Skip to content

R
rt-thread

失败笔记本 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 1d1f272f 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #2340 from jinsheng20/stm32f746_disco 

Stm32f746 disco
上级 6a150c09 a2ed7ec6
隐藏空白更改
内联 并排
Showing with 1005 addition and 105 deletion
bsp/stm32/stm32f746-st-disco/.config
浏览文件 @ 1d1f272f
...@@ -62,7 +62,7 @@ CONFIG_RT_USING_DEVICE=y ...@@ -62,7 +62,7 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128 CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1" CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
CONFIG_RT_VER_NUM=0x40000 CONFIG_RT_VER_NUM=0x40001
CONFIG_ARCH_ARM=y CONFIG_ARCH_ARM=y
CONFIG_ARCH_ARM_CORTEX_M=y CONFIG_ARCH_ARM_CORTEX_M=y
CONFIG_ARCH_ARM_CORTEX_M7=y CONFIG_ARCH_ARM_CORTEX_M7=y
...@@ -112,6 +112,7 @@ CONFIG_RT_USING_DEVICE_IPC=y ...@@ -112,6 +112,7 @@ CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512 CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y CONFIG_RT_USING_SERIAL=y
CONFIG_RT_SERIAL_USING_DMA=y CONFIG_RT_SERIAL_USING_DMA=y
CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set # CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set # CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set # CONFIG_RT_USING_CPUTIME is not set
...@@ -128,6 +129,7 @@ CONFIG_RT_USING_PIN=y ...@@ -128,6 +129,7 @@ CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_SPI is not set # CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set # CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set # CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
# #
# Using WiFi # Using WiFi
...@@ -306,7 +308,10 @@ CONFIG_SOC_STM32F746NG=y ...@@ -306,7 +308,10 @@ CONFIG_SOC_STM32F746NG=y
# Onboard Peripheral Drivers # Onboard Peripheral Drivers
# #
CONFIG_BSP_USING_USB_TO_USART=y CONFIG_BSP_USING_USB_TO_USART=y
# CONFIG_BSP_USING_SDRAM is not set
# CONFIG_BSP_USING_QSPI_FLASH is not set # CONFIG_BSP_USING_QSPI_FLASH is not set
# CONFIG_BSP_USING_ETH is not set
# CONFIG_BSP_USING_SDCARD is not set
# #
# On-chip Peripheral Drivers # On-chip Peripheral Drivers
...@@ -316,6 +321,7 @@ CONFIG_BSP_USING_UART=y ...@@ -316,6 +321,7 @@ CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART1=y CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set # CONFIG_BSP_UART1_RX_USING_DMA is not set
# CONFIG_BSP_USING_QSPI is not set # CONFIG_BSP_USING_QSPI is not set
# CONFIG_BSP_USING_SDIO is not set
# #
# Board extended module Drivers # Board extended module Drivers
......
bsp/stm32/stm32f746-st-disco/README.md
浏览文件 @ 1d1f272f
...@@ -39,10 +39,10 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板， ...@@ -39,10 +39,10 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，
| **板载外设** | **支持情况** | **备注** | | **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- | | :----------------- | :----------: | :------------------------------------- |
| USB 转串口 | 支持 | UART1 | | USB 转串口 | 支持 | UART1 |
| QSPI Flash | 支持 | | | QSPI Flash | 支持 | QSPI1 |
| 以太网 | 暂不支持 | | | 以太网 | 支持 | RMII |
| SDRAM | 暂不支持 | | | SDRAM | 支持 | SDRAM1 |
| SD卡 | 暂不支持 | | | SD卡 | 支持 | SD 4bits |
| 4.3寸电容屏 | 暂不支持 | | | 4.3寸电容屏 | 暂不支持 | |
| MEMS麦克风 | 暂不支持 | | | MEMS麦克风 | 暂不支持 | |
...@@ -55,7 +55,7 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板， ...@@ -55,7 +55,7 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，
| I2C | 暂不支持 | 即将支持 | | I2C | 暂不支持 | 即将支持 |
| FLASH | 暂不支持 | 即将支持 | | FLASH | 暂不支持 | 即将支持 |
| WDT | 暂不支持 | 即将支持 | | WDT | 暂不支持 | 即将支持 |
| SDIO | 暂不支持 | 即将支持 | | SDIO | 支持 | 支持 |
| USB Device | 暂不支持 | 即将支持 | | USB Device | 暂不支持 | 即将支持 |
| USB Host | 暂不支持 | 即将支持 | | USB Host | 暂不支持 | 即将支持 |
| SAI | 暂不支持 | 即将支持 | | SAI | 暂不支持 | 即将支持 |
......
bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/.mxproject
浏览文件 @ 1d1f272f
...@@ -5,9 +5,9 @@ SourcePath=E:/rt-thread/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src ...@@ -5,9 +5,9 @@ SourcePath=E:/rt-thread/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src
SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c; SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
[PreviousLibFiles] [PreviousLibFiles]
LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h; LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_fmc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sdram.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_sdmmc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sd.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_sdmmc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sd.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_eth.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_fmc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sdram.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_ll_sdmmc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_sd.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
[PreviousUsedKeilFiles] [PreviousUsedKeilFiles]
SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null; SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_sdmmc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sd.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_eth.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_fmc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sdram.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_ll_sdmmc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_sd.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null;
HeaderPath=..\Drivers\STM32F7xx_HAL_Driver\Inc;..\Drivers\STM32F7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F7xx\Include;..\Drivers\CMSIS\Include;..\Inc; HeaderPath=..\Drivers\STM32F7xx_HAL_Driver\Inc;..\Drivers\STM32F7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F7xx\Include;..\Drivers\CMSIS\Include;..\Inc;
bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc
浏览文件 @ 1d1f272f
#MicroXplorer Configuration settings - do not modify #MicroXplorer Configuration settings - do not modify
ETH.IPParameters=MediaInterface
ETH.MediaInterface=ETH_MEDIA_INTERFACE_RMII
File.Version=6 File.Version=6
KeepUserPlacement=false KeepUserPlacement=false
Mcu.Family=STM32F7 Mcu.Family=STM32F7
Mcu.IP0=CORTEX_M7 Mcu.IP0=CORTEX_M7
Mcu.IP1=NVIC Mcu.IP1=ETH
Mcu.IP2=QUADSPI Mcu.IP2=FMC
Mcu.IP3=RCC Mcu.IP3=NVIC
Mcu.IP4=SYS Mcu.IP4=QUADSPI
Mcu.IP5=USART1 Mcu.IP5=RCC
Mcu.IPNb=6 Mcu.IP6=SDMMC1
Mcu.IP7=SYS
Mcu.IP8=USART1
Mcu.IPNb=9
Mcu.Name=STM32F746NGHx Mcu.Name=STM32F746NGHx
Mcu.Package=TFBGA216 Mcu.Package=TFBGA216
Mcu.Pin0=PE2 Mcu.Pin0=PE2
Mcu.Pin1=PA14 Mcu.Pin1=PG14
Mcu.Pin10=PH1/OSC_OUT Mcu.Pin10=PD0
Mcu.Pin11=PJ8 Mcu.Pin11=PC11
Mcu.Pin12=PB2 Mcu.Pin12=PC10
Mcu.Pin13=PD12 Mcu.Pin13=PD1
Mcu.Pin14=PD13 Mcu.Pin14=PF0
Mcu.Pin15=PD11 Mcu.Pin15=PD2
Mcu.Pin16=VP_SYS_VS_Systick Mcu.Pin16=PC14/OSC32_IN
Mcu.Pin2=PA13 Mcu.Pin17=PF1
Mcu.Pin3=PB7 Mcu.Pin18=PA9
Mcu.Pin4=PB6 Mcu.Pin19=PC15/OSC32_OUT
Mcu.Pin5=PC14/OSC32_IN Mcu.Pin2=PC12
Mcu.Pin6=PA9 Mcu.Pin20=PK1
Mcu.Pin7=PC15/OSC32_OUT Mcu.Pin21=PC9
Mcu.Pin8=PK1 Mcu.Pin22=PH0/OSC_IN
Mcu.Pin9=PH0/OSC_IN Mcu.Pin23=PF2
Mcu.PinsNb=17 Mcu.Pin24=PC8
Mcu.Pin25=PH1/OSC_OUT
Mcu.Pin26=PF3
Mcu.Pin27=PJ8
Mcu.Pin28=PG8
Mcu.Pin29=PF4
Mcu.Pin3=PA14
Mcu.Pin30=PH5
Mcu.Pin31=PH3
Mcu.Pin32=PF5
Mcu.Pin33=PD15
Mcu.Pin34=PD10
Mcu.Pin35=PC3
Mcu.Pin36=PD14
Mcu.Pin37=PD9
Mcu.Pin38=PD8
Mcu.Pin39=PC1
Mcu.Pin4=PA13
Mcu.Pin40=PB2
Mcu.Pin41=PF12
Mcu.Pin42=PF15
Mcu.Pin43=PD12
Mcu.Pin44=PD13
Mcu.Pin45=PA1
Mcu.Pin46=PC4
Mcu.Pin47=PF13
Mcu.Pin48=PG0
Mcu.Pin49=PE8
Mcu.Pin5=PG13
Mcu.Pin50=PD11
Mcu.Pin51=PG5
Mcu.Pin52=PG4
Mcu.Pin53=PA2
Mcu.Pin54=PC5
Mcu.Pin55=PF14
Mcu.Pin56=PF11
Mcu.Pin57=PE9
Mcu.Pin58=PE11
Mcu.Pin59=PE14
Mcu.Pin6=PB7
Mcu.Pin60=PA7
Mcu.Pin61=PE7
Mcu.Pin62=PE10
Mcu.Pin63=PE12
Mcu.Pin64=PE15
Mcu.Pin65=PE13
Mcu.Pin66=VP_SYS_VS_Systick
Mcu.Pin7=PB6
Mcu.Pin8=PG15
Mcu.Pin9=PG11
Mcu.PinsNb=67
Mcu.ThirdPartyNb=0 Mcu.ThirdPartyNb=0
Mcu.UserConstants= Mcu.UserConstants=
Mcu.UserName=STM32F746NGHx Mcu.UserName=STM32F746NGHx
...@@ -44,10 +99,16 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 ...@@ -44,10 +99,16 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false
PA1.Mode=RMII
PA1.Signal=ETH_REF_CLK
PA13.Mode=Serial_Wire PA13.Mode=Serial_Wire
PA13.Signal=SYS_JTMS-SWDIO PA13.Signal=SYS_JTMS-SWDIO
PA14.Mode=Serial_Wire PA14.Mode=Serial_Wire
PA14.Signal=SYS_JTCK-SWCLK PA14.Signal=SYS_JTCK-SWCLK
PA2.Mode=RMII
PA2.Signal=ETH_MDIO
PA7.Mode=RMII
PA7.Signal=ETH_CRS_DV
PA9.Locked=true PA9.Locked=true
PA9.Mode=Asynchronous PA9.Mode=Asynchronous
PA9.Signal=USART1_TX PA9.Signal=USART1_TX
...@@ -57,10 +118,29 @@ PB6.Mode=Single Bank 1 ...@@ -57,10 +118,29 @@ PB6.Mode=Single Bank 1
PB6.Signal=QUADSPI_BK1_NCS PB6.Signal=QUADSPI_BK1_NCS
PB7.Mode=Asynchronous PB7.Mode=Asynchronous
PB7.Signal=USART1_RX PB7.Signal=USART1_RX
PC1.Mode=RMII
PC1.Signal=ETH_MDC
PC10.Mode=SD_4_bits_Wide_bus
PC10.Signal=SDMMC1_D2
PC11.Mode=SD_4_bits_Wide_bus
PC11.Signal=SDMMC1_D3
PC12.Mode=SD_4_bits_Wide_bus
PC12.Signal=SDMMC1_CK
PC14/OSC32_IN.Mode=LSE-External-Oscillator PC14/OSC32_IN.Mode=LSE-External-Oscillator
PC14/OSC32_IN.Signal=RCC_OSC32_IN PC14/OSC32_IN.Signal=RCC_OSC32_IN
PC15/OSC32_OUT.Mode=LSE-External-Oscillator PC15/OSC32_OUT.Mode=LSE-External-Oscillator
PC15/OSC32_OUT.Signal=RCC_OSC32_OUT PC15/OSC32_OUT.Signal=RCC_OSC32_OUT
PC3.Locked=true
PC3.Mode=SdramChipSelect1_1
PC3.Signal=FMC_SDCKE0
PC4.Mode=RMII
PC4.Signal=ETH_RXD0
PC5.Mode=RMII
PC5.Signal=ETH_RXD1
PC8.Mode=SD_4_bits_Wide_bus
PC8.Signal=SDMMC1_D0
PC9.Mode=SD_4_bits_Wide_bus
PC9.Signal=SDMMC1_D1
PCC.Checker=false PCC.Checker=false
PCC.Line=STM32F7x6 PCC.Line=STM32F7x6
PCC.MCU=STM32F746NGHx PCC.MCU=STM32F746NGHx
...@@ -69,6 +149,9 @@ PCC.Seq0=0 ...@@ -69,6 +149,9 @@ PCC.Seq0=0
PCC.Series=STM32F7 PCC.Series=STM32F7
PCC.Temperature=25 PCC.Temperature=25
PCC.Vdd=3.3 PCC.Vdd=3.3
PD0.Signal=FMC_D2_DA2
PD1.Signal=FMC_D3_DA3
PD10.Signal=FMC_D15_DA15
PD11.Locked=true PD11.Locked=true
PD11.Mode=Single Bank 1 PD11.Mode=Single Bank 1
PD11.Signal=QUADSPI_BK1_IO0 PD11.Signal=QUADSPI_BK1_IO0
...@@ -78,13 +161,53 @@ PD12.Signal=QUADSPI_BK1_IO1 ...@@ -78,13 +161,53 @@ PD12.Signal=QUADSPI_BK1_IO1
PD13.Locked=true PD13.Locked=true
