- 08 2月, 2007 6 次提交
-
-
由 Sergei Shtylyov 提交于
Continue with the driver rewrite: - move the interrupt twiddling code from the speedproc handlers into the init_hwif_hpt366 which allows to merge the two HPT37x speedproc handlers into one; - get rid of in init_hpt366 which solely consists of the duplicate code, then fold init_hpt37x() into init_chipset_hpt366(); - fix hpt3xx_tune_drive() to always set the PIO mode requested, not the best possible one, change hpt366_config_drive_xfer_rate() accordingly, simplify it a bit; - group all the DMA related code together init_hwif_hpt366(), and generally clean up and beautify it. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Begin the real driver redesign. For the starters: - cache the offset of the IDE channel's MISC. control registers which are used throughout the driver in hwif->select_data; - only touch the relevant MCR when detecting the cable type on HPT374's function 1; - make HPT36x's speedproc handler look the same way as HPT37x ones; fix the PIO timing register mask for HPT37x. - rename all the HPT3xx register related variables consistently; clean up the whitespace. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips -- there's no need for the driver itself to walk the list of the PCI devices, and it also forgets to check the bus number of the device found. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
- Rework the driver setup code so that it prefixes the driver startup messages with the real chip name. - Print the measured f_CNT value and the DPLL setting for non-HPT3xx chips as well. - Claim the extra 240 bytes of I/O space for all chips, not only for those having PCI device ID of 0x0004. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Andrew Morton 提交于
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
- Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former returns the max. mode computed at the load time and doesn't have to do bad Ultra33 drive list lookups anymore; remove the duplicate code from the latter function. Move the quirky drive list lookup into hpt3xx_quirkproc() where it should have been from the start... - Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock being used does not allow for it, and this *greatly* increases the transfer speed. - Save some space by using byte-wide fields in struct hpt_info; switch to reading the 8-bit PCI revision ID reg. only, not the whole 32-bit reg. - Start incrementing the driver version number with each patch (should have been done from the first one posted). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 07 2月, 2007 34 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] swiotlb abstraction (e.g. for Xen) [IA64] swiotlb cleanup [IA64] make swiotlb use bus_to_virt/virt_to_bus [IA64] swiotlb bug fixes [IA64] Hook up getcpu system call for IA64 [IA64] clean up sparsemem memory_present call [IA64] show_mem() for IA64 sparsemem NUMA [IA64] missing exports hwsw_sync_... [IA64] virt_to_page() can be called with NULL arg [IA64] alignment bug in ldscript [IA64] register memory ranges in a consistent manner [IA64] Enable SWIOTLB only when needed [IA64-SGI] Check for TIO errors on shub2 Altix [IA64] remove bogus prototype ia64_esi_init() [IA64] Clear IRQ affinity when unregistered [IA64] fix ACPI Kconfig issues [IA64] Fix NULL-pointer dereference in ia64_machine_kexec() [IA64] find thread for user rbs address [IA64] use snprintf() on features field of /proc/cpuinfo [IA64] enable singlestep on system call ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: ocfs2_link() journal credits update
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: handle multi-interface devices for Apple macbook pro properly HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG USB HID: fix bogus comment in hid_get_class_descriptor() USB HID: remove hid_find_field_by_usage() HID: API - fix leftovers of hidinput API in USB HID HID: hid debug from hid-debug.h to hid layer hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter hid: quirk for multi-input devices with unneeded output reports hid: allow force feedback for multi-input devices
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Remove obsolete prototypes IB/ehca: Remove use of do_mmap() RDMA/addr: Handle ethernet neighbour updates during route resolution IB: Make sure struct ib_user_mad.data is aligned IB/srp: Don't wait for response when QP is in error state. IB: Return qp pointer as part of ib_wc IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits) mmc: tifm: replace kmap with page_address mmc: sdhci: fix voltage ocr mmc: sdhci: replace kmap with page_address mmc: wbsd: replace kmap with page_address mmc: handle pci_enable_device() return value in sdhci mmc: Proper unclaim in mmc_block mmc: change wbsd mailing list mmc: Graceful fallback for fancy features mmc: Handle wbsd's stupid command list mmc: Allow host drivers to specify max block count mmc: Allow host drivers to specify a max block size tifm_sd: add suspend and resume functionality tifm_core: add suspend/resume infrastructure for tifm devices tifm_7xx1: prettify tifm_7xx1: recognize device 0xac8f as supported tifm_7xx1: switch from workqueue to kthread tifm_7xx1: Merge media insert and media remove functions tifm_7xx1: simplify eject function Add dummy_signal_irq function to save check in ISR Remove unused return value from signal_irq callback ...
