- 03 4月, 2019 6 次提交
-
-
由 Peter Maydell 提交于
Fix taking address of fields in packed structs warnings by gcc 9 # gpg: Signature made Wed 03 Apr 2019 10:58:42 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20190403: hw/s390x/3270-ccw: avoid taking address of fields in packed struct hw/s390x/ipl: avoid taking address of fields in packed struct hw/s390/css: avoid taking address members in packed structs hw/vfio/ccw: avoid taking address members in packed structs Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrangé 提交于
Compiling with GCC 9 complains hw/s390x/3270-ccw.c: In function ‘emulated_ccw_3270_cb’: hw/s390x/3270-ccw.c:81:19: error: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 81 | SCSW *s = &sch->curr_status.scsw; | ^~~~~~~~~~~~~~~~~~~~~~ This local variable is only present to save a little bit of typing when setting the field later. Get rid of this to avoid the warning about unaligned accesses. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-15-berrange@redhat.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Daniel P. Berrangé 提交于
Compiling with GCC 9 complains hw/s390x/ipl.c: In function ‘s390_ipl_set_boot_menu’: hw/s390x/ipl.c:256:25: warning: taking address of packed member of ‘struct QemuIplParameters’ may result in an unaligned pointer value [-Waddress-of-packed-member] 256 | uint32_t *timeout = &ipl->qipl.boot_menu_timeout; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ This local variable is only present to save a little bit of typing when setting the field later. Get rid of this to avoid the warning about unaligned accesses. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-14-berrange@redhat.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NFarhan Ali <alifm@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Daniel P. Berrangé 提交于
The GCC 9 compiler complains about many places in s390 code that take the address of members of the 'struct SCHIB' which is marked packed: hw/s390x/css.c: In function ‘sch_handle_clear_func’: hw/s390x/css.c:698:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\ ue [-Waddress-of-packed-member] 698 | PMCW *p = &sch->curr_status.pmcw; | ^~~~~~~~~~~~~~~~~~~~~~ hw/s390x/css.c:699:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\ ue [-Waddress-of-packed-member] 699 | SCSW *s = &sch->curr_status.scsw; | ^~~~~~~~~~~~~~~~~~~~~~ ...snip many more... Almost all of these are just done for convenience to avoid typing out long variable/field names when referencing struct members. We can get most of this convenience by taking the address of the 'struct SCHIB' instead, avoiding triggering the compiler warnings. In a couple of places we copy via a local variable which is a technique already applied elsewhere in s390 code for this problem. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-13-berrange@redhat.com> Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NHalil Pasic <pasic@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Daniel P. Berrangé 提交于
The GCC 9 compiler complains about many places in s390 code that take the address of members of the 'struct SCHIB' which is marked packed: hw/vfio/ccw.c: In function ‘vfio_ccw_io_notifier_handler’: hw/vfio/ccw.c:133:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value \ [-Waddress-of-packed-member] 133 | SCSW *s = &sch->curr_status.scsw; | ^~~~~~~~~~~~~~~~~~~~~~ hw/vfio/ccw.c:134:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value \ [-Waddress-of-packed-member] 134 | PMCW *p = &sch->curr_status.pmcw; | ^~~~~~~~~~~~~~~~~~~~~~ ...snip many more... Almost all of these are just done for convenience to avoid typing out long variable/field names when referencing struct members. We can get most of this convenience by taking the address of the 'struct SCHIB' instead, avoiding triggering the compiler warnings. In a couple of places we copy via a local variable which is a technique already applied elsewhere in s390 code for this problem. Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-12-berrange@redhat.com> Reviewed-by: NEric Farman <farman@linux.ibm.com> Reviewed-by: NHalil Pasic <pasic@linux.ibm.com> Reviewed-by: NFarhan Ali <alifm@linux.ibm.com> Signed-off-by: NCornelia Huck <cohuck@redhat.com>
-
由 Peter Maydell 提交于
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 02 4月, 2019 28 次提交
-
-
由 Peter Maydell 提交于
Miscellaneous patches for 2019-04-02 # gpg: Signature made Tue 02 Apr 2019 12:54:27 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2019-04-02: accel: Unbreak accelerator fallback vl: Document dependencies hiding in global and compat props migration: Support adding migration blockers earlier Revert "migration: move only_migratable to MigrationState" Revert "vl: Fix to create migration object before block backends again" qapi/migration.json: Rename COLOStatus last_mode to last-mode qapi/migration.json: Fix ColoStatus member last_mode's version vl: Fix error location of positional arguments Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
