Update HAL to V1.6.0; Fix the armcc startup file.

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx.h
   * @author  MCD Application Team
-  * @version V2.5.1
-  * @date    28-June-2016
+  * @version V2.6.0
+  * @date    04-November-2016
   * @brief   CMSIS STM32F4xx Device Peripheral Access Layer Header File.
   *            
   *          The file is the unique include file that the application programmer
@@ -79,7 +79,7 @@
     !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
     !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
     !defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
-    !defined (STM32F412Zx)
+    !defined (STM32F412Zx) && !defined (STM32F413xx) && !defined (STM32F423xx)
   /* #define STM32F405xx */   /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
   /* #define STM32F415xx */   /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
   /* #define STM32F407xx */   /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG  and STM32F407IE Devices */
@@ -106,6 +106,9 @@
   /* #define STM32F412Zx */   /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
   /* #define STM32F412Vx */   /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
   /* #define STM32F412Rx */   /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
+  /* #define STM32F413xx */   /*!< STM32F413CH, STM32F413MH, STM32F413RH, STM32F413VH, STM32F413ZH, STM32F413CG, STM32F413MG,
+                                   STM32F413RG, STM32F413VG and STM32F413ZG Devices */
+  /* #define STM32F423xx */   /*!< STM32F423CH, STM32F423RH, STM32F423VH and STM32F423ZH Devices */
 #endif
    
 /*  Tip: To avoid modifying this file each time you need to switch between these
@@ -121,11 +124,11 @@
 #endif /* USE_HAL_DRIVER */
 
 /**
-  * @brief CMSIS version number V2.5.1
+  * @brief CMSIS version number V2.6.0
   */
 #define __STM32F4xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
-#define __STM32F4xx_CMSIS_VERSION_SUB1   (0x05U) /*!< [23:16] sub1 version */
-#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x01U) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
 #define __STM32F4xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32F4xx_CMSIS_VERSION        ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
                                          |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
@@ -182,6 +185,10 @@
   #include "stm32f412rx.h"
 #elif defined(STM32F412Vx)
   #include "stm32f412vx.h"
+#elif defined(STM32F413xx)
+  #include "stm32f413xx.h"
+#elif defined(STM32F423xx)
+  #include "stm32f423xx.h"
 #else
  #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
 #endif

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    system_stm32f4xx.h
   * @author  MCD Application Team
-  * @version V2.5.1
-  * @date    28-June-2016
+  * @version V2.6.0
+  * @date    04-November-2016
   * @brief   CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.       
   ******************************************************************************  
   * @attention
@@ -75,6 +75,8 @@
   */
 extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
 
+extern const uint8_t  AHBPrescTable[16];    /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8];     /*!< APB prescalers table values */
 
 /**
   * @}

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f429xx.s

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file      startup_stm32f429xx.s
   * @author    MCD Application Team
-  * @version   V2.5.1
-  * @date      28-June-2016 
+  * @version   V2.6.0
+  * @date      04-November-2016 
   * @brief     STM32F429xx Devices vector table for GCC based toolchains. 
   *            This module performs:
   *                - Set the initial SP

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f427xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x081FFFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f427xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x2001FFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20020000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f429xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x081FFFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f429xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x2001FFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20020000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f437xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x081FFFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/linker/stm32f437xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__    = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__      = 0x2001FFFF;
+define symbol __ICFEDIT_region_RAM_start__    = 0x20020000;
+define symbol __ICFEDIT_region_RAM_end__      = 0x2002FFFF;
+define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_CCMRAM_end__   = 0x1000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+define region CCMRAM_region   = mem:[from __ICFEDIT_region_CCMRAM_start__   to __ICFEDIT_region_CCMRAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };

bsp/stm32f429-disco/Libraries/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    system_stm32f4xx.c
   * @author  MCD Application Team
-  * @version V2.5.1
-  * @date    28-June-2016
+  * @version V2.6.0
+  * @date    04-November-2016
   * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
   *
   *   This file provides two functions and one global variable to be called from 
@@ -135,9 +135,9 @@
                is no need to call the 2 first functions listed above, since SystemCoreClock
                variable is updated automatically.
   */
-  uint32_t SystemCoreClock = 16000000;
+uint32_t SystemCoreClock = 16000000;
 const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
 /**
   * @}
   */
@@ -287,8 +287,8 @@ void SystemCoreClockUpdate(void)
 }
 
 #if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
-    defined(STM32F469xx) || defined(STM32F479xx)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
 /**
   * @brief  Setup the external memory controller.
   *         Called in startup_stm32f4xx.s before jump to main.

bsp/stm32f429-disco/Libraries/SConscript

 import rtconfig
-Import('RTT_ROOT')
 from building import *
 
 # get current directory
 cwd = GetCurrentDir()
 
 # The set of source files associated with this SConscript file.
-src = Split("""
-CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c
-""")
-
-src += Glob('STM32F4xx_HAL_Driver/Src/*.c')
 
+src = Split('''
+CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dsi.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_lptim.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c
+STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
+''')
 
 #add for startup script
 if rtconfig.CROSS_TOOL == 'gcc':
@@ -25,8 +89,7 @@ path = [cwd + '/STM32F4xx_HAL_Driver/Inc',
     cwd + '/CMSIS/Device/ST/STM32F4xx/Include',
     cwd + '/CMSIS/Include']
 
-#CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.STM32_TYPE]
-CPPDEFINES = ['USE_HAL_DRIVER', 'STM32F429xx']
+CPPDEFINES = ['USE_HAL_DRIVER', rtconfig.STM32_TYPE]
 group = DefineGroup('STM32_HAL', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
 
 Return('group')

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32_hal_legacy.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   This file contains aliases definition for the STM32Cube HAL constants 
   *          macros and functions maintained for legacy purpose.
   ******************************************************************************

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   This file contains all the functions prototypes for the HAL 
   *          module driver.
   ******************************************************************************
@@ -57,6 +57,7 @@
 
 /* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
+
 /* Exported macro ------------------------------------------------------------*/
 /** @defgroup HAL_Exported_Macros HAL Exported Macros
   * @{
@@ -149,7 +150,7 @@
                                                       }while(0);
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ 
 
-#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx)
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
 /** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
   * @{
   */
@@ -177,7 +178,7 @@
 /**
  * @}
  */
-#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
 /**
   * @}
   */

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cortex.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   Header file of CORTEX HAL module.
   ******************************************************************************
   * @attention

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_def.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   This file contains HAL common defines, enumeration, macros and 
   *          structures definitions. 
   ******************************************************************************

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma_ex.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   Header file of DMA HAL extension module.
   ******************************************************************************
   * @attention

bsp/stm32f429-disco/Libraries/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h

@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dsi.h
   * @author  MCD Application Team
-  * @version V1.5.1
-  * @date    01-July-2016
+  * @version V1.6.0
+  * @date    04-November-2016
   * @brief   Header file of DSI HAL module.
   ******************************************************************************
   * @attention