Skip to content

R
rt-thread

宁楠萍 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 d1a4f2e8 编写于 作者: A Arda
浏览文件
操作

Merge pull request #1 from RT-Thread/master 

pull rt-thread master
上级 f74d7f16 0eb35940
展开全部 隐藏空白更改
内联 并排
Showing with 666 addition and 617 deletion
.travis.yml
浏览文件 @ d1a4f2e8
......@@ -51,7 +51,8 @@ env:
- RTT_BSP='taihu' RTT_TOOL_CHAIN='sourcery-ppc'
# - RTT_BSP='upd70f3454' # iar
# - RTT_BSP='x86' # x86
- RTT_BSP='xplorer4330/m4' RTT_TOOL_CHAIN='sourcery-arm'
- RTT_BSP='xplorer4330/M4' RTT_TOOL_CHAIN='sourcery-arm'
- RTT_BSP='lpc43xx/M4' RTT_TOOL_CHAIN='sourcery-arm'
- RTT_BSP='lpc408x' RTT_TOOL_CHAIN='sourcery-arm'
- RTT_BSP='beaglebone' RTT_TOOL_CHAIN='sourcery-arm'
- RTT_BSP='zynq7000' RTT_TOOL_CHAIN='sourcery-arm'
......
bsp/at91sam9260/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -138,8 +138,6 @@ void rt_init_thread_entry(void* parameter)
/* register ethernetif device */
eth_system_device_init();
rt_hw_macb_init();
/* re-init device driver */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
}
......
bsp/at91sam9260/drivers/usart.c
浏览文件 @ d1a4f2e8
......@@ -95,7 +95,7 @@ void rt_at91_usart_handler(int vector, void *param)
return;
}
rt_interrupt_enter();
rt_hw_serial_isr(dev);
rt_hw_serial_isr((struct rt_serial_device *)dev, RT_SERIAL_EVENT_RX_IND);
rt_interrupt_leave();
}
......@@ -231,7 +231,6 @@ static const struct rt_uart_ops at91_usart_ops =
#if defined(RT_USING_DBGU)
static struct rt_serial_device serial_dbgu;
static struct serial_ringbuffer dbgu_int_rx;
struct at91_uart dbgu = {
DBGU,
AT91_ID_SYS
......@@ -241,7 +240,6 @@ struct at91_uart dbgu = {
#if defined(RT_USING_UART0)
static struct rt_serial_device serial0;
static struct serial_ringbuffer uart0_int_rx;
struct at91_uart uart0 = {
UART0,
AT91SAM9260_ID_US0
......@@ -250,7 +248,6 @@ struct at91_uart uart0 = {
#if defined(RT_USING_UART1)
static struct rt_serial_device serial1;
static struct serial_ringbuffer uart1_int_rx;
struct at91_uart uart1 = {
UART1,
AT91SAM9260_ID_US1
......@@ -259,7 +256,6 @@ struct at91_uart uart1 = {
#if defined(RT_USING_UART2)
static struct rt_serial_device serial2;
static struct serial_ringbuffer uart2_int_rx;
struct at91_uart uart2 = {
UART2,
AT91SAM9260_ID_US2
......@@ -268,7 +264,6 @@ struct at91_uart uart2 = {
#if defined(RT_USING_UART3)
static struct rt_serial_device serial3;
static struct serial_ringbuffer uart3_int_rx;
struct at91_uart uart3 = {
UART3,
AT91SAM9260_ID_US3
......@@ -337,29 +332,29 @@ void rt_hw_uart_init(void)
#if defined(RT_USING_DBGU)
serial_dbgu.ops = &at91_usart_ops;
serial_dbgu.int_rx = &dbgu_int_rx;
serial_dbgu.config.baud_rate = BAUD_RATE_115200;
serial_dbgu.config.bit_order = BIT_ORDER_LSB;
serial_dbgu.config.data_bits = DATA_BITS_8;
serial_dbgu.config.parity = PARITY_NONE;
serial_dbgu.config.stop_bits = STOP_BITS_1;
serial_dbgu.config.invert = NRZ_NORMAL;
serial_dbgu.config.bufsz = RT_SERIAL_RB_BUFSZ;
/* register vcom device */
rt_hw_serial_register(&serial_dbgu, "dbgu",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&dbgu);
#endif
#if defined(RT_USING_UART0)
serial0.ops = &at91_usart_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config.baud_rate = BAUD_RATE_115200;
serial0.config.bit_order = BIT_ORDER_LSB;
serial0.config.data_bits = DATA_BITS_8;
serial0.config.parity = PARITY_NONE;
serial0.config.stop_bits = STOP_BITS_1;
serial0.config.invert = NRZ_NORMAL;
serial0.config.bufsz = RT_SERIAL_RB_BUFSZ;
/* register vcom device */
rt_hw_serial_register(&serial0, "uart0",
......@@ -379,10 +374,11 @@ void rt_hw_uart_init(void)
serial1.config.parity = PARITY_NONE;
serial1.config.stop_bits = STOP_BITS_1;
serial1.config.invert = NRZ_NORMAL;
serial1.config.bufsz = RT_SERIAL_RB_BUFSZ;
/* register vcom device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart1);
rt_hw_interrupt_install(uart1.irq, rt_at91_usart_handler,
(void *)&(serial1.parent), "UART1");
......@@ -391,17 +387,17 @@ void rt_hw_uart_init(void)
#if defined(RT_USING_UART2)
serial2.ops = &at91_usart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config.baud_rate = BAUD_RATE_115200;
serial2.config.bit_order = BIT_ORDER_LSB;
serial2.config.data_bits = DATA_BITS_8;
serial2.config.parity = PARITY_NONE;
serial2.config.stop_bits = STOP_BITS_1;
serial2.config.invert = NRZ_NORMAL;
serial2.config.bufsz = RT_SERIAL_RB_BUFSZ;
/* register vcom device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart2);
rt_hw_interrupt_install(uart2.irq, rt_at91_usart_handler,
(void *)&(serial2.parent), "UART2");
......@@ -410,17 +406,17 @@ void rt_hw_uart_init(void)
#if defined(RT_USING_UART3)
serial3.ops = &at91_usart_ops;
serial3.int_rx = &uart3_int_rx;
serial3.config.baud_rate = BAUD_RATE_115200;
serial3.config.bit_order = BIT_ORDER_LSB;
serial3.config.data_bits = DATA_BITS_8;
serial3.config.parity = PARITY_NONE;
serial3.config.stop_bits = STOP_BITS_1;
serial3.config.invert = NRZ_NORMAL;
serial3.config.bufsz = RT_SERIAL_RB_BUFSZ;
/* register vcom device */
rt_hw_serial_register(&serial3, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart3);
rt_hw_interrupt_install(uart3.irq, rt_at91_usart_handler,
(void *)&(serial3.parent), "UART3");
......
