Skip to content

R
rt-thread

Mozi / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 0
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 4ef35a9d 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #3568 from NU-LL/l476_add_spi_adc_time 

support SPI/ADC/TIME on-chip peripheral driver
上级 dab737f6 c8e7093e
隐藏空白更改
内联 并排
Showing with 1284 addition and 152 deletion
bsp/stm32/stm32l476-st-nucleo/README.md
浏览文件 @ 4ef35a9d
......@@ -43,6 +43,9 @@
| UART | 支持 | UART2 |
| IIC | 支持 | 软件模拟 |
| RTC | 支持 | 支持外部晶振和内部低速时钟 |
| SPI | 支持 | SPI1/2/3 |
| ADC | 支持 | ADC1_IN1/ADC2_IN2/ADC3_IN3 |
| TIME | 支持 | TIME15/16/17 |
| **扩展模块** | **支持情况** | **备注** |
## 使用说明
......
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/.mxproject
浏览文件 @ 4ef35a9d
[PreviousGenFiles]
HeaderPath=D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc
HeaderPath=G:/1 Code/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc
HeaderFiles=stm32l4xx_it.h;stm32l4xx_hal_conf.h;main.h;
SourcePath=D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src
SourcePath=G:/1 Code/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src
SourceFiles=stm32l4xx_it.c;stm32l4xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l476xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
LibFiles=Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_adc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_adc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h;Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_lptim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rtc_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_spi_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h;Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l476xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h;Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
[PreviousUsedKeilFiles]
SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;../\Src/system_stm32l4xx.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;../\Src/system_stm32l4xx.c;../Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;D:/VariousProject/rt-thread/bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config//MDK-ARM/startup_stm32l476xx.s;
HeaderPath=..\Drivers\STM32L4xx_HAL_Driver\Inc;..\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32L4xx\Include;..\Drivers\CMSIS\Include;..\Inc;
SourceFiles=..\Src\main.c;..\Src\stm32l4xx_it.c;..\Src\stm32l4xx_hal_msp.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_adc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_lptim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rtc_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_spi_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c;..\\Src/system_stm32l4xx.c;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers/CMSIS/Device/ST/STM32L4xx/Source/Templates/system_stm32l4xx.c;;
HeaderPath=F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Device\ST\STM32L4xx\Include;F:\STM32Cube\Repository\STM32Cube_FW_L4_V1.15.1\Drivers\CMSIS\Include;..\Inc;
CDefines=USE_HAL_DRIVER;STM32L476xx;USE_HAL_DRIVER;USE_HAL_DRIVER;
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc
浏览文件 @ 4ef35a9d
#MicroXplorer Configuration settings - do not modify
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32L4
Mcu.IP0=NVIC
Mcu.IP1=RCC
Mcu.IP2=RTC
Mcu.IP3=SYS
Mcu.IP4=USART2
Mcu.IPNb=5
Mcu.Name=STM32L476R(C-E-G)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC14-OSC32_IN (PC14)
Mcu.Pin1=PC15-OSC32_OUT (PC15)
Mcu.Pin2=PA2
Mcu.Pin3=PA3
Mcu.Pin4=PA13 (JTMS-SWDIO)
Mcu.Pin5=PA14 (JTCK-SWCLK)
Mcu.Pin6=VP_RTC_VS_RTC_Activate
Mcu.Pin7=VP_SYS_VS_Systick
Mcu.PinsNb=8
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
PC3.Mode=Full_Duplex_Master
ProjectManager.MainLocation=Src
PA6.Mode=Full_Duplex_Master
RCC.USART1Freq_Value=80000000
RCC.SAI1Freq_Value=18285714.285714287
USART2.IPParameters=VirtualMode-Asynchronous
RCC.CortexFreq_Value=80000000
SPI3.Direction=SPI_DIRECTION_2LINES
VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
SPI3.VirtualType=VM_MASTER
ProjectManager.KeepUserCode=true
Mcu.UserName=STM32L476RGTx
MxCube.Version=5.0.1
MxDb.Version=DB.5.0.1
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
PA13\ (JTMS-SWDIO).Mode=Serial_Wire
PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
PA14\ (JTCK-SWCLK).Mode=Serial_Wire
PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
PA2.Mode=Asynchronous
PA2.Signal=USART2_TX
PA3.Mode=Asynchronous
PA3.Signal=USART2_RX
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
SPI1.VirtualType=VM_MASTER
SPI2.VirtualType=VM_MASTER
