update README

README.md

@@ -39,18 +39,18 @@ keep other settings default.
 
 If it's the first time your nuc10 install with macOS, you must unlock CFG before install macOS.
 
- 1. Find a USB flash drive, formatted as `FAT32` partition.
- 2. Copy `EFI` files to the root of your USB drive, path will be `/EFI`.
- 3. Reboot your nuc10, press `F10`, boot with the drive above. 
- 4. Choose `CFGLock Shell.efi` unlock CFG. 
+1. Find a USB flash drive, formatted as `FAT32` partition.
+2. Copy `EFI` files to the root of your USB drive, path will be `/EFI`.
+3. Reboot your nuc10, press `F10`, boot with the drive above. 
+4. Choose `CFGLock Shell.efi` unlock CFG. 
 
 
 ### config.plist
 
-- `/EFI/OC/config.plist` Default boot with `AppleALC.kext`.
-- `/EFI/OC/config.VoodooHDA.plist` Default boot with `VoodooHDA.kext`(HDMI Audio works).
-- `/EFI/OC/config.UI.plist` GUI boot with `AppleALC.kext`.
-- `/EFI/OC/config.UI.VoodooHDA.plist` GUI boot with `VoodooHDA.kext`(HDMI Audio works).
+1. `/EFI/OC/config.plist` Default boot with `AppleALC.kext`.
+2. `/EFI/OC/config.VoodooHDA.plist` Default boot with `VoodooHDA.kext`(HDMI Audio works).
+3. `/EFI/OC/config.UI.plist` GUI boot with `AppleALC.kext`.
+4. `/EFI/OC/config.UI.VoodooHDA.plist` GUI boot with `VoodooHDA.kext`(HDMI Audio works).
 
 Choose one you prefer to :)   
 
@@ -66,8 +66,8 @@ Choose one you prefer to :)
 
 ### HDMI Audio
 
- - The default Audio drive is `AppleALC.kext` loaded by the file `/EFI/OC/config.plist`.
- - If you want to use `VoodooHDA.kext`, just rename the file `/EFI/OC/config.VoodooHDA.plist` to `/EFI/OC/config.plist`. (Do not forget to replace the GMBIOS with your own.)
+- The default Audio drive is `AppleALC.kext` loaded by the file `/EFI/OC/config.plist`.
+- If you want to use `VoodooHDA.kext`, just rename the file `/EFI/OC/config.VoodooHDA.plist` to `/EFI/OC/config.plist`. (Do not forget to replace the GMBIOS with your own.)
 
 
 ### Kexts

README.zh_CN.md

@@ -37,22 +37,22 @@
 
 新机器或之前未安装过 macOS 的机器，需要解锁CFGLock，具体步骤如下：
 
- 1. 找一个U盘，格式化为 `FAT32` 分区
- 2. 下载 `EFI` 文件，解压放到U盘根目录。（注意包含EFI目录）
- 3. 将U盘插入NUC，重启，按`F10`，选择从刚才放入 `EFI` 文件的那个U盘启动 
- 4. 选择 `CFGLock Shell.efi` 选择回车，进行解锁。
+1. 找一个U盘，格式化为 `FAT32` 分区
+2. 下载 `EFI` 文件，解压放到U盘根目录。（注意包含EFI目录）
+3. 将U盘插入NUC，重启，按`F10`，选择从刚才放入 `EFI` 文件的那个U盘启动 
+4. 选择 `CFGLock Shell.efi` 选择回车，进行解锁。
 
 注意：若在OC引导界面看不到 `CFGLock Shell.efi` ，按`空格键`即可显示。
 
 
 ### config.plist
 
-1. `/EFI/OC/config.plist` 默认文本启动模式，声卡驱动为 `AppleALC.kext`，有些时间HDMI音频不能正常工作.
-2. `/EFI/OC/config.VoodooHDA.plist` 默认文本启动模式，万能声卡驱动 `VoodooHDA.kext`(HDMI音频可以正常工作，内置麦克风也可以工作).
+1. `/EFI/OC/config.plist` 默认文本启动模式，声卡驱动为 `AppleALC.kext`，有些情况下 HDMI 音频不能正常工作.
+2. `/EFI/OC/config.VoodooHDA.plist` 默认文本启动模式，万能声卡驱动 `VoodooHDA.kext`(HDMI音频可以正常工作，内置麦克风也可以正常工作).
 3. `/EFI/OC/config.UI.plist` 图形界面启动模式，声卡驱动为 `AppleALC.kext`.
 4. `/EFI/OC/config.UI.VoodooHDA.plist` 图形界面启动模式，万能声卡驱动 `VoodooHDA.kext`.
 
-选择你自己喜欢的启动方式，替换掉 `config.plist` 即可。
+选择你自己喜欢的启动方式，替换掉 `config.plist` 即可。   
 **在 OC 引导界面，按 `空格键` 可显示辅助功能**