提交 058b7a6f 编写于 作者: H Holger Schurig 提交者: Sascha Hauer

arm/imx2x: removes a bunch of sparse-warnings

Here are some of the warnings that get fixed by this:

> 200 times: warning: cast adds address space to expression (<asn:2>)
twelve times: warning: symbol 'xxx' was not declared. Should it be static
two times: warning: symbol 'clock' shadows an earlier one
five times: warning: incorrect type in initializer (different address spaces)
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 edfcea80
......@@ -34,6 +34,9 @@
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include "devices.h"
/*
* Resource definition for the MXC IrDA
......@@ -230,32 +233,32 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
.base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
},
[1] = {
.chip.label = "gpio-1",
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
},
[2] = {
.chip.label = "gpio-2",
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
},
[3] = {
.chip.label = "gpio-3",
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
},
[4] = {
.chip.label = "gpio-4",
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
},
[5] = {
.chip.label = "gpio-5",
.base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
}
};
......
......@@ -21,6 +21,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
......
......@@ -266,7 +266,7 @@ static void __init mx27ads_timer_init(void)
mx27_clocks_init(fref);
}
struct sys_timer mx27ads_timer = {
static struct sys_timer mx27ads_timer = {
.init = mx27ads_timer_init,
};
......@@ -279,7 +279,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
},
};
void __init mx27ads_map_io(void)
static void __init mx27ads_map_io(void)
{
mxc_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
......
......@@ -233,7 +233,7 @@ static void __init pcm038_timer_init(void)
mx27_clocks_init(26000000);
}
struct sys_timer pcm038_timer = {
static struct sys_timer pcm038_timer = {
.init = pcm038_timer_init,
};
......
......@@ -22,6 +22,7 @@
#include <linux/serial.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include "devices.h"
static struct resource uart0[] = {
{
......
......@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/common.h>
int __init mxc_register_device(struct platform_device *pdev, void *data)
{
......
......@@ -48,7 +48,8 @@
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xEB000000
#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
/*
* PBC Interupt name definitions
......
......@@ -129,7 +129,7 @@
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
(void __iomem *) \
(void __force __iomem *) \
(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
AIPI_IO_ADDRESS(x) : \
((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
......
......@@ -52,11 +52,9 @@ static struct clocksource clocksource_mxc = {
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int clock;
unsigned int c = clk_get_rate(timer_clk);
clock = clk_get_rate(timer_clk);
clocksource_mxc.mult = clocksource_hz2mult(clock,
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
......@@ -176,11 +174,9 @@ static struct clock_event_device clockevent_mxc = {
static int __init mxc_clockevent_init(struct clk *timer_clk)
{
unsigned int clock;
clock = clk_get_rate(timer_clk);
unsigned int c = clk_get_rate(timer_clk);
clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册