PB10.Mode=Full_Duplex_Master
ADC2.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_2
SH.ADCx_IN2.0=ADC2_IN2,IN2-Single-Ended
PC10.Signal=SPI3_SCK
PC12.Signal=SPI3_MOSI
RCC.PLLSAI1RoutputFreq_Value=64000000
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_SPI2_Init-SPI2-false-HAL-true,7-MX_SPI3_Init-SPI3-false-HAL-true,8-MX_TIM15_Init-TIM15-false-HAL-true,9-MX_TIM16_Init-TIM16-false-HAL-true,10-MX_TIM17_Init-TIM17-false-HAL-true,11-MX_ADC1_Init-ADC1-false-HAL-true,12-MX_ADC2_Init-ADC2-false-HAL-true,13-MX_ADC3_Init-ADC3-false-HAL-true,14-MX_LPTIM1_Init-LPTIM1-false-HAL-true
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
RCC.RTCFreq_Value=32768
RCC.USART2Freq_Value=80000000
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
PCC.Checker=true
PCC.Line=STM32L4x6
PCC.MCU=STM32L476R(C-E-G)Tx
PCC.PartNumber=STM32L476RGTx
PCC.Seq0=0
PCC.Series=STM32L4
PCC.Temperature=25
PCC.Vdd=null
ADC3.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_3
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32L476RGTx
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.13.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
RCC.MCO1PinFreq_Value=80000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
ProjectManager.StackSize=0x400
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
RCC.I2C3Freq_Value=80000000
RCC.LPTIM1Freq_Value=80000000
Mcu.IP4=NVIC
Mcu.IP5=RCC
RCC.FCLKCortexFreq_Value=80000000
Mcu.IP2=ADC3
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
Mcu.IP3=LPTIM1
Mcu.IP0=ADC1
Mcu.IP1=ADC2
Mcu.UserConstants=
RCC.VCOSAI1OutputFreq_Value=128000000
RCC.SDMMCFreq_Value=64000000
Mcu.ThirdPartyNb=0
SPI1.Direction=SPI_DIRECTION_2LINES
RCC.HCLKFreq_Value=80000000
SH.ADCx_IN3.0=ADC3_IN3,IN3-Single-Ended
Mcu.IPNb=15
ProjectManager.PreviousToolchain=
RCC.APB2TimFreq_Value=80000000
SPI1.CalculateBaudRate=40.0 MBits/s
SH.ADCx_IN3.ConfNb=1
PC3.Signal=SPI2_MOSI
Mcu.Pin6=PA2
RCC.SAI2Freq_Value=18285714.285714287
Mcu.Pin7=PA3
Mcu.Pin8=PA5
Mcu.Pin9=PA6
RCC.AHBFreq_Value=80000000
Mcu.Pin0=PC14-OSC32_IN (PC14)
Mcu.Pin1=PC15-OSC32_OUT (PC15)
Mcu.Pin2=PC0
Mcu.Pin3=PC1
RCC.USART3Freq_Value=80000000
Mcu.Pin4=PC2
Mcu.Pin5=PC3
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=CubeMX_Config.ioc
RCC.HSE_VALUE=8000000
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
Mcu.IP10=SYS
USART2.VirtualMode-Asynchronous=VM_ASYNC
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
Mcu.IP12=TIM16
Mcu.IP11=TIM15
ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
MxDb.Version=DB.5.0.60
Mcu.IP14=USART2
Mcu.IP13=TIM17
ProjectManager.BackupPrevious=false
RCC.VCOInputFreq_Value=16000000
SH.ADCx_IN1.ConfNb=1
PB14.Mode=Full_Duplex_Master
File.Version=6
SPI2.CalculateBaudRate=40.0 MBits/s
ADC3.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag
RCC.PLLRCLKFreq_Value=80000000
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
ProjectManager.HalAssertFull=false
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
ProjectManager.ProjectName=CubeMX_Config
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
Mcu.Package=LQFP64
PA6.Signal=SPI1_MISO
SPI2.Mode=SPI_MODE_MASTER
SPI3.Mode=SPI_MODE_MASTER
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true
RCC.ADCFreq_Value=64000000
RCC.AHBFreq_Value=80000000
RCC.APB1Freq_Value=80000000
RCC.APB1TimFreq_Value=80000000
RCC.APB2Freq_Value=80000000
RCC.APB2TimFreq_Value=80000000
RCC.CortexFreq_Value=80000000
RCC.LSI_VALUE=32000
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
ADC3.Rank-0\#ChannelRegularConversion=1
RCC.LSCOPinFreq_Value=32000
ADC2.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
RCC.DFSDMFreq_Value=80000000
RCC.FCLKCortexFreq_Value=80000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=80000000
RCC.HSE_VALUE=8000000
RCC.HSI_VALUE=16000000
RCC.I2C1Freq_Value=80000000
RCC.I2C2Freq_Value=80000000
RCC.I2C3Freq_Value=80000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
RCC.LCDFreq_Value=32768
RCC.LPTIM1Freq_Value=80000000
RCC.LPTIM2Freq_Value=80000000
PC11.Mode=Full_Duplex_Master
ADC3.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
SH.ADCx_IN1.0=ADC1_IN1,IN1-Single-Ended
RCC.PLLPoutputFreq_Value=22857142.85714286
RCC.APB1TimFreq_Value=80000000
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
RCC.LPUART1Freq_Value=80000000
RCC.LSCOPinFreq_Value=32000
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=80000000
SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
SPI2.Direction=SPI_DIRECTION_2LINES
ADC2.Rank-0\#ChannelRegularConversion=1
PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
ProjectManager.CustomerFirmwarePackage=
