- 07 9月, 2022 4 次提交
-
-
由 liyangyang 提交于
-
由 Yifang 提交于
* [add] board/Kconfig 完善SPI3部分 * [add] 提交代码注释 Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
-
由 o777788 提交于
fix flexcan driver for imxrt1170
-
由 嵌入式路上的流浪 提交于
-
- 06 9月, 2022 5 次提交
-
-
由 Freey0 提交于
-
由 xuhonghao 提交于
使用APM32F407VGT6芯片发现shell命令行无法接收命令,解决shell命令行输入问题 将board.c中的: GPIO_ConfigStruct.mode = GPIO_MODE_IN; GPIO_ConfigStruct.pupd = GPIO_PUPD_UP; 修改为: GPIO_ConfigStruct.mode = GPIO_MODE_AF; GPIO_ConfigStruct.pupd = GPIO_PUPD_NOPULL; 使用APM32F407VGT6测试成功
-
由 Fan Yang 提交于
* Add CANFD support and correct typos - Added CANFD required fields to can.h - Fixed typos in can.h and can.c - Corrected all the projects affected by the typo - Fixed wrong line-ending in some affected can driver files Signed-off-by: NFan YANG <fan.yang@hpmicro.com> * update * bsp: support boards from hpmicro - Supported HPM6750EVKMINI - Supported HPM6750EVK Signed-off-by: NFan YANG <fan.yang@hpmicro.com> Signed-off-by: NFan YANG <fan.yang@hpmicro.com> Co-authored-by: Meco Man <920369182@qq.com>
-
由 linshire 提交于
-
由 lhylhylhy6 提交于
-
- 05 9月, 2022 4 次提交
-
-
由 linshire 提交于
* add Kconfig file "USART2~USART8"
-
由 o777788 提交于
-
由 Zhang WenBin 提交于
-
由 o777788 提交于
-
- 02 9月, 2022 7 次提交
-
-
由 liYangYang 提交于
-
由 100ask-alen 提交于
-
由 鹅福哥 提交于
-
由 鹅福哥 提交于
-
由 鹅福哥 提交于
-
由 winfenggao 提交于
* 增加printf格式2进制和8进制,RT_KPRINTF_USING_LONGLONG 和 RT_PRINTF_SPECIAL 做了相应处理
-
由 self-confident neko 提交于
* Update drv_usart.h CH32V307的串口1外设是对接在APB2桥上,其他串口均对接在APB1桥上 已完全测试,并发现一个问题,已修正。
-
- 01 9月, 2022 6 次提交
-
-
由 o777788 提交于
* add ignore files and directories * 消除编译警告;修正板级配置信息
-
由 liYangYang 提交于
* [pwm]Improve the code * 将与bsp无关的代码移植到框架部分 * 添加注释
-
由 liYangYang 提交于
修复 rt_spi_sendrecv16 api 对最高有效位(MSB or LSB)的处理不当造成的一些问题。 https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/SPI/src/SPI.cpp#L273
-
由 o777788 提交于
update README
-
由 o777788 提交于
* add ignore files and directories * add flexcan support;fix build problem * 优化格式,消除编译警告 * 增加can引脚分配;支持imxrt1170 * 优化格式
-
由 Yunjie Gu 提交于
-
- 31 8月, 2022 8 次提交
-
-
由 guozhanxin 提交于
-
由 Rbb666 提交于
-
由 Rbb666 提交于
-
由 沙子屑耶 提交于
-
由 沙子屑耶 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
- 30 8月, 2022 4 次提交
-
-
由 o777788 提交于
-
由 o777788 提交于
-
由 o777788 提交于
1、修复ksz8081.c编译错误; 2、修复rt1170网络驱动问题
-
由 wannomore 提交于
解决 tms320f28379d bsp 启动的问题。主要改动如下。 修正context.s中汇编代码错误。在旧版的代码中,操作数为32位而汇编命令却使用了针对16位数据的命令MOV,导致程序在某些情况无法正常启动线程。 由于C28x的平台下,SP只支持16bit寻址,所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间,针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持,方便调试。 新增rtdef.h中RT_SECTION,RT_USED,ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空,导致INIT_EXPORT注册的函数失效。 修改程序启动代码,在程序入口直接调用原生启动代码 以上改动在LAUNCHXL-F28379D 通过了测试。
-
- 28 8月, 2022 2 次提交
-
-
由 mysterywolf 提交于
-
由 洩氏诹诹子 提交于
-