Skip to content

R
rt-thread

Mozi / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 0
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 6e353e68 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #2738 from armink/fix_drivers 

Fix drivers
上级 c45f2f4c 74874fea
隐藏空白更改
内联 并排
Showing with 62 addition and 2257 deletion
bsp/allwinner_tina/drivers/spi/drv_spi_flash.c
浏览文件 @ 6e353e68
...@@ -63,16 +63,6 @@ int rt_hw_spi_flash_with_sfud_init(void) ...@@ -63,16 +63,6 @@ int rt_hw_spi_flash_with_sfud_init(void)
} }
INIT_PREV_EXPORT(rt_hw_spi_flash_with_sfud_init); INIT_PREV_EXPORT(rt_hw_spi_flash_with_sfud_init);
#elif defined(RT_USING_W25QXX)
#include "spi_flash_w25qxx.h"
int rt_hw_spi_flash_init(void)
{
DEBUG_PRINTF("%s -> %d\n", __FUNCTION__, __LINE__);
return w25qxx_init(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME);
}
INIT_DEVICE_EXPORT(rt_hw_spi_flash_init);
#endif #endif
#endif #endif
\ No newline at end of file
bsp/gd32450z-eval/drivers/drv_spi_flash.c
浏览文件 @ 6e353e68
...@@ -20,17 +20,9 @@ ...@@ -20,17 +20,9 @@
#include "spi_flash_sfud.h" #include "spi_flash_sfud.h"
#endif #endif
#ifdef RT_USING_W25QXX
#include "spi_flash_w25qxx.h"
#endif
#include <rthw.h> #include <rthw.h>
#include <finsh.h> #include <finsh.h>
#if defined(RT_USING_SFUD) && defined(RT_USING_W25QXX)
#error "RT_USING_SFUD and RT_USING_W25QXX only need one"
#endif
#define SPI_PERIPH SPI5 #define SPI_PERIPH SPI5
#define SPI_BUS_NAME "spi5" #define SPI_BUS_NAME "spi5"
#define SPI_FLASH_DEVICE_NAME "spi50" #define SPI_FLASH_DEVICE_NAME "spi50"
...@@ -95,11 +87,3 @@ static int rt_hw_spi_flash_with_sfud_init(void) ...@@ -95,11 +87,3 @@ static int rt_hw_spi_flash_with_sfud_init(void)
} }
INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init) INIT_COMPONENT_EXPORT(rt_hw_spi_flash_with_sfud_init)
#endif #endif
#ifdef RT_USING_W25QXX
static int rt_hw_spi_flash_init(void)
{
return w25qxx_init(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME);
}
INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init)
#endif
bsp/nuvoton_m487/.config
浏览文件 @ 6e353e68
...@@ -64,7 +64,8 @@ CONFIG_RT_USING_DEVICE=y ...@@ -64,7 +64,8 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128 CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart0" CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
CONFIG_RT_VER_NUM=0x40001 CONFIG_RT_VER_NUM=0x40002
# CONFIG_RT_USING_CPU_FFS is not set
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
# #
...@@ -137,6 +138,7 @@ CONFIG_RT_USING_DFS_DEVFS=y ...@@ -137,6 +138,7 @@ CONFIG_RT_USING_DFS_DEVFS=y
# #
CONFIG_RT_USING_DEVICE_IPC=y CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=64 CONFIG_RT_PIPE_BUFSZ=64
# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
CONFIG_RT_USING_SERIAL=y CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64 CONFIG_RT_SERIAL_RB_BUFSZ=64
...@@ -156,15 +158,22 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64 ...@@ -156,15 +158,22 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
CONFIG_RT_USING_SPI=y CONFIG_RT_USING_SPI=y
# CONFIG_RT_USING_QSPI is not set # CONFIG_RT_USING_QSPI is not set
# CONFIG_RT_USING_SPI_MSD is not set # CONFIG_RT_USING_SPI_MSD is not set
# CONFIG_RT_USING_SFUD is not set CONFIG_RT_USING_SFUD=y
CONFIG_RT_USING_W25QXX=y CONFIG_RT_SFUD_USING_SFDP=y
# CONFIG_RT_USING_GD is not set CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
# CONFIG_RT_SFUD_USING_QSPI is not set
# CONFIG_RT_DEBUG_SFUD is not set
# CONFIG_RT_USING_ENC28J60 is not set # CONFIG_RT_USING_ENC28J60 is not set
# CONFIG_RT_USING_SPI_WIFI is not set # CONFIG_RT_USING_SPI_WIFI is not set
# CONFIG_RT_USING_WDT is not set # CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set # CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set # CONFIG_RT_USING_SENSOR is not set
#
# Using Hardware Crypto drivers
#
# CONFIG_RT_USING_HWCRYPTO is not set
# #
# Using WiFi # Using WiFi
# #
...@@ -196,6 +205,12 @@ CONFIG_RT_USING_POSIX=y ...@@ -196,6 +205,12 @@ CONFIG_RT_USING_POSIX=y
# #
# CONFIG_RT_USING_SAL is not set # CONFIG_RT_USING_SAL is not set
#
# Network interface device
#
# CONFIG_RT_USING_NETDEV is not set
CONFIG_NETDEV_USING_PING=y
# #
# light weight TCP/IP stack # light weight TCP/IP stack
# #
...@@ -240,6 +255,7 @@ CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=768 ...@@ -240,6 +255,7 @@ CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=768
CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8 CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set # CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
CONFIG_LWIP_NETIF_STATUS_CALLBACK=1 CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
CONFIG_LWIP_NETIF_LINK_CALLBACK=1
CONFIG_SO_REUSE=1 CONFIG_SO_REUSE=1
CONFIG_LWIP_SO_RCVTIMEO=1 CONFIG_LWIP_SO_RCVTIMEO=1
CONFIG_LWIP_SO_SNDTIMEO=1 CONFIG_LWIP_SO_SNDTIMEO=1
...@@ -248,6 +264,7 @@ CONFIG_LWIP_SO_RCVBUF=1 ...@@ -248,6 +264,7 @@ CONFIG_LWIP_SO_RCVBUF=1
CONFIG_LWIP_NETIF_LOOPBACK=0 CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_STATS is not set # CONFIG_RT_LWIP_STATS is not set
# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set # CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
CONFIG_RT_LWIP_USING_PING=y
# CONFIG_RT_LWIP_DEBUG is not set # CONFIG_RT_LWIP_DEBUG is not set
# #
...@@ -269,7 +286,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -269,7 +286,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# #
# Utilities # Utilities
# #
# CONFIG_RT_USING_LOGTRACE is not set
# CONFIG_RT_USING_RYM is not set # CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set # CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set # CONFIG_RT_USING_UTEST is not set
...@@ -311,6 +327,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -311,6 +327,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_NOPOLL is not set # CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set # CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set # CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_ATSRV_SOCKET is not set
# CONFIG_PKG_USING_WIZNET is not set # CONFIG_PKG_USING_WIZNET is not set
# #
...@@ -323,6 +340,9 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -323,6 +340,9 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set # CONFIG_PKG_USING_TENCENT_IOTKIT is not set
# CONFIG_PKG_USING_NIMBLE is not set # CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
# CONFIG_PKG_USING_IPMSG is not set
# CONFIG_PKG_USING_LSSDP is not set
# CONFIG_PKG_USING_AIRKISS_OPEN is not set
# #
# security packages # security packages
...@@ -343,6 +363,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -343,6 +363,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# #
# CONFIG_PKG_USING_OPENMV is not set # CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set # CONFIG_PKG_USING_MUPDF is not set
# CONFIG_PKG_USING_STEMWIN is not set
# #
# tools packages # tools packages
...@@ -371,35 +392,32 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -371,35 +392,32 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_CMSIS is not set # CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set # CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set # CONFIG_PKG_USING_LITTLEFS is not set
# CONFIG_PKG_USING_THREAD_POOL is not set
# #
# peripheral libraries and drivers # peripheral libraries and drivers
# #
# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
#
# sensors drivers
#
# CONFIG_PKG_USING_LSM6DSL is not set
# CONFIG_PKG_USING_LPS22HB is not set
# CONFIG_PKG_USING_HTS221 is not set
# CONFIG_PKG_USING_LSM303AGR is not set
# CONFIG_PKG_USING_BME280 is not set
# CONFIG_PKG_USING_BMA400 is not set
# CONFIG_PKG_USING_BMI160_BMX160 is not set
# CONFIG_PKG_USING_SPL0601 is not set
# CONFIG_PKG_USING_REALTEK_AMEBA is not set # CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set # CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set # CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set # CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set # CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set # CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set # CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set # CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_SX12XX is not set # CONFIG_PKG_USING_SX12XX is not set
# CONFIG_PKG_USING_SIGNAL_LED is not set # CONFIG_PKG_USING_SIGNAL_LED is not set
# CONFIG_PKG_USING_LEDBLINK is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set # CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_AT24CXX is not set
# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
# CONFIG_PKG_USING_AD7746 is not set
# CONFIG_PKG_USING_PCA9685 is not set
# CONFIG_PKG_USING_I2C_TOOLS is not set
# #
# miscellaneous packages # miscellaneous packages
...@@ -415,6 +433,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -415,6 +433,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_DSTR is not set # CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set # CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
