qmp_add_fd() gets an fd that was received over a socket with
SCM_RIGHTS and adds it to an fd set.  This patch adds support
that will enable adding an fd that was inherited on the
command line to an fd set.

Note: All of the code added to monitor_fdset_add_fd(), with the
exception of the error path for non-valid fdset-id, is code motion
from qmp_add_fd().
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The first call to add an fd to an fd set was previously not
allowed to choose the fd set ID.  The ID was generated as
the first available and ensuing calls could add more fds by
specifying the fd set ID.  This change allows users to
choose the fd set ID on the first call.
Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKashyap Chamarthy <kashyap.cv@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The qemu-img info --backing-chain option enumerates the backing file
chain.  For example, for base.qcow2 <- snap1.qcow2 <- snap2.qcow2 the
output becomes:

  $ qemu-img info --backing-chain snap2.qcow2
  image: snap2.qcow2
  file format: qcow2
  virtual size: 100M (104857600 bytes)
  disk size: 196K
  cluster_size: 65536
  backing file: snap1.qcow2
  backing file format: qcow2

  image: snap1.qcow2
  file format: qcow2
  virtual size: 100M (104857600 bytes)
  disk size: 196K
  cluster_size: 65536
  backing file: base.qcow2
  backing file format: qcow2

  image: base.qcow2
  file format: qcow2
  virtual size: 100M (104857600 bytes)
  disk size: 136K
  cluster_size: 65536
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This simplifies some code and error checking, and also fixes a bug.

bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain.  In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.

Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently, bdrv_find_backing_image compares bs->backing_file with
what is passed in as a backing_file name.  Mismatches may occur,
however, when bs->backing_file and backing_file are not both
absolute or relative.

Use path_combine() to make sure any relative backing filenames are
relative to the current image filename being searched, and then use
realpath() to make all comparisons based on absolute filenames.

If either backing_file or bs->backing_file is determine to be a
protocol, then no filename normalization is performed.

This also changes bdrv_find_backing_image to no longer be recursive,
but iterative.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch allows an empty filename to be passed as the new base image name
for qemu-img rebase to mean base the image on no backing file (i.e.
independent of any backing file). According to Eric Blake, qemu-img rebase
already supports this when '-u' is used; this adds support when -u is not
used.
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In QEMUMonitorProtocol, commit e9d17b68 removed the __sockfile creation
from __negotiate_capabilities(), which breaks _accept().  This causes
failures in qemu-io python based tests (i.e. tests 030 and 040).

This patch creates the sockfile in __accept() as well.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qemu-kvm/memory/urgent:
  memory: abort if a memory region is destroyed during a transaction
  i440fx: avoid destroying memory regions within a transaction
  memory: Make eventfd adhere to device endianness

* awilliam/tags/vfio-pci-for-qemu-20121017.0:
  vfio-pci: Mark non-migratable
  vfio-pci: Fix debug build

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add multiport serial card implementation, with two variants, one
featuring two and one featuring four ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So we get a hot-pluggable 16550 uart.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Split serial.c into serial.c, serial.h and serial-isa.c.  While being at
creating a serial.h header file move the serial prototypes from pc.h to
the new serial.h.  The latter leads to s/pc.h/serial.h/ in tons of
boards which just want the serial bits from pc.h
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This makes it possible for QEMU to use transparent huge pages (THP)
when transparent_hugepage/enabled=madvise. Otherwise THP is only
used when it's enabled system wide.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* quintela/migration-next-20121017: (41 commits)
  cpus: create qemu_in_vcpu_thread()
  savevm: make qemu_file_put_notify() return errors
  savevm: un-export qemu_file_set_error()
  block-migration: handle errors with the return codes correctly
  block-migration:  Switch meaning of return value
  block-migration: make flush_blks() return errors
  buffered_file: buffered_put_buffer() don't need to set last_error
  savevm: Only qemu_fflush() can generate errors
  savevm: make qemu_fill_buffer() be consistent
  savevm: unexport qemu_ftell()
  savevm: unfold qemu_fclose_internal()
  savevm: make qemu_fflush() return an error code
  savevm: Remove qemu_fseek()
  virtio-net: use qemu_get_buffer() in a temp buffer
  savevm: unexport qemu_fflush
  migration: make migrate_fd_wait_for_unfreeze() return errors
  buffered_file: make buffered_flush return the error code
  buffered_file: callers of buffered_flush() already check for errors
  buffered_file: We can access directly to bandwidth_limit
  buffered_file: unfold migrate_fd_close
  ...