filemon: various fixes / improvements to file monitor for USB MTP Ensure watch IDs unique within a monitor and avoid integer wraparound issues when many watches are set & unset over time. # gpg: Signature made Tue 02 Apr 2019 13:53:40 BST # gpg: using RSA key BE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/filemon-next-pull-request: filemon: fix watch IDs to avoid potential wraparound issues filemon: ensure watch IDs are unique to QFileMonitor scope tests: refactor file monitor test to make it more understandable Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block layer patches: - file-posix: Ignore unlock failure instead of crashing - gluster: Limit the transfer size to 512 MiB - stream: Fix backing chain freezing - qemu-img: Enable BDRV_REQ_MAY_UNMAP for zero writes in convert - iotests fixes # gpg: Signature made Tue 02 Apr 2019 13:47:43 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: tests/qemu-iotests/235: Allow fallback to tcg block: test block-stream with a base node that is used by block-commit block: freeze the backing chain earlier in stream_start() block: continue until base is found in bdrv_freeze_backing_chain() et al block/file-posix: do not fail on unlock bytes tests/qemu-iotests: Remove redundant COPYING file block/gluster: limit the transfer size to 512 MiB qemu-img: Enable BDRV_REQ_MAY_UNMAP in convert iotests: Fix test 200 on s390x without virtio-pci Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrangé 提交于
Watch IDs are allocated from incrementing a int counter against the QFileMonitor object. In very long life QEMU processes with a huge amount of USB MTP activity creating & deleting directories it is just about conceivable that the int counter can wrap around. This would result in incorrect behaviour of the file monitor watch APIs due to clashing watch IDs. Instead of trying to detect this situation, this patch changes the way watch IDs are allocated. It is turned into an int64_t variable where the high 32 bits are set from the underlying inotify "int" ID. This gives an ID that is guaranteed unique for the directory as a whole, and we can rely on the kernel to enforce this. QFileMonitor then sets the low 32 bits from a per-directory counter. The USB MTP device only sets watches on the directory as a whole, not files within, so there is no risk of guest triggered wrap around on the low 32 bits. Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The watch IDs are mistakenly only unique within the scope of the directory being monitored. This is not useful for clients which are monitoring multiple directories. They require watch IDs to be unique globally within the QFileMonitor scope. Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Tested-by: NBandan Das <bsd@redhat.com> Reviewed-by: NBandan Das <bsd@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Daniel P. Berrangé 提交于
The current file monitor unit tests are too clever for their own good making it hard to understand the desired output. Instead of trying to infer the expected events, explicitly list the events we expect in the operation sequence. Instead of dynamically building a matrix of tests, just have one giant operation sequence that validates all scenarios in a single test. Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Markus Armbruster 提交于
When the user specifies a list of accelerators, we pick the first one that initializes successfully. Recent commit 1a3ec8c1 broke that. Reproducer: $ qemu-system-x86_64 --machine accel=xen:tcg xencall: error: Could not obtain handle on privileged command interface: No such file or directory xen be core: xen be core: can't open xen interface can't open xen interface qemu-system-x86_64: failed to initialize Xen: Operation not permitted qemu-system-x86_64: /home/armbru/work/qemu/qom/object.c:436: object_set_accelerator_compat_props: Assertion `!object_compat_props[0]' failed. Root cause: we register accelerator compat properties even when the accelerator fails. The failed assertion is object_set_accelerator_compat_props() telling us off. Fix by calling it only for the accelerator that succeeded. Fixes: 1a3ec8c1Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20190401090827.20793-6-armbru@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190401090827.20793-5-armbru@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Markus Armbruster 提交于
migrate_add_blocker() asserts we have a current_migration object, in migrate_get_current(). We do only after migration_object_init(). This contributes to the following dependency cycle: * configure_blockdev() must run before machine_set_property() so machine properties can refer to block backends * machine_set_property() before configure_accelerator() so machine properties like kvm-irqchip get applied * configure_accelerator() before migration_object_init() so that Xen's accelerator compat properties get applied. * migration_object_init() before configure_blockdev() so configure_blockdev() can add migration blockers The cycle was closed when recent commit cda4aa9a "Create block backends before setting machine properties" added the first dependency, and satisfied it by violating the last one. Broke block backends that add migration blockers, as demonstrated by qemu-iotests 055. To fix it, break the last dependency: make migrate_add_blocker() usable before migration_object_init(). The previous commit already removed the use of migrate_get_current() from migrate_add_blocker() itself. Didn't quite do the trick, as there's another one hiding in migration_is_idle(). The use there isn't actually necessary: when no migration object has been created yet, migration is surely idle. Make migration_is_idle() return true then. Fixes: cda4aa9aSigned-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190401090827.20793-4-armbru@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Markus Armbruster 提交于
