Conflicts:
	exec.c

When we're trying to get a newly registered phys memory client updated
with the current page mappings, we end up passing the region offset
(a ram_addr_t) as the start address rather than the actual guest
physical memory address (target_phys_addr_t).  If your guest has less
than 3.5G of memory, these are coincidentally the same thing.  If
there's more, the region offset for the memory above 4G starts over
at 0, so the set_memory client will overwrite it's lower memory entries.

Instead, keep track of the guest phsyical address as we're walking the
tables and pass that to the set_memory client.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When we register a physical memory client, we try to walk the page
tables, calling the set_memory hook for every entry.  Effectively
playing catchup for the client for everything already registered.
With this type, we only walk the 2nd entry of the l1 table,
typically missing all of the registered memory.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Used by HD audio controllers like our intel-hda.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

msi_init may fail, so we need to check on uninit if the cap was
actually installed. This also avoids that the users need to check.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The general control register is a byte register.
Add support for byte reads.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MDI control is a 32 bit register, but may be read or written using
8 or 16 bit access. Data is latched when the MSB is written.

Add support for byte/word read/write access.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pointer is a 32 bit register, but may be written using 8 or 16 bit writes.
Add support for byte/word writes.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

port is a 32 bit register, but may be written using 8 or 16 bit writes.
Add support for byte/word writes.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Like other Intel devices, e100 (eepro100) uses little endian byte order.

This patch was tested with these combinations:

i386 host, i386 + mipsel guests (le-le)
mipsel host, i386 guest (le-le)
i386 host, mips + ppc guests (le-be)
mips host, i386 guest (be-le)

mips and mipsel hosts were emulated machines.

v2:
Use prefix for new functions. Add the same prefix to stl_le_phys.
Fix alignment of mem (needed for word/dword reads/writes).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMU sends frames smaller than 60 bytes to ethernet nics.
Such frames are rejected by real NICs and their emulations.
To avoid this behaviour, other NIC emulations pad received
frames. This patch enables this workaround for eepro100, too.

All related code is marked with CONFIG_PAD_RECEIVED_FRAMES,
so we can drop this in case QEMU's networking code is
ever changed.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

cppcheck reports that 'packet' is unused.

It was only used to calculate the size of the preceding data.
Removing it saves a lot of stack space (local variable rx).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When DEBUG_EEPRO100 was enabled, unsupported writes were logged twice.
Now logging in eepro100_write1 and eepro100_write2 is similar to the
logging in eepro100_write4 (which already was correct).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Change the signal handling to indicate a signal is pending, rather
then printing directly from the signal handler.

In addition make the signal prints go to stderr, rather than stdout.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Acked-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

After the re-org of the atapi code, it might not be intuitive for a
reader of the code to understand why we're inserting a 'media not
present' state between cd changes.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Move misplaced comment for media_is_dvd()
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For shrinking images, you're supposed to use a negative size. However, the
leading minus makes getopt think that it's an option and so you get the help
text if you don't use -- like in 'qemu-img resize test.img -- -1G'.

This patch handles the size first and removes it from the argument list so that
getopt won't even try to interpret it and you don't need -- any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Prevent timers from firing right after starting.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

After enabling the framebuffer, ensure that the console is resized.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Global interrupt enable bit is already saved within the exception handler
helper routine. Thus remove extra code in translation routines.

Additionally, debug exceptions has always DEBA as base address.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This change fixes a long-standing immediate crash (memory corruption
and abort in glibc malloc code) in migration on 32bits.

The bug is present since this commit:

  commit 692d9aca97b865b0f7903565274a52606910f129
  Author: Bruce Rogers <brogers@novell.com>
  Date:   Wed Sep 23 16:13:18 2009 -0600

    qemu-kvm: allocate correct size for dirty bitmap

    The dirty bitmap copied out to userspace is stored in a long array,
    and gets copied out to userspace accordingly.  This patch accounts
    for that correctly.  Currently I'm seeing kvm crashing due to writing
    beyond the end of the alloc'd dirty bitmap memory, because the buffer
    has the wrong size.

