- 16 2月, 2015 32 次提交
-
-
由 John Snow 提交于
ahci_guest_io is a shorthand function that will, in one shot, execute a data command on the guest to the specified guest buffer location, in the requested amount. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-16-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Adds setters for size, prd_size and both via set_sizes. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423158090-25580-15-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Helps to verify that a command completed successfully. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
This patch adds the AHCICommand structure, and a set of functions to operate on the structure. ahci_command_create - Initialize and create a new AHCICommand in memory ahci_command_free - Destroy this object. ahci_command_set_buffer - Set where the guest memory DMA buffer is. ahci_command_commit - Write this command to the AHCI HBA. ahci_command_issue - Issue the committed command synchronously. ahci_command_issue_async - Issue the committed command asynchronously. ahci_command_wait - Wait for an asynchronous command to finish. ahci_command_slot - Get the number of the command slot we committed to. Helpers: size_to_prdtl - Calculate the required minimum PRDTL size from a buffer size. ahci_command_find - Given an ATA command mnemonic, look it up in the properties table to obtain info about the command. command_header_init - Initialize the command header with sane values. command_table_init - Initialize the command table with sane values. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/ahci.c:598:3: warning: redefinition of typedef 'AHCICommand' is a C11 feature [-Wtypedef-redefinition] } AHCICommand; I have replaced typedef struct ... AHCICommand; with struct ... ; --Stefan] Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Add a structure that defines some properties of various IDE commands. These will be used to simplify the interface to the libqos AHCI calls, lessening the redundancy of specifying and respecifying properties of commands to various helper functions. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423158090-25580-12-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Similar to ahci_set_command_header, add a helper that takes an in-memory representation of a command FIS and writes it to guest memory, handling endianness as-needed. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Add human-readable command names and other miscellaneous #defines to help make the code more readable. Some of these definitions are not yet used in this current series, but for convenience and sanity they have been lumped together here, as it's more trouble than it is worth in a test suite to hand-pick, one-by-one, which preprocessor definitions are useful per-each test. These definitions include: ATA Command Mnemonics Current expected AHCI sector size FIS magic bytes REG_H2D_FIS flags Command Header flags Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
This patch adds a few helpers to help sanity-check the response of the AHCI device after a command. ahci_d2h_check_sanity inspects the D2H Register FIS, ahci_pio_check_sanity inspects the PIO Setup FIS, and ahci_cmd_check_sanity inspects the command header. To support the PIO sanity check, a new structure is added for the PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their members renamed slightly to condense reserved members into fewer fields; and LBA fields are now represented by arrays of 8 byte chunks instead of independent variables. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
A simple helper that asserts a given port is not busy processing any commands via the TFD, Command Issue and SACT registers. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
A helper that compares a given port's current interrupts and checks them against a supplied list of expected interrupt bits, and throws an error if they do not match. The helper then resets the requested interrupts on this port, and asserts that the interrupt register is now empty. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
ahci_port_check_error checks a given port's error registers and asserts that everything from the port-level view is still OK. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Adds command header helper functions: -ahci_command_header_set -ahci_command_header_get, -ahci_command_destroy, and -ahci_cmd_pick These helpers help to quickly manage the command header information in the AHCI device. ahci_command_header_set and get will store or retrieve an AHCI command header, respectively. ahci_cmd_pick chooses the first available but least recently used command slot to allow us to cycle through the available command slots. ahci_command_destroy obliterates all information contained within a given slot's command header, and frees its associated command table, but not its DMA buffer! Lastly, the command table pointer fields (dba and dbau) are merged into a single 64bit value to make managing 64bit tests simpler. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
The structure name is a bit of a misnomer; the structure currently named command is actually the commandheader. A future patch in this series will add an actual "Command" structure, so we'll rename it now before the rest of the functions in this series try to use it. In addition, rename the "b1" and "b2" fields to be a unified uint16_t named "flags." Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Add a helper that assists in clearing out potentially old error and FIS information from an AHCI port's data structures. This ensures we always start with a blank slate for interrupt and FIS receipt information. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-3-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
This helper identifies which port of the AHCI HBA has a device we may run tests on. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-2-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