This reverts commit 3df663e5. This reverts commit b605c47b. Command line option --only-migratable is for disallowing any configuration that can block migration. Initially, --only-migratable set global variable @only_migratable. Commit 3df663e5 "migration: move only_migratable to MigrationState" replaced it by MigrationState member @only_migratable. That was a mistake. First, it doesn't make sense on the design level. MigrationState captures the state of an individual migration, but --only-migratable isn't a property of an individual migration, it's a restriction on QEMU configuration. With fault tolerance, we could have several migrations at once. --only-migratable would certainly protect all of them. Storing it in MigrationState feels inappropriate. Second, it contributes to a dependency cycle that manifests itself as a bug now. Putting @only_migratable into MigrationState means its available only after migration_object_init(). We can't set it before migration_object_init(), so we delay setting it with a global property (this is fixup commit b605c47b "migration: fix handling for --only-migratable"). We can't get it before migration_object_init(), so anything that uses it can only run afterwards. Since migrate_add_blocker() needs to obey --only-migratable, any code adding migration blockers can run only afterwards. This contributes to the following dependency cycle: * configure_blockdev() must run before machine_set_property() so machine properties can refer to block backends * machine_set_property() before configure_accelerator() so machine properties like kvm-irqchip get applied * configure_accelerator() before migration_object_init() so that Xen's accelerator compat properties get applied. * migration_object_init() before configure_blockdev() so configure_blockdev() can add migration blockers The cycle was closed when recent commit cda4aa9a "Create block backends before setting machine properties" added the first dependency, and satisfied it by violating the last one. Broke block backends that add migration blockers. Moving @only_migratable into MigrationState was a mistake. Revert it. This doesn't quite break the "migration_object_init() before configure_blockdev() dependency, since migrate_add_blocker() still has another dependency on migration_object_init(). To be addressed the next commit. Note that the reverted commit made -only-migratable sugar for -global migration.only-migratable=on below the hood. Documentation has only ever mentioned -only-migratable. This commit removes the arcane & undocumented alternative to -only-migratable again. Nobody should be using it. Conflicts: include/migration/misc.h migration/migration.c migration/migration.h vl.c Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190401090827.20793-3-armbru@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Markus Armbruster 提交于
This reverts commit e60483f2. Recent commit cda4aa9a moved block backend creation before machine property evaluation. This broke block backends registering migration blockers. Commit e60483f2 fixed it by moving migration object creation before block backend creation. This broke migration with Xen. Turns out we need to configure the accelerator before we create the migration object so that Xen's accelerator compat properties get applied. Revert the flawed commit. This fixes the Xen regression, but brings back the block backend regression. The next commits will fix it again. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190401090827.20793-2-armbru@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Zhang Chen 提交于
Signed-off-by: NZhang Chen <chen.zhang@intel.com> Message-Id: <20190402085521.17973-1-chen.zhang@intel.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> [Commit message rephrased] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Zhang Chen 提交于
Signed-off-by: NZhang Chen <chen.zhang@intel.com> Message-Id: <20190326174510.13303-1-chen.zhang@intel.com> Reviewed-by: NEric Blake <eblake@redhat.com> [Commit message tweaked as per Eric's review] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Markus Armbruster 提交于
We blame badness in positional arguments on the last option argument: $ qemu-system-x86_64 -vnc :1 bad.img qemu-system-x86_64: -vnc :1: Could not open 'foo': No such file or directory I believe we've done this ever since we reported locations. Fix it to qemu-system-x86_64: bad.img: Could not open 'bad.img': No such file or directory Reported-by: NDaniel P. Berrangé <berrange@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190318183312.4684-1-armbru@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
-
由 Thomas Huth 提交于
iotest 235 currently only works with KVM - this is bad for systems where it is not available, e.g. CI pipelines. The test also works when using "tcg" as accelerator, so we can simply add that to the list of accelerators, too. Signed-off-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alberto Garcia 提交于
The base node of a block-stream operation indicates the first image from the backing chain starting from which no data is copied to the top node. The block-stream job allows others to use that base image, so a second block-stream job could be writing to it at the same time. An important restriction is that the base image must not disappear while the stream job is ongoing. stream_start() freezes the backing chain from top to base with that purpose but it does it too late in the code so there is a race condition there. This bug was fixed in the previous commit, and this patch contains an iotest for this scenario. Signed-off-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alberto Garcia 提交于