bsp/avr32uc3b0/startup.c
浏览文件 @ d1a4f2e8
......@@ -39,7 +39,6 @@ int main(void)
#endif
rt_system_scheduler_init();
rt_device_init_all();
rt_application_init();
#ifdef RT_USING_FINSH
......
bsp/beaglebone/drivers/serial.c
浏览文件 @ d1a4f2e8
......@@ -41,7 +41,7 @@ static void am33xx_uart_isr(int irqno, void* param)
if ((iir & (0x02 << 1)) || (iir & (0x6 << 1)))
{
rt_hw_serial_isr(serial);
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
}
......@@ -165,7 +165,6 @@ static const struct rt_uart_ops am33xx_uart_ops =
/* UART device driver structure */
#ifdef RT_USING_UART0
struct serial_ringbuffer uart0_int_rx;
struct am33xx_uart uart0 =
{
UART0_BASE,
......@@ -175,7 +174,6 @@ struct rt_serial_device serial0;
#endif
#ifdef RT_USING_UART1
struct serial_ringbuffer uart1_int_rx;
struct am33xx_uart uart1 =
{
UART1_BASE,
......@@ -185,7 +183,6 @@ struct rt_serial_device serial1;
#endif
#ifdef RT_USING_UART2
struct serial_ringbuffer uart2_int_rx;
struct am33xx_uart uart2 =
{
UART2_BASE,
......@@ -195,7 +192,6 @@ struct rt_serial_device serial2;
#endif
#ifdef RT_USING_UART3
struct serial_ringbuffer uart3_int_rx;
struct am33xx_uart uart3 =
{
UART3_BASE,
......@@ -205,7 +201,6 @@ struct rt_serial_device serial3;
#endif
#ifdef RT_USING_UART4
struct serial_ringbuffer uart4_int_rx;
struct am33xx_uart uart4 =
{
UART4_BASE,
......@@ -215,7 +210,6 @@ struct rt_serial_device serial4;
#endif
#ifdef RT_USING_UART5
struct serial_ringbuffer uart5_int_rx;
struct am33xx_uart uart5 =
{
UART5_BASE,
......@@ -359,8 +353,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &am33xx_uart_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config = config;
/* enable RX interrupt */
UART_IER_REG(uart0.base) = 0x01;
......@@ -370,7 +365,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart0.irq);
/* register UART0 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart0);
#endif
......@@ -381,8 +376,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial1.ops = &am33xx_uart_ops;
serial1.int_rx = &uart1_int_rx;
serial1.config = config;
/* enable RX interrupt */
UART_IER_REG(uart1.base) = 0x01;
......@@ -392,7 +388,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart1.irq);
/* register UART0 device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart1);
#endif
......@@ -403,8 +399,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &am33xx_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
/* enable RX interrupt */
UART_IER_REG(uart2.base) = 0x01;
......@@ -414,7 +411,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart2.irq);
/* register UART2 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart2);
#endif
......@@ -425,8 +422,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial3.ops = &am33xx_uart_ops;
serial3.int_rx = &uart_3_int_rx;
serial3.config = config;
/* enable RX interrupt */
UART_IER_REG(uart3.base) = 0x01;
......@@ -436,7 +434,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart3.irq);
/* register UART3 device */
rt_hw_serial_register(&serial3, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart3);
#endif
......@@ -447,9 +445,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial4.ops = &am33xx_uart_ops;
serial4.int_rx = &uart4_int_rx;
serial4.config = config;
/* enable RX interrupt */
UART_IER_REG(uart4.base) = 0x01;
......@@ -459,7 +457,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart4.irq);
/* register UART4 device */
rt_hw_serial_register(&serial4, "uart4",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart4);
#endif
......@@ -470,9 +468,9 @@ int rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial5.ops = &am33xx_uart_ops;
serial5.int_rx = &uart5_int_rx;
serial5.config = config;
/* enable RX interrupt */
UART_IER_REG(uart5.base) = 0x01;
......@@ -482,7 +480,7 @@ int rt_hw_serial_init(void)
rt_hw_interrupt_mask(uart5.irq);
/* register UART4 device */
rt_hw_serial_register(&serial5, "uart5",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&uart5);
#endif
......
bsp/bf533/startup.c
浏览文件 @ d1a4f2e8
......@@ -62,9 +62,6 @@ void rtthread_startup(void)
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
&uart0);
/* init all device */
rt_device_init_all();
rt_console_set_device("uart0");
#endif
......
bsp/efm32/startup.c
浏览文件 @ d1a4f2e8
......@@ -114,9 +114,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
/* init all devices */
rt_device_init_all();
/* init finsh */
#ifdef RT_USING_FINSH
finsh_system_init();
......
bsp/frdm-k64f/board/drv_uart.c
浏览文件 @ d1a4f2e8
......@@ -16,7 +16,6 @@
#include "drv_uart.h"
static struct rt_serial_device _k64_serial; //abstracted serial for RTT
static struct serial_ringbuffer _k64_int_rx; //UART send buffer area
struct k64_serial_device
{
......@@ -231,7 +230,7 @@ static const struct rt_uart_ops _k64_ops =
void UART0_RX_TX_IRQHandler(void)
{
rt_interrupt_enter();
rt_hw_serial_isr((struct rt_serial_device*)&_k64_serial);
rt_hw_serial_isr((struct rt_serial_device*)&_k64_serial, RT_SERIAL_EVENT_RX_IND);
rt_interrupt_leave();
}
......@@ -247,9 +246,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
_k64_serial.ops = &_k64_ops;
_k64_serial.int_rx = &_k64_int_rx;
_k64_serial.config = config;
rt_hw_serial_register(&_k64_serial, "uart0",
......
