diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
index 916c26b4fbdff1437da930bfbcbcb2f8e6ab7f2f..4dccbc22a3567ab28f9c2c52a376e3d7b419ccd6 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/ifaces.lua
@@ -34,6 +34,11 @@ m:chain("wireless")
nw.init(m.uci)
fw.init(m.uci)
+--function m.on_commit(map)
+-- nw.init(map.uci)
+-- fw.init(map.uci)
+--end
+
s = m:section(NamedSection, arg[1], "interface", translate("Common Configuration"))
s.addremove = false
@@ -107,7 +112,15 @@ function ifname_single.write(self, s, val)
for _, i in ipairs(n:get_interfaces()) do
n:del_interface(i)
end
- n:add_interface(val)
+
+ for i in val:gmatch("%S+") do
+ n:add_interface(i)
+
+ -- if this is not a bridge, only assign first interface
+ if self.option == "ifname_single" then
+ break
+ end
+ end
end
end
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
index db11832b3249375bc75c700c2072c12282016e1c..6568c7618dc77a2ae6766e025430a51aec9c25ed 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
@@ -14,7 +14,6 @@ $Id$
local wa = require "luci.tools.webadmin"
local nw = require "luci.model.network"
-local ww = require "luci.model.wireless"
local fs = require "nixio.fs"
arg[1] = arg[1] or ""
@@ -31,19 +30,15 @@ m:chain("network")
local ifsection
function m.on_commit(map)
- nw.init(map.uci)
- ww.init(map.uci)
-
- local wnet = ww:get_network(arg[2])
+ local wnet = nw:get_wifinet(arg[2])
if ifsection and wnet then
ifsection.section = wnet.sid
end
end
nw.init(m.uci)
-ww.init(m.uci)
-local wnet = ww:get_network(arg[2])
+local wnet = nw:get_wifinet(arg[2])
-- redirect to overview page if network does not exist anymore (e.g. after a revert)
if not wnet then
@@ -51,7 +46,7 @@ if not wnet then
return
end
-m.title = ww:get_i18n(wnet)
+m.title = wnet:get_i18n()
local iw = luci.sys.wifi.getiwinfo(arg[1])
@@ -276,394 +271,391 @@ end
----------------------- Interface -----------------------
-local wnet = ww:get_network(arg[2])
-
-if wnet then
- s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
- ifsection = s
- s.addremove = false
- s.anonymous = true
- s.defaults.device = arg[1]
-
- s:tab("general", translate("General Setup"))
- s:tab("encryption", translate("Wireless Security"))
- s:tab("macfilter", translate("MAC-Filter"))
- s:tab("advanced", translate("Advanced Settings"))
-
- s:taboption("general", Value, "ssid", translate("ESSID"))
-
- mode = s:taboption("general", ListValue, "mode", translate("Mode"))
- mode.override_values = true
- mode:value("ap", translate("Access Point"))
- mode:value("sta", translate("Client"))
- mode:value("adhoc", translate("Ad-Hoc"))
-
- bssid = s:taboption("general", Value, "bssid", translate("BSSID"))
-
- network = s:taboption("general", Value, "network", translate("Network"),
- translate("Choose the network you want to attach to this wireless interface. " ..
- "Select unspecified to not attach any network or fill out the " ..
- "create field to define a new network."))