Commit 65854933 added code to freeze the backing chain from 'top' to 'base' for the duration of the block-stream job. The problem is that the freezing happens too late in stream_start(): during the bdrv_reopen_set_read_only() call earlier in that function another job can jump in and remove the base image. If that happens we have an invalid chain and QEMU crashes. This patch puts the bdrv_freeze_backing_chain() call at the beginning of the function. Signed-off-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Alberto Garcia 提交于
All three functions that handle the BdrvChild.frozen attribute walk the backing chain from 'bs' to 'base' and stop either when 'base' is found or at the end of the chain if 'base' is NULL. However if 'base' is not found then the functions return without errors as if it was NULL. This is wrong: if the caller passed an incorrect parameter that means that there is a bug in the code. Signed-off-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
bdrv_replace_child() calls bdrv_check_perm() with error_abort on loosening permissions. However file-locking operations may fail even in this case, for example on NFS. And this leads to Qemu crash. Let's avoid such errors. Note, that we ignore such things anyway on permission update commit and abort. Signed-off-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Thomas Huth 提交于
The file tests/qemu-iotests/COPYING is the same text as in the COPYING file in the main directory. So as far as I can see, we don't need the duplicate here. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefano Garzarella 提交于
Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size is greater or equal to 1024 MiB, so we are limiting the transfer size to 512 MiB to avoid this rare issue. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1691320Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Reviewed-by: NNiels de Vos <ndevos@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Nir Soffer 提交于
With Kevin's "block: Fix slow pre-zeroing in qemu-img convert"[1] (commit c9fdcf20, 'qemu-img: Use BDRV_REQ_NO_FALLBACK for pre-zeroing') we skip the pre zero step called like this: blk_make_zero(s->target, BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) And we write zeroes later using: blk_co_pwrite_zeroes(s->target, sector_num << BDRV_SECTOR_BITS, n << BDRV_SECTOR_BITS, 0); Since we use flags=0, this is translated to NBD_CMD_WRITE_ZEROES with NBD_CMD_FLAG_NO_HOLE flag, which cause the NBD server to allocated space instead of punching a hole. Here is an example failure: $ dd if=/dev/urandom of=src.img bs=1M count=5 $ truncate -s 50m src.img $ truncate -s 50m dst.img $ nbdkit -f -v -e '' -U nbd.sock file file=dst.img $ ./qemu-img convert -n src.img nbd:unix:nbd.sock We can see in nbdkit log that it received the NBD_CMD_FLAG_NO_HOLE (may_trim=0): nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d nbdkit: file[1]: debug: pwrite count=2097152 offset=0 nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152 nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304 nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=0 nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=0 nbdkit: file[1]: debug: flush And the image became fully allocated: $ qemu-img info dst.img virtual size: 50M (52428800 bytes) disk size: 50M With this change we see that nbdkit did not receive the NBD_CMD_FLAG_NO_HOLE (may_trim=1): nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d nbdkit: file[1]: debug: pwrite count=2097152 offset=0 nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152 nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304 nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=1 nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=1 nbdkit: file[1]: debug: flush And the file is sparse as expected: $ qemu-img info dst.img virtual size: 50M (52428800 bytes) disk size: 5.0M [1] http://lists.nongnu.org/archive/html/qemu-block/2019-03/msg00761.htmlSigned-off-by: NNir Soffer <nsoffer@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Thomas Huth 提交于
virtio-pci is optional on s390x, e.g. in downstream RHEL builds, it is disabled. On s390x, virtio-ccw should be used instead. Other tests like 051 or 240 already use virtio-scsi-ccw instead of virtio-scsi-pci on s390x, so let's do the same here and always use virtio-scsi-ccw on s390x. Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Peter Maydell 提交于
fixes for 4.0 (audio, usb), # gpg: Signature made Tue 02 Apr 2019 07:46:22 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/fixes-20190402-pull-request: audio: fix audio timer rate conversion bug usb-mtp: remove usb_mtp_object_free_one usb-mtp: fix return status of delete hw/usb/bus.c: Handle "no speed matched" case in usb_mask_to_str() Revert "audio: fix pc speaker init" Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Volker Rümelin 提交于