PA3.Signal=USART2_RX
PA5.Mode=Full_Duplex_Master
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
RCC.MSI_VALUE=4000000
RCC.PLLN=10
RCC.PLLPoutputFreq_Value=22857142.85714286
RCC.PLLQoutputFreq_Value=80000000
RCC.PLLRCLKFreq_Value=80000000
RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
RCC.PLLSAI1QoutputFreq_Value=64000000
RCC.PLLSAI1RoutputFreq_Value=64000000
RCC.PLLSAI2PoutputFreq_Value=18285714.285714287
RCC.PLLSAI2RoutputFreq_Value=64000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
RCC.PWRFreq_Value=80000000
RCC.RNGFreq_Value=64000000
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
RCC.RTCFreq_Value=32768
RCC.SAI1Freq_Value=18285714.285714287
RCC.SAI2Freq_Value=18285714.285714287
RCC.SDMMCFreq_Value=64000000
PA14\ (JTCK-SWCLK).Mode=Serial_Wire
RCC.PLLQoutputFreq_Value=80000000
ProjectManager.ProjectFileName=CubeMX_Config.ioc
ADC1.Rank-0\#ChannelRegularConversion=1
PA7.Mode=Full_Duplex_Master
Mcu.PinsNb=24
ProjectManager.NoMain=false
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,master
ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
PC11.Signal=SPI3_MISO
RCC.SWPMI1Freq_Value=80000000
RCC.SYSCLKFreq_VALUE=80000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.UART4Freq_Value=80000000
RCC.UART5Freq_Value=80000000
RCC.USART1Freq_Value=80000000
RCC.USART2Freq_Value=80000000
RCC.USART3Freq_Value=80000000
PC2.Signal=ADCx_IN3
PC10.Mode=Full_Duplex_Master
ProjectManager.DefaultFWLocation=true
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
ProjectManager.DeletePrevious=true
PC0.Signal=ADCx_IN1
RCC.VCOSAI2OutputFreq_Value=128000000
VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
RCC.FamilyName=M
PA3.Mode=Asynchronous
ADC3.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
ProjectManager.TargetToolchain=MDK-ARM V5
ADC2.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
RCC.USBFreq_Value=64000000
RCC.VCOInputFreq_Value=16000000
RCC.PLLSAI1PoutputFreq_Value=18285714.285714287
PB10.Signal=SPI2_SCK
PB14.Signal=SPI2_MISO
RCC.PLLSAI2RoutputFreq_Value=64000000
PA5.Signal=SPI1_SCK
ADC2.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
PC12.Mode=Full_Duplex_Master
board=custom
RCC.VCOOutputFreq_Value=160000000
RCC.VCOSAI1OutputFreq_Value=128000000
RCC.VCOSAI2OutputFreq_Value=128000000
USART2.IPParameters=VirtualMode-Asynchronous
USART2.VirtualMode-Asynchronous=VM_ASYNC
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
ProjectManager.LastFirmware=true
RCC.APB2Freq_Value=80000000
RCC.UART4Freq_Value=80000000
SPI3.CalculateBaudRate=40.0 MBits/s
MxCube.Version=5.6.1
RCC.I2C1Freq_Value=80000000
SPI1.Mode=SPI_MODE_MASTER
RCC.LCDFreq_Value=32768
RCC.RNGFreq_Value=64000000
SH.ADCx_IN2.ConfNb=1
RCC.PLLSAI1QoutputFreq_Value=64000000
RCC.ADCFreq_Value=64000000
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
board=custom
VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
RCC.UART5Freq_Value=80000000
ProjectManager.FreePins=false
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
ProjectManager.AskForMigrate=true
Mcu.Name=STM32L476R(C-E-G)Tx
RCC.LPTIM2Freq_Value=80000000
PA2.Signal=USART2_TX
ProjectManager.UnderRoot=false
Mcu.IP8=SPI2
Mcu.IP9=SPI3
Mcu.IP6=RTC
Mcu.IP7=SPI1
ProjectManager.CoupleFile=false
PA13\ (JTMS-SWDIO).Mode=Serial_Wire
RCC.SYSCLKFreq_VALUE=80000000
Mcu.Pin22=VP_TIM16_VS_ClockSourceINT
Mcu.Pin23=VP_TIM17_VS_ClockSourceINT
Mcu.Pin20=VP_SYS_VS_Systick
ADC1.master=1
Mcu.Pin21=VP_TIM15_VS_ClockSourceINT
ADC2.NbrOfConversionFlag=1
RCC.PLLSAI2PoutputFreq_Value=18285714.285714287
NVIC.ForceEnableDMAVector=true
KeepUserPlacement=false
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
ProjectManager.CompilerOptimize=6
VP_TIM15_VS_ClockSourceINT.Mode=Internal
ProjectManager.HeapSize=0x200
Mcu.Pin15=PC10
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
Mcu.Pin16=PC11
Mcu.Pin13=PA13 (JTMS-SWDIO)
Mcu.Pin14=PA14 (JTCK-SWCLK)
Mcu.Pin19=VP_RTC_VS_RTC_Activate
ProjectManager.ComputerToolchain=false
Mcu.Pin17=PC12
RCC.HSI_VALUE=16000000
Mcu.Pin18=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
ADC1.NbrOfConversionFlag=1
Mcu.Pin11=PB10
Mcu.Pin12=PB14
RCC.PLLN=10
Mcu.Pin10=PA7
PA2.Mode=Asynchronous
VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
RCC.PWRFreq_Value=80000000
RCC.I2C2Freq_Value=80000000
RCC.APB1Freq_Value=80000000
ADC3.NbrOfConversionFlag=1
ProjectManager.DeviceId=STM32L476RGTx
PC1.Signal=ADCx_IN2
ProjectManager.LibraryCopy=2
PA7.Signal=SPI1_MOSI
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h
浏览文件 @ 4ef35a9d
......@@ -5,7 +5,7 @@
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
