[bsp][stm32] add STM32L0xx_HAL

bsp/stm32/libraries/Kconfig

@@ -20,6 +20,11 @@ config SOC_SERIES_STM32F7
     bool
     select ARCH_ARM_CORTEX_M7
     select SOC_FAMILY_STM32
+    
+config SOC_SERIES_STM32L0
+    bool
+    select ARCH_ARM_CORTEX_M0
+    select SOC_FAMILY_STM32
 
 config SOC_SERIES_STM32L4
     bool

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h

+/**
+  ******************************************************************************
+  * @file    stm32l0xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. 
+  *          This file contains all the peripheral register's definitions, bits 
+  *          definitions and memory mapping for STM32L0xx devices.            
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral's registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx
+  * @{
+  */
+    
+#ifndef __STM32L0xx_H
+#define __STM32L0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32L0)
+#define STM32L0
+#endif /* STM32L0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+
+#if !defined (STM32L011xx) && !defined (STM32L021xx) && \
+    !defined (STM32L031xx) && !defined (STM32L041xx) && \
+    !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \
+    !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \
+    !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \
+    !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \
+  /* #define STM32L011xx */
+  /* #define STM32L021xx */
+  /* #define STM32L031xx */   /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */
+  /* #define STM32L041xx */   /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */
+  /* #define STM32L051xx */   /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */
+  /* #define STM32L052xx */   /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */
+  /* #define STM32L053xx */   /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */
+  /* #define STM32L061xx */   /*!< */
+  /* #define STM32L062xx */   /*!< STM32L062K8 */
+  /* #define STM32L063xx */   /*!< STM32L063C8, STM32L063R8 */ 
+  /* #define STM32L071xx */   /*!< */
+  /* #define STM32L072xx */   /*!< */
+  /* #define STM32L073xx */   /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */
+  /* #define STM32L081xx */   /*!< */
+  /* #define STM32L082xx */   /*!< */
+  /* #define STM32L083xx */   /*!< */ 
+#endif
+   
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.7.1
+  */
+#define __STM32L0xx_CMSIS_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32L0xx_CMSIS_VERSION_SUB1   (0x07) /*!< [23:16] sub1 version */
+#define __STM32L0xx_CMSIS_VERSION_SUB2   (0x02) /*!< [15:8]  sub2 version */
+#define __STM32L0xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32L0xx_CMSIS_VERSION        ((__STM32L0xx_CMSIS_VERSION_MAIN     << 24)\
+                                         |(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32L0xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32L0xx_CMSIS_VERSION_RC))
+                                             
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32L011xx)
+  #include "stm32l011xx.h"
+#elif defined(STM32L021xx)
+  #include "stm32l021xx.h"
+#elif defined(STM32L031xx)
+  #include "stm32l031xx.h"
+#elif defined(STM32L041xx)
+  #include "stm32l041xx.h"
+#elif defined(STM32L051xx)
+  #include "stm32l051xx.h"
+#elif defined(STM32L052xx)
+  #include "stm32l052xx.h"
+#elif defined(STM32L053xx)
+  #include "stm32l053xx.h"
+#elif defined(STM32L062xx)
+  #include "stm32l062xx.h"
+#elif defined(STM32L063xx)
+  #include "stm32l063xx.h"
+#elif defined(STM32L061xx)
+  #include "stm32l061xx.h"
+#elif defined(STM32L071xx)
+  #include "stm32l071xx.h"
+#elif defined(STM32L072xx)
+  #include "stm32l072xx.h"
+#elif defined(STM32L073xx)
+  #include "stm32l073xx.h"
+#elif defined(STM32L082xx)
+  #include "stm32l082xx.h"
+#elif defined(STM32L083xx)
+  #include "stm32l083xx.h"
+#elif defined(STM32L081xx)
+  #include "stm32l081xx.h"
+#else
+ #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L0xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h