-
- network.rmempty = true
- network.template = "cbi/network_netlist"
- network.widget = "radio"
-
- function network.write(self, section, value)
- local i = nw:get_interface(section)
- if i then
- if value == '-' then
- value = m:formvalue(self:cbid(section) .. ".newnet")
- if value and #value > 0 then
- local n = nw:add_network(value, {proto="none"})
- if n then n:add_interface(i) end
- else
- local n = i:get_network()
- if n then n:del_interface(i) end
- end
+s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
+ifsection = s
+s.addremove = false
+s.anonymous = true
+s.defaults.device = arg[1]
+
+s:tab("general", translate("General Setup"))
+s:tab("encryption", translate("Wireless Security"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
+
+s:taboption("general", Value, "ssid", translate("ESSID"))
+
+mode = s:taboption("general", ListValue, "mode", translate("Mode"))
+mode.override_values = true
+mode:value("ap", translate("Access Point"))
+mode:value("sta", translate("Client"))
+mode:value("adhoc", translate("Ad-Hoc"))
+
+bssid = s:taboption("general", Value, "bssid", translate("BSSID"))
+
+network = s:taboption("general", Value, "network", translate("Network"),
+ translate("Choose the network you want to attach to this wireless interface. " ..
+ "Select unspecified to not attach any network or fill out the " ..
+ "create field to define a new network."))
+
+network.rmempty = true
+network.template = "cbi/network_netlist"
+network.widget = "radio"
+
+function network.write(self, section, value)
+ local i = nw:get_interface(section)
+ if i then
+ if value == '-' then
+ value = m:formvalue(self:cbid(section) .. ".newnet")
+ if value and #value > 0 then
+ local n = nw:add_network(value, {proto="none"})
+ if n then n:add_interface(i) end
else
- local n = nw:get_network(value)
- if n then
- n:type("bridge")
- n:add_interface(i)
- end
+ local n = i:get_network()
+ if n then n:del_interface(i) end
+ end
+ else
+ local n = nw:get_network(value)
+ if n then
+ n:type("bridge")
+ n:add_interface(i)
end
end
end
+end
- -------------------- MAC80211 Interface ----------------------
+-------------------- MAC80211 Interface ----------------------
- if hwtype == "mac80211" then
- if fs.access("/usr/sbin/iw") then
- mode:value("mesh", "802.11s")
- end
+if hwtype == "mac80211" then
+ if fs.access("/usr/sbin/iw") then
+ mode:value("mesh", "802.11s")
+ end
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="adhoc"})
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ bssid:depends({mode="adhoc"})
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
end
-
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="ap-wds"})
end
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="ap-wds"})
+end
- -------------------- Madwifi Interface ----------------------
- if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
+-------------------- Madwifi Interface ----------------------
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
+if hwtype == "atheros" then
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+ mode:value("wds", translate("Static WDS"))
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
end
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
+
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
+ wdssep:depends({mode="ap-wds"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="ap-wds"})
+ hidden:depends({mode="sta-wds"})
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+ local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
+ swm:depends({mode="adhoc"})
+
+ local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+ nos:depends({mode="sta"})
+ nos:depends({mode="sta-wds"})
+
+ local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
+ probereq.enabled = "0"
+ probereq.disabled = "1"
+end
- -------------------- Broadcom Interface ----------------------
- if hwtype == "broadcom" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
+-------------------- Broadcom Interface ----------------------
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
+if hwtype == "broadcom" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- s:taboption("advanced", Flag, "doth", "802.11h")
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
- bssid:depends({mode="wds"})
- bssid:depends({mode="adhoc"})
- end
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ bssid:depends({mode="wds"})
+ bssid:depends({mode="adhoc"})
+end
- ----------------------- HostAP Interface ---------------------
- if hwtype == "prism2" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
+----------------------- HostAP Interface ---------------------
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
