- 24 10月, 2017 2 次提交
- 23 10月, 2017 1 次提交
-
-
由 me-no-dev 提交于
-
- 22 10月, 2017 1 次提交
-
-
由 chuck todd 提交于
The existing code did not follow protocol with 10bit addressed devices. Per _Philps/NXP Semiconductors UM10204 I2C-bus specification and user manual Rev. 6 4April2014_ pg.15 3.1.11 10-bit addressing: ~The first seven bits of the first byte are the combination of 1111 0xx of which the last two bits (xx) are the two Most-Significant Bits (MSB) of the 10-bit address; the eighth bit of the first byte is the R/!W! bit the determines the direction of the message~
-
- 21 10月, 2017 4 次提交
-
-
由 Jason K 提交于
-
由 Me No Dev 提交于
Missed definition
-
由 Me No Dev 提交于
Fixes: https://github.com/espressif/arduino-esp32/issues/749 Works even when single core mode is selected
-
由 chuck todd 提交于
The i2cWrite() function was returning to the app before the i2c transaction had completed. This caused the next Wire() call to return a I2C_ERROR_BUSY.
-
- 18 10月, 2017 1 次提交
-
-
由 me-no-dev 提交于
-
- 17 10月, 2017 4 次提交
-
-
由 rwaschhauser 提交于
-
由 Testato 提交于
-
由 Ted Timmons 提交于
-
由 Me No Dev 提交于
-
- 14 10月, 2017 4 次提交
-
-
由 Me No Dev 提交于
-
由 me-no-dev 提交于
Usable for library developers who write code not dependent on Arduino. Adding 3 lines to the includes will permit their debug messages to be visible in Arduino IDE or when enabled under IDF
-
由 me-no-dev 提交于
-
由 Me No Dev 提交于
* Update IDF to de750e9 * Add BLE Library submodule
-
- 13 10月, 2017 2 次提交
-
-
由 Ewald Wasscher 提交于
Added argument to HardwareSerial.begin to specify whether the logic levels of the UART rx and tx lines should be inverted (#719)
-
由 Rafa Couto 提交于
* ESP32 default port in comment * ESP32 default hostname.
-
- 12 10月, 2017 1 次提交
-
-
- 11 10月, 2017 2 次提交
-
-
由 Allan 提交于
* Create ledcWrite_demo_ESP32_RGB.ino adding the public domain example ledcWrite_demo_ESP32.ino to this repo. Added RGB to the name for people searching, added some comments, and renames things to make a bit more sense. * Update ledcWrite_demo_ESP32_RGB.ino renamed to ledcWrite_RGB.ino and added a couple more comments based on https://github.com/espressif/arduino-esp32/issues/689 * Rename libraries/ESP32/examples/AnalogOut/ledcWrite_demo_ESP32_RGB/ledcWrite_demo_ESP32_RGB.ino to libraries/ESP32/examples/AnalogOut/ledcWrite_RGB/ledcWrite_RGB.ino Renamed.
-
由 Kevin van den Broek 提交于
-
- 09 10月, 2017 3 次提交
-
-
-
由 me-no-dev 提交于
-
由 chuck todd 提交于
Fix redefines of strXXX, original was using strnXXX with length set to 0x7fffffff. This caused problems with strcpy and strcat. The destination buffer was NULL'd to 0x7fffffff which killed the app.
-
- 08 10月, 2017 1 次提交
-
-
由 Testato 提交于
* Chip revision fix https://www.esp32.com/viewtopic.php?f=2&t=1358&sid=f77cd62ec254317f3bbb30d8ab75ca2a&start=10 * using of esp_chip_info instead of register reading
-
- 04 10月, 2017 2 次提交
-
-
由 Angus Gratton 提交于
Fixes #694
-
由 copercini 提交于
* Print error when serial number is invalid * Move to the first check, change end by return
-
- 01 10月, 2017 2 次提交
- 30 9月, 2017 2 次提交
-
-
由 Me No Dev 提交于
- 29 9月, 2017 5 次提交
-
-
由 me-no-dev 提交于
-
由 Jason K 提交于
* Addition of a i2cReset method and timeout handling for the case where the i2c hardware FSM (state machine) gets stuck in a busy state. * Use newly added i2cReset function within the wire library.
-
由 Frederik 提交于
* Add example to update ESP32 via SD card * Delete update.bin from sd upon finishing update * remove precompiled binary from example * Check whether update.bin is a file
-
由 me-no-dev 提交于
-
由 me-no-dev 提交于
-
- 28 9月, 2017 3 次提交