP combination\n",
					scsi_get_prot_op(sc));
1894
			ret = 1;
1895 1896 1897
			break;

		}
J
James Smart 已提交
1898
	} else {
1899 1900 1901
		switch (scsi_get_prot_op(sc)) {
		case SCSI_PROT_READ_STRIP:
		case SCSI_PROT_WRITE_INSERT:
1902
			*rxop = BG_OP_IN_CRC_OUT_NODIF;
1903
			*txop = BG_OP_IN_NODIF_OUT_CRC;
1904 1905 1906 1907
			break;

		case SCSI_PROT_READ_PASS:
		case SCSI_PROT_WRITE_PASS:
1908
			*rxop = BG_OP_IN_CRC_OUT_CRC;
1909
			*txop = BG_OP_IN_CRC_OUT_CRC;
1910 1911 1912 1913
			break;

		case SCSI_PROT_READ_INSERT:
		case SCSI_PROT_WRITE_STRIP:
J
James Smart 已提交
1914
			*rxop = BG_OP_IN_NODIF_OUT_CRC;
1915
			*txop = BG_OP_IN_CRC_OUT_NODIF;
J
James Smart 已提交
1916 1917
			break;

1918 1919
		case SCSI_PROT_NORMAL:
		default:
1920
			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
J
James Smart 已提交
1921 1922
				"9075 BLKGRD: Bad op/guard:%d/CRC combination\n",
					scsi_get_prot_op(sc));
1923
			ret = 1;
1924 1925 1926 1927
			break;
		}
	}

1928
	return ret;
1929 1930
}

1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
 * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
 * the specified SCSI command in order to force a guard tag error.
 * @phba: The Hba for which this call is being executed.
 * @sc: The SCSI command to examine
 * @txopt: (out) BlockGuard operation for transmitted data
 * @rxopt: (out) BlockGuard operation for received data
 *
 * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
 *
 **/
static int
lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		uint8_t *txop, uint8_t *rxop)
{
	uint8_t ret = 0;

1949
	if (lpfc_cmd_guard_csum(sc)) {
1950 1951 1952 1953
		switch (scsi_get_prot_op(sc)) {
		case SCSI_PROT_READ_INSERT:
		case SCSI_PROT_WRITE_STRIP:
			*rxop = BG_OP_IN_NODIF_OUT_CRC;
1954
			*txop = BG_OP_IN_CRC_OUT_NODIF;
1955 1956 1957 1958 1959
			break;

		case SCSI_PROT_READ_STRIP:
		case SCSI_PROT_WRITE_INSERT:
			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
1960
			*txop = BG_OP_IN_NODIF_OUT_CSUM;
1961 1962 1963 1964
			break;

		case SCSI_PROT_READ_PASS:
		case SCSI_PROT_WRITE_PASS:
1965
			*rxop = BG_OP_IN_CSUM_OUT_CRC;
1966
			*txop = BG_OP_IN_CRC_OUT_CSUM;
1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978
			break;

		case SCSI_PROT_NORMAL:
		default:
			break;

		}
	} else {
		switch (scsi_get_prot_op(sc)) {
		case SCSI_PROT_READ_STRIP:
		case SCSI_PROT_WRITE_INSERT:
			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
1979
			*txop = BG_OP_IN_NODIF_OUT_CSUM;
1980 1981 1982 1983
			break;

		case SCSI_PROT_READ_PASS:
		case SCSI_PROT_WRITE_PASS:
1984
			*rxop = BG_OP_IN_CSUM_OUT_CSUM;
1985
			*txop = BG_OP_IN_CSUM_OUT_CSUM;
1986 1987 1988 1989 1990
			break;

		case SCSI_PROT_READ_INSERT:
		case SCSI_PROT_WRITE_STRIP:
			*rxop = BG_OP_IN_NODIF_OUT_CSUM;
1991
			*txop = BG_OP_IN_CSUM_OUT_NODIF;
1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
			break;

		case SCSI_PROT_NORMAL:
		default:
			break;
		}
	}

	return ret;
}
#endif

/**
 * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
 * @phba: The Hba for which this call is being executed.
 * @sc: pointer to scsi command we're working on
 * @bpl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 *
 * This function sets up BPL buffer list for protection groups of
2012 2013 2014 2015 2016 2017 2018 2019 2020
 * type LPFC_PG_TYPE_NO_DIF
 *
 * This is usually used when the HBA is instructed to generate
 * DIFs and insert them into data stream (or strip DIF from
 * incoming data stream)
 *
 * The buffer list consists of just one protection group described
 * below:
 *                                +-------------------------+
2021 2022 2023
 *   start of prot group  -->     |          PDE_5          |
 *                                +-------------------------+
 *                                |          PDE_6          |
2024 2025 2026 2027 2028 2029 2030 2031
 *                                +-------------------------+
 *                                |         Data BDE        |
 *                                +-------------------------+
 *                                |more Data BDE's ... (opt)|
 *                                +-------------------------+
 *
 *
 * Note: Data s/g buffers have been dma mapped
2032 2033 2034
 *
 * Returns the number of BDEs added to the BPL.
 **/
2035 2036 2037 2038 2039
static int
lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		struct ulp_bde64 *bpl, int datasegcnt)
{
	struct scatterlist *sgde = NULL; /* s/g data entry */
2040 2041
	struct lpfc_pde5 *pde5 = NULL;
	struct lpfc_pde6 *pde6 = NULL;
2042
	dma_addr_t physaddr;
2043
	int i = 0, num_bde = 0, status;
2044
	int datadir = sc->sc_data_direction;
2045
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2046
	uint32_t rc;
2047
#endif
2048
	uint32_t checking = 1;
2049
	uint32_t reftag;
J
James Smart 已提交
2050
	unsigned blksize;
2051
	uint8_t txop, rxop;
2052

2053 2054
	status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
	if (status)
2055 2056
		goto out;

2057
	/* extract some info from the scsi command for pde*/
2058
	blksize = lpfc_cmd_blksize(sc);
2059
	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2060

2061
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2062
	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2063
	if (rc) {
2064
		if (rc & BG_ERR_SWAP)
2065
			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2066
		if (rc & BG_ERR_CHECK)
2067 2068
			checking = 0;
	}
2069 2070
#endif

2071 2072 2073 2074 2075
	/* setup PDE5 with what we have */
	pde5 = (struct lpfc_pde5 *) bpl;
	memset(pde5, 0, sizeof(struct lpfc_pde5));
	bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);

2076
	/* Endianness conversion if necessary for PDE5 */
2077
	pde5->word0 = cpu_to_le32(pde5->word0);
J
James Smart 已提交
2078
	pde5->reftag = cpu_to_le32(reftag);
2079

2080 2081 2082 2083 2084 2085 2086 2087 2088 2089
	/* advance bpl and increment bde count */
	num_bde++;
	bpl++;
	pde6 = (struct lpfc_pde6 *) bpl;

	/* setup PDE6 with the rest of the info */
	memset(pde6, 0, sizeof(struct lpfc_pde6));
	bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
	bf_set(pde6_optx, pde6, txop);
	bf_set(pde6_oprx, pde6, rxop);
2090 2091 2092 2093 2094

	/*
	 * We only need to check the data on READs, for WRITEs
	 * protection data is automatically generated, not checked.
	 */
2095
	if (datadir == DMA_FROM_DEVICE) {
2096
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2097 2098 2099 2100
			bf_set(pde6_ce, pde6, checking);
		else
			bf_set(pde6_ce, pde6, 0);

2101
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2102 2103 2104
			bf_set(pde6_re, pde6, checking);
		else
			bf_set(pde6_re, pde6, 0);
2105 2106
	}
	bf_set(pde6_ai, pde6, 1);
J
James Smart 已提交
2107 2108
	bf_set(pde6_ae, pde6, 0);
	bf_set(pde6_apptagval, pde6, 0);
2109

2110
	/* Endianness conversion if necessary for PDE6 */
2111 2112 2113 2114
	pde6->word0 = cpu_to_le32(pde6->word0);
	pde6->word1 = cpu_to_le32(pde6->word1);
	pde6->word2 = cpu_to_le32(pde6->word2);

2115
	/* advance bpl and increment bde count */
2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137
	num_bde++;
	bpl++;

	/* assumption: caller has already run dma_map_sg on command data */
	scsi_for_each_sg(sc, sgde, datasegcnt, i) {
		physaddr = sg_dma_address(sgde);
		bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
		bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
		bpl->tus.f.bdeSize = sg_dma_len(sgde);
		if (datadir == DMA_TO_DEVICE)
			bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
		else
			bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
		bpl->tus.w = le32_to_cpu(bpl->tus.w);
		bpl++;
		num_bde++;
	}

out:
	return num_bde;
}

2138 2139 2140 2141 2142 2143 2144 2145 2146 2147
/**
 * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
 * @phba: The Hba for which this call is being executed.
 * @sc: pointer to scsi command we're working on
 * @bpl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 * @protcnt: number of segment of protection data that have been dma mapped
 *
 * This function sets up BPL buffer list for protection groups of
 * type LPFC_PG_TYPE_DIF
2148 2149 2150 2151 2152 2153 2154 2155 2156
 *
 * This is usually used when DIFs are in their own buffers,
 * separate from the data. The HBA can then by instructed
 * to place the DIFs in the outgoing stream.  For read operations,
 * The HBA could extract the DIFs and place it in DIF buffers.
 *
 * The buffer list for this type consists of one or more of the
 * protection groups described below:
 *                                    +-------------------------+
2157
 *   start of first prot group  -->   |          PDE_5          |
2158
 *                                    +-------------------------+
2159 2160 2161
 *                                    |          PDE_6          |
 *                                    +-------------------------+
 *                                    |      PDE_7 (Prot BDE)   |
2162 2163 2164 2165 2166
 *                                    +-------------------------+
 *                                    |        Data BDE         |
 *                                    +-------------------------+
 *                                    |more Data BDE's ... (opt)|
 *                                    +-------------------------+
2167
 *   start of new  prot group  -->    |          PDE_5          |
2168 2169 2170 2171 2172 2173
 *                                    +-------------------------+
 *                                    |          ...            |
 *                                    +-------------------------+
 *
 * Note: It is assumed that both data and protection s/g buffers have been
 *       mapped for DMA
2174 2175 2176
 *
 * Returns the number of BDEs added to the BPL.
 **/
2177 2178 2179 2180 2181 2182
static int
lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		struct ulp_bde64 *bpl, int datacnt, int protcnt)
{
	struct scatterlist *sgde = NULL; /* s/g data entry */
	struct scatterlist *sgpe = NULL; /* s/g prot entry */
2183 2184
	struct lpfc_pde5 *pde5 = NULL;
	struct lpfc_pde6 *pde6 = NULL;
2185
	struct lpfc_pde7 *pde7 = NULL;
2186 2187
	dma_addr_t dataphysaddr, protphysaddr;
	unsigned short curr_data = 0, curr_prot = 0;
2188 2189
	unsigned int split_offset;
	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
2190 2191
	unsigned int protgrp_blks, protgrp_bytes;
	unsigned int remainder, subtotal;
2192
	int status;
2193 2194 2195
	int datadir = sc->sc_data_direction;
	unsigned char pgdone = 0, alldone = 0;
	unsigned blksize;
2196
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2197
	uint32_t rc;
2198
#endif
2199
	uint32_t checking = 1;
2200
	uint32_t reftag;
2201
	uint8_t txop, rxop;
2202 2203 2204 2205 2206 2207 2208
	int num_bde = 0;

	sgpe = scsi_prot_sglist(sc);
	sgde = scsi_sglist(sc);

	if (!sgpe || !sgde) {
		lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222
				"9020 Invalid s/g entry: data=0x%p prot=0x%p\n",
				sgpe, sgde);
		return 0;
	}

	status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
	if (status)
		goto out;

	/* extract some info from the scsi command */
	blksize = lpfc_cmd_blksize(sc);
	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2223
	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2224
	if (rc) {
2225
		if (rc & BG_ERR_SWAP)
2226
			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2227
		if (rc & BG_ERR_CHECK)
2228 2229 2230 2231 2232 2233
			checking = 0;
	}
#endif

	split_offset = 0;
	do {
2234 2235 2236 2237
		/* Check to see if we ran out of space */
		if (num_bde >= (phba->cfg_total_seg_cnt - 2))
			return num_bde + 3;

2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256
		/* setup PDE5 with what we have */
		pde5 = (struct lpfc_pde5 *) bpl;
		memset(pde5, 0, sizeof(struct lpfc_pde5));
		bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);

		/* Endianness conversion if necessary for PDE5 */
		pde5->word0 = cpu_to_le32(pde5->word0);
		pde5->reftag = cpu_to_le32(reftag);

		/* advance bpl and increment bde count */
		num_bde++;
		bpl++;
		pde6 = (struct lpfc_pde6 *) bpl;

		/* setup PDE6 with the rest of the info */
		memset(pde6, 0, sizeof(struct lpfc_pde6));
		bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
		bf_set(pde6_optx, pde6, txop);
		bf_set(pde6_oprx, pde6, rxop);
2257

2258
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2259 2260 2261 2262
			bf_set(pde6_ce, pde6, checking);
		else
			bf_set(pde6_ce, pde6, 0);

2263
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2264 2265 2266 2267
			bf_set(pde6_re, pde6, checking);
		else
			bf_set(pde6_re, pde6, 0);

2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314
		bf_set(pde6_ai, pde6, 1);
		bf_set(pde6_ae, pde6, 0);
		bf_set(pde6_apptagval, pde6, 0);

		/* Endianness conversion if necessary for PDE6 */
		pde6->word0 = cpu_to_le32(pde6->word0);
		pde6->word1 = cpu_to_le32(pde6->word1);
		pde6->word2 = cpu_to_le32(pde6->word2);

		/* advance bpl and increment bde count */
		num_bde++;
		bpl++;

		/* setup the first BDE that points to protection buffer */
		protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
		protgroup_len = sg_dma_len(sgpe) - protgroup_offset;

		/* must be integer multiple of the DIF block length */
		BUG_ON(protgroup_len % 8);

		pde7 = (struct lpfc_pde7 *) bpl;
		memset(pde7, 0, sizeof(struct lpfc_pde7));
		bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR);

		pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
		pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));

		protgrp_blks = protgroup_len / 8;
		protgrp_bytes = protgrp_blks * blksize;

		/* check if this pde is crossing the 4K boundary; if so split */
		if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) {
			protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff);
			protgroup_offset += protgroup_remainder;
			protgrp_blks = protgroup_remainder / 8;
			protgrp_bytes = protgrp_blks * blksize;
		} else {
			protgroup_offset = 0;
			curr_prot++;
		}

		num_bde++;

		/* setup BDE's for data blocks associated with DIF data */
		pgdone = 0;
		subtotal = 0; /* total bytes processed for current prot grp */
		while (!pgdone) {
2315 2316 2317 2318
			/* Check to see if we ran out of space */
			if (num_bde >= phba->cfg_total_seg_cnt)
				return num_bde + 1;

2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432
			if (!sgde) {
				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
					"9065 BLKGRD:%s Invalid data segment\n",
						__func__);
				return 0;
			}
			bpl++;
			dataphysaddr = sg_dma_address(sgde) + split_offset;
			bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr));
			bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr));

			remainder = sg_dma_len(sgde) - split_offset;

			if ((subtotal + remainder) <= protgrp_bytes) {
				/* we can use this whole buffer */
				bpl->tus.f.bdeSize = remainder;
				split_offset = 0;

				if ((subtotal + remainder) == protgrp_bytes)
					pgdone = 1;
			} else {
				/* must split this buffer with next prot grp */
				bpl->tus.f.bdeSize = protgrp_bytes - subtotal;
				split_offset += bpl->tus.f.bdeSize;
			}

			subtotal += bpl->tus.f.bdeSize;

			if (datadir == DMA_TO_DEVICE)
				bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
			else
				bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
			bpl->tus.w = le32_to_cpu(bpl->tus.w);

			num_bde++;
			curr_data++;

			if (split_offset)
				break;

			/* Move to the next s/g segment if possible */
			sgde = sg_next(sgde);

		}

		if (protgroup_offset) {
			/* update the reference tag */
			reftag += protgrp_blks;
			bpl++;
			continue;
		}