bsp/lm3s8962/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -118,8 +118,6 @@ void rtthread_startup(void)
/* init sd card device */
rt_hw_sdcard_init();
#endif
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/lm3s9b9x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -118,8 +118,6 @@ void rtthread_startup(void)
/* init sd card device */
rt_hw_sdcard_init();
#endif
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/lm4f232/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -118,8 +118,6 @@ void rtthread_startup(void)
/* init sd card device */
rt_hw_sdcard_init();
#endif
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/lpc176x/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -19,14 +19,20 @@
#include <rtthread.h>
#include "platform.h"
#ifdef RT_USING_COMPONENTS_INIT
#include <components.h>
#endif
#ifdef RT_USING_LWIP
#include <emac.h>
#include <netif/ethernetif.h>
extern int lwip_system_init(void);
#endif
#ifdef RT_USING_DFS
#include <dfs_fs.h>
#include <sd.h>
#endif
#ifdef RT_USING_FINSH
#include <shell.h>
#include <finsh.h>
#endif
/* thread phase init */
......@@ -38,21 +44,39 @@ void rt_init_thread_entry(void *parameter)
#ifdef RT_USING_LWIP
/* register Ethernet interface device */
lpc17xx_emac_hw_init();
#endif
#ifdef RT_USING_COMPONENTS_INIT
/* initialization RT-Thread Components */
rt_components_init();
/* initialize lwip stack */
/* register ethernetif device */
eth_system_device_init();
/* initialize lwip system */
lwip_system_init();
rt_kprintf("TCP/IP initialized!\n");
#endif
/* Filesystem Initialization */
#ifdef RT_USING_DFS
rt_hw_sdcard_init();
/* initialize the device file system */
dfs_init();
#ifdef RT_USING_DFS_ELMFAT
/* initialize the elm chan FatFS file system*/
elm_init();
#endif
/* mount sd card fat partition 1 as root directory */
if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
rt_kprintf("File System initialized!\n");
else
rt_kprintf("File System init failed!\n");
#endif
#ifdef RT_USING_FINSH
/* initialize finsh */
finsh_system_init();
#endif
}
int rt_application_init()
......
bsp/lpc176x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -16,20 +16,13 @@
#include <rthw.h>
#include <rtthread.h>
#include "LPC17xx.h"
#include "board.h"
#ifdef RT_USING_DFS
#include "sd.h"
#endif
/**
* @addtogroup LPC17
* @addtogroup LPC176x
*/
/*@{*/
extern int rt_application_init(void);
#include <board.h>
extern int rt_application_init(void);
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
......@@ -84,14 +77,6 @@ void rtthread_startup(void)
/* initialize scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
#ifdef RT_USING_DFS
rt_hw_sdcard_init();
#endif
/* initialize all device */
rt_device_init_all();
#endif
/* initialize application */
rt_application_init();
......
bsp/lpc176x/rtconfig.h
浏览文件 @ d1a4f2e8
......@@ -78,7 +78,7 @@
// </section>
// <bool name="RT_USING_COMPONENTS_INIT" description="Using RT-Thread components initialization" default="true" />
#define RT_USING_COMPONENTS_INIT
// #define RT_USING_COMPONENTS_INIT
// <section name="RT_USING_FINSH" description="Using finsh as shell, which is a C-Express shell" default="true" >
#define RT_USING_FINSH
// <bool name="FINSH_USING_SYMTAB" description="Using symbol table in finsh shell" default="true" />
......
bsp/lpc178x/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -65,8 +65,6 @@ void rt_init_thread_entry(void *parameter)
/* register ethernetif device */
lpc17xx_emac_hw_init();
/* init all device */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
......@@ -78,13 +76,11 @@ void rt_init_thread_entry(void *parameter)
{
extern void rtgui_system_server_init(void);
extern void application_init(void);
rt_device_t lcd;
/* init lcd */
rt_hw_lcd_init();
/* re-init device driver */
rt_device_init_all();
/* find lcd device */
lcd = rt_device_find("lcd");
......
bsp/lpc2148/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -100,9 +100,6 @@ void rtthread_startup(void)
/* init hardware serial device */
rt_hw_serial_init();
/*init all registed devices*/
rt_device_init_all();
#endif
/* init application */
......
bsp/lpc408x/drivers/drv_uart.c
浏览文件 @ d1a4f2e8
......@@ -118,7 +118,6 @@ static const struct rt_uart_ops lpc_uart_ops =
#if defined(RT_USING_UART0)
/* UART0 device driver structure */
struct serial_ringbuffer uart0_int_rx;
struct lpc_uart uart0 =
{
UART_0,
......@@ -158,7 +157,7 @@ void UART0_IRQHandler(void)
// Receive Data Available or Character time-out
if ((tmp == UART_IIR_INTID_RDA) || (tmp == UART_IIR_INTID_CTI))
{
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
......@@ -167,7 +166,6 @@ void UART0_IRQHandler(void)
#endif
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct lpc_uart uart2 =
{
UART_2,
......@@ -207,7 +205,7 @@ void UART2_IRQHandler(void)
// Receive Data Available or Character time-out
if ((tmp == UART_IIR_INTID_RDA) || (tmp == UART_IIR_INTID_CTI))
{
rt_hw_serial_isr(&serial2);
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
}
/* leave interrupt */
......@@ -227,9 +225,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &lpc_uart_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config = config;
/*
......@@ -259,9 +257,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &lpc_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
/*
......