* qemu-kvm/memory/dma: (23 commits)
  pci: honor PCI_COMMAND_MASTER
  pci: give each device its own address space
  memory: add address_space_destroy()
  dma: make dma access its own address space
  memory: per-AddressSpace dispatch
  s390: avoid reaching into memory core internals
  memory: use AddressSpace for MemoryListener filtering
  memory: move tcg flush into a tcg memory listener
  memory: move address_space_memory and address_space_io out of memory core
  memory: manage coalesced mmio via a MemoryListener
  xen: drop no-op MemoryListener callbacks
  kvm: drop no-op MemoryListener callbacks
  xen_pt: drop no-op MemoryListener callbacks
  vfio: drop no-op MemoryListener callbacks
  memory: drop no-op MemoryListener callbacks
  memory: provide defaults for MemoryListener operations
  memory: maintain a list of address spaces
  memory: export AddressSpace
  memory: prepare AddressSpace for exporting
  xen_pt: use separate MemoryListeners for memory and I/O
  ...

Currently we ignore PCI_COMMAND_MASTER completely: DMA succeeds even when
the bit is clear.

Honor PCI_COMMAND_MASTER by inserting a memory region into the device's
bus master address space, and tying its enable status to PCI_COMMAND_MASTER.

Tested using

  setpci -s 03 COMMAND=3

while a ping was running on a NIC in slot 3.  The kernel (Linux) detected
the stall and recovered after the command

  setpci -s 03 COMMAND=7

was issued.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Accesses from different devices can resolve differently
(depending on bridge settings, iommus, and PCI_COMMAND_MASTER), so
set up an address space for each device.

Currently iommus are expressed outside the memory API, so this doesn't
work if an iommu is present.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since address spaces can be created dynamically by device hotplug, they
can also be destroyed dynamically.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of accessing the cpu address space, use an address space
configured by the caller.

Eventually all dma functionality will be folded into AddressSpace,
but we have to start from something.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we use a global radix tree to dispatch memory access.  This only
works with a single address space; to support multiple address spaces we
make the radix tree a member of AddressSpace (via an intermediate structure
AddressSpaceDispatch to avoid exposing too many internals).

A side effect is that address_space_io also gains a dispatch table.  When
we remove all the pre-memory-API I/O registrations, we can use that for
dispatching I/O and get rid of the original I/O dispatch.
Signed-off-by: NAvi Kivity <avi@redhat.com>

use cpu_physical_memory_is_io() instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Using the AddressSpace type reduces confusion, as you can't accidentally
supply the MemoryRegion you're interested in.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We plan to make the core listener listen to all address spaces; this
will cause many more flushes than necessary.  Prepare for that by
moving the flush into a tcg-specific listener.

Later we can avoid registering the listener if tcg is disabled.
Signed-off-by: NAvi Kivity <avi@redhat.com>

With this change, memory.c no longer knows anything about special address
spaces, so it is prepared for AddressSpace based DMA.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of calling a global function on coalesced mmio changes, which
routes the call to kvm if enabled, add coalesced mmio hooks to
MemoryListener and make kvm use that instead.

The motivation is support for multiple address spaces (which means we
we need to filter the call on the right address space) but the result
is cleaner as well.
Signed-off-by: NAvi Kivity <avi@redhat.com>

commit 38f419f3 fixed a breakage with CONFIG_QEMU_HELPERDIR
which has been introduced by 8bf188aa.  But while techinically
that fix has been correct, all other similar variables are handled
differently.  Make it consistent, and let scripts/create_config
expand and capitalize the variable properly like for all other
qemu_*dir variables.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Like the MOVr instruction, the FMOVr instruction has the condition
encoded between bits 10 and 12.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use LOG_GUEST_ERROR rather than hw_error or direct fprintf.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use LOG_UNIMP and LOG_GUEST_ERROR where appropriate rather
than hw_error().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>