		/* are we done ? */
		if (curr_prot == protcnt) {
			alldone = 1;
		} else if (curr_prot < protcnt) {
			/* advance to next prot buffer */
			sgpe = sg_next(sgpe);
			bpl++;

			/* update the reference tag */
			reftag += protgrp_blks;
		} else {
			/* if we're here, we have a bug */
			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
				"9054 BLKGRD: bug in %s\n", __func__);
		}

	} while (!alldone);
out:

	return num_bde;
}

/**
 * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
 * @phba: The Hba for which this call is being executed.
 * @sc: pointer to scsi command we're working on
 * @sgl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 *
 * This function sets up SGL buffer list for protection groups of
 * type LPFC_PG_TYPE_NO_DIF
 *
 * This is usually used when the HBA is instructed to generate
 * DIFs and insert them into data stream (or strip DIF from
 * incoming data stream)
 *
 * The buffer list consists of just one protection group described
 * below:
 *                                +-------------------------+
 *   start of prot group  -->     |         DI_SEED         |
 *                                +-------------------------+
 *                                |         Data SGE        |
 *                                +-------------------------+
 *                                |more Data SGE's ... (opt)|
 *                                +-------------------------+
 *
 *
 * Note: Data s/g buffers have been dma mapped
 *
 * Returns the number of SGEs added to the SGL.
 **/
static int
lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		struct sli4_sge *sgl, int datasegcnt)
{
	struct scatterlist *sgde = NULL; /* s/g data entry */
	struct sli4_sge_diseed *diseed = NULL;
	dma_addr_t physaddr;
	int i = 0, num_sge = 0, status;
	uint32_t reftag;
	unsigned blksize;
	uint8_t txop, rxop;
2433
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2434
	uint32_t rc;
2435
#endif
2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448
	uint32_t checking = 1;
	uint32_t dma_len;
	uint32_t dma_offset = 0;

	status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
	if (status)
		goto out;

	/* extract some info from the scsi command for pde*/
	blksize = lpfc_cmd_blksize(sc);
	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2449
	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2450
	if (rc) {
2451
		if (rc & BG_ERR_SWAP)
2452
			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2453
		if (rc & BG_ERR_CHECK)
2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466
			checking = 0;
	}
#endif

	/* setup DISEED with what we have */
	diseed = (struct sli4_sge_diseed *) sgl;
	memset(diseed, 0, sizeof(struct sli4_sge_diseed));
	bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);

	/* Endianness conversion if necessary */
	diseed->ref_tag = cpu_to_le32(reftag);
	diseed->ref_tag_tran = diseed->ref_tag;

2467 2468 2469 2470 2471
	/*
	 * We only need to check the data on READs, for WRITEs
	 * protection data is automatically generated, not checked.
	 */
	if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2472
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD))
2473 2474 2475 2476
			bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
		else
			bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);

2477
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2478 2479 2480 2481 2482
			bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
		else
			bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
	}

2483 2484 2485
	/* setup DISEED with the rest of the info */
	bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
	bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2486

2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577
	bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
	bf_set(lpfc_sli4_sge_dif_me, diseed, 0);

	/* Endianness conversion if necessary for DISEED */
	diseed->word2 = cpu_to_le32(diseed->word2);
	diseed->word3 = cpu_to_le32(diseed->word3);

	/* advance bpl and increment sge count */
	num_sge++;
	sgl++;

	/* assumption: caller has already run dma_map_sg on command data */
	scsi_for_each_sg(sc, sgde, datasegcnt, i) {
		physaddr = sg_dma_address(sgde);
		dma_len = sg_dma_len(sgde);
		sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
		sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
		if ((i + 1) == datasegcnt)
			bf_set(lpfc_sli4_sge_last, sgl, 1);
		else
			bf_set(lpfc_sli4_sge_last, sgl, 0);
		bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);

		sgl->sge_len = cpu_to_le32(dma_len);
		dma_offset += dma_len;

		sgl++;
		num_sge++;
	}

out:
	return num_sge;
}

/**
 * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
 * @phba: The Hba for which this call is being executed.
 * @sc: pointer to scsi command we're working on
 * @sgl: pointer to buffer list for protection groups
 * @datacnt: number of segments of data that have been dma mapped
 * @protcnt: number of segment of protection data that have been dma mapped
 *
 * This function sets up SGL buffer list for protection groups of
 * type LPFC_PG_TYPE_DIF
 *
 * This is usually used when DIFs are in their own buffers,
 * separate from the data. The HBA can then by instructed
 * to place the DIFs in the outgoing stream.  For read operations,
 * The HBA could extract the DIFs and place it in DIF buffers.
 *
 * The buffer list for this type consists of one or more of the
 * protection groups described below:
 *                                    +-------------------------+
 *   start of first prot group  -->   |         DISEED          |
 *                                    +-------------------------+
 *                                    |      DIF (Prot SGE)     |
 *                                    +-------------------------+
 *                                    |        Data SGE         |
 *                                    +-------------------------+
 *                                    |more Data SGE's ... (opt)|
 *                                    +-------------------------+
 *   start of new  prot group  -->    |         DISEED          |
 *                                    +-------------------------+
 *                                    |          ...            |
 *                                    +-------------------------+
 *
 * Note: It is assumed that both data and protection s/g buffers have been
 *       mapped for DMA
 *
 * Returns the number of SGEs added to the SGL.
 **/
static int
lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
		struct sli4_sge *sgl, int datacnt, int protcnt)
{
	struct scatterlist *sgde = NULL; /* s/g data entry */
	struct scatterlist *sgpe = NULL; /* s/g prot entry */
	struct sli4_sge_diseed *diseed = NULL;
	dma_addr_t dataphysaddr, protphysaddr;
	unsigned short curr_data = 0, curr_prot = 0;
	unsigned int split_offset;
	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
	unsigned int protgrp_blks, protgrp_bytes;
	unsigned int remainder, subtotal;
	int status;
	unsigned char pgdone = 0, alldone = 0;
	unsigned blksize;
	uint32_t reftag;
	uint8_t txop, rxop;
	uint32_t dma_len;
2578
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2579
	uint32_t rc;
2580
#endif
2581 2582 2583 2584 2585 2586 2587 2588 2589 2590
	uint32_t checking = 1;
	uint32_t dma_offset = 0;
	int num_sge = 0;

	sgpe = scsi_prot_sglist(sc);
	sgde = scsi_sglist(sc);

	if (!sgpe || !sgde) {
		lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
				"9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
2591 2592 2593 2594
				sgpe, sgde);
		return 0;
	}

2595 2596
	status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
	if (status)
2597 2598
		goto out;

2599
	/* extract some info from the scsi command */
2600
	blksize = lpfc_cmd_blksize(sc);
2601
	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
2602

2603
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
2604
	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
2605
	if (rc) {
2606
		if (rc & BG_ERR_SWAP)
2607
			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
2608
		if (rc & BG_ERR_CHECK)
2609 2610
			checking = 0;
	}
2611 2612
#endif

2613 2614
	split_offset = 0;
	do {
2615 2616 2617 2618
		/* Check to see if we ran out of space */
		if (num_sge >= (phba->cfg_total_seg_cnt - 2))
			return num_sge + 3;

2619 2620 2621 2622 2623 2624 2625 2626 2627
		/* setup DISEED with what we have */
		diseed = (struct sli4_sge_diseed *) sgl;
		memset(diseed, 0, sizeof(struct sli4_sge_diseed));
		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);

		/* Endianness conversion if necessary */
		diseed->ref_tag = cpu_to_le32(reftag);
		diseed->ref_tag_tran = diseed->ref_tag;

2628
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_GUARD)) {
2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646
			bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);

		} else {
			bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
			/*
			 * When in this mode, the hardware will replace
			 * the guard tag from the host with a
			 * newly generated good CRC for the wire.
			 * Switch to raw mode here to avoid this
			 * behavior. What the host sends gets put on the wire.
			 */
			if (txop == BG_OP_IN_CRC_OUT_CRC) {
				txop = BG_OP_RAW_MODE;
				rxop = BG_OP_RAW_MODE;
			}
		}


2647
		if (lpfc_cmd_protect(sc, LPFC_CHECK_PROTECT_REF))
2648 2649 2650 2651
			bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
		else
			bf_set(lpfc_sli4_sge_dif_re, diseed, 0);

2652 2653 2654
		/* setup DISEED with the rest of the info */
		bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
		bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
2655

2656 2657 2658 2659 2660 2661 2662 2663 2664 2665
		bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
		bf_set(lpfc_sli4_sge_dif_me, diseed, 0);

		/* Endianness conversion if necessary for DISEED */
		diseed->word2 = cpu_to_le32(diseed->word2);
		diseed->word3 = cpu_to_le32(diseed->word3);

		/* advance sgl and increment bde count */
		num_sge++;
		sgl++;
2666 2667

		/* setup the first BDE that points to protection buffer */
2668 2669
		protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
		protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
2670 2671 2672 2673

		/* must be integer multiple of the DIF block length */
		BUG_ON(protgroup_len % 8);

2674 2675 2676 2677 2678 2679
		/* Now setup DIF SGE */
		sgl->word2 = 0;
		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
		sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
		sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
		sgl->word2 = cpu_to_le32(sgl->word2);
2680

2681 2682 2683
		protgrp_blks = protgroup_len / 8;
		protgrp_bytes = protgrp_blks * blksize;

2684 2685 2686
		/* check if DIF SGE is crossing the 4K boundary; if so split */
		if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
			protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
2687 2688
			protgroup_offset += protgroup_remainder;
			protgrp_blks = protgroup_remainder / 8;
J
James Smart 已提交
2689
			protgrp_bytes = protgrp_blks * blksize;
2690 2691 2692 2693
		} else {
			protgroup_offset = 0;
			curr_prot++;
		}
2694

2695
		num_sge++;
2696

2697
		/* setup SGE's for data blocks associated with DIF data */
2698 2699 2700
		pgdone = 0;
		subtotal = 0; /* total bytes processed for current prot grp */
		while (!pgdone) {
2701 2702 2703 2704
			/* Check to see if we ran out of space */
			if (num_sge >= phba->cfg_total_seg_cnt)
				return num_sge + 1;

2705
			if (!sgde) {
2706
				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2707
					"9086 BLKGRD:%s Invalid data segment\n",
2708 2709 2710
						__func__);
				return 0;
			}
2711
			sgl++;
2712 2713 2714 2715 2716 2717
			dataphysaddr = sg_dma_address(sgde) + split_offset;

			remainder = sg_dma_len(sgde) - split_offset;

			if ((subtotal + remainder) <= protgrp_bytes) {
				/* we can use this whole buffer */
2718
				dma_len = remainder;
2719 2720 2721 2722 2723 2724
				split_offset = 0;

				if ((subtotal + remainder) == protgrp_bytes)
					pgdone = 1;
			} else {
				/* must split this buffer with next prot grp */
2725 2726
				dma_len = protgrp_bytes - subtotal;
				split_offset += dma_len;
2727 2728
			}

2729
			subtotal += dma_len;
2730

2731 2732 2733 2734 2735
			sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
			sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
			bf_set(lpfc_sli4_sge_last, sgl, 0);
			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
2736

2737 2738 2739 2740
			sgl->sge_len = cpu_to_le32(dma_len);
			dma_offset += dma_len;

			num_sge++;
2741 2742 2743 2744 2745 2746 2747 2748 2749
			curr_data++;

			if (split_offset)
				break;

			/* Move to the next s/g segment if possible */
			sgde = sg_next(sgde);
		}

2750 2751 2752
		if (protgroup_offset) {
			/* update the reference tag */
			reftag += protgrp_blks;
2753
			sgl++;
2754 2755 2756
			continue;
		}

2757 2758
		/* are we done ? */
		if (curr_prot == protcnt) {
2759
			bf_set(lpfc_sli4_sge_last, sgl, 1);
2760 2761 2762 2763
			alldone = 1;
		} else if (curr_prot < protcnt) {
			/* advance to next prot buffer */
			sgpe = sg_next(sgpe);
2764
			sgl++;
2765 2766 2767 2768 2769

			/* update the reference tag */
			reftag += protgrp_blks;
		} else {
			/* if we're here, we have a bug */
2770
			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
2771
				"9085 BLKGRD: bug in %s\n", __func__);
2772 2773 2774
		}

	} while (!alldone);
2775

2776 2777
out:

2778
	return num_sge;
2779
}
2780

2781 2782 2783 2784 2785
/**
 * lpfc_prot_group_type - Get prtotection group type of SCSI command
 * @phba: The Hba for which this call is being executed.
 * @sc: pointer to scsi command we're working on
 *
2786 2787 2788
 * Given a SCSI command that supports DIF, determine composition of protection
 * groups involved in setting up buffer lists
 *
2789 2790 2791
 * Returns: Protection group type (with or without DIF)
 *
 **/
2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809
static int
lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
{
	int ret = LPFC_PG_TYPE_INVALID;
	unsigned char op = scsi_get_prot_op(sc);

	switch (op) {
	case SCSI_PROT_READ_STRIP:
	case SCSI_PROT_WRITE_INSERT:
		ret = LPFC_PG_TYPE_NO_DIF;
		break;
	case SCSI_PROT_READ_INSERT:
	case SCSI_PROT_WRITE_STRIP:
	case SCSI_PROT_READ_PASS:
	case SCSI_PROT_WRITE_PASS:
		ret = LPFC_PG_TYPE_DIF_BUF;
		break;
	default:
2810 2811 2812 2813
		if (phba)
			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
					"9021 Unsupported protection op:%d\n",
					op);
2814 2815 2816 2817 2818
		break;
	}
	return ret;
}

2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839
/**
 * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be adjusted.
 *
 * Adjust the data length to account for how much data
 * is actually on the wire.
 *
 * returns the adjusted data length
 **/
static int
lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
		       struct lpfc_scsi_buf *lpfc_cmd)
{
	struct scsi_cmnd *sc = lpfc_cmd->pCmd;
	int fcpdl;

	fcpdl = scsi_bufflen(sc);

	/* Check if there is protection data on the wire */
	if (sc->sc_data_direction == DMA_FROM_DEVICE) {
2840
		/* Read check for protection data */
2841 2842 2843 2844
		if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
			return fcpdl;

	} else {
2845
		/* Write check for protection data */
2846 2847 2848 2849 2850 2851
		if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
			return fcpdl;
	}

	/*
	 * If we are in DIF Type 1 mode every data block has a 8 byte
2852 2853
	 * DIF (trailer) attached to it. Must ajust FCP data length
	 * to account for the protection data.
2854
	 */
2855
	fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
2856 2857 2858 2859

	return fcpdl;
}

2860 2861 2862 2863 2864
/**
 * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
 *
2865 2866 2867
 * This is the protection/DIF aware version of
 * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
 * two functions eventually, but for now, it's here
2868
 **/
2869
static int
2870
lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
2871 2872 2873 2874 2875 2876 2877 2878 2879
		struct lpfc_scsi_buf *lpfc_cmd)
{
	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
	struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
	uint32_t num_bde = 0;
	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
	int prot_group_type = 0;
2880
	int fcpdl;
2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900

	/*
	 * Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
	 *  fcp_rsp regions to the first data bde entry
	 */
	bpl += 2;
	if (scsi_sg_count(scsi_cmnd)) {
		/*
		 * The driver stores the segment count returned from pci_map_sg
		 * because this a count of dma-mappings used to map the use_sg
		 * pages.  They are not guaranteed to be the same for those
		 * architectures that implement an IOMMU.
		 */
		datasegcnt = dma_map_sg(&phba->pcidev->dev,
					scsi_sglist(scsi_cmnd),
					scsi_sg_count(scsi_cmnd), datadir);
		if (unlikely(!datasegcnt))
			return 1;

		lpfc_cmd->seg_cnt = datasegcnt;
2901 2902 2903 2904

		/* First check if data segment count from SCSI Layer is good */
		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
			goto err;
2905 2906 2907 2908 2909

		prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);

		switch (prot_group_type) {
		case LPFC_PG_TYPE_NO_DIF:
2910 2911 2912 2913 2914

			/* Here we need to add a PDE5 and PDE6 to the count */
			if ((lpfc_cmd->seg_cnt + 2) > phba->cfg_total_seg_cnt)
				goto err;