bsp/lpc43xx/drivers/drv_uart.c
浏览文件 @ d1a4f2e8
......@@ -97,7 +97,6 @@ static const struct rt_uart_ops lpc_uart_ops =
#if defined(RT_USING_UART0)
/* UART0 device driver structure */
struct serial_ringbuffer uart0_int_rx;
struct lpc_uart uart0 =
{
LPC_USART0,
......@@ -136,7 +135,7 @@ void UART0_IRQHandler(void)
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
......@@ -150,7 +149,6 @@ void UART0_IRQHandler(void)
#endif
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct lpc_uart uart2 =
{
LPC_USART2,
......@@ -189,7 +187,7 @@ void UART2_IRQHandler(void)
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
......@@ -214,9 +212,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &lpc_uart_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config = config;
/* Enable GPIO register interface clock */
......@@ -256,7 +254,7 @@ void rt_hw_uart_init(void)
/* register UART1 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
#ifdef RT_USING_UART2
......@@ -267,9 +265,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &lpc_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
/* Enable GPIO register interface clock */
......@@ -309,7 +307,7 @@ void rt_hw_uart_init(void)
/* register UART1 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
}
bsp/ls1bdev/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -33,14 +33,11 @@ void rt_init_thread_entry(void *parameter)
/* init Display Controller */
rt_hw_dc_init();
/* re-init device driver */
rt_device_init_all();
/* find Display Controller device */
dc = rt_device_find("dc");
/* set Display Controller device as rtgui graphic driver */
/* set Display Controller device as rtgui graphic driver */
rtgui_graphic_set_device(dc);
}
#endif
......@@ -59,7 +56,7 @@ int rt_application_init(void)
tid = rt_thread_create("init",
rt_init_thread_entry, RT_NULL,
4096, 8, 20);
if (tid != RT_NULL)
if (tid != RT_NULL)
rt_thread_startup(tid);
return 0;
......
bsp/ls1bdev/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -64,11 +64,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......@@ -85,7 +80,7 @@ void rtthread_startup(void)
rt_system_scheduler_start();
/* never reach here */
return;
return ;
}
/*@}*/
bsp/ls1bdev/ls1b_ram.lds
浏览文件 @ d1a4f2e8
......@@ -50,7 +50,7 @@ SECTIONS
. = ALIGN(4);
__rt_init_start = .;
KEEP(*(SORT(.rti_fn*)))
__rt_init_end = .;
__rt_init_end = .;
. = ALIGN(4);
}
......
bsp/m16c62p/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -68,11 +68,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/mb9bf500r/application.c
浏览文件 @ d1a4f2e8
......@@ -44,10 +44,7 @@ void rt_init_thread_entry(void *parameter)
rt_hw_adc_init();
rt_hw_lcd_init();
rt_hw_cpu_init();
/* re-init device driver */
rt_device_init_all();
#ifdef RT_USING_RTGUI
extern void rtgui_system_server_init(void);
......
bsp/mb9bf506r/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -59,13 +59,9 @@ void rtthread_startup(void)
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
#ifdef RT_USING_DFS
#ifdef RT_USING_DFS_UFFS
#if defined(RT_USING_DFS) && defined(RT_USING_DFS_UFFS)
rt_hw_nand_init();
#endif
#endif
/* initialize all device */
rt_device_init_all();
#endif
/* initialize application */
......@@ -91,7 +87,7 @@ int main(void)
{
/* disable interrupt first */
rt_hw_interrupt_disable();
/* startup RT-Thread RTOS */
rtthread_startup();
......
bsp/mb9bf506r/drivers/fm3_uart.c
浏览文件 @ d1a4f2e8
......@@ -20,7 +20,6 @@
#if (defined(RT_USING_UART0_0) || defined(RT_USING_UART0_1))
/* UART0 device driver structure */
struct serial_ringbuffer uart0_int_rx;
struct uart03_device uart0 =
{
FM3_MFS0_UART,
......@@ -33,7 +32,7 @@ void MFS0RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -41,7 +40,6 @@ void MFS0RX_IRQHandler(void)
#if (defined(RT_USING_UART1_0) || defined(RT_USING_UART1_1))
/* UART1 device driver structure */
struct serial_ringbuffer uart1_int_rx;
struct uart03_device uart1 =
{
FM3_MFS1_UART,
......@@ -54,7 +52,7 @@ void MFS1RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial1);
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -62,7 +60,6 @@ void MFS1RX_IRQHandler(void)
#if (defined(RT_USING_UART2_0) || defined(RT_USING_UART2_1) || defined(RT_USING_UART2_2))
/* UART2 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct uart03_device uart2 =
{
FM3_MFS2_UART,
......@@ -75,7 +72,7 @@ void MFS2RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial2);
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -83,7 +80,6 @@ void MFS2RX_IRQHandler(void)
#if (defined(RT_USING_UART3_0) || defined(RT_USING_UART3_1) || defined(RT_USING_UART3_2))
/* UART3 device driver structure */
struct serial_ringbuffer uart3_int_rx;
struct uart03_device uart3 =
{
FM3_MFS3_UART,
......@@ -96,7 +92,7 @@ void MFS3RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial3);
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -104,7 +100,6 @@ void MFS3RX_IRQHandler(void)
#if (defined(RT_USING_UART4_0) || defined(RT_USING_UART4_1) || defined(RT_USING_UART4_2))
/* UART4 device driver structure */
struct serial_ringbuffer uart4_int_rx;
struct uart47_device uart4 =
{
FM3_MFS4_UART,
......@@ -118,7 +113,7 @@ void MFS4RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial4);
rt_hw_serial_isr(&serial4, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -126,7 +121,6 @@ void MFS4RX_IRQHandler(void)
#if (defined(RT_USING_UART5_0) || defined(RT_USING_UART5_1) || defined(RT_USING_UART5_2))
/* UART5 device driver structure */
struct serial_ringbuffer uart5_int_rx;
struct uart47_device uart5 =
{
FM3_MFS5_UART,
......@@ -140,7 +134,7 @@ void MFS5RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial5);
rt_hw_serial_isr(&serial5, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -148,7 +142,6 @@ void MFS5RX_IRQHandler(void)