PD13.Mode=Single Bank 1 PD13.Mode=Single Bank 1
PD13.Signal=QUADSPI_BK1_IO3 PD13.Signal=QUADSPI_BK1_IO3
PD14.Signal=FMC_D0_DA0
PD15.Signal=FMC_D1_DA1
PD2.Mode=SD_4_bits_Wide_bus
PD2.Signal=SDMMC1_CMD
PD8.Signal=FMC_D13_DA13
PD9.Signal=FMC_D14_DA14
PE10.Signal=FMC_D7_DA7
PE11.Signal=FMC_D8_DA8
PE12.Signal=FMC_D9_DA9
PE13.Signal=FMC_D10_DA10
PE14.Signal=FMC_D11_DA11
PE15.Signal=FMC_D12_DA12
PE2.Locked=true PE2.Locked=true
PE2.Mode=Single Bank 1 PE2.Mode=Single Bank 1
PE2.Signal=QUADSPI_BK1_IO2 PE2.Signal=QUADSPI_BK1_IO2
PE7.Signal=FMC_D4_DA4
PE8.Signal=FMC_D5_DA5
PE9.Signal=FMC_D6_DA6
PF0.Signal=FMC_A0
PF1.Signal=FMC_A1
PF11.Signal=FMC_SDNRAS
PF12.Signal=FMC_A6
PF13.Signal=FMC_A7
PF14.Signal=FMC_A8
PF15.Signal=FMC_A9
PF2.Signal=FMC_A2
PF3.Signal=FMC_A3
PF4.Signal=FMC_A4
PF5.Signal=FMC_A5
PG0.Signal=FMC_A10
PG11.Mode=RMII
PG11.Signal=ETH_TX_EN
PG13.Mode=RMII
PG13.Signal=ETH_TXD0
PG14.Mode=RMII
PG14.Signal=ETH_TXD1
PG15.Signal=FMC_SDNCAS
PG4.Signal=FMC_A14_BA0
PG5.Signal=FMC_A15_BA1
PG8.Signal=FMC_SDCLK
PH0/OSC_IN.Mode=HSE-External-Oscillator PH0/OSC_IN.Mode=HSE-External-Oscillator
PH0/OSC_IN.Signal=RCC_OSC_IN PH0/OSC_IN.Signal=RCC_OSC_IN
PH1/OSC_OUT.Mode=HSE-External-Oscillator PH1/OSC_OUT.Mode=HSE-External-Oscillator
PH1/OSC_OUT.Signal=RCC_OSC_OUT PH1/OSC_OUT.Signal=RCC_OSC_OUT
PH3.Mode=SdramChipSelect1_1
PH3.Signal=FMC_SDNE0
PH5.Signal=FMC_SDNWE
PJ8.Locked=true PJ8.Locked=true
PJ8.Signal=GPXTI8 PJ8.Signal=GPXTI8
PK1.Locked=true PK1.Locked=true
...@@ -117,71 +240,138 @@ ProjectManager.StackSize=0x400 ...@@ -117,71 +240,138 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5 ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation= ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_ETH_Init-ETH-false-HAL-true,7-MX_FMC_Init-FMC-false-HAL-true,8-MX_SDMMC1_SD_Init-SDMMC1-false-HAL-true
QUADSPI.ChipSelectHighTime=QSPI_CS_HIGH_TIME_6_CYCLE QUADSPI.ChipSelectHighTime=QSPI_CS_HIGH_TIME_6_CYCLE
QUADSPI.ClockPrescaler=1 QUADSPI.ClockPrescaler=1
QUADSPI.FifoThreshold=4 QUADSPI.FifoThreshold=4
QUADSPI.IPParameters=ClockPrescaler,FifoThreshold,SampleShifting,ChipSelectHighTime QUADSPI.IPParameters=ClockPrescaler,FifoThreshold,SampleShifting,ChipSelectHighTime
QUADSPI.SampleShifting=QSPI_SAMPLE_SHIFTING_HALFCYCLE QUADSPI.SampleShifting=QSPI_SAMPLE_SHIFTING_HALFCYCLE
RCC.AHBFreq_Value=216000000 RCC.AHBFreq_Value=50000000
RCC.APB1CLKDivider=RCC_HCLK_DIV4 RCC.APB1CLKDivider=RCC_HCLK_DIV4
RCC.APB1Freq_Value=54000000 RCC.APB1Freq_Value=12500000
RCC.APB1TimFreq_Value=108000000 RCC.APB1TimFreq_Value=25000000
RCC.APB2CLKDivider=RCC_HCLK_DIV2 RCC.APB2CLKDivider=RCC_HCLK_DIV2
RCC.APB2Freq_Value=108000000 RCC.APB2Freq_Value=25000000
RCC.APB2TimFreq_Value=216000000 RCC.APB2TimFreq_Value=50000000
RCC.CECFreq_Value=32786.88524590164 RCC.CECFreq_Value=32786.88524590164
RCC.CortexFreq_Value=216000000 RCC.CortexFreq_Value=50000000
RCC.EthernetFreq_Value=216000000 RCC.EthernetFreq_Value=50000000
RCC.FCLKCortexFreq_Value=216000000 RCC.FCLKCortexFreq_Value=50000000
RCC.FamilyName=M RCC.FamilyName=M
RCC.HCLKFreq_Value=216000000 RCC.HCLKFreq_Value=50000000
RCC.HSE_VALUE=25000000 RCC.HSE_VALUE=25000000
RCC.HSI_VALUE=16000000 RCC.HSI_VALUE=16000000
RCC.I2C1Freq_Value=54000000 RCC.I2C1Freq_Value=12500000
RCC.I2C2Freq_Value=54000000 RCC.I2C2Freq_Value=12500000
RCC.I2C3Freq_Value=54000000 RCC.I2C3Freq_Value=12500000
RCC.I2C4Freq_Value=54000000 RCC.I2C4Freq_Value=12500000
RCC.I2SFreq_Value=96000000 RCC.I2SFreq_Value=200000000
RCC.IPParameters=AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLN,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value RCC.IPParameters=AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CECFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,I2SFreq_Value,LCDTFToutputFreq_Value,LPTIM1Freq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SRoutputFreq_Value,PLLM,PLLN,PLLP,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLSAIPCLKFreq_Value,PLLSAIQCLKFreq_Value,PLLSAIRCLKFreq_Value,PLLSAIoutputFreq_Value,PLLSourceVirtual,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,UART7Freq_Value,UART8Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USART6Freq_Value,USBFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAIOutputFreq_Value
RCC.LCDTFToutputFreq_Value=48000000 RCC.LCDTFToutputFreq_Value=100000000
RCC.LPTIM1Freq_Value=54000000 RCC.LPTIM1Freq_Value=12500000
RCC.LSI_VALUE=32000 RCC.LSI_VALUE=32000
RCC.MCO2PinFreq_Value=216000000 RCC.MCO2PinFreq_Value=50000000
RCC.PLLCLKFreq_Value=216000000 RCC.PLLCLKFreq_Value=50000000
RCC.PLLI2SPCLKFreq_Value=96000000 RCC.PLLI2SPCLKFreq_Value=200000000
RCC.PLLI2SQCLKFreq_Value=96000000 RCC.PLLI2SQCLKFreq_Value=200000000
RCC.PLLI2SRCLKFreq_Value=96000000 RCC.PLLI2SRCLKFreq_Value=200000000
RCC.PLLI2SRoutputFreq_Value=96000000 RCC.PLLI2SRoutputFreq_Value=200000000
RCC.PLLM=25 RCC.PLLM=12
RCC.PLLN=432 RCC.PLLN=96
RCC.PLLQCLKFreq_Value=216000000 RCC.PLLP=RCC_PLLP_DIV4
RCC.PLLQoutputFreq_Value=216000000 RCC.PLLQCLKFreq_Value=100000000
RCC.PLLSAIPCLKFreq_Value=96000000 RCC.PLLQoutputFreq_Value=100000000