Currently the default audio timer frequency is 10000Hz instead of a period of 10000us. Also the audiodev timer-period property gets converted like a frequency. Only handling of the legacy QEMU_AUDIO_TIMER_PERIOD environment variable is correct because it's actually a frequency. With this patch the property timer-period is really a timer period and QEMU_AUDIO_TIMER_PERIOD remains a frequency. Fixes: 71830221 "-audiodev command line option basic implementation." Signed-off-by: NVolker Rümelin <vr_qemu@t-online.de> Reviewed-by: NZoltán Kővágó <DirtY.iCE.hu@gmail.com> Message-id: 90b95e4f-39ef-2b01-da6a-857ebaee1ec5@t-online.de Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Bandan Das 提交于
This function is used in the delete path only and can be replaced by a call to usb_mtp_object_free. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NBandan Das <bsd@redhat.com> Message-Id: <20190401211712.19012-3-bsd@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Bandan Das 提交于
Spotted by Coverity: CID 1399414 mtp delete allows the return status of delete succeeded, partial_delete or readonly - when none of the objects could be deleted. Give more meaningful names to return values of the delete function. Some initiators recurse over the objects themselves. In that case, only READ_ONLY can be returned. Signed-off-by: NBandan Das <bsd@redhat.com> Message-Id: <20190401211712.19012-2-bsd@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Peter Maydell 提交于
nbd patches for 2019-04-01 - Better behavior of qemu-img map on NBD images - Fixes for NBD protocol alignment corner cases: - the server has fewer places where it sends reads or block status not aligned to its advertised block size - the client has more cases where it can work around server non-compliance present in qemu 3.1 - the client now avoids non-compliant requests when interoperating with nbdkit or other servers not advertising block size # gpg: Signature made Mon 01 Apr 2019 15:06:54 BST # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2019-04-01: nbd/client: Trace server noncompliance on structured reads nbd/server: Advertise actual minimum block size block: Add bdrv_get_request_alignment() nbd/client: Support qemu-img convert from unaligned size nbd/client: Reject inaccessible tail of inconsistent server nbd/client: Report offsets in bdrv_block_status nbd/client: Lower min_block for block-status, unaligned size iotests: Add 241 to test NBD on unaligned images nbd-client: Work around server BLOCK_STATUS misalignment at EOF qemu-img: Gracefully shutdown when map can't finish nbd: Permit simple error to NBD_CMD_BLOCK_STATUS nbd: Don't lose server's error to NBD_CMD_BLOCK_STATUS nbd: Tolerate some server non-compliance in NBD_CMD_BLOCK_STATUS qemu-img: Report bdrv_block_status failures Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 01 4月, 2019 6 次提交
-
-
由 Eric Blake 提交于
Just as we recently added a trace for a server sending block status that doesn't match the server's advertised minimum block alignment, let's do the same for read chunks. But since qemu 3.1 is such a server (because it advertised 512-byte alignment, but when serving a file that ends in data but is not sector-aligned, NBD_CMD_READ would detect a mid-sector change between data and hole at EOF and the resulting read chunks are unaligned), we don't want to change our behavior of otherwise tolerating unaligned reads. Note that even though we fixed the server for 4.0 to advertise an actual block alignment (which gets rid of the unaligned reads at EOF for posix files), we can still trigger it via other means: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file Arguably, that is a bug in the blkdebug block status function, for leaking a block status that is not aligned. It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <20190330165349.32256-1-eblake@redhat.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-
由 Eric Blake 提交于
Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their reply according to bdrv_block_status() boundaries. If the block device has a request_alignment smaller than 512, but we advertise a block alignment of 512 to the client, then this can result in the server reply violating client expectations by reporting a smaller region of the export than what the client is permitted to address (although this is less of an issue for qemu 4.0 clients, given recent client patches to overlook our non-compliance at EOF). Since it's always better to be strict in what we send, it is worth advertising the actual minimum block limit rather than blindly rounding it up to 512. Note that this patch is not foolproof - it is still possible to provoke non-compliant server behavior using: $ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file That is arguably a bug in the blkdebug driver (it should never pass back block status smaller than its alignment, even if it has to make multiple bdrv_get_status calls and determine the least-common-denominator status among the group to return). It may also be possible to observe issues with a backing layer with smaller alignment than the active layer, although so far I have been unable to write a reliable iotest for that scenario (but again, an issue like that could be argued to be a bug in the block layer, or something where we need a flag to bdrv_block_status() to state whether the result must be aligned to the current layer's limits or can be subdivided for accuracy when chasing backing files). Anyways, as blkdebug is not normally used, and as this patch makes our server more interoperable with qemu 3.1 clients, it is worth applying now, even while we still work on a larger patch series for the 4.1 