#if (defined(RT_USING_UART6_0) || defined(RT_USING_UART6_1))
/* UART6 device driver structure */
struct serial_ringbuffer uart6_int_rx;
struct uart47_device uart6 =
{
FM3_MFS6_UART,
......@@ -162,7 +155,7 @@ void MFS6RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial6);
rt_hw_serial_isr(&serial6, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -170,7 +163,6 @@ void MFS6RX_IRQHandler(void)
#if (defined(RT_USING_UART7_0) || defined(RT_USING_UART7_1))
/* UART7 device driver structure */
struct serial_ringbuffer uart7_int_rx;
struct uart47_device uart7 =
{
FM3_MFS7_UART,
......@@ -184,7 +176,7 @@ void MFS7RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_hw_serial_isr(&serial7);
rt_hw_serial_isr(&serial7, RT_SERIAL_EVENT_RX_IND);
/* leave interrupt */
rt_interrupt_leave();
}
......@@ -796,9 +788,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &uart03_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config = config;
/* register UART0 device */
......@@ -814,9 +806,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial1.ops = &uart03_ops;
serial1.int_rx = &uart1_int_rx;
serial1.config = config;
/* register UART1 device */
......@@ -833,9 +825,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &uart03_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
/* register UART2 device */
......@@ -852,9 +844,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial3.ops = &uart03_ops;
serial3.int_rx = &uart3_int_rx;
serial3.config = config;
/* register UART3 device */
......@@ -871,9 +863,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial4.ops = &uart47_ops;
serial4.int_rx = &uart4_int_rx;
serial4.config = config;
/* register UART4 device */
......@@ -890,9 +882,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial5.ops = &uart47_ops;
serial5.int_rx = &uart5_int_rx;
serial5.config = config;
/* register UART5 device */
......@@ -909,9 +901,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial6.ops = &uart47_ops;
serial6.int_rx = &uart6_int_rx;
serial6.config = config;
/* register UART6 device */
......@@ -928,9 +920,9 @@ void rt_hw_serial_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial7.ops = &uart47_ops;
serial7.int_rx = &uart7_int_rx;
serial7.config = config;
/* register UART7 device */
......
bsp/microblaze/startup.c
浏览文件 @ d1a4f2e8
......@@ -86,8 +86,6 @@ void rtthread_startup(void)
#ifdef RT_USING_DEVICE
/* init hardware serial device */
rt_hw_serial_init();
/* init all device */
rt_device_init_all();
#endif
/* init application */
......
bsp/mini2440/application.c
浏览文件 @ d1a4f2e8
......@@ -151,9 +151,6 @@ void rt_init_thread_entry(void *parameter)
/* init keypad */
rt_hw_key_init();
/* re-init device driver */
rt_device_init_all();
/* find lcd device */
lcd = rt_device_find("lcd");
......@@ -175,9 +172,6 @@ void rt_init_thread_entry(void *parameter)
/* register ethernetif device */
rt_hw_dm9000_init();
/* re-init device driver */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
rt_kprintf("TCP/IP initialized!\n");
......@@ -197,9 +191,6 @@ void rt_init_thread_entry(void *parameter)
/* init keypad */
rt_hw_key_init();
/* re-init device driver */
rt_device_init_all();
/* create ftk thread */
ftk_thread = rt_thread_create("ftk",
rt_ftk_thread_entry, RT_NULL,
......
bsp/mini2440/startup.c
浏览文件 @ d1a4f2e8
......@@ -126,9 +126,6 @@ void rtthread_startup(void)
/* rtc init */
rt_hw_rtc_init();
/*init all registed devices */
rt_device_init_all();
#endif
/* init application */
......
bsp/mini4020/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -79,9 +79,6 @@ void rtthread_startup()
eth_system_device_init();
rt_hw_dm9161_init();
#endif
/*init all registed devices */
rt_device_init_all();
#endif
/* init application */
......@@ -108,10 +105,8 @@ void rtthread_startup()
int main()
{
rt_uint32_t UNUSED level;
/* disable interrupt first */
level = rt_hw_interrupt_disable();
rt_hw_interrupt_disable();
/* startup RT-Thread RTOS */
rtthread_startup();
......
bsp/realview-a8/drivers/serial.c
浏览文件 @ d1a4f2e8
......@@ -58,7 +58,7 @@ static void rt_hw_uart_isr(int irqno, void *param)
{
struct rt_serial_device *serial = (struct rt_serial_device *)param;
rt_hw_serial_isr(serial);
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
......@@ -131,7 +131,6 @@ static const struct rt_uart_ops _uart_ops =
#ifdef RT_USING_UART0
/* UART device driver structure */
static struct serial_ringbuffer _uart0_int_rx;
static struct hw_uart_device _uart0_device =
{
REALVIEW_UART0_BASE,
......@@ -142,7 +141,6 @@ static struct rt_serial_device _serial0;
#ifdef RT_USING_UART1
/* UART1 device driver structure */
static struct serial_ringbuffer _uart1_int_rx;
static struct hw_uart_device _uart1_device =
{
REALVIEW_UART1_BASE,
......@@ -167,7 +165,8 @@ int rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
#ifdef RT_USING_UART0
uart = &_uart0_device;
#ifdef RT_USING_VMM
......@@ -175,12 +174,11 @@ int rt_hw_uart_init(void)
#endif
_serial0.ops = &_uart_ops;
_serial0.int_rx = &_uart0_int_rx;
_serial0.config = config;
/* register UART1 device */
rt_hw_serial_register(&_serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
/* enable Rx and Tx of UART */
UART_CR(uart->hw_base) = (1 << 0) | (1 << 8) | (1 << 9);
......@@ -192,12 +190,11 @@ int rt_hw_uart_init(void)
uart->hw_base = vmm_find_iomap("UART1");
#endif
_serial1.ops = &_uart_ops;
_serial1.int_rx = &_uart1_int_rx;
_serial1.config = config;
/* register UART1 device */
rt_hw_serial_register(&_serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, uart);
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
/* enable Rx and Tx of UART */
UART_CR(uart->hw_base) = (1 << 0) | (1 << 8) | (1 << 9);
#endif
......