* <h2><center>&copy; COPYRIGHT(c) 2020 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
......@@ -49,7 +49,7 @@
*/
#define HAL_MODULE_ENABLED
/*#define HAL_ADC_MODULE_ENABLED */
#define HAL_ADC_MODULE_ENABLED
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_CAN_MODULE_ENABLED */
/*#define HAL_COMP_MODULE_ENABLED */
......@@ -70,12 +70,14 @@
/*#define HAL_LTDC_MODULE_ENABLED */
/*#define HAL_LCD_MODULE_ENABLED */
#define HAL_LPTIM_MODULE_ENABLED
/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_OPAMP_MODULE_ENABLED */
/*#define HAL_OSPI_MODULE_ENABLED */
/*#define HAL_OSPI_MODULE_ENABLED */
/*#define HAL_PCD_MODULE_ENABLED */
/*#define HAL_PKA_MODULE_ENABLED */
/*#define HAL_QSPI_MODULE_ENABLED */
/*#define HAL_QSPI_MODULE_ENABLED */
/*#define HAL_RNG_MODULE_ENABLED */
......@@ -84,16 +86,18 @@
/*#define HAL_SD_MODULE_ENABLED */
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
/*#define HAL_SPI_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
/*#define HAL_SRAM_MODULE_ENABLED */
/*#define HAL_SWPMI_MODULE_ENABLED */
/*#define HAL_TIM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
/*#define HAL_TSC_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
/*#define HAL_EXTI_MODULE_ENABLED */
/*#define HAL_PSSI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
......@@ -296,6 +300,10 @@
#include "stm32l4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32l4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32l4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
......@@ -332,6 +340,10 @@
#include "stm32l4xx_hal_ospi.h"
#endif /* HAL_OSPI_MODULE_ENABLED */
#ifdef HAL_PKA_MODULE_ENABLED
#include "stm32l4xx_hal_pka.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32l4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
......@@ -408,6 +420,10 @@
#include "stm32l4xx_hal_gfxmmu.h"
#endif /* HAL_GFXMMU_MODULE_ENABLED */
#ifdef HAL_PSSI_MODULE_ENABLED
#include "stm32l4xx_hal_pssi.h"
#endif /* HAL_PSSI_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
......@@ -418,7 +434,7 @@
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(char *file, uint32_t line);
#else
......
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c
浏览文件 @ 4ef35a9d
......@@ -62,8 +62,22 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
ADC_HandleTypeDef hadc1;
ADC_HandleTypeDef hadc2;
ADC_HandleTypeDef hadc3;
LPTIM_HandleTypeDef hlptim1;
RTC_HandleTypeDef hrtc;
SPI_HandleTypeDef hspi1;
SPI_HandleTypeDef hspi2;
SPI_HandleTypeDef hspi3;
TIM_HandleTypeDef htim15;
TIM_HandleTypeDef htim16;
TIM_HandleTypeDef htim17;
UART_HandleTypeDef huart2;
/* USER CODE BEGIN PV */
......@@ -76,6 +90,16 @@ void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART2_UART_Init(void);
static void MX_RTC_Init(void);
static void MX_SPI1_Init(void);
static void MX_SPI2_Init(void);
static void MX_SPI3_Init(void);
static void MX_TIM15_Init(void);
static void MX_TIM16_Init(void);
static void MX_TIM17_Init(void);
static void MX_ADC1_Init(void);
static void MX_ADC2_Init(void);
static void MX_ADC3_Init(void);
static void MX_LPTIM1_Init(void);
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
......@@ -116,6 +140,16 @@ int main(void)
MX_GPIO_Init();
MX_USART2_UART_Init();
MX_RTC_Init();
MX_SPI1_Init();
MX_SPI2_Init();
MX_SPI3_Init();
MX_TIM15_Init();
MX_TIM16_Init();
MX_TIM17_Init();
MX_ADC1_Init();
MX_ADC2_Init();
MX_ADC3_Init();
MX_LPTIM1_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
......@@ -143,11 +177,11 @@ void SystemClock_Config(void)
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Configure LSE Drive Capability
/** Configure LSE Drive Capability
*/
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
......@@ -164,7 +198,7 @@ void SystemClock_Config(void)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
......@@ -177,14 +211,24 @@ void SystemClock_Config(void)
{
Error_Handler();
}
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART2;
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART2
|RCC_PERIPHCLK_LPTIM1|RCC_PERIPHCLK_ADC;
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
PeriphClkInit.Lptim1ClockSelection = RCC_LPTIM1CLKSOURCE_PCLK;
PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
PeriphClkInit.PLLSAI1.PLLSAI1Source = RCC_PLLSOURCE_HSI;
PeriphClkInit.PLLSAI1.PLLSAI1M = 1;
PeriphClkInit.PLLSAI1.PLLSAI1N = 8;
PeriphClkInit.PLLSAI1.PLLSAI1P = RCC_PLLP_DIV7;
PeriphClkInit.PLLSAI1.PLLSAI1Q = RCC_PLLQ_DIV2;
PeriphClkInit.PLLSAI1.PLLSAI1R = RCC_PLLR_DIV2;
PeriphClkInit.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_ADC1CLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