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits) [S390] Avoid excessive inlining. [S390] Mark kernel text section read-only. [S390] Convert memory detection into C code. [S390] Calibrate delay and bogomips. [S390] Hypervisor filesystem (s390_hypfs) for z/VM [S390] Add crypto support for 3592 tape devices [S390] boot from NSS support [S390] Support for s390 Pseudo Random Number Generator [S390] ETR support. [S390] noexec protection [S390] move crypto options and some cleanup. [S390] cio: Don't spam debug feature. [S390] Cleanup of CHSC event handling. [S390] cio: declare hardware structures packed. [S390] Add set_fs(USER_DS) to start_thread(). [S390] cio: Catch operand exceptions on stsch. [S390] Fix register usage description. [S390] kretprobe_trampoline_holder() in wrong section. [S390] Fix kprobes breakpoint handling. [S390] Update maintainers file. ...
-
由 David Howells 提交于
Fix the key serial number collision avoidance code in key_alloc_serial(). This didn't use to be so much of a problem as the key serial numbers were allocated from a simple incremental counter, and it would have to go through two billion keys before it could possibly encounter a collision. However, now that random numbers are used instead, collisions are much more likely. This is fixed by finding a hole in the rbtree where the next unused serial number ought to be and using that by going almost back to the top of the insertion routine and redoing the insertion with the new serial number rather than trying to be clever and attempting to work out the insertion point pointer directly. This fixes kernel BZ #7727. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Minor cleanup [CIFS] Missing free in error path [CIFS] Reduce cifs stack space usage [CIFS] lseek polling returned stale EOF
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits) [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro [MIPS] Fix warnings in run_uncached on 32bit kernel [MIPS] Comment fix [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype. [MIPS] Alchemy: Fix PCI-memory access [MIPS] Move .set reorder out of conditional code [MIPS] Check FCSR for pending interrupts before restoring from a context. [MIPS] Jaguar ATX: Fix large number of warnings. [MIPS] Jaguar: Fix MAC address detection after platform_device conversion. [MIPS] SMTC: Make a bunch of functions and variables static. [MIPS] Use compat_sys_pselect6 [MIPS] SMTC: Cleanup idle hook invocation. [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity [MIPS] IRIX: Linux coding style cleanups. [MIPS] PB1100: Fix pile of warnings [MIPS] Alchemy: Fix bunch of warnings [MIPS] Whitespace cleanups. [MIPS] Alchemy: Fix bunch more warnings. [MIPS] Use ARRAY_SIZE macro when appropriate [MIPS] Fix some whitespace damage ...
-
由 Oleg Verych 提交于
Tildes as in path as in filenames are handled correctly now: only files, containing tilde '~', are backups, thus are not valid. [KJ]: Definition of `space' was removed, scripts/Kbuild.include has one. That definition was taken right from the GNU make manual, while Kbuild's version is original. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
GNU binutils, root users, tmpfiles, external modules ro builds must be fixed to do the right thing now. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Horst Schirmeier <horst@schirmeier.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Daniel Drake <dsd@gentoo.org> Cc: Andi Kleen <ak@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Verych 提交于
Replacing overhead of using some (external) programs instead of good old `sh'. Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: William Stearns <wstearns@pobox.com> Cc: Martin Schlemmer <azarah@nosferatu.za.org> Signed-off-by: NOleg Verych <olecom@flower.upol.cz> Acked-by: NMark Lord <lkml@rtr.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steve French 提交于
Missing tab. Missing entry in changelog Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
arch/mips/lib/uncached.c: In function 'run_uncached': arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexander Bigga 提交于
The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: NAlexander Bigga <ab@mycable.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joseph S. Myers 提交于
The N32 and O32 pselect6 syscalls need to use compat_sys_pselect6 to translate arguments from 32-bit to 64-bit layout. Signed-off-by: NJoseph Myers <joseph@codesourcery.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Quigley 提交于
This patch adds LSM hooks into the setaffinity and getaffinity functions for the mips architecture to enable security modules to control these operations between tasks with different security attributes. This implementation uses the existing task_setscheduler and task_getscheduler LSM hooks. Signed-Off-By: NDavid Quigley <dpquigl@tycho.nsa.gov> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
CC arch/mips/au1000/pb1100/board_setup.o arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’: arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’ arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’ arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’ Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
CC arch/mips/au1000/common/pci.o arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’: arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ahmed S. Darwish 提交于
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Jan Altenberg 提交于
Signed-off-by: NJan Altenberg <jan@linutronix.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mathieu Desnoyers 提交于
early_serial_setup is only defined when CONFIG_SERIAL_8250 is set. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-