提交 185eacba 编写于 作者: J Jo-Philipp Wich

modules/admin-full: convert cbi maps to new network model

上级 ba84656d
......@@ -34,6 +34,11 @@ m:chain("wireless")
nw.init(m.uci)
fw.init(m.uci)
--function m.on_commit(map)
-- nw.init(map.uci)
-- fw.init(map.uci)
--end
s = m:section(NamedSection, arg[1], "interface", translate("Common Configuration"))
s.addremove = false
......@@ -107,7 +112,15 @@ function ifname_single.write(self, s, val)
for _, i in ipairs(n:get_interfaces()) do
n:del_interface(i)
end
n:add_interface(val)
for i in val:gmatch("%S+") do
n:add_interface(i)
-- if this is not a bridge, only assign first interface
if self.option == "ifname_single" then
break
end
end
end
end
......
......@@ -14,7 +14,6 @@ $Id$
local wa = require "luci.tools.webadmin"
local nw = require "luci.model.network"
local ww = require "luci.model.wireless"
local fs = require "nixio.fs"
arg[1] = arg[1] or ""
......@@ -31,19 +30,15 @@ m:chain("network")
local ifsection
function m.on_commit(map)
nw.init(map.uci)
ww.init(map.uci)
local wnet = ww:get_network(arg[2])
local wnet = nw:get_wifinet(arg[2])
if ifsection and wnet then
ifsection.section = wnet.sid
end
end
nw.init(m.uci)
ww.init(m.uci)
local wnet = ww:get_network(arg[2])
local wnet = nw:get_wifinet(arg[2])
-- redirect to overview page if network does not exist anymore (e.g. after a revert)
if not wnet then
......@@ -51,7 +46,7 @@ if not wnet then
return
end
m.title = ww:get_i18n(wnet)
m.title = wnet:get_i18n()
local iw = luci.sys.wifi.getiwinfo(arg[1])
......@@ -276,40 +271,37 @@ end
----------------------- Interface -----------------------
local wnet = ww:get_network(arg[2])
if wnet then
s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
ifsection = s
s.addremove = false
s.anonymous = true
s.defaults.device = arg[1]
s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
ifsection = s
s.addremove = false
s.anonymous = true
s.defaults.device = arg[1]
s:tab("general", translate("General Setup"))
s:tab("encryption", translate("Wireless Security"))
s:tab("macfilter", translate("MAC-Filter"))
s:tab("advanced", translate("Advanced Settings"))
s:tab("general", translate("General Setup"))
s:tab("encryption", translate("Wireless Security"))
s:tab("macfilter", translate("MAC-Filter"))
s:tab("advanced", translate("Advanced Settings"))
s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
mode = s:taboption("general", ListValue, "mode", translate("Mode"))
mode.override_values = true
mode:value("ap", translate("Access Point"))
mode:value("sta", translate("Client"))
mode:value("adhoc", translate("Ad-Hoc"))
mode = s:taboption("general", ListValue, "mode", translate("Mode"))
mode.override_values = true
mode:value("ap", translate("Access Point"))
mode:value("sta", translate("Client"))
mode:value("adhoc", translate("Ad-Hoc"))
bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
network = s:taboption("general", Value, "network", translate("Network"),
network = s:taboption("general", Value, "network", translate("Network"),
translate("Choose the network you want to attach to this wireless interface. " ..
"Select <em>unspecified</em> to not attach any network or fill out the " ..
"<em>create</em> field to define a new network."))
network.rmempty = true
network.template = "cbi/network_netlist"
network.widget = "radio"
network.rmempty = true
network.template = "cbi/network_netlist"
network.widget = "radio"
function network.write(self, section, value)
function network.write(self, section, value)
local i = nw:get_interface(section)
if i then
if value == '-' then
......@@ -329,11 +321,11 @@ if wnet then
end
end
end
end
end
-------------------- MAC80211 Interface ----------------------
-------------------- MAC80211 Interface ----------------------
if hwtype == "mac80211" then
if hwtype == "mac80211" then
if fs.access("/usr/sbin/iw") then
mode:value("mesh", "802.11s")
end
......@@ -377,13 +369,13 @@ if wnet then
hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
hidden:depends({mode="ap"})
hidden:depends({mode="ap-wds"})
end
end
-------------------- Madwifi Interface ----------------------
-------------------- Madwifi Interface ----------------------
if hwtype == "atheros" then
if hwtype == "atheros" then
mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
mode:value("monitor", translate("Monitor"))
mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
......@@ -468,12 +460,12 @@ if wnet then
local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
probereq.enabled = "0"
probereq.disabled = "1"
end
end
-------------------- Broadcom Interface ----------------------
-------------------- Broadcom Interface ----------------------
if hwtype == "broadcom" then
if hwtype == "broadcom" then
mode:value("wds", translate("WDS"))
mode:value("monitor", translate("Monitor"))
......@@ -491,12 +483,12 @@ if wnet then
bssid:depends({mode="wds"})
bssid:depends({mode="adhoc"})
end
end
----------------------- HostAP Interface ---------------------
----------------------- HostAP Interface ---------------------
if hwtype == "prism2" then
if hwtype == "prism2" then
mode:value("wds", translate("WDS"))
mode:value("monitor", translate("Monitor"))
......@@ -518,27 +510,27 @@ if wnet then
s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
end
end
------------------- WiFI-Encryption -------------------
------------------- WiFI-Encryption -------------------
encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
encr.override_values = true
encr.override_depends = true
encr:depends({mode="ap"})
encr:depends({mode="sta"})
encr:depends({mode="adhoc"})
encr:depends({mode="ahdemo"})
encr:depends({mode="ap-wds"})
encr:depends({mode="sta-wds"})
encr:depends({mode="mesh"})
encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
encr.override_values = true
encr.override_depends = true
encr:depends({mode="ap"})
encr:depends({mode="sta"})
encr:depends({mode="adhoc"})
encr:depends({mode="ahdemo"})
encr:depends({mode="ap-wds"})
encr:depends({mode="sta-wds"})
encr:depends({mode="mesh"})
encr:value("none", "No Encryption")
encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
encr:value("none", "No Encryption")
encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
local hostapd = fs.access("/usr/sbin/hostapd")
......@@ -574,46 +566,47 @@ if wnet then
"and ad-hoc mode) to be installed."
