Skip to content

R
rt-thread

宁楠萍 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 954d2447 编写于 作者: L liuguang
浏览文件
操作

[BSP] add rt1050 pin driver code. | 添加rt1050 PIN驱动代码.

上级 93f5e3e4
展开全部 隐藏空白更改
内联 并排
Showing with 782 addition and 2213 deletion
bsp/imxrt1052-evk/.config
浏览文件 @ 954d2447
......@@ -127,7 +127,7 @@ CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_USING_CPUTIME is not set
CONFIG_RT_USING_I2C=y
CONFIG_RT_USING_I2C_BITOPS=y
# CONFIG_RT_USING_PIN is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_RTC is not set
......
bsp/imxrt1052-evk/drivers/SConscript
浏览文件 @ 954d2447
......@@ -15,6 +15,9 @@ drv_sdram.c
CPPPATH = [cwd]
CPPDEFINES = []
if GetDepend('RT_USING_PIN'):
src += ['drv_pin.c']
if GetDepend('RT_USING_LWIP'):
src += ['drv_eth.c', 'fsl_phy.c']
CPPDEFINES += ['FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE']
......
bsp/imxrt1052-evk/drivers/drv_pin.c 0 → 100644
浏览文件 @ 954d2447
/*
* File : drv_pin.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2018-03-13 Liuguang the first version.
*/
#include "drv_pin.h"
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#ifdef RT_USING_PIN
/* GPIO外设时钟会在GPIO_PinInit中自动配置, 如果定义了以下宏则不会自动配置 */
#if defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL
#error "Please don't define 'FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL'!"
#endif
/* RT1052 PIN描述结构体 */
struct rt1052_pin
{
rt_uint16_t pin;
GPIO_Type *gpio;
rt_uint32_t gpio_pin;
};
#define __ARRAY_LEN(array) (sizeof(array)/sizeof(array[0]))
#define __RT1052_PIN_DEFAULT {0, 0, 0}
#define __RT1052_PIN(INDEX, PORT, PIN) {INDEX, PORT, PIN}
static struct rt1052_pin rt1052_pin_map[] =
{
__RT1052_PIN_DEFAULT,
/* GPIO4 */
__RT1052_PIN( 1, GPIO4, 0), /* GPIO_EMC_00 */
__RT1052_PIN( 2, GPIO4, 1), /* GPIO_EMC_01 */
__RT1052_PIN( 3, GPIO4, 2), /* GPIO_EMC_02 */
__RT1052_PIN( 4, GPIO4, 3), /* GPIO_EMC_03 */
__RT1052_PIN( 5, GPIO4, 4), /* GPIO_EMC_04 */
__RT1052_PIN( 6, GPIO4, 5), /* GPIO_EMC_05 */
__RT1052_PIN( 7, GPIO4, 6), /* GPIO_EMC_06 */
__RT1052_PIN( 8, GPIO4, 7), /* GPIO_EMC_07 */
__RT1052_PIN( 9, GPIO4, 8), /* GPIO_EMC_08 */
__RT1052_PIN(10, GPIO4, 9), /* GPIO_EMC_09 */
__RT1052_PIN(11, GPIO4, 10), /* GPIO_EMC_10 */
__RT1052_PIN(12, GPIO4, 11), /* GPIO_EMC_11 */
__RT1052_PIN(13, GPIO4, 12), /* GPIO_EMC_12 */
__RT1052_PIN(14, GPIO4, 13), /* GPIO_EMC_13 */
__RT1052_PIN(15, GPIO4, 14), /* GPIO_EMC_14 */
__RT1052_PIN(16, GPIO4, 15), /* GPIO_EMC_15 */
__RT1052_PIN(17, GPIO4, 16), /* GPIO_EMC_16 */
__RT1052_PIN(18, GPIO4, 17), /* GPIO_EMC_17 */
__RT1052_PIN(19, GPIO4, 18), /* GPIO_EMC_18 */
__RT1052_PIN(20, GPIO4, 19), /* GPIO_EMC_19 */
__RT1052_PIN(21, GPIO4, 20), /* GPIO_EMC_20 */
__RT1052_PIN(22, GPIO4, 21), /* GPIO_EMC_21 */
__RT1052_PIN(23, GPIO4, 22), /* GPIO_EMC_22 */
__RT1052_PIN(24, GPIO4, 23), /* GPIO_EMC_23 */
__RT1052_PIN(25, GPIO4, 24), /* GPIO_EMC_24 */
__RT1052_PIN(26, GPIO4, 25), /* GPIO_EMC_25 */
__RT1052_PIN(27, GPIO4, 26), /* GPIO_EMC_26 */
__RT1052_PIN(28, GPIO4, 27), /* GPIO_EMC_27 */
__RT1052_PIN(29, GPIO4, 28), /* GPIO_EMC_28 */
__RT1052_PIN(30, GPIO4, 29), /* GPIO_EMC_29 */
__RT1052_PIN(31, GPIO4, 30), /* GPIO_EMC_30 */
__RT1052_PIN(32, GPIO4, 31), /* GPIO_EMC_31 */
__RT1052_PIN(33, GPIO3, 18), /* GPIO_EMC_32 */
__RT1052_PIN(34, GPIO3, 19), /* GPIO_EMC_33 */
__RT1052_PIN(35, GPIO3, 20), /* GPIO_EMC_34 */
__RT1052_PIN(36, GPIO3, 21), /* GPIO_EMC_35 */
__RT1052_PIN(37, GPIO3, 22), /* GPIO_EMC_36 */
__RT1052_PIN(38, GPIO3, 23), /* GPIO_EMC_37 */
__RT1052_PIN(39, GPIO3, 24), /* GPIO_EMC_38 */
__RT1052_PIN(40, GPIO3, 25), /* GPIO_EMC_39 */
__RT1052_PIN(41, GPIO3, 26), /* GPIO_EMC_40 */
__RT1052_PIN(42, GPIO3, 27), /* GPIO_EMC_41 */
/* GPIO1 */
__RT1052_PIN(43, GPIO1, 0), /* GPIO_AD_B0_00 */
__RT1052_PIN(44, GPIO1, 1), /* GPIO_AD_B0_01 */
__RT1052_PIN(45, GPIO1, 2), /* GPIO_AD_B0_02 */
__RT1052_PIN(46, GPIO1, 3), /* GPIO_AD_B0_03 */
__RT1052_PIN(47, GPIO1, 4), /* GPIO_AD_B0_04 */
__RT1052_PIN(48, GPIO1, 5), /* GPIO_AD_B0_05 */
__RT1052_PIN(49, GPIO1, 6), /* GPIO_AD_B0_06 */
__RT1052_PIN(50, GPIO1, 7), /* GPIO_AD_B0_07 */
__RT1052_PIN(51, GPIO1, 8), /* GPIO_AD_B0_08 */
__RT1052_PIN(52, GPIO1, 9), /* GPIO_AD_B0_09 */
__RT1052_PIN(53, GPIO1, 10), /* GPIO_AD_B0_10 */
__RT1052_PIN(54, GPIO1, 11), /* GPIO_AD_B0_11 */
__RT1052_PIN(55, GPIO1, 12), /* GPIO_AD_B0_12 */
__RT1052_PIN(56, GPIO1, 13), /* GPIO_AD_B0_13 */
__RT1052_PIN(57, GPIO1, 14), /* GPIO_AD_B0_14 */
__RT1052_PIN(58, GPIO1, 15), /* GPIO_AD_B0_15 */
__RT1052_PIN(59, GPIO1, 16), /* GPIO_AD_B1_00 */
__RT1052_PIN(60, GPIO1, 17), /* GPIO_AD_B1_01 */
__RT1052_PIN(61, GPIO1, 18), /* GPIO_AD_B1_02 */
__RT1052_PIN(62, GPIO1, 19), /* GPIO_AD_B1_03 */
__RT1052_PIN(63, GPIO1, 20), /* GPIO_AD_B1_04 */
__RT1052_PIN(64, GPIO1, 21), /* GPIO_AD_B1_05 */
__RT1052_PIN(65, GPIO1, 22), /* GPIO_AD_B1_06 */
__RT1052_PIN(66, GPIO1, 23), /* GPIO_AD_B1_07 */
