提交 a53c9de0 编写于 作者: M Martin 提交者: Me No Dev

Updated table of tested locations - Enterprise wifi networks - WifiClientEnterprise (#1980)

* Updated table of tested locations

* updated
上级 b58a3509
# ESP32-Eduroam
* Eduroam wifi connection with university login identity
* Working under Eduroam networks under FreeRadius service for 802.1x
* Eduroam is using methods: PEAP + MsCHAPv2
* Working under Eduroam networks worldwide
* Methods: PEAP + MsCHAPv2
# Format
* IDENTITY = nickname@university.domain
* PASSWORD = your password
* IDENTITY = youridentity --> if connecting from different university, use youridentity@youruniversity.domain format
* PASSWORD = yourpassword
# Usage
* Change IDENTITY
* Change password
* Upload sketch and enjoy!
* After sucessful assign of IP address, board will connect to HTTP page on internet to verify your authentification
* Board will auto reconnect to Eduroam if it lost connection
# Tested locations
* Technical University in Košice (Slovakia) - Working
* Slovak Technical University in Bratislava (Slovakia) - Working
* University of Antwerp (Belgium) - Working
* UPV Universitat Politècnica de València (Spain) - Working
* Local RADIUS network under Linux Zeroshell - Unsuccessful connection
|University|Board|Method|Result|
|-------------|-------------| -----|------|
|Technical University in Košice (Slovakia)|ESP32 Devkit v1|PEAP + MsCHAPv2|Working|
|Technical University in Košice (Slovakia)|ESP32 DevKitc v4|PEAP + MsCHAPv2|Working|
|Slovak Technical University in Bratislava (Slovakia)|ESP32 Devkit v1|PEAP + MsCHAPv2|Working|
|University of Antwerp (Belgium)|Lolin32|PEAP + MsCHAPv2|Working|
|UPV Universitat Politècnica de València (Spain)|ESP32 Devmodule v4|PEAP + MsCHAPv2|Working|
|Local Zeroshell powered network|ESP32 Devkit v1|PEAP + MsCHAPv2|*Not working*|
|Hasselt University (Belgium)|xxx|PEAP + MsCHAPv2|Working with fix sketch|
|Universidad de Granada (Spain)|Lolin D32 Pro|PEAP + MsCHAPv2|Working|
|Universidad de Granada (Spain)|Lolin D32|PEAP + MsCHAPv2|Working|
|Universidade Federal de Santa Catarina (Brazil)|xxx|EAP-TTLS + MsCHAPv2|Working|
|University of Regensburg (Germany)|Lolin32|PEAP + MsCHAPv2|Working|
# Common errors - Switch to Debug mode for Serial monitor prints
|Error|Appearance|Solution|
|-------------|-------------|-------------|
|wifi: Set status to INIT|Frequent|Hold EN button for few seconds|
|HANDSHAKE_TIMEOUT|Rare|Bug was found under Zeroshell RADIUS authentization - Unsucessful connection|
|AUTH_EXPIRE|Common|In the case of weak wifi network signal, this error is quite common, bring your device closer to AP|
|ASSOC_EXPIRE|Rare|-|
# Sucessful connection example
![alt text](https://i.nahraj.to/f/24Kc.png)
# Unsucessful connection example
![alt text](https://camo.githubusercontent.com/87e47d1b27f4e8ace87423e40e8edbce7983bafa/68747470733a2f2f692e6e616872616a2e746f2f662f323435572e504e47)
# Boards
* Tested Under ESP32 Devkit v1
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册