Fix the default value of CONFIG_VERSION_DIST to use uppercase "LEDE".
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Calling a build ##.##-CURRENT might mislead users into thinking that this
build is the most current release of a branch.
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

The TL-WR842N v2 has the following switch port layout with swconfig port 0
being connected to eth1:

            Power  LAN4    LAN3    LAN2    LAN1    WAN     USB
             (*) | [...] | [...] | [...] | [...] | [...] | [.]
    swconfig port:   1       4       3       2      n/a
    netdev:        eth1    eth1    eth1    eth1    eth0

Adjust the board defaults to match this model specific layout.
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

It's based on the WRT160NL according to
https://wiki.openwrt.org/toh/linksys/e2100l

Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244
and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch
was conceived.
Signed-off-by: NGad Krumholz <gad.krumholz@gmail.com>
[Jo-Philipp Wich: fix ordering, move addpattern change into separate commit]
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Based on OpenWrt PR#250
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Currently, installing kmod-sdhci fails with "sdhci is already loaded" since
"sdhci.ko" is inserted explicitely first, the implicitely loaded again when
"sdhci-pltfm.ko" is inserted as the latter depends on the former.

Remove the explicit autoprobe of "sdhci.ko" to fix the postinstall script.
Acked-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c89" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Saves some more space on the package index
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

We have switched opkg to sha256 a long time ago, and shrinking package
lists is useful for systems that are running low on RAM
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

This will avoid loading it in the default configuration, which reduces
image size a bit, and (more importantly) improves performance by
avoiding some unnecessary netfilter hooks
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Slightly improves compression for each executable, saving about 4k from
the default ar71xx rootfs
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Reduces binary size
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Update libpcap to upstream release 1.8.1
Change the name from libpcap.so.1.3 to libpcap.so.1
Remove parts of patch 201 which moved code among src files.
Import patch 204 from Debian to update the USB path.
Signed-off-by: NPaul Wassi <p.wassi@gmx.at>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix parallel build bug]

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

this package references an undefined variable for its submenu.
Remove this NOP variable assignment.
Signed-off-by: NAlberto Bursi <alberto.bursi@outlook.it>

this kernel module currently does not set submenu.
Fix this by adding it to the "Others" submenu
Signed-off-by: NAlberto Bursi <alberto.bursi@outlook.it>

Add support for specifying a call profile index instead of APN. A
specific index different from 1 must be used for some service
provider and modem combinations.

In addition, change the manufacturer detection to use the standard
AT+CGMI command, which produces more predictable output than ATI,
remove the redundant ipv6 option, since it is less ambiguous to
directly specify the PDP context type with mobile connections, and
fix missing device during teardown when using ncm through the wwan
proto.
Signed-off-by: NMatti Laakso <malaakso@elisanet.fi>

Update uqmi to latest version, which brings about support for
specifying a call profile index instead of APN. A specific index
different from 1 must be used for some service provider and modem
combinations.

Also change option dhcp to dhcpv6, since IPv4 now always uses DHCP,
replace option ipv6 with pdptype, which is less ambiguous, and
make autoconnect optional and default it to off for IPv6 due to it
not working with statically configured IPv6.
Signed-off-by: NMatti Laakso <malaakso@elisanet.fi>

Harmonise handling of DEFAULT_PATH by removing the patch introducing #ifndef
guards around the path, and only using one means to set the path in the
makefile.
Signed-off-by: NDario Ernst <Dario.Ernst@riverbed.com>

This patch add the 3G modem DWM-158 to the usb-serial option driver.
The DWM-158 is a pcie 3G modem. It is embedded in the DWR-512 modem
supportet by lede. The patch has been submitted and merged in the upstream
linux-next repository.
Signed-off-by: NGiuseppe Lippolis <giu.lippolis@gmail.com>

This patch adds supports for the WNR2000v1 board with 4MB flash, and
produces device-specific factory, rootfs, and sysupgrade files for the
WNR2000v1. This board is errorneously claimed as supported on the OpenWRT
wiki as AP81, but AP81 image would not work because of APT81 image
requiring having 8MB of flash, while WNR2000v1 has only 4MB.

The image requires the u-boot bootloader to be modified to fuhry's
bootloader first.

