- 03 9月, 2023 4 次提交
-
-
由 Felix Fietkau 提交于
Check for null instead of truish value Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
It returned the wrong value when using HT40- Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
Fixes 40 MHz channel bandwidth on 2.4 GHz AP+STA Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
Simplifies code and removes #ifdef statements Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
- 02 9月, 2023 7 次提交
-
-
由 Hank Moretti 提交于
The NMBM-Enabled layout did not use fit image, it just need default process. So it was been removed in platform.sh. It will fix sysupgrade error for xiaomi,mi-router-wr30u-112m-nmbm. Signed-off-by: NHank Moretti <mchank9999@gmail.com>
-
由 Hannu Nyman 提交于
Remove stale sites from @GNOME alias: * remove 2 sites that have stale 3 years old content * remove 2 sites that have dropped GNOME * convert 2 sites from FTP to HTTP Signed-off-by: NHannu Nyman <hannu.nyman@iki.fi>
-
由 John Audia 提交于
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.50 All patches automatically rebased. Build system: x86/64 Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod, ipq806x/R7800 Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod, ipq806x/R7800 Signed-off-by: NJohn Audia <therealgraysky@proton.me>
-
由 John Audia 提交于
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.129 All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: NJohn Audia <therealgraysky@proton.me>
-
由 Felix Fietkau 提交于
When a dependency is pulled in via conditional depends, and the condition is already selected earlier in the chain, drop the condition. This avoids some corner cases that trigger recursive dependencies. Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
This reverts commit 6c3eff9d. This appears to cause some regressions in generated config. Will be replaced with a fixed version later Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
This makes it easier to keep track of changes in the generated output, when the script is modified Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
- 01 9月, 2023 8 次提交
-
-
由 Felix Fietkau 提交于
23a434d0d15d tests: fix expected test output 840ccdeeabce fw4: avoid emitting invalid rule jump targets 20da9933fd7e fw4: fix another instance of invalid rule jump targets 598d9fbb5179 fw4: remove special cases around hw flow offloading Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
This allows supporting a mix of devices with or without hw offloading support Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
When a package foo depends on PACKAGE_foo:bar (in order to make build dependencies conditional), tracking transitive dependencies can fail because the internal seen flag is checked/set before eliminating the fake conditional dependency. This can show up as a depends on not properly turned into a select further down in the dependency chain Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
Always enable nl80211 driver support Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Rafał Miłecki 提交于
This stops NVMEM driver from using MMIO access past booting and messing with NAND controller state. Link: https://forum.openwrt.org/t/asus-rt-ac88u-hw-a6-broken-in-22-03-3/147882Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
-
由 Daniel Golle 提交于
1a07f1dff32b make_ethtool_modes_h.sh: apply anti-bashism Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
f429bd94f99e system-linux: switch to new ETHTOOL_xLINKSETTINGS API Fixes AN announcement for speeds beyond 1 GBit/s. Adds new UCI options for Ethernet devices: - autoneg: switch on or off auto-negotiation - pause: if set to 0, do not announce symmetric flow control capability - asym_pause: if set to 0, do not announce asymmetric flow control capability. - rxpause: if set overrides AN and forces RX pause accordingly - txpause: if set overrides AN and forces TX pause accordingly Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
Relocating the device tree is required for being apply to apply device tree overylay at boot. Fixes: 34bb3309 ("mediatek: use updated device tree overlay mechanism for BPi-R64") Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
- 31 8月, 2023 7 次提交
-
-
由 Felix Fietkau 提交于
Without it, a lot of authentication modes fail without obvious error messages Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
It is no longer used Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
db3934d2f740 scripts/netifd-wireless.sh: properly fix WPA3 Enterprise support Support the following values for the different WPA3 Enterprise modes: - wpa3-mixed: WPA3 Enterprise transitional mode This supports EAP with both SHA1 and SHA-256, with optional MFP - wpa3: WPA3 Enterprise only mode This supports only SHA256 with mandatory MFP - wpa3-192: WPA3 Enterprise with mandatory 192 bit support This uses only GCMP-256 ciphers Disable 192 bit support and GCMP-256 ciphers for the regular "wpa3" mode. It seems that even leaving in optional 192 bit support breaks auth on some clients, including iOS devices. Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
WPA3 Enterprise-transitional requires optional MFP support and SHA1+SHA256 WPA3 Enterprise-only requires SHA1 support disabled and mandatory MFP. Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Felix Fietkau 提交于
