add bsp stm32l072

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h

+/**
+  ******************************************************************************
+  * @file    stm32l0xx.h
+  * @author  MCD Application Team
+  * @version V1.7.0
+  * @date    31-May-2016
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer Header File.
+  *          This file contains all the peripheral register's definitions, bits
+  *          definitions and memory mapping for STM32L0xx devices.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e.
+  *                code will be based on direct access to peripheral's registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx
+  * @{
+  */
+
+#ifndef __STM32L0xx_H
+#define __STM32L0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32L0)
+#define STM32L0
+#endif /* STM32L0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application
+  */
+
+#if !defined (STM32L011xx) && !defined (STM32L021xx) && \
+    !defined (STM32L031xx) && !defined (STM32L041xx) && \
+    !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \
+    !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \
+    !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \
+    !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \
+  /* #define STM32L011xx */
+  /* #define STM32L021xx */
+  /* #define STM32L031xx */   /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */
+  /* #define STM32L041xx */   /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */
+  /* #define STM32L051xx */   /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */
+  /* #define STM32L052xx */   /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */
+  /* #define STM32L053xx */   /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */
+  /* #define STM32L061xx */   /*!< */
+  /* #define STM32L062xx */   /*!< STM32L062K8 */
+  /* #define STM32L063xx */   /*!< STM32L063C8, STM32L063R8 */
+  /* #define STM32L071xx */   /*!< */
+  /* #define STM32L072xx */   /*!< */
+  /* #define STM32L073xx */   /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */
+  /* #define STM32L081xx */   /*!< */
+  /* #define STM32L082xx */   /*!< */
+  /* #define STM32L083xx */   /*!< */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.7.0
+  */
+#define __STM32L0xx_CMSIS_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32L0xx_CMSIS_VERSION_SUB1   (0x07) /*!< [23:16] sub1 version */
+#define __STM32L0xx_CMSIS_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32L0xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32L0xx_CMSIS_VERSION        ((__STM32L0xx_CMSIS_VERSION_MAIN     << 24)\
+                                      |(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\
+                                      |(__STM32L0xx_CMSIS_VERSION_SUB2 << 8 )\
+                                      |(__STM32L0xx_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32L011xx)
+  #include "stm32l011xx.h"
+#elif defined(STM32L021xx)
+  #include "stm32l021xx.h"
+#elif defined(STM32L031xx)
+  #include "stm32l031xx.h"
+#elif defined(STM32L041xx)
+  #include "stm32l041xx.h"
+#elif defined(STM32L051xx)
+  #include "stm32l051xx.h"
+#elif defined(STM32L052xx)
+  #include "stm32l052xx.h"
+#elif defined(STM32L053xx)
+  #include "stm32l053xx.h"
+#elif defined(STM32L062xx)
+  #include "stm32l062xx.h"
+#elif defined(STM32L063xx)
+  #include "stm32l063xx.h"
+#elif defined(STM32L061xx)
+  #include "stm32l061xx.h"
+#elif defined(STM32L071xx)
+  #include "stm32l071xx.h"
+#elif defined(STM32L072xx)
+  #include "stm32l072xx.h"
+#elif defined(STM32L073xx)
+  #include "stm32l073xx.h"
+#elif defined(STM32L082xx)
+  #include "stm32l082xx.h"
+#elif defined(STM32L083xx)
+  #include "stm32l083xx.h"
+#elif defined(STM32L081xx)
+  #include "stm32l081xx.h"
+#else
+ #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  ERROR = 0,
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L0xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h

+/**
+  ******************************************************************************
+  * @file    system_stm32l0xx.h
+  * @author  MCD Application Team
+  * @version V1.7.0
+  * @date    31-May-2016
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32L0XX_H
+#define __SYSTEM_STM32L0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32L0xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32L0xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+/*
+*/
+extern const uint8_t AHBPrescTable[16];   /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8];    /*!< APB prescalers table values */
+extern const uint8_t PLLMulTable[9];      /*!< PLL multipiers table values */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L0XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l072xx.s