)
end
elseif hwtype == "broadcom" then
elseif hwtype == "broadcom" then
encr:value("psk", "WPA-PSK")
encr:value("psk2", "WPA2-PSK")
encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
end
end
encr:depends("mode", "ap")
encr:depends("mode", "sta")
encr:depends("mode", "ap-wds")
encr:depends("mode", "sta-wds")
encr:depends("mode", "wds")
server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
server:depends({mode="ap", encryption="wpa"})
server:depends({mode="ap", encryption="wpa2"})
server:depends({mode="ap-wds", encryption="wpa"})
server:depends({mode="ap-wds", encryption="wpa2"})
server.rmempty = true
port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
port:depends({mode="ap", encryption="wpa"})
port:depends({mode="ap", encryption="wpa2"})
port:depends({mode="ap-wds", encryption="wpa"})
port:depends({mode="ap-wds", encryption="wpa2"})
port.rmempty = true
key = s:taboption("encryption", Value, "key", translate("Key"))
key:depends("encryption", "wep")
key:depends("encryption", "psk")
key:depends("encryption", "psk2")
key:depends("encryption", "psk+psk2")
key:depends("encryption", "psk-mixed")
key:depends({mode="ap", encryption="wpa"})
key:depends({mode="ap", encryption="wpa2"})
key:depends({mode="ap-wds", encryption="wpa"})
key:depends({mode="ap-wds", encryption="wpa2"})
key.rmempty = true
key.password = true
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
encr:depends("mode", "ap")
encr:depends("mode", "sta")
encr:depends("mode", "ap-wds")
encr:depends("mode", "sta-wds")
encr:depends("mode", "wds")
server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
server:depends({mode="ap", encryption="wpa"})
server:depends({mode="ap", encryption="wpa2"})
server:depends({mode="ap-wds", encryption="wpa"})
server:depends({mode="ap-wds", encryption="wpa2"})
server.rmempty = true
port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
port:depends({mode="ap", encryption="wpa"})
port:depends({mode="ap", encryption="wpa2"})
port:depends({mode="ap-wds", encryption="wpa"})
port:depends({mode="ap-wds", encryption="wpa2"})
port.rmempty = true
key = s:taboption("encryption", Value, "key", translate("Key"))
key:depends("encryption", "wep-open")
key:depends("encryption", "wep-shared")
key:depends("encryption", "psk")
key:depends("encryption", "psk2")
key:depends("encryption", "psk+psk2")
key:depends("encryption", "psk-mixed")
key:depends({mode="ap", encryption="wpa"})
key:depends({mode="ap", encryption="wpa2"})
key:depends({mode="ap-wds", encryption="wpa"})
key:depends({mode="ap-wds", encryption="wpa2"})
key.rmempty = true
key.password = true
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
nasid:depends({mode="ap", encryption="wpa"})
nasid:depends({mode="ap", encryption="wpa2"})
......@@ -663,7 +656,6 @@ if wnet then
password:depends({mode="sta", eap_type="peap", encryption="wpa"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
end
end
return m
......@@ -14,7 +14,6 @@ $Id$
local nw = require "luci.model.network"
local fw = require "luci.model.firewall"
local wl = require "luci.model.wireless"
local uci = require "luci.model.uci".cursor()
local http = require "luci.http"
......@@ -34,7 +33,6 @@ end
nw.init(uci)
fw.init(uci)
wl.init(uci)
m.hidden = {
device = http.formvalue("device"),
......@@ -145,14 +143,15 @@ function attachnet.parse(self, section)
if not net then
self.error = { [section] = "missing" }
else
local wdev = wl:get_device(m.hidden.device)
wdev:disabled(false)
wdev:channel(m.hidden.channel)
local wdev = nw:get_wifidev(m.hidden.device)
wdev:set("disabled", false)
wdev:set("channel", m.hidden.channel)
if replace:formvalue(section) then
local n
for _, n in ipairs(wdev:get_networks()) do
wl:del_network(n:name())
for _, n in ipairs(wdev:get_wifinets()) do
wdev:del_wifinet(n)
end
end
......@@ -177,8 +176,7 @@ function attachnet.parse(self, section)
wconf.bssid = m.hidden.bssid
end
local wnet = wl:add_network(wconf)
local wnet = wdev:add_wifinet(wconf)
if wnet then
if zone then
fw:del_network(net:name())
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册