+if hwtype == "prism2" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="sta"})
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
+ bssid:depends({mode="sta"})
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- end
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+end
- ------------------- WiFI-Encryption -------------------
-
- encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
- encr.override_values = true
- encr.override_depends = true
- encr:depends({mode="ap"})
- encr:depends({mode="sta"})
- encr:depends({mode="adhoc"})
- encr:depends({mode="ahdemo"})
- encr:depends({mode="ap-wds"})
- encr:depends({mode="sta-wds"})
- encr:depends({mode="mesh"})
-
- encr:value("none", "No Encryption")
- encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
-
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- local supplicant = fs.access("/usr/sbin/wpa_supplicant")
- local hostapd = fs.access("/usr/sbin/hostapd")
-
- if hostapd and supplicant then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
- elseif hostapd and not supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- elseif not hostapd and supplicant then
- encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- else
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- end
- elseif hwtype == "broadcom" then
+
+------------------- WiFI-Encryption -------------------
+
+encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
+encr.override_values = true
+encr.override_depends = true
+encr:depends({mode="ap"})
+encr:depends({mode="sta"})
+encr:depends({mode="adhoc"})
+encr:depends({mode="ahdemo"})
+encr:depends({mode="ap-wds"})
+encr:depends({mode="sta-wds"})
+encr:depends({mode="mesh"})
+
+encr:value("none", "No Encryption")
+encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ local supplicant = fs.access("/usr/sbin/wpa_supplicant")
+ local hostapd = fs.access("/usr/sbin/hostapd")
+
+ if hostapd and supplicant then
encr:value("psk", "WPA-PSK")
encr:value("psk2", "WPA2-PSK")
- encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
+ elseif hostapd and not supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ elseif not hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
+ encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ else
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
end
+elseif hwtype == "broadcom" then
+ encr:value("psk", "WPA-PSK")
+ encr:value("psk2", "WPA2-PSK")
+ encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+end
- encr:depends("mode", "ap")
- encr:depends("mode", "sta")
- encr:depends("mode", "ap-wds")
- encr:depends("mode", "sta-wds")
- encr:depends("mode", "wds")
-
- server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
- server:depends({mode="ap", encryption="wpa"})
- server:depends({mode="ap", encryption="wpa2"})
- server:depends({mode="ap-wds", encryption="wpa"})
- server:depends({mode="ap-wds", encryption="wpa2"})
- server.rmempty = true
-
- port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
- port:depends({mode="ap", encryption="wpa"})
- port:depends({mode="ap", encryption="wpa2"})
- port:depends({mode="ap-wds", encryption="wpa"})
- port:depends({mode="ap-wds", encryption="wpa2"})
- port.rmempty = true
-
- key = s:taboption("encryption", Value, "key", translate("Key"))
- key:depends("encryption", "wep")
- key:depends("encryption", "psk")
- key:depends("encryption", "psk2")
- key:depends("encryption", "psk+psk2")
- key:depends("encryption", "psk-mixed")
- key:depends({mode="ap", encryption="wpa"})
- key:depends({mode="ap", encryption="wpa2"})
- key:depends({mode="ap-wds", encryption="wpa"})
- key:depends({mode="ap-wds", encryption="wpa2"})
- key.rmempty = true
- key.password = true
-
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
- nasid:depends({mode="ap", encryption="wpa"})
- nasid:depends({mode="ap", encryption="wpa2"})
- nasid:depends({mode="ap-wds", encryption="wpa"})
- nasid:depends({mode="ap-wds", encryption="wpa2"})
- nasid.rmempty = true
-
- eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
- eaptype:value("tls", "TLS")
- eaptype:value("ttls", "TTLS")
- eaptype:value("peap", "PEAP")
- eaptype:depends({mode="sta", encryption="wpa"})
- eaptype:depends({mode="sta", encryption="wpa2"})
-
- cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
- cacert:depends({mode="sta", encryption="wpa"})
- cacert:depends({mode="sta", encryption="wpa2"})
-
- privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
- privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
- privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
-
- privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
- privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
- privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
-
-
- auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
- auth:value("PAP")
- auth:value("CHAP")
- auth:value("MSCHAP")
- auth:value("MSCHAPV2")
- auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
- auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
-
-
- identity = s:taboption("encryption", Value, "identity", translate("Identity"))
- identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
- identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
-
- password = s:taboption("encryption", Value, "password", translate("Password"))
- password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
- password:depends({mode="sta", eap_type="peap", encryption="wpa"})
- password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
- password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
- end
+encr:depends("mode", "ap")
+encr:depends("mode", "sta")
+encr:depends("mode", "ap-wds")
+encr:depends("mode", "sta-wds")
+encr:depends("mode", "wds")
+
+server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
+server:depends({mode="ap", encryption="wpa"})
+server:depends({mode="ap", encryption="wpa2"})
+server:depends({mode="ap-wds", encryption="wpa"})
+server:depends({mode="ap-wds", encryption="wpa2"})
+server.rmempty = true
+
+port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
+port:depends({mode="ap", encryption="wpa"})
+port:depends({mode="ap", encryption="wpa2"})
+port:depends({mode="ap-wds", encryption="wpa"})
+port:depends({mode="ap-wds", encryption="wpa2"})
+port.rmempty = true
+
+key = s:taboption("encryption", Value, "key", translate("Key"))
+key:depends("encryption", "wep-open")
+key:depends("encryption", "wep-shared")
+key:depends("encryption", "psk")
+key:depends("encryption", "psk2")
+key:depends("encryption", "psk+psk2")
+key:depends("encryption", "psk-mixed")
+key:depends({mode="ap", encryption="wpa"})
+key:depends({mode="ap", encryption="wpa2"})
+key:depends({mode="ap-wds", encryption="wpa"})
+key:depends({mode="ap-wds", encryption="wpa2"})
+key.rmempty = true
+key.password = true
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+ nasid:depends({mode="ap", encryption="wpa"})
+ nasid:depends({mode="ap", encryption="wpa2"})
+ nasid:depends({mode="ap-wds", encryption="wpa"})
+ nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid.rmempty = true
+
+ eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
+ eaptype:value("tls", "TLS")
+ eaptype:value("ttls", "TTLS")
+ eaptype:value("peap", "PEAP")
+ eaptype:depends({mode="sta", encryption="wpa"})
+ eaptype:depends({mode="sta", encryption="wpa2"})
+
+ cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
+ cacert:depends({mode="sta", encryption="wpa"})
+ cacert:depends({mode="sta", encryption="wpa2"})
+
+ privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+ privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+
+ auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
+ auth:value("PAP")
+ auth:value("CHAP")
+ auth:value("MSCHAP")
+ auth:value("MSCHAPV2")
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+
+ identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+ password = s:taboption("encryption", Value, "password", translate("Password"))
+ password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
end
return m
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
index 327f24e4fd9a93427c22fdd555138cf6b4b42b97..c16743ddcb633995edb9c840659f868bb5290ff1 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi_add.lua
@@ -14,7 +14,6 @@ $Id$
local nw = require "luci.model.network"
local fw = require "luci.model.firewall"
-local wl = require "luci.model.wireless"
local uci = require "luci.model.uci".cursor()
local http = require "luci.http"
@@ -34,7 +33,6 @@ end
nw.init(uci)
fw.init(uci)
-wl.init(uci)
m.hidden = {
device = http.formvalue("device"),
@@ -145,14 +143,15 @@ function attachnet.parse(self, section)
if not net then
self.error = { [section] = "missing" }
else
- local wdev = wl:get_device(m.hidden.device)
- wdev:disabled(false)
- wdev:channel(m.hidden.channel)
+ local wdev = nw:get_wifidev(m.hidden.device)
+
+ wdev:set("disabled", false)
+ wdev:set("channel", m.hidden.channel)
if replace:formvalue(section) then
local n
- for _, n in ipairs(wdev:get_networks()) do
- wl:del_network(n:name())
+ for _, n in ipairs(wdev:get_wifinets()) do
+ wdev:del_wifinet(n)
end
end
@@ -177,8 +176,7 @@ function attachnet.parse(self, section)
wconf.bssid = m.hidden.bssid
end
- local wnet = wl:add_network(wconf)
-
+ local wnet = wdev:add_wifinet(wconf)
if wnet then
if zone then
fw:del_network(net:name())