+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32l072xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.0
+;* Date               : 31-May-2016
+;* Description        : STM32l072xx Devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C lbrary (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************
+;
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem       SPACE   Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000200
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp              ; Top of Stack
+                DCD     Reset_Handler             ; Reset Handler
+                DCD     NMI_Handler               ; NMI Handler
+                DCD     HardFault_Handler         ; Hard Fault Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     SVC_Handler               ; SVCall Handler
+                DCD     0                         ; Reserved
+                DCD     0                         ; Reserved
+                DCD     PendSV_Handler            ; PendSV Handler
+                DCD     SysTick_Handler           ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC and CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  PVD_IRQHandler                 [WEAK]
+                EXPORT  RTC_IRQHandler                 [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_CRS_IRQHandler             [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  TSC_IRQHandler                  [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Channel4_5_6_7_IRQHandler [WEAK]
+                EXPORT  ADC1_COMP_IRQHandler           [WEAK]
+                EXPORT  LPTIM1_IRQHandler              [WEAK]
+                EXPORT  USART4_5_IRQHandler            [WEAK]
+                EXPORT  TIM2_IRQHandler                [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM6_DAC_IRQHandler            [WEAK]
+                EXPORT  TIM7_IRQHandler                [WEAK]
+                EXPORT  TIM21_IRQHandler               [WEAK]
+                EXPORT  TIM22_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  I2C3_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+                EXPORT  RNG_LPUART1_IRQHandler         [WEAK]
+                EXPORT  USB_IRQHandler                 [WEAK]
+
+
+WWDG_IRQHandler
+PVD_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_CRS_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+TSC_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Channel4_5_6_7_IRQHandler
+ADC1_COMP_IRQHandler
+LPTIM1_IRQHandler
+USART4_5_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+TIM21_IRQHandler
+TIM22_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+I2C3_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+RNG_LPUART1_IRQHandler
+USB_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+                 IF      :DEF:__MICROLIB
+
+                 EXPORT  __initial_sp
+                 EXPORT  __heap_base
+                 EXPORT  __heap_limit
+
+                 ELSE
+
+                 IMPORT  __use_two_region_memory
+                 EXPORT  __user_initial_stackheap
+
+__user_initial_stackheap
+
+                 LDR     R0, =  Heap_Mem
+                 LDR     R1, =(Stack_Mem + Stack_Size)
+                 LDR     R2, = (Heap_Mem +  Heap_Size)
+                 LDR     R3, = Stack_Mem
+                 BX      LR
+
+                 ALIGN
+
+                 ENDIF
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/gcc/startup_stm32l072xx.s