# CONFIG_PKG_USING_DIGITALCTRL is not set
# #
# samples: kernel and components samples # samples: kernel and components samples
...@@ -425,3 +444,4 @@ CONFIG_LWIP_NETIF_LOOPBACK=0 ...@@ -425,3 +444,4 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set # CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set # CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_NNOM is not set
bsp/nuvoton_m487/driver/drv_spiflash.c
浏览文件 @ 6e353e68
...@@ -11,11 +11,9 @@ ...@@ -11,11 +11,9 @@
#include <rtdevice.h> #include <rtdevice.h>
#ifdef RT_USING_SPI #ifdef RT_USING_SPI
#if defined(RT_USING_W25QXX) || defined(RT_USING_SFUD)
#if defined(RT_USING_SFUD)
static struct rt_spi_device spi_device; static struct rt_spi_device spi_device;
#ifdef RT_USING_W25QXX
#include "spi_flash_w25qxx.h"
#elif defined(RT_USING_SFUD)
#include "spi_flash.h" #include "spi_flash.h"
#include "spi_flash_sfud.h" #include "spi_flash_sfud.h"
#endif #endif
...@@ -25,11 +23,7 @@ static int rt_hw_spi_flash_init(void) ...@@ -25,11 +23,7 @@ static int rt_hw_spi_flash_init(void)
{ {
rt_spi_bus_attach_device(&spi_device, "qspi01", "qspi0", RT_NULL); rt_spi_bus_attach_device(&spi_device, "qspi01", "qspi0", RT_NULL);
#ifdef RT_USING_W25QXX #if defined(RT_USING_SFUD)
return w25qxx_init("flash0", "qspi01");
#elif defined(RT_USING_SFUD)
if (rt_sfud_flash_probe("flash0", "qspi01") == RT_NULL) if (rt_sfud_flash_probe("flash0", "qspi01") == RT_NULL)
{ {
...@@ -40,6 +34,6 @@ static int rt_hw_spi_flash_init(void) ...@@ -40,6 +34,6 @@ static int rt_hw_spi_flash_init(void)
} }
INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init); INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
#endif
#endif #endif /* RT_USING_SPI */
bsp/nuvoton_m487/rtconfig.h
浏览文件 @ 6e353e68
...@@ -37,7 +37,7 @@ ...@@ -37,7 +37,7 @@
#define RT_USING_CONSOLE #define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart0" #define RT_CONSOLE_DEVICE_NAME "uart0"
#define RT_VER_NUM 0x40001 #define RT_VER_NUM 0x40002
/* RT-Thread Components */ /* RT-Thread Components */
...@@ -93,7 +93,12 @@ ...@@ -93,7 +93,12 @@
#define RT_SERIAL_USING_DMA #define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64 #define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_SPI #define RT_USING_SPI
#define RT_USING_W25QXX #define RT_USING_SFUD
#define RT_SFUD_USING_SFDP
#define RT_SFUD_USING_FLASH_INFO_TABLE
/* Using Hardware Crypto drivers */
/* Using WiFi */ /* Using WiFi */
...@@ -111,6 +116,10 @@ ...@@ -111,6 +116,10 @@
/* Socket abstraction layer */ /* Socket abstraction layer */
/* Network interface device */
#define NETDEV_USING_PING
/* light weight TCP/IP stack */ /* light weight TCP/IP stack */
#define RT_USING_LWIP #define RT_USING_LWIP
...@@ -145,11 +154,13 @@ ...@@ -145,11 +154,13 @@
#define RT_LWIP_ETHTHREAD_STACKSIZE 768 #define RT_LWIP_ETHTHREAD_STACKSIZE 768
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8 #define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
#define LWIP_NETIF_STATUS_CALLBACK 1 #define LWIP_NETIF_STATUS_CALLBACK 1
#define LWIP_NETIF_LINK_CALLBACK 1
#define SO_REUSE 1 #define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1 #define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1 #define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1 #define LWIP_SO_RCVBUF 1
#define LWIP_NETIF_LOOPBACK 0 #define LWIP_NETIF_LOOPBACK 0
#define RT_LWIP_USING_PING
/* Modbus master and slave stack */ /* Modbus master and slave stack */
...@@ -196,8 +207,6 @@ ...@@ -196,8 +207,6 @@
/* peripheral libraries and drivers */ /* peripheral libraries and drivers */
/* sensors drivers */
/* miscellaneous packages */ /* miscellaneous packages */
......
components/drivers/Kconfig
浏览文件 @ 6e353e68
...@@ -212,6 +212,9 @@ config RT_USING_SPI ...@@ -212,6 +212,9 @@ config RT_USING_SPI
config RT_USING_SFUD config RT_USING_SFUD
bool "Using Serial Flash Universal Driver" bool "Using Serial Flash Universal Driver"
default n default n
help
An using JEDEC's SFDP standard serial (SPI) flash universal driver library
if RT_USING_SFUD if RT_USING_SFUD
config RT_SFUD_USING_SFDP config RT_SFUD_USING_SFDP
bool "Using auto probe flash JEDEC SFDP parameter" bool "Using auto probe flash JEDEC SFDP parameter"
...@@ -231,14 +234,6 @@ config RT_USING_SPI ...@@ -231,14 +234,6 @@ config RT_USING_SPI
default n default n
endif endif
config RT_USING_W25QXX
bool "Using W25QXX SPI NorFlash"
default n
config RT_USING_GD
bool "Using GD SPI NorFlash"
default n
config RT_USING_ENC28J60 config RT_USING_ENC28J60
bool "Using ENC28J60 SPI Ethernet network interface" bool "Using ENC28J60 SPI Ethernet network interface"
select RT_USING_LWIP select RT_USING_LWIP
......
components/drivers/i2c/fm24clxx.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-07-14 aubr.cool 1st version
*/
#include <rtthread.h>
#include <rtdevice.h>
#include "fm24clxx.h"
struct fm24clxx_device
{
struct rt_device parent;
struct rt_i2c_bus_device *bus;
};
/* RT-Thread device interface */
static rt_err_t fm24clxx_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t fm24clxx_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t fm24clxx_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t fm24clxx_control(rt_device_t dev, int cmd, void *args)
{
return RT_EOK;
}
static rt_size_t fm24clxx_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
struct fm24clxx_device *fm24clxx;
const struct fm24clxx_config *cfg;
struct rt_i2c_msg msg[2];
rt_uint8_t mem_addr[2] = {0,};
rt_size_t ret = 0;
RT_ASSERT(dev != 0);
fm24clxx = (struct fm24clxx_device *) dev;
RT_ASSERT(fm24clxx->parent.user_data != 0);
cfg = (const struct fm24clxx_config *) fm24clxx->parent.user_data;
if(pos > cfg->size)
{
return 0;
}
if(pos + size > cfg->size)
{
size = cfg->size - pos;
}
msg[0].addr = cfg->addr;
msg[0].flags = cfg->flags | RT_I2C_WR;
mem_addr[0] = (pos >> 8);
mem_addr[1] = (rt_uint8_t) pos;
msg[0].buf = (rt_uint8_t *) mem_addr;
msg[0].len = 2;
msg[1].addr = cfg->addr;
msg[1].flags = cfg->flags | RT_I2C_RD;
msg[1].buf = (rt_uint8_t *) buffer;
msg[1].len = size;
ret = rt_i2c_transfer(fm24clxx->bus, msg, 2);
return (ret == 2) ? size : 0;
}
static rt_size_t fm24clxx_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
struct fm24clxx_device *fm24clxx;
const struct fm24clxx_config *cfg;
struct rt_i2c_msg msg[2];
rt_uint8_t mem_addr[2] = {0,};
rt_size_t ret = 0;
RT_ASSERT(dev != 0);
fm24clxx = (struct fm24clxx_device *) dev;
RT_ASSERT(fm24clxx->parent.user_data != 0);
cfg = (const struct fm24clxx_config *) fm24clxx->parent.user_data;
if(pos > cfg->size)
{
return 0;
}
if(pos + size > cfg->size)
{
size = cfg->size - pos;
}
msg[0].addr = cfg->addr;
msg[0].flags = cfg->flags | RT_I2C_WR;
mem_addr[0] = (pos >> 8);
mem_addr[1] = (rt_uint8_t) pos;
msg[0].buf = (rt_uint8_t *) mem_addr;
msg[0].len = 2;
msg[1].addr = cfg->addr;
msg[1].flags = cfg->flags | RT_I2C_WR | RT_I2C_NO_START;
msg[1].buf = (rt_uint8_t *) buffer;
msg[1].len = size;
ret = rt_i2c_transfer(fm24clxx->bus, msg, 2);
return (ret == 2) ? size : 0;
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device fm24clxx_ops =
{
fm24clxx_init,
fm24clxx_open,
fm24clxx_close,
fm24clxx_read,
fm24clxx_write,
fm24clxx_control
};
#endif
rt_err_t fm24clxx_register(const char *fm_device_name, const char *i2c_bus, void *user_data)
{
static struct fm24clxx_device fm24clxx_drv;
struct rt_i2c_bus_device *bus;
bus = rt_i2c_bus_device_find(i2c_bus);
if (bus == RT_NULL)
{
return RT_ENOSYS;
}
fm24clxx_drv.bus = bus;
fm24clxx_drv.parent.type = RT_Device_Class_Block;
#ifdef RT_USING_DEVICE_OPS
fm24clxx_drv.parent.ops = &fm24clxx_ops;
#else
fm24clxx_drv.parent.init = fm24clxx_init;
fm24clxx_drv.parent.open = fm24clxx_open;
fm24clxx_drv.parent.close = fm24clxx_close;
fm24clxx_drv.parent.read = fm24clxx_read;
fm24clxx_drv.parent.write = fm24clxx_write;
fm24clxx_drv.parent.control = fm24clxx_control;
#endif
fm24clxx_drv.parent.user_data = user_data;
return rt_device_register(&fm24clxx_drv.parent, fm_device_name, RT_DEVICE_FLAG_RDWR);
}
\ No newline at end of file
components/drivers/i2c/fm24clxx.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2017-07-14 aubr.cool 1st version
*/
#ifndef __FM24CLXX_H__
#define __FM24CLXX_H__
#include <rtthread.h>
struct fm24clxx_config
{
rt_uint32_t size;
rt_uint16_t addr;
rt_uint16_t flags;
};
extern rt_err_t fm24clxx_register(const char *e2m_device_name,
const char *i2c_bus, void *user_data);
#endif /*__FM24CLXX_H__*/
\ No newline at end of file
components/drivers/spi/SConscript
浏览文件 @ 6e353e68
...@@ -14,24 +14,9 @@ src_device = [] ...@@ -14,24 +14,9 @@ src_device = []
if GetDepend('RT_USING_SPI_WIFI'): if GetDepend('RT_USING_SPI_WIFI'):
src_device += ['spi_wifi_rw009.c'] src_device += ['spi_wifi_rw009.c']
if GetDepend('RT_USING_W25QXX'):
src_device += ['spi_flash_w25qxx.c']
if GetDepend('RT_USING_W25QXX_MTD'):
src_device += ['spi_flash_w25qxx_mtd.c']
if GetDepend('RT_USING_ENC28J60'): if GetDepend('RT_USING_ENC28J60'):
src_device += ['enc28j60.c'] src_device += ['enc28j60.c']
if GetDepend('RT_USING_AT45DBXX'):
src_device += ['spi_flash_at45dbxx.c']
if GetDepend('RT_USING_SST25VFXX'):
src_device += ['spi_flash_sst25vfxx.c']
if GetDepend('RT_USING_GD'):
src_device += ['spi_flash_gd.c']
if GetDepend('RT_USING_SPI_MSD'): if GetDepend('RT_USING_SPI_MSD'):
src_device += ['spi_msd.c'] src_device += ['spi_msd.c']
......