bsp/rm48x50/drivers/drv_uart.c
浏览文件 @ d1a4f2e8
......@@ -178,11 +178,10 @@ static const struct rt_uart_ops _sci_ops =
static void _irq_wrapper(int vector, void *param)
{
rt_hw_serial_isr((struct rt_serial_device*)param);
rt_hw_serial_isr((struct rt_serial_device*)param, RT_SERIAL_EVENT_RX_IND);
}
static struct rt_serial_device _sci2_serial;
static struct serial_ringbuffer _sci2_int_rx;
void rt_hw_uart_init(void)
{
......@@ -195,9 +194,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
_sci2_serial.ops = &_sci_ops;
_sci2_serial.int_rx = &_sci2_int_rx;
_sci2_serial.config = config;
rt_hw_serial_register(&_sci2_serial, "sci2",
......@@ -208,3 +207,4 @@ void rt_hw_uart_init(void)
rt_hw_interrupt_install(SCI_INT_VEC, _irq_wrapper, &_sci2_serial, "sci2");
rt_hw_interrupt_umask(SCI_INT_VEC);
}
bsp/sam7x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -116,9 +116,6 @@ void rtthread_startup(void)
#ifdef RT_USING_DFS
rt_hw_sdcard_init();
#endif
/*init all registed devices*/
rt_device_init_all();
#endif
/* init application */
......
bsp/sep6200/application/startup.c
浏览文件 @ d1a4f2e8
......@@ -78,20 +78,6 @@ void rtthread_startup()
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
#ifdef RT_USING_DFS
/* Not implemented */
#endif
#ifdef RT_USING_LWIP
/* Not implemented */
#endif
/*init all registed devices */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/simulator/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -58,10 +58,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
/* init all device */
#ifdef RT_USING_DEVICE
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/stm32f0x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -86,11 +86,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/stm32f0x/drivers/usart.c
浏览文件 @ d1a4f2e8
......@@ -134,7 +134,6 @@ static const struct rt_uart_ops stm32_uart_ops =
#if defined(RT_USING_UART1)
/* UART1 device driver structure */
struct serial_ringbuffer uart1_int_rx;
struct stm32_uart uart1 =
{
USART1,
......@@ -152,7 +151,7 @@ void USART1_IRQHandler(void)
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial1);
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
......@@ -169,7 +168,6 @@ void USART1_IRQHandler(void)
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct stm32_uart uart2 =
{
USART2,
......@@ -187,7 +185,7 @@ void USART2_IRQHandler(void)
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial2);
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
......@@ -281,14 +279,13 @@ void rt_hw_usart_init(void)
config.baud_rate = BAUD_RATE_115200;
serial1.ops = &stm32_uart_ops;
serial1.int_rx = &uart1_int_rx;
serial1.config = config;
NVIC_Configuration(&uart1);
/* register UART1 device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
......@@ -297,7 +294,6 @@ void rt_hw_usart_init(void)
config.baud_rate = BAUD_RATE_115200;
serial2.ops = &stm32_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
NVIC_Configuration(&uart2);
......
bsp/stm32f107/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -22,11 +22,20 @@
#ifdef RT_USING_DFS
#include <dfs_fs.h>
#include <dfs_init.h>
#include <dfs_elm.h>
#endif
#ifdef RT_USING_COMPONENTS_INIT
#include <components.h>
#endif /* RT_USING_COMPONENTS_INIT */
#ifdef RT_USING_LWIP
#include <stm32_eth.h>
#include <netif/ethernetif.h>
extern int lwip_system_init(void);
#endif
#ifdef RT_USING_FINSH
#include <shell.h>
#include <finsh.h>
#endif
void rt_init_thread_entry(void* parameter)
{
......@@ -35,45 +44,50 @@ void rt_init_thread_entry(void* parameter)
rt_platform_init();
}
#ifdef RT_USING_COMPONENTS_INIT
/* initialization RT-Thread Components */
rt_components_init();
#endif
/* Filesystem Initialization */
#if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
/* initialize the device file system */
dfs_init();
/* initialize the elm chan FatFS file system*/
elm_init();
/* mount sd card fat partition 1 as root directory */
if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
{
rt_kprintf("File System initialized!\n");
}
else
{
/* mount sd card fat partition 1 as root directory */
if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
{
rt_kprintf("File System initialized!\n");
}
else
{
rt_kprintf("File System initialzation failed!\n");
}
rt_kprintf("File System initialzation failed!\n");
}
#endif /* RT_USING_DFS && RT_USING_DFS_ELMFAT */
#ifdef RT_USING_LWIP
/* initialize lwip stack */
/* register ethernetif device */
eth_system_device_init();
/* initialize lwip system */
lwip_system_init();
rt_kprintf("TCP/IP initialized!\n");
#endif
#ifdef RT_USING_FINSH
/* initialize finsh */
finsh_system_init();
finsh_set_device(RT_CONSOLE_DEVICE_NAME);
#endif
}
int rt_application_init(void)
{
rt_thread_t init_thread;
rt_thread_t tid;
#if (RT_THREAD_PRIORITY_MAX == 32)
init_thread = rt_thread_create("init",
rt_init_thread_entry, RT_NULL,
2048, 8, 20);
#else
init_thread = rt_thread_create("init",
rt_init_thread_entry, RT_NULL,
2048, 80, 20);
#endif
if (init_thread != RT_NULL)
{
rt_thread_startup(init_thread);
}
tid = rt_thread_create("init",
rt_init_thread_entry, RT_NULL,
2048, RT_THREAD_PRIORITY_MAX/3, 20);
if (tid != RT_NULL) rt_thread_startup(tid);
return 0;
}
......
bsp/stm32f107/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -81,9 +81,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/stm32f107/rtconfig.h
浏览文件 @ d1a4f2e8
......@@ -69,8 +69,8 @@
#define RT_CONSOLE_DEVICE_NAME "uart1"
// </section>
// <section name="RT_USING_COMPONENTS_INIT" description="Using components init" default="true" >
#define RT_USING_COMPONENTS_INIT
// <section name="RT_USING_COMPONENTS_INIT" description="Using components init" default="false" >
// #define RT_USING_COMPONENTS_INIT
// </section>
/* SECTION: finsh, a C-Express shell */
......