/**Configure the main internal regulator output voltage
/** Configure the main internal regulator output voltage
*/
if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK)
{
......@@ -192,6 +236,219 @@ void SystemClock_Config(void)
}
}
/**
* @brief ADC1 Initialization Function
* @param None
* @retval None
*/
static void MX_ADC1_Init(void)
{
/* USER CODE BEGIN ADC1_Init 0 */
/* USER CODE END ADC1_Init 0 */
ADC_MultiModeTypeDef multimode = {0};
ADC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN ADC1_Init 1 */
/* USER CODE END ADC1_Init 1 */
/** Common config
*/
hadc1.Instance = ADC1;
hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc1.Init.LowPowerAutoWait = DISABLE;
hadc1.Init.ContinuousConvMode = DISABLE;
hadc1.Init.NbrOfConversion = 1;
hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.NbrOfDiscConversion = 1;
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc1.Init.DMAContinuousRequests = DISABLE;
hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc1.Init.OversamplingMode = DISABLE;
if (HAL_ADC_Init(&hadc1) != HAL_OK)
{
Error_Handler();
}
/** Configure the ADC multi-mode
*/
multimode.Mode = ADC_MODE_INDEPENDENT;
if (HAL_ADCEx_MultiModeConfigChannel(&hadc1, &multimode) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_1;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC1_Init 2 */
/* USER CODE END ADC1_Init 2 */
}
/**
* @brief ADC2 Initialization Function
* @param None
* @retval None
*/
static void MX_ADC2_Init(void)
{
/* USER CODE BEGIN ADC2_Init 0 */
/* USER CODE END ADC2_Init 0 */
ADC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN ADC2_Init 1 */
/* USER CODE END ADC2_Init 1 */
/** Common config
*/
hadc2.Instance = ADC2;
hadc2.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc2.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc2.Init.LowPowerAutoWait = DISABLE;
hadc2.Init.ContinuousConvMode = DISABLE;
hadc2.Init.NbrOfConversion = 1;
hadc2.Init.DiscontinuousConvMode = DISABLE;
hadc2.Init.NbrOfDiscConversion = 1;
hadc2.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc2.Init.DMAContinuousRequests = DISABLE;
hadc2.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc2.Init.OversamplingMode = DISABLE;
if (HAL_ADC_Init(&hadc2) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_2;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC2_Init 2 */
/* USER CODE END ADC2_Init 2 */
}
/**
* @brief ADC3 Initialization Function
* @param None
* @retval None
*/
static void MX_ADC3_Init(void)
{
/* USER CODE BEGIN ADC3_Init 0 */
/* USER CODE END ADC3_Init 0 */
ADC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN ADC3_Init 1 */
/* USER CODE END ADC3_Init 1 */
/** Common config
*/
hadc3.Instance = ADC3;
hadc3.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc3.Init.LowPowerAutoWait = DISABLE;
hadc3.Init.ContinuousConvMode = DISABLE;
hadc3.Init.NbrOfConversion = 1;
hadc3.Init.DiscontinuousConvMode = DISABLE;
hadc3.Init.NbrOfDiscConversion = 1;
hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc3.Init.DMAContinuousRequests = DISABLE;
hadc3.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc3.Init.OversamplingMode = DISABLE;
if (HAL_ADC_Init(&hadc3) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_3;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC3_Init 2 */
/* USER CODE END ADC3_Init 2 */
}
/**
* @brief LPTIM1 Initialization Function
* @param None
* @retval None
*/
static void MX_LPTIM1_Init(void)
{
/* USER CODE BEGIN LPTIM1_Init 0 */
/* USER CODE END LPTIM1_Init 0 */
/* USER CODE BEGIN LPTIM1_Init 1 */
/* USER CODE END LPTIM1_Init 1 */
hlptim1.Instance = LPTIM1;
hlptim1.Init.Clock.Source = LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC;
hlptim1.Init.Clock.Prescaler = LPTIM_PRESCALER_DIV1;
hlptim1.Init.Trigger.Source = LPTIM_TRIGSOURCE_SOFTWARE;
hlptim1.Init.OutputPolarity = LPTIM_OUTPUTPOLARITY_HIGH;
hlptim1.Init.UpdateMode = LPTIM_UPDATE_IMMEDIATE;
hlptim1.Init.CounterSource = LPTIM_COUNTERSOURCE_INTERNAL;
hlptim1.Init.Input1Source = LPTIM_INPUT1SOURCE_GPIO;
hlptim1.Init.Input2Source = LPTIM_INPUT2SOURCE_GPIO;
if (HAL_LPTIM_Init(&hlptim1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN LPTIM1_Init 2 */
/* USER CODE END LPTIM1_Init 2 */
}
/**
* @brief RTC Initialization Function
* @param None
......@@ -207,7 +464,7 @@ static void MX_RTC_Init(void)
/* USER CODE BEGIN RTC_Init 1 */
/* USER CODE END RTC_Init 1 */
/**Initialize RTC Only
/** Initialize RTC Only
*/
hrtc.Instance = RTC;
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
......@@ -227,6 +484,236 @@ static void MX_RTC_Init(void)