+/**
+  ******************************************************************************
+  * @file      startup_stm32l072xx.s
+  * @author    MCD Application Team
+  * @version   V1.7.0
+  * @date      31-May-2016
+  * @brief     STM32L072xx Devices vector table for Atollic TrueSTUDIO toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M0+ processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m0plus
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:
+   ldr   r0, =_estack
+   mov   sp, r0          /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2]
+  adds r2, r2, #4
+
+
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+
+LoopForever:
+    b LoopForever
+
+
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ *
+ * @param  None
+ * @retval : None
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M0.  Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  0
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */
+  .word     RTC_IRQHandler                    /* RTC through the EXTI line     */
+  .word     FLASH_IRQHandler                  /* FLASH                        */
+  .word     RCC_CRS_IRQHandler                /* RCC and CRS                  */
+  .word     EXTI0_1_IRQHandler                /* EXTI Line 0 and 1            */
+  .word     EXTI2_3_IRQHandler                /* EXTI Line 2 and 3            */
+  .word     EXTI4_15_IRQHandler               /* EXTI Line 4 to 15            */
+  .word     TSC_IRQHandler                     /* TSC                           */
+  .word     DMA1_Channel1_IRQHandler          /* DMA1 Channel 1               */
+  .word     DMA1_Channel2_3_IRQHandler        /* DMA1 Channel 2 and Channel 3 */
+  .word     DMA1_Channel4_5_6_7_IRQHandler    /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
+  .word     ADC1_COMP_IRQHandler              /* ADC1, COMP1 and COMP2        */
+  .word     LPTIM1_IRQHandler                 /* LPTIM1                       */
+  .word     USART4_5_IRQHandler               /* USART4 and USART 5           */
+  .word     TIM2_IRQHandler                   /* TIM2                         */
+  .word     TIM3_IRQHandler                   /* TIM3                         */
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC                 */
+  .word     TIM7_IRQHandler 				          /* TIM7                         */
+  .word     0              					          /* Reserved                     */
+  .word     TIM21_IRQHandler                  /* TIM21                        */
+  .word     I2C3_IRQHandler                   /* I2C3                         */
+  .word     TIM22_IRQHandler                  /* TIM22                        */
+  .word     I2C1_IRQHandler                   /* I2C1                         */
+  .word     I2C2_IRQHandler                   /* I2C2                         */
+  .word     SPI1_IRQHandler                   /* SPI1                         */
+  .word     SPI2_IRQHandler                   /* SPI2                         */
+  .word     USART1_IRQHandler                 /* USART1                       */
+  .word     USART2_IRQHandler                 /* USART2                       */
+  .word     RNG_LPUART1_IRQHandler            /* RNG and LPUART1              */
+  .word     0                                 /* Reserved                     */
+  .word     USB_IRQHandler                    /* USB                          */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler
+
+   .weak      WWDG_IRQHandler
+   .thumb_set WWDG_IRQHandler,Default_Handler
+
+   .weak      PVD_IRQHandler
+   .thumb_set PVD_IRQHandler,Default_Handler
+
+   .weak      RTC_IRQHandler
+   .thumb_set RTC_IRQHandler,Default_Handler
+
+   .weak      FLASH_IRQHandler
+   .thumb_set FLASH_IRQHandler,Default_Handler
+
+   .weak      RCC_CRS_IRQHandler
+   .thumb_set RCC_CRS_IRQHandler,Default_Handler
+
+   .weak      EXTI0_1_IRQHandler
+   .thumb_set EXTI0_1_IRQHandler,Default_Handler
+
+   .weak      EXTI2_3_IRQHandler
+   .thumb_set EXTI2_3_IRQHandler,Default_Handler
+
+   .weak      EXTI4_15_IRQHandler
+   .thumb_set EXTI4_15_IRQHandler,Default_Handler
+
+   .weak      TSC_IRQHandler
+   .thumb_set TSC_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel1_IRQHandler
+   .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel2_3_IRQHandler
+   .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
+
+   .weak      DMA1_Channel4_5_6_7_IRQHandler
+   .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
+
+   .weak      ADC1_COMP_IRQHandler
+   .thumb_set ADC1_COMP_IRQHandler,Default_Handler
+
+   .weak      LPTIM1_IRQHandler
+   .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+   .weak      USART4_5_IRQHandler
+   .thumb_set USART4_5_IRQHandler,Default_Handler
+
+   .weak      TIM2_IRQHandler
+   .thumb_set TIM2_IRQHandler,Default_Handler
+
+   .weak      TIM3_IRQHandler
+   .thumb_set TIM3_IRQHandler,Default_Handler
+
+   .weak      TIM6_DAC_IRQHandler
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+   .weak      TIM7_IRQHandler
+   .thumb_set TIM7_IRQHandler,Default_Handler
+
+   .weak      TIM21_IRQHandler
+   .thumb_set TIM21_IRQHandler,Default_Handler
+
+   .weak      I2C3_IRQHandler
+   .thumb_set I2C3_IRQHandler,Default_Handler
+
+   .weak      TIM22_IRQHandler
+   .thumb_set TIM22_IRQHandler,Default_Handler
+
+   .weak      I2C1_IRQHandler
+   .thumb_set I2C1_IRQHandler,Default_Handler
+
+   .weak      I2C2_IRQHandler
+   .thumb_set I2C2_IRQHandler,Default_Handler
+
+   .weak      SPI1_IRQHandler
+   .thumb_set SPI1_IRQHandler,Default_Handler
+
+   .weak      SPI2_IRQHandler
+   .thumb_set SPI2_IRQHandler,Default_Handler
+
+   .weak      USART1_IRQHandler
+   .thumb_set USART1_IRQHandler,Default_Handler
+
+   .weak      USART2_IRQHandler
+   .thumb_set USART2_IRQHandler,Default_Handler
+
+   .weak      RNG_LPUART1_IRQHandler
+   .thumb_set RNG_LPUART1_IRQHandler,Default_Handler
+
+   .weak      USB_IRQHandler
+   .thumb_set USB_IRQHandler,Default_Handler
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l072xx_flash.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0802FFFF;
+define symbol __ICFEDIT_region_RAM_start__  = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__    = 0x20004FFF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/linker/stm32l072xx_sram.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x20000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x20002FFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20003000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20004FFF;
+
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x200;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite,
+                        block CSTACK, block HEAP };
\ No newline at end of file