bsp/stm32f10x/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -122,9 +122,6 @@ void rt_init_thread_entry(void* parameter)
/* init touch panel */
rtgui_touch_hw_init();
/* re-init device driver */
rt_device_init_all();
/* find lcd device */
lcd = rt_device_find("lcd");
......
bsp/stm32f10x/drivers/usart.c
浏览文件 @ d1a4f2e8
......@@ -137,7 +137,6 @@ static const struct rt_uart_ops stm32_uart_ops =
#if defined(RT_USING_UART1)
/* UART1 device driver structure */
struct serial_ringbuffer uart1_int_rx;
struct stm32_uart uart1 =
{
USART1,
......@@ -155,7 +154,7 @@ void USART1_IRQHandler(void)
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial1);
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
......@@ -172,7 +171,6 @@ void USART1_IRQHandler(void)
#if defined(RT_USING_UART2)
/* UART1 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct stm32_uart uart2 =
{
USART2,
......@@ -190,7 +188,7 @@ void USART2_IRQHandler(void)
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial2);
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
......@@ -207,7 +205,6 @@ void USART2_IRQHandler(void)
#if defined(RT_USING_UART3)
/* UART1 device driver structure */
struct serial_ringbuffer uart3_int_rx;
struct stm32_uart uart3 =
{
USART3,
......@@ -225,7 +222,7 @@ void USART3_IRQHandler(void)
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial3);
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
......@@ -329,14 +326,13 @@ void rt_hw_usart_init(void)
config.baud_rate = BAUD_RATE_115200;
serial1.ops = &stm32_uart_ops;
serial1.int_rx = &uart1_int_rx;
serial1.config = config;
NVIC_Configuration(&uart1);
/* register UART1 device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif /* RT_USING_UART1 */
......@@ -345,7 +341,6 @@ void rt_hw_usart_init(void)
config.baud_rate = BAUD_RATE_115200;
serial2.ops = &stm32_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
NVIC_Configuration(&uart2);
......@@ -362,7 +357,6 @@ void rt_hw_usart_init(void)
config.baud_rate = BAUD_RATE_115200;
serial3.ops = &stm32_uart_ops;
serial3.int_rx = &uart3_int_rx;
serial3.config = config;
NVIC_Configuration(&uart3);
......
bsp/stm32f20x/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -66,12 +66,9 @@ void rt_init_thread_entry(void* parameter)
/* register ethernetif device */
eth_system_device_init();
/* initialize eth interface */
rt_hw_stm32_eth_init();
/* re-init device driver */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
......
bsp/stm32f20x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -107,9 +107,6 @@ void rtthread_startup(void)
rt_hw_rtc_init();
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/stm32f40x/applications/application.c
浏览文件 @ d1a4f2e8
......@@ -34,8 +34,6 @@ void rt_init_thread_entry(void* parameter)
eth_system_device_init();
rt_hw_stm32_eth_init();
/* re-init device driver */
rt_device_init_all();
/* init lwip system */
lwip_sys_init();
......
bsp/stm32f40x/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -85,9 +85,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
/* init all device */
rt_device_init_all();
/* init application */
rt_application_init();
......
bsp/upd70f3454/applications/startup.c
浏览文件 @ d1a4f2e8
......@@ -68,11 +68,6 @@ void rtthread_startup(void)
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/wh44b0/startup.c
浏览文件 @ d1a4f2e8
......@@ -84,10 +84,6 @@ void rtthread_startup(void)
rt_thread_idle_sethook(rt_hw_led_flash);
#endif
#ifdef RT_USING_DEVICE
rt_device_init_all();
#endif
/* init application */
rt_application_init();
......
bsp/xplorer4330/drivers/drv_uart.c
浏览文件 @ d1a4f2e8
......@@ -97,7 +97,6 @@ static const struct rt_uart_ops lpc_uart_ops =
#if defined(RT_USING_UART0)
/* UART0 device driver structure */
struct serial_ringbuffer uart0_int_rx;
struct lpc_uart uart0 =
{
LPC_USART0,
......@@ -136,7 +135,7 @@ void UART0_IRQHandler(void)
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
......@@ -150,7 +149,6 @@ void UART0_IRQHandler(void)
#endif
#if defined(RT_USING_UART2)
/* UART2 device driver structure */
struct serial_ringbuffer uart2_int_rx;
struct lpc_uart uart2 =
{
LPC_USART2,
......@@ -189,7 +187,7 @@ void UART2_IRQHandler(void)
/* read the data to buffer */
while (uart->USART->LSR & UART_LSR_RDR)
{
rt_hw_serial_isr(&serial0);
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
}
break;
......@@ -214,9 +212,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial0.ops = &lpc_uart_ops;
serial0.int_rx = &uart0_int_rx;
serial0.config = config;
/* Enable GPIO register interface clock */
......@@ -256,7 +254,7 @@ void rt_hw_uart_init(void)
/* register UART1 device */
rt_hw_serial_register(&serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
#ifdef RT_USING_UART2
......@@ -267,9 +265,9 @@ void rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
serial2.ops = &lpc_uart_ops;
serial2.int_rx = &uart2_int_rx;
serial2.config = config;
/* Enable GPIO register interface clock */
......@@ -309,7 +307,7 @@ void rt_hw_uart_init(void)
/* register UART1 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
#endif
}
bsp/zynq7000/drivers/uart.c
浏览文件 @ d1a4f2e8
......@@ -98,7 +98,7 @@ static void rt_hw_uart_isr(int irqno, void *param)
{
struct rt_serial_device *serial = (struct rt_serial_device *)param;
rt_hw_serial_isr(serial);
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
......@@ -267,9 +267,7 @@ static struct hw_uart_device _uart_device1 =
.txmio = (rt_uint32_t*)(Zynq7000_SLCR_BASE+0x07C0), /* MIO48 */
};
static struct serial_ringbuffer _uart_int_rx0;
static struct rt_serial_device _serial0;
static struct serial_ringbuffer _uart_int_rx1;
static struct rt_serial_device _serial1;
int rt_hw_uart_init(void)
......@@ -282,21 +280,20 @@ int rt_hw_uart_init(void)
config.parity = PARITY_NONE;
config.stop_bits = STOP_BITS_1;
config.invert = NRZ_NORMAL;
config.bufsz = RT_SERIAL_RB_BUFSZ;
_serial0.ops = &_uart_ops;
_serial0.int_rx = &_uart_int_rx0;
_serial0.config = config;
_serial1.ops = &_uart_ops;
_serial1.int_rx = &_uart_int_rx1;
_serial1.config = config;
/* register uart device */
rt_hw_serial_register(&_serial0, "uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&_uart_device0);
rt_hw_serial_register(&_serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
&_uart_device1);
return 0;
}
......