}
/**
* @brief SPI1 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI1_Init(void)
{
/* USER CODE BEGIN SPI1_Init 0 */
/* USER CODE END SPI1_Init 0 */
/* USER CODE BEGIN SPI1_Init 1 */
/* USER CODE END SPI1_Init 1 */
/* SPI1 parameter configuration*/
hspi1.Instance = SPI1;
hspi1.Init.Mode = SPI_MODE_MASTER;
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
hspi1.Init.DataSize = SPI_DATASIZE_4BIT;
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi1.Init.NSS = SPI_NSS_SOFT;
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi1.Init.CRCPolynomial = 7;
hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if (HAL_SPI_Init(&hspi1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI1_Init 2 */
/* USER CODE END SPI1_Init 2 */
}
/**
* @brief SPI2 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI2_Init(void)
{
/* USER CODE BEGIN SPI2_Init 0 */
/* USER CODE END SPI2_Init 0 */
/* USER CODE BEGIN SPI2_Init 1 */
/* USER CODE END SPI2_Init 1 */
/* SPI2 parameter configuration*/
hspi2.Instance = SPI2;
hspi2.Init.Mode = SPI_MODE_MASTER;
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi2.Init.NSS = SPI_NSS_SOFT;
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi2.Init.CRCPolynomial = 7;
hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if (HAL_SPI_Init(&hspi2) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI2_Init 2 */
/* USER CODE END SPI2_Init 2 */
}
/**
* @brief SPI3 Initialization Function
* @param None
* @retval None
*/
static void MX_SPI3_Init(void)
{
/* USER CODE BEGIN SPI3_Init 0 */
/* USER CODE END SPI3_Init 0 */
/* USER CODE BEGIN SPI3_Init 1 */
/* USER CODE END SPI3_Init 1 */
/* SPI3 parameter configuration*/
hspi3.Instance = SPI3;
hspi3.Init.Mode = SPI_MODE_MASTER;
hspi3.Init.Direction = SPI_DIRECTION_2LINES;
hspi3.Init.DataSize = SPI_DATASIZE_4BIT;
hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
hspi3.Init.NSS = SPI_NSS_SOFT;
hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
hspi3.Init.CRCPolynomial = 7;
hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
hspi3.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
if (HAL_SPI_Init(&hspi3) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SPI3_Init 2 */
/* USER CODE END SPI3_Init 2 */
}
/**
* @brief TIM15 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM15_Init(void)
{
/* USER CODE BEGIN TIM15_Init 0 */
/* USER CODE END TIM15_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
/* USER CODE BEGIN TIM15_Init 1 */
/* USER CODE END TIM15_Init 1 */
htim15.Instance = TIM15;
htim15.Init.Prescaler = 0;
htim15.Init.CounterMode = TIM_COUNTERMODE_UP;
htim15.Init.Period = 0;
htim15.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim15.Init.RepetitionCounter = 0;
htim15.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim15) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim15, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim15, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM15_Init 2 */
/* USER CODE END TIM15_Init 2 */
}
/**
* @brief TIM16 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM16_Init(void)
{
/* USER CODE BEGIN TIM16_Init 0 */
/* USER CODE END TIM16_Init 0 */
/* USER CODE BEGIN TIM16_Init 1 */
/* USER CODE END TIM16_Init 1 */
htim16.Instance = TIM16;
htim16.Init.Prescaler = 0;
htim16.Init.CounterMode = TIM_COUNTERMODE_UP;
htim16.Init.Period = 0;
htim16.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim16.Init.RepetitionCounter = 0;
htim16.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim16) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM16_Init 2 */
/* USER CODE END TIM16_Init 2 */
}
/**
* @brief TIM17 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM17_Init(void)
{
/* USER CODE BEGIN TIM17_Init 0 */
/* USER CODE END TIM17_Init 0 */
/* USER CODE BEGIN TIM17_Init 1 */
/* USER CODE END TIM17_Init 1 */
htim17.Instance = TIM17;
htim17.Init.Prescaler = 0;
htim17.Init.CounterMode = TIM_COUNTERMODE_UP;
htim17.Init.Period = 0;
htim17.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim17.Init.RepetitionCounter = 0;
htim17.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim17) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM17_Init 2 */
/* USER CODE END TIM17_Init 2 */
}
/**
* @brief USART2 Initialization Function
* @param None
......@@ -273,6 +760,7 @@ static void MX_GPIO_Init(void)
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
}
......@@ -302,7 +790,7 @@ void Error_Handler(void)
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(char *file, uint32_t line)
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
......
