提交 ed919b01 编写于 作者: O Ohad Ben-Cohen 提交者: Chris Ball

mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD

Some board/card/host configurations are not capable of powering off the
card after boot.

To support such configurations, and to allow smoother transition to
runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to
explicitly indicate whether it's OK to power off their cards after boot.

SDIO core will enable runtime PM for a card only if that cap is set.
As a result, the card will be powered down after boot, and will only
be powered up again when a driver is loaded (and then it's up to the
driver to decide whether power will be kept or not).

This will prevent sdio_bus_probe() failures with setups that do not
support powering off the card.
Reported-and-tested-by: NDaniel Drake <dsd@laptop.org>
Reported-and-tested-by: NArnd Hannemann <arnd@arndnet.de>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 4d0812c3
......@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
BUG_ON(!host->card);
/* Make sure card is powered before detecting it */
err = pm_runtime_get_sync(&host->card->dev);
if (err < 0)
goto out;
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
err = pm_runtime_get_sync(&host->card->dev);
if (err < 0)
goto out;
}
mmc_claim_host(host);
......@@ -571,7 +573,8 @@ static void mmc_sdio_detect(struct mmc_host *host)
* is about to show up at this point, the _sync variant is
* desirable anyway.
*/
pm_runtime_put_sync(&host->card->dev);
if (host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_sync(&host->card->dev);
out:
if (err) {
......@@ -728,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
card = host->card;
/*
* Let runtime PM core know our card is active
* Enable runtime PM only if supported by host+card+board
*/
err = pm_runtime_set_active(&card->dev);
if (err)
goto remove;
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
/*
* Let runtime PM core know our card is active
*/
err = pm_runtime_set_active(&card->dev);
if (err)
goto remove;
/*
* Enable runtime PM for this card
*/
pm_runtime_enable(&card->dev);
/*
* Enable runtime PM for this card
*/
pm_runtime_enable(&card->dev);
}
/*
* The number of functions on the card is encoded inside
......@@ -755,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
goto remove;
/*
* Enable Runtime PM for this func
* Enable Runtime PM for this func (if supported)
*/
pm_runtime_enable(&card->sdio_func[i]->dev);
if (host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_enable(&card->sdio_func[i]->dev);
}
mmc_release_host(host);
......
......@@ -17,6 +17,7 @@
#include <linux/pm_runtime.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio_func.h>
#include "sdio_cis.h"
......@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
* it should call pm_runtime_put_noidle() in its probe routine and
* pm_runtime_get_noresume() in its remove routine.
*/
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto out;
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto out;
}
/* Set the default block size so the driver is sure it's something
* sensible. */
......@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
return 0;
disable_runtimepm:
pm_runtime_put_noidle(dev);
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
out:
return ret;
}
......@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
{
struct sdio_driver *drv = to_sdio_driver(dev->driver);
struct sdio_func *func = dev_to_sdio_func(dev);
int ret;
int ret = 0;
/* Make sure card is powered before invoking ->remove() */
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto out;
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto out;
}
drv->remove(func);
......@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
}
/* First, undo the increment made directly above */
pm_runtime_put_noidle(dev);
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
/* Then undo the runtime PM settings in sdio_bus_probe() */
pm_runtime_put_noidle(dev);
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_noidle(dev);
out:
return ret;
......@@ -191,6 +199,8 @@ static int sdio_bus_remove(struct device *dev)
static int sdio_bus_pm_prepare(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
/*
* Resume an SDIO device which was suspended at run time at this
* point, in order to allow standard SDIO suspend/resume paths
......@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
* since there is little point in failing system suspend if a
* device can't be resumed.
*/
pm_runtime_resume(dev);
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_resume(dev);
return 0;
}
......
......@@ -168,6 +168,7 @@ struct mmc_host {
/* DDR mode at 1.8V */
#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */
/* DDR mode at 1.2V */
#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */
mmc_pm_flag_t pm_caps; /* supported pm features */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册