- 04 3月, 2021 1 次提交
-
-
由 Maximilian Gerhardt 提交于
-
- 02 3月, 2021 2 次提交
-
-
由 Aron Rubin 提交于
Fixed use of CONFIG_BLUEDROID_ENABLED instead of CONFIG_BT_ENABLED in HAL. This prevented compilation with Nimble-only configuration without apparent benefit.
-
由 Me No Dev 提交于
- File might not eval to false if opened with write/append and SD is gone - Allow card to be formatted if FAT partition was not found - Mark card as gone in certain situations - Fix several logic errors in low level SD API
-
- 25 2月, 2021 2 次提交
-
-
由 lbernstone 提交于
* Add div by zero check back into WMath::map * include esp32-hal-log.h Co-authored-by: NMe No Dev <me-no-dev@users.noreply.github.com>
-
-
- 23 2月, 2021 6 次提交
-
-
由 ketri2484 提交于
Co-authored-by: Nketri-kjy <jinyoung@ketri.re.kr> Co-authored-by: Nketri2484 <ketri2484@gamil.com>
-
由 Me No Dev 提交于
esp-face: master 420fc7e esp32-camera: master a5ccbec
-
由 martirius 提交于
With this PR user can select to use the original ESP-IDF log instead of the redefined one. User can also redefine the log function as per [Logging Library](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/log.html#_CPPv419esp_log_set_vprintf14vprintf_like_t) so he can for example redirect logs to a file. To enable this change just add -DUSE_ESP32_LOG to build flags. User can also change the default TAG (that now is ES32) to whatever it wants adding '-DTAG="tag_value"' to build flags
-
由 Me No Dev 提交于
-
由 Bascy 提交于
Allows BLEAddress to be used as key in std::map etc
-
由 Clemens Kirchgatterer 提交于
mbedTLS requires repeated calls to mbedtls_ssl_write() whenever it returns MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE. this happens when the client sends data faster then the server or the connection can handle.
-
- 18 2月, 2021 3 次提交
-
-
由 me-no-dev 提交于
-
由 Clemens Kirchgatterer 提交于
The temp buffer serves no purpose here. Also mbedtls_strerror can be called with size == 0 safely.
-
由 Andrew Zaborowski 提交于
Add the Wemos Lolin32 Lite (no longer being produced same as Lolin32) and the TTGO T7 v1.3 and v1.4 boards (status unknown). All three are rather generic ESP32 boards the main difference being pin layouts.
-
- 17 2月, 2021 2 次提交
- 16 2月, 2021 8 次提交
-
-
由 Emanuel Posescu 提交于
- Remove client from the list of devices in case registration fails - Filter other events not related to registration during registration phase - Cleanup if connect fails - Reset if after disconnect - Disconnect callback *after* cleanup is done so object can be deleted This fixes some of the issues I had like: - `BLEClient::connect` hangs up and never recovered because registration failed - `BLEClient` could not be deleted after disconnect or deletion creating ghost events https://github.com/espressif/arduino-esp32/issues/4047 - `BLEClient` could not be properly reused after a connection was attempted (successful or not) * Cleanup in case of registration and connect failure. Cleanup before calling disconnect callback for safe delete. Reject other events during registration. Adresses #4047, #4055 * Clear if after unregister #4047
-
由 Markus Frey 提交于
fixes #4596 * Prevent possible undefined behaviour by get methods not taking an index as parameter * Add methods to get the count of service data UUIDs and service UUIDs * Various code improvements
-
由 me-no-dev 提交于
-
由 Andre Lorbach 提交于
The variable is useful when debugging AsyncUDP send problems. The upper application can read and analyze the error reason.
-
由 ushiboy 提交于
* Fixed crash on delete after disconnect * Fixed memory leak when getting characteristics * Removed guard Co-authored-by: Nushiboy <ushiboy.dev@gmail.com>
-
由 Szymon Zmilczak 提交于
-
由 Mitch Bradley 提交于
* Speed up upload by a factor of 17 Uploads are very slow because of an unnecessary "client.connected()" check in _uploadReadByte(). Here is what happens: client.connected() is called for every byte read. WiFiClient::connected() calls recv(fd(), &dummy, 0, MSG_DONTWAIT); which takes a relatively long time, so the optimized path of returning a buffered byte via client.read() is effectively nullified. Removing the one line changed the upload speed for a 2 MB file (discarding the received data) from 22 KB/sec (before) to 367 KB/sec (after). The change is safe in the face of disconnects because client.read(), when it no longer has buffered data, calls (WiFiClient) fillBuffer(), which calls recv(), so the disconnection will be detected in due course. * Move disconnect check into the timeout loop
-
由 Me No Dev 提交于
* Update IDF to d8082b7f3
-
- 04 2月, 2021 1 次提交
-
-
- 03 2月, 2021 2 次提交
-
-
- 27 1月, 2021 1 次提交
-
-
由 Valerii Koval 提交于
-
- 21 1月, 2021 4 次提交
-
-
由 Me No Dev 提交于
-
由 Me No Dev 提交于
Co-authored-by: Nme-no-dev <me-no-dev@github.com>
-
由 estshorter 提交于
-
由 Emanuel Posescu 提交于
-
- 16 1月, 2021 1 次提交
-
-
由 bot1131357 提交于
-
- 14 1月, 2021 1 次提交
-
-
由 Me No Dev 提交于
-
- 12 1月, 2021 3 次提交
- 11 1月, 2021 3 次提交
-
-
由 Me No Dev 提交于
esp-face: master 420fc7e esp32-camera: master 0107093
-
由 Keegan Morrow 提交于
-
由 richardclli 提交于
Added authentication callbacks and example, resolves #4622.
-