The "Rx timeout" (aka. Character Timeout Indication) has no separate mask
bit in the IER register and according to the specs reading RHR is the only
way to reset the irq.  However on the hardware (tested on OMAP2 UART which
is an extended 16550A) the RHR_IT bit in IER disables the irc, too.  Linux
bluetooth serial dongle driver for N800 depends on this behavior.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5239 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5238 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5237 c046a42c-6fe2-441c-8c8c-71466251a162

Replace gen_arith3 generic macro and dyngen ops by instruction specific
optimized TCG code.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5236 c046a42c-6fe2-441c-8c8c-71466251a162

Replace gen_arith2 generic macro and dyngon ops by instruction specific
optimized TCG code.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5235 c046a42c-6fe2-441c-8c8c-71466251a162

With this container_of can actually be used without causing build errors.
Reformat container_of.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162

The protocol_name "file" was added to the block driver when async IO was
introduced.  This can be used to select that a file is treated as a raw
device instead of probing for the type.  However, protocols are not subject
to path interpretation which cases qcow2 images with raw base images to not
function is the path was specified relatively.

The fix is simply to remove the protocol_name from the raw block driver.  The
proper way to force the use of a raw block format is to use the format= option
with -drive.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5233 c046a42c-6fe2-441c-8c8c-71466251a162

Should prevent the ugly wrapping due to a typo in an earlier commit.
Fix by Gregor (gg@seh.de).


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5232 c046a42c-6fe2-441c-8c8c-71466251a162

My previous commit broke the build.  This was spotted by C.W. Betts.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5231 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5230 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5229 c046a42c-6fe2-441c-8c8c-71466251a162

handle different areas in different ways. This schema works with qemu
too, so it appears to be the common ground.

This patch proposes using this common ground for everyone, by spliting
raw qemu.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5228 c046a42c-6fe2-441c-8c8c-71466251a162

On some cases, such as under KVM, tb_invalidate_phys_page_range()
may be called for large addresses, when qemu is configured to more than
4GB of RAM.

On these cases, qemu was crashing because it was using an index too
large for l1_map[], that supports only 32-bit addresses when compiling
without CONFIG_USER_ONLY.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5227 c046a42c-6fe2-441c-8c8c-71466251a162

Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the
code.  It's ugly and causes us to have to build multiple object files for
linking against qemu and the tools.

This patch introduces a new file, qemu-tool.c which contains enough for
qemu-img, qemu-nbd, and QEMU to all share the same objects.

This also required getting qemu-nbd to be a bit more Windows friendly.  I also
changed the Windows block-raw to use normal IO instead of overlapping IO since
we don't actually do AIO yet on Windows.  I changed the various #if 0's to
 #if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows.

After this patch, there are no longer any #ifdef's related to qemu-img and
qemu-nbd.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5225 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds check for all SH4 instructions which are
executed only in privileged mode.

(Shin-ichiro KAWASAKI)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5224 c046a42c-6fe2-441c-8c8c-71466251a162

(Michael Trimarchi)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5223 c046a42c-6fe2-441c-8c8c-71466251a162

Fix setting of cpu_model_str for sh4

(Michael Trimarchi)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5222 c046a42c-6fe2-441c-8c8c-71466251a162

Add receive character feature to SH4 SCIF.
SH4-SCI feature implementation work is left.

(Shin-ichiro KAWASAKI)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5221 c046a42c-6fe2-441c-8c8c-71466251a162

fix a bug on 'sleep' instruction, which have caused halt of idle task.
As i386 'hlt' instruction does, it should save PC before sleep.

(Shin-ichiro KAWASAKI)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5220 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5219 c046a42c-6fe2-441c-8c8c-71466251a162

Replace op_andi_... with tcg_gen_andi_tl.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5218 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce TCG variables cpu_{ctr,lr} and replace op_{load,store}_{lr,ctr}
with tcg_gen_mov_tl.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5217 c046a42c-6fe2-441c-8c8c-71466251a162

This patch creates tests/alpha directory and adds an "hello world"
program as well as two tests.
Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5216 c046a42c-6fe2-441c-8c8c-71466251a162

In CP0 Index register, bit 31 means 'Probe Failure', while lowest bits
contain the TLB index.

In tlbwi and tlbwr instructions, this Probe Failure bit must be ignored
when reading the TLB index.

Attached patch fixes it.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5215 c046a42c-6fe2-441c-8c8c-71466251a162

cpu_mips_irqctrl_init() function in hw/mips_timer.c is empty.
Attached patch removes it, and its callers.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5214 c046a42c-6fe2-441c-8c8c-71466251a162

Attached patch fixes a warning in cpu_mips_find_by_name().
'name' is a string, so it should be declared as char*, not unsigned char*.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5213 c046a42c-6fe2-441c-8c8c-71466251a162

the content of target-alpha/helper.h is duplicated twice

(Tristan Gingold)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5212 c046a42c-6fe2-441c-8c8c-71466251a162

according to the alpha arch reference, the literal field of an operate
instruction is unsigned:

If bit <12> of the instruction is 1, an 8-bit zero-extended literal
constant is formed by bits
<20:13> of the instruction. The l teral is interpreted as a positive
integer bet ween 0 and 255
and is zero-extended to 64 bits.

This patch fixes the mis-interpretation of the literal field.

(Tristan Gingold)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5211 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5210 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5209 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5208 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5207 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds support for removing USB devices by host address.
Which is usefull for things like libvirtd because there is no easy way to
find guest USB address of the host device.
In other words you can now do:
   usb_add host:3.5
   ...
   usb_del host:3.5
Before the patch 'usb_del' did not support 'host:' notation.

----
Syntax for specifying auto connect filters has been improved.
Old syntax was
    host:bus.dev
    host:pid:vid
New syntax is
    host:auto:bus.dev[:pid:vid]
In both the cases any attribute can be set to "*".

New syntax is more flexible and lets you do things like
    host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */

It's now possible to remove auto filters. For example:
    usb_del host:auto:3.*:5533:*

Active filters are printed after all host devices in 'info usb' output.
Which now looks like this:

  Device 1.1, speed 480 Mb/s
    Hub: USB device 1d6b:0002, EHCI Host Controller
  Device 1.4, speed 480 Mb/s
    Class 00: USB device 1058:0704, External HDD
  Auto filters:
    Device 3.* ID *:*
Signed-off-by: NMax Krasnyansky <maxk@kernel.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162

USB is 99.8% async now :). 0.2% is the three control requests that
we need to execute synchronously. We could off-load that to a thread
or something but it's not worth the pain since those requests are
performed only during device initialization (ie when device is
connected to the VM).

The change is a bit bigger than I wanted due to the fact that generic
handle_packet()/handle_control() interface was not designed for
async transactions. So I ended up adding custom handle_packet()
code to usb-linux. We can make that generic if/when some other
component needs it.
Signed-off-by: NMax Krasnyansky <maxk@kernel.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5204 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5203 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5202 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5201 c046a42c-6fe2-441c-8c8c-71466251a162

realpath will horribly mangle a protocol so avoid calling it if the backing
file is a protocol.



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5200 c046a42c-6fe2-441c-8c8c-71466251a162