Skip to content

A
arduino-esp32

QWFLS / arduino-esp32
与 Fork 源项目一致

从无法访问的项目Fork

通知 0
Star 0
Fork 0
A
arduino-esp32

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

未验证 提交 4b930b23 编写于 作者: D Dogus Cendek 提交者： GitHub
浏览文件
操作

Updated pins_arduino.h and board.txt of Deneyap Development Boards (#7854) 

* Updated Pins of Devkits

Deleted soc_caps.h library and related commands at Deneyap Kart 1A v2, Deneyap Kart 1A, Deneyap Mini and Deneyap Mini v2.
Added TX1 and RX1 pins and updated LED pin definition at all Devkits.
Added BOOT (BT) pins at Deneyap Kart, Deneyap Kart 1A, Deneyap Mini and Deneyap Kart G.
Changed D0 and D1 pin numbers at Deneyap Kart G.
Changed D12, D13, D14, D15, PWM0 and PWM1 pin numbers at Deneyap Kart 1A v2.
Added A8, T0, T1, T2, T3, T4, T5, T6, T7, T8, D16, D17, D18, D19, PWM2, PWM3, PWM4 and BAT pin numbers at Deneyap Kart 1A v2.
Changed A2, A3, A4 (T0) and A5 (T1) pin numbers at Deneyap Kart and Deneyap Kart 1A.
Renamed DA2 (DAC2) pin as DA0 (DAC0) and changed DAC1 and DAC2 pin numbers at Deneyap Mini and Deneyap Mini v2.