timeframe to have byte-accurate file lengths. Note that the iotests output changes - for 223 and 233, we can see the server's better granularity advertisement; and for 241, the three test cases have the following effects: - natural alignment: the server's smaller alignment is now advertised, and the hole reported at EOF is now the right result; we've gotten rid of the server's non-compliance - forced server alignment: the server still advertises 512 bytes, but still sends a mid-sector hole. This is still a server compliance bug, which needs to be fixed in the block layer in a later patch; output does not change because the client is already being tolerant of the non-compliance - forced client alignment: the server's smaller alignment means that the client now sees the server's status change mid-sector without any protocol violations, but the fact that the map shows an unaligned mid-sector hole is evidence of the block layer problems with aligned block status, to be fixed in a later patch Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-7-eblake@redhat.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [eblake: rebase to enhanced iotest 241 coverage]
-
由 Eric Blake 提交于
The next patch needs access to a device's minimum permitted alignment, since NBD wants to advertise this to clients. Add an accessor function, borrowing from blk_get_max_transfer() for accessing a backend's block limits. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20190329042750.14704-6-eblake@redhat.com>
-
由 Eric Blake 提交于
If an NBD server advertises a size that is not a multiple of a sector, the block layer rounds up that size, even though we set info.size to the exact byte value sent by the server. The block layer then proceeds to let us read or query block status on the hole that it added past EOF, which the NBD server is unlikely to be happy with. Fortunately, qemu as a server never advertizes an unaligned size, so we generally don't run into this problem; but the nbdkit server makes it easy to test: $ printf %1000d 1 > f1 $ ~/nbdkit/nbdkit -fv file f1 & pid=$! $ qemu-img convert -f raw nbd://localhost:10809 f2 $ kill $pid $ qemu-img compare f1 f2 Pre-patch, the server attempts a 1024-byte read, which nbdkit rightfully rejects as going beyond its advertised 1000 byte size; the conversion fails and the output files differ (not even the first sector is copied, because qemu-img does not follow ddrescue's habit of trying smaller reads to get as much information as possible in spite of errors). Post-patch, the client's attempts to read (and query block status, for new enough nbdkit) are properly truncated to the server's length, with sane handling of the hole the block layer forced on us. Although f2 ends up as a larger file (1024 bytes instead of 1000), qemu-img compare shows the two images to have identical contents for display to the guest. I didn't add iotests coverage since I didn't want to add a dependency on nbdkit in iotests. I also did NOT patch write, trim, or write zeroes - these commands continue to fail (usually with ENOSPC, but whatever the server chose), because we really can't write to the end of the file, and because 'qemu-img convert' is the most common case where we care about being tolerant (which is read-only). Perhaps we could truncate the request if the client is writing zeros to the tail, but that seems like more work, especially if the block layer is fixed in 4.1 to track byte-accurate sizing (in which case this patch would be reverted as unnecessary). Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <20190329042750.14704-5-eblake@redhat.com> Tested-by: NRichard W.M. Jones <rjones@redhat.com>
-
由 Eric Blake 提交于
The NBD spec suggests that a server should never advertise a size inconsistent with its minimum block alignment, as that tail is effectively inaccessible to a compliant client obeying those block constraints. Since we have a habit of rounding up rather than truncating, to avoid losing the last few bytes of user input, and we cannot access the tail when the server advertises bogus block sizing, abort the connection to alert the server to fix their bug. And rejecting such servers matches what we already did for a min_block that was not a power of 2 or which was larger than max_block. Does not impact either qemu (which always sends properly aligned sizes) or nbdkit (which does not send minimum block requirements yet); so this is mostly aimed at new NBD server implementations, and ensures that the rest of our code can assume the size is aligned. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <20190330155704.24191-1-eblake@redhat.com> Reviewed-by: NVladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-
由 Peter Maydell 提交于
In usb_mask_to_str() we convert a mask of USB speeds into a human-readable string (like "full+high") for use in tracing and error messages. However the conversion code doesn't do anything to the string buffer if the passed in speedmask doesn't match any of the recognized speeds, which means that the tracing and error messages will end up with random garbage in them. This can happen if we're doing USB device passthrough. Handle the "unrecognized speed" case by using the string "unknown". Fixes: https://bugs.launchpad.net/qemu/+bug/1603785Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20190328133503.6490-1-peter.maydell@linaro.org Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-