With global state removed, code responsible for booting up, verifying, and initializing the AHCI HBA is extracted and inserted into libqos/ahci.c, which would allow for other qtests in the future to quickly grab a meaningfully initialized reference to an AHCI HBA. Even without other users, functionalizing and isolating the code assists future AHCI tests that exercise Q35 migration. For now, libqos/ahci.o will be PC-only, but can be expanded into something arch-agnostic in the future, if needed. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-16-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Instead of re-querying the AHCI device for the FB and CLB buffers, save the pointer we gave to the device during initialization and reference these values instead. [Peter Maydell <peter.maydell@linaro.org> reported the following clang compiler warnings: tests/libqos/ahci.c:256:40: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("CLB: 0x%08lx", ahci->port[i].clb); tests/libqos/ahci.c:264:39: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat] g_test_message("FB: 0x%08lx", ahci->port[i].fb); The commit moved from uint32_t to uint64_t, so PRIx64 should be used for the format specifier. --Stefan] Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-15-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
These macros were a bad idea: They relied upon certain arguments being present locally with a specific name. With the endgoal being to factor out AHCI helper functions outside of the test file itself, these have to be replaced by more explicit helper setter/getter functions. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-14-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Introduce a set of "static inline" register helpers that are intended to replace the current set of macros with more functional versions that are better suited to inclusion in libqos than porcelain macros. As a stopgap measure before eliminating the porcelain macros, define them to use the new functions defined in the ahci.h header. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-13-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Make helper routines rely on the earmarked guest allocator object with AHCIQState/QOSSTate instead. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-12-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Rely on the PCI Device's bus pointer instead. One less global to worry about. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-11-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Move barsize, ahci_fingerprint and capabilities registers into the AHCIQState object, removing global ahci-related state from the ahci-test.c file. More churn, less globals. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-10-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Store the HBA memory base address in the new state object, to simplify function prototypes and encourage a more functional testing style. This causes a lot of churn, but this patch is as "simplified" as I could get it to be. This patch is therefore fairly mechanical and straightforward: Any case where we pass "hba_base" has been consolidated into the AHCIQState object and we pass the one unified parameter. Any case where we reference "ahci" and "hba_state" have been modified to use "ahci->dev" for the PCIDevice and "ahci->hba_state" to get at the base memory address, accordingly. Notes: - A needless return is removed from start_ahci_device. - For ease of reviewing, this patch can be reproduced (mostly) by: # Replace (ahci, hba_base) prototypes with unified parameter 's/(QPCIDevice \*ahci, void \*\?\*hba_base/(AHCIQState *ahci/' # Replace (ahci->dev, hba_base) calls with unified parameter 's/(ahci->dev, &\?hba_base)/(ahci)/' # Replace calls to PCI config space using "ahci" with "ahci->dev" 's/qpci_config_\(read\|write\)\(.\)(ahci,/qpci_config_\1\2(ahci->dev,/' After these, the remaining differences are easy to review by hand. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-9-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Create an operations structure so that the libqos interface can be architecture agnostic, and create a pc-specific interface to functions like qtest_boot. Move the libqos object in the Makefile from being ahci-test only to being linked with all tests that utilize the libqos features. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-8-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
To avoid the architecture-specific implementations of the generic qtest allocator having to know about fields within the allocator, add a page_size setter method for users or arch specializations to use. The allocator will assume a default page_size for general use, but it can always be overridden. Since this was the last instance of code directly using properties of the QGuestAllocator object directly, modify the type to be opaque and move the structure inside of malloc.c. mlist_new, which was previously exported, is made static local to malloc.c, as it has no external users. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/malloc.c:35:3: warning: redefinition of typedef 'QGuestAllocator' is a C11 feature [-Wtypedef-redefinition] } QGuestAllocator; I converted typedef struct ... QGuestAllocator; to struct ...; --Stefan] Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NMarc Marí <marc.mari.barcelo@gmail.com> Message-id: 1421698563-6977-7-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Allow a generic interface to alloc_init_flags, not just through pc_alloc_init_flags. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-6-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Add a va_list variant of the qtest_boot function. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-5-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