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/startup_stm32l072xx.s

+;/******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32l072xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.7.0
+;* Date               : 31-May-2016
+;* Description        : STM32L072xx Ultra Low Power Devices vector
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == _iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR
+;*                        address.
+;*                      - Configure the system clock
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M0+ processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;*
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;*
+;*******************************************************************************/
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     PVD_IRQHandler                 ; PVD through EXTI Line detect
+                DCD     RTC_IRQHandler                 ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_CRS_IRQHandler             ; RCC_CRS
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     TSC_IRQHandler                 ; TSC
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Channel4_5_6_7_IRQHandler ; DMA1 Channel 4, Channel 5, Channel 6 and Channel 7
+                DCD     ADC1_COMP_IRQHandler           ; ADC1, COMP1 and COMP2
+                DCD     LPTIM1_IRQHandler              ; LPTIM1
+                DCD     USART4_5_IRQHandler            ; USART4 and USART5
+                DCD     TIM2_IRQHandler                ; TIM2
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     TIM6_DAC_IRQHandler            ; TIM6 and DAC
+                DCD     TIM7_IRQHandler                ; TIM7
+                DCD     0                              ; Reserved
+                DCD     TIM21_IRQHandler               ; TIM21
+                DCD     I2C3_IRQHandler                ; I2C3
+                DCD     TIM22_IRQHandler               ; TIM22
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     RNG_LPUART1_IRQHandler         ; RNG and LPUART1
+                DCD     0                              ; Reserved
+                DCD     USB_IRQHandler                 ; USB
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler
+        B WWDG_IRQHandler
+
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler
+        B PVD_IRQHandler
+
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler
+        B FLASH_IRQHandler
+
+
+        PUBWEAK RCC_CRS_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_CRS_IRQHandler
+        B RCC_CRS_IRQHandler
+
+
+        PUBWEAK EXTI0_1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_1_IRQHandler
+        B EXTI0_1_IRQHandler
+
+
+        PUBWEAK EXTI2_3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_3_IRQHandler
+        B EXTI2_3_IRQHandler
+
+
+        PUBWEAK EXTI4_15_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI4_15_IRQHandler
+        B EXTI4_15_IRQHandler
+
+
+        PUBWEAK TSC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TSC_IRQHandler
+        B TSC_IRQHandler
+
+
+        PUBWEAK DMA1_Channel1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel1_IRQHandler
+        B DMA1_Channel1_IRQHandler
+
+
+        PUBWEAK DMA1_Channel2_3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel2_3_IRQHandler
+        B DMA1_Channel2_3_IRQHandler
+
+
+        PUBWEAK DMA1_Channel4_5_6_7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DMA1_Channel4_5_6_7_IRQHandler
+        B DMA1_Channel4_5_6_7_IRQHandler
+
+
+        PUBWEAK ADC1_COMP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+ADC1_COMP_IRQHandler
+        B ADC1_COMP_IRQHandler
+
+
+        PUBWEAK LPTIM1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+LPTIM1_IRQHandler
+        B LPTIM1_IRQHandler
+
+
+        PUBWEAK USART4_5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART4_5_IRQHandler
+        B USART4_5_IRQHandler
+
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler
+        B TIM2_IRQHandler
+
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler
+        B TIM3_IRQHandler
+
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM6_DAC_IRQHandler
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM7_IRQHandler
+        B TIM7_IRQHandler
+
+        PUBWEAK TIM21_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM21_IRQHandler
+        B TIM21_IRQHandler
+
+        PUBWEAK I2C3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+I2C3_IRQHandler
+        B I2C3_IRQHandler
+
+        PUBWEAK TIM22_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM22_IRQHandler
+        B TIM22_IRQHandler
+
+
+        PUBWEAK I2C1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+I2C1_IRQHandler
+        B I2C1_IRQHandler
+
+
+        PUBWEAK I2C2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+I2C2_IRQHandler
+        B I2C2_IRQHandler
+
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler
+        B SPI1_IRQHandler
+
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler
+        B SPI2_IRQHandler
+
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler
+        B USART1_IRQHandler
+
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler
+        B USART2_IRQHandler
+
+
+        PUBWEAK RNG_LPUART1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+RNG_LPUART1_IRQHandler
+        B RNG_LPUART1_IRQHandler
+
+
+        PUBWEAK USB_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USB_IRQHandler
+        B USB_IRQHandler
+
+        END
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