2915 2916
			num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl,
					datasegcnt);
2917
			/* we should have 2 or more entries in buffer list */
2918 2919 2920
			if (num_bde < 2)
				goto err;
			break;
2921 2922

		case LPFC_PG_TYPE_DIF_BUF:
2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936
			/*
			 * This type indicates that protection buffers are
			 * passed to the driver, so that needs to be prepared
			 * for DMA
			 */
			protsegcnt = dma_map_sg(&phba->pcidev->dev,
					scsi_prot_sglist(scsi_cmnd),
					scsi_prot_sg_count(scsi_cmnd), datadir);
			if (unlikely(!protsegcnt)) {
				scsi_dma_unmap(scsi_cmnd);
				return 1;
			}

			lpfc_cmd->prot_seg_cnt = protsegcnt;
2937 2938 2939 2940 2941 2942 2943 2944

			/*
			 * There is a minimun of 4 BPLs used for every
			 * protection data segment.
			 */
			if ((lpfc_cmd->prot_seg_cnt * 4) >
			    (phba->cfg_total_seg_cnt - 2))
				goto err;
2945 2946 2947

			num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl,
					datasegcnt, protsegcnt);
2948
			/* we should have 3 or more entries in buffer list */
2949 2950
			if ((num_bde < 3) ||
			    (num_bde > phba->cfg_total_seg_cnt))
2951 2952
				goto err;
			break;
2953

2954 2955
		case LPFC_PG_TYPE_INVALID:
		default:
2956 2957 2958
			scsi_dma_unmap(scsi_cmnd);
			lpfc_cmd->seg_cnt = 0;

2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976
			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
					"9022 Unexpected protection group %i\n",
					prot_group_type);
			return 1;
		}
	}

	/*
	 * Finish initializing those IOCB fields that are dependent on the
	 * scsi_cmnd request_buffer.  Note that the bdeSize is explicitly
	 * reinitialized since all iocb memory resources are used many times
	 * for transmit, receive, and continuation bpl's.
	 */
	iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
	iocb_cmd->un.fcpi64.bdl.bdeSize += (num_bde * sizeof(struct ulp_bde64));
	iocb_cmd->ulpBdeCount = 1;
	iocb_cmd->ulpLe = 1;

2977
	fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
2978 2979 2980 2981 2982 2983 2984 2985
	fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);

	/*
	 * Due to difference in data length between DIF/non-DIF paths,
	 * we need to set word 4 of IOCB here
	 */
	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;

已提交
2986
	return 0;
2987
err:
2988 2989 2990 2991 2992 2993 2994
	if (lpfc_cmd->seg_cnt)
		scsi_dma_unmap(scsi_cmnd);
	if (lpfc_cmd->prot_seg_cnt)
		dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
			     scsi_prot_sg_count(scsi_cmnd),
			     scsi_cmnd->sc_data_direction);

2995
	lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
2996 2997 2998 2999
			"9023 Cannot setup S/G List for HBA"
			"IO segs %d/%d BPL %d SCSI %d: %d %d\n",
			lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
			phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
3000
			prot_group_type, num_bde);
3001 3002 3003

	lpfc_cmd->seg_cnt = 0;
	lpfc_cmd->prot_seg_cnt = 0;
3004 3005 3006
	return 1;
}

3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091
/*
 * This function calcuates the T10 DIF guard tag
 * on the specified data using a CRC algorithmn
 * using crc_t10dif.
 */
uint16_t
lpfc_bg_crc(uint8_t *data, int count)
{
	uint16_t crc = 0;
	uint16_t x;

	crc = crc_t10dif(data, count);
	x = cpu_to_be16(crc);
	return x;
}

/*
 * This function calcuates the T10 DIF guard tag
 * on the specified data using a CSUM algorithmn
 * using ip_compute_csum.
 */
uint16_t
lpfc_bg_csum(uint8_t *data, int count)
{
	uint16_t ret;

	ret = ip_compute_csum(data, count);
	return ret;
}

/*
 * This function examines the protection data to try to determine
 * what type of T10-DIF error occurred.
 */
void
lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
	struct scatterlist *sgpe; /* s/g prot entry */
	struct scatterlist *sgde; /* s/g data entry */
	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
	struct scsi_dif_tuple *src = NULL;
	uint8_t *data_src = NULL;
	uint16_t guard_tag, guard_type;
	uint16_t start_app_tag, app_tag;
	uint32_t start_ref_tag, ref_tag;
	int prot, protsegcnt;
	int err_type, len, data_len;
	int chk_ref, chk_app, chk_guard;
	uint16_t sum;
	unsigned blksize;

	err_type = BGS_GUARD_ERR_MASK;
	sum = 0;
	guard_tag = 0;

	/* First check to see if there is protection data to examine */
	prot = scsi_get_prot_op(cmd);
	if ((prot == SCSI_PROT_READ_STRIP) ||
	    (prot == SCSI_PROT_WRITE_INSERT) ||
	    (prot == SCSI_PROT_NORMAL))
		goto out;

	/* Currently the driver just supports ref_tag and guard_tag checking */
	chk_ref = 1;
	chk_app = 0;
	chk_guard = 0;

	/* Setup a ptr to the protection data provided by the SCSI host */
	sgpe = scsi_prot_sglist(cmd);
	protsegcnt = lpfc_cmd->prot_seg_cnt;

	if (sgpe && protsegcnt) {

		/*
		 * We will only try to verify guard tag if the segment
		 * data length is a multiple of the blksize.
		 */
		sgde = scsi_sglist(cmd);
		blksize = lpfc_cmd_blksize(cmd);
		data_src = (uint8_t *)sg_virt(sgde);
		data_len = sgde->length;
		if ((data_len & (blksize - 1)) == 0)
			chk_guard = 1;
		guard_type = scsi_host_get_guard(cmd->device->host);

3092
		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
3093
		start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108
		start_app_tag = src->app_tag;
		len = sgpe->length;
		while (src && protsegcnt) {
			while (len) {

				/*
				 * First check to see if a protection data
				 * check is valid
				 */
				if ((src->ref_tag == 0xffffffff) ||
				    (src->app_tag == 0xffff)) {
					start_ref_tag++;
					goto skipit;
				}

3109
				/* First Guard Tag checking */
3110 3111
				if (chk_guard) {
					guard_tag = src->guard_tag;
3112
					if (lpfc_cmd_guard_csum(cmd))
3113 3114 3115 3116 3117 3118 3119 3120 3121 3122
						sum = lpfc_bg_csum(data_src,
								   blksize);
					else
						sum = lpfc_bg_crc(data_src,
								  blksize);
					if ((guard_tag != sum)) {
						err_type = BGS_GUARD_ERR_MASK;
						goto out;
					}
				}
3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137

				/* Reference Tag checking */
				ref_tag = be32_to_cpu(src->ref_tag);
				if (chk_ref && (ref_tag != start_ref_tag)) {
					err_type = BGS_REFTAG_ERR_MASK;
					goto out;
				}
				start_ref_tag++;

				/* App Tag checking */
				app_tag = src->app_tag;
				if (chk_app && (app_tag != start_app_tag)) {
					err_type = BGS_APPTAG_ERR_MASK;
					goto out;
				}
3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214
skipit:
				len -= sizeof(struct scsi_dif_tuple);
				if (len < 0)
					len = 0;
				src++;

				data_src += blksize;
				data_len -= blksize;

				/*
				 * Are we at the end of the Data segment?
				 * The data segment is only used for Guard
				 * tag checking.
				 */
				if (chk_guard && (data_len == 0)) {
					chk_guard = 0;
					sgde = sg_next(sgde);
					if (!sgde)
						goto out;

					data_src = (uint8_t *)sg_virt(sgde);
					data_len = sgde->length;
					if ((data_len & (blksize - 1)) == 0)
						chk_guard = 1;
				}
			}

			/* Goto the next Protection data segment */
			sgpe = sg_next(sgpe);
			if (sgpe) {
				src = (struct scsi_dif_tuple *)sg_virt(sgpe);
				len = sgpe->length;
			} else {
				src = NULL;
			}
			protsegcnt--;
		}
	}
out:
	if (err_type == BGS_GUARD_ERR_MASK) {
		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
					0x10, 0x1);
		cmd->result = DRIVER_SENSE << 24
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
		phba->bg_guard_err_cnt++;
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9069 BLKGRD: LBA %lx grd_tag error %x != %x\n",
				(unsigned long)scsi_get_lba(cmd),
				sum, guard_tag);

	} else if (err_type == BGS_REFTAG_ERR_MASK) {
		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
					0x10, 0x3);
		cmd->result = DRIVER_SENSE << 24
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

		phba->bg_reftag_err_cnt++;
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9066 BLKGRD: LBA %lx ref_tag error %x != %x\n",
				(unsigned long)scsi_get_lba(cmd),
				ref_tag, start_ref_tag);

	} else if (err_type == BGS_APPTAG_ERR_MASK) {
		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
					0x10, 0x2);
		cmd->result = DRIVER_SENSE << 24
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

		phba->bg_apptag_err_cnt++;
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9041 BLKGRD: LBA %lx app_tag error %x != %x\n",
				(unsigned long)scsi_get_lba(cmd),
				app_tag, start_app_tag);
	}
}


3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239
/*
 * This function checks for BlockGuard errors detected by
 * the HBA.  In case of errors, the ASC/ASCQ fields in the
 * sense buffer will be set accordingly, paired with
 * ILLEGAL_REQUEST to signal to the kernel that the HBA
 * detected corruption.
 *
 * Returns:
 *  0 - No error found
 *  1 - BlockGuard error found
 * -1 - Internal error (bad profile, ...etc)
 */
static int
lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
			struct lpfc_iocbq *pIocbOut)
{
	struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
	struct sli3_bg_fields *bgf = &pIocbOut->iocb.unsli3.sli3_bg;
	int ret = 0;
	uint32_t bghm = bgf->bghm;
	uint32_t bgstat = bgf->bgstat;
	uint64_t failing_sector = 0;

	spin_lock(&_dump_buf_lock);
	if (!_dump_buf_done) {
3240 3241
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,  "9070 BLKGRD: Saving"
			" Data for %u blocks to debugfs\n",
3242
				(cmd->cmnd[7] << 8 | cmd->cmnd[8]));
3243
		lpfc_debug_save_data(phba, cmd);
3244 3245 3246 3247

		/* If we have a prot sgl, save the DIF buffer */
		if (lpfc_prot_group_type(phba, cmd) ==
				LPFC_PG_TYPE_DIF_BUF) {
3248 3249 3250 3251
			lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9071 BLKGRD: "
				"Saving DIF for %u blocks to debugfs\n",
				(cmd->cmnd[7] << 8 | cmd->cmnd[8]));
			lpfc_debug_save_dif(phba, cmd);
3252 3253 3254 3255 3256 3257 3258 3259
		}

		_dump_buf_done = 1;
	}
	spin_unlock(&_dump_buf_lock);

	if (lpfc_bgs_get_invalid_prof(bgstat)) {
		cmd->result = ScsiResult(DID_ERROR, 0);
3260 3261 3262 3263 3264 3265
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9072 BLKGRD: Invalid BG Profile in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);
3266 3267 3268 3269 3270 3271
		ret = (-1);
		goto out;
	}

	if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
		cmd->result = ScsiResult(DID_ERROR, 0);
3272 3273 3274 3275 3276 3277
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9073 BLKGRD: Invalid BG PDIF Block in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);
3278 3279 3280 3281 3282 3283 3284 3285 3286
		ret = (-1);
		goto out;
	}

	if (lpfc_bgs_get_guard_err(bgstat)) {
		ret = 1;

		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
				0x10, 0x1);
M
Martin K. Petersen 已提交
3287
		cmd->result = DRIVER_SENSE << 24
3288 3289
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
		phba->bg_guard_err_cnt++;
3290 3291 3292 3293 3294 3295
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9055 BLKGRD: Guard Tag error in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);
3296 3297 3298 3299 3300 3301 3302
	}

	if (lpfc_bgs_get_reftag_err(bgstat)) {
		ret = 1;

		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
				0x10, 0x3);
M
Martin K. Petersen 已提交
3303
		cmd->result = DRIVER_SENSE << 24
3304 3305 3306
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

		phba->bg_reftag_err_cnt++;
3307 3308 3309 3310 3311 3312
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9056 BLKGRD: Ref Tag error in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);
3313 3314 3315 3316 3317 3318 3319
	}

	if (lpfc_bgs_get_apptag_err(bgstat)) {
		ret = 1;

		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
				0x10, 0x2);
M
Martin K. Petersen 已提交
3320
		cmd->result = DRIVER_SENSE << 24
3321 3322 3323
			| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);

		phba->bg_apptag_err_cnt++;
3324 3325 3326 3327 3328 3329
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9061 BLKGRD: App Tag error in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);
3330 3331 3332 3333 3334
	}

	if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
		/*
		 * setup sense data descriptor 0 per SPC-4 as an information
J
James Smart 已提交
3335 3336 3337
		 * field, and put the failing LBA in it.
		 * This code assumes there was also a guard/app/ref tag error
		 * indication.
3338
		 */
J
James Smart 已提交
3339 3340 3341 3342
		cmd->sense_buffer[7] = 0xc;   /* Additional sense length */
		cmd->sense_buffer[8] = 0;     /* Information descriptor type */
		cmd->sense_buffer[9] = 0xa;   /* Additional descriptor length */
		cmd->sense_buffer[10] = 0x80; /* Validity bit */
3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357

		/* bghm is a "on the wire" FC frame based count */
		switch (scsi_get_prot_op(cmd)) {
		case SCSI_PROT_READ_INSERT:
		case SCSI_PROT_WRITE_STRIP:
			bghm /= cmd->device->sector_size;
			break;
		case SCSI_PROT_READ_STRIP:
		case SCSI_PROT_WRITE_INSERT:
		case SCSI_PROT_READ_PASS:
		case SCSI_PROT_WRITE_PASS:
			bghm /= (cmd->device->sector_size +
				sizeof(struct scsi_dif_tuple));
			break;
		}
3358 3359 3360 3361

		failing_sector = scsi_get_lba(cmd);
		failing_sector += bghm;

J
James Smart 已提交
3362 3363
		/* Descriptor Information */
		put_unaligned_be64(failing_sector, &cmd->sense_buffer[12]);
3364 3365 3366 3367
	}

	if (!ret) {
		/* No error was reported - problem in FW? */
3368 3369 3370 3371 3372 3373 3374 3375 3376
		lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_BG,
				"9057 BLKGRD: Unknown error in cmd"
				" 0x%x lba 0x%llx blk cnt 0x%x "
				"bgstat=x%x bghm=x%x\n", cmd->cmnd[0],
				(unsigned long long)scsi_get_lba(cmd),
				blk_rq_sectors(cmd->request), bgstat, bghm);

		/* Calcuate what type of error it was */
		lpfc_calc_bg_err(phba, lpfc_cmd);
3377 3378 3379
	}
out:
	return ret;
已提交
3380 3381
}

3382 3383 3384 3385 3386 3387 3388 3389 3390
/**
 * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
 * field of @lpfc_cmd for device with SLI-4 interface spec.
 *
 * Return codes:
3391 3392
 *	1 - Error
 *	0 - Success
3393 3394 3395 3396 3397 3398 3399 3400
 **/
static int
lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
	struct scatterlist *sgel = NULL;
	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
3401
	struct sli4_sge *first_data_sgl;
3402 3403 3404 3405 3406 3407
	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
	dma_addr_t physaddr;
	uint32_t num_bde = 0;
	uint32_t dma_len;
	uint32_t dma_offset = 0;
	int nseg;
3408
	struct ulp_bde64 *bde;
3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432

