* [ch32v307] update Chinese readme

* add English readme

* [bsp/stm32] 将spi DMA传输更改为阻塞线程方式

* Update bsp/stm32/libraries/HAL_Drivers/drv_spi.h
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

In [1] we prefixed ARC Timer functions with "arc_"
and now we need to accommodate that change in RT-Thread
accordingly.

[1] https://github.com/foss-for-synopsys-dwc-arc-processors/embarc_bsp/commit/86a03d4bf99c8afad68c4c6a5941cda7a41dd4fe

In Python 3.x "print" is a function, not a command,
thus it requires braces around its arguments.

Otherwise build system fails to proceed.

* [bsp][ch32v307]添加了 pwm 驱动

1. 在c28x文件目录上一层再套一层文件夹ti，目前28379的项目路径为rt-thread\bsp\ti\c28x\tms320f28379d
2. 新增adc驱动与kconfig配置

* [add] 新增README文档说明

瑞萨RA6M4开发板对segger_rtt使用通知

* Update README.md
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

1. DDR timing setting.
2. README.md
3. Remove unused files.

1. 增加PWM模块的配置kconfig代码
2. 调整目录结构，新增c28x文件夹，将原有tms320f28379的porting移动至c28x文件夹下，通用设备驱动移动至c28x/libraries下
3. 增加gpio驱动代码以及外部中断触发驱动代码

目前已经在tms320f28379上通过测试

CH32V307 添加can驱动。
CAN1和CAN2均可以使用，而且调整好波特率

* [bsp][sconscript] 整理统一sconscript格式

* update

* update

* 修改部分菜单

* change again

* 修改RT_USING为BSP_USING

* Update SConscript

* Update SConscript
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>

添加了 ch32v307 看门狗驱动，已在 ch32v307评估板验证；
修改了 rt-thread\bsp\wch\risc-v\ch32v307v-r1\board 目录下的 Kconfig 文件；
修改了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 SConscript 文件；
添加了 rt-thread\bsp\wch\risc-v\Libraries\ch32_drivers 目录下的 drv_iwdt.c 文件；

* first copy

* [GD32][BSP]添加GD32303C-START开发板

* 更新yml文件

* 更新scons脚本

增加c28x芯片的pwm驱动
已经在TMS320F28379中通过测试
pwm设备框架增加如下方法：
#define PWM_CMD_SET_DEAD_TIME (RT_DEVICE_CTRL_BASE(PWM) + 8)
#define PWM_CMD_SET_PHASE (RT_DEVICE_CTRL_BASE(PWM) + 9)
#define PWM_CMD_ENABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 10)
#define PWM_CMD_DISABLE_IRQ (RT_DEVICE_CTRL_BASE(PWM) + 11)