    Signed-off-by: Bruce Rogers
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

 --- a/qemu-kvm.c
 +++ b/qemu-kvm.c
 @@ int kvm_get_dirty_pages_range(kvm_context_t kvm, unsigned long phys_addr,
 -            buf = qemu_malloc((slots[i].len / 4096 + 7) / 8 + 2);
 +            buf = qemu_malloc(BITMAP_SIZE(slots[i].len));
             r = kvm_get_map(kvm, KVM_GET_DIRTY_LOG, i, buf);

BITMAP_SIZE is now open-coded in that function, like this:

 size = ALIGN(((mem->memory_size) >> TARGET_PAGE_BITS), HOST_LONG_BITS) / 8;

The problem is that HOST_LONG_BITS in 32bit userspace is 32
but it's 64 in 64bit kernel.  So userspace aligns this to
32, and kernel to 64, but since no length is passed from
userspace to kernel on ioctl, kernel uses its size calculation
and copies 4 extra bytes to userspace, corrupting memory.

Here's how it looks like during migrate execution:

our=20, kern=24
our=4, kern=8
...
our=4, kern=8
our=4064, kern=4064
our=512, kern=512
our=4, kern=8
our=20, kern=24
our=4, kern=8
...
our=4, kern=8
our=4064, kern=4064
*** glibc detected *** ./x86_64-softmmu/qemu-system-x86_64: realloc(): invalid next size: 0x08f20528 ***

(our is userspace size above, kern is the size as calculated
by the kernel).

Fix this by always aligning to 64 in a hope that no platform will
have sizeof(long)>8 any time soon, and add a comment describing it
all.  It's a small price to pay for bad kernel design.

Alternatively it's possible to fix that in the kernel by using
different size calculation depending on the current process.
But this becomes quite ugly.

Special thanks goes to Stefan Hajnoczi for spotting the fundamental
cause of the issue, and to Alexander Graf for his support in #qemu.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
CC: Bruce Rogers <brogers@novell.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM only requires to set the raised IRQ in CPUState and to kick the
receiving vcpu if it is remote. Installing a specialized handler allows
potential future changes to the TCG code path without risking KVM side
effects.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This allows to override the interrupt handling of QEMU in system mode.
KVM will make use of it to set a specialized handler.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Both have only two lines in common, and we will convert the system
service into a callback which is of no use for user mode operation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
CC: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

kvmclock presence can be signalled by two different flags. So for
device creation, we have to test for both.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We have two bits that can represent kvmclock in cpuid.
They signal the guest which msr set to use. When we tweak flags
involving this value - specially when we use "-", we have to act on both.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

kvmclock is represented by two feature bits. Therefore, lookup_feature
needs to continue its search even after the first match. Enhance it
accordingly and switch to a bool return type at this chance.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the features provided by KVM_GET_SUPPORTED_CPUID directly to
mask out features from guest-visible cpuid.

The old get_para_features() mechanism is kept for older kernels that do not implement it.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The kernel doesn't fill the buffer provided to sched_getaffinity
with zero bytes, so neither should QEMU.
Signed-off-by: NMike McCormack <mj.mccormack@samsung.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Zeroing of the cpu array should start from &cpus[kernel_ret]
not &cpus[num_zeros_to_fill].

This fixes a crash in EFL's edje_cc running under qemu-arm.
Signed-off-by: NMike McCormack <mj.mccormack@samsung.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Debian Lenny and other installations with older linux versions
failed to compile linux-user because some CLONE_xxx macros are
undefined.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

* 'patches' of git://qemu.weilnetz.de/git/qemu:
  qemu-timer: Fix timers for w32
  qemu-timer: Avoid type casts
  qemu-timer: Remove unneeded include statement (w32)
  qemu-timer: Add and use new function qemu_timer_expired_ns

The latest virtfs pull broke the cris-softmmu target.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>