The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are
referenced by pointers. The pointers are initialized at startup by direct access
to the structure fields. This violates Qemu device model.

The patch makes the IRQs handling to use GPIO model.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ich9->pic and ich9->ioapic differ for the first 16 GSIs (because
ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to
IOAPIC only).  However, ich9->ioapic is never used for the first
16 GSIs, so the two vectors can be merged.
Reviewed-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make ich9_lpc_update_pic take care only of GSIs 0-15, and
ich9_lpc_update_apic take care only of GSIs 16-23.  Assert
that they are called with the correct GSI indices.
Reviewed-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An asserted pirq can be disabled and the corresponding GSIs
should then go down to 0.  However, because of the conditional in
ich9_lpc_update_by_pirq, the legacy 8259 pin could remain stuck to 1.
Reviewed-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ICH9 SMB bridge can be created using qdev API despite existence of helper
function. The type name is needed for such creation. Using a preprocessor
alias instead the string type name itself is preferable.

The patch makes the alias accessible through the header.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The port92 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The
pointer is never changed at runtime. Hence, common GPIO model can be applied
to A20 IRQ line. Note that checking for IRQ to be connected as in
previous version of code is not required qemu_set_irq will do it.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The pointer
is never changed at runtime. So common GPIO model can be applied to A20 IRQ
line. Note that checking for IRQ to be connected as in previous version
of code is not required because qemu_set_irq will do it.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, Q35 instance is configured using direct access to structure fields.
The patch uses property interface to set the fields.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

During creation of Q35 instance several parameters are set using direct access.
It violates Qemu device model. Correctly, the parameters should be handled as
object properties.

The patch adds four link type properties for fields:
mch.ram_memory
mch.pci_address_space
mch.system_memory
mch.address_space_io
And, it adds two size type properties for fields:
mch.below_4g_mem_size
mch.above_4g_mem_size
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

qdev API can be used to create CFI pflash devices despite existance of helper
functions. The type name is needed in course of such creation. Using the
preprocessor alias instead of the string literal itself is preferable.

The patch makes the aliases accessible through the header.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently vmport device is identified by the string literal. Using a
preprocessor alias instead is preferable.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The speaker device needs pointer to ISA PIT device to operate. But according to
qdev-properties.h, properties of pointer type should be avoided. It seems a
link type property is a good substitution.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The patch moves "hw/ide/achi.h", "hw/ide/pci.h" and "hw/ide/internal.h" headers
to corresponding folders inside "include" folder alike other Qemu headers.
Signed-off-by: NEfimov Vasily <real@ispras.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
  5803fce3 pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
  1. node by cpu index -> node by apic id
       i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
  2. apic id -> srat entry PMX
       PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
  1. numa_info[x].node_cpu -> PMX value using index
     in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.

That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.

While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

it adds HW and AML parts for CPU_Device._OST method
handling to allow OSPM reports status of hot-(un)plug
operation.
And extends QMP command query-acpi-ospm-status to report
CPU's OST info along with already reported PC-DIMM devices.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

it adds hw registers needed for handling CPU hot-remove and
corresponding AML methods to request and eject a CPU with
necessary hotplug callbacks in pc,piix4,ich9 code.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

it adds hw registers needed for handling CPU hot-add and
corresponding AML methods to handle hot-add events on
guest side.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.

Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

it adds CPU objects to DSDT with _STA method
and QEMU side of CPU hotplug interface initialization
with registers sufficient to handle _STA requests,
including necessary hotplug callbacks in piix4,ich9 code.

Hot-(un)plug hw/acpi parts will be added by
corresponding follow up patches.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It will be used to select which hotplug call-back is called
and for switching from legacy mode into new one.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The current code creates a whole page mmio region for the MSI-X table
size.

However, the page containing the MSI-X table may contain other registers
not related to MSI-X. Creating an mmio region for the whole page masks
such registers and may break drivers in the guest OS.

Since maximal number of entries is known, use that instead to deduce the
table size when setting up the mmio region.
Signed-off-by: NIdo Yariv <ido@wizery.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Function 6 is used to set Namespace Label Data
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Function 5 is used to get Namespace Label Data
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Function 4 is used to get Namespace label size
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently only revision 1 is supported
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It separates the operations between root device and nvdimm devices
in order to introducing label functions support for nvdimm device
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Check arg0 which indicates UUID to see if it is valid
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Check if the input Arg3 is valid then store it into ARG3 if it is
needed
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Now we pass HDLE to Qemu properly, use 0 for root device and use the
handle for nvdimm devices
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It will be used by NVDIMM ACPI
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Implement ObjectType which is used by NVDIMM _DSM method in
later patch
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Introduce a parameter, 'label-size', which is the size of nvdimm label
data area which is reserved at the end of backend memory. It is required
at least 128k

Two callbacks, read_label_data() and write_label_data(), are used to
operate the label area
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This callback returns the MemoryRegion that is the memory of dimm should
be kept during live migration

nvdimm device is different with pc-dimm as its memory includes not only
the MemoryRegion directly mapping to guest's address space but also the
memory used as label data
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Use the ACPI table construction tools to create an ACPI entry
for IPMI.  This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists.  It also adds a dummy function if IPMI
is not compiled in.

This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add an IPMI table entry to the SMBIOS.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This will let things in other files (like IPMI) build SMBIOS tables.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make attached property settable and turns off auto-attach in case the
device was hotplugged.  Hotplugging works simliar to usb-bot now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1465984019-28963-6-git-send-email-kraxel@redhat.com

This patch marks usb-bot as hot-pluggable device, makes attached
property settable and turns off auto-attach in case the device
was hotplugged.

Hot-plugging a usb-bot device with one or more scsi devices can be
done this way now:

  (1) device-add usb-bot,id=foo
  (2) device-add scsi-{hd,cd},bus=foo.0,lun=0
  (2b) optionally add more devices (luns 0 ... 15).
  (3) qom-set foo.attached = true
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1465984019-28963-5-git-send-email-kraxel@redhat.com

USB devices in attached state are visible to the guest.  This patch adds
a QOM property for this.  Write access is opt-in per device.  Some
devices manage attached state automatically (usb-host, usb-serial,
usb-redir), so we can't enable write access universally but have to do
it on a case by case base.  So far, no device opts in.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Message-id: 1465984019-28963-4-git-send-email-kraxel@redhat.com

[ minor codestyle fix ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>