* Updated board.txt of all Devkits

Updated board.txt of all Devkits
上级 6d64a3b6
展开全部 隐藏空白更改
内联 并排
Showing with 484 addition and 310 deletion
boards.txt
浏览文件 @ 4b930b23
此差异已折叠。
variants/deneyapkart/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -11,53 +11,56 @@
#define digitalPinToInterrupt(p) (((p)<40)?(p):-1)
#define digitalPinHasPWM(p) (p < 34)
#define LEDR 3
#define LEDG 1
#define LEDB 4
#define BUILTIN_LED LEDB
#define LED_BUILTIN LEDB // backward compatibility
//#define RGB_BUILTIN LED_BUILTIN
static const uint8_t GPKEY = 0;
static const uint8_t LED_BUILTIN = 4;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define LEDB LED_BUILTIN
#define LEDR 3
#define LEDG 1
#define LEDB 4
static const uint8_t GPKEY = 0;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
#define BOOT GPKEY
static const uint8_t TX = 1;
static const uint8_t RX = 3;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 4;
static const uint8_t SCL = 15;
static const uint8_t SS = 21;
static const uint8_t SS = 21;
static const uint8_t MOSI = 5;
static const uint8_t MISO = 18;
static const uint8_t SCK = 19;
static const uint8_t SCK = 19;
static const uint8_t A0 = 36;
static const uint8_t A1 = 39;
static const uint8_t A2 = 32;
static const uint8_t A3 = 33;
static const uint8_t A4 = 34;
static const uint8_t A5 = 35;
static const uint8_t A2 = 34;
static const uint8_t A3 = 35;
static const uint8_t A4 = 32;
static const uint8_t A5 = 33;
static const uint8_t T0 = 34;
static const uint8_t T1 = 35;
static const uint8_t T0 = 32;
static const uint8_t T1 = 33;
static const uint8_t T2 = 27;
static const uint8_t T3 = 14;
static const uint8_t T4 = 12;
static const uint8_t T5 = 13;
static const uint8_t D0 = 23;
static const uint8_t D1 = 22;
static const uint8_t D2 = 1;
static const uint8_t D3 = 3;
static const uint8_t D4 = 21;
static const uint8_t D5 = 19;
static const uint8_t D6 = 18;
static const uint8_t D7 = 5;
static const uint8_t D8 = 0;
static const uint8_t D9 = 2;
static const uint8_t T5 = 13;
static const uint8_t D0 = 23;
static const uint8_t D1 = 22;
static const uint8_t D2 = 1;
static const uint8_t D3 = 3;
static const uint8_t D4 = 21;
static const uint8_t D5 = 19;
static const uint8_t D6 = 18;
static const uint8_t D7 = 5;
static const uint8_t D8 = 0;
static const uint8_t D9 = 2;
static const uint8_t D10 = 4;
static const uint8_t D11 = 15;
static const uint8_t D12 = 13;
......
variants/deneyapkart1A/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -2,62 +2,64 @@
#define Pins_Arduino_h
#include <stdint.h>
#include "soc/soc_caps.h"
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 40
#define NUM_ANALOG_INPUTS 16
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+13;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<40)?(p):-1)
#define digitalPinHasPWM(p) (p < 34)
static const uint8_t GPKEY = 0;
static const uint8_t LED_BUILTIN = 13;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
static const uint8_t GPKEY = 0;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
#define BOOT GPKEY
static const uint8_t TX = 1;
static const uint8_t RX = 3;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 4;
static const uint8_t SCL = 15;
static const uint8_t SS = 21;
static const uint8_t SS = 21;
static const uint8_t MOSI = 5;
static const uint8_t MISO = 18;
static const uint8_t SCK = 19;
static const uint8_t SCK = 19;
static const uint8_t A0 = 36;
static const uint8_t A1 = 39;
static const uint8_t A2 = 32;
static const uint8_t A3 = 33;
static const uint8_t A4 = 34;
static const uint8_t A5 = 35;
static const uint8_t A2 = 34;
static const uint8_t A3 = 35;
static const uint8_t A4 = 32;
static const uint8_t A5 = 33;
static const uint8_t T0 = 34;
static const uint8_t T1 = 35;
static const uint8_t T0 = 32;
static const uint8_t T1 = 33;
static const uint8_t T2 = 27;
static const uint8_t T3 = 14;
static const uint8_t T4 = 12;
static const uint8_t T5 = 13;
static const uint8_t D0 = 23;
static const uint8_t D1 = 22;
static const uint8_t D2 = 1;
static const uint8_t D3 = 3;
static const uint8_t D4 = 21;
static const uint8_t D5 = 19;
static const uint8_t D6 = 18;
static const uint8_t D7 = 5;
static const uint8_t D8 = 0;
static const uint8_t D9 = 2;
static const uint8_t T5 = 13;
static const uint8_t D0 = 23;
static const uint8_t D1 = 22;
static const uint8_t D2 = 1;
static const uint8_t D3 = 3;
static const uint8_t D4 = 21;
static const uint8_t D5 = 19;
static const uint8_t D6 = 18;
static const uint8_t D7 = 5;
static const uint8_t D8 = 0;
static const uint8_t D9 = 2;
static const uint8_t D10 = 4;
static const uint8_t D11 = 15;
static const uint8_t D12 = 13;
......
variants/deneyapkart1Av2/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -2,7 +2,6 @@