Short specification:

- CPU: Atheros AR9132
- 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps
- 4 MB of Flash
- 32 MB of RAM
- UART header (J1) on board
- 1x button

Factory/Initial flash instructions:

- Set up a TFTP server on your local machine.
- Download the uImage for ar71xx-generic and the rootfs image for
  ar71xx-generic-wnr2000 and save in the tftp server root.
- Gain serial access to the router via the UART port (telnetenable over
  the network only won't work!).
- Upgrade the u-boot bootloader to fuhry's version by running the
  script: http://fuhry.com/b/wnr2000/install-repart.sh
- When the router restarts, interrupt u-boot and gain access to u-boot command line.
- Repartititon the board and flash initial uImage and rootfs as follow.

Commands to type in u-boot:

	# tells u-boot that we have a tftp server on 192.168.1.10
	setenv serverip 192.168.1.10

	# tells u-boot that the router should take the address 192.168.1.1
	setenv ipaddr 192.168.1.1

	# erase the region from 0x050000-0x3f0000
	erase 0xbf050000 +0x3A0000

	# loads sqfs.bin on TFTP server, and put it to memory address 0x81000000
	tftpboot 0x81000000 sqfs.bin
	# it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ
	# copy bit by bit 0xZZZZZZ bytes from offset 0x050000
	cp.b 0x81000000 0xbf050000 0xZZZZZZ

	# same to the uImage.bin, write it right next to sqfs.bin
	# again, 0xYYYYYY is the length that tftpboot reports
	tftpboot 0x81000000 uImage.bin
	cp.b 0x81000000 0xbf2a0000 0xYYYYYY

	# We need to tell the kernel what board it is booting into, and where to find the partitions
	setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd"

	# Tell u-boot where to find the uImage
	setenv bootcmd "bootm 0xbf2a0000"

	# Tell u-boot to save parameters to the u-boot-env partitions
	saveenv

	# Reset the board
	reset

Tested on:

- WNR2000v1 board.
- Initial flash works.

Known bugs:

- I don't know why factory image doesn't work on initial flash on stock
  firmware in u-boot recovery mode while it should.
- Sysupgrade does not yet work, if you do -f it will mess up your
  installation (requiring a reinstall of sqfs and uImage).
Signed-off-by: NHuan Truong <htruong@tnhh.net>

The default package selection was missing the correct FW for ath10k to
work.
Signed-off-by: NJing Lin <mumuqz@163.com>

Update procd to latest HEAD in order to introduce support for services signals:

- Adds a new service.signal ubus call to send a kill() signal to one or all
  running instances of a given service

- Adds a new "reload_signal" property which allows service init scripts to
  request procd to send a specific kill() signal on reload, instead of
  stopping and restarting running processes

Also fixes some potential memory leaks reported by cppcheck and an environment
variable corruption in the trace command.
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

The xt_id match was used by the firewall3 package to track its own rules but
the approach has been changed to use xt_comment instead now, so we can drop
this nonstandard extension.
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Update to current HEAD in order to drop automatic generation of per-zone
NOTRACK rules.

The NOTRACK rules used to provide a little performance improvement but the
later introduction of the netfilter conntrack cache made those rules largely
unnecessary. Additionally, those rules caused various issues which broke
stateful firewalling in some scenarios.
Signed-off-by: NJo-Philipp Wich <jo@mein.io>

Depend on the kmod-thermal package when it is activated, this fixes
compile problems on some targets.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>

Depending on the dhcp uci config pidof dnsmasq can return
multiple pids. Fix re-reading of the hostfile by dnsmasq in
such case by sending SIGHUP signal to each of the returned
pids.
Signed-off-by: NHans Dedecker <dedeckeh@gmail.com>

Let dnsmasq read all hosts files in /tmp/hosts directory by specifying
/tmp/hosts as argument of --addn-host
Signed-off-by: NHans Dedecker <dedeckeh@gmail.com>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Store only numeric user/group id. Group 0 is 'root' on linux and 'wheel' on
BSD and Mac OS X.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Signed-off-by: NFelix Fietkau <nbd@nbd.name>

Useful for further rework
Signed-off-by: NFelix Fietkau <nbd@nbd.name>

These patches were queued for 4.10. For possible use cases see added:
[PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>

Signed-off-by: NRafał Miłecki <rafal@milecki.pl>

Bump & refresh patches for all 4.4 supported targets.

Compile & run tested: ar71xx - Archer C7 v2
Signed-off-by: NKevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>

Signed-off-by: NRafał Miłecki <rafal@milecki.pl>