Use the SHA384 variant to account for longer keys with more security Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Rafał Miłecki 提交于
This symbol was added by commit 2e6f34faa7e0 ("Input: Add IBM Operation Panel driver") to v6.1. It depends on I2C so it's available to limited amount of targets. It needs to be specified thought to allow kernel configuration. For bcm53xx this fixes: IBM Operation Panel driver (INPUT_IBM_PANEL) [N/m/?] (NEW) Signed-off-by: NRafał Miłecki <rafal@milecki.pl> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <rafal@milecki.pl>
-
- 30 8月, 2023 5 次提交
-
-
由 Felix Fietkau 提交于
It seems that this was not functioning properly and was likely completely unused. Keeping this out of tree also introduced some annoying churn when updating, because of the iw nl80211.h sync patch. If this is needed, it will be reintroduced when/if it is added upstream Signed-off-by: NFelix Fietkau <nbd@nbd.name>
-
由 Mathew McBride 提交于
These suboptions (PLATFORM, FSL_MC and MLX5_VFIO_PCI) may be prompted for when VFIO is enabled, regardless of architecture. These are not related to the main vfio use case (passthrough of PCIe devices) Signed-off-by: NMathew McBride <matt@traverse.com.au>
-
由 Mathew McBride 提交于
Arm platforms with the right hardware blocks (such as GICv3.0+ interrupt controller and SMMU/IOMMU) are able to use vfio-pci to pass through PCI devices to a VM. Signed-off-by: NMathew McBride <matt@traverse.com.au>
-
由 Mathew McBride 提交于
The vfio module only exposes the enable_unsafe_noiommu_mode parameter if CONFIG_VFIO_NOIOMMU is enabled. When it isn't, the module will complain about an unknown parameter: vfio: unknown parameter 'enable_unsafe_noiommu_mode' ignored As CONFIG_VFIO_NOIOMMU is disabled by the module package, we can remove the module loading parameter. Signed-off-by: NMathew McBride <matt@traverse.com.au>
-
由 John Audia 提交于
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.49 All no patches automatically rebased, just update to checksum for new version. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: NJohn Audia <therealgraysky@proton.me>
-
- 29 8月, 2023 4 次提交
-
-
由 Daniel Golle 提交于
Always enable built-in 2.5G PHY on MT7988 for now, so that it can be used. In future it would be nice to be able to switch power and MDIO access via address 0 at run-time in Linux, both, to be able to use external PHYs at address 0 and to reduce power consumption on systems not using the built-in 2.5G PHY. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
The U-Boot build for the MT7988 reference board booting from SD card wrongly depended on the 'ddr4' variant of the ARM TrustedFirmware-A build even though the 'comb' variant is used. Fix that dependency. Fixes: 572ea680 ("uboot-mediatek: add patches for MT7988 and builds for RFB") Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Linhui Liu 提交于
Changes from version 4.2.0 to version 4.2.1: - Bug fixes (see <https://www.mpfr.org/mpfr-4.2.0/#fixed> and/or the ChangeLog file). - Improved MPFR manual. - Configure tests: replaced the test of the link with GMP, in order to avoid the use of a function without a prototype (Autoconf issue), as this is obsolescent in ISO C. The new test should be more robust. Signed-off-by: NLinhui Liu <liulinhui36@gmail.com>
-
由 Daniel Golle 提交于
When adapting the network configuration for MT7988 RFB a stray quote was left in a script. Remove it to fix generating the default network configuration. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
- 28 8月, 2023 5 次提交
-
-
由 Daniel Golle 提交于
Import commits from upstream Linux replacing some downstream patches. Move accepted patches from pending-{5.15,6.1} to backport-{5.15,6.1}. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
Some recent models of the Ubiquiti Networks UniFi 6 LR access point come with a RealTek RTL8211FS 1000M/100M/10M PHY instead of the Aquantia AQR112 2500M/1000M/100M/10M PHY used in both v1 and v2. Add build for this variant so we can support Ethernet with the PHY. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
While the v2 is nearly identical to v1, v3 uses a different PHY and needs a different build for Ethernet to work in U-Boot. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
Switch to OpenWrt uImage.FIT bootmethod and include various bootloader artifacts with the generated binaries. Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-
由 Daniel Golle 提交于
Select many potentially useful options for the MT7988 RFB U-Boot builds. The resulting loader is intended as a development tool and intends to be generic. It does *not* have a default bootcmd set, but allows to boot pretty much everything, including EFI executables. To install this U-Boot build to the eMMC: opkg install mmc-utils partx-utils mmc bootpart enable 1 1 /dev/mmcblk0 echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=*mediatek_mt7988a-rfb-nand-emmc-preloader.bin of=/dev/mmcblk0boot0 dd if=*mediatek_mt7988a-rfb-nand-emmc-gpt.bin of=/dev/mmcblk0 partx -a /dev/mmcblk0 dd if=*mediatek_mt7988a-rfb-nand-emmc-bl31-uboot.fip of=/dev/mmcblk0p3 Signed-off-by: NDaniel Golle <daniel@makrotopia.org>
-