#define Pins_Arduino_h
#include <stdint.h>
#include "soc/soc_caps.h"
#define USB_VID 0x303A
#define USB_PID 0x8147
......@@ -14,60 +13,80 @@
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+48;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
static const uint8_t GPKEY = 0;
static const uint8_t LED_BUILTIN = 48;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
static const uint8_t GPKEY = 0;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t TX = 43;
static const uint8_t RX = 44;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 47;
static const uint8_t SCL = 21;
static const uint8_t SDA = 47;
static const uint8_t SCL = 21;
static const uint8_t SS = 42;
static const uint8_t MOSI = 39;
static const uint8_t MISO = 40;
static const uint8_t SCK = 41;
static const uint8_t A0 = 4;
static const uint8_t A1 = 5;
static const uint8_t A2 = 6;
static const uint8_t A3 = 7;
static const uint8_t A4 = 15;
static const uint8_t A5 = 16;
static const uint8_t A6 = 17;
static const uint8_t A7 = 18;
static const uint8_t D0 = 1;
static const uint8_t D1 = 2;
static const uint8_t D2 = 43;
static const uint8_t D3 = 44;
static const uint8_t D4 = 42;
static const uint8_t D5 = 41;
static const uint8_t D6 = 40;
static const uint8_t D7 = 39;
static const uint8_t D8 = 38;
static const uint8_t D9 = 48;
static const uint8_t D10 = 47;
static const uint8_t D11 = 21;
static const uint8_t D12 = 0;
static const uint8_t D13 = 10;
static const uint8_t D14 = 3;
static const uint8_t D15 = 8;
static const uint8_t PWM0 = 1;
static const uint8_t PWM1 = 2;
static const uint8_t A0 = 4;
static const uint8_t A1 = 5;
static const uint8_t A2 = 6;
static const uint8_t A3 = 7;
static const uint8_t A4 = 15;
static const uint8_t A5 = 16;
static const uint8_t A6 = 17;
static const uint8_t A7 = 18;
static const uint8_t A8 = 9;
static const uint8_t T0 = 4;
static const uint8_t T1 = 5;
static const uint8_t T2 = 6;
static const uint8_t T3 = 7;
static const uint8_t T4 = 8;
static const uint8_t T5 = 3;
static const uint8_t T6 = 10;
static const uint8_t T7 = 1;
static const uint8_t T8 = 2;
static const uint8_t D0 = 1;
static const uint8_t D1 = 2;
static const uint8_t D2 = 43;
static const uint8_t D3 = 44;
static const uint8_t D4 = 42;
static const uint8_t D5 = 41;
static const uint8_t D6 = 40;
static const uint8_t D7 = 39;
static const uint8_t D8 = 38;
static const uint8_t D9 = 48;
static const uint8_t D10 = 47;
static const uint8_t D11 = 21;
static const uint8_t D12 = 10;
static const uint8_t D13 = 3;
static const uint8_t D14 = 8;
static const uint8_t D15 = 0;
static const uint8_t D16 = 13;
static const uint8_t D17 = 12;
static const uint8_t D18 = 11;
static const uint8_t D19 = 14;
static const uint8_t PWM0 = 15;
static const uint8_t PWM1 = 16;
static const uint8_t PWM2 = 17;
static const uint8_t PWM3 = 18;
static const uint8_t PWM4 = 38;
static const uint8_t CAMSD = 4;
static const uint8_t CAMSC = 5;
......@@ -89,4 +108,6 @@ static const uint8_t SDMO = 12;
static const uint8_t SDCS = 11;
static const uint8_t SDCK = 13;
static const uint8_t BAT = 9;
#endif /* Pins_Arduino_h */
variants/deneyapkartg/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -2,7 +2,6 @@
#define Pins_Arduino_h
#include <stdint.h>
#include "soc/soc_caps.h"
#define USB_VID 0x303A
#define USB_PID 0x814A
......@@ -14,31 +13,34 @@
#define NUM_DIGITAL_PINS 22
#define NUM_ANALOG_INPUTS 6
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+10;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
#define analogInputToDigitalPin(p) (((p)<NUM_ANALOG_INPUTS)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<NUM_DIGITAL_PINS)?(p):-1)
#define digitalPinHasPWM(p) (p < EXTERNAL_NUM_INTERRUPTS)
static const uint8_t GPKEY = 9;
static const uint8_t LED_BUILTIN = 10;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
static const uint8_t GPKEY = 9;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
#define BT GPKEY
static const uint8_t TX = 21;
static const uint8_t RX = 20;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 8;
static const uint8_t SCL = 2;
static const uint8_t SS = 7;
static const uint8_t MOSI = 6;
static const uint8_t MISO = 5;
static const uint8_t SCK = 4;
static const uint8_t SS = 7;
static const uint8_t MOSI = 6;
static const uint8_t MISO = 5;
static const uint8_t SCK = 4;
static const uint8_t A0 = 0;
static const uint8_t A1 = 1;
......@@ -47,8 +49,8 @@ static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t D0 = 21;
static const uint8_t D1 = 20;
static const uint8_t D0 = 20;
static const uint8_t D1 = 21;
static const uint8_t D2 = 9;
static const uint8_t D3 = 10;
static const uint8_t D4 = 8;
......
variants/deneyapmini/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -17,28 +17,31 @@
