cr_bllcd.c 7.2 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176
/*
 * Copyright (c) Intel Corp. 2007.
 * All Rights Reserved.
 *
 * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
 * develop this driver.
 *
 * This file is part of the Carillo Ranch video subsystem driver.
 * The Carillo Ranch video subsystem driver is free software;
 * you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * The Carillo Ranch video subsystem driver is distributed
 * in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this driver; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 *
 * Authors:
 *   Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
 *   Alan Hourihane <alanh-at-tungstengraphics-dot-com>
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/pci.h>
#include <asm/uaccess.h>

/* The LVDS- and panel power controls sits on the
 * GPIO port of the ISA bridge.
 */

#define CRVML_DEVICE_LPC    0x27B8
#define CRVML_REG_GPIOBAR   0x48
#define CRVML_REG_GPIOEN    0x4C
#define CRVML_GPIOEN_BIT    (1 << 4)
#define CRVML_PANEL_PORT    0x38
#define CRVML_LVDS_ON       0x00000001
#define CRVML_PANEL_ON      0x00000002
#define CRVML_BACKLIGHT_OFF 0x00000004

/* The PLL Clock register sits on Host bridge */
#define CRVML_DEVICE_MCH   0x5001
#define CRVML_REG_MCHBAR   0x44
#define CRVML_REG_MCHEN    0x54
#define CRVML_MCHEN_BIT    (1 << 28)
#define CRVML_MCHMAP_SIZE  4096
#define CRVML_REG_CLOCK    0xc3c
#define CRVML_CLOCK_SHIFT  8
#define CRVML_CLOCK_MASK   0x00000f00

static struct pci_dev *lpc_dev;
static u32 gpio_bar;

struct cr_panel {
	struct backlight_device *cr_backlight_device;
	struct lcd_device *cr_lcd_device;
};

static int cr_backlight_set_intensity(struct backlight_device *bd)
{
	int intensity = bd->props.brightness;
	u32 addr = gpio_bar + CRVML_PANEL_PORT;
	u32 cur = inl(addr);

	if (bd->props.power == FB_BLANK_UNBLANK)
		intensity = FB_BLANK_UNBLANK;
	if (bd->props.fb_blank == FB_BLANK_UNBLANK)
		intensity = FB_BLANK_UNBLANK;
	if (bd->props.power == FB_BLANK_POWERDOWN)
		intensity = FB_BLANK_POWERDOWN;
	if (bd->props.fb_blank == FB_BLANK_POWERDOWN)
		intensity = FB_BLANK_POWERDOWN;

	if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */
		cur &= ~CRVML_BACKLIGHT_OFF;
		outl(cur, addr);
	} else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */
		cur |= CRVML_BACKLIGHT_OFF;
		outl(cur, addr);
	} /* anything else, don't bother */

	return 0;
}

static int cr_backlight_get_intensity(struct backlight_device *bd)
{
	u32 addr = gpio_bar + CRVML_PANEL_PORT;
	u32 cur = inl(addr);
	u8 intensity;

	if (cur & CRVML_BACKLIGHT_OFF)
		intensity = FB_BLANK_POWERDOWN;
	else
		intensity = FB_BLANK_UNBLANK;

	return intensity;
}

static struct backlight_ops cr_backlight_ops = {
	.get_brightness = cr_backlight_get_intensity,
	.update_status = cr_backlight_set_intensity,
};

static void cr_panel_on(void)
{
	u32 addr = gpio_bar + CRVML_PANEL_PORT;
	u32 cur = inl(addr);

	if (!(cur & CRVML_PANEL_ON)) {
		/* Make sure LVDS controller is down. */
		if (cur & 0x00000001) {
			cur &= ~CRVML_LVDS_ON;
			outl(cur, addr);
		}
		/* Power up Panel */
		schedule_timeout(HZ / 10);
		cur |= CRVML_PANEL_ON;
		outl(cur, addr);
	}

	/* Power up LVDS controller */

	if (!(cur & CRVML_LVDS_ON)) {
		schedule_timeout(HZ / 10);
		outl(cur | CRVML_LVDS_ON, addr);
	}
}

static void cr_panel_off(void)
{
	u32 addr = gpio_bar + CRVML_PANEL_PORT;
	u32 cur = inl(addr);