	/*
	 * There are three possibilities here - use scatter-gather segment, use
	 * the single mapping, or neither.  Start the lpfc command prep by
	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
	 * data bde entry.
	 */
	if (scsi_sg_count(scsi_cmnd)) {
		/*
		 * The driver stores the segment count returned from pci_map_sg
		 * because this a count of dma-mappings used to map the use_sg
		 * pages.  They are not guaranteed to be the same for those
		 * architectures that implement an IOMMU.
		 */

		nseg = scsi_dma_map(scsi_cmnd);
		if (unlikely(!nseg))
			return 1;
		sgl += 1;
		/* clear the last flag in the fcp_rsp map entry */
		sgl->word2 = le32_to_cpu(sgl->word2);
		bf_set(lpfc_sli4_sge_last, sgl, 0);
		sgl->word2 = cpu_to_le32(sgl->word2);
		sgl += 1;
3433
		first_data_sgl = sgl;
3434 3435
		lpfc_cmd->seg_cnt = nseg;
		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
3436 3437 3438 3439
			lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
				" %s: Too many sg segments from "
				"dma_map_sg.  Config %d, seg_cnt %d\n",
				__func__, phba->cfg_sg_seg_cnt,
3440
			       lpfc_cmd->seg_cnt);
3441
			lpfc_cmd->seg_cnt = 0;
3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459
			scsi_dma_unmap(scsi_cmnd);
			return 1;
		}

		/*
		 * The driver established a maximum scatter-gather segment count
		 * during probe that limits the number of sg elements in any
		 * single scsi command.  Just run through the seg_cnt and format
		 * the sge's.
		 * When using SLI-3 the driver will try to fit all the BDEs into
		 * the IOCB. If it can't then the BDEs get added to a BPL as it
		 * does for SLI-2 mode.
		 */
		scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
			physaddr = sg_dma_address(sgel);
			dma_len = sg_dma_len(sgel);
			sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
			sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
3460
			sgl->word2 = le32_to_cpu(sgl->word2);
3461 3462 3463 3464 3465
			if ((num_bde + 1) == nseg)
				bf_set(lpfc_sli4_sge_last, sgl, 1);
			else
				bf_set(lpfc_sli4_sge_last, sgl, 0);
			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
3466
			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
3467
			sgl->word2 = cpu_to_le32(sgl->word2);
3468
			sgl->sge_len = cpu_to_le32(dma_len);
3469 3470 3471
			dma_offset += dma_len;
			sgl++;
		}
3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482
		/* setup the performance hint (first data BDE) if enabled */
		if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
			bde = (struct ulp_bde64 *)
					&(iocb_cmd->unsli3.sli3Words[5]);
			bde->addrLow = first_data_sgl->addr_lo;
			bde->addrHigh = first_data_sgl->addr_hi;
			bde->tus.f.bdeSize =
					le32_to_cpu(first_data_sgl->sge_len);
			bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
			bde->tus.w = cpu_to_le32(bde->tus.w);
		}
3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506
	} else {
		sgl += 1;
		/* clear the last flag in the fcp_rsp map entry */
		sgl->word2 = le32_to_cpu(sgl->word2);
		bf_set(lpfc_sli4_sge_last, sgl, 1);
		sgl->word2 = cpu_to_le32(sgl->word2);
	}

	/*
	 * Finish initializing those IOCB fields that are dependent on the
	 * scsi_cmnd request_buffer.  Note that for SLI-2 the bdeSize is
	 * explicitly reinitialized.
	 * all iocb memory resources are reused.
	 */
	fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));

	/*
	 * Due to difference in data length between DIF/non-DIF paths,
	 * we need to set word 4 of IOCB here
	 */
	iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
	return 0;
}

3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523
/**
 * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This is the protection/DIF aware version of
 * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
 * two functions eventually, but for now, it's here
 **/
static int
lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
		struct lpfc_scsi_buf *lpfc_cmd)
{
	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
	struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
3524
	uint32_t num_sge = 0;
3525 3526 3527 3528 3529 3530
	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
	int prot_group_type = 0;
	int fcpdl;

	/*
	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
3531
	 *  fcp_rsp regions to the first data sge entry
3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553
	 */
	if (scsi_sg_count(scsi_cmnd)) {
		/*
		 * The driver stores the segment count returned from pci_map_sg
		 * because this a count of dma-mappings used to map the use_sg
		 * pages.  They are not guaranteed to be the same for those
		 * architectures that implement an IOMMU.
		 */
		datasegcnt = dma_map_sg(&phba->pcidev->dev,
					scsi_sglist(scsi_cmnd),
					scsi_sg_count(scsi_cmnd), datadir);
		if (unlikely(!datasegcnt))
			return 1;

		sgl += 1;
		/* clear the last flag in the fcp_rsp map entry */
		sgl->word2 = le32_to_cpu(sgl->word2);
		bf_set(lpfc_sli4_sge_last, sgl, 0);
		sgl->word2 = cpu_to_le32(sgl->word2);

		sgl += 1;
		lpfc_cmd->seg_cnt = datasegcnt;
3554 3555 3556 3557

		/* First check if data segment count from SCSI Layer is good */
		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt)
			goto err;
3558 3559 3560 3561 3562

		prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);

		switch (prot_group_type) {
		case LPFC_PG_TYPE_NO_DIF:
3563 3564 3565 3566 3567
			/* Here we need to add a DISEED to the count */
			if ((lpfc_cmd->seg_cnt + 1) > phba->cfg_total_seg_cnt)
				goto err;

			num_sge = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
3568
					datasegcnt);
3569

3570
			/* we should have 2 or more entries in buffer list */
3571
			if (num_sge < 2)
3572 3573
				goto err;
			break;
3574 3575

		case LPFC_PG_TYPE_DIF_BUF:
3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589
			/*
			 * This type indicates that protection buffers are
			 * passed to the driver, so that needs to be prepared
			 * for DMA
			 */
			protsegcnt = dma_map_sg(&phba->pcidev->dev,
					scsi_prot_sglist(scsi_cmnd),
					scsi_prot_sg_count(scsi_cmnd), datadir);
			if (unlikely(!protsegcnt)) {
				scsi_dma_unmap(scsi_cmnd);
				return 1;
			}

			lpfc_cmd->prot_seg_cnt = protsegcnt;
3590 3591 3592 3593 3594 3595 3596
			/*
			 * There is a minimun of 3 SGEs used for every
			 * protection data segment.
			 */
			if ((lpfc_cmd->prot_seg_cnt * 3) >
			    (phba->cfg_total_seg_cnt - 2))
				goto err;
3597

3598
			num_sge = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
3599
					datasegcnt, protsegcnt);
3600

3601
			/* we should have 3 or more entries in buffer list */
3602 3603
			if ((num_sge < 3) ||
			    (num_sge > phba->cfg_total_seg_cnt))
3604 3605
				goto err;
			break;
3606

3607 3608
		case LPFC_PG_TYPE_INVALID:
		default:
3609 3610 3611
			scsi_dma_unmap(scsi_cmnd);
			lpfc_cmd->seg_cnt = 0;

3612 3613 3614 3615 3616 3617 3618
			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
					"9083 Unexpected protection group %i\n",
					prot_group_type);
			return 1;
		}
	}

3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633
	switch (scsi_get_prot_op(scsi_cmnd)) {
	case SCSI_PROT_WRITE_STRIP:
	case SCSI_PROT_READ_STRIP:
		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_STRIP;
		break;
	case SCSI_PROT_WRITE_INSERT:
	case SCSI_PROT_READ_INSERT:
		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_INSERT;
		break;
	case SCSI_PROT_WRITE_PASS:
	case SCSI_PROT_READ_PASS:
		lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF_PASS;
		break;
	}

3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644
	fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
	fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);

	/*
	 * Due to difference in data length between DIF/non-DIF paths,
	 * we need to set word 4 of IOCB here
	 */
	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;

	return 0;
err:
3645 3646 3647 3648 3649 3650 3651
	if (lpfc_cmd->seg_cnt)
		scsi_dma_unmap(scsi_cmnd);
	if (lpfc_cmd->prot_seg_cnt)
		dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(scsi_cmnd),
			     scsi_prot_sg_count(scsi_cmnd),
			     scsi_cmnd->sc_data_direction);

3652
	lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
3653 3654 3655 3656 3657 3658 3659 3660
			"9084 Cannot setup S/G List for HBA"
			"IO segs %d/%d SGL %d SCSI %d: %d %d\n",
			lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
			phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
			prot_group_type, num_sge);

	lpfc_cmd->seg_cnt = 0;
	lpfc_cmd->prot_seg_cnt = 0;
3661 3662 3663
	return 1;
}

3664 3665 3666 3667 3668 3669 3670 3671 3672
/**
 * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine wraps the actual DMA mapping function pointer from the
 * lpfc_hba struct.
 *
 * Return codes:
3673 3674
 *	1 - Error
 *	0 - Success
3675 3676 3677 3678 3679 3680 3681
 **/
static inline int
lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
	return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
}

3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700
/**
 * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
 * using BlockGuard.
 * @phba: The Hba for which this call is being executed.
 * @lpfc_cmd: The scsi buffer which is going to be mapped.
 *
 * This routine wraps the actual DMA mapping function pointer from the
 * lpfc_hba struct.
 *
 * Return codes:
 *	1 - Error
 *	0 - Success
 **/
static inline int
lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
	return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
}

3701
/**
3702
 * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722
 * @phba: Pointer to hba context object.
 * @vport: Pointer to vport object.
 * @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
 * @rsp_iocb: Pointer to response iocb object which reported error.
 *
 * This function posts an event when there is a SCSI command reporting
 * error from the scsi device.
 **/
static void
lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
		struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_iocbq *rsp_iocb) {
	struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
	struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
	uint32_t resp_info = fcprsp->rspStatus2;
	uint32_t scsi_status = fcprsp->rspStatus3;
	uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
	struct lpfc_fast_path_event *fast_path_evt = NULL;
	struct lpfc_nodelist *pnode = lpfc_cmd->rdata->pnode;
	unsigned long flags;

3723 3724 3725
	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
		return;

3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794
	/* If there is queuefull or busy condition send a scsi event */
	if ((cmnd->result == SAM_STAT_TASK_SET_FULL) ||
		(cmnd->result == SAM_STAT_BUSY)) {
		fast_path_evt = lpfc_alloc_fast_evt(phba);
		if (!fast_path_evt)
			return;
		fast_path_evt->un.scsi_evt.event_type =
			FC_REG_SCSI_EVENT;
		fast_path_evt->un.scsi_evt.subcategory =
		(cmnd->result == SAM_STAT_TASK_SET_FULL) ?
		LPFC_EVENT_QFULL : LPFC_EVENT_DEVBSY;
		fast_path_evt->un.scsi_evt.lun = cmnd->device->lun;
		memcpy(&fast_path_evt->un.scsi_evt.wwpn,
			&pnode->nlp_portname, sizeof(struct lpfc_name));
		memcpy(&fast_path_evt->un.scsi_evt.wwnn,
			&pnode->nlp_nodename, sizeof(struct lpfc_name));
	} else if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen &&
		((cmnd->cmnd[0] == READ_10) || (cmnd->cmnd[0] == WRITE_10))) {
		fast_path_evt = lpfc_alloc_fast_evt(phba);
		if (!fast_path_evt)
			return;
		fast_path_evt->un.check_cond_evt.scsi_event.event_type =
			FC_REG_SCSI_EVENT;
		fast_path_evt->un.check_cond_evt.scsi_event.subcategory =
			LPFC_EVENT_CHECK_COND;
		fast_path_evt->un.check_cond_evt.scsi_event.lun =
			cmnd->device->lun;
		memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwpn,
			&pnode->nlp_portname, sizeof(struct lpfc_name));
		memcpy(&fast_path_evt->un.check_cond_evt.scsi_event.wwnn,
			&pnode->nlp_nodename, sizeof(struct lpfc_name));
		fast_path_evt->un.check_cond_evt.sense_key =
			cmnd->sense_buffer[2] & 0xf;
		fast_path_evt->un.check_cond_evt.asc = cmnd->sense_buffer[12];
		fast_path_evt->un.check_cond_evt.ascq = cmnd->sense_buffer[13];
	} else if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
		     fcpi_parm &&
		     ((be32_to_cpu(fcprsp->rspResId) != fcpi_parm) ||
			((scsi_status == SAM_STAT_GOOD) &&
			!(resp_info & (RESID_UNDER | RESID_OVER))))) {
		/*
		 * If status is good or resid does not match with fcp_param and
		 * there is valid fcpi_parm, then there is a read_check error
		 */
		fast_path_evt = lpfc_alloc_fast_evt(phba);
		if (!fast_path_evt)
			return;
		fast_path_evt->un.read_check_error.header.event_type =
			FC_REG_FABRIC_EVENT;
		fast_path_evt->un.read_check_error.header.subcategory =
			LPFC_EVENT_FCPRDCHKERR;
		memcpy(&fast_path_evt->un.read_check_error.header.wwpn,
			&pnode->nlp_portname, sizeof(struct lpfc_name));
		memcpy(&fast_path_evt->un.read_check_error.header.wwnn,
			&pnode->nlp_nodename, sizeof(struct lpfc_name));
		fast_path_evt->un.read_check_error.lun = cmnd->device->lun;
		fast_path_evt->un.read_check_error.opcode = cmnd->cmnd[0];
		fast_path_evt->un.read_check_error.fcpiparam =
			fcpi_parm;
	} else
		return;

	fast_path_evt->vport = vport;
	spin_lock_irqsave(&phba->hbalock, flags);
	list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
	spin_unlock_irqrestore(&phba->hbalock, flags);
	lpfc_worker_wake_up(phba);
	return;
}
3795 3796

/**
3797
 * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
3798
 * @phba: The HBA for which this call is being executed.
3799 3800 3801
 * @psb: The scsi buffer which is going to be un-mapped.
 *
 * This routine does DMA un-mapping of scatter gather list of scsi command
3802
 * field of @lpfc_cmd for device with SLI-3 interface spec.
3803
 **/
3804
static void
3805
lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
3806 3807 3808 3809 3810 3811 3812
{
	/*
	 * There are only two special cases to consider.  (1) the scsi command
	 * requested scatter-gather usage or (2) the scsi command allocated
	 * a request buffer, but did not request use_sg.  There is a third
	 * case, but it does not require resource deallocation.
	 */
3813 3814
	if (psb->seg_cnt > 0)
		scsi_dma_unmap(psb->pCmd);
3815 3816 3817 3818
	if (psb->prot_seg_cnt > 0)
		dma_unmap_sg(&phba->pcidev->dev, scsi_prot_sglist(psb->pCmd),
				scsi_prot_sg_count(psb->pCmd),
				psb->pCmd->sc_data_direction);
3819 3820
}

3821
/**
3822
 * lpfc_handler_fcp_err - FCP response handler
3823 3824 3825 3826 3827 3828 3829 3830
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
 * @rsp_iocb: The response IOCB which contains FCP error.
 *
 * This routine is called to process response IOCB with status field
 * IOSTAT_FCP_RSP_ERROR. This routine sets result field of scsi command
 * based upon SCSI and FCP error.
 **/
已提交
3831
static void
J
James Smart 已提交
3832 3833
lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
		    struct lpfc_iocbq *rsp_iocb)
已提交
3834 3835 3836 3837
{
	struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
	struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
	struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
3838
	uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
已提交
3839 3840
	uint32_t resp_info = fcprsp->rspStatus2;
	uint32_t scsi_status = fcprsp->rspStatus3;
3841
	uint32_t *lp;
已提交
3842 3843
	uint32_t host_status = DID_OK;
	uint32_t rsplen = 0;
3844
	uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
已提交
3845

3846

已提交
3847 3848 3849 3850 3851 3852 3853 3854 3855 3856
	/*
	 *  If this is a task management command, there is no
	 *  scsi packet associated with this lpfc_cmd.  The driver
	 *  consumes it.
	 */
	if (fcpcmd->fcpCntl2) {
		scsi_status = 0;
		goto out;
	}

3857 3858
	if (resp_info & RSP_LEN_VALID) {
		rsplen = be32_to_cpu(fcprsp->rspRspLen);
3859
		if (rsplen != 0 && rsplen != 4 && rsplen != 8) {
3860 3861 3862 3863 3864 3865 3866 3867 3868
			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
				 "2719 Invalid response length: "
				 "tgt x%x lun x%x cmnd x%x rsplen x%x\n",
				 cmnd->device->id,
				 cmnd->device->lun, cmnd->cmnd[0],
				 rsplen);
			host_status = DID_ERROR;
			goto out;
		}
3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879
		if (fcprsp->rspInfo3 != RSP_NO_FAILURE) {
			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
				 "2757 Protocol failure detected during "
				 "processing of FCP I/O op: "
				 "tgt x%x lun x%x cmnd x%x rspInfo3 x%x\n",
				 cmnd->device->id,
				 cmnd->device->lun, cmnd->cmnd[0],
				 fcprsp->rspInfo3);
			host_status = DID_ERROR;
			goto out;
		}
3880 3881
	}