components/drivers/spi/device_driver_list.txt
浏览文件 @ 6e353e68
...@@ -5,11 +5,5 @@ http://www.rt-thread.com/ ...@@ -5,11 +5,5 @@ http://www.rt-thread.com/
enc28j60.c/enc28j60.h enc28j60.c/enc28j60.h
http://www.microchip.com/ http://www.microchip.com/
spi_flash_at45dbxx.c/spi_flash_at45dbxx.h spi_flash_sfud: Serial Flash Universal Driver
http://www.atmel.com/ https://github.com/armink/SFUD
\ No newline at end of file
spi_flash_sst25vfxx.c/spi_flash_sst25vfxx.h
http://www.microchip.com/
spi_flash_w25qxx.c/spi_flash_w25qxx.h
http://www.winbond.com/
components/drivers/spi/spi_flash_at45dbxx.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
*/
#include <stdint.h>
#include "spi_flash_at45dbxx.h"
#define FLASH_DEBUG
#define DMA_BUFFER_SIZE 512
#ifdef FLASH_DEBUG
#define FLASH_TRACE rt_kprintf
#else
#define FLASH_TRACE(...)
#endif /**< #ifdef FLASH_DEBUG */
/* JEDEC Manufacturer’s ID */
#define MF_ID (0x1F) /* atmel */
#define DENSITY_CODE_011D (0x02) /* AT45DB011D Density Code : 00010 = 1-Mbit */
#define DENSITY_CODE_021D (0x03) /* AT45DB021D Density Code : 00011 = 2-Mbit */
#define DENSITY_CODE_041D (0x04) /* AT45DB041D Density Code : 00100 = 4-Mbit */
#define DENSITY_CODE_081D (0x05) /* AT45DB081D Density Code : 00101 = 8-Mbit */
#define DENSITY_CODE_161D (0x06) /* AT45DB161D Density Code : 00110 = 16-Mbit */
#define DENSITY_CODE_321D (0x07) /* AT45DB321D Density Code : 00111 = 32-Mbit */
#define DENSITY_CODE_642D (0x08) /* AT45DB642D Density Code : 01000 = 64-Mbit */
struct JEDEC_ID
{
uint8_t manufacturer_id; /* Manufacturer ID */
uint8_t density_code:5; /* Density Code */
uint8_t family_code:3; /* Family Code */
uint8_t version_code:5; /* Product Version Code */
uint8_t mlc_code:3; /* MLC Code */
uint8_t byte_count; /* Byte Count */
};
#define AT45DB_BUFFER_1_WRITE 0x84
#define AT45DB_BUFFER_2_WRITE 0x87
#define AT45DB_BUFFER_1_READ 0xD4
#define AT45DB_BUFFER_2_READ 0xD6
#define AT45DB_B1_TO_MM_PAGE_PROG_WITH_ERASE 0x83
#define AT45DB_B2_TO_MM_PAGE_PROG_WITH_ERASE 0x86
#define AT45DB_MM_PAGE_TO_B1_XFER 0x53
#define AT45DB_MM_PAGE_TO_B2_XFER 0x55
#define AT45DB_PAGE_ERASE 0x81
#define AT45DB_SECTOR_ERASE 0x7C
#define AT45DB_READ_STATE_REGISTER 0xD7
#define AT45DB_MM_PAGE_READ 0xD2
#define AT45DB_MM_PAGE_PROG_THRU_BUFFER1 0x82
#define AT45DB_CMD_JEDEC_ID 0x9F
static struct spi_flash_at45dbxx spi_flash_at45dbxx;
/*****************************************************************************/
/*Status Register Format: */
/* ------------------------------------------------------------------------- */
/* | bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 | */
/* |--------|--------|--------|--------|--------|--------|--------|--------| */
/* |RDY/BUSY| COMP | device density | X | X | */
/* ------------------------------------------------------------------------- */
/* 0:busy | | AT45DB041:0111 | protect|page size */
/* 1:ready | | AT45DB161:1011 | */
/* --------------------------------------------------------------------------*/
/*****************************************************************************/
static uint8_t AT45DB_StatusRegisterRead(void)
{
return rt_spi_sendrecv8(spi_flash_at45dbxx.rt_spi_device, AT45DB_READ_STATE_REGISTER);
}
static void wait_busy(void)
{
uint16_t i = 0;
while (i++ < 10000)
{
if (AT45DB_StatusRegisterRead() & 0x80)
{
return;
}
}
FLASH_TRACE("\r\nSPI_FLASH timeout!!!\r\n");
}
/* RT-Thread Device Driver Interface */
static rt_err_t AT45DB_flash_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t AT45DB_flash_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
static rt_err_t AT45DB_flash_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t AT45DB_flash_control(rt_device_t dev, int cmd, void *args)
{
RT_ASSERT(dev != RT_NULL);
if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
{
struct rt_device_blk_geometry *geometry;
geometry = (struct rt_device_blk_geometry *)args;
if (geometry == RT_NULL) return -RT_ERROR;
geometry->bytes_per_sector = 512;
geometry->sector_count = 4096;
geometry->block_size = 4096; /* block erase: 4k */
}
return RT_EOK;
}
static rt_size_t AT45DB_flash_read_page_256(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
uint32_t index, nr;
uint8_t * read_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[8];
uint32_t i;
for(i=0; i<sizeof(send_buffer); i++)
{
send_buffer[i] = 0;
}
send_buffer[0] = AT45DB_MM_PAGE_READ;
send_buffer[1] = (uint8_t)(page >> 7);
send_buffer[2] = (uint8_t)(page << 1);
rt_spi_send_then_recv(spi_flash_at45dbxx.rt_spi_device, send_buffer, 8, read_buffer, 256);
read_buffer += 256;
page++;
}
return size;
}
static rt_size_t AT45DB_flash_read_page_512(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
uint32_t index, nr;
uint8_t * read_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[8];
uint32_t i;
for(i=0; i<sizeof(send_buffer); i++)
{
send_buffer[i] = 0;
}
send_buffer[0] = AT45DB_MM_PAGE_READ;
send_buffer[1] = (uint8_t)(page >> 6);
send_buffer[2] = (uint8_t)(page << 2);
rt_spi_send_then_recv(spi_flash_at45dbxx.rt_spi_device, send_buffer, 8, read_buffer, 512);
read_buffer += 512;
page++;
}
return size;
}
static rt_size_t AT45DB_flash_read_page_1024(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
uint32_t index, nr;
uint8_t * read_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[8];
uint32_t i;
for(i=0; i<sizeof(send_buffer); i++)
{
send_buffer[i] = 0;
}
send_buffer[0] = AT45DB_MM_PAGE_READ;
send_buffer[1] = (uint8_t)(page >> 5);
send_buffer[2] = (uint8_t)(page << 3);
rt_spi_send_then_recv(spi_flash_at45dbxx.rt_spi_device, send_buffer, 8, read_buffer, 1024);
read_buffer += 1024;
page++;
}
return size;
}
static rt_size_t AT45DB_flash_write_page_256(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint32_t index, nr;
const uint8_t * write_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[4];
send_buffer[0] = AT45DB_MM_PAGE_PROG_THRU_BUFFER1;
send_buffer[1] = (uint8_t) (page >> 7);
send_buffer[2] = (uint8_t) (page << 1);
send_buffer[3] = 0;
rt_spi_send_then_send(spi_flash_at45dbxx.rt_spi_device, send_buffer, 4, write_buffer, 256);
write_buffer += 256;
page++;
wait_busy();
}
return size;
}
static rt_size_t AT45DB_flash_write_page_512(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint32_t index, nr;
const uint8_t * write_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[4];
send_buffer[0] = AT45DB_MM_PAGE_PROG_THRU_BUFFER1;
send_buffer[1] = (uint8_t) (page >> 6);
send_buffer[2] = (uint8_t) (page << 2);
send_buffer[3] = 0;
rt_spi_send_then_send(spi_flash_at45dbxx.rt_spi_device, send_buffer, 4, write_buffer, 512);
write_buffer += 512;
page++;
wait_busy();
}
return size;
}
static rt_size_t AT45DB_flash_write_page_1024(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint32_t index, nr;
const uint8_t * write_buffer = buffer;
uint32_t page = pos;
nr = size;
for (index = 0; index < nr; index++)
{
uint8_t send_buffer[4];
send_buffer[0] = AT45DB_MM_PAGE_PROG_THRU_BUFFER1;
send_buffer[1] = (uint8_t) (page >> 5);
send_buffer[2] = (uint8_t) (page << 3);
send_buffer[3] = 0;
rt_spi_send_then_send(spi_flash_at45dbxx.rt_spi_device, send_buffer, 4, write_buffer, 1024);
write_buffer += 1024;
page++;
wait_busy();
}
return size;
}
rt_err_t at45dbxx_init(const char * flash_device_name, const char * spi_device_name)
{
struct rt_spi_device * rt_spi_device;
struct JEDEC_ID * JEDEC_ID;
rt_spi_device = (struct rt_spi_device *)rt_device_find(spi_device_name);
if(rt_spi_device == RT_NULL)
{
FLASH_TRACE("spi device %s not found!\r\n", spi_device_name);
return -RT_ENOSYS;
}
spi_flash_at45dbxx.rt_spi_device = rt_spi_device;
/* config spi */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible Modes 0 and 3 */
cfg.max_hz = 66000000; /* Atmel RapidS Serial Interface: 66MHz Maximum Clock Frequency */