+/**
+  ******************************************************************************
+  * @file    system_stm32l0xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32L0XX_H
+#define __SYSTEM_STM32L0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32L0xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32L0xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+/*
+*/
+extern const uint8_t AHBPrescTable[16];   /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8];    /*!< APB prescalers table values */
+extern const uint8_t PLLMulTable[9];      /*!< PLL multipiers table values */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L0XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l011xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l011xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l011xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x400;
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size      EQU     0x200;
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     0                              ; Reserved
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     LPUART1_IRQHandler             ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit
+
+        LDR     R0, =__initial_sp          ; set stack pointer
+        MSR     MSP, R0
+
+;;Check if boot space corresponds to system memory
+
+        LDR R0,=0x00000004
+        LDR R1, [R0]
+        LSRS R1, R1, #24
+        LDR R2,=0x1F
+        CMP R1, R2
+
+        BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+        LDR R0,=0x40021034
+        LDR R1,=0x00000001
+        STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+        LDR R0,=0x40010000
+        LDR R1,=0x00000000
+        STR R1, [R0]
+
+ApplicationStart
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  LPUART1_IRQHandler             [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l021xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l021xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l021xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x400;
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x200;
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     0                              ; Reserved
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_LPUART1_IRQHandler         ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit
+
+        LDR     R0, =__initial_sp          ; set stack pointer
+        MSR     MSP, R0
+
+;;Check if boot space corresponds to system memory
+
+        LDR R0,=0x00000004
+        LDR R1, [R0]
+        LSRS R1, R1, #24
+        LDR R2,=0x1F
+        CMP R1, R2
+
+        BNE ApplicationStart
+
+;; SYSCFG clock enable
+
+        LDR R0,=0x40021034
+        LDR R1,=0x00000001
+        STR R1, [R0]
+
+;; Set CFGR1 register with flash memory remap at address 0
+
+        LDR R0,=0x40010000
+        LDR R1,=0x00000000
+        STR R1, [R0]
+
+ApplicationStart
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_LPUART1_IRQHandler         [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+AES_LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l031xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l031xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l031xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x400;
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size      EQU     0x200;
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     0                              ; Reserved
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     LPUART1_IRQHandler             ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  LPUART1_IRQHandler             [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l041xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l041xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l041xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x400;
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x200;
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     0                              ; Reserved
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_LPUART1_IRQHandler         ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_LPUART1_IRQHandler         [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+SPI1_IRQHandler
+USART2_IRQHandler
+AES_LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l051xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l051xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l051xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_IRQHandler                ; TIM6
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     LPUART1_IRQHandler             ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  LPUART1_IRQHandler             [WEAK]
+
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l052xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l052xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l052xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  RNG_LPUART1_IRQHandler         [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_DAC_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+RNG_LPUART1_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l053xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l053xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l053xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     LCD_IRQHandler                 ; LCD
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  RNG_LPUART1_IRQHandler         [WEAK]
+                EXPORT  LCD_IRQHandler                 [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_DAC_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+RNG_LPUART1_IRQHandler
+LCD_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l061xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l061xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l061xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_IRQHandler                ; TIM6
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_LPUART1_IRQHandler         ; AES and LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_LPUART1_IRQHandler         [WEAK]
+
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l062xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l062xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l062xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler                ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_RNG_LPUART1_IRQHandler     ; AES, RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM21_IRQHandler                [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_RNG_LPUART1_IRQHandler     [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_DAC_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_RNG_LPUART1_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l063xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l063xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l063xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     0                              ; Reserved
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     0                              ; Reserved
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     0                              ; Reserved
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_RNG_LPUART1_IRQHandler     ; AES, RNG and LPUART1
+                DCD     LCD_IRQHandler                 ; LCD
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                 [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_RNG_LPUART1_IRQHandler     [WEAK]
+                EXPORT  LCD_IRQHandler                 [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+TIM2_IRQHandler
+TIM6_DAC_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_RNG_LPUART1_IRQHandler
+LCD_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l071xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l071xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l071xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_IRQHandler                ; TIM6
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     LPUART1_IRQHandler             ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_IRQHandler                [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  LPUART1_IRQHandler             [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l072xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l072xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l072xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C lbrary (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  RNG_LPUART1_IRQHandler         [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+RNG_LPUART1_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l073xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l073xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l073xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     LCD_IRQHandler                 ; LCD
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  RNG_LPUART1_IRQHandler         [WEAK]
+                EXPORT  LCD_IRQHandler                 [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+RNG_LPUART1_IRQHandler
+LCD_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l081xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l081xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l081xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_IRQHandler                ; TIM6
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_LPUART1_IRQHandler         ; LPUART1
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+   
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_IRQHandler                [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_LPUART1_IRQHandler         [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_LPUART1_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l082xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l082xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l082xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_RNG_LPUART1_IRQHandler     ; RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_RNG_LPUART1_IRQHandler     [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_RNG_LPUART1_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l083xx.s

+;******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32l083xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.1
+;* Date               : 25-November-2016
+;* Description        : STM32l083xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;*******************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2 
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     AES_RNG_LPUART1_IRQHandler     ; RNG and LPUART1
+                DCD     LCD_IRQHandler                 ; LCD
+                DCD     USB_IRQHandler                 ; USB
+                
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  AES_RNG_LPUART1_IRQHandler     [WEAK]
+                EXPORT  LCD_IRQHandler                 [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler 
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+AES_RNG_LPUART1_IRQHandler
+LCD_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+                
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+                
+                 ELSE
+                
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+                 
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/gcc/startup_stm32l011xx.s