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c
浏览文件 @ 4ef35a9d
......@@ -97,6 +97,207 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
static uint32_t HAL_RCC_ADC_CLK_ENABLED=0;
/**
* @brief ADC MSP Initialization
* This function configures the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspInit 0 */
/* USER CODE END ADC1_MspInit 0 */
/* Peripheral clock enable */
HAL_RCC_ADC_CLK_ENABLED++;
if(HAL_RCC_ADC_CLK_ENABLED==1){
__HAL_RCC_ADC_CLK_ENABLE();
}
__HAL_RCC_GPIOC_CLK_ENABLE();
/**ADC1 GPIO Configuration
PC0 ------> ADC1_IN1
*/
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN ADC1_MspInit 1 */
/* USER CODE END ADC1_MspInit 1 */
}
else if(hadc->Instance==ADC2)
{
/* USER CODE BEGIN ADC2_MspInit 0 */
/* USER CODE END ADC2_MspInit 0 */
/* Peripheral clock enable */
HAL_RCC_ADC_CLK_ENABLED++;
if(HAL_RCC_ADC_CLK_ENABLED==1){
__HAL_RCC_ADC_CLK_ENABLE();
}
__HAL_RCC_GPIOC_CLK_ENABLE();
/**ADC2 GPIO Configuration
PC1 ------> ADC2_IN2
*/
GPIO_InitStruct.Pin = GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN ADC2_MspInit 1 */
/* USER CODE END ADC2_MspInit 1 */
}
else if(hadc->Instance==ADC3)
{
/* USER CODE BEGIN ADC3_MspInit 0 */
/* USER CODE END ADC3_MspInit 0 */
/* Peripheral clock enable */
HAL_RCC_ADC_CLK_ENABLED++;
if(HAL_RCC_ADC_CLK_ENABLED==1){
__HAL_RCC_ADC_CLK_ENABLE();
}
__HAL_RCC_GPIOC_CLK_ENABLE();
/**ADC3 GPIO Configuration
PC2 ------> ADC3_IN3
*/
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN ADC3_MspInit 1 */
/* USER CODE END ADC3_MspInit 1 */
}
}
/**
* @brief ADC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
HAL_RCC_ADC_CLK_ENABLED--;
if(HAL_RCC_ADC_CLK_ENABLED==0){
__HAL_RCC_ADC_CLK_DISABLE();
}
/**ADC1 GPIO Configuration
PC0 ------> ADC1_IN1
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
/* USER CODE BEGIN ADC1_MspDeInit 1 */
/* USER CODE END ADC1_MspDeInit 1 */
}
else if(hadc->Instance==ADC2)
{
/* USER CODE BEGIN ADC2_MspDeInit 0 */
/* USER CODE END ADC2_MspDeInit 0 */
/* Peripheral clock disable */
HAL_RCC_ADC_CLK_ENABLED--;
if(HAL_RCC_ADC_CLK_ENABLED==0){
__HAL_RCC_ADC_CLK_DISABLE();
}
/**ADC2 GPIO Configuration
PC1 ------> ADC2_IN2
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1);
/* USER CODE BEGIN ADC2_MspDeInit 1 */
/* USER CODE END ADC2_MspDeInit 1 */
}
else if(hadc->Instance==ADC3)
{
/* USER CODE BEGIN ADC3_MspDeInit 0 */
/* USER CODE END ADC3_MspDeInit 0 */
/* Peripheral clock disable */
HAL_RCC_ADC_CLK_ENABLED--;
if(HAL_RCC_ADC_CLK_ENABLED==0){
__HAL_RCC_ADC_CLK_DISABLE();
}
/**ADC3 GPIO Configuration
PC2 ------> ADC3_IN3
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
/* USER CODE BEGIN ADC3_MspDeInit 1 */
/* USER CODE END ADC3_MspDeInit 1 */
}
}
/**
* @brief LPTIM MSP Initialization
* This function configures the hardware resources used in this example
* @param hlptim: LPTIM handle pointer
* @retval None
*/
void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef* hlptim)
{
if(hlptim->Instance==LPTIM1)
{
/* USER CODE BEGIN LPTIM1_MspInit 0 */
/* USER CODE END LPTIM1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_LPTIM1_CLK_ENABLE();
/* USER CODE BEGIN LPTIM1_MspInit 1 */
/* USER CODE END LPTIM1_MspInit 1 */
}
}
/**
* @brief LPTIM MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hlptim: LPTIM handle pointer
* @retval None
*/
void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef* hlptim)
{
if(hlptim->Instance==LPTIM1)
{
/* USER CODE BEGIN LPTIM1_MspDeInit 0 */
/* USER CODE END LPTIM1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_LPTIM1_CLK_DISABLE();
/* USER CODE BEGIN LPTIM1_MspDeInit 1 */
/* USER CODE END LPTIM1_MspDeInit 1 */
}
}
/**
* @brief RTC MSP Initialization
* This function configures the hardware resources used in this example
......@@ -105,7 +306,6 @@ void HAL_MspInit(void)
*/
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspInit 0 */
......@@ -126,10 +326,8 @@ void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspDeInit 0 */
......@@ -144,6 +342,259 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspInit 0 */
/* USER CODE END SPI1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN SPI1_MspInit 1 */
/* USER CODE END SPI1_MspInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
/* USER CODE END SPI2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**SPI2 GPIO Configuration
PC3 ------> SPI2_MOSI
PB10 ------> SPI2_SCK
PB14 ------> SPI2_MISO
*/
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_14;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN SPI2_MspInit 1 */
/* USER CODE END SPI2_MspInit 1 */
}
else if(hspi->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspInit 0 */