__RT1052_PIN(67, GPIO1, 24), /* GPIO_AD_B1_08 */
__RT1052_PIN(68, GPIO1, 25), /* GPIO_AD_B1_09 */
__RT1052_PIN(69, GPIO1, 26), /* GPIO_AD_B1_10 */
__RT1052_PIN(70, GPIO1, 27), /* GPIO_AD_B1_11 */
__RT1052_PIN(71, GPIO1, 28), /* GPIO_AD_B1_12 */
__RT1052_PIN(72, GPIO1, 29), /* GPIO_AD_B1_13 */
__RT1052_PIN(73, GPIO1, 30), /* GPIO_AD_B1_14 */
__RT1052_PIN(74, GPIO1, 31), /* GPIO_AD_B1_15 */
/* GPIO2 */
__RT1052_PIN( 75, GPIO2, 0), /* GPIO_B0_00 */
__RT1052_PIN( 76, GPIO2, 1), /* GPIO_B0_01 */
__RT1052_PIN( 77, GPIO2, 2), /* GPIO_B0_02 */
__RT1052_PIN( 78, GPIO2, 3), /* GPIO_B0_03 */
__RT1052_PIN( 79, GPIO2, 4), /* GPIO_B0_04 */
__RT1052_PIN( 80, GPIO2, 5), /* GPIO_B0_05 */
__RT1052_PIN( 81, GPIO2, 6), /* GPIO_B0_06 */
__RT1052_PIN( 82, GPIO2, 7), /* GPIO_B0_07 */
__RT1052_PIN( 83, GPIO2, 8), /* GPIO_B0_08 */
__RT1052_PIN( 84, GPIO2, 9), /* GPIO_B0_09 */
__RT1052_PIN( 85, GPIO2, 10), /* GPIO_B0_10 */
__RT1052_PIN( 86, GPIO2, 11), /* GPIO_B0_11 */
__RT1052_PIN( 87, GPIO2, 12), /* GPIO_B0_12 */
__RT1052_PIN( 88, GPIO2, 13), /* GPIO_B0_13 */
__RT1052_PIN( 89, GPIO2, 14), /* GPIO_B0_14 */
__RT1052_PIN( 90, GPIO2, 15), /* GPIO_B0_15 */
__RT1052_PIN( 91, GPIO2, 16), /* GPIO_B1_00 */
__RT1052_PIN( 92, GPIO2, 17), /* GPIO_B1_01 */
__RT1052_PIN( 93, GPIO2, 18), /* GPIO_B1_02 */
__RT1052_PIN( 94, GPIO2, 19), /* GPIO_B1_03 */
__RT1052_PIN( 95, GPIO2, 20), /* GPIO_B1_04 */
__RT1052_PIN( 96, GPIO2, 21), /* GPIO_B1_05 */
__RT1052_PIN( 97, GPIO2, 22), /* GPIO_B1_06 */
__RT1052_PIN( 98, GPIO2, 23), /* GPIO_B1_07 */
__RT1052_PIN( 99, GPIO2, 24), /* GPIO_B1_08 */
__RT1052_PIN(100, GPIO2, 25), /* GPIO_B1_09 */
__RT1052_PIN(101, GPIO2, 26), /* GPIO_B1_10 */
__RT1052_PIN(102, GPIO2, 27), /* GPIO_B1_11 */
__RT1052_PIN(103, GPIO2, 28), /* GPIO_B1_12 */
__RT1052_PIN(104, GPIO2, 29), /* GPIO_B1_13 */
__RT1052_PIN(105, GPIO2, 30), /* GPIO_B1_14 */
__RT1052_PIN(106, GPIO2, 31), /* GPIO_B1_15 */
/* GPIO3 */
__RT1052_PIN(107, GPIO3, 0), /* GPIO_SD_B1_00 */
__RT1052_PIN(108, GPIO3, 1), /* GPIO_SD_B1_01 */
__RT1052_PIN(109, GPIO3, 2), /* GPIO_SD_B1_02 */
__RT1052_PIN(110, GPIO3, 3), /* GPIO_SD_B1_03 */
__RT1052_PIN(111, GPIO3, 4), /* GPIO_SD_B1_04 */
__RT1052_PIN(112, GPIO3, 5), /* GPIO_SD_B1_05 */
__RT1052_PIN(113, GPIO3, 6), /* GPIO_SD_B1_06 */
__RT1052_PIN(114, GPIO3, 7), /* GPIO_SD_B1_07 */
__RT1052_PIN(115, GPIO3, 8), /* GPIO_SD_B1_08 */
__RT1052_PIN(116, GPIO3, 9), /* GPIO_SD_B1_09 */
__RT1052_PIN(117, GPIO3, 