The intent of this file is to serve as a misc. utilities file to be shared amongst tests that are utilizing libqos facilities. In a later patch, migration test helpers will be added to libqos.c that will allow simplified testing of migration cases where libqos is "Just Enough OS" for migrations testing. The addition of the AHCIQState structure will also allow us to eliminate global variables inside of qtests to manage allocators and test instances in a better, more functional way. libqos.c: - Add qtest_boot - Add qtest_shutdown libqos.h: - Create QOSState structure for allocator and QTestState. ahci-test.c: - Move qtest_boot and qtest_shutdown to libqos.c/h - Create AHCIQState to interface with new qtest_boot/shutdown prototypes - Modify tests slightly to use new types. For now, the new object file is only linked to ahci-test, because it still relies on pc architecture specific code in libqos. The next two patches will reorganize the code to be more general. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-4-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Extract defines and other information to ahci.h, to be shared with other tests if they so please. At the very least, reduce clutter in the test file itself. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-3-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 John Snow 提交于
Move the list-specific initialization over into malloc.c, to keep all of the list implementation details within the same file. The allocation and freeing of these structures are now both back within the same layer. Signed-off-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1421698563-6977-2-git-send-email-jsnow@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Max Reitz 提交于
When the drive-mirror block job is completed, it will call bdrv_swap() on the source and the target BDS; this should obviously not result in a segmentation fault. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-4-git-send-email-mreitz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Max Reitz 提交于
The qemu process does not always need to be killed, just waiting for it can be fine, too. This introduces a way to do so. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-3-git-send-email-mreitz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 07 2月, 2015 8 次提交
-
-
由 Max Reitz 提交于
This patch makes use of the Error object for nbd_receive_negotiate() so that errors during negotiation look nicer. Furthermore, this patch adds an additional error message if the received magic was wrong, but would be correct for the other protocol version, respectively: So if an export name was specified, but the NBD server magic corresponds to an old handshake, this condition is explicitly signaled to the user, and vice versa. As these messages are now part of the "Could not open image" error message, additional filtering has to be employed in iotest 083, which this patch does as well. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
_make_test_img sets up an NBD server, _cleanup_test_img shuts it down; thus, _cleanup_test_img has to be called before _make_test_img is invoked another time. Furthermore, the pipe through _filter_test_img was unnecessary; _make_test_img already takes care of that. And finally, a filter is added to _filter_img_info to replace "nbd://127.0.0.1:10810" by "TEST_DIR/t.IMGFMT", since the former is the way to express the full image path (normally the latter) for NBD tests. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
In case of NBD, _make_test_img starts a new NBD server. Therefore, _cleanup_test_img (which shuts that server down) has to be invoked before the next _make_test_img call in order to make 100 work for NBD. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
As of 8f9e835f, probing should be disabled in the qemu-iotests (at least when using qemu-io). This broke 083's reference output (which consisted mostly of "Could not read image for determining its format"). This patch fixes it. Note that one case which failed before is now successful: Disconnect after data. This is due to qemu having read twice before (once for probing, once for the qemu-io read command), but only once now (the qemu-io read command). Therefore, reading is successful (which is correct). Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
These tests exercise error code paths in the QED image format. The tests are very simple, they just prove that the error path exits cleanly. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Message-id: 1421065893-18875-3-git-send-email-stefanha@redhat.com Reviewed-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Francesco Romani 提交于
Managing applications, like oVirt (http://www.ovirt.org), make extensive use of thin-provisioned disk images. To let the guest run smoothly and be not unnecessarily paused, oVirt sets a disk usage threshold (so called 'high water mark') based on the occupation of the device, and automatically extends the image once the threshold is reached or exceeded. In order to detect the crossing of the threshold, oVirt has no choice but aggressively polling the QEMU monitor using the query-blockstats command. This lead to unnecessary system load, and is made even worse under scale: deployments with hundreds of VMs are no longer rare. To fix this, this patch adds: * A new monitor command `block-set-write-threshold', to set a mark for a given block device. * A new event `BLOCK_WRITE_THRESHOLD', to report if a block device usage exceeds the threshold. * A new `write_threshold' field into the `BlockDeviceInfo' structure, to report the configured threshold. This will allow the managing application to use smarter and more efficient monitoring, greatly reducing the need of polling. [Updated qemu-iotests 067 output to add the new 'write_threshold' property. --Stefan] [Changed g_assert_false() to !g_assert() to fix the build on older glib versions. --Kevin] Signed-off-by: NFrancesco Romani <fromani@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Max Reitz 提交于
This patch is necessary to suppress the "probed raw" warning when running raw over nbd tests. Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
There is a bug in the recently added sys.platform test, and we no longer run python tests, because "linux2" is the value to compare here. So do a prefix match. According to python doc [1], the way to use sys.platform is "unless you want to test for a specific system version, it is therefore recommended to use the following idiom": if sys.platform.startswith('freebsd'): # FreeBSD-specific code here... elif sys.platform.startswith('linux'): # Linux-specific code here... [1]: https://docs.python.org/2.7/library/sys.html#sys.platformSigned-off-by: NFam Zheng <famz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-