rt_spi_configure(spi_flash_at45dbxx.rt_spi_device, &cfg);
}
/* read JEDEC ID */
{
uint8_t cmd;
uint8_t id_recv[6];
JEDEC_ID = (struct JEDEC_ID *)id_recv;
cmd = AT45DB_CMD_JEDEC_ID;
rt_spi_send_then_recv(spi_flash_at45dbxx.rt_spi_device, &cmd, 1, id_recv, 6);
/**< 1FH = Atmel */
/**< 001 = Atmel DataFlash */
if(JEDEC_ID->manufacturer_id != 0x1F || JEDEC_ID->family_code != 0x01)
{
FLASH_TRACE("Manufacturer’s ID or Memory Type error!\r\n");
FLASH_TRACE("JEDEC Read-ID Data : %02X %02X %02X\r\n", id_recv[0], id_recv[1], id_recv[2]);
return -RT_ENOSYS;
}
if(JEDEC_ID->density_code == DENSITY_CODE_011D)
{
/**< AT45DB011D Density Code : 00010 = 1-Mbit */
FLASH_TRACE("AT45DB011D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 256; /* Page Erase (256 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 512; /* 1-Mbit / 8 / 256 = 512 */
spi_flash_at45dbxx.geometry.block_size = 1024*2; /* Block Erase (2-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_021D)
{
/**< AT45DB021D Density Code : 00011 = 2-Mbit */
FLASH_TRACE("AT45DB021D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 256; /* Page Erase (256 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 512*2; /* 2-Mbit / 8 / 256 = 1024 */
spi_flash_at45dbxx.geometry.block_size = 1024*2; /* Block Erase (2-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_041D)
{
/**< AT45DB041D Density Code : 00100 = 4-Mbit */
FLASH_TRACE("AT45DB041D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 256; /* Page Erase (256 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 512*4; /* 4-Mbit / 8 / 256 = 2048 */
spi_flash_at45dbxx.geometry.block_size = 1024*2; /* Block Erase (2-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_081D)
{
/**< AT45DB081D Density Code : 00101 = 8-Mbit */
FLASH_TRACE("AT45DB081D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 256; /* Page Erase (256 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 512*8; /* 8-Mbit / 8 / 256 = 4096 */
spi_flash_at45dbxx.geometry.block_size = 1024*2; /* Block Erase (2-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_161D)
{
/**< AT45DB161D Density Code : 00110 = 16-Mbit */
FLASH_TRACE("AT45DB161D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 512; /* Page Erase (512 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 256*16; /* 16-Mbit / 8 / 512 = 4096 */
spi_flash_at45dbxx.geometry.block_size = 1024*4; /* Block Erase (4-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_321D)
{
/**< AT45DB321D Density Code : 00111 = 32-Mbit */
FLASH_TRACE("AT45DB321D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 512; /* Page Erase (512 Bytes) */
spi_flash_at45dbxx.geometry.sector_count = 256*32; /* 32-Mbit / 8 / 512 = 8192 */
spi_flash_at45dbxx.geometry.block_size = 1024*4; /* Block Erase (4-Kbytes) */
}
else if(JEDEC_ID->density_code == DENSITY_CODE_642D)
{
/**< AT45DB642D Density Code : 01000 = 64-Mbit */
FLASH_TRACE("AT45DB642D detection\r\n");
spi_flash_at45dbxx.geometry.bytes_per_sector = 1024; /* Page Erase (1 Kbyte) */
spi_flash_at45dbxx.geometry.sector_count = 128*64; /* 64-Mbit / 8 / 1024 = 8192 */
spi_flash_at45dbxx.geometry.block_size = 1024*8; /* Block Erase (8 Kbytes) */
}
else
{
FLASH_TRACE("Memory Capacity error!\r\n");
return -RT_ENOSYS;
}
}
/* register device */
spi_flash_at45dbxx.flash_device.type = RT_Device_Class_Block;
spi_flash_at45dbxx.flash_device.init = AT45DB_flash_init;
spi_flash_at45dbxx.flash_device.open = AT45DB_flash_open;
spi_flash_at45dbxx.flash_device.close = AT45DB_flash_close;
spi_flash_at45dbxx.flash_device.control = AT45DB_flash_control;
if(JEDEC_ID->density_code == DENSITY_CODE_642D)
{
spi_flash_at45dbxx.flash_device.read = AT45DB_flash_read_page_1024;
spi_flash_at45dbxx.flash_device.write = AT45DB_flash_write_page_1024;
}
else if(JEDEC_ID->density_code == DENSITY_CODE_161D
|| JEDEC_ID->density_code == DENSITY_CODE_321D )
{
spi_flash_at45dbxx.flash_device.read = AT45DB_flash_read_page_512;
spi_flash_at45dbxx.flash_device.write = AT45DB_flash_write_page_512;
}
else
{
spi_flash_at45dbxx.flash_device.read = AT45DB_flash_read_page_256;
spi_flash_at45dbxx.flash_device.write = AT45DB_flash_write_page_256;
}
/* no private */
spi_flash_at45dbxx.flash_device.user_data = RT_NULL;
rt_device_register(&spi_flash_at45dbxx.flash_device, flash_device_name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STANDALONE);
return RT_EOK;
}
components/drivers/spi/spi_flash_at45dbxx.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
*/
#ifndef SPI_FLASH_AT45DBXX_H_INCLUDED
#define SPI_FLASH_AT45DBXX_H_INCLUDED
#include <rtthread.h>
#include <drivers/spi.h>
struct spi_flash_at45dbxx
{
struct rt_device flash_device;
struct rt_device_blk_geometry geometry;
struct rt_spi_device * rt_spi_device;
};
extern rt_err_t at45dbxx_init(const char * flash_device_name, const char * spi_device_name);
#endif // SPI_FLASH_AT45DBXX_H_INCLUDED
components/drivers/spi/spi_flash_gd.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2015-10-11 fullhan copy from winbond flash
*/
#include <stdint.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "spi_flash.h"
#include "spi_flash_gd.h"
#define FLASH_DEBUG
#ifdef FLASH_DEBUG
#define FLASH_TRACE rt_kprintf
#else
#define FLASH_TRACE(...)
#endif /* #ifdef FLASH_DEBUG */
#define PAGE_SIZE 4096
/* JEDEC Manufacturer's ID */
#define MF_ID (0xC8)
/* JEDEC Device ID: Memory type and Capacity */
#define MTC_GD25Q128 (0x4018)
/* command list */
#define CMD_WRSR (0x01) /* Write Status Register */
#define CMD_PP (0x02) /* Page Program */
#define CMD_READ (0x03) /* Read Data */
#define CMD_WRDI (0x04) /* Write Disable */
#define CMD_RDSR1 (0x05) /* Read Status Register-1 */
#define CMD_WREN (0x06) /* Write Enable */
#define CMD_FAST_READ (0x0B) /* Fast Read */
#define CMD_ERASE_4K (0x20) /* Sector Erase:4K */
#define CMD_RDSR2 (0x35) /* Read Status Register-2 */
#define CMD_ERASE_32K (0x52) /* 32KB Block Erase */
#define CMD_JEDEC_ID (0x9F) /* Read JEDEC ID */
#define CMD_ERASE_full (0xC7) /* Chip Erase */
#define CMD_ERASE_64K (0xD8) /* 64KB Block Erase */
#define DUMMY (0xFF)
static struct spi_flash_device spi_flash_device;
static void flash_lock(struct spi_flash_device * flash_device)
{
rt_mutex_take(&flash_device->lock, RT_WAITING_FOREVER);
}
static void flash_unlock(struct spi_flash_device * flash_device)
{
rt_mutex_release(&flash_device->lock);
}
static uint8_t w25qxx_read_status(void)
{
return rt_spi_sendrecv8(spi_flash_device.rt_spi_device, CMD_RDSR1);
}
static void w25qxx_wait_busy(void)
{
while( w25qxx_read_status() & (0x01));
}
/** \brief read [size] byte from [offset] to [buffer]
*
* \param offset uint32_t unit : byte
* \param buffer uint8_t*
* \param size uint32_t unit : byte
* \return uint32_t byte for read
*
*/
static uint32_t w25qxx_read(uint32_t offset, uint8_t * buffer, uint32_t size)
{
uint8_t send_buffer[4];
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_READ;
send_buffer[1] = (uint8_t)(offset>>16);
send_buffer[2] = (uint8_t)(offset>>8);
send_buffer[3] = (uint8_t)(offset);
rt_spi_send_then_recv(spi_flash_device.rt_spi_device,
send_buffer, 4,
buffer, size);
return size;
}
/** \brief write N page on [page]
*
* \param page_addr uint32_t unit : byte (4096 * N,1 page = 4096byte)
* \param buffer const uint8_t*
* \return uint32_t
*
*/
static uint32_t w25qxx_page_write(uint32_t page_addr, const uint8_t* buffer)
{
uint32_t index;
uint8_t send_buffer[4];
RT_ASSERT((page_addr&0xFF) == 0); /* page addr must align to 256byte. */
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_ERASE_4K;
send_buffer[1] = (page_addr >> 16);
send_buffer[2] = (page_addr >> 8);
send_buffer[3] = (page_addr);
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 4);
w25qxx_wait_busy(); // wait erase done.