10), /* GPIO_SD_B1_10 */
__RT1052_PIN(118, GPIO3, 11), /* GPIO_SD_B1_11 */
__RT1052_PIN(119, GPIO3, 12), /* GPIO_SD_B0_00 */
__RT1052_PIN(120, GPIO3, 13), /* GPIO_SD_B0_01 */
__RT1052_PIN(121, GPIO3, 14), /* GPIO_SD_B0_02 */
__RT1052_PIN(122, GPIO3, 15), /* GPIO_SD_B0_03 */
__RT1052_PIN(123, GPIO3, 16), /* GPIO_SD_B0_04 */
__RT1052_PIN(124, GPIO3, 17), /* GPIO_SD_B0_05 */
/* GPIO5 */
__RT1052_PIN(125, GPIO5, 0), /* WAKEUP */
__RT1052_PIN(126, GPIO5, 1), /* PMIC_ON_REQ */
__RT1052_PIN(127, GPIO5, 2) /* PMIC_STBY_REQ */
};
static void rt1052_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
gpio_pin_config_t gpio;
rt_uint32_t config_value = 0;
if((pin > __ARRAY_LEN(rt1052_pin_map)) || (pin == 0))
{
return;
}
if(rt1052_pin_map[pin].gpio != GPIO5)
{
CLOCK_EnableClock(kCLOCK_Iomuxc);
}
else
{
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
}
/* 配置IOMUXC: 将IO配置为GPIO */
IOMUXC_SetPinMux(0x401F8010U + pin*4, 0x5U, 0, 0, 0, 0);
gpio.outputLogic = 0;
gpio.interruptMode = kGPIO_NoIntmode;
switch(mode)
{
case PIN_MODE_OUTPUT:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalOutput;
}
break;
case PIN_MODE_INPUT:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLDOWN:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLUP:
{
config_value = 0x5030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_OUTPUT_OD:
{
config_value = 0x1830U;
gpio.direction = kGPIO_DigitalOutput;
}
break;
}
/* 配置GPIO模式: 上下拉模式, 开漏模, IO翻转速度(50MHz) */
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x401F8200U + pin*4, config_value);
GPIO_PinInit(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, &gpio);
}
static int rt1052_pin_read(rt_device_t dev, rt_base_t pin)
{
return GPIO_PinRead(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
}
static void rt1052_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
{
GPIO_PinWrite(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, value);
}
static struct rt_pin_ops rt1052_pin_ops =
{
.pin_mode = rt1052_pin_mode,
.pin_read = rt1052_pin_read,
.pin_write = rt1052_pin_write
};
int rt_hw_pin_init(void)
{
int ret = RT_EOK;
ret = rt_device_pin_register("pin", &rt1052_pin_ops, RT_NULL);
return ret;
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
#endif /*RT_USING_PIN */
bsp/imxrt1052-evk/drivers/drv_pin.h 0 → 100644
浏览文件 @ 954d2447
/*
* File : drv_pin.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2018-03-13 Liuguang the first version.
