- 25 7月, 2018 9 次提交
-
-
由 Marcin Gałczyński 提交于
* Selective compilation * Optimized component.mk * Autoconnect WiFi now forces WiFi
-
由 Jan P. Schümann 提交于
When a package of size 0 arrives, "buf" is created, but never released. (Sorry, that was my mistake in the last patch)
-
由 Bin 提交于
* Add M5Stack-FIRE board * updated m5stack-fire boards.txt * remove pins 16 and 17
-
由 me-no-dev 提交于
-
由 Martin 提交于
Sketch for ESP32 boards that allow them to connect to WPA/WPA2 Enterprise Networks.
-
由 Schuemi 提交于
If you receive a package with a data length of zero, parsePacket returns 0, but rx_buffer will exist. So if another parsePacket with no read access returns to zeros, there is still data that can be read. This example would not work: https://www.arduino.cc/en/Reference/EthernetUDPParsePacket Also I added a check if rx_buffer exit when you try to flush it.
-
由 Ron M. Battle 提交于
* Add ttgo-lora32-v1 folder to variants folder * Add ttgo-lora32-v1 info to boards.txt * Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
-
由 chuck todd 提交于
This version no longer needs an interrupt for each byte transferred. It only needs interrupts for START, STOP, FIFO empty/Full or error conditions. This dramatically reduces the interrupt overhead. I think the prior version was causing an interrupt overload condition where the ISR was not able to process every interrupt as they happened.
-
由 Sathishkumar T 提交于
-
- 17 7月, 2018 6 次提交
-
-
由 Luc 提交于
-
由 me-no-dev 提交于
-
由 pacucha42 提交于
-
由 per1234 提交于
EEPROM.h uses data types which are declared through Arduino.h but that file does not contain an #include directive for Arduino.h. This does not cause any problems when the EEPROM library is #included from a .ino file because the Arduino IDE automatically adds an #include directive for Arduino.h but this is not the case for .cpp files. If a .cpp file has an #include directive for EEPROM.h that does not follow an #include directive for Arduino.h then compilation fails: E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:91:5: error: 'float_t' does not name a type float_t readFloat(int address); ^ E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:92:5: error: 'double_t' does not name a type double_t readDouble(int address); ^ E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:95:5: error: 'String' does not name a type String readString(int address); ^ E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:110:36: error: 'float_t' has not been declared size_t writeFloat(int address, float_t value); ^ E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:111:37: error: 'double_t' has not been declared size_t writeDouble(int address, double_t value); ^ E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:114:37: error: 'String' has not been declared size_t writeString(int address, String value);
-
由 Kryštof Černý 提交于
* Initial support for ALKS variant
-
由 me-no-dev 提交于
-
- 15 7月, 2018 1 次提交
-
-
由 me-no-dev 提交于
-
- 12 7月, 2018 2 次提交
-
-
由 chuck todd 提交于
the 'eject' ERROR is and indication of an interrupt triggering without an source. I am working to eliminate these serviceable interrupt. This update increase stability on a HelTek Wifi Lora 32 board. with a SSD1306 OLED. This update fixes a glaring error in the interrupt allocation code, the Interrupt mask was wrong. I also dynamically adjust the FiFo thresholds based on Bus clockrate. The change to FiFo thresholds has reduced the number for 'eject' events. I also change 'eject' from and ERROR to DEBUG. An 'eject' event does not compromise i2c transmissions. It happens after a transaction has completed. Chuck.
-
由 me-no-dev 提交于
-
- 11 7月, 2018 2 次提交
- 10 7月, 2018 4 次提交
-
-
由 me-no-dev 提交于
-
由 me-no-dev 提交于
-
由 brendanvanbreda 提交于
* Create pins_arduino.h * Update boards.txt * Update pins_arduino.h
-
由 pacucha42 提交于
-
- 07 7月, 2018 3 次提交
-
-
由 Bert Melis 提交于
* Allow using argument with attachInterrupt * formatting replace tabs with spaces * fix bug more then 1 interrupt * leftover * add example * make attachInterruptArg public * update example * leftover
-
由 Gottfried Haider 提交于
-
由 lbernstone 提交于
-
- 06 7月, 2018 3 次提交
- 05 7月, 2018 4 次提交
- 04 7月, 2018 6 次提交