	/* Power down LVDS controller first to avoid high currents */
	if (cur & CRVML_LVDS_ON) {
		cur &= ~CRVML_LVDS_ON;
		outl(cur, addr);
	}
	if (cur & CRVML_PANEL_ON) {
		schedule_timeout(HZ / 10);
		outl(cur & ~CRVML_PANEL_ON, addr);
	}
}

static int cr_lcd_set_power(struct lcd_device *ld, int power)
{
	if (power == FB_BLANK_UNBLANK)
		cr_panel_on();
	if (power == FB_BLANK_POWERDOWN)
		cr_panel_off();

	return 0;
}

static struct lcd_ops cr_lcd_ops = {
	.set_power = cr_lcd_set_power,
};

static int cr_backlight_probe(struct platform_device *pdev)
{
	struct cr_panel *crp;
	u8 dev_en;

177
	crp = kzalloc(sizeof(*crp), GFP_KERNEL);
178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204
	if (crp == NULL)
		return -ENOMEM;

	lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
					CRVML_DEVICE_LPC, NULL);
	if (!lpc_dev) {
		printk("INTEL CARILLO RANCH LPC not found.\n");
		return -ENODEV;
	}

	pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
	if (!(dev_en & CRVML_GPIOEN_BIT)) {
		printk(KERN_ERR
		       "Carillo Ranch GPIO device was not enabled.\n");
		pci_dev_put(lpc_dev);
		return -ENODEV;
	}

	crp->cr_backlight_device = backlight_device_register("cr-backlight",
							     &pdev->dev, NULL,
							     &cr_backlight_ops);
	if (IS_ERR(crp->cr_backlight_device)) {
		pci_dev_put(lpc_dev);
		return PTR_ERR(crp->cr_backlight_device);
	}

	crp->cr_lcd_device = lcd_device_register("cr-lcd",
A
Andrew Morton 已提交
205
							&pdev->dev, NULL,
206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287
							&cr_lcd_ops);

	if (IS_ERR(crp->cr_lcd_device)) {
		pci_dev_put(lpc_dev);
		return PTR_ERR(crp->cr_backlight_device);
	}

	pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
			      &gpio_bar);
	gpio_bar &= ~0x3F;

	crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
	crp->cr_backlight_device->props.brightness = 0;
	crp->cr_backlight_device->props.max_brightness = 0;
	cr_backlight_set_intensity(crp->cr_backlight_device);

	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);

	platform_set_drvdata(pdev, crp);

	return 0;
}

static int cr_backlight_remove(struct platform_device *pdev)
{
	struct cr_panel *crp = platform_get_drvdata(pdev);
	crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
	crp->cr_backlight_device->props.brightness = 0;
	crp->cr_backlight_device->props.max_brightness = 0;
	cr_backlight_set_intensity(crp->cr_backlight_device);
	cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
	backlight_device_unregister(crp->cr_backlight_device);
	lcd_device_unregister(crp->cr_lcd_device);
	pci_dev_put(lpc_dev);

	return 0;
}

static struct platform_driver cr_backlight_driver = {
	.probe = cr_backlight_probe,
	.remove = cr_backlight_remove,
	.driver = {
		   .name = "cr_backlight",
		   },
};

static struct platform_device *crp;

static int __init cr_backlight_init(void)
{
	int ret = platform_driver_register(&cr_backlight_driver);

	if (!ret) {
		crp = platform_device_alloc("cr_backlight", -1);
		if (!crp)
			return -ENOMEM;

		ret = platform_device_add(crp);

		if (ret) {
			platform_device_put(crp);
			platform_driver_unregister(&cr_backlight_driver);
		}
	}

	printk("Carillo Ranch Backlight Driver Initialized.\n");

	return ret;
}

static void __exit cr_backlight_exit(void)
{
	platform_device_unregister(crp);
	platform_driver_unregister(&cr_backlight_driver);
}

module_init(cr_backlight_init);
module_exit(cr_backlight_exit);

MODULE_AUTHOR("Tungsten Graphics Inc.");
MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
MODULE_LICENSE("GPL");