* [add]修正上手指南

* [add]修正上手指南与重新配置rtconfig.h

* [RT1060][SPI]添加SPI支持，并完善RW007支持

* sync and update

更新的SDK2.12.1更新imxrt1060的驱动

* Synchronize the code of the rt mart branch to the master branch.
  * TTY device
  * Add lwP code from rt-smart
  * Add vnode in DFS, but DFS will be re-write for rt-smart
  * There are three libcpu for rt-smart:
    * arm/cortex-a, arm/aarch64
    * riscv64
Co-authored-by: NRbb666 <zhangbingru@rt-thread.com>
Co-authored-by: Nzhkag <zhkag@foxmail.com>

* Update Kconfig

增加RT1170双路网络选项

* Update SConscript

增加RTL8211F驱动选项支持

* Update SConstruct

去掉外设目录

* Add files via upload

增加PHY芯片RTL8211F驱动

* Update drv_rtl8211f.c

* format code
Co-authored-by: Meco Man <920369182@qq.com>

* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes

* [lvgl] remove specific suppport for imxrt1060
https://github.com/lvgl/lvgl/pull/3566

this is report in slack group:
- I had to do a small fix in board/linker_scripts/link.lds file.
line 81, should be:
ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data);
(add a space between ivt_begin and "=“).

- For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig
Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.

Added LCD Touch Int pin to ioconfig. During testing GT911 would not come out of reset because INT pin could not be driven low or high.

* 优化imxrt的BSP下面的applications的Sconsript脚本

* add import os for sconscript in imxrt

Fix BSP bugs:
-Added Touch INT GPIO Init code to pin_mux.c
-Added new delay code for touch/video driver, using the rt-thread delay, in touchpad.c/.h

将路径更新为IAR最新版本的路径

因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链
此外，将判断条件改为列表方式，这样更方便后续增加其他可能的IAR编译链

Signed-off-by: NTing Liu <ting.liu@nxp.com>

Test with Keil MDK 5.36, Compiler V6.16
Signed-off-by: NTing Liu <ting.liu@nxp.com>

* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM

* 添加 imxrt1060-evk BSP

* add LVGL

* add README.md

* Delete irrelevant files

* Modify the optimization level to O1

* Organize documents

* Source code formatting