[bsp][stm32l475-atk-pandora]adapt new pm interface for stm32l475-atk-pandora.

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h

@@ -69,7 +69,7 @@
 #define HAL_IWDG_MODULE_ENABLED
 /*#define HAL_LTDC_MODULE_ENABLED   */
 /*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
+#define HAL_LPTIM_MODULE_ENABLED
 /*#define HAL_NAND_MODULE_ENABLED   */
 /*#define HAL_NOR_MODULE_ENABLED   */
 /*#define HAL_OPAMP_MODULE_ENABLED   */

bsp/stm32/stm32l475-atk-pandora/board/board.c

@@ -10,55 +10,222 @@
  * Change Logs:
  * Date           Author       Notes
  * 2009-01-05     Bernard      first implementation
+ * 2019-05-09     Zero-Free    Adding multiple configurations for system clock frequency
  */
 
 #include <board.h>
+#include <rtthread.h>
 
 void SystemClock_Config(void)
 {
-  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
-  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
-  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+    RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
 
-  /**Initializes the CPU, AHB and APB busses clocks 
-  */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
-  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = 1;
-  RCC_OscInitStruct.PLL.PLLN = 20;
-  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
-  RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
-  RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
-  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /**Initializes the CPU, AHB and APB busses clocks 
-  */
-  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
-
-  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_USART2;
-  PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
-  PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
-  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /**Configure the main internal regulator output voltage 
+    /**Initializes the CPU, AHB and APB busses clocks
+    */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLM = 1;
+    RCC_OscInitStruct.PLL.PLLN = 20;
+    RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
+    RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+    RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /**Initializes the CPU, AHB and APB busses clocks
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2;
+    PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
+    PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /**Configure the main internal regulator output voltage
+    */
+    if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+#ifdef RT_USING_PM
+
+void SystemClock_MSI_ON(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct   = {0};
+    RCC_ClkInitTypeDef RCC_ClkInitStruct   = {0};
+
+    /* Initializes the CPU, AHB and APB busses clocks */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+    RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    RCC_ClkInitStruct.ClockType       = RCC_CLOCKTYPE_SYSCLK;
+    RCC_ClkInitStruct.SYSCLKSource    = RCC_SYSCLKSOURCE_MSI;
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+void SystemClock_MSI_OFF(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+
+    RCC_OscInitStruct.OscillatorType  = RCC_OSCILLATORTYPE_MSI;
+    RCC_OscInitStruct.HSIState        = RCC_MSI_OFF;
+    RCC_OscInitStruct.PLL.PLLState    = RCC_PLL_NONE;  /* No update on PLL */
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+void SystemClock_80M(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+    /**Initializes the CPU, AHB and APB busses clocks */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLM = 1;
+    RCC_OscInitStruct.PLL.PLLN = 20;
+    RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
+    RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+    RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+
+    /**Initializes the CPU, AHB and APB busses clocks
+    */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+void SystemClock_24M(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+    /** Initializes the CPU, AHB and APB busses clocks */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+    RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+    RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+    RCC_OscInitStruct.PLL.PLLM = 1;
+    RCC_OscInitStruct.PLL.PLLN = 12;
+    RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7;
+    RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
+    RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV4;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    /** Initializes the CPU, AHB and APB busses clocks */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+}
+
+void SystemClock_2M(void)
+{
+    RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+    RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+
+    /* MSI is enabled after System reset, update MSI to 2Mhz (RCC_MSIRANGE_5) */
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+    RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+    RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
+    RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+    RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+    {
+        /* Initialization Error */
+        Error_Handler();
+    }
+
+    /* Select MSI as system clock source and configure the HCLK, PCLK1 and PCLK2
+       clocks dividers */
+    RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
+    RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+    RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+    RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+    {
+        /* Initialization Error */
+        Error_Handler();
+    }
+}
+
+/**
+  * @brief  Configures system clock after wake-up from STOP: enable HSI, PLL
+  *         and select PLL as system clock source.
+  * @param  None
+  * @retval None
   */
-  if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
-  {
-    Error_Handler();
-  }
+void SystemClock_ReConfig(uint8_t mode)
+{
+    SystemClock_MSI_ON();
+
+    switch (mode)
+    {
+    case PM_RUN_MODE_HIGH_SPEED:
+    case PM_RUN_MODE_NORMAL_SPEED:
+        SystemClock_80M();
+        break;
+    case PM_RUN_MODE_MEDIUM_SPEED:
+        SystemClock_24M();
+        break;
+    case PM_RUN_MODE_LOW_SPEED:
+        SystemClock_2M();
+        break;
+    default:
+        break;
+    }
+
+    // SystemClock_MSI_OFF();
 }
+
+#endif

bsp/stm32/stm32l475-atk-pandora/board/board.h

@@ -32,6 +32,12 @@ extern "C" {
 #define HEAP_END                       STM32_SRAM1_END
 
 void SystemClock_Config(void);
+void SystemClock_MSI_ON(void);
+void SystemClock_MSI_OFF(void);
+void SystemClock_80M(void);
+void SystemClock_24M(void);
+void SystemClock_2M(void);
+void SystemClock_ReConfig(uint8_t mode);
 
 #ifdef __cplusplus
 }