RCC.PLLSAIQCLKFreq_Value=96000000 RCC.PLLSAIPCLKFreq_Value=200000000
RCC.PLLSAIRCLKFreq_Value=96000000 RCC.PLLSAIQCLKFreq_Value=200000000
RCC.PLLSAIoutputFreq_Value=96000000 RCC.PLLSAIRCLKFreq_Value=200000000
RCC.PLLSAIoutputFreq_Value=200000000
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
RCC.RNGFreq_Value=216000000 RCC.RNGFreq_Value=100000000
RCC.SAI1Freq_Value=96000000 RCC.SAI1Freq_Value=200000000
RCC.SAI2Freq_Value=96000000 RCC.SAI2Freq_Value=200000000
RCC.SDMMCFreq_Value=216000000 RCC.SDMMCFreq_Value=50000000
RCC.SPDIFRXFreq_Value=96000000 RCC.SPDIFRXFreq_Value=200000000
RCC.SYSCLKFreq_VALUE=216000000 RCC.SYSCLKFreq_VALUE=50000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.UART4Freq_Value=54000000 RCC.UART4Freq_Value=12500000
RCC.UART5Freq_Value=54000000 RCC.UART5Freq_Value=12500000
RCC.UART7Freq_Value=54000000 RCC.UART7Freq_Value=12500000
RCC.UART8Freq_Value=54000000 RCC.UART8Freq_Value=12500000
RCC.USART1Freq_Value=108000000 RCC.USART1Freq_Value=25000000
RCC.USART2Freq_Value=54000000 RCC.USART2Freq_Value=12500000
RCC.USART3Freq_Value=54000000 RCC.USART3Freq_Value=12500000
RCC.USART6Freq_Value=108000000 RCC.USART6Freq_Value=25000000
RCC.USBFreq_Value=216000000 RCC.USBFreq_Value=100000000
RCC.VCOI2SOutputFreq_Value=192000000 RCC.VCOI2SOutputFreq_Value=400000000
RCC.VCOInputFreq_Value=1000000 RCC.VCOInputFreq_Value=2083333.3333333333
RCC.VCOOutputFreq_Value=432000000 RCC.VCOOutputFreq_Value=200000000
RCC.VCOSAIOutputFreq_Value=192000000 RCC.VCOSAIOutputFreq_Value=400000000
SH.FMC_A0.0=FMC_A0,11b-sda1
SH.FMC_A0.ConfNb=1
SH.FMC_A1.0=FMC_A1,11b-sda1
SH.FMC_A1.ConfNb=1
SH.FMC_A10.0=FMC_A10,11b-sda1
SH.FMC_A10.ConfNb=1
SH.FMC_A14_BA0.0=FMC_BA0,FourSdramBanks1
SH.FMC_A14_BA0.ConfNb=1
SH.FMC_A15_BA1.0=FMC_BA1,FourSdramBanks1
SH.FMC_A15_BA1.ConfNb=1
SH.FMC_A2.0=FMC_A2,11b-sda1
SH.FMC_A2.ConfNb=1
SH.FMC_A3.0=FMC_A3,11b-sda1
SH.FMC_A3.ConfNb=1
SH.FMC_A4.0=FMC_A4,11b-sda1
SH.FMC_A4.ConfNb=1
SH.FMC_A5.0=FMC_A5,11b-sda1
SH.FMC_A5.ConfNb=1
SH.FMC_A6.0=FMC_A6,11b-sda1
SH.FMC_A6.ConfNb=1
SH.FMC_A7.0=FMC_A7,11b-sda1
SH.FMC_A7.ConfNb=1
SH.FMC_A8.0=FMC_A8,11b-sda1
SH.FMC_A8.ConfNb=1
SH.FMC_A9.0=FMC_A9,11b-sda1
SH.FMC_A9.ConfNb=1
SH.FMC_D0_DA0.0=FMC_D0,sd-16b-d1
SH.FMC_D0_DA0.ConfNb=1
SH.FMC_D10_DA10.0=FMC_D10,sd-16b-d1
SH.FMC_D10_DA10.ConfNb=1
SH.FMC_D11_DA11.0=FMC_D11,sd-16b-d1
SH.FMC_D11_DA11.ConfNb=1
SH.FMC_D12_DA12.0=FMC_D12,sd-16b-d1
SH.FMC_D12_DA12.ConfNb=1
SH.FMC_D13_DA13.0=FMC_D13,sd-16b-d1
SH.FMC_D13_DA13.ConfNb=1
SH.FMC_D14_DA14.0=FMC_D14,sd-16b-d1
SH.FMC_D14_DA14.ConfNb=1
SH.FMC_D15_DA15.0=FMC_D15,sd-16b-d1
SH.FMC_D15_DA15.ConfNb=1
SH.FMC_D1_DA1.0=FMC_D1,sd-16b-d1
SH.FMC_D1_DA1.ConfNb=1
SH.FMC_D2_DA2.0=FMC_D2,sd-16b-d1
SH.FMC_D2_DA2.ConfNb=1
SH.FMC_D3_DA3.0=FMC_D3,sd-16b-d1
SH.FMC_D3_DA3.ConfNb=1
SH.FMC_D4_DA4.0=FMC_D4,sd-16b-d1
SH.FMC_D4_DA4.ConfNb=1
SH.FMC_D5_DA5.0=FMC_D5,sd-16b-d1
SH.FMC_D5_DA5.ConfNb=1
SH.FMC_D6_DA6.0=FMC_D6,sd-16b-d1
SH.FMC_D6_DA6.ConfNb=1
SH.FMC_D7_DA7.0=FMC_D7,sd-16b-d1
SH.FMC_D7_DA7.ConfNb=1
SH.FMC_D8_DA8.0=FMC_D8,sd-16b-d1
SH.FMC_D8_DA8.ConfNb=1
SH.FMC_D9_DA9.0=FMC_D9,sd-16b-d1
SH.FMC_D9_DA9.ConfNb=1
SH.FMC_SDCLK.0=FMC_SDCLK,11b-sda1
SH.FMC_SDCLK.ConfNb=1
SH.FMC_SDNCAS.0=FMC_SDNCAS,11b-sda1
SH.FMC_SDNCAS.ConfNb=1
SH.FMC_SDNRAS.0=FMC_SDNRAS,11b-sda1
SH.FMC_SDNRAS.ConfNb=1
SH.FMC_SDNWE.0=FMC_SDNWE,11b-sda1
SH.FMC_SDNWE.ConfNb=1
SH.GPXTI8.0=GPIO_EXTI8 SH.GPXTI8.0=GPIO_EXTI8
SH.GPXTI8.ConfNb=1 SH.GPXTI8.ConfNb=1
USART1.IPParameters=VirtualMode-Asynchronous USART1.IPParameters=VirtualMode-Asynchronous
......
bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Inc/stm32f7xx_hal_conf.h
浏览文件 @ 1d1f272f
...@@ -58,11 +58,11 @@ ...@@ -58,11 +58,11 @@
/* #define HAL_DAC_MODULE_ENABLED */ /* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */ /* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */ #define HAL_ETH_MODULE_ENABLED
/* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */ #define HAL_SDRAM_MODULE_ENABLED
/* #define HAL_HASH_MODULE_ENABLED */ /* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */
...@@ -72,7 +72,7 @@ ...@@ -72,7 +72,7 @@
/* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */ #define HAL_SD_MODULE_ENABLED
/* #define HAL_MMC_MODULE_ENABLED */ /* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */ /* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */ /* #define HAL_SPI_MODULE_ENABLED */
...@@ -190,8 +190,8 @@ ...@@ -190,8 +190,8 @@
/* Section 2: PHY configuration section */ /* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/ /* LAN8742A_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U #define LAN8742A_PHY_ADDRESS 1
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) #define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */ /* PHY Configuration delay */
...@@ -202,8 +202,8 @@ ...@@ -202,8 +202,8 @@
/* Section 3: Common PHY Registers */ /* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ #define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ #define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ #define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ #define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