for(index=0; index < (PAGE_SIZE / 256); index++)
{
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_PP;
send_buffer[1] = (uint8_t)(page_addr >> 16);
send_buffer[2] = (uint8_t)(page_addr >> 8);
send_buffer[3] = (uint8_t)(page_addr);
rt_spi_send_then_send(spi_flash_device.rt_spi_device,
send_buffer,
4,
buffer,
256);
buffer += 256;
page_addr += 256;
w25qxx_wait_busy();
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
return PAGE_SIZE;
}
/* RT-Thread device interface */
static rt_err_t w25qxx_flash_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t w25qxx_flash_open(rt_device_t dev, rt_uint16_t oflag)
{
uint8_t send_buffer[3];
flash_lock((struct spi_flash_device *)dev);
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_WRSR;
send_buffer[1] = 0;
send_buffer[2] = 0;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 3);
w25qxx_wait_busy();
flash_unlock((struct spi_flash_device *)dev);
return RT_EOK;
}
static rt_err_t w25qxx_flash_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t w25qxx_flash_control(rt_device_t dev, int cmd, void *args)
{
RT_ASSERT(dev != RT_NULL);
if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
{
struct rt_device_blk_geometry *geometry;
geometry = (struct rt_device_blk_geometry *)args;
if (geometry == RT_NULL) return -RT_ERROR;
geometry->bytes_per_sector = spi_flash_device.geometry.bytes_per_sector;
geometry->sector_count = spi_flash_device.geometry.sector_count;
geometry->block_size = spi_flash_device.geometry.block_size;
}
return RT_EOK;
}
static rt_size_t w25qxx_flash_read(rt_device_t dev,
rt_off_t pos,
void* buffer,
rt_size_t size)
{
flash_lock((struct spi_flash_device *)dev);
w25qxx_read(pos*spi_flash_device.geometry.bytes_per_sector,
buffer,
size*spi_flash_device.geometry.bytes_per_sector);
flash_unlock((struct spi_flash_device *)dev);
return size;
}
static rt_size_t w25qxx_flash_write(rt_device_t dev,
rt_off_t pos,
const void* buffer,
rt_size_t size)
{
rt_size_t i = 0;
rt_size_t block = size;
const uint8_t * ptr = buffer;
flash_lock((struct spi_flash_device *)dev);
while(block--)
{
w25qxx_page_write((pos + i)*spi_flash_device.geometry.bytes_per_sector,
ptr);
ptr += PAGE_SIZE;
i++;
}
flash_unlock((struct spi_flash_device *)dev);
return size;
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops gd_device_ops =
{
w25qxx_flash_init,
w25qxx_flash_open,
w25qxx_flash_close,
w25qxx_flash_read,
w25qxx_flash_write,
w25qxx_flash_control
};
#endif
rt_err_t gd_init(const char * flash_device_name, const char * spi_device_name)
{
struct rt_spi_device * rt_spi_device;
/* initialize mutex */
if (rt_mutex_init(&spi_flash_device.lock, spi_device_name, RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("init sd lock mutex failed\n");
return -RT_ENOSYS;
}
rt_spi_device = (struct rt_spi_device *)rt_device_find(spi_device_name);
if(rt_spi_device == RT_NULL)
{
FLASH_TRACE("spi device %s not found!\r\n", spi_device_name);
return -RT_ENOSYS;
}
spi_flash_device.rt_spi_device = rt_spi_device;
/* config spi */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible: Mode 0 and Mode 3 */
cfg.max_hz = 50 * 1000 * 1000; /* 50M */
rt_spi_configure(spi_flash_device.rt_spi_device, &cfg);
}
/* init flash */
{
rt_uint8_t cmd;
rt_uint8_t id_recv[3];
uint16_t memory_type_capacity;
flash_lock(&spi_flash_device);
cmd = 0xFF; /* reset SPI FLASH, cancel all cmd in processing. */
rt_spi_send(spi_flash_device.rt_spi_device, &cmd, 1);
cmd = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, &cmd, 1);
/* read flash id */
cmd = CMD_JEDEC_ID;
rt_spi_send_then_recv(spi_flash_device.rt_spi_device, &cmd, 1, id_recv, 3);
flash_unlock(&spi_flash_device);
if(id_recv[0] != MF_ID)
{
FLASH_TRACE("Manufacturers ID error!\r\n");
FLASH_TRACE("JEDEC Read-ID Data : %02X %02X %02X\r\n", id_recv[0], id_recv[1], id_recv[2]);
return -RT_ENOSYS;
}
spi_flash_device.geometry.bytes_per_sector = 4096;
spi_flash_device.geometry.block_size = 4096; /* block erase: 4k */
/* get memory type and capacity */
memory_type_capacity = id_recv[1];
memory_type_capacity = (memory_type_capacity << 8) | id_recv[2];
if(memory_type_capacity == MTC_GD25Q128)
{
FLASH_TRACE("GD128 detection\r\n");
spi_flash_device.geometry.sector_count = 4096;
}
else
{
FLASH_TRACE("Memory Capacity error!\r\n");
return -RT_ENOSYS;
}
}
/* register device */
spi_flash_device.flash_device.type = RT_Device_Class_Block;
#ifdef RT_USING_DEVICE_OPS
spi_flash_device.flash_device.ops = &gd_device_ops;
#else
spi_flash_device.flash_device.init = w25qxx_flash_init;
spi_flash_device.flash_device.open = w25qxx_flash_open;
spi_flash_device.flash_device.close = w25qxx_flash_close;
spi_flash_device.flash_device.read = w25qxx_flash_read;
spi_flash_device.flash_device.write = w25qxx_flash_write;
spi_flash_device.flash_device.control = w25qxx_flash_control;
#endif
/* no private */
spi_flash_device.flash_device.user_data = RT_NULL;
rt_device_register(&spi_flash_device.flash_device, flash_device_name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STANDALONE);
return RT_EOK;
}
components/drivers/spi/spi_flash_gd.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2015-10-11 fullhan copy from winbond flash
*/
#ifndef SPI_FLASH_GD_H_
#define SPI_FLASH_GD_H_
#include <rtthread.h>
extern rt_err_t gd_init(const char * flash_device_name, const char * spi_device_name);
#endif /* SPI_FLASH_GD_H_ */
components/drivers/spi/spi_flash_sst25vfxx.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
*/
#include <stdint.h>
#include "spi_flash_sst25vfxx.h"
#define FLASH_DEBUG
#ifdef FLASH_DEBUG
#define FLASH_TRACE rt_kprintf
#else
#define FLASH_TRACE(...)
#endif /* #ifdef FLASH_DEBUG */
/* JEDEC Manufacturer’s ID */
#define MF_ID (0xBF)
/* JEDEC Device ID : Memory Type */
#define MT_ID (0x25)
/* JEDEC Device ID: Memory Capacity */
#define MC_ID_SST25VF020B (0x8C) /* 2Mbit */
#define MC_ID_SST25VF040B (0x8D) /* 4Mbit */
#define MC_ID_SST25VF080B (0x8E) /* 8Mbit */
#define MC_ID_SST25VF016B (0x41) /* 16Mbit */
#define MC_ID_SST25VF032B (0x4A) /* 32Mbit */
#define MC_ID_SST25VF064C (0x4B) /* 64Mbit */
/* command list */
#define CMD_RDSR (0x05)
#define CMD_WRSR (0x01)
#define CMD_EWSR (0x50)
#define CMD_WRDI (0x04)
#define CMD_WREN (0x06)
#define CMD_READ (0x03)
#define CMD_FAST_READ (0x0B)
#define CMD_BP (0x02)
#define CMD_AAIP (0xAD)
#define CMD_ERASE_4K (0x20)
#define CMD_ERASE_32K (0x52)
#define CMD_ERASE_64K (0xD8)
#define CMD_ERASE_full (0xC7)
#define CMD_JEDEC_ID (0x9F)
#define CMD_EBSY (0x70)
#define CMD_DBSY (0x80)
#define DUMMY (0xFF)
static struct spi_flash_sst25vfxx spi_flash_sst25vfxx;
static uint8_t sst25vfxx_read_status(struct spi_flash_sst25vfxx * spi_flash)
{
return rt_spi_sendrecv8(spi_flash->rt_spi_device, CMD_RDSR);
}
static void sst25vfxx_wait_busy(struct spi_flash_sst25vfxx * spi_flash)
{
while( sst25vfxx_read_status(spi_flash) & (0x01));
}
/** \brief write N page on [page]
*
* \param page uint32_t unit : byte (4096 * N,1 page = 4096byte)
* \param buffer const uint8_t*
* \param size uint32_t unit : byte ( 4096*N )
* \return uint32_t
*
*/
static uint32_t sst25vfxx_page_write(struct spi_flash_sst25vfxx * spi_flash, uint32_t page, const uint8_t * buffer, uint32_t size)
{
uint32_t index;
uint32_t need_wirte = size;
uint8_t send_buffer[6];
page &= ~0xFFF; // page size = 4096byte
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_ERASE_4K;
send_buffer[1] = (page >> 16);
send_buffer[2] = (page >> 8);
send_buffer[3] = (page);
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 4);
sst25vfxx_wait_busy(spi_flash); // wait erase done.
