Skip to content

R
rt-thread

宁楠萍 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 f117df84 编写于 作者: whj123999's avatar whj123999
浏览文件
操作

Porting for stm32h7xx spi

上级 cad32a32
展开全部 隐藏空白更改
内联 并排
Showing with 229 addition and 56 deletion
bsp/stm32/libraries/HAL_Drivers/drv_spi.c
浏览文件 @ f117df84
......@@ -8,6 +8,7 @@
* 2018-11-5 SummerGift first version
* 2018-12-11 greedyhao Porting for stm32f7xx
* 2019-01-03 zylx modify DMA initialization and spixfer function
* 2020-01-15 whj4674672 Porting for stm32h7xx
*/
#include "board.h"
......@@ -147,6 +148,8 @@ static rt_err_t stm32_spi_init(struct stm32_spi *spi_drv, struct rt_spi_configur
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0)
SPI_APB_CLOCK = HAL_RCC_GetPCLK1Freq();
#elif defined(SOC_SERIES_STM32H7)
SPI_APB_CLOCK = HAL_RCC_GetSysClockFreq();
#else
SPI_APB_CLOCK = HAL_RCC_GetPCLK2Freq();
#endif
......@@ -205,6 +208,20 @@ static rt_err_t stm32_spi_init(struct stm32_spi *spi_drv, struct rt_spi_configur
spi_handle->State = HAL_SPI_STATE_RESET;
#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32F0)
spi_handle->Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
#elif defined(SOC_SERIES_STM32H7)
spi_handle->Init.Mode = SPI_MODE_MASTER;
spi_handle->Init.NSS = SPI_NSS_SOFT;
spi_handle->Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
spi_handle->Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
spi_handle->Init.CRCPolynomial = 7;
spi_handle->Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
spi_handle->Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
spi_handle->Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
spi_handle->Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
spi_handle->Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
spi_handle->Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_ENABLE;
spi_handle->Init.IOSwap = SPI_IO_SWAP_DISABLE;
spi_handle->Init.FifoThreshold = SPI_FIFO_THRESHOLD_08DATA;
#endif
if (HAL_SPI_Init(spi_handle) != HAL_OK)
......
bsp/stm32/stm32h743-atk-apollo/README.md
浏览文件 @ f117df84
......@@ -51,7 +51,7 @@
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PK15 ---> PIN: 0, 1...176 |
| UART | 支持 | |
| SPI | 暂不支持 | |
| SPI | 支持 | SPI2 |
| I2C | 暂不支持 | |
| SDIO | 暂不支持 | |
| RTC | 支持 | |
......
bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/CubeMX_Config.ioc
浏览文件 @ f117df84
......@@ -23,8 +23,9 @@ KeepUserPlacement=false
Mcu.Family=STM32H7
Mcu.IP0=CORTEX_M7
Mcu.IP1=DEBUG
Mcu.IP10=SYS
Mcu.IP11=USART1
Mcu.IP10=SPI2
Mcu.IP11=SYS
Mcu.IP12=USART1
Mcu.IP2=DMA2D
Mcu.IP3=FMC
Mcu.IP4=IWDG1
......@@ -33,7 +34,7 @@ Mcu.IP6=NVIC
Mcu.IP7=QUADSPI
Mcu.IP8=RCC
Mcu.IP9=RTC
Mcu.IPNb=12
Mcu.IPNb=13
Mcu.Name=STM32H743IITx
Mcu.Package=LQFP176
Mcu.Pin0=PC13
......@@ -73,53 +74,56 @@ Mcu.Pin39=PH10
Mcu.Pin4=PI10
Mcu.Pin40=PH11
Mcu.Pin41=PH12
Mcu.Pin42=PD8
Mcu.Pin43=PD9
Mcu.Pin44=PD10
Mcu.Pin45=PD14
Mcu.Pin46=PD15
Mcu.Pin47=PG2
Mcu.Pin48=PG4
Mcu.Pin49=PG5
Mcu.Pin42=PB13
Mcu.Pin43=PB14
Mcu.Pin44=PB15
Mcu.Pin45=PD8
Mcu.Pin46=PD9
Mcu.Pin47=PD10
Mcu.Pin48=PD14
Mcu.Pin49=PD15
Mcu.Pin5=PF0
Mcu.Pin50=PG6
Mcu.Pin51=PG7
Mcu.Pin52=PG8
Mcu.Pin53=PA9
Mcu.Pin54=PA10
Mcu.Pin55=PA13 (JTMS/SWDIO)
Mcu.Pin56=PH13
Mcu.Pin57=PH14
Mcu.Pin58=PH15
Mcu.Pin59=PI0
Mcu.Pin50=PG2
Mcu.Pin51=PG4
Mcu.Pin52=PG5
Mcu.Pin53=PG6
Mcu.Pin54=PG7
Mcu.Pin55=PG8
Mcu.Pin56=PA9