+/**
+  ******************************************************************************
+  * @file      startup_stm32l011xx.s
+  * @author    MCD Application Team
+  * @brief     STM32L011xx Devices vector table for gcc.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0+ processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * 
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0plus
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+   ldr   r0, =_estack
+   mov   sp, r0          /* set stack pointer */
+
+/*Check if boot space corresponds to system memory*/
+
+    LDR R0,=0x00000004
+    LDR R1, [R0]
+    LSRS R1, R1, #24
+    LDR R2,=0x1F
+    CMP R1, R2
+    BNE ApplicationStart
+
+ /*SYSCFG clock enable*/
+    LDR R0,=0x40021034
+    LDR R1,=0x00000001
+    STR R1, [R0]
+
+/*Set CFGR1 register with flash memory remap at address 0*/
+    LDR R0,=0x40010000
+    LDR R1,=0x00000000
+    STR R1, [R0]
+
+ApplicationStart:
+/* Copy the data segment initializers from flash to SRAM */
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2]
+  adds r2, r2, #4
+
+
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+
+LoopForever:
+    b LoopForever
+
+
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */
+  .word     RTC_IRQHandler                    /* RTC through the EXTI line     */
+  .word     FLASH_IRQHandler                  /* FLASH                        */
+  .word     RCC_IRQHandler                    /* RCC                          */
+  .word     EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word     EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word     EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word     0                                 /* Reserved                     */
+  .word     DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word     DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word     DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+  .word     ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2        */
+  .word     LPTIM1_IRQHandler                 /* LPTIM1                       */
+  .word     0                                 /* Reserved                     */
+  .word     TIM2_IRQHandler                   /* TIM2                         */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+  .word     TIM21_IRQHandler                  /* TIM21                        */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+  .word     I2C1_IRQHandler                   /* I2C1                         */
+  .word     0                                 /* Reserved                     */
+  .word     SPI1_IRQHandler                   /* SPI1                         */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+  .word     USART2_IRQHandler                 /* USART2                       */
+  .word     LPUART1_IRQHandler                /* LPUART1                      */
+  .word     0                                 /* Reserved                     */
+  .word     0                                 /* Reserved                     */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler
+
+   .weak      WWDG_IRQHandler
+   .thumb_set WWDG_IRQHandler,Default_Handler
+
+   .weak      PVD_IRQHandler
+   .thumb_set PVD_IRQHandler,Default_Handler
+
+   .weak      RTC_IRQHandler
+   .thumb_set RTC_IRQHandler,Default_Handler
+
+   .weak      FLASH_IRQHandler
+   .thumb_set FLASH_IRQHandler,Default_Handler
+
+   .weak      RCC_IRQHandler
+   .thumb_set RCC_IRQHandler,Default_Handler
+
+   .weak      EXTI0_1_IRQHandler
+   .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+   .weak      EXTI2_3_IRQHandler
+   .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+   .weak      EXTI4_15_IRQHandler
+   .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel1_IRQHandler
+   .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel2_3_IRQHandler
+   .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel4_5_6_7_IRQHandler
+   .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+   .weak      ADC1_COMP_IRQHandler
+   .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+   .weak      LPTIM1_IRQHandler
+   .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+   .weak      TIM2_IRQHandler
+   .thumb_set TIM2_IRQHandler,Default_Handler
+
+   .weak      TIM21_IRQHandler
+   .thumb_set TIM21_IRQHandler,Default_Handler
+
+   .weak      I2C1_IRQHandler
+   .thumb_set I2C1_IRQHandler,Default_Handler
+
+   .weak      SPI1_IRQHandler
+   .thumb_set SPI1_IRQHandler,Default_Handler
+
+   .weak      USART2_IRQHandler
+   .thumb_set USART2_IRQHandler,Default_Handler
+
+   .weak      LPUART1_IRQHandler
+   .thumb_set LPUART1_IRQHandler,Default_Handler
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l011xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x08003FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x200007FF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l011xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200004FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000500;
+define symbol __ICFEDIT_region_RAM_end__   = 0x200007FF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l021xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x08003FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x200007FF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32/libraries/STM32L0xx_HAL/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l021xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x200004FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000500;
+define symbol __ICFEDIT_region_RAM_end__   = 0x200007FF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file