提交 526ccb7a 编写于 作者: B balrog

Fix a bunch of type mismatch-related warnings (Jan Kiszka).

Fix a typo in my previous comming (spotted by Laurent Desnouges).


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4877 c046a42c-6fe2-441c-8c8c-71466251a162
上级 c5f2f668
......@@ -550,9 +550,9 @@ static void load_linux(const char *kernel_filename,
#if 0
fprintf(stderr,
"qemu: real_addr = %#zx\n"
"qemu: cmdline_addr = %#zx\n"
"qemu: prot_addr = %#zx\n",
"qemu: real_addr = 0x" TARGET_FMT_plx "\n"
"qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
"qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
real_addr,
cmdline_addr,
prot_addr);
......@@ -607,8 +607,8 @@ static void load_linux(const char *kernel_filename,
initrd_size = get_file_size(fi);
initrd_addr = (initrd_max-initrd_size) & ~4095;
fprintf(stderr, "qemu: loading initrd (%#x bytes) at %#zx\n",
initrd_size, initrd_addr);
fprintf(stderr, "qemu: loading initrd (%#x bytes) at 0x" TARGET_FMT_plx
"\n", initrd_size, initrd_addr);
if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
......@@ -778,7 +778,8 @@ static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
/* above 4giga memory allocation */
if (above_4g_mem_size > 0) {
cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size,
cpu_register_physical_memory((target_phys_addr_t) 0x100000000ULL,
above_4g_mem_size,
ram_addr + below_4g_mem_size);
}
......
......@@ -182,13 +182,13 @@ static void portb_changed(SH7750State * s, uint16_t prev)
static void error_access(const char *kind, target_phys_addr_t addr)
{
fprintf(stderr, "%s to %s (0x%08x) not supported\n",
fprintf(stderr, "%s to %s (0x" TARGET_FMT_plx ") not supported\n",
kind, regname(addr), addr);
}
static void ignore_access(const char *kind, target_phys_addr_t addr)
{
fprintf(stderr, "%s to %s (0x%08x) ignored\n",
fprintf(stderr, "%s to %s (0x" TARGET_FMT_plx ") ignored\n",
kind, regname(addr), addr);
}
......
......@@ -349,9 +349,9 @@ void old_reloc(struct lib_info *libinfo, uint32_t rl)
reloc_type = rl >> 30;
/* ??? How to handle this? */
#if defined(CONFIG_COLDFIRE)
ptr = (uint32_t *) (libinfo->start_code + offset);
ptr = (uint32_t *) ((unsigned long) libinfo->start_code + offset);
#else
ptr = (uint32_t *) (libinfo->start_data + offset);
ptr = (uint32_t *) ((unsigned long) libinfo->start_data + offset);
#endif
#ifdef DEBUG
......@@ -670,7 +670,7 @@ static int load_flat_file(struct linux_binprm * bprm,
}
/* zero the BSS. */
memset((void*)(datapos + data_len), 0, bss_len);
memset((void *)((unsigned long)datapos + data_len), 0, bss_len);
return 0;
}
......
......@@ -101,19 +101,19 @@ void do_m68k_simcall(CPUM68KState *env, int nr)
{
uint32_t *args;
args = (uint32_t *)(env->aregs[7] + 4);
args = (uint32_t *)(unsigned long)(env->aregs[7] + 4);
switch (nr) {
case SYS_EXIT:
exit(ARG(0));
case SYS_READ:
check_err(env, read(ARG(0), (void *)ARG(1), ARG(2)));
check_err(env, read(ARG(0), (void *)(unsigned long)ARG(1), ARG(2)));
break;
case SYS_WRITE:
check_err(env, write(ARG(0), (void *)ARG(1), ARG(2)));
check_err(env, write(ARG(0), (void *)(unsigned long)ARG(1), ARG(2)));
break;
case SYS_OPEN:
check_err(env, open((char *)ARG(0), translate_openflags(ARG(1)),
ARG(2)));
check_err(env, open((char *)(unsigned long)ARG(0),
translate_openflags(ARG(1)), ARG(2)));
break;
case SYS_CLOSE:
{
......@@ -142,7 +142,7 @@ void do_m68k_simcall(CPUM68KState *env, int nr)
struct m86k_sim_stat *p;
rc = check_err(env, fstat(ARG(0), &s));
if (rc == 0) {
p = (struct m86k_sim_stat *)ARG(1);
p = (struct m86k_sim_stat *)(unsigned long)ARG(1);
p->sim_st_dev = tswap16(s.st_dev);
p->sim_st_ino = tswap16(s.st_ino);
p->sim_st_mode = tswap32(s.st_mode);
......
......@@ -2755,7 +2755,7 @@ static void setup_rt_frame(int sig, struct target_sigaction *ka,
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, (unsigned long *)&frame->uc.uc_link);
err |= __put_user((void *)target_sigaltstack_used.ss_sp,
err |= __put_user((unsigned long)target_sigaltstack_used.ss_sp,
&frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->gregs[15]),
&frame->uc.uc_stack.ss_flags);
......@@ -2982,11 +2982,11 @@ static void setup_frame(int sig, struct target_sigaction *ka,
setup_sigcontext(&frame->sc, env);
/* Move the stack and setup the arguments for the handler. */
env->regs[R_SP] = (uint32_t) frame;
env->regs[R_SP] = (uint32_t) (unsigned long) frame;
env->regs[10] = sig;
env->pc = (unsigned long) ka->_sa_handler;
/* Link SRP so the guest returns through the trampoline. */
env->pregs[PR_SRP] = (uint32_t) &frame->retcode[0];
env->pregs[PR_SRP] = (uint32_t) (unsigned long) &frame->retcode[0];
unlock_user_struct(frame, frame_addr, 1);
return;
......
......@@ -72,6 +72,7 @@
#include "linux_loop.h"
#include "qemu.h"
#include "qemu-common.h"
#if defined(USE_NPTL)
#include <linux/futex.h>
......
......@@ -594,7 +594,7 @@ void OPPROTO op_shlr16_Rn(void)
void OPPROTO op_tasb_rN(void)
{
cond_t((env->gregs[PARAM1] && 0xff) == 0);
cond_t((env->gregs[PARAM1] & 0xff) == 0);
*(int8_t *) &env->gregs[PARAM1] |= 0x80;
RETURN();
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册