Skip to content

B
Bluefield Linux

mellanox / Bluefield Linux
12 个月 前同步成功

通知 3
Star 0
Fork 0
B
Bluefield Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 34101237 编写于 作者: U Uwe Kleine-König
浏览文件
操作

imx: define per SOC ..._PHYS_OFFSET and use these in favour of PHYS_OFFSET 

This is a further step in allowing to build a kernel image for more
than one imx SOC.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
上级 7fc06d8c
隐藏空白更改
内联 并排
Showing with 44 addition and 38 deletion
arch/arm/mach-mx1/mach-mx1ads.c
浏览文件 @ 34101237
...@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") ...@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */ /* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = IMX_IO_PHYS, .phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io, .map_io = mx1_map_io,
.init_irq = mx1_init_irq, .init_irq = mx1_init_irq,
.timer = &mx1ads_timer, .timer = &mx1ads_timer,
...@@ -157,7 +157,7 @@ MACHINE_END ...@@ -157,7 +157,7 @@ MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS") MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS, .phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc, .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io, .map_io = mx1_map_io,
.init_irq = mx1_init_irq, .init_irq = mx1_init_irq,
.timer = &mx1ads_timer, .timer = &mx1ads_timer,
......
arch/arm/mach-mx2/mach-cpuimx27.c
浏览文件 @ 34101237
...@@ -226,7 +226,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { ...@@ -226,7 +226,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = eukrea_cpuimx27_init, .init_machine = eukrea_cpuimx27_init,
......
arch/arm/mach-mx2/mach-imx27lite.c
浏览文件 @ 34101237
...@@ -87,7 +87,7 @@ static struct sys_timer mx27lite_timer = { ...@@ -87,7 +87,7 @@ static struct sys_timer mx27lite_timer = {
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = mx27lite_init, .init_machine = mx27lite_init,
......
arch/arm/mach-mx2/mach-mx21ads.c
浏览文件 @ 34101237
...@@ -286,7 +286,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") ...@@ -286,7 +286,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */ /* maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX21_AIPI_BASE_ADDR, .phys_io = MX21_AIPI_BASE_ADDR,
.io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX21_PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io, .map_io = mx21ads_map_io,
.init_irq = mx21_init_irq, .init_irq = mx21_init_irq,
.init_machine = mx21ads_board_init, .init_machine = mx21ads_board_init,
......
arch/arm/mach-mx2/mach-mx27_3ds.c
浏览文件 @ 34101237
...@@ -87,7 +87,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") ...@@ -87,7 +87,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */ /* maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = mx27pdk_init, .init_machine = mx27pdk_init,
......
arch/arm/mach-mx2/mach-mx27ads.c
浏览文件 @ 34101237
...@@ -336,7 +336,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") ...@@ -336,7 +336,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */ /* maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io, .map_io = mx27ads_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = mx27ads_board_init, .init_machine = mx27ads_board_init,
......
arch/arm/mach-mx2/mach-mxt_td60.c
浏览文件 @ 34101237
...@@ -286,7 +286,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") ...@@ -286,7 +286,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */ /* maintainer: Maxtrack Industrial */
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = mxt_td60_board_init, .init_machine = mxt_td60_board_init,
......
arch/arm/mach-mx2/mach-pca100.c
浏览文件 @ 34101237
...@@ -235,7 +235,7 @@ static struct sys_timer pca100_timer = { ...@@ -235,7 +235,7 @@ static struct sys_timer pca100_timer = {
MACHINE_START(PCA100, "phyCARD-i.MX27") MACHINE_START(PCA100, "phyCARD-i.MX27")
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = pca100_init, .init_machine = pca100_init,
......
arch/arm/mach-mx2/mach-pcm038.c
浏览文件 @ 34101237
...@@ -328,7 +328,7 @@ static struct sys_timer pcm038_timer = { ...@@ -328,7 +328,7 @@ static struct sys_timer pcm038_timer = {
MACHINE_START(PCM038, "phyCORE-i.MX27") MACHINE_START(PCM038, "phyCORE-i.MX27")
.phys_io = MX27_AIPI_BASE_ADDR, .phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io, .map_io = mx27_map_io,
.init_irq = mx27_init_irq, .init_irq = mx27_init_irq,
.init_machine = pcm038_init, .init_machine = pcm038_init,
......
arch/arm/mach-mx25/mx25pdk.c
浏览文件 @ 34101237
...@@ -110,7 +110,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") ...@@ -110,7 +110,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */ /* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX25_AIPS1_BASE_ADDR, .phys_io = MX25_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX25_PHYS_OFFSET + 0x100,
.map_io = mx25_map_io, .map_io = mx25_map_io,
.init_irq = mx25_init_irq, .init_irq = mx25_init_irq,
.init_machine = mx25pdk_init, .init_machine = mx25pdk_init,
......
arch/arm/mach-mx3/mach-armadillo5x0.c
浏览文件 @ 34101237
...@@ -408,7 +408,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") ...@@ -408,7 +408,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */ /* Maintainer: Alberto Panizzo */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io, .map_io = mx31_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer, .timer = &armadillo5x0_timer,
......
arch/arm/mach-mx3/mach-kzm_arm11_01.c
浏览文件 @ 34101237
...@@ -265,7 +265,7 @@ static struct sys_timer kzm_timer = { ...@@ -265,7 +265,7 @@ static struct sys_timer kzm_timer = {
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = kzm_map_io, .map_io = kzm_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = kzm_board_init, .init_machine = kzm_board_init,