...@@ -226,6 +226,9 @@ ...@@ -226,6 +226,9 @@
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
#define PHY_ISFR ((uint16_t)0x000BU) /*!< PHY Interrupt Source Flag register Offset */
#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */
/* ################## SPI peripheral configuration ########################## */ /* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
......
bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/main.c
浏览文件 @ 1d1f272f
...@@ -63,10 +63,16 @@ ...@@ -63,10 +63,16 @@
/* Private variables ---------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/
ETH_HandleTypeDef heth;
QSPI_HandleTypeDef hqspi; QSPI_HandleTypeDef hqspi;
SD_HandleTypeDef hsd1;
UART_HandleTypeDef huart1; UART_HandleTypeDef huart1;
SDRAM_HandleTypeDef hsdram1;
/* USER CODE BEGIN PV */ /* USER CODE BEGIN PV */
/* USER CODE END PV */ /* USER CODE END PV */
...@@ -76,6 +82,9 @@ void SystemClock_Config(void); ...@@ -76,6 +82,9 @@ void SystemClock_Config(void);
static void MX_GPIO_Init(void); static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void); static void MX_USART1_UART_Init(void);
static void MX_QUADSPI_Init(void); static void MX_QUADSPI_Init(void);
static void MX_ETH_Init(void);
static void MX_FMC_Init(void);
static void MX_SDMMC1_SD_Init(void);
/* USER CODE BEGIN PFP */ /* USER CODE BEGIN PFP */
/* USER CODE END PFP */ /* USER CODE END PFP */
...@@ -115,6 +124,9 @@ int main(void) ...@@ -115,6 +124,9 @@ int main(void)
MX_GPIO_Init(); MX_GPIO_Init();
MX_USART1_UART_Init(); MX_USART1_UART_Init();
MX_QUADSPI_Init(); MX_QUADSPI_Init();
MX_ETH_Init();
MX_FMC_Init();
MX_SDMMC1_SD_Init();
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */
/* USER CODE END 2 */ /* USER CODE END 2 */
...@@ -146,27 +158,21 @@ void SystemClock_Config(void) ...@@ -146,27 +158,21 @@ void SystemClock_Config(void)
/**Configure the main internal regulator output voltage /**Configure the main internal regulator output voltage
*/ */
__HAL_RCC_PWR_CLK_ENABLE(); __HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3);
/**Initializes the CPU, AHB and APB busses clocks /**Initializes the CPU, AHB and APB busses clocks
*/ */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 25; RCC_OscInitStruct.PLL.PLLM = 12;
RCC_OscInitStruct.PLL.PLLN = 432; RCC_OscInitStruct.PLL.PLLN = 96;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
RCC_OscInitStruct.PLL.PLLQ = 2; RCC_OscInitStruct.PLL.PLLQ = 2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
/**Activate the Over-Drive mode
*/
if (HAL_PWREx_EnableOverDrive() != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks /**Initializes the CPU, AHB and APB busses clocks
*/ */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
...@@ -176,18 +182,64 @@ void SystemClock_Config(void) ...@@ -176,18 +182,64 @@ void SystemClock_Config(void)
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_SDMMC1;
PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
PeriphClkInitStruct.Sdmmc1ClockSelection = RCC_SDMMC1CLKSOURCE_SYSCLK;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
{ {
Error_Handler(); Error_Handler();
} }
} }
/**
* @brief ETH Initialization Function
* @param None
* @retval None
*/
static void MX_ETH_Init(void)
{
/* USER CODE BEGIN ETH_Init 0 */
/* USER CODE END ETH_Init 0 */
uint8_t MACAddr[6] ;
/* USER CODE BEGIN ETH_Init 1 */
/* USER CODE END ETH_Init 1 */
heth.Instance = ETH;
heth.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;
heth.Init.PhyAddress = LAN8742A_PHY_ADDRESS;
MACAddr[0] = 0x00;
MACAddr[1] = 0x80;
MACAddr[2] = 0xE1;
MACAddr[3] = 0x00;
MACAddr[4] = 0x00;
MACAddr[5] = 0x00;
heth.Init.MACAddr = &MACAddr[0];
heth.Init.RxMode = ETH_RXPOLLING_MODE;
heth.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;
heth.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;
/* USER CODE BEGIN MACADDRESS */
/* USER CODE END MACADDRESS */
if (HAL_ETH_Init(&heth) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ETH_Init 2 */
/* USER CODE END ETH_Init 2 */
}
/** /**
* @brief QUADSPI Initialization Function * @brief QUADSPI Initialization Function
* @param None * @param None
...@@ -223,6 +275,42 @@ static void MX_QUADSPI_Init(void) ...@@ -223,6 +275,42 @@ static void MX_QUADSPI_Init(void)
} }
/**
* @brief SDMMC1 Initialization Function
* @param None
* @retval None
*/
static void MX_SDMMC1_SD_Init(void)
{
/* USER CODE BEGIN SDMMC1_Init 0 */
/* USER CODE END SDMMC1_Init 0 */
/* USER CODE BEGIN SDMMC1_Init 1 */
/* USER CODE END SDMMC1_Init 1 */
hsd1.Instance = SDMMC1;
hsd1.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING;
hsd1.Init.ClockBypass = SDMMC_CLOCK_BYPASS_DISABLE;
hsd1.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE;
hsd1.Init.BusWide = SDMMC_BUS_WIDE_1B;
hsd1.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
hsd1.Init.ClockDiv = 0;
if (HAL_SD_Init(&hsd1) != HAL_OK)
{
Error_Handler();
}