3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892
	if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
		uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
		if (snslen > SCSI_SENSE_BUFFERSIZE)
			snslen = SCSI_SENSE_BUFFERSIZE;

		if (resp_info & RSP_LEN_VALID)
		  rsplen = be32_to_cpu(fcprsp->rspRspLen);
		memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
	}
	lp = (uint32_t *)cmnd->sense_buffer;

3893 3894 3895 3896 3897 3898 3899 3900 3901
	/* special handling for under run conditions */
	if (!scsi_status && (resp_info & RESID_UNDER)) {
		/* don't log under runs if fcp set... */
		if (vport->cfg_log_verbose & LOG_FCP)
			logit = LOG_FCP_ERROR;
		/* unless operator says so */
		if (vport->cfg_log_verbose & LOG_FCP_UNDER)
			logit = LOG_FCP_UNDER;
	}
3902

3903
	lpfc_printf_vlog(vport, KERN_WARNING, logit,
3904
			 "9024 FCP command x%x failed: x%x SNS x%x x%x "
3905 3906 3907 3908 3909 3910 3911
			 "Data: x%x x%x x%x x%x x%x\n",
			 cmnd->cmnd[0], scsi_status,
			 be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
			 be32_to_cpu(fcprsp->rspResId),
			 be32_to_cpu(fcprsp->rspSnsLen),
			 be32_to_cpu(fcprsp->rspRspLen),
			 fcprsp->rspInfo3);
已提交
3912

3913
	scsi_set_resid(cmnd, 0);
已提交
3914
	if (resp_info & RESID_UNDER) {
3915
		scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
已提交
3916

3917
		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP_UNDER,
3918
				 "9025 FCP Read Underrun, expected %d, "
3919 3920 3921 3922
				 "residual %d Data: x%x x%x x%x\n",
				 be32_to_cpu(fcpcmd->fcpDl),
				 scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
				 cmnd->underflow);
已提交
3923

3924 3925 3926 3927 3928 3929 3930
		/*
		 * If there is an under run check if under run reported by
		 * storage array is same as the under run reported by HBA.
		 * If this is not same, there is a dropped frame.
		 */
		if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
			fcpi_parm &&
3931
			(scsi_get_resid(cmnd) != fcpi_parm)) {
3932 3933
			lpfc_printf_vlog(vport, KERN_WARNING,
					 LOG_FCP | LOG_FCP_ERROR,
3934
					 "9026 FCP Read Check Error "
3935 3936 3937 3938
					 "and Underrun Data: x%x x%x x%x x%x\n",
					 be32_to_cpu(fcpcmd->fcpDl),
					 scsi_get_resid(cmnd), fcpi_parm,
					 cmnd->cmnd[0]);
3939
			scsi_set_resid(cmnd, scsi_bufflen(cmnd));
3940 3941
			host_status = DID_ERROR;
		}
已提交
3942 3943
		/*
		 * The cmnd->underflow is the minimum number of bytes that must
L
Lucas De Marchi 已提交
3944
		 * be transferred for this command.  Provided a sense condition
已提交
3945 3946 3947 3948 3949
		 * is not present, make sure the actual amount transferred is at
		 * least the underflow value or fail.
		 */
		if (!(resp_info & SNS_LEN_VALID) &&
		    (scsi_status == SAM_STAT_GOOD) &&
3950 3951
		    (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
		     < cmnd->underflow)) {
3952
			lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
3953
					 "9027 FCP command x%x residual "
3954 3955
					 "underrun converted to error "
					 "Data: x%x x%x x%x\n",
3956
					 cmnd->cmnd[0], scsi_bufflen(cmnd),
3957
					 scsi_get_resid(cmnd), cmnd->underflow);
已提交
3958 3959 3960
			host_status = DID_ERROR;
		}
	} else if (resp_info & RESID_OVER) {
3961
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
3962
				 "9028 FCP command x%x residual overrun error. "
3963
				 "Data: x%x x%x\n", cmnd->cmnd[0],
3964
				 scsi_bufflen(cmnd), scsi_get_resid(cmnd));
已提交
3965 3966 3967 3968
		host_status = DID_ERROR;

	/*
	 * Check SLI validation that all the transfer was actually done
3969
	 * (fcpi_parm should be zero).
已提交
3970
	 */
3971
	} else if (fcpi_parm) {
3972
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
3973
				 "9029 FCP Data Transfer Check Error: "
J
James Smart 已提交
3974
				 "x%x x%x x%x x%x x%x\n",
3975 3976
				 be32_to_cpu(fcpcmd->fcpDl),
				 be32_to_cpu(fcprsp->rspResId),
J
James Smart 已提交
3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988
				 fcpi_parm, cmnd->cmnd[0], scsi_status);
		switch (scsi_status) {
		case SAM_STAT_GOOD:
		case SAM_STAT_CHECK_CONDITION:
			/* Fabric dropped a data frame. Fail any successful
			 * command in which we detected dropped frames.
			 * A status of good or some check conditions could
			 * be considered a successful command.
			 */
			host_status = DID_ERROR;
			break;
		}
3989
		scsi_set_resid(cmnd, scsi_bufflen(cmnd));
已提交
3990 3991 3992 3993
	}

 out:
	cmnd->result = ScsiResult(host_status, scsi_status);
3994
	lpfc_send_scsi_error_event(vport->phba, vport, lpfc_cmd, rsp_iocb);
已提交
3995 3996
}

3997
/**
3998
 * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
3999 4000
 * @phba: The Hba for which this call is being executed.
 * @pIocbIn: The command IOCBQ for the scsi cmnd.
4001
 * @pIocbOut: The response IOCBQ for the scsi cmnd.
4002 4003 4004 4005 4006
 *
 * This routine assigns scsi command result by looking into response IOCB
 * status field appropriately. This routine handles QUEUE FULL condition as
 * well by ramping down device queue depth.
 **/
已提交
4007 4008 4009 4010 4011 4012
static void
lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
			struct lpfc_iocbq *pIocbOut)
{
	struct lpfc_scsi_buf *lpfc_cmd =
		(struct lpfc_scsi_buf *) pIocbIn->context1;
J
James Smart 已提交
4013
	struct lpfc_vport      *vport = pIocbIn->vport;
已提交
4014 4015
	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
	struct lpfc_nodelist *pnode = rdata->pnode;
4016
	struct scsi_cmnd *cmd;
4017
	int result;
4018
	struct scsi_device *tmp_sdev;
4019
	int depth;
4020
	unsigned long flags;
4021
	struct lpfc_fast_path_event *fast_path_evt;
4022
	struct Scsi_Host *shost;
4023
	uint32_t queue_depth, scsi_id;
4024
	uint32_t logit = LOG_FCP;
已提交
4025

4026 4027 4028 4029 4030 4031
	/* Sanity check on return of outstanding command */
	if (!(lpfc_cmd->pCmd))
		return;
	cmd = lpfc_cmd->pCmd;
	shost = cmd->device->host;

4032
	lpfc_cmd->result = (pIocbOut->iocb.un.ulpWord[4] & IOERR_PARAM_MASK);
已提交
4033
	lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
4034 4035 4036
	/* pick up SLI4 exhange busy status from HBA */
	lpfc_cmd->exch_busy = pIocbOut->iocb_flag & LPFC_EXCHANGE_BUSY;

4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
	if (lpfc_cmd->prot_data_type) {
		struct scsi_dif_tuple *src = NULL;

		src =  (struct scsi_dif_tuple *)lpfc_cmd->prot_data_segment;
		/*
		 * Used to restore any changes to protection
		 * data for error injection.
		 */
		switch (lpfc_cmd->prot_data_type) {
		case LPFC_INJERR_REFTAG:
			src->ref_tag =
				lpfc_cmd->prot_data;
			break;
		case LPFC_INJERR_APPTAG:
			src->app_tag =
				(uint16_t)lpfc_cmd->prot_data;
			break;
		case LPFC_INJERR_GUARD:
			src->guard_tag =
				(uint16_t)lpfc_cmd->prot_data;
			break;
		default:
			break;
		}

		lpfc_cmd->prot_data = 0;
		lpfc_cmd->prot_data_type = 0;
		lpfc_cmd->prot_data_segment = NULL;
	}
#endif
4068 4069
	if (pnode && NLP_CHK_NODE_ACT(pnode))
		atomic_dec(&pnode->cmd_pending);
已提交
4070 4071 4072 4073 4074 4075 4076

	if (lpfc_cmd->status) {
		if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
		    (lpfc_cmd->result & IOERR_DRVR_MASK))
			lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
		else if (lpfc_cmd->status >= IOSTAT_CNT)
			lpfc_cmd->status = IOSTAT_DEFAULT;
4077 4078 4079 4080
		if (lpfc_cmd->status == IOSTAT_FCP_RSP_ERROR &&
		    !lpfc_cmd->fcp_rsp->rspStatus3 &&
		    (lpfc_cmd->fcp_rsp->rspStatus2 & RESID_UNDER) &&
		    !(vport->cfg_log_verbose & LOG_FCP_UNDER))
4081 4082 4083 4084 4085
			logit = 0;
		else
			logit = LOG_FCP | LOG_FCP_UNDER;
		lpfc_printf_vlog(vport, KERN_WARNING, logit,
			 "9030 FCP cmd x%x failed <%d/%d> "
4086 4087 4088
			 "status: x%x result: x%x "
			 "sid: x%x did: x%x oxid: x%x "
			 "Data: x%x x%x\n",
4089 4090 4091 4092
			 cmd->cmnd[0],
			 cmd->device ? cmd->device->id : 0xffff,
			 cmd->device ? cmd->device->lun : 0xffff,
			 lpfc_cmd->status, lpfc_cmd->result,
4093 4094
			 vport->fc_myDID,
			 (pnode) ? pnode->nlp_DID : 0,
4095 4096
			 phba->sli_rev == LPFC_SLI_REV4 ?
			     lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff,
4097 4098
			 pIocbOut->iocb.ulpContext,
			 lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
已提交
4099 4100 4101 4102

		switch (lpfc_cmd->status) {
		case IOSTAT_FCP_RSP_ERROR:
			/* Call FCP RSP handler to determine result */
J
James Smart 已提交
4103
			lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
已提交
4104 4105 4106
			break;
		case IOSTAT_NPORT_BSY:
		case IOSTAT_FABRIC_BSY:
4107
			cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131
			fast_path_evt = lpfc_alloc_fast_evt(phba);
			if (!fast_path_evt)
				break;
			fast_path_evt->un.fabric_evt.event_type =
				FC_REG_FABRIC_EVENT;
			fast_path_evt->un.fabric_evt.subcategory =
				(lpfc_cmd->status == IOSTAT_NPORT_BSY) ?
				LPFC_EVENT_PORT_BUSY : LPFC_EVENT_FABRIC_BUSY;
			if (pnode && NLP_CHK_NODE_ACT(pnode)) {
				memcpy(&fast_path_evt->un.fabric_evt.wwpn,
					&pnode->nlp_portname,
					sizeof(struct lpfc_name));
				memcpy(&fast_path_evt->un.fabric_evt.wwnn,
					&pnode->nlp_nodename,
					sizeof(struct lpfc_name));
			}
			fast_path_evt->vport = vport;
			fast_path_evt->work_evt.evt =
				LPFC_EVT_FASTPATH_MGMT_EVT;
			spin_lock_irqsave(&phba->hbalock, flags);
			list_add_tail(&fast_path_evt->work_evt.evt_listp,
				&phba->work_list);
			spin_unlock_irqrestore(&phba->hbalock, flags);
			lpfc_worker_wake_up(phba);
已提交
4132
			break;
4133
		case IOSTAT_LOCAL_REJECT:
4134
		case IOSTAT_REMOTE_STOP:
4135 4136 4137 4138 4139 4140 4141 4142 4143
			if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
			    lpfc_cmd->result ==
					IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
			    lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
			    lpfc_cmd->result ==
					IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
				cmd->result = ScsiResult(DID_NO_CONNECT, 0);
				break;
			}
4144
			if (lpfc_cmd->result == IOERR_INVALID_RPI ||
4145
			    lpfc_cmd->result == IOERR_NO_RESOURCES ||
4146 4147
			    lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
			    lpfc_cmd->result == IOERR_SLER_CMD_RCV_FAILURE) {
4148
				cmd->result = ScsiResult(DID_REQUEUE, 0);
4149
				break;
4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165
			}
			if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
			     lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
			     pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
				if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
					/*
					 * This is a response for a BG enabled
					 * cmd. Parse BG error
					 */
					lpfc_parse_bg_err(phba, lpfc_cmd,
							pIocbOut);
					break;
				} else {
					lpfc_printf_vlog(vport, KERN_WARNING,
							LOG_BG,
							"9031 non-zero BGSTAT "
4166
							"on unprotected cmd\n");
4167 4168
				}
			}
4169 4170 4171 4172 4173 4174 4175 4176
			if ((lpfc_cmd->status == IOSTAT_REMOTE_STOP)
				&& (phba->sli_rev == LPFC_SLI_REV4)
				&& (pnode && NLP_CHK_NODE_ACT(pnode))) {
				/* This IO was aborted by the target, we don't
				 * know the rxid and because we did not send the
				 * ABTS we cannot generate and RRQ.
				 */
				lpfc_set_rrq_active(phba, pnode,
4177 4178
					lpfc_cmd->cur_iocbq.sli4_lxritag,
					0, 0);
4179
			}
4180
		/* else: fall through */
已提交
4181 4182 4183 4184 4185
		default:
			cmd->result = ScsiResult(DID_ERROR, 0);
			break;
		}

4186
		if (!pnode || !NLP_CHK_NODE_ACT(pnode)
4187
		    || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
4188 4189
			cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
						 SAM_STAT_BUSY);
4190
	} else
已提交
4191 4192 4193 4194 4195
		cmd->result = ScsiResult(DID_OK, 0);

	if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
		uint32_t *lp = (uint32_t *)cmd->sense_buffer;

4196 4197 4198 4199 4200 4201
		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
				 "0710 Iodone <%d/%d> cmd %p, error "
				 "x%x SNS x%x x%x Data: x%x x%x\n",
				 cmd->device->id, cmd->device->lun, cmd,
				 cmd->result, *lp, *(lp + 3), cmd->retries,
				 scsi_get_resid(cmd));
已提交
4202 4203
	}

4204
	lpfc_update_stats(phba, lpfc_cmd);
4205
	result = cmd->result;
4206 4207 4208
	if (vport->cfg_max_scsicmpl_time &&
	   time_after(jiffies, lpfc_cmd->start_time +
		msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
4209
		spin_lock_irqsave(shost->host_lock, flags);
4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221
		if (pnode && NLP_CHK_NODE_ACT(pnode)) {
			if (pnode->cmd_qdepth >
				atomic_read(&pnode->cmd_pending) &&
				(atomic_read(&pnode->cmd_pending) >
				LPFC_MIN_TGT_QDEPTH) &&
				((cmd->cmnd[0] == READ_10) ||
				(cmd->cmnd[0] == WRITE_10)))
				pnode->cmd_qdepth =
					atomic_read(&pnode->cmd_pending);

			pnode->last_change_time = jiffies;
		}
4222
		spin_unlock_irqrestore(shost->host_lock, flags);
4223
	} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
4224
		if ((pnode->cmd_qdepth < vport->cfg_tgt_queue_depth) &&
4225
		   time_after(jiffies, pnode->last_change_time +
4226
			      msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
4227
			spin_lock_irqsave(shost->host_lock, flags);
4228 4229 4230 4231 4232 4233
			depth = pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT
				/ 100;
			depth = depth ? depth : 1;
			pnode->cmd_qdepth += depth;
			if (pnode->cmd_qdepth > vport->cfg_tgt_queue_depth)
				pnode->cmd_qdepth = vport->cfg_tgt_queue_depth;
4234
			pnode->last_change_time = jiffies;
4235
			spin_unlock_irqrestore(shost->host_lock, flags);
4236
		}
4237 4238
	}