bsp/stm32l072/Drivers/CMSIS/Device/ST/STM32L0xx/Source/Templates/system_stm32l0xx.c

+/**
+  ******************************************************************************
+  * @file    system_stm32l0xx.c
+  * @author  MCD Application Team
+  * @version V1.7.0
+  * @date    31-May-2016
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32l0xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx_system
+  * @{
+  */
+
+/** @addtogroup STM32L0xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32l0xx.h"
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE    ((uint32_t)2000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_Defines
+  * @{
+  */
+/************************* Miscellaneous Configuration ************************/
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00U /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x100. */
+/******************************************************************************/
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 2000000U;
+  const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
+  const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
+  const uint8_t PLLMulTable[9] = {3U, 4U, 6U, 8U, 12U, 16U, 24U, 32U, 48U};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L0xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+/*!< Set MSION bit */
+  RCC->CR |= (uint32_t)0x00000100U;
+
+  /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
+  RCC->CFGR &= (uint32_t) 0x88FF400CU;
+
+  /*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFF6U;
+
+  /*!< Reset HSI48ON  bit */
+  RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
+
+  /*!< Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFFU;
+
+  /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
+  RCC->CFGR &= (uint32_t)0xFF02FFFFU;
+
+  /*!< Disable all interrupts */
+  RCC->CIER = 0x00000000U;
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+  * @brief  Update SystemCoreClock according to Clock Register Values
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
+  *             value as defined by the MSI range.
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32l0xx_hal.h file (default value
+  *              8 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmul = 0U, plldiv = 0U, pllsource = 0U, msirange = 0U;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00U:  /* MSI used as system clock */
+      msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
+      SystemCoreClock = (32768U * (1U << (msirange + 1U)));
+      break;
+    case 0x04U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x08U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x0CU:  /* PLL used as system clock */
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
+      plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
+      pllmul = PLLMulTable[(pllmul >> 18U)];
+      plldiv = (plldiv >> 22U) + 1U;
+
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock selected as PLL clock entry */
+        SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
+      }
+      else
+      {
+        /* HSE selected as PLL clock entry */
+        SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
+      }
+      break;
+    default: /* MSI used as system clock */
+      msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
+      SystemCoreClock = (32768U * (1U << (msirange + 1U)));
+      break;
+  }
+  /* Compute HCLK clock frequency --------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;
+}
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/Drivers/CMSIS/Include/arm_common_tables.h

+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. October 2015
+* $Revision: 	V.1.4.5 a
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_common_tables.h
+*
+* Description:	This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+/* extern const q31_t realCoefAQ31[1024]; */
+/* extern const q31_t realCoefBQ31[1024]; */
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12  )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24  )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /*  ARM_COMMON_TABLES_H */

bsp/stm32l072/Drivers/CMSIS/Include/arm_const_structs.h

+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. March 2015
+* $Revision: 	V.1.4.5
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_const_structs.h
+*
+* Description:	This file has constant structs that are initialized for
+*              user convenience.  For example, some can be given as
+*              arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif

bsp/stm32l072/Drivers/CMSIS/Include/core_cmFunc.h

+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */

bsp/stm32l072/Drivers/CMSIS/Include/core_cmInstr.h

+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */

bsp/stm32l072/Drivers/CMSIS/Include/core_cmSimd.h

+/**************************************************************************//**
+ * @file     core_cmSimd.h
+ * @brief    CMSIS Cortex-M SIMD Header File
+ * @version  V4.30
+ * @date     20. October 2015
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if   defined ( __ICCARM__ )
+ #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #pragma clang system_header   /* treat file as system include file */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+/*------------------ RealView Compiler -----------------*/
+#if   defined ( __CC_ARM )
+  #include "cmsis_armcc.h"
+
+/*------------------ ARM Compiler V6 -------------------*/
+#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
+  #include "cmsis_armcc_V6.h"
+
+/*------------------ GNU Compiler ----------------------*/
+#elif defined ( __GNUC__ )
+  #include "cmsis_gcc.h"
+
+/*------------------ ICC Compiler ----------------------*/
+#elif defined ( __ICCARM__ )
+  #include <cmsis_iar.h>
+
+/*------------------ TI CCS Compiler -------------------*/
+#elif defined ( __TMS470__ )
+  #include <cmsis_ccs.h>
+
+/*------------------ TASKING Compiler ------------------*/
+#elif defined ( __TASKING__ )
+  /*
+   * The CMSIS functions have been implemented as intrinsics in the compiler.
+   * Please use "carm -?i" to get an up to date list of all intrinsics,
+   * Including the CMSIS ones.
+   */
+
+/*------------------ COSMIC Compiler -------------------*/
+#elif defined ( __CSMC__ )
+  #include <cmsis_csm.h>
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */

bsp/stm32l072/Drivers/SConscript

+import rtconfig
+Import('RTT_ROOT')
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+
+# The set of source files associated with this SConscript file.
+src = Split("""
+CMSIS/Device/ST/STM32L0xx/Source/Templates/system_stm32l0xx.c
+""")
+
+src += Glob('STM32L0xx_HAL_Driver/Src/*.c')
+
+
+#add for startup script
+if rtconfig.CROSS_TOOL == 'gcc':
+     src = src + ['CMSIS/Device/ST/STM32L0xx/Source/Templates/gcc/startup_stm32l072xx.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+     src = src + ['CMSIS/Device/ST/STM32L0xx/Source/Templates/arm/startup_stm32l072xx.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src = src + ['CMSIS/Device/ST/STM32L0xx/Source/Templates/iar/startup_stm32l072xx.s']
+
+path = [cwd + 'STM32L0xx_HAL_Driver/Inc',
+    cwd + 'CMSIS/Device/ST/STM32L0xx/Include',
+    cwd + '/CMSIS/Include']
+
+CPPDEFINES = ['USE_HAL_DRIVER', 'STM32L0X2']
+group = DefineGroup('STM32_HAL', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')