/* USER CODE END SPI3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI3_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**SPI3 GPIO Configuration
PC10 ------> SPI3_SCK
PC11 ------> SPI3_MISO
PC12 ------> SPI3_MOSI
*/
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN SPI3_MspInit 1 */
/* USER CODE END SPI3_MspInit 1 */
}
}
/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */
/* USER CODE END SPI2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI2_CLK_DISABLE();
/**SPI2 GPIO Configuration
PC3 ------> SPI2_MOSI
PB10 ------> SPI2_SCK
PB14 ------> SPI2_MISO
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_14);
/* USER CODE BEGIN SPI2_MspDeInit 1 */
/* USER CODE END SPI2_MspDeInit 1 */
}
else if(hspi->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspDeInit 0 */
/* USER CODE END SPI3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI3_CLK_DISABLE();
/**SPI3 GPIO Configuration
PC10 ------> SPI3_SCK
PC11 ------> SPI3_MISO
PC12 ------> SPI3_MOSI
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
/* USER CODE BEGIN SPI3_MspDeInit 1 */
/* USER CODE END SPI3_MspDeInit 1 */
}
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM15)
{
/* USER CODE BEGIN TIM15_MspInit 0 */
/* USER CODE END TIM15_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM15_CLK_ENABLE();
/* USER CODE BEGIN TIM15_MspInit 1 */
/* USER CODE END TIM15_MspInit 1 */
}
else if(htim_base->Instance==TIM16)
{
/* USER CODE BEGIN TIM16_MspInit 0 */
/* USER CODE END TIM16_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM16_CLK_ENABLE();
/* USER CODE BEGIN TIM16_MspInit 1 */
/* USER CODE END TIM16_MspInit 1 */
}
else if(htim_base->Instance==TIM17)
{
/* USER CODE BEGIN TIM17_MspInit 0 */
/* USER CODE END TIM17_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM17_CLK_ENABLE();
/* USER CODE BEGIN TIM17_MspInit 1 */
/* USER CODE END TIM17_MspInit 1 */
}
}
/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM15)
{
/* USER CODE BEGIN TIM15_MspDeInit 0 */
/* USER CODE END TIM15_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM15_CLK_DISABLE();
/* USER CODE BEGIN TIM15_MspDeInit 1 */
/* USER CODE END TIM15_MspDeInit 1 */
}
else if(htim_base->Instance==TIM16)
{
/* USER CODE BEGIN TIM16_MspDeInit 0 */
/* USER CODE END TIM16_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM16_CLK_DISABLE();
/* USER CODE BEGIN TIM16_MspDeInit 1 */
/* USER CODE END TIM16_MspDeInit 1 */
}
else if(htim_base->Instance==TIM17)
{
/* USER CODE BEGIN TIM17_MspDeInit 0 */
/* USER CODE END TIM17_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM17_CLK_DISABLE();
/* USER CODE BEGIN TIM17_MspDeInit 1 */
/* USER CODE END TIM17_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
......@@ -152,7 +603,6 @@ void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART2)
{
......@@ -187,10 +637,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
......
bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_it.c
浏览文件 @ 4ef35a9d
......@@ -71,6 +71,7 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
/* USER CODE BEGIN EV */
/* USER CODE END EV */
......
bsp/stm32/stm32l476-st-nucleo/board/Kconfig
浏览文件 @ 4ef35a9d
......@@ -89,6 +89,93 @@ menu "On-chip Peripheral Drivers"
endif
endif
menuconfig BSP_USING_SPI
bool "Enable SPI BUS"
default n
select RT_USING_SPI
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Enable SPI1 BUS"
default n
config BSP_SPI1_TX_USING_DMA
bool "Enable SPI1 TX DMA"
depends on BSP_USING_SPI1
default n
config BSP_SPI1_RX_USING_DMA
bool "Enable SPI1 RX DMA"
depends on BSP_USING_SPI1
select BSP_SPI1_TX_USING_DMA
default n
config BSP_USING_SPI2
bool "Enable SPI2 BUS"
default n
config BSP_SPI2_TX_USING_DMA
bool "Enable SPI2 TX DMA"
depends on BSP_USING_SPI2
default n
config BSP_SPI2_RX_USING_DMA
bool "Enable SPI2 RX DMA"
depends on BSP_USING_SPI2
select BSP_SPI2_TX_USING_DMA
default n
config BSP_USING_SPI3
bool "Enable SPI3 BUS"
default n
config BSP_SPI3_TX_USING_DMA
bool "Enable SPI3 TX DMA"
depends on BSP_USING_SPI3
default n
config BSP_SPI3_RX_USING_DMA
bool "Enable SPI3 RX DMA"
depends on BSP_USING_SPI3
select BSP_SPI3_TX_USING_DMA
default n
endif
menuconfig BSP_USING_TIM
bool "Enable timer"
default n
select RT_USING_HWTIMER
if BSP_USING_TIM
config BSP_USING_TIM15
bool "Enable TIM15"
default n
config BSP_USING_TIM16
bool "Enable TIM16"
default n
config BSP_USING_TIM17
bool "Enable TIM17"
default n
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
default n
select RT_USING_ADC
if BSP_USING_ADC
config BSP_USING_ADC1
bool "Enable ADC1"
default n
config BSP_USING_ADC2
bool "Enable ADC2"
default n
config BSP_USING_ADC3
bool "Enable ADC3"
default n
endif
menuconfig BSP_USING_ONCHIP_RTC
bool "Enable RTC"
select RT_USING_RTC
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或