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_AAIP;
send_buffer[1] = (uint8_t)(page >> 16);
send_buffer[2] = (uint8_t)(page >> 8);
send_buffer[3] = (uint8_t)(page);
send_buffer[4] = *buffer++;
send_buffer[5] = *buffer++;
need_wirte -= 2;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 6);
sst25vfxx_wait_busy(spi_flash);
for(index=0; index < need_wirte/2; index++)
{
send_buffer[0] = CMD_AAIP;
send_buffer[1] = *buffer++;
send_buffer[2] = *buffer++;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 3);
sst25vfxx_wait_busy(spi_flash);
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
return size;
}
/* RT-Thread device interface */
static rt_err_t sst25vfxx_flash_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t sst25vfxx_flash_open(rt_device_t dev, rt_uint16_t oflag)
{
rt_err_t result;
uint8_t send_buffer[2];
struct spi_flash_sst25vfxx * spi_flash = (struct spi_flash_sst25vfxx *)dev;
/* lock spi flash */
result = rt_mutex_take(&(spi_flash->lock), RT_WAITING_FOREVER);
if(result != RT_EOK)
{
return result;
}
send_buffer[0] = CMD_DBSY;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_EWSR;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_WRSR;
send_buffer[1] = 0;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 2);
/* release lock */
rt_mutex_release(&(spi_flash->lock));
return RT_EOK;
}
static rt_err_t sst25vfxx_flash_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t sst25vfxx_flash_control(rt_device_t dev, int cmd, void *args)
{
struct spi_flash_sst25vfxx * spi_flash;
spi_flash = (struct spi_flash_sst25vfxx *)dev;
RT_ASSERT(dev != RT_NULL);
if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
{
struct rt_device_blk_geometry *geometry;
geometry = (struct rt_device_blk_geometry *)args;
if (geometry == RT_NULL) return -RT_ERROR;
geometry->bytes_per_sector = spi_flash->geometry.bytes_per_sector;
geometry->sector_count = spi_flash->geometry.sector_count;
geometry->block_size = spi_flash->geometry.block_size;
}
return RT_EOK;
}
static rt_size_t sst25vfxx_flash_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_err_t result;
uint8_t send_buffer[4];
struct spi_flash_sst25vfxx * spi_flash = (struct spi_flash_sst25vfxx *)dev;
uint32_t offset = pos * spi_flash->geometry.bytes_per_sector;
/* lock spi flash */
result = rt_mutex_take(&(spi_flash->lock), RT_WAITING_FOREVER);
if(result != RT_EOK)
{
return 0;
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_READ;
send_buffer[1] = (uint8_t)(offset>>16);
send_buffer[2] = (uint8_t)(offset>>8);
send_buffer[3] = (uint8_t)(offset);
rt_spi_send_then_recv(spi_flash->rt_spi_device, send_buffer, 4, buffer, size * spi_flash->geometry.bytes_per_sector);
/* release lock */
rt_mutex_release(&(spi_flash->lock));
return size;
}
static rt_size_t sst25vfxx_flash_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
uint32_t i;
rt_err_t result;
const uint8_t * write_buffer = buffer;
struct spi_flash_sst25vfxx * spi_flash = (struct spi_flash_sst25vfxx *)dev;
/* lock spi flash */
result = rt_mutex_take(&(spi_flash->lock), RT_WAITING_FOREVER);
if(result != RT_EOK)
{
return 0;
}
for(i=0; i<size; i++)
{
sst25vfxx_page_write(spi_flash,
(pos + i) * spi_flash->geometry.bytes_per_sector,
write_buffer,
spi_flash->geometry.bytes_per_sector);
write_buffer += spi_flash->geometry.bytes_per_sector;
}
/* release lock */
rt_mutex_release(&(spi_flash->lock));
return size;
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops sst25vfxx_device_ops =
{
sst25vfxx_flash_init,
sst25vfxx_flash_open,
sst25vfxx_flash_close,
sst25vfxx_flash_read,
sst25vfxx_flash_write,
sst25vfxx_flash_control
};
#endif
rt_err_t sst25vfxx_init(const char * flash_device_name, const char * spi_device_name)
{
struct rt_spi_device * rt_spi_device;
struct spi_flash_sst25vfxx * spi_flash = &spi_flash_sst25vfxx;
rt_spi_device = (struct rt_spi_device *)rt_device_find(spi_device_name);
if(rt_spi_device == RT_NULL)
{
FLASH_TRACE("spi device %s not found!\r\n", spi_device_name);
return -RT_ENOSYS;
}
spi_flash->rt_spi_device = rt_spi_device;
/* config spi */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible: Mode 0 and Mode 3 */
cfg.max_hz = 50000000; /* 50M */
rt_spi_configure(spi_flash->rt_spi_device, &cfg);
}
/* init flash */
{
rt_uint8_t cmd;
rt_uint8_t id_recv[3];
cmd = CMD_WRDI;
rt_spi_send(spi_flash->rt_spi_device, &cmd, 1);
/* read flash id */
cmd = CMD_JEDEC_ID;
rt_spi_send_then_recv(spi_flash->rt_spi_device, &cmd, 1, id_recv, 3);
if(id_recv[0] != MF_ID || id_recv[1] != MT_ID)
{
FLASH_TRACE("Manufacturer’s ID or Memory Type error!\r\n");
FLASH_TRACE("JEDEC Read-ID Data : %02X %02X %02X\r\n", id_recv[0], id_recv[1], id_recv[2]);
return -RT_ENOSYS;
}
spi_flash->geometry.bytes_per_sector = 4096;
spi_flash->geometry.block_size = 4096; /* block erase: 4k */
if(id_recv[2] == MC_ID_SST25VF020B)
{
FLASH_TRACE("SST25VF020B detection\r\n");
spi_flash->geometry.sector_count = 64;
}
else if(id_recv[2] == MC_ID_SST25VF040B)
{
FLASH_TRACE("SST25VF040B detection\r\n");
spi_flash->geometry.sector_count = 128;
}
else if(id_recv[2] == MC_ID_SST25VF080B)
{
FLASH_TRACE("SST25VF080B detection\r\n");
spi_flash->geometry.sector_count = 256;
}
else if(id_recv[2] == MC_ID_SST25VF016B)
{
FLASH_TRACE("SST25VF016B detection\r\n");
spi_flash->geometry.sector_count = 512;
}
else if(id_recv[2] == MC_ID_SST25VF032B)
{
FLASH_TRACE("SST25VF032B detection\r\n");
spi_flash->geometry.sector_count = 1024;
}
else if(id_recv[2] == MC_ID_SST25VF064C)
{
FLASH_TRACE("SST25VF064C detection\r\n");
spi_flash->geometry.sector_count = 2048;
}
else
{
FLASH_TRACE("Memory Capacity error!\r\n");
return -RT_ENOSYS;
}
}
/* initialize mutex lock */
rt_mutex_init(&spi_flash->lock, flash_device_name, RT_IPC_FLAG_PRIO);
/* register device */
spi_flash->flash_device.type = RT_Device_Class_Block;
#ifdef RT_USING_DEVICE_OPS
spi_flash->flash_device.ops = &sst25vfxx_device_ops;
#else
spi_flash->flash_device.init = sst25vfxx_flash_init;
spi_flash->flash_device.open = sst25vfxx_flash_open;
spi_flash->flash_device.close = sst25vfxx_flash_close;
spi_flash->flash_device.read = sst25vfxx_flash_read;
spi_flash->flash_device.write = sst25vfxx_flash_write;
spi_flash->flash_device.control = sst25vfxx_flash_control;
#endif
/* no private */
spi_flash->flash_device.user_data = RT_NULL;
rt_device_register(&spi_flash->flash_device, flash_device_name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STANDALONE);
return RT_EOK;
}
components/drivers/spi/spi_flash_sst25vfxx.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
*/
#ifndef SPI_FLASH_SST25VFXX_H_INCLUDED
#define SPI_FLASH_SST25VFXX_H_INCLUDED
#include <rtthread.h>
#include <drivers/spi.h>
struct spi_flash_sst25vfxx
{
struct rt_device flash_device;
struct rt_device_blk_geometry geometry;
struct rt_spi_device * rt_spi_device;
struct rt_mutex lock;
};
extern rt_err_t sst25vfxx_init(const char * flash_device_name, const char * spi_device_name);
#endif // SPI_FLASH_SST25VFXX_H_INCLUDED
components/drivers/spi/spi_flash_w25qxx.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
* 2012-05-06 aozima can page write.
* 2012-08-23 aozima add flash lock.
* 2012-08-24 aozima fixed write status register BUG.
*/
#include <stdint.h>
#include <rtdevice.h>
#include "spi_flash.h"
#include "spi_flash_w25qxx.h"
#define FLASH_DEBUG
#ifdef FLASH_DEBUG
#define FLASH_TRACE rt_kprintf
#else
#define FLASH_TRACE(...)
#endif /* #ifdef FLASH_DEBUG */
#define PAGE_SIZE 4096
/* JEDEC Manufacturer ID */
#define MF_ID (0xEF)
/* JEDEC Device ID: Memory type and Capacity */
#define MTC_W25Q80_BV (0x4014) /* W25Q80BV */
#define MTC_W25Q16_BV_CL_CV (0x4015) /* W25Q16BV W25Q16CL W25Q16CV */
#define MTC_W25Q16_DW (0x6015) /* W25Q16DW */
#define MTC_W25Q32_BV (0x4016) /* W25Q32BV */
#define MTC_W25Q32_DW (0x6016) /* W25Q32DW */
#define MTC_W25Q64_BV_CV (0x4017) /* W25Q64BV W25Q64CV */
#define MTC_W25Q64_DW (0x4017) /* W25Q64DW */
#define MTC_W25Q128_BV (0x4018) /* W25Q128BV */
#define MTC_W25Q256_FV (TBD) /* W25Q256FV */
/* command list */
#define CMD_WRSR (0x01) /* Write Status Register */
#define CMD_PP (0x02) /* Page Program */
#define CMD_READ (0x03) /* Read Data */
#define CMD_WRDI (0x04) /* Write Disable */
#define CMD_RDSR1 (0x05) /* Read Status Register-1 */
#define CMD_WREN (0x06) /* Write Enable */
#define CMD_FAST_READ (0x0B) /* Fast Read */
#define CMD_ERASE_4K (0x20) /* Sector Erase:4K */
#define CMD_RDSR2 (0x35) /* Read Status Register-2 */
#define CMD_ERASE_32K (0x52) /* 32KB Block Erase */
#define CMD_JEDEC_ID (0x9F) /* Read JEDEC ID */
#define CMD_ERASE_full (0xC7) /* Chip Erase */
#define CMD_ERASE_64K (0xD8) /* 64KB Block Erase */
#define DUMMY (0xFF)
static struct spi_flash_device spi_flash_device;
static void flash_lock(struct spi_flash_device * flash_device)
{
rt_mutex_take(&flash_device->lock, RT_WAITING_FOREVER);
}
static void flash_unlock(struct spi_flash_device * flash_device)
{
rt_mutex_release(&flash_device->lock);
}
static uint8_t w25qxx_read_status(void)
{
return rt_spi_sendrecv8(spi_flash_device.rt_spi_device, CMD_RDSR1);
}
static void w25qxx_wait_busy(void)
{
while( w25qxx_read_status() & (0x01));
}
/** \brief read [size] byte from [offset] to [buffer]
*
* \param offset uint32_t unit : byte
* \param buffer uint8_t*
* \param size uint32_t unit : byte
* \return uint32_t byte for read
*
*/
static uint32_t w25qxx_read(uint32_t offset, uint8_t * buffer, uint32_t size)
{
uint8_t send_buffer[4];
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_READ;
send_buffer[1] = (uint8_t)(offset>>16);
send_buffer[2] = (uint8_t)(offset>>8);
send_buffer[3] = (uint8_t)(offset);
rt_spi_send_then_recv(spi_flash_device.rt_spi_device,
send_buffer, 4,
buffer, size);
return size;
}
/** \brief write N page on [page]
*
* \param page_addr uint32_t unit : byte (4096 * N,1 page = 4096byte)
* \param buffer const uint8_t*
* \return uint32_t
*
*/
uint32_t w25qxx_page_write(uint32_t page_addr, const uint8_t* buffer)
{
uint32_t index;
uint8_t send_buffer[4];
RT_ASSERT((page_addr&0xFF) == 0); /* page addr must align to 256byte. */
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_ERASE_4K;
send_buffer[1] = (page_addr >> 16);
send_buffer[2] = (page_addr >> 8);
send_buffer[3] = (page_addr);
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 4);
w25qxx_wait_busy(); // wait erase done.