Mcu.Pin57=PA10
Mcu.Pin58=PA13 (JTMS/SWDIO)
Mcu.Pin59=PH13
Mcu.Pin6=PF1
Mcu.Pin60=PI1
Mcu.Pin61=PI2
Mcu.Pin62=PA14 (JTCK/SWCLK)
Mcu.Pin63=PD0
Mcu.Pin64=PD1
Mcu.Pin65=PG11
Mcu.Pin66=PG15
Mcu.Pin67=PB6
Mcu.Pin68=PE0
Mcu.Pin69=PE1
Mcu.Pin60=PH14
Mcu.Pin61=PH15
Mcu.Pin62=PI0
Mcu.Pin63=PI1
Mcu.Pin64=PI2
Mcu.Pin65=PA14 (JTCK/SWCLK)
Mcu.Pin66=PD0
Mcu.Pin67=PD1
Mcu.Pin68=PG11
Mcu.Pin69=PG15
Mcu.Pin7=PF2
Mcu.Pin70=PI4
Mcu.Pin71=PI5
Mcu.Pin72=PI6
Mcu.Pin73=PI7
Mcu.Pin74=VP_DMA2D_VS_DMA2D
Mcu.Pin75=VP_IWDG1_VS_IWDG
Mcu.Pin76=VP_RTC_VS_RTC_Activate
Mcu.Pin77=VP_SYS_VS_Systick
Mcu.Pin70=PB6
Mcu.Pin71=PE0
Mcu.Pin72=PE1
Mcu.Pin73=PI4
Mcu.Pin74=PI5
Mcu.Pin75=PI6
Mcu.Pin76=PI7
Mcu.Pin77=VP_DMA2D_VS_DMA2D
Mcu.Pin78=VP_IWDG1_VS_IWDG
Mcu.Pin79=VP_RTC_VS_RTC_Activate
Mcu.Pin8=PF3
Mcu.Pin80=VP_SYS_VS_Systick
Mcu.Pin9=PF4
Mcu.PinsNb=78
Mcu.PinsNb=81
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32H743IITx
MxCube.Version=5.2.1
MxDb.Version=DB.5.0.21
MxCube.Version=5.3.0
MxDb.Version=DB.5.0.30
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
......@@ -141,6 +145,21 @@ PA14\ (JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK
PA9.Locked=true
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB13.GPIOParameters=GPIO_Speed
PB13.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PB13.Locked=true
PB13.Mode=Full_Duplex_Master
PB13.Signal=SPI2_SCK
PB14.GPIOParameters=GPIO_Speed
PB14.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PB14.Locked=true
PB14.Mode=Full_Duplex_Master
PB14.Signal=SPI2_MISO
PB15.GPIOParameters=GPIO_Speed
PB15.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PB15.Locked=true
PB15.Mode=Full_Duplex_Master
PB15.Signal=SPI2_MOSI
PB2.GPIOParameters=GPIO_Speed
PB2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
PB2.Mode=Single Bank 1
......@@ -288,10 +307,10 @@ ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=false
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32H743IITx
ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.4.0
ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.5.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
......@@ -308,7 +327,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_FMC_Init-FMC-false-HAL-true,6-MX_DMA2D_Init-DMA2D-false-HAL-true,7-MX_LTDC_Init-LTDC-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_IWDG1_Init-IWDG1-false-HAL-true,10-MX_QUADSPI_Init-QUADSPI-false-HAL-true
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_FMC_Init-FMC-false-HAL-true,6-MX_DMA2D_Init-DMA2D-false-HAL-true,7-MX_LTDC_Init-LTDC-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_IWDG1_Init-IWDG1-false-HAL-true,10-MX_QUADSPI_Init-QUADSPI-false-HAL-true,11-MX_SPI2_Init-SPI2-false-HAL-true
RCC.ADCFreq_Value=50390625
RCC.AHB12Freq_Value=200000000
RCC.AHB4Freq_Value=200000000
......@@ -466,6 +485,12 @@ SH.FMC_SDNRAS.0=FMC_SDNRAS,13b-sda1
SH.FMC_SDNRAS.ConfNb=1
SH.FMC_SDNWE.0=FMC_SDNWE,13b-sda1
SH.FMC_SDNWE.ConfNb=1
SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_4
SPI2.CalculateBaudRate=100.0 MBits/s
SPI2.Direction=SPI_DIRECTION_2LINES
SPI2.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate
SPI2.Mode=SPI_MODE_MASTER
SPI2.VirtualType=VM_MASTER
USART1.IPParameters=VirtualMode-Asynchronous
USART1.VirtualMode-Asynchronous=VM_ASYNC
VP_DMA2D_VS_DMA2D.Mode=DMA2D_Activate
......
bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h
浏览文件 @ f117df84
......@@ -64,7 +64,7 @@
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
/* #define HAL_SWPMI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
......@@ -78,12 +78,12 @@
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_JPEG_MODULE_ENABLED */
/* #define HAL_MDIOS_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_MDMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
......
bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/main.c
浏览文件 @ f117df84
......@@ -73,6 +73,8 @@ QSPI_HandleTypeDef hqspi;
RTC_HandleTypeDef hrtc;
SPI_HandleTypeDef hspi2;
UART_HandleTypeDef huart1;
SDRAM_HandleTypeDef hsdram1;
......@@ -91,6 +93,7 @@ static void MX_LTDC_Init(void);
static void MX_RTC_Init(void);
static void MX_IWDG1_Init(void);
static void MX_QUADSPI_Init(void);
static void MX_SPI2_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
......@@ -142,6 +145,7 @@ int main(void)
MX_RTC_Init();
MX_IWDG1_Init();
MX_QUADSPI_Init();
MX_SPI2_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
......@@ -221,8 +225,8 @@ void SystemClock_Config(void)
Error_Handler();
}
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_LTDC
|RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_QSPI
|RCC_PERIPHCLK_FMC;
|RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_SPI2
|RCC_PERIPHCLK_QSPI|RCC_PERIPHCLK_FMC;
PeriphClkInitStruct.PLL3.PLL3M = 5;
PeriphClkInitStruct.PLL3.PLL3N = 160;
PeriphClkInitStruct.PLL3.PLL3P = 2;
......@@ -233,6 +237,7 @@ void SystemClock_Config(void)
PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK;
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK;
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
......@@ -457,6 +462,54 @@ static void MX_RTC_Init(void)
}
/**
* @brief SPI2 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI2_Init(void)
{
/* USER CODE BEGIN SPI2_Init 0 */
/* USER CODE END SPI2_Init 0 */
/* USER CODE BEGIN SPI2_Init 1 */
/* USER CODE END SPI2_Init 1 */
/* SPI2 parameter configuration*/
hspi2.Instance = SPI2;
hspi2.Init.Mode = SPI_MODE_MASTER;
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi2.Init.NSS = SPI_NSS_SOFT;
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi2.Init.CRCPolynomial = 0x0;
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
hspi2.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
hspi2.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
hspi2.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
hspi2.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
hspi2.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
hspi2.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
hspi2.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
hspi2.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
hspi2.Init.IOSwap = SPI_IO_SWAP_DISABLE;
if (HAL_SPI_Init(&hspi2) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI2_Init 2 */
/* USER CODE END SPI2_Init 2 */
}
/**
* @brief USART1 Initialization Function
* @param None
......
bsp/stm32/stm32h743-atk-apollo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
浏览文件 @ f117df84
......@@ -418,6 +418,73 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
/* USER CODE END SPI2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**SPI2 GPIO Configuration
PB13 ------> SPI2_SCK
PB14 ------> SPI2_MISO
PB15 ------> SPI2_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN SPI2_MspInit 1 */
/* USER CODE END SPI2_MspInit 1 */
}
}
/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */
/* USER CODE END SPI2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI2_CLK_DISABLE();
/**SPI2 GPIO Configuration
PB13 ------> SPI2_SCK
PB14 ------> SPI2_MISO
PB15 ------> SPI2_MOSI
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
/* USER CODE BEGIN SPI2_MspDeInit 1 */
/* USER CODE END SPI2_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
......
bsp/stm32/stm32h743-atk-apollo/board/Kconfig
浏览文件 @ f117df84
......@@ -54,6 +54,16 @@ menu "On-chip Peripheral Drivers"
bool
default n
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
endif
config BSP_USING_QSPI
bool "Enable QSPI BUS"
select RT_USING_QSPI
......
bsp/stm32/stm32h743-atk-apollo/board/board.c
浏览文件 @ f117df84
......@@ -70,8 +70,8 @@ void SystemClock_Config(void)
Error_Handler();
}
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_LTDC
|RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_QSPI
|RCC_PERIPHCLK_FMC;
|RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_SPI2
|RCC_PERIPHCLK_QSPI|RCC_PERIPHCLK_FMC;
PeriphClkInitStruct.PLL3.PLL3M = 5;
PeriphClkInitStruct.PLL3.PLL3N = 160;
PeriphClkInitStruct.PLL3.PLL3P = 2;
......@@ -82,6 +82,7 @@ void SystemClock_Config(void)
PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
PeriphClkInitStruct.FmcClockSelection = RCC_FMCCLKSOURCE_D1HCLK;
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK;
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或