4239
	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4240 4241 4242 4243

	/* The sdev is not guaranteed to be valid post scsi_done upcall. */
	queue_depth = cmd->device->queue_depth;
	scsi_id = cmd->device->id;
4244 4245
	cmd->scsi_done(cmd);

4246
	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4247
		spin_lock_irqsave(&phba->hbalock, flags);
4248
		lpfc_cmd->pCmd = NULL;
4249
		spin_unlock_irqrestore(&phba->hbalock, flags);
4250

4251 4252 4253 4254
		/*
		 * If there is a thread waiting for command completion
		 * wake up the thread.
		 */
4255
		spin_lock_irqsave(shost->host_lock, flags);
4256 4257
		if (lpfc_cmd->waitq)
			wake_up(lpfc_cmd->waitq);
4258
		spin_unlock_irqrestore(shost->host_lock, flags);
4259 4260 4261 4262
		lpfc_release_scsi_buf(phba, lpfc_cmd);
		return;
	}

4263
	if (!result)
4264
		lpfc_rampup_queue_depth(vport, queue_depth);
4265

4266 4267 4268 4269
	/*
	 * Check for queue full.  If the lun is reporting queue full, then
	 * back off the lun queue depth to prevent target overloads.
	 */
4270 4271
	if (result == SAM_STAT_TASK_SET_FULL && pnode &&
	    NLP_CHK_NODE_ACT(pnode)) {
4272 4273
		shost_for_each_device(tmp_sdev, shost) {
			if (tmp_sdev->id != scsi_id)
4274 4275
				continue;
			depth = scsi_track_queue_full(tmp_sdev,
4276 4277 4278
						      tmp_sdev->queue_depth-1);
			if (depth <= 0)
				continue;
4279 4280 4281
			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
					 "0711 detected queue full - lun queue "
					 "depth adjusted to %d.\n", depth);
4282
			lpfc_send_sdev_queuedepth_change_event(phba, vport,
4283 4284 4285
							       pnode,
							       tmp_sdev->lun,
							       depth+1, depth);
4286 4287 4288
		}
	}

4289
	spin_lock_irqsave(&phba->hbalock, flags);
4290
	lpfc_cmd->pCmd = NULL;
4291
	spin_unlock_irqrestore(&phba->hbalock, flags);
4292

4293 4294 4295 4296
	/*
	 * If there is a thread waiting for command completion
	 * wake up the thread.
	 */
4297
	spin_lock_irqsave(shost->host_lock, flags);
4298 4299
	if (lpfc_cmd->waitq)
		wake_up(lpfc_cmd->waitq);
4300
	spin_unlock_irqrestore(shost->host_lock, flags);
4301

4302
	lpfc_release_scsi_buf(phba, lpfc_cmd);
已提交
4303 4304
}

4305
/**
4306
 * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322
 * @data: A pointer to the immediate command data portion of the IOCB.
 * @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
 *
 * The routine copies the entire FCP command from @fcp_cmnd to @data while
 * byte swapping the data to big endian format for transmission on the wire.
 **/
static void
lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
{
	int i, j;
	for (i = 0, j = 0; i < sizeof(struct fcp_cmnd);
	     i += sizeof(uint32_t), j++) {
		((uint32_t *)data)[j] = cpu_to_be32(((uint32_t *)fcp_cmnd)[j]);
	}
}

4323
/**
4324
 * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
4325 4326 4327 4328 4329
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: The scsi command which needs to send.
 * @pnode: Pointer to lpfc_nodelist.
 *
 * This routine initializes fcp_cmnd and iocb data structure from scsi command
4330
 * to transfer for device with SLI3 interface spec.
4331
 **/
已提交
4332
static void
4333
lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
J
James Smart 已提交
4334
		    struct lpfc_nodelist *pnode)
已提交
4335
{
J
James Smart 已提交
4336
	struct lpfc_hba *phba = vport->phba;
已提交
4337 4338 4339 4340 4341
	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
	struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
	int datadir = scsi_cmnd->sc_data_direction;
4342
	char tag[2];
4343 4344
	uint8_t *ptr;
	bool sli4;
已提交
4345

4346 4347 4348
	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
		return;

已提交
4349
	lpfc_cmd->fcp_rsp->rspSnsLen = 0;
4350 4351
	/* clear task management bits */
	lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
已提交
4352

4353 4354
	int_to_scsilun(lpfc_cmd->pCmd->device->lun,
			&lpfc_cmd->fcp_cmnd->fcp_lun);
已提交
4355

4356 4357 4358 4359 4360 4361 4362
	ptr = &fcp_cmnd->fcpCdb[0];
	memcpy(ptr, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
	if (scsi_cmnd->cmd_len < LPFC_FCP_CDB_LEN) {
		ptr += scsi_cmnd->cmd_len;
		memset(ptr, 0, (LPFC_FCP_CDB_LEN - scsi_cmnd->cmd_len));
	}

4363 4364
	if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
		switch (tag[0]) {
已提交
4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375
		case HEAD_OF_QUEUE_TAG:
			fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
			break;
		case ORDERED_QUEUE_TAG:
			fcp_cmnd->fcpCntl1 = ORDERED_Q;
			break;
		default:
			fcp_cmnd->fcpCntl1 = SIMPLE_Q;
			break;
		}
	} else
4376
		fcp_cmnd->fcpCntl1 = SIMPLE_Q;
已提交
4377

4378 4379
	sli4 = (phba->sli_rev == LPFC_SLI_REV4);

已提交
4380 4381 4382 4383 4384 4385
	/*
	 * There are three possibilities here - use scatter-gather segment, use
	 * the single mapping, or neither.  Start the lpfc command prep by
	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
	 * data bde entry.
	 */
4386
	if (scsi_sg_count(scsi_cmnd)) {
已提交
4387 4388
		if (datadir == DMA_TO_DEVICE) {
			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
4389 4390 4391
			if (sli4)
				iocb_cmd->ulpPU = PARM_READ_CHECK;
			else {
4392 4393
				iocb_cmd->un.fcpi.fcpi_parm = 0;
				iocb_cmd->ulpPU = 0;
4394
			}
已提交
4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409
			fcp_cmnd->fcpCntl3 = WRITE_DATA;
			phba->fc4OutputRequests++;
		} else {
			iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
			iocb_cmd->ulpPU = PARM_READ_CHECK;
			fcp_cmnd->fcpCntl3 = READ_DATA;
			phba->fc4InputRequests++;
		}
	} else {
		iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
		iocb_cmd->un.fcpi.fcpi_parm = 0;
		iocb_cmd->ulpPU = 0;
		fcp_cmnd->fcpCntl3 = 0;
		phba->fc4ControlRequests++;
	}
4410 4411
	if (phba->sli_rev == 3 &&
	    !(phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4412
		lpfc_fcpcmd_to_iocb(iocb_cmd->unsli3.fcp_ext.icd, fcp_cmnd);
已提交
4413 4414 4415 4416 4417
	/*
	 * Finish initializing those IOCB fields that are independent
	 * of the scsi_cmnd request_buffer
	 */
	piocbq->iocb.ulpContext = pnode->nlp_rpi;
4418
	if (sli4)
4419 4420
		piocbq->iocb.ulpContext =
		  phba->sli4_hba.rpi_ids[pnode->nlp_rpi];
已提交
4421 4422
	if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
		piocbq->iocb.ulpFCP2Rcvy = 1;
4423 4424
	else
		piocbq->iocb.ulpFCP2Rcvy = 0;
已提交
4425 4426 4427 4428 4429

	piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
	piocbq->context1  = lpfc_cmd;
	piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
	piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
J
James Smart 已提交
4430
	piocbq->vport = vport;
已提交
4431 4432
}

4433
/**
4434
 * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit
4435 4436 4437 4438 4439
 * @vport: The virtual port for which this call is being executed.
 * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
 * @lun: Logical unit number.
 * @task_mgmt_cmd: SCSI task management command.
 *
4440 4441
 * This routine creates FCP information unit corresponding to @task_mgmt_cmd
 * for device with SLI-3 interface spec.
4442 4443 4444 4445 4446
 *
 * Return codes:
 *   0 - Error
 *   1 - Success
 **/
已提交
4447
static int
4448
lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
已提交
4449
			     struct lpfc_scsi_buf *lpfc_cmd,
4450
			     unsigned int lun,
已提交
4451 4452 4453 4454 4455
			     uint8_t task_mgmt_cmd)
{
	struct lpfc_iocbq *piocbq;
	IOCB_t *piocb;
	struct fcp_cmnd *fcp_cmnd;
4456
	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
已提交
4457 4458
	struct lpfc_nodelist *ndlp = rdata->pnode;

4459 4460
	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) ||
	    ndlp->nlp_state != NLP_STE_MAPPED_NODE)
已提交
4461 4462 4463
		return 0;

	piocbq = &(lpfc_cmd->cur_iocbq);
J
James Smart 已提交
4464 4465
	piocbq->vport = vport;

已提交
4466 4467 4468
	piocb = &piocbq->iocb;

	fcp_cmnd = lpfc_cmd->fcp_cmnd;
4469 4470 4471
	/* Clear out any old data in the FCP command area */
	memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
	int_to_scsilun(lun, &fcp_cmnd->fcp_lun);
已提交
4472
	fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
4473 4474
	if (vport->phba->sli_rev == 3 &&
	    !(vport->phba->sli3_options & LPFC_SLI3_BG_ENABLED))
4475
		lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd);
已提交
4476 4477
	piocb->ulpCommand = CMD_FCP_ICMND64_CR;
	piocb->ulpContext = ndlp->nlp_rpi;
4478 4479 4480 4481
	if (vport->phba->sli_rev == LPFC_SLI_REV4) {
		piocb->ulpContext =
		  vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
	}
已提交
4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493
	if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
		piocb->ulpFCP2Rcvy = 1;
	}
	piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);

	/* ulpTimeout is only one byte */
	if (lpfc_cmd->timeout > 0xff) {
		/*
		 * Do not timeout the command at the firmware level.
		 * The driver will provide the timeout mechanism.
		 */
		piocb->ulpTimeout = 0;
4494
	} else
已提交
4495
		piocb->ulpTimeout = lpfc_cmd->timeout;
4496

4497 4498
	if (vport->phba->sli_rev == LPFC_SLI_REV4)
		lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
4499

4500
	return 1;
4501 4502 4503
}

/**
L
Lucas De Marchi 已提交
4504
 * lpfc_scsi_api_table_setup - Set up scsi api function jump table
4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515
 * @phba: The hba struct for which this call is being executed.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine sets up the SCSI interface API function jump table in @phba
 * struct.
 * Returns: 0 - success, -ENODEV - failure.
 **/
int
lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{

4516 4517 4518
	phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
	phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;

4519 4520 4521 4522
	switch (dev_grp) {
	case LPFC_PCI_DEV_LP:
		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
4523
		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
4524
		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
4525
		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
4526
		break;
4527 4528 4529
	case LPFC_PCI_DEV_OC:
		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
4530
		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
4531
		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
4532
		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
4533
		break;
4534 4535 4536 4537 4538 4539 4540 4541
	default:
		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
				"1418 Invalid HBA PCI-device group: 0x%x\n",
				dev_grp);
		return -ENODEV;
		break;
	}
	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
4542
	phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
4543 4544 4545
	return 0;
}

4546
/**
4547
 * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
4548 4549 4550 4551 4552 4553 4554
 * @phba: The Hba for which this call is being executed.
 * @cmdiocbq: Pointer to lpfc_iocbq data structure.
 * @rspiocbq: Pointer to lpfc_iocbq data structure.
 *
 * This routine is IOCB completion routine for device reset and target reset
 * routine. This routine release scsi buffer associated with lpfc_cmd.
 **/
4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566
static void
lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
			struct lpfc_iocbq *cmdiocbq,
			struct lpfc_iocbq *rspiocbq)
{
	struct lpfc_scsi_buf *lpfc_cmd =
		(struct lpfc_scsi_buf *) cmdiocbq->context1;
	if (lpfc_cmd)
		lpfc_release_scsi_buf(phba, lpfc_cmd);
	return;
}

4567
/**
4568
 * lpfc_info - Info entry point of scsi_host_template data structure
4569 4570 4571 4572 4573 4574 4575
 * @host: The scsi host for which this call is being executed.
 *
 * This routine provides module information about hba.
 *
 * Reutrn code:
 *   Pointer to char - Success.
 **/
已提交
4576 4577 4578
const char *
lpfc_info(struct Scsi_Host *host)
{
J
James Smart 已提交
4579 4580
	struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
	struct lpfc_hba   *phba = vport->phba;
4581
	int len, link_speed = 0;
已提交
4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600
	static char  lpfcinfobuf[384];

	memset(lpfcinfobuf,0,384);
	if (phba && phba->pcidev){
		strncpy(lpfcinfobuf, phba->ModelDesc, 256);
		len = strlen(lpfcinfobuf);
		snprintf(lpfcinfobuf + len,
			384-len,
			" on PCI bus %02x device %02x irq %d",
			phba->pcidev->bus->number,
			phba->pcidev->devfn,
			phba->pcidev->irq);
		len = strlen(lpfcinfobuf);
		if (phba->Port[0]) {
			snprintf(lpfcinfobuf + len,
				 384-len,
				 " port %s",
				 phba->Port);
		}
4601
		len = strlen(lpfcinfobuf);
4602 4603 4604 4605 4606 4607 4608 4609
		if (phba->sli_rev <= LPFC_SLI_REV3) {
			link_speed = lpfc_sli_port_speed_get(phba);
		} else {
			if (phba->sli4_hba.link_state.logical_speed)
				link_speed =
				      phba->sli4_hba.link_state.logical_speed;
			else
				link_speed = phba->sli4_hba.link_state.speed;
4610
		}
4611 4612 4613
		if (link_speed != 0)
			snprintf(lpfcinfobuf + len, 384-len,
				 " Logical Link Speed: %d Mbps", link_speed);
已提交
4614 4615 4616 4617
	}
	return lpfcinfobuf;
}

4618
/**
4619
 * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
4620 4621 4622 4623 4624
 * @phba: The Hba for which this call is being executed.
 *
 * This routine modifies fcp_poll_timer  field of @phba by cfg_poll_tmo.
 * The default value of cfg_poll_tmo is 10 milliseconds.
 **/
4625 4626 4627 4628 4629
static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
{
	unsigned long  poll_tmo_expires =
		(jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));

4630
	if (!list_empty(&phba->sli.ring[LPFC_FCP_RING].txcmplq))
4631 4632 4633 4634
		mod_timer(&phba->fcp_poll_timer,
			  poll_tmo_expires);
}

4635
/**
4636
 * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
4637 4638 4639 4640
 * @phba: The Hba for which this call is being executed.
 *
 * This routine starts the fcp_poll_timer of @phba.
 **/
4641 4642 4643 4644 4645
void lpfc_poll_start_timer(struct lpfc_hba * phba)
{
	lpfc_poll_rearm_timer(phba);
}

4646
/**
4647
 * lpfc_poll_timeout - Restart polling timer
4648 4649 4650 4651 4652 4653
 * @ptr: Map to lpfc_hba data structure pointer.
 *
 * This routine restarts fcp_poll timer, when FCP ring  polling is enable
 * and FCP Ring interrupt is disable.
 **/

4654 4655
void lpfc_poll_timeout(unsigned long ptr)
{
J
James Smart 已提交
4656
	struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
4657 4658

	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4659 4660 4661
		lpfc_sli_handle_fast_ring_event(phba,
			&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);

4662 4663 4664 4665 4666
		if (phba->cfg_poll & DISABLE_FCP_RING_INT)
			lpfc_poll_rearm_timer(phba);
	}
}