......
arch/arm/mach-mx3/mach-mx31_3ds.c
浏览文件 @ 34101237
...@@ -258,7 +258,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") ...@@ -258,7 +258,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */ /* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io, .map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-mx31ads.c
浏览文件 @ 34101237
...@@ -537,7 +537,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") ...@@ -537,7 +537,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */ /* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io, .map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq, .init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-mx31lilly.c
浏览文件 @ 34101237
...@@ -197,7 +197,7 @@ static struct sys_timer mx31lilly_timer = { ...@@ -197,7 +197,7 @@ static struct sys_timer mx31lilly_timer = {
MACHINE_START(LILLY1131, "INCO startec LILLY-1131") MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io, .map_io = mx31_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init, .init_machine = mx31lilly_board_init,
......
arch/arm/mach-mx3/mach-mx31lite.c
浏览文件 @ 34101237
...@@ -289,7 +289,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") ...@@ -289,7 +289,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */ /* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io, .map_io = mx31lite_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-mx31moboard.c
浏览文件 @ 34101237
...@@ -571,7 +571,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") ...@@ -571,7 +571,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */ /* Maintainer: Valentin Longchamp, EPFL Mobots group */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io, .map_io = mx31_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-mx35pdk.c
浏览文件 @ 34101237
...@@ -108,7 +108,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") ...@@ -108,7 +108,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */ /* Maintainer: Freescale Semiconductor, Inc */
.phys_io = MX35_AIPS1_BASE_ADDR, .phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io, .map_io = mx35_map_io,
.init_irq = mx35_init_irq, .init_irq = mx35_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-pcm037.c
浏览文件 @ 34101237
...@@ -638,7 +638,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") ...@@ -638,7 +638,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */ /* Maintainer: Pengutronix */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io, .map_io = mx31_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-pcm043.c
浏览文件 @ 34101237
...@@ -250,7 +250,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") ...@@ -250,7 +250,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */ /* Maintainer: Pengutronix */
.phys_io = MX35_AIPS1_BASE_ADDR, .phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx35_map_io, .map_io = mx35_map_io,
.init_irq = mx35_init_irq, .init_irq = mx35_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mach-qong.c
浏览文件 @ 34101237
...@@ -275,7 +275,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") ...@@ -275,7 +275,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */ /* Maintainer: DENX Software Engineering GmbH */
.phys_io = MX31_AIPS1_BASE_ADDR, .phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io, .map_io = mx31_map_io,
.init_irq = mx31_init_irq, .init_irq = mx31_init_irq,
.init_machine = mxc_board_init, .init_machine = mxc_board_init,
......
arch/arm/mach-mxc91231/magx-zn5.c
浏览文件 @ 34101237
...@@ -55,7 +55,7 @@ struct sys_timer zn5_timer = { ...@@ -55,7 +55,7 @@ struct sys_timer zn5_timer = {
MACHINE_START(MAGX_ZN5, "Motorola Zn5") MACHINE_START(MAGX_ZN5, "Motorola Zn5")
.phys_io = MXC91231_AIPS1_BASE_ADDR, .phys_io = MXC91231_AIPS1_BASE_ADDR,
.io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .io_pg_offst = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100, .boot_params = MXC91231_PHYS_OFFSET + 0x100,
.map_io = mxc91231_map_io, .map_io = mxc91231_map_io,
.init_irq = mxc91231_init_irq, .init_irq = mxc91231_init_irq,
.timer = &zn5_timer, .timer = &zn5_timer,
......
arch/arm/plat-mxc/include/mach/memory.h
浏览文件 @ 34101237
...@@ -11,21 +11,27 @@ ...@@ -11,21 +11,27 @@
#ifndef __ASM_ARCH_MXC_MEMORY_H__ #ifndef __ASM_ARCH_MXC_MEMORY_H__
#define __ASM_ARCH_MXC_MEMORY_H__ #define __ASM_ARCH_MXC_MEMORY_H__
#if defined CONFIG_ARCH_MX1 #define MX1_PHYS_OFFSET UL(0x08000000)
#define PHYS_OFFSET UL(0x08000000) #define MX21_PHYS_OFFSET UL(0xc0000000)
#elif defined CONFIG_ARCH_MX2 #define MX25_PHYS_OFFSET UL(0x80000000)
#ifdef CONFIG_MACH_MX21 #define MX27_PHYS_OFFSET UL(0xa0000000)
#define PHYS_OFFSET UL(0xC0000000) #define MX3x_PHYS_OFFSET UL(0x80000000)
#endif #define MXC91231_PHYS_OFFSET UL(0x90000000)
#ifdef CONFIG_MACH_MX27
#define PHYS_OFFSET UL(0xA0000000) #if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
#endif # if defined CONFIG_ARCH_MX1
#elif defined CONFIG_ARCH_MX3 # define PHYS_OFFSET MX1_PHYS_OFFSET
#define PHYS_OFFSET UL(0x80000000) # elif defined CONFIG_MACH_MX21
#elif defined CONFIG_ARCH_MX25 # define PHYS_OFFSET MX21_PHYS_OFFSET
#define PHYS_OFFSET UL(0x80000000) # elif defined CONFIG_ARCH_MX25
#elif defined CONFIG_ARCH_MXC91231 # define PHYS_OFFSET MX25_PHYS_OFFSET
#define PHYS_OFFSET UL(0x90000000) # elif defined CONFIG_MACH_MX27
# define PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
# define PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
# define PHYS_OFFSET MXC91231_PHYS_OFFSET
# endif
#endif #endif
#if defined(CONFIG_MX1_VIDEO) #if defined(CONFIG_MX1_VIDEO)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或