*/
#ifndef __DRV_PIN_H__
#define __DRV_PIN_H__
#include <rtthread.h>
#include <rtdevice.h>
int rt_hw_pin_init(void);
#endif
bsp/imxrt1052-evk/project.uvoptx
浏览文件 @ 954d2447
此差异已折叠。
bsp/imxrt1052-evk/project.uvprojx
浏览文件 @ 954d2447
此差异已折叠。
bsp/imxrt1052-evk/rtconfig.h
浏览文件 @ 954d2447
......@@ -8,7 +8,9 @@
#define RT_NAME_MAX 8
#define RT_ALIGN_SIZE 4
/* RT_THREAD_PRIORITY_8 is not set */
#define RT_THREAD_PRIORITY_32
/* RT_THREAD_PRIORITY_256 is not set */
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100
#define RT_DEBUG
......@@ -17,6 +19,7 @@
#define RT_DEBUG_THREAD 0
#define RT_USING_HOOK
#define IDLE_THREAD_STACK_SIZE 256
/* RT_USING_TIMER_SOFT is not set */
/* Inter-Thread communication */
......@@ -25,19 +28,26 @@
#define RT_USING_EVENT
#define RT_USING_MAILBOX
#define RT_USING_MESSAGEQUEUE
/* RT_USING_SIGNALS is not set */
/* Memory Management */
/* RT_USING_MEMPOOL is not set */
#define RT_USING_MEMHEAP
/* RT_USING_NOHEAP is not set */
/* RT_USING_SMALL_MEM is not set */
/* RT_USING_SLAB is not set */
#define RT_USING_MEMHEAP_AS_HEAP
#define RT_USING_HEAP
/* Kernel Device Object */
#define RT_USING_DEVICE
/* RT_USING_INTERRUPT_INFO is not set */
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart1"
/* RT_USING_MODULE is not set */
#define ARCH_ARM
#define ARCH_ARM_CORTEX_M
#define ARCH_ARM_CORTEX_M7
......@@ -50,6 +60,7 @@
/* C++ features */
/* RT_USING_CPLUSPLUS is not set */
/* Command shell */
......@@ -62,8 +73,10 @@
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_CMD_SIZE 80
/* FINSH_USING_AUTH is not set */
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
/* FINSH_USING_MSH_ONLY is not set */
/* Device virtual file system */
......@@ -78,36 +91,65 @@
#define RT_DFS_ELM_CODE_PAGE 437
#define RT_DFS_ELM_WORD_ACCESS
/* RT_DFS_ELM_USE_LFN_0 is not set */
/* RT_DFS_ELM_USE_LFN_1 is not set */
/* RT_DFS_ELM_USE_LFN_2 is not set */
#define RT_DFS_ELM_USE_LFN_3
#define RT_DFS_ELM_USE_LFN 3
#define RT_DFS_ELM_MAX_LFN 255
#define RT_DFS_ELM_DRIVES 2
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
/* RT_DFS_ELM_USE_ERASE is not set */
#define RT_DFS_ELM_REENTRANT
#define RT_USING_DFS_DEVFS
/* RT_USING_DFS_NET is not set */
/* RT_USING_DFS_ROMFS is not set */
/* RT_USING_DFS_RAMFS is not set */
/* RT_USING_DFS_UFFS is not set */
/* RT_USING_DFS_JFFS2 is not set */
/* RT_USING_DFS_NFS is not set */
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
/* RT_USING_MTD_NOR is not set */
/* RT_USING_MTD_NAND is not set */
/* RT_USING_RTC is not set */
#define RT_USING_SDIO
/* RT_USING_SPI is not set */
/* RT_USING_WDT is not set */
/* RT_USING_WIFI is not set */
/* Using USB */
/* RT_USING_USB_HOST is not set */
/* RT_USING_USB_DEVICE is not set */
/* POSIX layer and C standard library */
#define RT_USING_LIBC
/* RT_USING_PTHREADS is not set */
/* RT_USING_POSIX is not set */
/* HAVE_SYS_SIGNALS is not set */
/* Network stack */