for(index=0; index < (PAGE_SIZE / 256); index++)
{
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_PP;
send_buffer[1] = (uint8_t)(page_addr >> 16);
send_buffer[2] = (uint8_t)(page_addr >> 8);
send_buffer[3] = (uint8_t)(page_addr);
rt_spi_send_then_send(spi_flash_device.rt_spi_device,
send_buffer,
4,
buffer,
256);
buffer += 256;
page_addr += 256;
w25qxx_wait_busy();
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
return PAGE_SIZE;
}
/* RT-Thread device interface */
static rt_err_t w25qxx_flash_init(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t w25qxx_flash_open(rt_device_t dev, rt_uint16_t oflag)
{
uint8_t send_buffer[3];
flash_lock((struct spi_flash_device *)dev);
send_buffer[0] = CMD_WREN;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_WRSR;
send_buffer[1] = 0;
send_buffer[2] = 0;
rt_spi_send(spi_flash_device.rt_spi_device, send_buffer, 3);
w25qxx_wait_busy();
flash_unlock((struct spi_flash_device *)dev);
return RT_EOK;
}
static rt_err_t w25qxx_flash_close(rt_device_t dev)
{
return RT_EOK;
}
static rt_err_t w25qxx_flash_control(rt_device_t dev, int cmd, void *args)
{
RT_ASSERT(dev != RT_NULL);
if (cmd == RT_DEVICE_CTRL_BLK_GETGEOME)
{
struct rt_device_blk_geometry *geometry;
geometry = (struct rt_device_blk_geometry *)args;
if (geometry == RT_NULL) return -RT_ERROR;
geometry->bytes_per_sector = spi_flash_device.geometry.bytes_per_sector;
geometry->sector_count = spi_flash_device.geometry.sector_count;
geometry->block_size = spi_flash_device.geometry.block_size;
}
return RT_EOK;
}
static rt_size_t w25qxx_flash_read(rt_device_t dev,
rt_off_t pos,
void* buffer,
rt_size_t size)
{
flash_lock((struct spi_flash_device *)dev);
w25qxx_read(pos*spi_flash_device.geometry.bytes_per_sector,
buffer,
size*spi_flash_device.geometry.bytes_per_sector);
flash_unlock((struct spi_flash_device *)dev);
return size;
}
static rt_size_t w25qxx_flash_write(rt_device_t dev,
rt_off_t pos,
const void* buffer,
rt_size_t size)
{
rt_size_t i = 0;
rt_size_t block = size;
const uint8_t * ptr = buffer;
flash_lock((struct spi_flash_device *)dev);
while(block--)
{
w25qxx_page_write((pos + i)*spi_flash_device.geometry.bytes_per_sector,
ptr);
ptr += PAGE_SIZE;
i++;
}
flash_unlock((struct spi_flash_device *)dev);
return size;
}
#ifdef RT_USING_DEVICE_OPS
const static struct rt_device_ops w25qxx_device_ops =
{
w25qxx_flash_init,
w25qxx_flash_open,
w25qxx_flash_close,
w25qxx_flash_read,
w25qxx_flash_write,
w25qxx_flash_control
};
#endif
rt_err_t w25qxx_init(const char * flash_device_name, const char * spi_device_name)
{
struct rt_spi_device * rt_spi_device;
/* initialize mutex */
if (rt_mutex_init(&spi_flash_device.lock, spi_device_name, RT_IPC_FLAG_FIFO) != RT_EOK)
{
rt_kprintf("init sd lock mutex failed\n");
return -RT_ENOSYS;
}
rt_spi_device = (struct rt_spi_device *)rt_device_find(spi_device_name);
if(rt_spi_device == RT_NULL)
{
FLASH_TRACE("spi device %s not found!\r\n", spi_device_name);
return -RT_ENOSYS;
}
spi_flash_device.rt_spi_device = rt_spi_device;
/* config spi */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible: Mode 0 and Mode 3 */
cfg.max_hz = 50 * 1000 * 1000; /* 50M */
rt_spi_configure(spi_flash_device.rt_spi_device, &cfg);
}
/* init flash */
{
rt_uint8_t cmd;
rt_uint8_t id_recv[3];
uint16_t memory_type_capacity;
flash_lock(&spi_flash_device);
cmd = 0xFF; /* reset SPI FLASH, cancel all cmd in processing. */
rt_spi_send(spi_flash_device.rt_spi_device, &cmd, 1);
cmd = CMD_WRDI;
rt_spi_send(spi_flash_device.rt_spi_device, &cmd, 1);
/* read flash id */
cmd = CMD_JEDEC_ID;
rt_spi_send_then_recv(spi_flash_device.rt_spi_device, &cmd, 1, id_recv, 3);
flash_unlock(&spi_flash_device);
if(id_recv[0] != MF_ID)
{
FLASH_TRACE("Manufacturers ID error!\r\n");
FLASH_TRACE("JEDEC Read-ID Data : %02X %02X %02X\r\n", id_recv[0], id_recv[1], id_recv[2]);
return -RT_ENOSYS;
}
spi_flash_device.geometry.bytes_per_sector = 4096;
spi_flash_device.geometry.block_size = 4096; /* block erase: 4k */
/* get memory type and capacity */
memory_type_capacity = id_recv[1];
memory_type_capacity = (memory_type_capacity << 8) | id_recv[2];
if(memory_type_capacity == MTC_W25Q128_BV)
{
FLASH_TRACE("W25Q128BV detection\r\n");
spi_flash_device.geometry.sector_count = 4096;
}
else if(memory_type_capacity == MTC_W25Q64_BV_CV)
{
FLASH_TRACE("W25Q64BV or W25Q64CV detection\r\n");
spi_flash_device.geometry.sector_count = 2048;
}
else if(memory_type_capacity == MTC_W25Q64_DW)
{
FLASH_TRACE("W25Q64DW detection\r\n");
spi_flash_device.geometry.sector_count = 2048;
}
else if(memory_type_capacity == MTC_W25Q32_BV)
{
FLASH_TRACE("W25Q32BV detection\r\n");
spi_flash_device.geometry.sector_count = 1024;
}
else if(memory_type_capacity == MTC_W25Q32_DW)
{
FLASH_TRACE("W25Q32DW detection\r\n");
spi_flash_device.geometry.sector_count = 1024;
}
else if(memory_type_capacity == MTC_W25Q16_BV_CL_CV)
{
FLASH_TRACE("W25Q16BV or W25Q16CL or W25Q16CV detection\r\n");
spi_flash_device.geometry.sector_count = 512;
}
else if(memory_type_capacity == MTC_W25Q16_DW)
{
FLASH_TRACE("W25Q16DW detection\r\n");
spi_flash_device.geometry.sector_count = 512;
}
else if(memory_type_capacity == MTC_W25Q80_BV)
{
FLASH_TRACE("W25Q80BV detection\r\n");
spi_flash_device.geometry.sector_count = 256;
}
else
{
FLASH_TRACE("Memory Capacity error!\r\n");
return -RT_ENOSYS;
}
}
/* register device */
spi_flash_device.flash_device.type = RT_Device_Class_Block;
#ifdef RT_USING_DEVICE_OPS
spi_flash_device.flash_device.ops = &w25qxx_device_ops;
#else
spi_flash_device.flash_device.init = w25qxx_flash_init;
spi_flash_device.flash_device.open = w25qxx_flash_open;
spi_flash_device.flash_device.close = w25qxx_flash_close;
spi_flash_device.flash_device.read = w25qxx_flash_read;
spi_flash_device.flash_device.write = w25qxx_flash_write;
spi_flash_device.flash_device.control = w25qxx_flash_control;
#endif
/* no private */
spi_flash_device.flash_device.user_data = RT_NULL;
rt_device_register(&spi_flash_device.flash_device, flash_device_name,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STANDALONE);
return RT_EOK;
}
components/drivers/spi/spi_flash_w25qxx.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
* 2012-08-23 aozima add flash lock.
*/
#ifndef SPI_FLASH_W25QXX_H_INCLUDED
#define SPI_FLASH_W25QXX_H_INCLUDED
#include <rtthread.h>
extern rt_err_t w25qxx_init(const char * flash_device_name,
const char * spi_device_name);
#endif // SPI_FLASH_W25QXX_H_INCLUDED
components/drivers/spi/spi_flash_w25qxx_mtd.c 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
#include <rtthread.h>
#include <rtdevice.h>
#include "spi_flash.h"
#include "spi_flash_w25qxx_mtd.h"
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#define FLASH_DEBUG
#ifdef FLASH_DEBUG
#define FLASH_TRACE printf
#else
#define FLASH_TRACE(...)