4667
/**
4668
 * lpfc_queuecommand - scsi_host_template queuecommand entry point
4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679
 * @cmnd: Pointer to scsi_cmnd data structure.
 * @done: Pointer to done routine.
 *
 * Driver registers this routine to scsi midlayer to submit a @cmd to process.
 * This routine prepares an IOCB from scsi command and provides to firmware.
 * The @done callback is invoked after driver finished processing the command.
 *
 * Return value :
 *   0 - Success
 *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
 **/
已提交
4680
static int
4681
lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
已提交
4682
{
J
James Smart 已提交
4683 4684
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
已提交
4685
	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
4686
	struct lpfc_nodelist *ndlp;
4687
	struct lpfc_scsi_buf *lpfc_cmd;
4688 4689
	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
	int err;
已提交
4690

4691 4692 4693
	err = fc_remote_port_chkready(rport);
	if (err) {
		cmnd->result = err;
已提交
4694 4695
		goto out_fail_command;
	}
4696
	ndlp = rdata->pnode;
已提交
4697

4698
	if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
4699
		(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
4700

4701 4702 4703 4704
		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
				"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
				" op:%02x str=%s without registering for"
				" BlockGuard - Rejecting command\n",
4705 4706 4707 4708 4709
				cmnd->cmnd[0], scsi_get_prot_op(cmnd),
				dif_op_str[scsi_get_prot_op(cmnd)]);
		goto out_fail_command;
	}

已提交
4710
	/*
4711 4712
	 * Catch race where our node has transitioned, but the
	 * transport is still transitioning.
已提交
4713
	 */
4714 4715
	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
		goto out_tgt_busy;
4716
	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
4717
		goto out_tgt_busy;
4718

4719
	lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
已提交
4720
	if (lpfc_cmd == NULL) {
4721
		lpfc_rampdown_queue_depth(phba);
4722

4723 4724 4725
		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
				 "0707 driver's buffer pool is empty, "
				 "IO busied\n");
已提交
4726 4727 4728 4729 4730 4731 4732 4733 4734 4735
		goto out_host_busy;
	}

	/*
	 * Store the midlayer's command structure for the completion phase
	 * and complete the command initialization.
	 */
	lpfc_cmd->pCmd  = cmnd;
	lpfc_cmd->rdata = rdata;
	lpfc_cmd->timeout = 0;
4736
	lpfc_cmd->start_time = jiffies;
已提交
4737 4738
	cmnd->host_scribble = (unsigned char *)lpfc_cmd;

4739
	if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
4740
		if (vport->phba->cfg_enable_bg) {
4741 4742
			lpfc_printf_vlog(vport,
					 KERN_INFO, LOG_SCSI_CMD,
4743 4744 4745 4746 4747 4748 4749
					 "9033 BLKGRD: rcvd %s cmd:x%x "
					 "sector x%llx cnt %u pt %x\n",
					 dif_op_str[scsi_get_prot_op(cmnd)],
					 cmnd->cmnd[0],
					 (unsigned long long)scsi_get_lba(cmnd),
					 blk_rq_sectors(cmnd->request),
					 (cmnd->cmnd[1]>>5));
4750
		}
4751 4752
		err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
	} else {
4753
		if (vport->phba->cfg_enable_bg) {
4754 4755
			lpfc_printf_vlog(vport,
					 KERN_INFO, LOG_SCSI_CMD,
4756 4757 4758 4759
					 "9038 BLKGRD: rcvd PROT_NORMAL cmd: "
					 "x%x sector x%llx cnt %u pt %x\n",
					 cmnd->cmnd[0],
					 (unsigned long long)scsi_get_lba(cmnd),
4760
					 blk_rq_sectors(cmnd->request),
4761
					 (cmnd->cmnd[1]>>5));
4762
		}
4763 4764 4765
		err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
	}

已提交
4766 4767 4768
	if (err)
		goto out_host_busy_free_buf;

J
James Smart 已提交
4769
	lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
已提交
4770

4771
	atomic_inc(&ndlp->cmd_pending);
4772
	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
4773
				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
4774 4775
	if (err) {
		atomic_dec(&ndlp->cmd_pending);
已提交
4776
		goto out_host_busy_free_buf;
4777
	}
4778
	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
4779 4780 4781
		lpfc_sli_handle_fast_ring_event(phba,
			&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);

4782 4783 4784 4785
		if (phba->cfg_poll & DISABLE_FCP_RING_INT)
			lpfc_poll_rearm_timer(phba);
	}

已提交
4786 4787 4788
	return 0;

 out_host_busy_free_buf:
4789
	lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
4790
	lpfc_release_scsi_buf(phba, lpfc_cmd);
已提交
4791 4792 4793
 out_host_busy:
	return SCSI_MLQUEUE_HOST_BUSY;

4794 4795 4796
 out_tgt_busy:
	return SCSI_MLQUEUE_TARGET_BUSY;

已提交
4797
 out_fail_command:
4798
	cmnd->scsi_done(cmnd);
已提交
4799 4800 4801
	return 0;
}

J
Jeff Garzik 已提交
4802

4803
/**
4804
 * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
4805 4806 4807 4808 4809 4810 4811 4812
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine aborts @cmnd pending in base driver.
 *
 * Return code :
 *   0x2003 - Error
 *   0x2002 - Success
 **/
已提交
4813
static int
4814
lpfc_abort_handler(struct scsi_cmnd *cmnd)
已提交
4815
{
J
James Smart 已提交
4816 4817 4818
	struct Scsi_Host  *shost = cmnd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba   *phba = vport->phba;
4819 4820
	struct lpfc_iocbq *iocb;
	struct lpfc_iocbq *abtsiocb;
已提交
4821 4822
	struct lpfc_scsi_buf *lpfc_cmd;
	IOCB_t *cmd, *icmd;
4823
	int ret = SUCCESS, status = 0;
4824
	unsigned long flags;
4825
	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
已提交
4826

4827
	status = fc_block_scsi_eh(cmnd);
4828
	if (status != 0 && status != SUCCESS)
4829
		return status;
4830

4831
	spin_lock_irqsave(&phba->hbalock, flags);
4832 4833
	/* driver queued commands are in process of being flushed */
	if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
4834
		spin_unlock_irqrestore(&phba->hbalock, flags);
4835 4836 4837 4838 4839 4840
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
			"3168 SCSI Layer abort requested I/O has been "
			"flushed by LLD.\n");
		return FAILED;
	}

4841
	lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
4842
	if (!lpfc_cmd || !lpfc_cmd->pCmd) {
4843
		spin_unlock_irqrestore(&phba->hbalock, flags);
J
James Smart 已提交
4844 4845
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
			 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
4846
			 "x%x ID %d LUN %d\n",
4847
			 SUCCESS, cmnd->device->id, cmnd->device->lun);
J
James Smart 已提交
4848 4849
		return SUCCESS;
	}
已提交
4850

4851 4852 4853
	iocb = &lpfc_cmd->cur_iocbq;
	/* the command is in process of being cancelled */
	if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
4854
		spin_unlock_irqrestore(&phba->hbalock, flags);
4855 4856 4857 4858 4859
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
			"3169 SCSI Layer abort requested I/O has been "
			"cancelled by LLD.\n");
		return FAILED;
	}
4860 4861 4862 4863
	/*
	 * If pCmd field of the corresponding lpfc_scsi_buf structure
	 * points to a different SCSI command, then the driver has
	 * already completed this command, but the midlayer did not
4864
	 * see the completion before the eh fired. Just return SUCCESS.
4865
	 */
4866 4867 4868 4869 4870 4871
	if (lpfc_cmd->pCmd != cmnd) {
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
			"3170 SCSI Layer abort requested I/O has been "
			"completed by LLD.\n");
		goto out_unlock;
	}
已提交
4872

4873
	BUG_ON(iocb->context1 != lpfc_cmd);
已提交
4874

4875
	abtsiocb = __lpfc_sli_get_iocbq(phba);
4876 4877
	if (abtsiocb == NULL) {
		ret = FAILED;
4878
		goto out_unlock;
已提交
4879 4880 4881
	}

	/*
4882 4883 4884
	 * The scsi command can not be in txq and it is in flight because the
	 * pCmd is still pointig at the SCSI command we have to abort. There
	 * is no need to search the txcmplq. Just send an abort to the FW.
已提交
4885 4886
	 */

4887 4888 4889 4890
	cmd = &iocb->iocb;
	icmd = &abtsiocb->iocb;
	icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
	icmd->un.acxri.abortContextTag = cmd->ulpContext;
4891 4892 4893 4894
	if (phba->sli_rev == LPFC_SLI_REV4)
		icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
	else
		icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
已提交
4895

4896 4897
	icmd->ulpLe = 1;
	icmd->ulpClass = cmd->ulpClass;
4898 4899 4900

	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
	abtsiocb->fcp_wqidx = iocb->fcp_wqidx;
4901
	abtsiocb->iocb_flag |= LPFC_USE_FCPWQIDX;
4902

J
James Smart 已提交
4903
	if (lpfc_is_link_up(phba))
4904 4905 4906
		icmd->ulpCommand = CMD_ABORT_XRI_CN;
	else
		icmd->ulpCommand = CMD_CLOSE_XRI_CN;
已提交
4907

4908
	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
J
James Smart 已提交
4909
	abtsiocb->vport = vport;
4910
	/* no longer need the lock after this point */
4911
	spin_unlock_irqrestore(&phba->hbalock, flags);
4912

4913 4914
	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
	    IOCB_ERROR) {
4915 4916 4917 4918
		lpfc_sli_release_iocbq(phba, abtsiocb);
		ret = FAILED;
		goto out;
	}
已提交
4919

4920
	if (phba->cfg_poll & DISABLE_FCP_RING_INT)
4921 4922
		lpfc_sli_handle_fast_ring_event(phba,
			&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
4923

4924
	lpfc_cmd->waitq = &waitq;
4925
	/* Wait for abort to complete */
4926 4927
	wait_event_timeout(waitq,
			  (lpfc_cmd->pCmd != cmnd),
4928
			   msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
4929
	lpfc_cmd->waitq = NULL;
已提交
4930

4931 4932
	if (lpfc_cmd->pCmd == cmnd) {
		ret = FAILED;
4933 4934
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
				 "0748 abort handler timed out waiting "
4935 4936 4937 4938
				 "for abortng I/O (xri:x%x) to complete: "
				 "ret %#x, ID %d, LUN %d\n",
				 iocb->sli4_xritag, ret,
				 cmnd->device->id, cmnd->device->lun);
已提交
4939
	}
4940
	goto out;
已提交
4941

4942
out_unlock:
4943
	spin_unlock_irqrestore(&phba->hbalock, flags);
4944
out:
4945 4946
	lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
			 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
4947 4948
			 "LUN %d\n", ret, cmnd->device->id,
			 cmnd->device->lun);
4949
	return ret;
4950 4951
}

4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974
static char *
lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
{
	switch (task_mgmt_cmd) {
	case FCP_ABORT_TASK_SET:
		return "ABORT_TASK_SET";
	case FCP_CLEAR_TASK_SET:
		return "FCP_CLEAR_TASK_SET";
	case FCP_BUS_RESET:
		return "FCP_BUS_RESET";
	case FCP_LUN_RESET:
		return "FCP_LUN_RESET";
	case FCP_TARGET_RESET:
		return "FCP_TARGET_RESET";
	case FCP_CLEAR_ACA:
		return "FCP_CLEAR_ACA";
	case FCP_TERMINATE_TASK:
		return "FCP_TERMINATE_TASK";
	default:
		return "unknown";
	}
}

4975
/**
4976 4977 4978 4979 4980 4981
 * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
 * @vport: The virtual port for which this call is being executed.
 * @rdata: Pointer to remote port local data
 * @tgt_id: Target ID of remote device.
 * @lun_id: Lun number for the TMF
 * @task_mgmt_cmd: type of TMF to send
4982
 *
4983 4984
 * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
 * a remote port.
4985
 *
4986 4987 4988
 * Return Code:
 *   0x2003 - Error
 *   0x2002 - Success.
4989
 **/
已提交
4990
static int
4991 4992 4993
lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
		    unsigned  tgt_id, unsigned int lun_id,
		    uint8_t task_mgmt_cmd)
已提交
4994
{
J
James Smart 已提交
4995
	struct lpfc_hba   *phba = vport->phba;
4996
	struct lpfc_scsi_buf *lpfc_cmd;
4997 4998
	struct lpfc_iocbq *iocbq;
	struct lpfc_iocbq *iocbqrsp;
4999
	struct lpfc_nodelist *pnode = rdata->pnode;
5000
	int ret;
5001
	int status;
已提交
5002

5003
	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
5004
		return FAILED;
5005

5006
	lpfc_cmd = lpfc_get_scsi_buf(phba, rdata->pnode);
已提交
5007
	if (lpfc_cmd == NULL)
5008
		return FAILED;
已提交
5009
	lpfc_cmd->timeout = 60;
5010
	lpfc_cmd->rdata = rdata;
已提交
5011

5012 5013
	status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
					   task_mgmt_cmd);
5014 5015 5016 5017
	if (!status) {
		lpfc_release_scsi_buf(phba, lpfc_cmd);
		return FAILED;
	}
已提交
5018

5019
	iocbq = &lpfc_cmd->cur_iocbq;
5020
	iocbqrsp = lpfc_sli_get_iocbq(phba);
5021 5022 5023 5024
	if (iocbqrsp == NULL) {
		lpfc_release_scsi_buf(phba, lpfc_cmd);
		return FAILED;
	}
5025
	iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
5026

5027
	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
5028
			 "0702 Issue %s to TGT %d LUN %d "
5029
			 "rpi x%x nlp_flag x%x Data: x%x x%x\n",
5030
			 lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
5031 5032
			 pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag,
			 iocbq->iocb_flag);
5033

5034
	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
5035
					  iocbq, iocbqrsp, lpfc_cmd->timeout);
5036 5037 5038 5039
	if (status != IOCB_SUCCESS) {
		if (status == IOCB_TIMEDOUT) {
			ret = TIMEOUT_ERROR;
		} else
5040
			ret = FAILED;
5041 5042
		lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5043 5044
			 "0727 TMF %s to TGT %d LUN %d failed (%d, %d) "
			 "iocb_flag x%x\n",
5045 5046
			 lpfc_taskmgmt_name(task_mgmt_cmd),
			 tgt_id, lun_id, iocbqrsp->iocb.ulpStatus,
5047 5048
			 iocbqrsp->iocb.un.ulpWord[4],
			 iocbq->iocb_flag);
5049 5050 5051
	} else if (status == IOCB_BUSY)
		ret = FAILED;
	else
5052 5053
		ret = SUCCESS;

5054
	lpfc_sli_release_iocbq(phba, iocbqrsp);
5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077

	if (ret != TIMEOUT_ERROR)
		lpfc_release_scsi_buf(phba, lpfc_cmd);

	return ret;
}

/**
 * lpfc_chk_tgt_mapped -
 * @vport: The virtual port to check on
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine delays until the scsi target (aka rport) for the
 * command exists (is present and logged in) or we declare it non-existent.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
{
	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
5078
	struct lpfc_nodelist *pnode;
5079 5080
	unsigned long later;

5081 5082 5083 5084 5085 5086
	if (!rdata) {
		lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
			"0797 Tgt Map rport failure: rdata x%p\n", rdata);
		return FAILED;
	}
	pnode = rdata->pnode;
5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133
	/*
	 * If target is not in a MAPPED state, delay until
	 * target is rediscovered or devloss timeout expires.
	 */
	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
	while (time_after(later, jiffies)) {
		if (!pnode || !NLP_CHK_NODE_ACT(pnode))
			return FAILED;
		if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
			return SUCCESS;
		schedule_timeout_uninterruptible(msecs_to_jiffies(500));
		rdata = cmnd->device->hostdata;
		if (!rdata)
			return FAILED;
		pnode = rdata->pnode;
	}
	if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
	    (pnode->nlp_state != NLP_STE_MAPPED_NODE))
		return FAILED;
	return SUCCESS;
}