/* light weight TCP/IP stack */
#define RT_USING_LWIP
/* RT_USING_LWIP141 is not set */
#define RT_USING_LWIP202
/* RT_USING_LWIP_IPV6 is not set */
/* RT_LWIP_IGMP is not set */
#define RT_LWIP_ICMP
/* RT_LWIP_SNMP is not set */
#define RT_LWIP_DNS
#define RT_LWIP_DHCP
#define IP_SOF_BROADCAST 1
......@@ -120,6 +162,8 @@
#define RT_LWIP_MSKADDR "255.255.255.0"
#define RT_LWIP_UDP
#define RT_LWIP_TCP
/* RT_LWIP_RAW is not set */
/* RT_LWIP_PPP is not set */
#define RT_MEMP_NUM_NETCONN 8
#define RT_LWIP_PBUF_NUM 16
#define RT_LWIP_RAW_PCB_NUM 4
......@@ -134,24 +178,33 @@
#define RT_LWIP_ETHTHREAD_PRIORITY 12
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
/* RT_LWIP_REASSEMBLY_FRAG is not set */
#define LWIP_NETIF_STATUS_CALLBACK 1
#define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1
/* RT_LWIP_NETIF_LOOPBACK is not set */
#define LWIP_NETIF_LOOPBACK 0
/* Modbus master and slave stack */
/* RT_USING_MODBUS is not set */
/* LWIP_USING_DHCPD is not set */
/* VBUS(Virtual Software BUS) */
/* RT_USING_VBUS is not set */
/* Utilities */
/* RT_USING_LOGTRACE is not set */
/* RT_USING_RYM is not set */
/* ARM CMSIS */
/* RT_USING_CMSIS_OS is not set */
/* RT_USING_RTT_CMSIS is not set */
/* RT-Thread online packages */
......@@ -159,35 +212,70 @@
/* RT-Thread GUI Engine */
/* PKG_USING_GUIENGINE is not set */
/* PKG_USING_PERSIMMON is not set */
/* PKG_USING_LWEXT4 is not set */
/* PKG_USING_PARTITION is not set */
/* PKG_USING_SQLITE is not set */
/* PKG_USING_RTI is not set */
/* IoT - internet of things */
/* PKG_USING_PAHOMQTT is not set */
/* PKG_USING_WEBCLIENT is not set */
/* PKG_USING_MONGOOSE is not set */
/* PKG_USING_WEBTERMINAL is not set */
/* PKG_USING_CJSON is not set */
/* PKG_USING_LJSON is not set */
/* PKG_USING_EZXML is not set */
/* PKG_USING_NANOPB is not set */
/* PKG_USING_GAGENT_CLOUD is not set */
/* Wi-Fi */
/* Marvell WiFi */
/* PKG_USING_WLANMARVELL is not set */
/* Wiced WiFi */
/* PKG_USING_WLAN_WICED is not set */
/* PKG_USING_COAP is not set */
/* PKG_USING_NOPOLL is not set */
/* PKG_USING_NETUTILS is not set */
/* security packages */
/* PKG_USING_MBEDTLS is not set */
/* PKG_USING_libsodium is not set */
/* PKG_USING_TINYCRYPT is not set */
/* language packages */
/* PKG_USING_JERRYSCRIPT is not set */
/* PKG_USING_MICROPYTHON is not set */
/* multimedia packages */
/* PKG_USING_OPENMV is not set */
/* tools packages */
/* PKG_USING_CMBACKTRACE is not set */
/* PKG_USING_EASYLOGGER is not set */
/* PKG_USING_SYSTEMVIEW is not set */
/* PKG_USING_IPERF is not set */
/* miscellaneous packages */
/* PKG_USING_FASTLZ is not set */
/* PKG_USING_MINILZO is not set */
/* PKG_USING_QUICKLZ is not set */
/* example package: hello */
/* PKG_USING_HELLO is not set */
/* PKG_USING_MULTIBUTTON is not set */
#define SOC_IMXRT1052
#define RT_USING_UART
#define RT_USING_UART1
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或