#endif /* #ifdef FLASH_DEBUG */
/* JEDEC Manufacturer’s ID */
#define MF_ID (0xEF)
/* JEDEC Device ID: Memory type and Capacity */
#define MTC_W25Q80_BV (0x4014) /* W25Q80BV */
#define MTC_W25Q16_BV_CL_CV (0x4015) /* W25Q16BV W25Q16CL W25Q16CV */
#define MTC_W25Q16_DW (0x6015) /* W25Q16DW */
#define MTC_W25Q32_BV (0x4016) /* W25Q32BV */
#define MTC_W25Q32_DW (0x6016) /* W25Q32DW */
#define MTC_W25Q64_BV_CV (0x4017) /* W25Q64BV W25Q64CV */
#define MTC_W25Q64_DW (0x4017) /* W25Q64DW */
#define MTC_W25Q128_BV (0x4018) /* W25Q128BV */
#define MTC_W25Q256_FV (TBD) /* W25Q256FV */
#define MTC_W25X80 (0x3014)
/* command list */
#define CMD_WRSR (0x01) /* Write Status Register */
#define CMD_PP (0x02) /* Page Program */
#define CMD_READ (0x03) /* Read Data */
#define CMD_WRDI (0x04) /* Write Disable */
#define CMD_RDSR1 (0x05) /* Read Status Register-1 */
#define CMD_WREN (0x06) /* Write Enable */
#define CMD_FAST_READ (0x0B) /* Fast Read */
#define CMD_ERASE_4K (0x20) /* Sector Erase:4K */
#define CMD_RDSR2 (0x35) /* Read Status Register-2 */
#define CMD_ERASE_32K (0x52) /* 32KB Block Erase */
#define CMD_JEDEC_ID (0x9F) /* Read JEDEC ID */
#define CMD_ERASE_full (0xC7) /* Chip Erase */
#define CMD_ERASE_64K (0xD8) /* 64KB Block Erase */
#define CMD_MANU_ID (0x90)
#define DUMMY (0xFF)
#define FLASH_ERASE_CMD CMD_ERASE_4K
#define FLASH_BLOCK_SIZE 4096
#define FLASH_PAGE_SIZE 256
static void w25qxx_lock(struct rt_mtd_nor_device *device)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
rt_mutex_take(&mtd->lock, RT_WAITING_FOREVER);
}
static void w25qxx_unlock(struct rt_mtd_nor_device *device)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
rt_mutex_release(&mtd->lock);
}
static rt_uint8_t w25qxx_read_status(struct rt_mtd_nor_device *device)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
return rt_spi_sendrecv8(mtd->rt_spi_device, CMD_RDSR1);
}
static void w25qxx_wait_busy(struct rt_mtd_nor_device *device)
{
while( w25qxx_read_status(device) & (0x01));
}
static rt_err_t w25qxx_read_id(struct rt_mtd_nor_device *device)
{
rt_uint8_t cmd;
rt_uint8_t id_recv[3];
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
w25qxx_lock(device);
cmd = 0xFF; /* reset SPI FLASH, cancel all cmd in processing. */
rt_spi_send(mtd->rt_spi_device, &cmd, 1);
cmd = CMD_WRDI;
rt_spi_send(mtd->rt_spi_device, &cmd, 1);
/* read flash id */
cmd = CMD_JEDEC_ID;
rt_spi_send_then_recv(mtd->rt_spi_device, &cmd, 1, id_recv, 3);
w25qxx_unlock(device);
return (rt_uint32_t)(id_recv[0] << 16) | (id_recv[1] << 8) | id_recv[2];
}
static rt_size_t w25qxx_read(struct rt_mtd_nor_device *device, rt_off_t offset, rt_uint8_t *buffer, rt_size_t length)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
rt_uint8_t send_buffer[4];
if((offset + length) > device->block_end * FLASH_BLOCK_SIZE)
return 0;
w25qxx_lock(device);
send_buffer[0] = CMD_WRDI;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
send_buffer[0] = CMD_READ;
send_buffer[1] = (rt_uint8_t)(offset>>16);
send_buffer[2] = (rt_uint8_t)(offset>>8);
send_buffer[3] = (rt_uint8_t)(offset);
rt_spi_send_then_recv(mtd->rt_spi_device,
send_buffer, 4,
buffer, length);
w25qxx_unlock(device);
return length;
}
static rt_size_t w25qxx_write(struct rt_mtd_nor_device *device, rt_off_t offset, const rt_uint8_t *buffer, rt_size_t length)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
rt_uint8_t send_buffer[4];
rt_uint8_t *write_ptr ;
rt_size_t write_size,write_total;
if((offset + length) > device->block_end * FLASH_BLOCK_SIZE)
return 0;
w25qxx_lock(device);
send_buffer[0] = CMD_WREN;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
w25qxx_wait_busy(device); // wait erase done.
write_size = 0;
write_total = 0;
write_ptr = (rt_uint8_t *)buffer;
while(write_total < length)
{
send_buffer[0] = CMD_WREN;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
//write first page...
send_buffer[0] = CMD_PP;
send_buffer[1] = (rt_uint8_t)(offset >> 16);
send_buffer[2] = (rt_uint8_t)(offset >> 8);
send_buffer[3] = (rt_uint8_t)(offset);
//address % FLASH_PAGE_SIZE + length
if(((offset & (FLASH_PAGE_SIZE - 1)) + (length - write_total)) > FLASH_PAGE_SIZE)
{
write_size = FLASH_PAGE_SIZE - (offset & (FLASH_PAGE_SIZE - 1));
}
else
{
write_size = (length - write_total);
}
rt_spi_send_then_send(mtd->rt_spi_device,
send_buffer, 4,
write_ptr + write_total, write_size);
w25qxx_wait_busy(device);
offset += write_size;
write_total += write_size;
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
w25qxx_unlock(device);
return length;
}
static rt_err_t w25qxx_erase_block(struct rt_mtd_nor_device *device, rt_off_t offset, rt_uint32_t length)
{
struct spi_flash_mtd *mtd = (struct spi_flash_mtd *)device;
rt_uint8_t send_buffer[4];
rt_uint32_t erase_size = 0;
//offset must be ALIGN_DOWN to BLOCKSIZE
if(offset != RT_ALIGN_DOWN(offset,FLASH_BLOCK_SIZE))
return 0;
if((offset + length) > device->block_end * FLASH_BLOCK_SIZE)
return 0;
/* check length must align to block size */
if(length % device->block_size != 0)
{
rt_kprintf("param length = %d ,error\n",length);
return 0;
}
w25qxx_lock(device);
send_buffer[0] = CMD_WREN;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
w25qxx_wait_busy(device); // wait erase done.
while (erase_size < length)
{
send_buffer[0] = CMD_ERASE_4K;
send_buffer[1] = (rt_uint8_t) (offset >> 16);
send_buffer[2] = (rt_uint8_t) (offset >> 8);
send_buffer[3] = (rt_uint8_t) (offset);
rt_spi_send(mtd->rt_spi_device, send_buffer, 4);
w25qxx_wait_busy(device); // wait erase done.
erase_size += 4096;
offset += 4096;
}
send_buffer[0] = CMD_WRDI;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
w25qxx_unlock(device);
return RT_EOK;
}
const static struct rt_mtd_nor_driver_ops w25qxx_mtd_ops =
{
w25qxx_read_id,
w25qxx_read,
w25qxx_write,
w25qxx_erase_block,
};
rt_err_t w25qxx_mtd_init(const char *mtd_name,const char * spi_device_name)
{
rt_err_t result = RT_EOK;
rt_uint32_t id;
rt_uint8_t send_buffer[3];
struct rt_spi_device* rt_spi_device;
struct spi_flash_mtd* mtd = (struct spi_flash_mtd *)rt_malloc(sizeof(struct spi_flash_mtd));
RT_ASSERT(mtd != RT_NULL);
/* initialize mutex */
if (rt_mutex_init(&mtd->lock, mtd_name, RT_IPC_FLAG_FIFO) != RT_EOK)
{
FLASH_TRACE("init mtd lock mutex failed\n");
result = -RT_ENOSYS;
goto _error_exit;
}
rt_spi_device = (struct rt_spi_device *)rt_device_find(spi_device_name);
if(rt_spi_device == RT_NULL)
{
FLASH_TRACE("spi device %s not found!\r\n", spi_device_name);
result = -RT_ENOSYS;
goto _error_exit;
}
mtd->rt_spi_device = rt_spi_device;
/* config spi */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible: Mode 0 and Mode 3 */
cfg.max_hz = 20 * 1000 * 1000; /* 20 */
rt_spi_configure(rt_spi_device, &cfg);
}
/* Init Flash device */
{
w25qxx_lock(&mtd->mtd_device);
send_buffer[0] = CMD_WREN;
rt_spi_send(mtd->rt_spi_device, send_buffer, 1);
w25qxx_wait_busy(&mtd->mtd_device);
send_buffer[0] = CMD_WRSR;
send_buffer[1] = 0;
send_buffer[2] = 0;
rt_spi_send(mtd->rt_spi_device, send_buffer, 3);
w25qxx_wait_busy(&mtd->mtd_device);
w25qxx_unlock(&mtd->mtd_device);
}
id = w25qxx_read_id(&mtd->mtd_device);
mtd->mtd_device.block_size = 4096;
mtd->mtd_device.block_start = 0;
switch(id & 0xFFFF)
{
case MTC_W25Q80_BV: /* W25Q80BV */
mtd->mtd_device.block_end = 256;
break;
case MTC_W25Q16_BV_CL_CV: /* W25Q16BV W25Q16CL W25Q16CV */
case MTC_W25Q16_DW: /* W25Q16DW */
mtd->mtd_device.block_end = 512;
break;
case MTC_W25Q32_BV: /* W25Q32BV */
case MTC_W25Q32_DW: /* W25Q32DW */
mtd->mtd_device.block_end = 1024;
break;
case MTC_W25Q64_BV_CV: /* W25Q64BV W25Q64CV */
mtd->mtd_device.block_end = 2048;
break;
case MTC_W25Q128_BV: /* W25Q128BV */
mtd->mtd_device.block_end = 4086;
break;
}
mtd->mtd_device.ops = &w25qxx_mtd_ops;
rt_mtd_nor_register_device(mtd_name,&mtd->mtd_device);
return RT_EOK;
_error_exit:
if(mtd != RT_NULL)
rt_free(mtd);
return result;
}
components/drivers/spi/spi_flash_w25qxx_mtd.h 已删除 100644 → 0
浏览文件 @ c45f2f4c
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2011-12-16 aozima the first version
* 2012-08-23 aozima add flash lock.
* 2017-02-11 urey add mtd fucntion
*/
#ifndef SPI_FLASH_W25QXX_H_INCLUDED
#define SPI_FLASH_W25QXX_H_INCLUDED
#include <rtthread.h>
extern rt_err_t w25qxx_mtd_init(const char *mtd_name,const char * spi_device_name);
#endif // SPI_FLASH_W25QXX_H_INCLUDED
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或