if (HAL_SD_ConfigWideBusOperation(&hsd1, SDMMC_BUS_WIDE_4B) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SDMMC1_Init 2 */
/* USER CODE END SDMMC1_Init 2 */
}
/** /**
* @brief USART1 Initialization Function * @brief USART1 Initialization Function
* @param None * @param None
...@@ -258,6 +346,41 @@ static void MX_USART1_UART_Init(void) ...@@ -258,6 +346,41 @@ static void MX_USART1_UART_Init(void)
} }
/* FMC initialization function */
static void MX_FMC_Init(void)
{
FMC_SDRAM_TimingTypeDef SdramTiming;
/** Perform the SDRAM1 memory initialization sequence
*/
hsdram1.Instance = FMC_SDRAM_DEVICE;
/* hsdram1.Init */
hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_11;
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_1;
hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_DISABLE;
hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE;
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
/* SdramTiming */
SdramTiming.LoadToActiveDelay = 16;
SdramTiming.ExitSelfRefreshDelay = 16;
SdramTiming.SelfRefreshTime = 16;
SdramTiming.RowCycleDelay = 16;
SdramTiming.WriteRecoveryTime = 16;
SdramTiming.RPDelay = 16;
SdramTiming.RCDDelay = 16;
if (HAL_SDRAM_Init(&hsdram1, &SdramTiming) != HAL_OK)
{
Error_Handler( );
}
}
/** /**
* @brief GPIO Initialization Function * @brief GPIO Initialization Function
* @param None * @param None
...@@ -269,13 +392,15 @@ static void MX_GPIO_Init(void) ...@@ -269,13 +392,15 @@ static void MX_GPIO_Init(void)
/* GPIO Ports Clock Enable */ /* GPIO Ports Clock Enable */
__HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOK_CLK_ENABLE(); __HAL_RCC_GPIOK_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOJ_CLK_ENABLE(); __HAL_RCC_GPIOJ_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/*Configure GPIO pin : PK1 */ /*Configure GPIO pin : PK1 */
GPIO_InitStruct.Pin = GPIO_PIN_1; GPIO_InitStruct.Pin = GPIO_PIN_1;
......
bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c
浏览文件 @ 1d1f272f
...@@ -97,6 +97,108 @@ void HAL_MspInit(void) ...@@ -97,6 +97,108 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */ /* USER CODE END MspInit 1 */
} }
/**
* @brief ETH MSP Initialization
* This function configures the hardware resources used in this example
* @param heth: ETH handle pointer
* @retval None
*/
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(heth->Instance==ETH)
{
/* USER CODE BEGIN ETH_MspInit 0 */
/* USER CODE END ETH_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ETH_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**ETH GPIO Configuration
PG14 ------> ETH_TXD1
PG13 ------> ETH_TXD0
PG11 ------> ETH_TX_EN
PC1 ------> ETH_MDC
PA1 ------> ETH_REF_CLK
PC4 ------> ETH_RXD0
PA2 ------> ETH_MDIO
PC5 ------> ETH_RXD1
PA7 ------> ETH_CRS_DV
*/
GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN ETH_MspInit 1 */
/* USER CODE END ETH_MspInit 1 */
}
}
/**
* @brief ETH MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param heth: ETH handle pointer
* @retval None
*/
void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
{
if(heth->Instance==ETH)
{
/* USER CODE BEGIN ETH_MspDeInit 0 */
/* USER CODE END ETH_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ETH_CLK_DISABLE();
/**ETH GPIO Configuration
PG14 ------> ETH_TXD1
PG13 ------> ETH_TXD0
PG11 ------> ETH_TX_EN
PC1 ------> ETH_MDC
PA1 ------> ETH_REF_CLK
PC4 ------> ETH_RXD0
PA2 ------> ETH_MDIO
PC5 ------> ETH_RXD1
PA7 ------> ETH_CRS_DV
*/
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
/* USER CODE BEGIN ETH_MspDeInit 1 */
/* USER CODE END ETH_MspDeInit 1 */
}
}
/** /**
* @brief QSPI MSP Initialization * @brief QSPI MSP Initialization
* This function configures the hardware resources used in this example * This function configures the hardware resources used in this example
...@@ -200,6 +302,94 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi) ...@@ -200,6 +302,94 @@ void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
} }
/**
* @brief SD MSP Initialization
* This function configures the hardware resources used in this example
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hsd->Instance==SDMMC1)
{
/* USER CODE BEGIN SDMMC1_MspInit 0 */
/* USER CODE END SDMMC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SDMMC1_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**SDMMC1 GPIO Configuration
PC12 ------> SDMMC1_CK
PC11 ------> SDMMC1_D3
PC10 ------> SDMMC1_D2
PD2 ------> SDMMC1_CMD
PC9 ------> SDMMC1_D1
PC8 ------> SDMMC1_D0
*/
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDMMC1;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDMMC1;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN SDMMC1_MspInit 1 */
/* USER CODE END SDMMC1_MspInit 1 */
}
}
/**
* @brief SD MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
{
if(hsd->Instance==SDMMC1)
{
/* USER CODE BEGIN SDMMC1_MspDeInit 0 */
/* USER CODE END SDMMC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SDMMC1_CLK_DISABLE();
/**SDMMC1 GPIO Configuration
PC12 ------> SDMMC1_CK
PC11 ------> SDMMC1_D3
PC10 ------> SDMMC1_D2
PD2 ------> SDMMC1_CMD
PC9 ------> SDMMC1_D1
PC8 ------> SDMMC1_D0