/**
 * lpfc_reset_flush_io_context -
 * @vport: The virtual port (scsi_host) for the flush context
 * @tgt_id: If aborting by Target contect - specifies the target id
 * @lun_id: If aborting by Lun context - specifies the lun id
 * @context: specifies the context level to flush at.
 *
 * After a reset condition via TMF, we need to flush orphaned i/o
 * contexts from the adapter. This routine aborts any contexts
 * outstanding, then waits for their completions. The wait is
 * bounded by devloss_tmo though.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
			uint64_t lun_id, lpfc_ctx_cmd context)
{
	struct lpfc_hba   *phba = vport->phba;
	unsigned long later;
	int cnt;

	cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
5134
	if (cnt)
5135
		lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
5136
				    tgt_id, lun_id, context);
5137 5138 5139
	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
	while (time_after(later, jiffies) && cnt) {
		schedule_timeout_uninterruptible(msecs_to_jiffies(20));
5140
		cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
已提交
5141 5142
	}
	if (cnt) {
5143
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
5144 5145 5146 5147 5148 5149
			"0724 I/O flush failure for context %s : cnt x%x\n",
			((context == LPFC_CTX_LUN) ? "LUN" :
			 ((context == LPFC_CTX_TGT) ? "TGT" :
			  ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
			cnt);
		return FAILED;
已提交
5150
	}
5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170
	return SUCCESS;
}

/**
 * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does a device reset by sending a LUN_RESET task management
 * command.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
{
	struct Scsi_Host  *shost = cmnd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
5171
	struct lpfc_nodelist *pnode;
5172 5173 5174
	unsigned tgt_id = cmnd->device->id;
	unsigned int lun_id = cmnd->device->lun;
	struct lpfc_scsi_event_header scsi_event;
5175
	int status, ret = SUCCESS;
5176

5177 5178 5179 5180 5181 5182
	if (!rdata) {
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			"0798 Device Reset rport failure: rdata x%p\n", rdata);
		return FAILED;
	}
	pnode = rdata->pnode;
5183
	status = fc_block_scsi_eh(cmnd);
5184
	if (status != 0 && status != SUCCESS)
5185
		return status;
5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215

	status = lpfc_chk_tgt_mapped(vport, cmnd);
	if (status == FAILED) {
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			"0721 Device Reset rport failure: rdata x%p\n", rdata);
		return FAILED;
	}

	scsi_event.event_type = FC_REG_SCSI_EVENT;
	scsi_event.subcategory = LPFC_EVENT_LUNRESET;
	scsi_event.lun = lun_id;
	memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
	memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));

	fc_host_post_vendor_event(shost, fc_get_event_number(),
		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);

	status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
						FCP_LUN_RESET);

	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			 "0713 SCSI layer issued Device Reset (%d, %d) "
			 "return x%x\n", tgt_id, lun_id, status);

	/*
	 * We have to clean up i/o as : they may be orphaned by the TMF;
	 * or if the TMF failed, they may be in an indeterminate state.
	 * So, continue on.
	 * We will report success if all the i/o aborts successfully.
	 */
5216
	ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
5217
						LPFC_CTX_LUN);
5218
	return ret;
5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237
}

/**
 * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does a target reset by sending a TARGET_RESET task management
 * command.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
{
	struct Scsi_Host  *shost = cmnd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
5238
	struct lpfc_nodelist *pnode;
5239 5240 5241
	unsigned tgt_id = cmnd->device->id;
	unsigned int lun_id = cmnd->device->lun;
	struct lpfc_scsi_event_header scsi_event;
5242
	int status, ret = SUCCESS;
5243

5244 5245 5246 5247 5248 5249
	if (!rdata) {
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			"0799 Target Reset rport failure: rdata x%p\n", rdata);
		return FAILED;
	}
	pnode = rdata->pnode;
5250
	status = fc_block_scsi_eh(cmnd);
5251
	if (status != 0 && status != SUCCESS)
5252
		return status;
5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282

	status = lpfc_chk_tgt_mapped(vport, cmnd);
	if (status == FAILED) {
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			"0722 Target Reset rport failure: rdata x%p\n", rdata);
		return FAILED;
	}

	scsi_event.event_type = FC_REG_SCSI_EVENT;
	scsi_event.subcategory = LPFC_EVENT_TGTRESET;
	scsi_event.lun = 0;
	memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
	memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));

	fc_host_post_vendor_event(shost, fc_get_event_number(),
		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);

	status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
					FCP_TARGET_RESET);

	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			 "0723 SCSI layer issued Target Reset (%d, %d) "
			 "return x%x\n", tgt_id, lun_id, status);

	/*
	 * We have to clean up i/o as : they may be orphaned by the TMF;
	 * or if the TMF failed, they may be in an indeterminate state.
	 * So, continue on.
	 * We will report success if all the i/o aborts successfully.
	 */
5283 5284 5285
	ret = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
					  LPFC_CTX_TGT);
	return ret;
已提交
5286 5287
}

5288
/**
5289
 * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
5290 5291
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
5292 5293
 * This routine does target reset to all targets on @cmnd->device->host.
 * This emulates Parallel SCSI Bus Reset Semantics.
5294
 *
5295 5296 5297
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
5298
 **/
5299
static int
5300
lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
已提交
5301
{
J
James Smart 已提交
5302 5303
	struct Scsi_Host  *shost = cmnd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
已提交
5304
	struct lpfc_nodelist *ndlp = NULL;
5305
	struct lpfc_scsi_event_header scsi_event;
5306 5307
	int match;
	int ret = SUCCESS, status, i;
5308 5309 5310 5311 5312 5313 5314

	scsi_event.event_type = FC_REG_SCSI_EVENT;
	scsi_event.subcategory = LPFC_EVENT_BUSRESET;
	scsi_event.lun = 0;
	memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
	memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));

5315 5316
	fc_host_post_vendor_event(shost, fc_get_event_number(),
		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
已提交
5317

5318
	status = fc_block_scsi_eh(cmnd);
5319
	if (status != 0 && status != SUCCESS)
5320
		return status;
5321

已提交
5322 5323 5324 5325 5326
	/*
	 * Since the driver manages a single bus device, reset all
	 * targets known to the driver.  Should any target reset
	 * fail, this routine returns failure to the midlayer.
	 */
5327
	for (i = 0; i < LPFC_MAX_TARGET; i++) {
5328
		/* Search for mapped node by target ID */
已提交
5329
		match = 0;
J
James Smart 已提交
5330 5331
		spin_lock_irq(shost->host_lock);
		list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
5332 5333
			if (!NLP_CHK_NODE_ACT(ndlp))
				continue;
5334 5335 5336
			if (vport->phba->cfg_fcp2_no_tgt_reset &&
			    (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
				continue;
5337
			if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
5338
			    ndlp->nlp_sid == i &&
5339
			    ndlp->rport) {
已提交
5340 5341 5342 5343
				match = 1;
				break;
			}
		}
J
James Smart 已提交
5344
		spin_unlock_irq(shost->host_lock);
已提交
5345 5346
		if (!match)
			continue;
5347 5348 5349 5350 5351

		status = lpfc_send_taskmgmt(vport, ndlp->rport->dd_data,
					i, 0, FCP_TARGET_RESET);

		if (status != SUCCESS) {
5352 5353 5354
			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
					 "0700 Bus Reset on target %d failed\n",
					 i);
5355
			ret = FAILED;
已提交
5356 5357
		}
	}
5358
	/*
5359 5360 5361 5362
	 * We have to clean up i/o as : they may be orphaned by the TMFs
	 * above; or if any of the TMFs failed, they may be in an
	 * indeterminate state.
	 * We will report success if all the i/o aborts successfully.
5363
	 */
5364 5365 5366

	status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
	if (status != SUCCESS)
5367
		ret = FAILED;
5368

5369 5370
	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			 "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
已提交
5371 5372 5373
	return ret;
}

5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397
/**
 * lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
 * @cmnd: Pointer to scsi_cmnd data structure.
 *
 * This routine does host reset to the adaptor port. It brings the HBA
 * offline, performs a board restart, and then brings the board back online.
 * The lpfc_offline calls lpfc_sli_hba_down which will abort and local
 * reject all outstanding SCSI commands to the host and error returned
 * back to SCSI mid-level. As this will be SCSI mid-level's last resort
 * of error handling, it will only return error if resetting of the adapter
 * is not successful; in all other cases, will return success.
 *
 * Return code :
 *  0x2003 - Error
 *  0x2002 - Success
 **/
static int
lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
{
	struct Scsi_Host *shost = cmnd->device->host;
	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
	struct lpfc_hba *phba = vport->phba;
	int rc, ret = SUCCESS;

5398 5399 5400
	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
			 "3172 SCSI layer issued Host Reset Data:\n");

5401
	lpfc_offline_prep(phba, LPFC_MBX_WAIT);
5402 5403 5404 5405
	lpfc_offline(phba);
	rc = lpfc_sli_brdrestart(phba);
	if (rc)
		ret = FAILED;
5406 5407 5408
	rc = lpfc_online(phba);
	if (rc)
		ret = FAILED;
5409 5410
	lpfc_unblock_mgmt_io(phba);

5411 5412 5413 5414 5415
	if (ret == FAILED) {
		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
				 "3323 Failed host reset, bring it offline\n");
		lpfc_sli4_offline_eratt(phba);
	}
5416 5417 5418
	return ret;
}

5419
/**
5420
 * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431
 * @sdev: Pointer to scsi_device.
 *
 * This routine populates the cmds_per_lun count + 2 scsi_bufs into  this host's
 * globally available list of scsi buffers. This routine also makes sure scsi
 * buffer is not allocated more than HBA limit conveyed to midlayer. This list
 * of scsi buffer exists for the lifetime of the driver.
 *
 * Return codes:
 *   non-0 - Error
 *   0 - Success
 **/
已提交
5432 5433 5434
static int
lpfc_slave_alloc(struct scsi_device *sdev)
{
J
James Smart 已提交
5435 5436
	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
	struct lpfc_hba   *phba = vport->phba;
5437
	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
5438
	uint32_t total = 0;
已提交
5439
	uint32_t num_to_alloc = 0;
5440
	int num_allocated = 0;
5441
	uint32_t sdev_cnt;
已提交
5442

5443
	if (!rport || fc_remote_port_chkready(rport))
已提交
5444 5445
		return -ENXIO;

5446
	sdev->hostdata = rport->dd_data;
5447
	sdev_cnt = atomic_inc_return(&phba->sdev_cnt);
已提交
5448 5449 5450 5451

	/*
	 * Populate the cmds_per_lun count scsi_bufs into this host's globally
	 * available list of scsi buffers.  Don't allocate more than the
5452 5453 5454
	 * HBA limit conveyed to the midlayer via the host structure.  The
	 * formula accounts for the lun_queue_depth + error handlers + 1
	 * extra.  This list of scsi bufs exists for the lifetime of the driver.
已提交
5455 5456
	 */
	total = phba->total_scsi_bufs;
5457
	num_to_alloc = vport->cfg_lun_queue_depth + 2;
5458

5459 5460 5461 5462
	/* If allocated buffers are enough do nothing */
	if ((sdev_cnt * (vport->cfg_lun_queue_depth + 2)) < total)
		return 0;

5463 5464
	/* Allow some exchanges to be available always to complete discovery */
	if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5465 5466 5467
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
				 "0704 At limitation of %d preallocated "
				 "command buffers\n", total);
已提交
5468
		return 0;
5469 5470 5471
	/* Allow some exchanges to be available always to complete discovery */
	} else if (total + num_to_alloc >
		phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
5472 5473 5474 5475 5476 5477
		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
				 "0705 Allocation request of %d "
				 "command buffers will exceed max of %d.  "
				 "Reducing allocation request to %d.\n",
				 num_to_alloc, phba->cfg_hba_queue_depth,
				 (phba->cfg_hba_queue_depth - total));
已提交
5478 5479
		num_to_alloc = phba->cfg_hba_queue_depth - total;
	}
5480 5481
	num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
	if (num_to_alloc != num_allocated) {
5482 5483 5484 5485 5486
			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
					 "0708 Allocation request of %d "
					 "command buffers did not succeed.  "
					 "Allocated %d buffers.\n",
					 num_to_alloc, num_allocated);
已提交
5487
	}
5488 5489
	if (num_allocated > 0)
		phba->total_scsi_bufs += num_allocated;
已提交
5490 5491 5492
	return 0;
}

5493
/**
5494
 * lpfc_slave_configure - scsi_host_template slave_configure entry point
5495 5496 5497 5498 5499 5500 5501 5502 5503
 * @sdev: Pointer to scsi_device.
 *
 * This routine configures following items
 *   - Tag command queuing support for @sdev if supported.
 *   - Enable SLI polling for fcp ring if ENABLE_FCP_RING_POLLING flag is set.
 *
 * Return codes:
 *   0 - Success
 **/
已提交
5504 5505 5506
static int
lpfc_slave_configure(struct scsi_device *sdev)
{
J
James Smart 已提交
5507 5508
	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
	struct lpfc_hba   *phba = vport->phba;
已提交
5509 5510

	if (sdev->tagged_supported)
5511
		scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
已提交
5512
	else
5513
		scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);
已提交
5514

5515
	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
5516 5517
		lpfc_sli_handle_fast_ring_event(phba,
			&phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
5518 5519 5520 5521
		if (phba->cfg_poll & DISABLE_FCP_RING_INT)
			lpfc_poll_rearm_timer(phba);
	}

已提交
5522 5523 5524
	return 0;
}

5525
/**
5526
 * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
5527 5528 5529 5530
 * @sdev: Pointer to scsi_device.
 *
 * This routine sets @sdev hostatdata filed to null.
 **/
已提交
5531 5532 5533
static void
lpfc_slave_destroy(struct scsi_device *sdev)
{
5534 5535 5536
	struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
	struct lpfc_hba   *phba = vport->phba;
	atomic_dec(&phba->sdev_cnt);
已提交
5537 5538 5539 5540
	sdev->hostdata = NULL;
	return;
}

5541

已提交
5542 5543 5544 5545 5546 5547
struct scsi_host_template lpfc_template = {
	.module			= THIS_MODULE,
	.name			= LPFC_DRIVER_NAME,
	.info			= lpfc_info,
	.queuecommand		= lpfc_queuecommand,
	.eh_abort_handler	= lpfc_abort_handler,
5548 5549
	.eh_device_reset_handler = lpfc_device_reset_handler,
	.eh_target_reset_handler = lpfc_target_reset_handler,
5550
	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
5551
	.eh_host_reset_handler  = lpfc_host_reset_handler,
已提交
5552 5553 5554
	.slave_alloc		= lpfc_slave_alloc,
	.slave_configure	= lpfc_slave_configure,
	.slave_destroy		= lpfc_slave_destroy,
5555
	.scan_finished		= lpfc_scan_finished,
已提交
5556
	.this_id		= -1,
5557
	.sg_tablesize		= LPFC_DEFAULT_SG_SEG_CNT,
已提交
5558 5559
	.cmd_per_lun		= LPFC_CMD_PER_LUN,
	.use_clustering		= ENABLE_CLUSTERING,
J
James Smart 已提交
5560
	.shost_attrs		= lpfc_hba_attrs,
5561
	.max_sectors		= 0xFFFF,
5562
	.vendor_id		= LPFC_NL_VENDOR_ID,
5563
	.change_queue_depth	= lpfc_change_queue_depth,
5564
	.change_queue_type	= lpfc_change_queue_type,
已提交
5565
};
5566 5567 5568 5569 5570 5571 5572

struct scsi_host_template lpfc_vport_template = {
	.module			= THIS_MODULE,
	.name			= LPFC_DRIVER_NAME,
	.info			= lpfc_info,
	.queuecommand		= lpfc_queuecommand,
	.eh_abort_handler	= lpfc_abort_handler,
5573 5574
	.eh_device_reset_handler = lpfc_device_reset_handler,
	.eh_target_reset_handler = lpfc_target_reset_handler,
5575 5576 5577 5578 5579 5580
	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
	.slave_alloc		= lpfc_slave_alloc,
	.slave_configure	= lpfc_slave_configure,
	.slave_destroy		= lpfc_slave_destroy,
	.scan_finished		= lpfc_scan_finished,
	.this_id		= -1,
5581
	.sg_tablesize		= LPFC_DEFAULT_SG_SEG_CNT,
5582 5583 5584 5585
	.cmd_per_lun		= LPFC_CMD_PER_LUN,
	.use_clustering		= ENABLE_CLUSTERING,
	.shost_attrs		= lpfc_vport_attrs,
	.max_sectors		= 0xFFFF,
5586
	.change_queue_depth	= lpfc_change_queue_depth,
5587
	.change_queue_type	= lpfc_change_queue_type,
5588
};