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
#define LEDR 34
#define LEDG 33
#define LEDB 35
#define BUILTIN_LED LEDB
#define LED_BUILTIN LEDB // backward compatibility
//#define RGB_BUILTIN LED_BUILTIN
static const uint8_t GPKEY = 0;
static const uint8_t LED_BUILTIN = 35;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define LEDB LED_BUILTIN
#define LEDR 34
#define LEDG 33
#define LEDB 35
static const uint8_t GPKEY = 0;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
#define BT GPKEY
static const uint8_t TX = 43;
static const uint8_t RX = 44;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 36;
static const uint8_t SCL = 37;
static const uint8_t SS = 21;
static const uint8_t MOSI = 40;
static const uint8_t MISO = 39;
static const uint8_t SCK = 38;
static const uint8_t SS = 21;
static const uint8_t MOSI = 40;
static const uint8_t MISO = 39;
static const uint8_t SCK = 38;
static const uint8_t A0 = 8;
static const uint8_t A1 = 9;
......@@ -49,22 +52,22 @@ static const uint8_t A5 = 13;
static const uint8_t A6 = 16;
static const uint8_t T0 = 8;
static const uint8_t T1 = 9;
static const uint8_t T1 = 9;
static const uint8_t T2 = 10;
static const uint8_t T3 = 11;
static const uint8_t T4 = 12;
static const uint8_t T5 = 13;
static const uint8_t D0 = 44;
static const uint8_t D1 = 43;
static const uint8_t D2 = 42;
static const uint8_t D3 = 41;
static const uint8_t D4 = 40;
static const uint8_t D5 = 39;
static const uint8_t D6 = 38;
static const uint8_t D7 = 37;
static const uint8_t D8 = 36;
static const uint8_t D9 = 26;
static const uint8_t D0 = 44;
static const uint8_t D1 = 43;
static const uint8_t D2 = 42;
static const uint8_t D3 = 41;
static const uint8_t D4 = 40;
static const uint8_t D5 = 39;
static const uint8_t D6 = 38;
static const uint8_t D7 = 37;
static const uint8_t D8 = 36;
static const uint8_t D9 = 26;
static const uint8_t D10 = 21;
static const uint8_t D11 = 18;
static const uint8_t D12 = 17;
......@@ -76,7 +79,17 @@ static const uint8_t D16 = 34;
static const uint8_t PWM0 = 42;
static const uint8_t PWM1 = 41;
static const uint8_t DAC1 = 17;
static const uint8_t DAC2 = 18;
static const uint8_t DAC0 = 17;
static const uint8_t DAC1 = 18;
#define SD SDA
#define SC SCL
#define MO MOSI
#define MI MISO
#define MC SCK
#define DA0 DAC0
#define DA1 DAC1
#endif /* Pins_Arduino_h */
variants/deneyapminiv2/pins_arduino.h
浏览文件 @ 4b930b23
......@@ -2,7 +2,6 @@
#define Pins_Arduino_h
#include <stdint.h>
#include "soc/soc_caps.h"
#define USB_VID 0x303A
#define USB_PID 0x8144
......@@ -14,31 +13,33 @@
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT+33;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
static const uint8_t GPKEY = 0;
static const uint8_t LED_BUILTIN = 33;
#define BUILTIN_LED LED_BUILTIN
#define LED_BUILTIN LED_BUILTIN
#define RGB_BUILTIN LED_BUILTIN
#define RGBLED LED_BUILTIN
#define RGB_BRIGHTNESS 64
static const uint8_t GPKEY = 0;
#define KEY_BUILTIN GPKEY
#define BUILTIN_KEY GPKEY
static const uint8_t TX = 43;
static const uint8_t RX = 44;
#define TX1 TX
#define RX1 RX
static const uint8_t SDA = 36;
static const uint8_t SCL = 37;
static const uint8_t SS = 21;
static const uint8_t MOSI = 40;
static const uint8_t MISO = 39;
static const uint8_t SCK = 38;
static const uint8_t SS = 21;
static const uint8_t MOSI = 40;
static const uint8_t MISO = 39;
static const uint8_t SCK = 38;
static const uint8_t A0 = 7;
static const uint8_t A1 = 8;
......@@ -57,16 +58,16 @@ static const uint8_t T4 = 11;
static const uint8_t T5 = 12;
static const uint8_t T6 = 13;
static const uint8_t D0 = 44;
static const uint8_t D1 = 43;
static const uint8_t D2 = 42;
static const uint8_t D3 = 41;
static const uint8_t D4 = 40;
static const uint8_t D5 = 39;
static const uint8_t D6 = 38;
static const uint8_t D7 = 37;
static const uint8_t D8 = 36;
static const uint8_t D9 = 26;
static const uint8_t D0 = 44;
static const uint8_t D1 = 43;
static const uint8_t D2 = 42;
static const uint8_t D3 = 41;
static const uint8_t D4 = 40;
static const uint8_t D5 = 39;
static const uint8_t D6 = 38;
static const uint8_t D7 = 37;
static const uint8_t D8 = 36;
static const uint8_t D9 = 26;
static const uint8_t D10 = 21;
static const uint8_t D11 = 18;
static const uint8_t D12 = 17;
......@@ -76,7 +77,17 @@ static const uint8_t D14 = 33;
static const uint8_t PWM0 = 42;
static const uint8_t PWM1 = 41;
static const uint8_t DAC1 = 17;
static const uint8_t DAC2 = 18;
static const uint8_t DAC0 = 17;
static const uint8_t DAC1 = 18;
#define SD SDA
#define SC SCL
#define MO MOSI
#define MI MISO
#define MC SCK
#define DA0 DAC0
#define DA1 DAC1
#endif /* Pins_Arduino_h */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或