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
/* USER CODE BEGIN SDMMC1_MspDeInit 1 */
/* USER CODE END SDMMC1_MspDeInit 1 */
}
}
/** /**
* @brief UART MSP Initialization * @brief UART MSP Initialization
* This function configures the hardware resources used in this example * This function configures the hardware resources used in this example
...@@ -278,6 +468,203 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) ...@@ -278,6 +468,203 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
} }
static uint32_t FMC_Initialized = 0;
static void HAL_FMC_MspInit(void){
/* USER CODE BEGIN FMC_MspInit 0 */
/* USER CODE END FMC_MspInit 0 */
GPIO_InitTypeDef GPIO_InitStruct;
if (FMC_Initialized) {
return;
}
FMC_Initialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_ENABLE();
/** FMC GPIO Configuration
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PD1 ------> FMC_D3
PF0 ------> FMC_A0
PF1 ------> FMC_A1
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH5 ------> FMC_SDNWE
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PC3 ------> FMC_SDCKE0
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF12 ------> FMC_A6
PF15 ------> FMC_A9
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_0|GPIO_PIN_5
|GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10
|GPIO_PIN_14|GPIO_PIN_9|GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14
|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15
|GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
/* USER CODE BEGIN FMC_MspInit 1 */
/* USER CODE END FMC_MspInit 1 */
}
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){
/* USER CODE BEGIN SDRAM_MspInit 0 */
/* USER CODE END SDRAM_MspInit 0 */
HAL_FMC_MspInit();
/* USER CODE BEGIN SDRAM_MspInit 1 */
/* USER CODE END SDRAM_MspInit 1 */
}
static uint32_t FMC_DeInitialized = 0;
static void HAL_FMC_MspDeInit(void){
/* USER CODE BEGIN FMC_MspDeInit 0 */
/* USER CODE END FMC_MspDeInit 0 */
if (FMC_DeInitialized) {
return;
}
FMC_DeInitialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FMC_CLK_DISABLE();
/** FMC GPIO Configuration
PG15 ------> FMC_SDNCAS
PD0 ------> FMC_D2
PD1 ------> FMC_D3
PF0 ------> FMC_A0
PF1 ------> FMC_A1
PF2 ------> FMC_A2
PF3 ------> FMC_A3
PG8 ------> FMC_SDCLK
PF4 ------> FMC_A4
PH5 ------> FMC_SDNWE
PH3 ------> FMC_SDNE0
PF5 ------> FMC_A5
PD15 ------> FMC_D1
PD10 ------> FMC_D15
PC3 ------> FMC_SDCKE0
PD14 ------> FMC_D0
PD9 ------> FMC_D14
PD8 ------> FMC_D13
PF12 ------> FMC_A6
PF15 ------> FMC_A9
PF13 ------> FMC_A7
PG0 ------> FMC_A10
PE8 ------> FMC_D5
PG5 ------> FMC_BA1
PG4 ------> FMC_BA0
PF14 ------> FMC_A8
PF11 ------> FMC_SDNRAS
PE9 ------> FMC_D6
PE11 ------> FMC_D8
PE14 ------> FMC_D11
PE7 ------> FMC_D4
PE10 ------> FMC_D7
PE12 ------> FMC_D9
PE15 ------> FMC_D12
PE13 ------> FMC_D10
*/
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_0|GPIO_PIN_5
|GPIO_PIN_4);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_15|GPIO_PIN_10
|GPIO_PIN_14|GPIO_PIN_9|GPIO_PIN_8);
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_5|GPIO_PIN_3);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14
|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_12|GPIO_PIN_15
|GPIO_PIN_13);
/* USER CODE BEGIN FMC_MspDeInit 1 */
/* USER CODE END FMC_MspDeInit 1 */
}
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){
/* USER CODE BEGIN SDRAM_MspDeInit 0 */
/* USER CODE END SDRAM_MspDeInit 0 */
HAL_FMC_MspDeInit();
/* USER CODE BEGIN SDRAM_MspDeInit 1 */
/* USER CODE END SDRAM_MspDeInit 1 */
}
/* USER CODE BEGIN 1 */ /* USER CODE BEGIN 1 */
/* USER CODE END 1 */ /* USER CODE END 1 */
......
bsp/stm32/stm32f746-st-disco/board/Kconfig
浏览文件 @ 1d1f272f
...@@ -11,6 +11,11 @@ menu "Onboard Peripheral Drivers" ...@@ -11,6 +11,11 @@ menu "Onboard Peripheral Drivers"
select BSP_USING_UART select BSP_USING_UART
select BSP_USING_UART1 select BSP_USING_UART1
default y default y
config BSP_USING_SDRAM
bool "Enable SDRAM"
default n
config BSP_USING_QSPI_FLASH config BSP_USING_QSPI_FLASH
bool "Enable QSPI FLASH (N25Q256 qspi1)" bool "Enable QSPI FLASH (N25Q256 qspi1)"
select BSP_USING_QSPI select BSP_USING_QSPI
...@@ -18,6 +23,22 @@ menu "Onboard Peripheral Drivers" ...@@ -18,6 +23,22 @@ menu "Onboard Peripheral Drivers"
select RT_SFUD_USING_QSPI select RT_SFUD_USING_QSPI
default n default n
config PHY_USING_LAN8720A
bool
config BSP_USING_ETH
bool "Enable Ethernet"
select RT_USING_LWIP
select PHY_USING_LAN8720A
default n
config BSP_USING_SDCARD
bool "Enable SDCARD (sdio)"
select BSP_USING_SDIO
select RT_USING_DFS
select RT_USING_DFS_ELMFAT
default n
endmenu endmenu
menu "On-chip Peripheral Drivers" menu "On-chip Peripheral Drivers"
...@@ -46,6 +67,12 @@ menu "On-chip Peripheral Drivers" ...@@ -46,6 +67,12 @@ menu "On-chip Peripheral Drivers"
select RT_USING_SPI select RT_USING_SPI
default n default n
config BSP_USING_SDIO
bool "Enable SDIO"
select RT_USING_SDIO
select RT_USING_DFS
default n
endmenu endmenu
menu "Board extended module Drivers" menu "Board extended module Drivers"
......