components/drivers/include/drivers/serial.h
浏览文件 @ d1a4f2e8
......@@ -70,6 +70,15 @@
#define RT_DEVICE_CTRL_CLR_INT 0x11 /* disable receive irq */
#define RT_DEVICE_CTRL_GET_INT 0x12
#define RT_SERIAL_EVENT_RX_IND 0x01 /* Rx indication */
#define RT_SERIAL_EVENT_TX_DONE 0x02 /* Tx complete */
#define RT_SERIAL_EVENT_RX_DMADONE 0x03 /* Rx DMA transfer done */
#define RT_SERIAL_EVENT_TX_DMADONE 0x04 /* Tx DMA transfer done */
#define RT_SERIAL_EVENT_RX_TIMEOUT 0x05 /* Rx timeout */
#define RT_SERIAL_DMA_RX 0x01
#define RT_SERIAL_DMA_TX 0x02
#define RT_SERIAL_RX_INT 0x01
#define RT_SERIAL_TX_INT 0x02
......@@ -89,24 +98,51 @@
PARITY_NONE, /* No parity */ \
BIT_ORDER_LSB, /* LSB first sent */ \
NRZ_NORMAL, /* Normal mode */ \
RT_SERIAL_RB_BUFSZ, /* Buffer size */ \
0 \
}
struct serial_ringbuffer
{
rt_uint8_t buffer[RT_SERIAL_RB_BUFSZ];
rt_uint16_t put_index, get_index;
};
struct serial_configure
{
rt_uint32_t baud_rate;
rt_uint32_t data_bits :4;
rt_uint32_t stop_bits :2;
rt_uint32_t parity :2;
rt_uint32_t bit_order :1;
rt_uint32_t invert :1;
rt_uint32_t reserved :20;
rt_uint32_t bufsz :16;
rt_uint32_t reserved :4;
};
/*
* Serial FIFO mode
*/
struct rt_serial_rx_fifo
{
/* software fifo */
rt_uint8_t *buffer;
rt_uint16_t put_index, get_index;
};
struct rt_serial_tx_fifo
{
struct rt_completion completion;
};
/*
* Serial DMA mode
*/
struct rt_serial_rx_dma
{
rt_bool_t activated;
};
struct rt_serial_tx_dma
{
rt_bool_t activated;
struct rt_data_queue data_queue;
};
struct rt_serial_device
......@@ -116,14 +152,8 @@ struct rt_serial_device
const struct rt_uart_ops *ops;
struct serial_configure config;
/* rx structure */
struct serial_ringbuffer *int_rx;
/* tx structure */
struct serial_ringbuffer *int_tx;
struct rt_data_queue tx_dq; /* tx dataqueue */
volatile rt_bool_t dma_flag; /* dma transfer flag */
void *serial_rx;
void *serial_tx;
};
typedef struct rt_serial_device rt_serial_t;
......@@ -138,14 +168,15 @@ struct rt_uart_ops
int (*putc)(struct rt_serial_device *serial, char c);
int (*getc)(struct rt_serial_device *serial);
rt_size_t (*dma_transmit)(struct rt_serial_device *serial, const char *buf, rt_size_t size);
rt_size_t (*dma_transmit)(struct rt_serial_device *serial, const rt_uint8_t *buf, rt_size_t size, int direction);
};
void rt_hw_serial_isr(struct rt_serial_device *serial);
void rt_hw_serial_dma_tx_isr(struct rt_serial_device *serial);
void rt_hw_serial_isr(struct rt_serial_device *serial, int event);
rt_err_t rt_hw_serial_register(struct rt_serial_device *serial,
const char *name,
rt_uint32_t flag,
void *data);
#endif
components/drivers/serial/serial.c
浏览文件 @ d1a4f2e8
此差异已折叠。
components/finsh/shell.c
浏览文件 @ d1a4f2e8
......@@ -306,8 +306,8 @@ void finsh_thread_entry(void* parameter)
#ifdef RT_USING_CONSOLE
shell->device = rt_console_get_device();
RT_ASSERT(shell->device);
rt_device_open(shell->device, RT_DEVICE_OFLAG_RDWR);
rt_device_set_rx_indicate(shell->device, finsh_rx_ind);
rt_device_open(shell->device, RT_DEVICE_OFLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
#else
RT_ASSERT(shell->device);
#endif
......
components/pthreads/mqueue.c
浏览文件 @ d1a4f2e8
......@@ -119,6 +119,7 @@ mqd_t mq_open(const char *name, int oflag, ...)
{
mqd_t mqdes;
va_list arg;
mode_t mode;
struct mq_attr *attr = RT_NULL;
/* lock posix mqueue list */
......@@ -128,6 +129,8 @@ mqd_t mq_open(const char *name, int oflag, ...)
if (oflag & O_CREAT)
{
va_start(arg, oflag);
mode = (mode_t)va_arg(arg, unsigned int);
mode = mode;
attr = (struct mq_attr *)va_arg(arg, struct mq_attr *);
va_end(arg);
......
components/pthreads/semaphore.c
浏览文件 @ d1a4f2e8
......@@ -224,6 +224,7 @@ sem_t *sem_open(const char *name, int oflag, ...)
{
sem_t* sem;
va_list arg;
mode_t mode;
unsigned int value;
sem = RT_NULL;
......@@ -233,6 +234,7 @@ sem_t *sem_open(const char *name, int oflag, ...)
if (oflag & O_CREAT)
{
va_start(arg, oflag);
mode = (mode_t) va_arg( arg, unsigned int); mode = mode;
value = va_arg( arg, unsigned int);
va_end(arg);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或