bsp/stm32l072/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_adc_ex.h

+/**
+  ******************************************************************************
+  * @file    stm32l0xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @version V1.7.0
+  * @date    31-May-2016
+  * @brief  This file contains all the functions prototypes for the ADC firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_ADC_EX_H
+#define __STM32L0xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_def.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ADCEx ADCEx
+  * @brief ADC driver modules
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Channel_Mode ADC Single Ended
+  * @{
+  */
+#define ADC_SINGLE_ENDED                        (uint32_t)0x00000000U   /* dummy value */
+/**
+  * @}
+  */
+
+/** @defgroup ADC_External_trigger_Source ADC External Trigger Source
+  * @{
+  */
+#define ADC_EXTERNALTRIGCONV_T6_TRGO            ((uint32_t)0x00000000U)
+#define ADC_EXTERNALTRIGCONV_T21_CC2            (ADC_CFGR1_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T2_TRGO            (ADC_CFGR1_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC4             (ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T22_TRGO           (ADC_CFGR1_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T3_TRGO            (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_EXT_IT11           (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0)
+#define ADC_SOFTWARE_START                      (ADC_CFGR1_EXTSEL + (uint32_t)1)
+
+/* ADC group regular external trigger TIM21_TRGO available only on            */
+/* STM32L0 devices categories: Cat.2, Cat.3, Cat.5                            */
+#if defined (STM32L031xx) || defined (STM32L041xx) || \
+    defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || \
+    defined (STM32L061xx) || defined (STM32L062xx) || defined (STM32L063xx) || \
+    defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \
+    defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
+#define ADC_EXTERNALTRIGCONV_T21_TRGO           (ADC_EXTERNALTRIGCONV_T22_TRGO)
+#endif
+
+/* ADC group regular external trigger TIM2_CC3 available only on              */
+/* STM32L0 devices categories: Cat.1, Cat.2, Cat.5                            */
+#if defined (STM32L011xx) || defined (STM32L021xx) || \
+    defined (STM32L031xx) || defined (STM32L041xx) || \
+    defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \
+    defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
+#define ADC_EXTERNALTRIGCONV_T2_CC3             (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0)
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_SYSCFG_internal_paths_flags_definition ADC SYSCFG internal paths Flags Definition
+  * @{
+  */
+#define ADC_FLAG_SENSOR         SYSCFG_CFGR3_VREFINT_RDYF
+#define ADC_FLAG_VREFINT        SYSCFG_VREFINT_ADC_RDYF
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macros ADCEx Private Macros
+  * @{
+  */
+
+#define IS_ADC_SINGLE_DIFFERENTIAL(SING_DIFF)   ((SING_DIFF) == ADC_SINGLE_ENDED)
+
+/** @defgroup ADCEx_calibration_factor_length_verification ADC Calibration Factor Length Verification
+  * @{
+  */
+/**
+  * @brief Calibration factor length verification (7 bits maximum)
+  * @param _Calibration_Factor_: Calibration factor value
+  * @retval None
+  */
+#define IS_ADC_CALFACT(_Calibration_Factor_) ((_Calibration_Factor_) <= ((uint32_t)0x7FU))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_External_trigger_Source ADC External Trigger Source
+  * @{
+  */
+#if defined (STM32L031xx) || defined (STM32L041xx) || \
+    defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || \
+    defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
+#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4   ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T21_TRGO ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_CC3   ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \
+                              ((CONV) == ADC_SOFTWARE_START))
+#elif defined (STM32L011xx) || defined (STM32L021xx)
+#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4   ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_CC3   ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \
+                              ((CONV) == ADC_SOFTWARE_START))
+#elif defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || \
+    defined (STM32L061xx) || defined (STM32L062xx) || defined (STM32L063xx)
+#define IS_ADC_EXTTRIG(CONV) (((CONV) == ADC_EXTERNALTRIGCONV_T6_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T21_CC2  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T2_CC4   ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T22_TRGO ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T21_TRGO ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_T3_TRGO  ) || \
+                              ((CONV) == ADC_EXTERNALTRIGCONV_EXT_IT11 ) || \
+                              ((CONV) == ADC_SOFTWARE_START))
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADCEx_Exported_Functions ADCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup ADCEx_Exported_Functions_Group3  Peripheral Control functions
+  * @{
+  */
+/* Exported functions --------------------------------------------------------*/
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef   HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+uint32_t            HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+HAL_StatusTypeDef   HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff, uint32_t CalibrationFactor);
+HAL_StatusTypeDef   HAL_ADCEx_EnableVREFINT(void);
+void                HAL_ADCEx_DisableVREFINT(void);
+HAL_StatusTypeDef   HAL_ADCEx_EnableVREFINTTempSensor(void);
+void                HAL_ADCEx_DisableVREFINTTempSensor(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32L0xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/Inc/mxconstants.h

+/**
+  ******************************************************************************
+  * File Name          : mxconstants.h
+  * Description        : This file contains the common defines of the application
+  ******************************************************************************
+  *
+  * COPYRIGHT(c) 2016 STMicroelectronics
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MXCONSTANT_H
+#define __MXCONSTANT_H
+  /* Includes ------------------------------------------------------------------*/
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private define ------------------------------------------------------------*/
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+*/
+
+#endif /* __MXCONSTANT_H */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32l072/SConscript

+# for module compiling
+import os
+Import('RTT_ROOT')
+
+cwd = str(Dir('#'))
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/stm32l072/stm32_rom.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00020000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00020000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x00005000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}