bsp/stm32/stm32f746-st-disco/board/SConscript
浏览文件 @ 1d1f272f
...@@ -7,8 +7,16 @@ cwd = GetCurrentDir() ...@@ -7,8 +7,16 @@ cwd = GetCurrentDir()
src = Glob('board.c') src = Glob('board.c')
src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c') src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c')
if GetDepend(['BSP_USING_ETH']):
src += Glob('ports/phy_reset.c')
if GetDepend(['BSP_USING_QSPI_FLASH']): if GetDepend(['BSP_USING_QSPI_FLASH']):
src += Glob('ports/drv_qspi_flash.c') src += Glob('ports/drv_qspi_flash.c')
if GetDepend(['BSP_USING_SDCARD']):
src += Glob('ports/sdcard_port.c')
path = [cwd] path = [cwd]
path += [cwd + '/CubeMX_Config/Inc'] path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports'] path += [cwd + '/ports']
......
bsp/stm32/stm32f746-st-disco/board/ports/drv_qspi_flash.c
浏览文件 @ 1d1f272f
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
* *
* Change Logs: * Change Logs:
* Date Author Notes * Date Author Notes
* 2019-01-26 jinsheng first version * 2019-01-26 jinsheng first version
*/ */
#include <board.h> #include <board.h>
......
bsp/stm32/stm32f746-st-disco/board/ports/phy_reset.c 0 → 100644
浏览文件 @ 1d1f272f
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-02-16 jinsheng first version
*/
#include <rtthread.h>
//#define DRV_DEBUG
#define LOG_TAG "drv.phy_reset"
#include <drv_log.h>
//PHY RESET PIN link system reset
/* phy reset */
void phy_reset(void)
{
}
bsp/stm32/stm32f746-st-disco/board/ports/sdcard_port.c 0 → 100644
浏览文件 @ 1d1f272f
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-02-17 jinsheng add sdcard port file
*/
#include <rtthread.h>
#ifdef BSP_USING_SDCARD
#include <dfs_elm.h>
#include <dfs_fs.h>
#include <dfs_posix.h>
#define DBG_ENABLE
#define DBG_SECTION_NAME "app.card"
#define DBG_COLOR
#define DBG_LEVEL DBG_INFO
#include <rtdbg.h>
void sd_mount(void *parameter)
{
while (1)
{
rt_thread_mdelay(500);
if(rt_device_find("sd0") != RT_NULL)
{
if (dfs_mount("sd0", "/", "elm", 0, 0) == RT_EOK)
{
LOG_I("sd card mount to '/'");
break;
}
else
{
LOG_W("sd card mount to '/' failed!");
}
}
}
}
int stm32_sdcard_mount(void)
{
rt_thread_t tid;
tid = rt_thread_create("sd_mount", sd_mount, RT_NULL,
1024, RT_THREAD_PRIORITY_MAX - 2, 20);
if (tid != RT_NULL)
{
rt_thread_startup(tid);
}
else
{
LOG_E("create sd_mount thread err!");
}
return RT_EOK;
}
INIT_APP_EXPORT(stm32_sdcard_mount);
#endif /* BSP_USING_SDCARD */
bsp/stm32/stm32f746-st-disco/board/ports/sdram_port.h 0 → 100644
浏览文件 @ 1d1f272f
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2019-02-16 jinsheng The first version for STM32F7xx
*/
#ifndef __SDRAM_PORT_H__
#define __SDRAM_PORT_H__
/* parameters for sdram peripheral */
/* Bank1 or Bank2 */
#define SDRAM_TARGET_BANK 1
/* stm32f7 Bank1:0XC0000000 Bank2:0XD0000000 */
#define SDRAM_BANK_ADDR ((uint32_t)0XC0000000)
/* data width: 8, 16, 32 */
#define SDRAM_DATA_WIDTH 16
/* column bit numbers: 8, 9, 10, 11 */
#define SDRAM_COLUMN_BITS 9
/* row bit numbers: 11, 12, 13 */
#define SDRAM_ROW_BITS 13
/* cas latency clock number: 1, 2, 3 */
#define SDRAM_CAS_LATENCY 3
/* read pipe delay: 0, 1, 2 */
#define SDRAM_RPIPE_DELAY 1
/* clock divid: 2, 3 */
#define SDCLOCK_PERIOD 2
/* refresh rate counter */
#define SDRAM_REFRESH_COUNT ((uint32_t)0x02AB)
#define SDRAM_SIZE ((uint32_t)0x1000000)
/* Timing configuration for MT48LC4M32B2B5-6A */
/* TMRD: 2 Clock cycles */
#define LOADTOACTIVEDELAY 2
/* TXSR: 7x11.90ns */
#define EXITSELFREFRESHDELAY 8
/* TRAS: 4x11.90ns */
#define SELFREFRESHTIME 6
/* TRC: 7x11.90ns */
#define ROWCYCLEDELAY 6
/* TWR: 2 Clock cycles */
#define WRITERECOVERYTIME 2
/* TRP: 2x11.90ns */
#define RPDELAY 2
/* TRCD: 2x11.90ns */
#define RCDDELAY 2
/* memory mode register */
#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
#endif
bsp/stm32/stm32f746-st-disco/rtconfig.h
浏览文件 @ 1d1f272f
...@@ -38,7 +38,7 @@ ...@@ -38,7 +38,7 @@
#define RT_USING_CONSOLE #define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128 #define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart1" #define RT_CONSOLE_DEVICE_NAME "uart1"
#define RT_VER_NUM 0x40000 #define RT_VER_NUM 0x40001
#define ARCH_ARM #define ARCH_ARM
#define ARCH_ARM_CORTEX_M #define ARCH_ARM_CORTEX_M
#define ARCH_ARM_CORTEX_M7 #define ARCH_ARM_CORTEX_M7
...@@ -78,6 +78,7 @@ ...@@ -78,6 +78,7 @@
#define RT_PIPE_BUFSZ 512 #define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL #define RT_USING_SERIAL
#define RT_SERIAL_USING_DMA #define RT_SERIAL_USING_DMA
#define RT_SERIAL_RB_BUFSZ 64
#define RT_USING_PIN #define RT_USING_PIN
/* Using WiFi */ /* Using WiFi */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或